From 02b3cc1d09f6b9f2a19edf5f268cc022dfff54fe Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Sun, 20 Aug 2006 19:10:35 +0000 Subject: Update of POT and PO files for the manual --- po/hu/boot-new.po | 283 ++++++-- po/hu/hardware.po | 1356 ++++++++++++++++++++++++++----------- po/hu/post-install.po | 672 +++++++++++++++--- po/ro/using-d-i.po | 1794 +++++++++++++++++++++++++++++++++++++++++-------- 4 files changed, 3324 insertions(+), 781 deletions(-) diff --git a/po/hu/boot-new.po b/po/hu/boot-new.po index a7d412315..e200f8a46 100644 --- a/po/hu/boot-new.po +++ b/po/hu/boot-new.po @@ -1,12 +1,13 @@ msgid "" msgstr "" "Project-Id-Version: \n" -"POT-Creation-Date: \n" +"Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n" +"POT-Creation-Date: 2006-08-05 12:45+0000\n" "PO-Revision-Date: 2006-08-20 12:15+0100\n" "Last-Translator: SZERVÁC Attila \n" "Language-Team: hu\n" "MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=utf-8\n" +"Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Poedit-Language: Hungarian\n" @@ -27,14 +28,34 @@ msgstr "Az igazság pillanata" #. Tag: para #: boot-new.xml:8 #, no-c-format -msgid "Your system's first boot on its own power is what electrical engineers call the smoke test." -msgstr "A rendszer 1. önálló indítása olyasmi, amit a mérnökök úgy hívnak: tűzpróba." +msgid "" +"Your system's first boot on its own power is what electrical engineers call " +"the smoke test." +msgstr "" +"A rendszer 1. önálló indítása olyasmi, amit a mérnökök úgy hívnak: " +"tűzpróba." #. Tag: para #: boot-new.xml:13 #, no-c-format -msgid "If you are booting directly into Debian, and the system doesn't start up, either use your original installation boot media, or insert the custom boot floppy if you have one, and reset your system. This way, you will probably need to add some boot arguments like root=root, where root is your root partition, such as /dev/sda1. Alternatively, see for instructions on using the installer's built-in rescue mode." -msgstr "Ha kiválasztottad a Debian indítását, és a rendszer mégsem indul, használhatod a telepítő médiát vagy flopit. Ekkor valószínűleg meg kell adnod 1-2 indítási argumentumot, leginkább egy ilyet: root=gyökér, where gyökér a telepített rendszer gyökér-partíciója, például /dev/sda1. Módfelett ajánljuk, olvasd el a részt a telepítő beépített mentő módja lehetőségeinek ismertetéséért." +msgid "" +"If you are booting directly into Debian, and the system doesn't start up, " +"either use your original installation boot media, or insert the custom boot " +"floppy if you have one, and reset your system. This way, you will probably " +"need to add some boot arguments like root=root, where root is your root " +"partition, such as /dev/sda1. Alternatively, see for instructions on using the installer's built-in " +"rescue mode." +msgstr "" +"Ha kiválasztottad a Debian indítását, és a rendszer mégsem indul, " +"használhatod a telepítő médiát vagy flopit. Ekkor valószínűleg meg kell " +"adnod 1-2 indítási argumentumot, leginkább egy ilyet: " +"root=gyökér, where " +"gyökér a telepített rendszer gyökér-partíciója, " +"például /dev/sda1. Módfelett ajánljuk, olvasd el a " +" részt a telepítő beépített mentő módja " +"lehetőségeinek ismertetéséért." #. Tag: title #: boot-new.xml:27 @@ -45,13 +66,18 @@ msgstr "" #. Tag: para #: boot-new.xml:28 #, no-c-format -msgid "If you have just performed a diskless install on a BVM or Motorola VMEbus machine: once the system has loaded the tftplilo program from the TFTP server, from the LILO Boot: prompt enter one of:" +msgid "" +"If you have just performed a diskless install on a BVM or Motorola VMEbus " +"machine: once the system has loaded the tftplilo program " +"from the TFTP server, from the LILO Boot: prompt enter one " +"of:" msgstr "" #. Tag: para #: boot-new.xml:36 #, no-c-format -msgid "b6000 followed by &enterkey; to boot a BVME 4000/6000" +msgid "" +"b6000 followed by &enterkey; to boot a BVME 4000/6000" msgstr "" #. Tag: para @@ -63,7 +89,8 @@ msgstr "" #. Tag: para #: boot-new.xml:46 #, no-c-format -msgid "b167 followed by &enterkey; to boot an MVME166/167" +msgid "" +"b167 followed by &enterkey; to boot an MVME166/167" msgstr "" #. Tag: title @@ -75,31 +102,54 @@ msgstr "" #. Tag: para #: boot-new.xml:60 #, no-c-format -msgid "Go to the directory containing the installation files and start up the Penguin booter, holding down the command key. Go to the Settings dialogue ( command T ), and locate the kernel options line which should look like root=/dev/ram video=font:VGA8x16 or similar." +msgid "" +"Go to the directory containing the installation files and start up the " +"Penguin booter, holding down the command " +"key. Go to the Settings dialogue ( " +"command T ), and locate the " +"kernel options line which should look like root=/dev/ram " +"video=font:VGA8x16 or similar." msgstr "" #. Tag: para #: boot-new.xml:70 #, no-c-format -msgid "You need to change the entry to root=/dev/yyyy. Replace the yyyy with the Linux name of the partition onto which you installed the system (e.g. /dev/sda1); you wrote this down earlier. The video=font:VGA8x8 is recommended especially for users with tiny screens. The kernel would pick a prettier (6x11) font but the console driver for this font can hang the machine, so using 8x16 or 8x8 is safer at this stage. You can change this at any time." +msgid "" +"You need to change the entry to root=/dev/yyyy. Replace the yyyy with " +"the Linux name of the partition onto which you installed the system (e.g. " +"/dev/sda1); you wrote this down earlier. The " +"video=font:VGA8x8 is recommended especially for users " +"with tiny screens. The kernel would pick a prettier (6x11) font but the " +"console driver for this font can hang the machine, so using 8x16 or 8x8 is " +"safer at this stage. You can change this at any time." msgstr "" #. Tag: para #: boot-new.xml:83 #, no-c-format -msgid "If you don't want to start GNU/Linux immediately each time you start, uncheck the Auto Boot option. Save your settings in the Prefs file using the Save Settings As Default option." +msgid "" +"If you don't want to start GNU/Linux immediately each time you start, " +"uncheck the Auto Boot option. Save your settings in " +"the Prefs file using the Save Settings As " +"Default option." msgstr "" #. Tag: para #: boot-new.xml:90 #, no-c-format -msgid "Now select Boot Now ( command B ) to start your freshly installed GNU/Linux instead of the RAMdisk installer system." +msgid "" +"Now select Boot Now ( command B ) to start your freshly installed GNU/" +"Linux instead of the RAMdisk installer system." msgstr "" #. Tag: para #: boot-new.xml:96 #, no-c-format -msgid "Debian should boot, and you should see the same messages as when you first booted the installation system, followed by some new messages." +msgid "" +"Debian should boot, and you should see the same messages as when you first " +"booted the installation system, followed by some new messages." msgstr "" #. Tag: title @@ -111,19 +161,42 @@ msgstr "" #. Tag: para #: boot-new.xml:107 #, no-c-format -msgid "If the machine fails to boot after completing the installation, and stops with a boot: prompt, try typing Linux followed by &enterkey;. (The default boot configuration in quik.conf is labeled Linux). The labels defined in quik.conf will be displayed if you press the Tab key at the boot: prompt. You can also try booting back into the installer, and editing the /target/etc/quik.conf placed there by the Install Quik on a Hard Disk step. Clues for dealing with quik are available at ." +msgid "" +"If the machine fails to boot after completing the installation, and stops " +"with a boot: prompt, try typing Linux followed by &enterkey;. (The default boot configuration in " +"quik.conf is labeled Linux). The labels defined in " +"quik.conf will be displayed if you press the " +"Tab key at the boot: prompt. You can also " +"try booting back into the installer, and editing the /target/etc/" +"quik.conf placed there by the Install Quik on a Hard " +"Disk step. Clues for dealing with quik are " +"available at ." msgstr "" #. Tag: para #: boot-new.xml:121 #, no-c-format -msgid "To boot back into MacOS without resetting the nvram, type bye at the OpenFirmware prompt (assuming MacOS has not been removed from the machine). To obtain an OpenFirmware prompt, hold down the command option o f keys while cold booting the machine. If you need to reset the OpenFirmware nvram changes to the MacOS default in order to boot back to MacOS, hold down the command option p r keys while cold booting the machine." +msgid "" +"To boot back into MacOS without resetting the nvram, type bye at the OpenFirmware prompt (assuming MacOS has not been removed " +"from the machine). To obtain an OpenFirmware prompt, hold down the " +" command option o f keys while cold booting the machine. " +"If you need to reset the OpenFirmware nvram changes to the MacOS default in " +"order to boot back to MacOS, hold down the command option p r keys while cold booting the machine." msgstr "" #. Tag: para #: boot-new.xml:134 #, no-c-format -msgid "If you use BootX to boot into the installed system, just select your desired kernel in the Linux Kernels folder, un-choose the ramdisk option, and add a root device corresponding to your installation; e.g. /dev/hda8." +msgid "" +"If you use BootX to boot into the installed system, just " +"select your desired kernel in the Linux Kernels folder, " +"un-choose the ramdisk option, and add a root device corresponding to your " +"installation; e.g. /dev/hda8." msgstr "" #. Tag: title @@ -135,31 +208,52 @@ msgstr "" #. Tag: para #: boot-new.xml:147 #, no-c-format -msgid "On G4 machines and iBooks, you can hold down the option key and get a graphical screen with a button for each bootable OS, &debian; will be a button with a small penguin icon." +msgid "" +"On G4 machines and iBooks, you can hold down the option key " +"and get a graphical screen with a button for each bootable OS, &debian; will " +"be a button with a small penguin icon." msgstr "" #. Tag: para #: boot-new.xml:154 #, no-c-format -msgid "If you kept MacOS and at some point it changes the OpenFirmware boot-device variable you should reset OpenFirmware to its default configuration. To do this hold down the command option p r keys while cold booting the machine." +msgid "" +"If you kept MacOS and at some point it changes the OpenFirmware boot-" +"device variable you should reset OpenFirmware to its default " +"configuration. To do this hold down the command " +"option p r " +"keys while cold booting the machine." msgstr "" #. Tag: para #: boot-new.xml:162 #, no-c-format -msgid "The labels defined in yaboot.conf will be displayed if you press the Tab key at the boot: prompt." +msgid "" +"The labels defined in yaboot.conf will be displayed if " +"you press the Tab key at the boot: prompt." msgstr "" #. Tag: para #: boot-new.xml:168 #, no-c-format -msgid "Resetting OpenFirmware on G3 or G4 hardware will cause it to boot &debian; by default (if you correctly partitioned and placed the Apple_Bootstrap partition first). If you have &debian; on a SCSI disk and MacOS on an IDE disk this may not work and you will have to enter OpenFirmware and set the boot-device variable, ybin normally does this automatically." +msgid "" +"Resetting OpenFirmware on G3 or G4 hardware will cause it to boot &debian; " +"by default (if you correctly partitioned and placed the Apple_Bootstrap " +"partition first). If you have &debian; on a SCSI disk and MacOS on an IDE " +"disk this may not work and you will have to enter OpenFirmware and set the " +"boot-device variable, ybin normally does " +"this automatically." msgstr "" #. Tag: para #: boot-new.xml:177 #, no-c-format -msgid "After you boot &debian; for the first time you can add any additional options you desire (such as dual boot options) to /etc/yaboot.conf and run ybin to update your boot partition with the changed configuration. Please read the yaboot HOWTO for more information." +msgid "" +"After you boot &debian; for the first time you can add any additional " +"options you desire (such as dual boot options) to /etc/yaboot." +"conf and run ybin to update your boot " +"partition with the changed configuration. Please read the yaboot HOWTO for more information." msgstr "" #. Tag: title @@ -171,7 +265,11 @@ msgstr "" #. Tag: para #: boot-new.xml:193 #, no-c-format -msgid "If you created encrypted volumes during the installation and assigned them mount points, you will be asked to enter the passphrase for each of these volumes during the boot. The actual procedure differs slightly between dm-crypt and loop-AES." +msgid "" +"If you created encrypted volumes during the installation and assigned them " +"mount points, you will be asked to enter the passphrase for each of these " +"volumes during the boot. The actual procedure differs slightly between dm-" +"crypt and loop-AES." msgstr "" #. Tag: title @@ -184,16 +282,32 @@ msgstr "" #: boot-new.xml:205 #, no-c-format msgid "" -"For partitions encrypted using dm-crypt you will be shown the following prompt during the boot: \n" +"For partitions encrypted using dm-crypt you will be shown the following " +"prompt during the boot: \n" "Starting early crypto disks... cryptX(starting)\n" "Enter LUKS passphrase:\n" -" In the first line of the prompt, X is the number of the loop device. You are now probably wondering for which volume you are actually entering the passphrase. Does it relate to your /home? Or to /var? Of course, if you have just one encrypted volume, this is easy and you can just enter the passphrase you used when setting up this volume. If you set up more than one encrypted volume during the installation, the notes you wrote down as the last step in come in handy. If you did not make a note of the mapping between cryptX and the mount points before, you can still find it in /etc/crypttab and /etc/fstab of your new system." +" In the first line of the prompt, X is the number of the loop device. You are now probably " +"wondering for which volume you are actually entering " +"the passphrase. Does it relate to your /home? Or to " +"/var? Of course, if you have just one encrypted volume, " +"this is easy and you can just enter the passphrase you used when setting up " +"this volume. If you set up more than one encrypted volume during the " +"installation, the notes you wrote down as the last step in come in handy. If you did not make a note of the " +"mapping between cryptX and " +"the mount points before, you can still find it in /etc/crypttab and /etc/fstab of your new system." msgstr "" #. Tag: para #: boot-new.xml:227 #, no-c-format -msgid "The prompt may look somewhat different when an encrypted root file system is mounted. This depends on which initramfs generator was used to generate the initrd used to boot the system. The example below is for an initrd generated using initramfs-tools:" +msgid "" +"The prompt may look somewhat different when an encrypted root file system is " +"mounted. This depends on which initramfs generator was used to generate the " +"initrd used to boot the system. The example below is for an initrd generated " +"using initramfs-tools:" msgstr "" #. Tag: screen @@ -206,15 +320,18 @@ msgid "" msgstr "" #. Tag: para -#: boot-new.xml:236 -#: boot-new.xml:261 +#: boot-new.xml:236 boot-new.xml:261 #, no-c-format -msgid "No characters (even asterisks) will be shown while entering the passphrase. If you enter the wrong passphrase, you have two more tries to correct it. After the third try the boot process will skip this volume and continue to mount the next filesystem. Please see for further information." +msgid "" +"No characters (even asterisks) will be shown while entering the passphrase. " +"If you enter the wrong passphrase, you have two more tries to correct it. " +"After the third try the boot process will skip this volume and continue to " +"mount the next filesystem. Please see for further information." msgstr "" #. Tag: para -#: boot-new.xml:244 -#: boot-new.xml:269 +#: boot-new.xml:244 boot-new.xml:269 #, no-c-format msgid "After entering all passphrases the boot should continue as usual." msgstr "" @@ -228,7 +345,9 @@ msgstr "" #. Tag: para #: boot-new.xml:254 #, no-c-format -msgid "For partitions encrypted using loop-AES you will be shown the following prompt during the boot:" +msgid "" +"For partitions encrypted using loop-AES you will be shown the following " +"prompt during the boot:" msgstr "" #. Tag: screen @@ -236,7 +355,8 @@ msgstr "" #, no-c-format msgid "" "Checking loop-encrypted file systems.\n" -"Setting up /dev/loopX (/mountpoint)\n" +"Setting up /dev/loopX (/mountpoint)\n" "Password:" msgstr "" @@ -249,47 +369,77 @@ msgstr "" #. Tag: para #: boot-new.xml:279 #, no-c-format -msgid "If some of the encrypted volumes could not be mounted because a wrong passphrase was entered, you will have to mount them manually after the boot. There are several cases." +msgid "" +"If some of the encrypted volumes could not be mounted because a wrong " +"passphrase was entered, you will have to mount them manually after the boot. " +"There are several cases." msgstr "" #. Tag: para #: boot-new.xml:288 #, no-c-format -msgid "The first case concerns the root partition. When it is not mounted correctly, the boot process will halt and you will have to reboot the computer to try again." +msgid "" +"The first case concerns the root partition. When it is not mounted " +"correctly, the boot process will halt and you will have to reboot the " +"computer to try again." msgstr "" #. Tag: para #: boot-new.xml:295 #, no-c-format msgid "" -"The easiest case is for encrypted volumes holding data like /home or /srv. You can simply mount them manually after the boot. For loop-AES this is one-step operation: \n" -"# mount /mount_point\n" +"The easiest case is for encrypted volumes holding data like /home or /srv. You can simply mount them manually " +"after the boot. For loop-AES this is one-step operation: " +"\n" +"# mount /mount_point\n" "Password:\n" -" where /mount_point should be replaced by the particular directory (e.g. /home). The only difference from an ordinary mount is that you will be asked to enter the passphrase for this volume." +" where /mount_point " +"should be replaced by the particular directory (e.g. /home). The only difference from an ordinary mount is that you will be " +"asked to enter the passphrase for this volume." msgstr "" #. Tag: para #: boot-new.xml:309 #, no-c-format msgid "" -"For dm-crypt this is a bit trickier. First you need to register the volumes with device mapper by running: \n" +"For dm-crypt this is a bit trickier. First you need to register the volumes " +"with device mapper by running: " +"\n" "# /etc/init.d/cryptdisks start\n" -" This will scan all volumes mentioned in /etc/crypttab and will create appropriate devices under the /dev directory after entering the correct passphrases. (Already registered volumes will be skipped, so you can repeat this command several times without worrying.) After successful registration you can simply mount the volumes the usual way:" +" This will scan all volumes mentioned in " +"/etc/crypttab and will create appropriate devices under " +"the /dev directory after entering the correct " +"passphrases. (Already registered volumes will be skipped, so you can repeat " +"this command several times without worrying.) After successful registration " +"you can simply mount the volumes the usual way:" msgstr "" #. Tag: screen #: boot-new.xml:324 #, no-c-format -msgid "# mount /mount_point" +msgid "" +"# mount /mount_point" msgstr "" #. Tag: para #: boot-new.xml:327 #, no-c-format msgid "" -"If any volume holding noncritical system files could not be mounted (/usr or /var), the system should still boot and you should be able to mount the volumes manually like in the previous case. However, you will also need to (re)start any services usually running in your default runlevel because it is very likely that they were not started. The easiest way to achieve this is by switching to the first runlevel and back by entering \n" +"If any volume holding noncritical system files could not be mounted " +"(/usr or /var), the system should " +"still boot and you should be able to mount the volumes manually like in the " +"previous case. However, you will also need to (re)start any services usually " +"running in your default runlevel because it is very likely that they were " +"not started. The easiest way to achieve this is by switching to the first " +"runlevel and back by entering \n" "# init 1\n" -" at the shell prompt and pressing Control D when asked for the root password." +" at the shell prompt and pressing " +"Control D when asked for the " +"root password." msgstr "" #. Tag: title @@ -301,42 +451,73 @@ msgstr "" #. Tag: para #: boot-new.xml:352 #, no-c-format -msgid "Once your system boots, you'll be presented with the login prompt. Log in using the personal login and password you selected during the installation process. Your system is now ready to use." +msgid "" +"Once your system boots, you'll be presented with the login prompt. Log in " +"using the personal login and password you selected during the installation " +"process. Your system is now ready to use." msgstr "" #. Tag: para #: boot-new.xml:358 #, no-c-format -msgid "If you are a new user, you may want to explore the documentation which is already installed on your system as you start to use it. There are currently several documentation systems, work is proceeding on integrating the different types of documentation. Here are a few starting points." +msgid "" +"If you are a new user, you may want to explore the documentation which is " +"already installed on your system as you start to use it. There are currently " +"several documentation systems, work is proceeding on integrating the " +"different types of documentation. Here are a few starting points." msgstr "" #. Tag: para #: boot-new.xml:366 #, no-c-format -msgid "Documentation accompanying programs you have installed is in /usr/share/doc/, under a subdirectory named after the program. For example, the APT User's Guide for using apt to install other programs on your system, is located in /usr/share/doc/apt/guide.html/index.html." +msgid "" +"Documentation accompanying programs you have installed is in /usr/" +"share/doc/, under a subdirectory named after the program. For " +"example, the APT User's Guide for using apt to install " +"other programs on your system, is located in /usr/share/doc/apt/" +"guide.html/index.html." msgstr "" #. Tag: para #: boot-new.xml:375 #, no-c-format -msgid "In addition, there are some special folders within the /usr/share/doc/ hierarchy. Linux HOWTOs are installed in .gz format, in /usr/share/doc/HOWTO/en-txt/. After installing dhelp you will find a browse-able index of documentation in /usr/share/doc/HTML/index.html." +msgid "" +"In addition, there are some special folders within the /usr/share/" +"doc/ hierarchy. Linux HOWTOs are installed in .gz format, in /usr/share/doc/HOWTO/en-txt/. " +"After installing dhelp you will find a browse-able index " +"of documentation in /usr/share/doc/HTML/index.html." msgstr "" #. Tag: para #: boot-new.xml:385 #, no-c-format -msgid "One easy way to view these documents is to cd /usr/share/doc/, and type lynx followed by a space and a dot (the dot stands for the current directory)." +msgid "" +"One easy way to view these documents is to cd /usr/share/doc/, and type lynx followed by a space and a " +"dot (the dot stands for the current directory)." msgstr "" #. Tag: para #: boot-new.xml:392 #, no-c-format -msgid "You can also type info command or man command to see documentation on most commands available at the command prompt. Typing help will display help on shell commands. And typing a command followed by --help will usually display a short summary of the command's usage. If a command's results scroll past the top of the screen, type | more after the command to cause the results to pause before scrolling past the top of the screen. To see a list of all commands available which begin with a certain letter, type the letter and then two tabs." +msgid "" +"You can also type info command or man command " +"to see documentation on most commands available at the command prompt. " +"Typing help will display help on shell commands. And " +"typing a command followed by --help will usually " +"display a short summary of the command's usage. If a command's results " +"scroll past the top of the screen, type | more after " +"the command to cause the results to pause before scrolling past the top of " +"the screen. To see a list of all commands available which begin with a " +"certain letter, type the letter and then two tabs." msgstr "" #. Tag: para #: boot-new.xml:407 #, no-c-format -msgid "For a more complete introduction to Debian and GNU/Linux, see /usr/share/doc/debian-guide/html/noframes/index.html." +msgid "" +"For a more complete introduction to Debian and GNU/Linux, see /usr/" +"share/doc/debian-guide/html/noframes/index.html." msgstr "" - diff --git a/po/hu/hardware.po b/po/hu/hardware.po index 87b5b5170..f477ad3fa 100644 --- a/po/hu/hardware.po +++ b/po/hu/hardware.po @@ -1,12 +1,13 @@ msgid "" msgstr "" "Project-Id-Version: \n" -"POT-Creation-Date: \n" +"Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n" +"POT-Creation-Date: 2006-08-18 17:32+0000\n" "PO-Revision-Date: 2006-08-20 17:27+0100\n" "Last-Translator: SZERVÁC Attila \n" "Language-Team: hu\n" "MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=utf-8\n" +"Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Poedit-Language: Hungarian\n" @@ -21,8 +22,14 @@ msgstr "Rendszerkövetelmények" #. Tag: para #: hardware.xml:7 #, no-c-format -msgid "This section contains information about what hardware you need to get started with Debian. You will also find links to further information about hardware supported by GNU and Linux." -msgstr "E fejezet leírja a Debian használatához szükséges hardvert. A GNU és Linux által támogatott hardverekről szóló további információkra utaló hivatkozásokat is ad." +msgid "" +"This section contains information about what hardware you need to get " +"started with Debian. You will also find links to further information about " +"hardware supported by GNU and Linux." +msgstr "" +"E fejezet leírja a Debian használatához szükséges hardvert. A GNU és Linux " +"által támogatott hardverekről szóló további információkra utaló " +"hivatkozásokat is ad." #. Tag: title #: hardware.xml:20 @@ -33,14 +40,32 @@ msgstr "Támogatott hardver" #. Tag: para #: hardware.xml:21 #, no-c-format -msgid "Debian does not impose hardware requirements beyond the requirements of the Linux kernel and the GNU tool-sets. Therefore, any architecture or platform to which the Linux kernel, libc, gcc, etc. have been ported, and for which a Debian port exists, can run Debian. Please refer to the Ports pages at for more details on &arch-title; architecture systems which have been tested with Debian." -msgstr "A Debian nem igényel a Linux és a GNU eszköz-készletek által kívántnál több hardvert. Ezért minden gépen, melyen a Linux kernel, a libc, a gcc és a többi fut, és melyre a Debian portolva van, futtatható a Debian. Lásd a Debian portok oldalát a címen a jelen &arch-title; architektúra rendszerekről, melyek teszteltek a Debian rendszerrel." +msgid "" +"Debian does not impose hardware requirements beyond the requirements of the " +"Linux kernel and the GNU tool-sets. Therefore, any architecture or platform " +"to which the Linux kernel, libc, gcc, etc. have been " +"ported, and for which a Debian port exists, can run Debian. Please refer to " +"the Ports pages at for more details on " +"&arch-title; architecture systems which have been tested with Debian." +msgstr "" +"A Debian nem igényel a Linux és a GNU eszköz-készletek által kívántnál több " +"hardvert. Ezért minden gépen, melyen a Linux kernel, a libc, a gcc és a többi fut, és melyre a Debian portolva van, futtatható a " +"Debian. Lásd a Debian portok oldalát a " +"címen a jelen &arch-title; architektúra rendszerekről, melyek teszteltek a " +"Debian rendszerrel." #. Tag: para #: hardware.xml:32 #, no-c-format -msgid "Rather than attempting to describe all the different hardware configurations which are supported for &arch-title;, this section contains general information and pointers to where additional information can be found." -msgstr "A jelen, &arch-title; architektúra által támogatott összes különböző hardver konfiguráció leírásának megkísérlése helyett, e fejezet általános adatokat és hivatkozásokat ad bővebb adatok helyéről." +msgid "" +"Rather than attempting to describe all the different hardware configurations " +"which are supported for &arch-title;, this section contains general " +"information and pointers to where additional information can be found." +msgstr "" +"A jelen, &arch-title; architektúra által támogatott összes különböző hardver " +"konfiguráció leírásának megkísérlése helyett, e fejezet általános adatokat " +"és hivatkozásokat ad bővebb adatok helyéről." #. Tag: title #: hardware.xml:41 @@ -51,7 +76,9 @@ msgstr "Támogatott architektúrák" #. Tag: para #: hardware.xml:42 #, no-c-format -msgid "Debian &release; supports eleven major architectures and several variations of each architecture known as flavors." +msgid "" +"Debian &release; supports eleven major architectures and several variations " +"of each architecture known as flavors." msgstr "" #. Tag: entry @@ -247,29 +274,25 @@ msgid "r5k-ip32" msgstr "r5k-ip32" #. Tag: entry -#: hardware.xml:119 -#: hardware.xml:137 +#: hardware.xml:119 hardware.xml:137 #, no-c-format msgid "Broadcom BCM91250A (SWARM)" msgstr "Broadcom BCM91250A (SWARM)" #. Tag: entry -#: hardware.xml:120 -#: hardware.xml:138 +#: hardware.xml:120 hardware.xml:138 #, no-c-format msgid "sb1-bcm91250a" msgstr "sb1-bcm91250a" #. Tag: entry -#: hardware.xml:122 -#: hardware.xml:140 +#: hardware.xml:122 hardware.xml:140 #, no-c-format msgid "Broadcom BCM91480B (BigSur)" msgstr "Broadcom BCM91480B (BigSur)" #. Tag: entry -#: hardware.xml:123 -#: hardware.xml:141 +#: hardware.xml:123 hardware.xml:141 #, no-c-format msgid "sb1a-bcm91480b" msgstr "sb1a-bcm91480b" @@ -305,19 +328,13 @@ msgid "DECstation" msgstr "DECstation" #. Tag: entry -#: hardware.xml:133 -#: hardware.xml:1087 -#: hardware.xml:1102 -#: hardware.xml:1112 +#: hardware.xml:133 hardware.xml:1087 hardware.xml:1102 hardware.xml:1112 #, no-c-format msgid "r4k-kn04" msgstr "r4k-kn04" #. Tag: entry -#: hardware.xml:135 -#: hardware.xml:1082 -#: hardware.xml:1092 -#: hardware.xml:1097 +#: hardware.xml:135 hardware.xml:1082 hardware.xml:1092 hardware.xml:1097 #: hardware.xml:1107 #, no-c-format msgid "r3k-kn02" @@ -518,26 +535,42 @@ msgstr "szalag" #. Tag: para #: hardware.xml:201 #, no-c-format -msgid "This document covers installation for the &arch-title; architecture. If you are looking for information on any of the other Debian-supported architectures take a look at the Debian-Ports pages." -msgstr "E dokumentum leírja a Debian &arch-title; architektúrára telepítését. Ha más, Debian által támogatott architektúra érdekel, nézd meg a Debian portok oldalt." +msgid "" +"This document covers installation for the &arch-title; " +"architecture. If you are looking for information on any of the other Debian-" +"supported architectures take a look at the Debian-Ports pages." +msgstr "" +"E dokumentum leírja a Debian &arch-title; " +"architektúrára telepítését. Ha más, Debian által támogatott architektúra " +"érdekel, nézd meg a Debian " +"portok oldalt." #. Tag: para #: hardware.xml:209 #, no-c-format -msgid "This is the first official release of &debian; for the &arch-title; architecture. We feel that it has proven itself sufficiently to be released. However, because it has not had the exposure (and hence testing by users) that some other architectures have had, you may encounter a few bugs. Use our Bug Tracking System to report any problems; make sure to mention the fact that the bug is on the &arch-title; platform. It can be necessary to use the debian-&arch-listname; mailing list as well." -msgstr "Az a &debian; 1. hivatalos &arch-title; kiadása. Tapasztalataink szerint megérett a kiadásra. De mivel még kevesebb felhasználó tesztelte, ezért nagyobb az esély, hogy találsz benne hibát. Kérjük, a Hibakövető rendszer segítségével jelents minden hibát; említsd meg, hogy a hibát &arch-title; platformon lelted. Ilyenkor az architektúrának megfelelő debian-&arch-listname; lista használata is szükséges lehet." +msgid "" +"This is the first official release of &debian; for the &arch-title; " +"architecture. We feel that it has proven itself sufficiently to be released. " +"However, because it has not had the exposure (and hence testing by users) " +"that some other architectures have had, you may encounter a few bugs. Use " +"our Bug Tracking System to report any " +"problems; make sure to mention the fact that the bug is on the &arch-title; " +"platform. It can be necessary to use the debian-&arch-listname; mailing list as well." +msgstr "" +"Az a &debian; 1. hivatalos &arch-title; kiadása. Tapasztalataink szerint " +"megérett a kiadásra. De mivel még kevesebb felhasználó tesztelte, ezért " +"nagyobb az esély, hogy találsz benne hibát. Kérjük, a Hibakövető rendszer segítségével jelents minden hibát; említsd " +"meg, hogy a hibát &arch-title; platformon lelted. Ilyenkor az " +"architektúrának megfelelő debian-&arch-" +"listname; lista használata is szükséges lehet." #. Tag: title -#: hardware.xml:231 -#: hardware.xml:690 -#: hardware.xml:726 -#: hardware.xml:802 -#: hardware.xml:821 -#: hardware.xml:907 -#: hardware.xml:949 -#: hardware.xml:1017 -#: hardware.xml:1176 -#: hardware.xml:1622 +#: hardware.xml:231 hardware.xml:690 hardware.xml:726 hardware.xml:802 +#: hardware.xml:821 hardware.xml:907 hardware.xml:949 hardware.xml:1017 +#: hardware.xml:1176 hardware.xml:1622 #, no-c-format msgid "CPU, Main Boards, and Video Support" msgstr "CPU, alaplap és videó támogatás" @@ -545,20 +578,42 @@ msgstr "CPU, alaplap és videó támogatás" #. Tag: para #: hardware.xml:232 #, no-c-format -msgid "Complete information regarding supported DEC Alphas can be found at Linux Alpha HOWTO. The purpose of this section is to describe the systems supported by the boot disks." -msgstr "A támogatott DEC Alpha gépekkel kapcsolatos adatok a Linux Alpha HOGYAN címen találhatók. E szakasz célja az indító lemezek által támogatott rendszerek leírása." +msgid "" +"Complete information regarding supported DEC Alphas can be found at Linux Alpha HOWTO. The purpose of this " +"section is to describe the systems supported by the boot disks." +msgstr "" +"A támogatott DEC Alpha gépekkel kapcsolatos adatok a Linux Alpha HOGYAN címen találhatók. E szakasz célja az " +"indító lemezek által támogatott rendszerek leírása." #. Tag: para #: hardware.xml:239 #, no-c-format -msgid "Alpha machines are subdivided into different system types because there are a number of generations of motherboard and supporting chipsets. Different systems (sub-architectures) often have radically different engineering and capabilities. Therefore, the process of installing and, more to the point, booting, can vary from system to system." -msgstr "Az Alpha gépek 2 eltérő rendszer-típusra oszlanak, mert számos generációt éltek meg. Ezek az alrendszerek (al-architektúrák) teljesen eltérő felépítéssel és képességekkel rendelkeznek. Ezért a telepítés, és főleg az indítás rendszerről rendszerre eltér." +msgid "" +"Alpha machines are subdivided into different system types because there are " +"a number of generations of motherboard and supporting chipsets. Different " +"systems (sub-architectures) often have radically different " +"engineering and capabilities. Therefore, the process of installing and, more " +"to the point, booting, can vary from system to system." +msgstr "" +"Az Alpha gépek 2 eltérő rendszer-típusra oszlanak, mert számos generációt " +"éltek meg. Ezek az alrendszerek (al-architektúrák) teljesen " +"eltérő felépítéssel és képességekkel rendelkeznek. Ezért a telepítés, és " +"főleg az indítás rendszerről rendszerre eltér." #. Tag: para #: hardware.xml:247 #, no-c-format -msgid "The following table lists the system types supported by the Debian installation system. The table also indicates the code name for these system types. You'll need to know this code name when you actually begin the installation process:" -msgstr "Az alábbi táblázat adja a Debian telepítő rendszer által támogatott rendszereket. A táblázat e rendszerek kódnevét is mutatja. A telepítés megkezdéséhez tudnod kell majd ezt:" +msgid "" +"The following table lists the system types supported by the Debian " +"installation system. The table also indicates the code name for these system types. You'll need to know this code name when " +"you actually begin the installation process:" +msgstr "" +"Az alábbi táblázat adja a Debian telepítő rendszer által támogatott " +"rendszereket. A táblázat e rendszerek kódnevét is " +"mutatja. A telepítés megkezdéséhez tudnod kell majd ezt:" #. Tag: entry #: hardware.xml:264 @@ -597,9 +652,7 @@ msgid "Maverick" msgstr "Maverick" #. Tag: entry -#: hardware.xml:274 -#: hardware.xml:278 -#: hardware.xml:282 +#: hardware.xml:274 hardware.xml:278 hardware.xml:282 #, no-c-format msgid "alcor" msgstr "alcor" @@ -689,14 +742,8 @@ msgid "Mustang" msgstr "Mustang" #. Tag: entry -#: hardware.xml:300 -#: hardware.xml:304 -#: hardware.xml:308 -#: hardware.xml:312 -#: hardware.xml:316 -#: hardware.xml:320 -#: hardware.xml:324 -#: hardware.xml:328 +#: hardware.xml:300 hardware.xml:304 hardware.xml:308 hardware.xml:312 +#: hardware.xml:316 hardware.xml:320 hardware.xml:324 hardware.xml:328 #, no-c-format msgid "avanti" msgstr "avanti" @@ -786,9 +833,7 @@ msgid "Avanti" msgstr "Avanti" #. Tag: entry -#: hardware.xml:332 -#: hardware.xml:345 -#: hardware.xml:346 +#: hardware.xml:332 hardware.xml:345 hardware.xml:346 #, no-c-format msgid "EB164" msgstr "EB164" @@ -854,9 +899,7 @@ msgid "eb164" msgstr "eb164" #. Tag: entry -#: hardware.xml:351 -#: hardware.xml:360 -#: hardware.xml:361 +#: hardware.xml:351 hardware.xml:360 hardware.xml:361 #, no-c-format msgid "EB64+" msgstr "EB64+" @@ -868,15 +911,13 @@ msgid "AlphaPC64" msgstr "AlphaPC64" #. Tag: entry -#: hardware.xml:353 -#: hardware.xml:357 +#: hardware.xml:353 hardware.xml:357 #, no-c-format msgid "Cabriolet" msgstr "Cabriolet" #. Tag: entry -#: hardware.xml:354 -#: hardware.xml:358 +#: hardware.xml:354 hardware.xml:358 #, no-c-format msgid "cabriolet" msgstr "cabriolet" @@ -894,9 +935,7 @@ msgid "eb64p" msgstr "eb64p" #. Tag: entry -#: hardware.xml:366 -#: hardware.xml:367 -#: hardware.xml:368 +#: hardware.xml:366 hardware.xml:367 hardware.xml:368 #, no-c-format msgid "EB66" msgstr "EB66" @@ -908,8 +947,7 @@ msgid "eb66" msgstr "eb66" #. Tag: entry -#: hardware.xml:371 -#: hardware.xml:372 +#: hardware.xml:371 hardware.xml:372 #, no-c-format msgid "EB66+" msgstr "EB66+" @@ -933,53 +971,22 @@ msgid "DEC 2000 Model 300(S)" msgstr "DEC 2000 Model 300(S)" #. Tag: entry -#: hardware.xml:379 -#: hardware.xml:387 +#: hardware.xml:379 hardware.xml:387 #, no-c-format msgid "Jensen" msgstr "Jensen" #. Tag: entry -#: hardware.xml:380 -#: hardware.xml:384 -#: hardware.xml:388 -#: hardware.xml:449 -#: hardware.xml:453 -#: hardware.xml:471 -#: hardware.xml:475 -#: hardware.xml:479 -#: hardware.xml:483 -#: hardware.xml:487 -#: hardware.xml:491 -#: hardware.xml:495 -#: hardware.xml:509 -#: hardware.xml:513 -#: hardware.xml:517 -#: hardware.xml:521 -#: hardware.xml:525 -#: hardware.xml:559 -#: hardware.xml:563 -#: hardware.xml:567 -#: hardware.xml:571 -#: hardware.xml:585 -#: hardware.xml:589 -#: hardware.xml:593 -#: hardware.xml:597 -#: hardware.xml:604 -#: hardware.xml:608 -#: hardware.xml:612 -#: hardware.xml:616 -#: hardware.xml:620 -#: hardware.xml:624 -#: hardware.xml:628 -#: hardware.xml:632 -#: hardware.xml:636 -#: hardware.xml:640 -#: hardware.xml:644 -#: hardware.xml:648 -#: hardware.xml:652 -#: hardware.xml:659 -#: hardware.xml:663 +#: hardware.xml:380 hardware.xml:384 hardware.xml:388 hardware.xml:449 +#: hardware.xml:453 hardware.xml:471 hardware.xml:475 hardware.xml:479 +#: hardware.xml:483 hardware.xml:487 hardware.xml:491 hardware.xml:495 +#: hardware.xml:509 hardware.xml:513 hardware.xml:517 hardware.xml:521 +#: hardware.xml:525 hardware.xml:559 hardware.xml:563 hardware.xml:567 +#: hardware.xml:571 hardware.xml:585 hardware.xml:589 hardware.xml:593 +#: hardware.xml:597 hardware.xml:604 hardware.xml:608 hardware.xml:612 +#: hardware.xml:616 hardware.xml:620 hardware.xml:624 hardware.xml:628 +#: hardware.xml:632 hardware.xml:636 hardware.xml:640 hardware.xml:644 +#: hardware.xml:648 hardware.xml:652 hardware.xml:659 hardware.xml:663 #, no-c-format msgid "N/A" msgstr "N/A" @@ -1015,27 +1022,15 @@ msgid "Personal WorkStation 433a" msgstr "Personal WorkStation 433a" #. Tag: entry -#: hardware.xml:394 -#: hardware.xml:398 -#: hardware.xml:402 -#: hardware.xml:406 -#: hardware.xml:410 -#: hardware.xml:414 -#: hardware.xml:418 -#: hardware.xml:422 +#: hardware.xml:394 hardware.xml:398 hardware.xml:402 hardware.xml:406 +#: hardware.xml:410 hardware.xml:414 hardware.xml:418 hardware.xml:422 #, no-c-format msgid "Miata" msgstr "Miata" #. Tag: entry -#: hardware.xml:395 -#: hardware.xml:399 -#: hardware.xml:403 -#: hardware.xml:407 -#: hardware.xml:411 -#: hardware.xml:415 -#: hardware.xml:419 -#: hardware.xml:423 +#: hardware.xml:395 hardware.xml:399 hardware.xml:403 hardware.xml:407 +#: hardware.xml:411 hardware.xml:415 hardware.xml:419 hardware.xml:423 #, no-c-format msgid "miata" msgstr "miata" @@ -1101,10 +1096,7 @@ msgid "Mikasa" msgstr "Mikasa" #. Tag: entry -#: hardware.xml:430 -#: hardware.xml:434 -#: hardware.xml:438 -#: hardware.xml:442 +#: hardware.xml:430 hardware.xml:434 hardware.xml:438 hardware.xml:442 #, no-c-format msgid "mikasa" msgstr "mikasa" @@ -1122,8 +1114,7 @@ msgid "Mikasa+" msgstr "Mikasa+" #. Tag: entry -#: hardware.xml:436 -#: hardware.xml:440 +#: hardware.xml:436 hardware.xml:440 #, no-c-format msgid "AlphaServer 1000 5/300" msgstr "AlphaServer 1000 5/300" @@ -1189,8 +1180,7 @@ msgid "Noname" msgstr "Névtelen" #. Tag: entry -#: hardware.xml:460 -#: hardware.xml:464 +#: hardware.xml:460 hardware.xml:464 #, no-c-format msgid "noname" msgstr "névtelen" @@ -1256,9 +1246,7 @@ msgid "AlphaServer 800 5/333...500" msgstr "AlphaServer 800 5/333...500" #. Tag: entry -#: hardware.xml:482 -#: hardware.xml:490 -#: hardware.xml:494 +#: hardware.xml:482 hardware.xml:490 hardware.xml:494 #, no-c-format msgid "Corelle" msgstr "Corelle" @@ -1294,8 +1282,7 @@ msgid "PLATFORM 2000" msgstr "PLATFORM 2000" #. Tag: entry -#: hardware.xml:500 -#: hardware.xml:501 +#: hardware.xml:500 hardware.xml:501 #, no-c-format msgid "P2K" msgstr "P2K" @@ -1319,8 +1306,7 @@ msgid "AlphaServer 1200 5/xxx" msgstr "AlphaServer 1200 5/xxx" #. Tag: entry -#: hardware.xml:508 -#: hardware.xml:520 +#: hardware.xml:508 hardware.xml:520 #, no-c-format msgid "Tincup/DaVinci" msgstr "Tincup/DaVinci" @@ -1344,8 +1330,7 @@ msgid "AlphaServer 4100 5/xxx" msgstr "AlphaServer 4100 5/xxx" #. Tag: entry -#: hardware.xml:516 -#: hardware.xml:524 +#: hardware.xml:516 hardware.xml:524 #, no-c-format msgid "Dodge" msgstr "Dodge" @@ -1375,23 +1360,15 @@ msgid "DeskStation AlphaPC164-UX" msgstr "DeskStation AlphaPC164-UX" #. Tag: entry -#: hardware.xml:531 -#: hardware.xml:535 -#: hardware.xml:539 -#: hardware.xml:543 -#: hardware.xml:547 -#: hardware.xml:551 +#: hardware.xml:531 hardware.xml:535 hardware.xml:539 hardware.xml:543 +#: hardware.xml:547 hardware.xml:551 #, no-c-format msgid "Ruffian" msgstr "Ruffian" #. Tag: entry -#: hardware.xml:532 -#: hardware.xml:536 -#: hardware.xml:540 -#: hardware.xml:544 -#: hardware.xml:548 -#: hardware.xml:552 +#: hardware.xml:532 hardware.xml:536 hardware.xml:540 hardware.xml:544 +#: hardware.xml:548 hardware.xml:552 #, no-c-format msgid "ruffian" msgstr "ruffian" @@ -1547,9 +1524,7 @@ msgid "Privateer" msgstr "Privateer" #. Tag: entry -#: hardware.xml:595 -#: hardware.xml:634 -#: hardware.xml:638 +#: hardware.xml:595 hardware.xml:634 hardware.xml:638 #, no-c-format msgid "UNKNOWN" msgstr "ISMERETLEN" @@ -1573,8 +1548,7 @@ msgid "AlphaServer DS10" msgstr "AlphaServer DS10" #. Tag: entry -#: hardware.xml:603 -#: hardware.xml:651 +#: hardware.xml:603 hardware.xml:651 #, no-c-format msgid "Webbrick" msgstr "Webbrick" @@ -1640,8 +1614,7 @@ msgid "Clipper" msgstr "Clipper" #. Tag: entry -#: hardware.xml:626 -#: hardware.xml:627 +#: hardware.xml:626 hardware.xml:627 #, no-c-format msgid "DP264" msgstr "DP264" @@ -1713,8 +1686,7 @@ msgid "AlphaServer GS160" msgstr "AlphaServer GS160" #. Tag: entry -#: hardware.xml:658 -#: hardware.xml:662 +#: hardware.xml:658 hardware.xml:662 #, no-c-format msgid "Wildfire" msgstr "Wildfire" @@ -1726,8 +1698,7 @@ msgid "AlphaServer GS320" msgstr "AlphaServer GS320" #. Tag: entry -#: hardware.xml:667 -#: hardware.xml:669 +#: hardware.xml:667 hardware.xml:669 #, no-c-format msgid "XL" msgstr "XL" @@ -1747,20 +1718,27 @@ msgstr "xl" #. Tag: para #: hardware.xml:675 #, no-c-format -msgid "It is believed that Debian &releasename; supports installing on all alpha sub-architectures with the exception of the ARC-only Ruffian and XL sub-architectures and the Titan subarchitecture, which requires a change to the kernel compile options." +msgid "" +"It is believed that Debian &releasename; supports installing on all alpha " +"sub-architectures with the exception of the ARC-only Ruffian and XL sub-" +"architectures and the Titan subarchitecture, which requires a change to the " +"kernel compile options." msgstr "" #. Tag: para -#: hardware.xml:691 -#: hardware.xml:822 +#: hardware.xml:691 hardware.xml:822 #, no-c-format -msgid "Complete information concerning supported peripherals can be found at Linux Hardware Compatibility HOWTO. This section merely outlines the basics." -msgstr "A Linux Hardver Kompatibilitás HOGYAN leírásban megtalálható a támogatott perifériák listája. Ez a fejezet csak az alapokat emel ki." +msgid "" +"Complete information concerning supported peripherals can be found at Linux Hardware Compatibility HOWTO. " +"This section merely outlines the basics." +msgstr "" +"A Linux Hardver Kompatibilitás HOGYAN leírásban megtalálható a támogatott perifériák listája. Ez a fejezet " +"csak az alapokat emel ki." #. Tag: title -#: hardware.xml:699 -#: hardware.xml:830 -#: hardware.xml:990 +#: hardware.xml:699 hardware.xml:830 hardware.xml:990 #, no-c-format msgid "CPU" msgstr "CPU" @@ -1774,13 +1752,20 @@ msgstr "Az AMD64 és Intel EM64t processzorok is támogatottak." #. Tag: para #: hardware.xml:728 #, no-c-format -msgid "Each distinct ARM architecture requires its own kernel. Because of this the standard Debian distribution only supports installation on a number of the most common systems. The Debian userland however may be used by any ARM CPU including xscale." +msgid "" +"Each distinct ARM architecture requires its own kernel. Because of this the " +"standard Debian distribution only supports installation on a number of the " +"most common systems. The Debian userland however may be used by " +"any ARM CPU including xscale." msgstr "" #. Tag: para #: hardware.xml:736 #, no-c-format -msgid "Most ARM CPUs may be run in either endian mode (big or little). However, the majority of current system implementation uses little-endian mode. Debian currently only supports little-endian ARM systems." +msgid "" +"Most ARM CPUs may be run in either endian mode (big or little). However, the " +"majority of current system implementation uses little-endian mode. Debian " +"currently only supports little-endian ARM systems." msgstr "" #. Tag: para @@ -1798,8 +1783,17 @@ msgstr "Netwinder" #. Tag: para #: hardware.xml:752 #, no-c-format -msgid "This is actually the name for the group of machines based upon the StrongARM 110 CPU and Intel 21285 Northbridge (also known as Footbridge). It comprises of machines like: Netwinder (possibly one of the most common ARM boxes), CATS (also known as the EB110ATX), EBSA 285 and Compaq personal server (cps, aka skiff)." -msgstr "Ez a StrongARM 110 CPU és az Intel 21285 Northbridge (vagy Footbridge) hardverekre épülő gépek neve. Többek között: Netwinder (az egyik legelterjedtebb ARM gép), CATS (vagy EB110ATX), EBSA 285 és Compaq personal server (cps más néven skiff)." +msgid "" +"This is actually the name for the group of machines based upon the StrongARM " +"110 CPU and Intel 21285 Northbridge (also known as Footbridge). It comprises " +"of machines like: Netwinder (possibly one of the most common ARM boxes), " +"CATS (also known as the EB110ATX), EBSA 285 and Compaq personal server (cps, " +"aka skiff)." +msgstr "" +"Ez a StrongARM 110 CPU és az Intel 21285 Northbridge (vagy Footbridge) " +"hardverekre épülő gépek neve. Többek között: Netwinder (az egyik " +"legelterjedtebb ARM gép), CATS (vagy EB110ATX), EBSA 285 és Compaq personal " +"server (cps más néven skiff)." #. Tag: term #: hardware.xml:765 @@ -1810,7 +1804,11 @@ msgstr "NSLU2" #. Tag: para #: hardware.xml:766 #, no-c-format -msgid "The Linksys NSLU2 (Network Storage Link for USB 2.0 Disk Drives) is a small device which allows you to easily provide storage via the network. It comes with an Ethernet connection and two USB ports to which hard drives can be connected." +msgid "" +"The Linksys NSLU2 (Network Storage Link for USB 2.0 Disk Drives) is a small " +"device which allows you to easily provide storage via the network. It comes " +"with an Ethernet connection and two USB ports to which hard drives can be " +"connected." msgstr "" #. Tag: term @@ -1822,32 +1820,100 @@ msgstr "RiscPC" #. Tag: para #: hardware.xml:778 #, no-c-format -msgid "This machine is the oldest supported hardware: it was released in 1994. It has RISC OS in ROM, Linux can be booted from that OS using linloader. The RiscPC has a modular CPU card and typically has a 30MHz 610, 40MHz 710 or 233MHz Strongarm 110 CPU fitted. The mainboard has integrated IDE, SVGA video, parallel port, single serial port, PS/2 keyboard and proprietary mouse port. The proprietary module expansion bus allows for up to eight expansion cards to be fitted depending on configuration, several of these modules have Linux drivers." -msgstr "Ez a gép a legrégebben támogatott hardver: a megjelenés éve: 1994. A ROM tartalma egy RISC OS, a Linux ebből indítható a linloader programmal. A RiscPC lelke egy moduláris CPU kártya, melyen jellemzően egy 30MHz 610, 40MHz 710 vagy 233MHz Strongarm 110 CPU van. Az alaplapon IDE, SVGA, párhuzamos és 1 soros port, PS/2 billentyű és egy egyéni egér port. Az egyéni modul bővítő busz a kiépítéstől függően legfeljebb 8 különféle bővítő kártyát tesz lehetővé, egyesek mennek Linuxszal." +msgid "" +"This machine is the oldest supported hardware: it was released in 1994. It " +"has RISC OS in ROM, Linux can be booted from that OS using linloader. The " +"RiscPC has a modular CPU card and typically has a 30MHz 610, 40MHz 710 or " +"233MHz Strongarm 110 CPU fitted. The mainboard has integrated IDE, SVGA " +"video, parallel port, single serial port, PS/2 keyboard and proprietary " +"mouse port. The proprietary module expansion bus allows for up to eight " +"expansion cards to be fitted depending on configuration, several of these " +"modules have Linux drivers." +msgstr "" +"Ez a gép a legrégebben támogatott hardver: a megjelenés éve: 1994. A ROM " +"tartalma egy RISC OS, a Linux ebből indítható a linloader programmal. A " +"RiscPC lelke egy moduláris CPU kártya, melyen jellemzően egy 30MHz 610, " +"40MHz 710 vagy 233MHz Strongarm 110 CPU van. Az alaplapon IDE, SVGA, " +"párhuzamos és 1 soros port, PS/2 billentyű és egy egyéni egér port. Az " +"egyéni modul bővítő busz a kiépítéstől függően legfeljebb 8 különféle bővítő " +"kártyát tesz lehetővé, egyesek mennek Linuxszal." #. Tag: para #: hardware.xml:803 #, no-c-format -msgid "The are two major support &architecture; flavors: PA-RISC 1.1 and PA-RISC 2.0. The PA-RISC 1.1 architecture is targeted at 32-bit processors whereas the 2.0 architecture is targeted to the 64-bit processors. Some systems are able to run either kernel. In both cases, the userland is 32-bit. There is the possibility of a 64-bit userland in the future." +msgid "" +"The are two major support &architecture; flavors: PA-" +"RISC 1.1 and PA-RISC 2.0. The PA-RISC 1.1 architecture is targeted at 32-bit " +"processors whereas the 2.0 architecture is targeted to the 64-bit " +"processors. Some systems are able to run either kernel. In both cases, the " +"userland is 32-bit. There is the possibility of a 64-bit userland in the " +"future." msgstr "" #. Tag: para #: hardware.xml:831 #, no-c-format -msgid "Nearly all x86-based (IA-32) processors still in use in personal computers are supported, including all varieties of Intel's \"Pentium\" series. This also includes 32-bits AMD and VIA (former Cyrix) processors, and new processors like the Athlon XP and Intel P4 Xeon." -msgstr "Szinte minden, sok személyi számítógépben még ma is használt x86-alapú (IA-32) processzor támogatott, ideértve az Intel néhai \"Pentium\" sorozatát is. Ez a legrégebbi 32-bites AMD és VIA (egykor Cyrix) processzorokat is jelenti és a a kevésbé régi Athlon XP és Intel P4 Xeonokat." +msgid "" +"Nearly all x86-based (IA-32) processors still in use in personal computers " +"are supported, including all varieties of Intel's \"Pentium\" series. This " +"also includes 32-bits AMD and VIA (former Cyrix) processors, and new " +"processors like the Athlon XP and Intel P4 Xeon." +msgstr "" +"Szinte minden, sok személyi számítógépben még ma is használt x86-alapú (IA-" +"32) processzor támogatott, ideértve az Intel néhai \"Pentium\" sorozatát is. " +"Ez a legrégebbi 32-bites AMD és VIA (egykor Cyrix) processzorokat is jelenti " +"és a a kevésbé régi Athlon XP és Intel P4 Xeonokat." #. Tag: para #: hardware.xml:839 #, no-c-format -msgid "If your system has a 64-bits AMD64, Intel EM64t or Intel Core 2 Duo processor, you will probably want to use the installer for the amd64 architecture instead of the installer for the (32-bits) i386 architecture." -msgstr "Ha a rendszeredben egy 64-bites AMD64, Intel EM64t vagy Intel Core 2 Duo processzor van, akkor valószínűleg már az amd64 architektúrát akarod használni a (32-bites) i386 architektúra telepítője helyett." +msgid "" +"If your system has a 64-bits AMD64, Intel EM64t or Intel Core 2 Duo " +"processor, you will probably want to use the installer for the amd64 " +"architecture instead of the installer for the (32-bits) i386 architecture." +msgstr "" +"Ha a rendszeredben egy 64-bites AMD64, Intel EM64t vagy Intel Core 2 Duo " +"processzor van, akkor valószínűleg már az amd64 architektúrát akarod " +"használni a (32-bites) i386 architektúra telepítője helyett." #. Tag: para #: hardware.xml:846 #, no-c-format -msgid "However, Debian GNU/Linux &releasename; will not run on 386 or earlier processors. Despite the architecture name \"i386\", Debian Sarge has dropped support for actual 80386 processors (and their clones), which were supported by earlier releases We have long tried to avoid this, but in the end it was necessary due a unfortunate series of issues with the compiler and the kernel, starting with an bug in the C++ ABI provided by GCC. You should still be able to run Debian GNU/Linux on actual 80386 processors if you compile your own kernel and compile all packages from source, but that is beyond the scope of this manual. . (No version of Linux has ever supported the 286 or earlier chips in the series.) All i486 and later processors are still supported Many Debian packages will actually run slightly faster on modern computers as a positive side effect of dropping support for these old chips. The i486, introduced in 1989, has three opcodes (bswap, cmpxchg, and xadd) which the i386, introduced in 1986, did not have. Previously, these could not be easily used by most Debian packages; now they can. ." -msgstr "Tudni kell, hogy a Debian GNU/Linux &releasename; immár nem fut 386-os vagy korábbi processzoron. Az \"i386\" architektúra-név ellenére a Debian Sarge óta megszűnt a támogatás a 80386 processzorokhoz (és másolataikhoz), melyet a korábbi kiadások támogattak Sokáig megpróbáltuk elkerülni ezt, de végül a fordító és a kernel hibáinak egy szerencsétlen sora miatt, amely egy a GCC által szállított C++ ABI hibával kezdődött ez szükséges volt. A Debian GNU/Linux még mindig futtatható 80386-os processzoron, de ehhez megadnak kell lefordítanod a kernelt és az összes használt csomagot, és ez túlmutat e kézikönyv célján. . (A Linux nem támogatja a 286-os vagy korábbi x86 processzorokat.) Minden i486 és későbbi processzor támogatott Sok Debian érezhetően gyorsabban fut modern gépeken, ami a régi gépek támogatása elvetésének pozitív oldala. Az i486 (1989) 3 utasításkóddal bír (bswap, cmpxchg, és xadd) mellyel az i386, (1986) nem. Korábban a legtöbb Debian csomagban ezek nemigen voltak használhatók; most igen. ." +msgid "" +"However, Debian GNU/Linux &releasename; will not run on " +"386 or earlier processors. Despite the architecture name \"i386\", Debian " +"Sarge has dropped support for actual 80386 processors " +"(and their clones), which were supported by earlier releases " +" We have long tried to avoid this, but in the end it was necessary due " +"a unfortunate series of issues with the compiler and the kernel, starting " +"with an bug in the C++ ABI provided by GCC. You should still be able to run " +"Debian GNU/Linux on actual 80386 processors if you compile your own kernel " +"and compile all packages from source, but that is beyond the scope of this " +"manual. . (No version of Linux has ever supported the 286 " +"or earlier chips in the series.) All i486 and later processors are still " +"supported Many Debian packages will actually run slightly " +"faster on modern computers as a positive side effect of dropping support for " +"these old chips. The i486, introduced in 1989, has three opcodes (bswap, " +"cmpxchg, and xadd) which the i386, introduced in 1986, did not have. " +"Previously, these could not be easily used by most Debian packages; now they " +"can. ." +msgstr "" +"Tudni kell, hogy a Debian GNU/Linux &releasename; immár nem fut 386-os vagy korábbi processzoron. Az \"i386\" architektúra-név " +"ellenére a Debian Sarge óta megszűnt a támogatás a " +"80386 processzorokhoz (és másolataikhoz), melyet a korábbi kiadások " +"támogattak Sokáig megpróbáltuk elkerülni ezt, de végül a " +"fordító és a kernel hibáinak egy szerencsétlen sora miatt, amely egy a GCC " +"által szállított C++ ABI hibával kezdődött ez szükséges volt. A Debian GNU/" +"Linux még mindig futtatható 80386-os processzoron, de ehhez megadnak kell " +"lefordítanod a kernelt és az összes használt csomagot, és ez túlmutat e " +"kézikönyv célján. . (A Linux nem támogatja a 286-os vagy " +"korábbi x86 processzorokat.) Minden i486 és későbbi processzor " +"támogatott Sok Debian érezhetően gyorsabban fut modern " +"gépeken, ami a régi gépek támogatása elvetésének pozitív oldala. Az i486 " +"(1989) 3 utasításkóddal bír (bswap, cmpxchg, és xadd) mellyel az i386, " +"(1986) nem. Korábban a legtöbb Debian csomagban ezek nemigen voltak " +"használhatók; most igen. ." #. Tag: title #: hardware.xml:883 @@ -1858,49 +1924,114 @@ msgstr "" #. Tag: para #: hardware.xml:884 #, no-c-format -msgid "The system bus is the part of the motherboard which allows the CPU to communicate with peripherals such as storage devices. Your computer must use the ISA, EISA, PCI, the Microchannel Architecture (MCA, used in IBM's PS/2 line), or VESA Local Bus (VLB, sometimes called the VL bus). Essentially all personal computers sold in recent years use one of these." +msgid "" +"The system bus is the part of the motherboard which allows the CPU to " +"communicate with peripherals such as storage devices. Your computer must use " +"the ISA, EISA, PCI, the Microchannel Architecture (MCA, used in IBM's PS/2 " +"line), or VESA Local Bus (VLB, sometimes called the VL bus). Essentially all " +"personal computers sold in recent years use one of these." msgstr "" #. Tag: para #: hardware.xml:908 #, no-c-format -msgid "Complete information concerning supported M68000 based (&architecture;) systems can be found at the Linux/m68k FAQ. This section merely outlines the basics." +msgid "" +"Complete information concerning supported M68000 based " +"(&architecture;) systems can be found at the Linux/m68k FAQ. This section merely outlines the " +"basics." msgstr "" #. Tag: para #: hardware.xml:915 #, no-c-format -msgid "The &architecture; port of Linux runs on any 680x0 with a PMMU (Paged Memory Management Unit) and a FPU (floating-point unit). This includes the 68020 with an external 68851 PMMU, the 68030, and better, and excludes the EC line of 680x0 processors. See the Linux/m68k FAQ for complete details." +msgid "" +"The &architecture; port of Linux runs on any 680x0 with a PMMU (Paged Memory " +"Management Unit) and a FPU (floating-point unit). This includes the 68020 " +"with an external 68851 PMMU, the 68030, and better, and excludes the " +"EC line of 680x0 processors. See the Linux/m68k FAQ for complete details." msgstr "" #. Tag: para #: hardware.xml:923 #, no-c-format -msgid "There are four major supported &architecture; flavors: Amiga, Atari, Macintosh and VME machines. Amiga and Atari were the first two systems to which Linux was ported; in keeping, they are also the two most well-supported Debian ports. The Macintosh line is supported incompletely, both by Debian and by the Linux kernel; see Linux m68k for Macintosh for project status and supported hardware. The BVM and Motorola single board VMEbus computers are the most recent addition to the list of machines supported by Debian. Ports to other &architecture; architectures, such as the Sun3 architecture and NeXT black box, are underway but not yet supported by Debian." +msgid "" +"There are four major supported &architecture; flavors: " +"Amiga, Atari, Macintosh and VME machines. Amiga and Atari were the first two " +"systems to which Linux was ported; in keeping, they are also the two most " +"well-supported Debian ports. The Macintosh line is supported incompletely, " +"both by Debian and by the Linux kernel; see Linux m68k for Macintosh for project status and supported " +"hardware. The BVM and Motorola single board VMEbus computers are the most " +"recent addition to the list of machines supported by Debian. Ports to other " +"&architecture; architectures, such as the Sun3 architecture and NeXT black " +"box, are underway but not yet supported by Debian." msgstr "" #. Tag: para #: hardware.xml:950 #, no-c-format -msgid "Debian on &arch-title; supports the following platforms: SGI IP22: this platform includes the SGI machines Indy, Indigo 2 and Challenge S. Since these machines are very similar, whenever this document refers to the SGI Indy, the Indigo 2 and Challenge S are meant as well. SGI IP32: this platform is generally known as SGI O2. Broadcom BCM91250A (SWARM): this is an ATX form factor evaluation board from Broadcom based on the dual-core SB1 1250 CPU. Broadcom BCM91480B (BigSur): this is an ATX form factor evaluation board from Broadcom based on the quad-core SB1A 1480 CPU. Complete information regarding supported mips/mipsel machines can be found at the Linux-MIPS homepage. In the following, only the systems supported by the Debian installer will be covered. If you are looking for support for other subarchitectures, please contact the debian-&arch-listname; mailing list." +msgid "" +"Debian on &arch-title; supports the following platforms: " +" SGI IP22: this platform includes the SGI machines Indy, " +"Indigo 2 and Challenge S. Since these machines are very similar, whenever " +"this document refers to the SGI Indy, the Indigo 2 and Challenge S are meant " +"as well. SGI IP32: this platform is " +"generally known as SGI O2. Broadcom " +"BCM91250A (SWARM): this is an ATX form factor evaluation board from Broadcom " +"based on the dual-core SB1 1250 CPU. " +"Broadcom BCM91480B (BigSur): this is an ATX form factor evaluation board " +"from Broadcom based on the quad-core SB1A 1480 CPU. Complete information regarding supported mips/mipsel machines " +"can be found at the Linux-MIPS homepage. In the following, only the systems supported by the Debian installer " +"will be covered. If you are looking for support for other subarchitectures, " +"please contact the debian-&arch-" +"listname; mailing list." msgstr "" #. Tag: para #: hardware.xml:991 #, no-c-format -msgid "On SGI IP22, SGI Indy, Indigo 2 and Challenge S with R4000, R4400, R4600 and R5000 processors are supported by the Debian installation system on big endian MIPS. On SGI IP32, currently only systems based on the R5000 are supported. The Broadcom BCM91250A evaluation board comes with an SB1 1250 chip with two cores which are supported in SMP mode by this installer. Similarly, the BCM91480B evaluation board contains an SB1A 1480 chip with four cores which are supported in SMP mode." +msgid "" +"On SGI IP22, SGI Indy, Indigo 2 and Challenge S with R4000, R4400, R4600 and " +"R5000 processors are supported by the Debian installation system on big " +"endian MIPS. On SGI IP32, currently only systems based on the R5000 are " +"supported. The Broadcom BCM91250A evaluation board comes with an SB1 1250 " +"chip with two cores which are supported in SMP mode by this installer. " +"Similarly, the BCM91480B evaluation board contains an SB1A 1480 chip with " +"four cores which are supported in SMP mode." msgstr "" #. Tag: para #: hardware.xml:1001 #, no-c-format -msgid "Some MIPS machines can be operated in both big and little endian mode. For little endian MIPS, please read the documentation for the mipsel architecture." +msgid "" +"Some MIPS machines can be operated in both big and little endian mode. For " +"little endian MIPS, please read the documentation for the mipsel " +"architecture." msgstr "" #. Tag: para #: hardware.xml:1018 #, no-c-format -msgid "Debian on &arch-title; supports the following platforms: DECstation: various models of the DECstation are supported. Cobalt Microserver: only MIPS based Cobalt machines are covered here. This includes the Cobalt Qube 2700 (Qube1), RaQ, Qube2 and RaQ2, and the Gateway Microserver. Broadcom BCM91250A (SWARM): this is an ATX form factor evaluation board from Broadcom based on the dual-core SB1 1250 CPU. Broadcom BCM91480B (BigSur): this is an ATX form factor evaluation board from Broadcom based on the quad-core SB1A 1480 CPU. Complete information regarding supported mips/mipsel machines can be found at the Linux-MIPS homepage. In the following, only the systems supported by the Debian installer will be covered. If you are looking for support for other subarchitectures, please contact the debian-&arch-listname; mailing list." +msgid "" +"Debian on &arch-title; supports the following platforms: " +" DECstation: various models of the DECstation are supported. " +" Cobalt Microserver: only MIPS based " +"Cobalt machines are covered here. This includes the Cobalt Qube 2700 " +"(Qube1), RaQ, Qube2 and RaQ2, and the Gateway Microserver. Broadcom BCM91250A (SWARM): this is an ATX form " +"factor evaluation board from Broadcom based on the dual-core SB1 1250 CPU. Broadcom BCM91480B (BigSur): this is an " +"ATX form factor evaluation board from Broadcom based on the quad-core SB1A " +"1480 CPU. Complete information regarding " +"supported mips/mipsel machines can be found at the Linux-MIPS homepage. In the following, only the systems " +"supported by the Debian installer will be covered. If you are looking for " +"support for other subarchitectures, please contact the debian-&arch-listname; mailing list." msgstr "" #. Tag: title @@ -1912,8 +2043,14 @@ msgstr "CPU/Gép típusok" #. Tag: para #: hardware.xml:1060 #, no-c-format -msgid "Currently only DECstations with R3000 and R4000/R4400 CPUs are supported by the Debian installation system on little endian MIPS. The Debian installation system works on the following machines:" -msgstr "A Debian telepítő jelenleg csak az R3000 és R4000/R4400 CPU-s DECstation gépeket támogatja a kis-végű MIPS gépek közül. A Debian telepítő rendszer az alábbi gépeken működik:" +msgid "" +"Currently only DECstations with R3000 and R4000/R4400 CPUs are supported by " +"the Debian installation system on little endian MIPS. The Debian " +"installation system works on the following machines:" +msgstr "" +"A Debian telepítő jelenleg csak az R3000 és R4000/R4400 CPU-s DECstation " +"gépeket támogatja a kis-végű MIPS gépek közül. A Debian telepítő rendszer az " +"alábbi gépeken működik:" #. Tag: entry #: hardware.xml:1072 @@ -1946,17 +2083,13 @@ msgid "DECstation 5000/1xx" msgstr "DECstation 5000/1xx" #. Tag: entry -#: hardware.xml:1080 -#: hardware.xml:1090 -#: hardware.xml:1095 -#: hardware.xml:1105 +#: hardware.xml:1080 hardware.xml:1090 hardware.xml:1095 hardware.xml:1105 #, no-c-format msgid "R3000" msgstr "R3000" #. Tag: entry -#: hardware.xml:1081 -#: hardware.xml:1086 +#: hardware.xml:1081 hardware.xml:1086 #, no-c-format msgid "3MIN" msgstr "3MIN" @@ -1968,8 +2101,7 @@ msgid "DECstation 5000/150" msgstr "DECstation 5000/150" #. Tag: entry -#: hardware.xml:1085 -#: hardware.xml:1110 +#: hardware.xml:1085 hardware.xml:1110 #, no-c-format msgid "R4000" msgstr "R4000" @@ -1993,8 +2125,7 @@ msgid "DECstation 5000/240" msgstr "DECstation 5000/240" #. Tag: entry -#: hardware.xml:1096 -#: hardware.xml:1101 +#: hardware.xml:1096 hardware.xml:1101 #, no-c-format msgid "3MAX+" msgstr "3MAX+" @@ -2018,8 +2149,7 @@ msgid "Personal DECstation 5000/xx" msgstr "Personal DECstation 5000/xx" #. Tag: entry -#: hardware.xml:1106 -#: hardware.xml:1111 +#: hardware.xml:1106 hardware.xml:1111 #, no-c-format msgid "Maxine" msgstr "Maxine" @@ -2033,13 +2163,23 @@ msgstr "Personal DECstation 5000/50" #. Tag: para #: hardware.xml:1116 #, no-c-format -msgid "All Cobalt machines are supported. In the past, only machines with a serial console were supported (that is, all machines except for the Qube 2700, aka Qube1). However, installations are now also possible through SSH." -msgstr "Minden Cobalt gép támogatott. Régen csak a soros konzolos gépek voltak támogatottak (vagyis minden, kivéve a Qube 2700 más nevén Qube1 gépet). De ma már ez is megoldott az SSH lehetőséggel." +msgid "" +"All Cobalt machines are supported. In the past, only machines with a serial " +"console were supported (that is, all machines except for the Qube 2700, aka " +"Qube1). However, installations are now also possible through SSH." +msgstr "" +"Minden Cobalt gép támogatott. Régen csak a soros konzolos gépek voltak " +"támogatottak (vagyis minden, kivéve a Qube 2700 más nevén Qube1 gépet). De " +"ma már ez is megoldott az SSH lehetőséggel." #. Tag: para #: hardware.xml:1123 #, no-c-format -msgid "The Broadcom BCM91250A evaluation board comes with an SB1 1250 chip with two cores which are supported in SMP mode by this installer. Similarly, the BCM91480B evaluation board contains an SB1A 1480 chip with four cores which are supported in SMP mode." +msgid "" +"The Broadcom BCM91250A evaluation board comes with an SB1 1250 chip with two " +"cores which are supported in SMP mode by this installer. Similarly, the " +"BCM91480B evaluation board contains an SB1A 1480 chip with four cores which " +"are supported in SMP mode." msgstr "" #. Tag: title @@ -2051,16 +2191,30 @@ msgstr "" #. Tag: para #: hardware.xml:1134 #, no-c-format -msgid "A serial console is available on all supported DECstations (9600 bps, 8N1). To use the serial console, you have to boot the installer image with the console=ttySx kernel parameter (with x being the number of the serial port you have your terminal connected to — usually 2, but 0 for the Personal DECstations). On 3MIN and 3MAX+ (DECstation 5000/1xx, 5000/240 and 5000/260) a local console is available with the PMAG-BA and the PMAGB-B graphics options." +msgid "" +"A serial console is available on all supported DECstations (9600 bps, 8N1). " +"To use the serial console, you have to boot the installer image with the " +"console=ttySx kernel parameter " +"(with x being the number of the serial port you " +"have your terminal connected to — usually 2, but " +"0 for the Personal DECstations). On 3MIN and 3MAX+ " +"(DECstation 5000/1xx, 5000/240 and 5000/260) a local console is available " +"with the PMAG-BA and the PMAGB-B graphics options." msgstr "" #. Tag: para #: hardware.xml:1145 #, no-c-format msgid "" -"If you have a Linux system to use as serial terminal, an easy way is to run cu In Woody this command was part of the uucp package, but in later releases it is available as a separate package. on it. Example: \n" +"If you have a Linux system to use as serial terminal, an easy way is to run " +"cu In Woody this command was part of the " +"uucp package, but in later releases it is available " +"as a separate package. on it. Example: " +"\n" "$ cu -l /dev/ttyS1 -s 9600\n" -" where the option -l (line) sets the serial port to use and -s (speed) sets the speed for the connection (9600 bits per second)." +" where the option -l (line) " +"sets the serial port to use and -s (speed) sets the speed " +"for the connection (9600 bits per second)." msgstr "" #. Tag: para @@ -2072,13 +2226,21 @@ msgstr "" #. Tag: para #: hardware.xml:1177 #, no-c-format -msgid "There are four major supported &architecture; subarchitectures: PMac (Power-Macintosh or PowerMac), PReP, APUS (Amiga Power-UP System), and CHRP machines. Each subarchitecture has its own boot methods. In addition, there are four different kernel flavours, supporting different CPU variants." +msgid "" +"There are four major supported &architecture; " +"subarchitectures: PMac (Power-Macintosh or PowerMac), PReP, APUS (Amiga " +"Power-UP System), and CHRP machines. Each subarchitecture has its own boot " +"methods. In addition, there are four different kernel flavours, supporting " +"different CPU variants." msgstr "" #. Tag: para #: hardware.xml:1185 #, no-c-format -msgid "Ports to other &architecture; architectures, such as the Be-Box and MBX architecture, are underway but not yet supported by Debian. We may have a 64-bit port in the future." +msgid "" +"Ports to other &architecture; architectures, such as " +"the Be-Box and MBX architecture, are underway but not yet supported by " +"Debian. We may have a 64-bit port in the future." msgstr "" #. Tag: title @@ -2090,7 +2252,9 @@ msgstr "" #. Tag: para #: hardware.xml:1195 #, no-c-format -msgid "There are four flavours of the powerpc kernel in Debian, based on the CPU type:" +msgid "" +"There are four flavours of the powerpc kernel in Debian, based on the CPU " +"type:" msgstr "" #. Tag: term @@ -2102,7 +2266,10 @@ msgstr "" #. Tag: para #: hardware.xml:1203 #, no-c-format -msgid "Most systems use this kernel flavour, which supports the PowerPC 601, 603, 604, 740, 750, and 7400 processors. All Apple PowerMac machines up to and including the one marketed as G4 use one of these processors." +msgid "" +"Most systems use this kernel flavour, which supports the PowerPC 601, 603, " +"604, 740, 750, and 7400 processors. All Apple PowerMac machines up to and " +"including the one marketed as G4 use one of these processors." msgstr "" #. Tag: term @@ -2120,19 +2287,26 @@ msgstr "" #. Tag: para #: hardware.xml:1218 #, no-c-format -msgid "The POWER3 processor is used in older IBM 64-bit server systems: known models include the IntelliStation POWER Model 265, the pSeries 610 and 640, and the RS/6000 7044-170, 7043-260, and 7044-270." +msgid "" +"The POWER3 processor is used in older IBM 64-bit server systems: known " +"models include the IntelliStation POWER Model 265, the pSeries 610 and 640, " +"and the RS/6000 7044-170, 7043-260, and 7044-270." msgstr "" #. Tag: para #: hardware.xml:1224 #, no-c-format -msgid "The POWER4 processor is used in more recent IBM 64-bit server systems: known models include the pSeries 615, 630, 650, 655, 670, and 690." +msgid "" +"The POWER4 processor is used in more recent IBM 64-bit server systems: known " +"models include the pSeries 615, 630, 650, 655, 670, and 690." msgstr "" #. Tag: para #: hardware.xml:1229 #, no-c-format -msgid "Systems using the Apple G5 (PPC970FX processor) are also based on the POWER4 architecture, and use this kernel flavour." +msgid "" +"Systems using the Apple G5 (PPC970FX processor) are also based on the POWER4 " +"architecture, and use this kernel flavour." msgstr "" #. Tag: term @@ -2156,7 +2330,9 @@ msgstr "" #. Tag: para #: hardware.xml:1248 #, no-c-format -msgid "This kernel flavour supports the Amiga Power-UP System, though it is currently disabled." +msgid "" +"This kernel flavour supports the Amiga Power-UP System, though it is " +"currently disabled." msgstr "" #. Tag: title @@ -2168,32 +2344,46 @@ msgstr "" #. Tag: para #: hardware.xml:1263 #, no-c-format -msgid "Apple (and briefly a few other manufacturers — Power Computing, for example) made a series of Macintosh computers based on the PowerPC processor. For purposes of architecture support, they are categorized as NuBus (not supported by Debian), OldWorld, and NewWorld." +msgid "" +"Apple (and briefly a few other manufacturers — Power Computing, for " +"example) made a series of Macintosh computers based on the PowerPC " +"processor. For purposes of architecture support, they are categorized as " +"NuBus (not supported by Debian), OldWorld, and NewWorld." msgstr "" #. Tag: para #: hardware.xml:1270 #, no-c-format -msgid "OldWorld systems are most Power Macintoshes with a floppy drive and a PCI bus. Most 603, 603e, 604, and 604e based Power Macintoshes are OldWorld machines. Those pre-iMac PowerPC models from Apple use a four digit naming scheme, except for the beige colored G3 systems, which are also OldWorld." +msgid "" +"OldWorld systems are most Power Macintoshes with a floppy drive and a PCI " +"bus. Most 603, 603e, 604, and 604e based Power Macintoshes are OldWorld " +"machines. Those pre-iMac PowerPC models from Apple use a four digit naming " +"scheme, except for the beige colored G3 systems, which are also OldWorld." msgstr "" #. Tag: para #: hardware.xml:1278 #, no-c-format -msgid "The so called NewWorld PowerMacs are any PowerMacs in translucent colored plastic cases and later models. That includes all iMacs, iBooks, G4 systems, blue colored G3 systems, and most PowerBooks manufactured in and after 1999. The NewWorld PowerMacs are also known for using the ROM in RAM system for MacOS, and were manufactured from mid-1998 onwards." +msgid "" +"The so called NewWorld PowerMacs are any PowerMacs in translucent colored " +"plastic cases and later models. That includes all iMacs, iBooks, G4 systems, " +"blue colored G3 systems, and most PowerBooks manufactured in and after 1999. " +"The NewWorld PowerMacs are also known for using the ROM in RAM system for MacOS, and were manufactured from mid-1998 onwards." msgstr "" #. Tag: para #: hardware.xml:1286 #, no-c-format -msgid "Specifications for Apple hardware are available at AppleSpec, and, for older hardware, AppleSpec Legacy." +msgid "" +"Specifications for Apple hardware are available at AppleSpec, and, for older " +"hardware, AppleSpec Legacy." msgstr "" #. Tag: entry -#: hardware.xml:1302 -#: hardware.xml:1437 -#: hardware.xml:1481 -#: hardware.xml:1510 +#: hardware.xml:1302 hardware.xml:1437 hardware.xml:1481 hardware.xml:1510 #, no-c-format msgid "Model Name/Number" msgstr "" @@ -2217,22 +2407,10 @@ msgid "iMac Bondi Blue, 5 Flavors, Slot Loading" msgstr "" #. Tag: entry -#: hardware.xml:1311 -#: hardware.xml:1314 -#: hardware.xml:1317 -#: hardware.xml:1320 -#: hardware.xml:1323 -#: hardware.xml:1326 -#: hardware.xml:1329 -#: hardware.xml:1332 -#: hardware.xml:1335 -#: hardware.xml:1338 -#: hardware.xml:1341 -#: hardware.xml:1344 -#: hardware.xml:1347 -#: hardware.xml:1350 -#: hardware.xml:1353 -#: hardware.xml:1356 +#: hardware.xml:1311 hardware.xml:1314 hardware.xml:1317 hardware.xml:1320 +#: hardware.xml:1323 hardware.xml:1326 hardware.xml:1329 hardware.xml:1332 +#: hardware.xml:1335 hardware.xml:1338 hardware.xml:1341 hardware.xml:1344 +#: hardware.xml:1347 hardware.xml:1350 hardware.xml:1353 hardware.xml:1356 #, no-c-format msgid "NewWorld" msgstr "NewWorld" @@ -2334,22 +2512,10 @@ msgid "Performa 4400, 54xx, 5500" msgstr "Performa 4400, 54xx, 5500" #. Tag: entry -#: hardware.xml:1359 -#: hardware.xml:1362 -#: hardware.xml:1365 -#: hardware.xml:1368 -#: hardware.xml:1371 -#: hardware.xml:1374 -#: hardware.xml:1377 -#: hardware.xml:1380 -#: hardware.xml:1383 -#: hardware.xml:1386 -#: hardware.xml:1389 -#: hardware.xml:1392 -#: hardware.xml:1398 -#: hardware.xml:1401 -#: hardware.xml:1407 -#: hardware.xml:1413 +#: hardware.xml:1359 hardware.xml:1362 hardware.xml:1365 hardware.xml:1368 +#: hardware.xml:1371 hardware.xml:1374 hardware.xml:1377 hardware.xml:1380 +#: hardware.xml:1383 hardware.xml:1386 hardware.xml:1389 hardware.xml:1392 +#: hardware.xml:1398 hardware.xml:1401 hardware.xml:1407 hardware.xml:1413 #: hardware.xml:1419 #, no-c-format msgid "OldWorld" @@ -2464,8 +2630,7 @@ msgid "APS Tech M*Power 604e/2000" msgstr "APS Tech M*Power 604e/2000" #. Tag: entry -#: hardware.xml:1417 -#: hardware.xml:1443 +#: hardware.xml:1417 hardware.xml:1443 #, no-c-format msgid "Motorola" msgstr "Motorola" @@ -2513,8 +2678,7 @@ msgid "MCP(N)750" msgstr "MCP(N)750" #. Tag: entry -#: hardware.xml:1456 -#: hardware.xml:1487 +#: hardware.xml:1456 hardware.xml:1487 #, no-c-format msgid "IBM RS/6000" msgstr "IBM RS/6000" @@ -2594,7 +2758,17 @@ msgstr "Nubus PowerMac al-architektúra (nem-támogatott)" #. Tag: para #: hardware.xml:1527 #, no-c-format -msgid "NuBus systems are not currently supported by Debian/powerpc. The monolithic Linux/PPC kernel architecture does not have support for these machines; instead, one must use the MkLinux Mach microkernel, which Debian does not yet support. These include the following: Power Macintosh 6100, 7100, 8100 Performa 5200, 6200, 6300 Powerbook 1400, 2300, and 5300 Workgroup Server 6150, 8150, 9150 A linux kernel for these machines and limited support is available at ." +msgid "" +"NuBus systems are not currently supported by Debian/powerpc. The monolithic " +"Linux/PPC kernel architecture does not have support for these machines; " +"instead, one must use the MkLinux Mach microkernel, which Debian does not " +"yet support. These include the following: " +"Power Macintosh 6100, 7100, 8100 " +"Performa 5200, 6200, 6300 Powerbook " +"1400, 2300, and 5300 Workgroup Server " +"6150, 8150, 9150 A linux kernel for these " +"machines and limited support is available at ." msgstr "" #. Tag: title @@ -2606,19 +2780,33 @@ msgstr "" #. Tag: para #: hardware.xml:1566 #, no-c-format -msgid "Macintosh computers using the 680x0 series of processors are not in the PowerPC family but are instead m68k machines. Those models start with Mac II series, go on to the LC family, then the Centris series, and culminate in the Quadras and Performas. These models usually have a Roman numeral or 3-digit model number such as Mac IIcx, LCIII or Quadra 950." +msgid "" +"Macintosh computers using the 680x0 series of processors are not in the PowerPC family but are instead m68k machines. Those models " +"start with Mac II series, go on to the LC " +"family, then the Centris series, and culminate in the Quadras and Performas. " +"These models usually have a Roman numeral or 3-digit model number such as " +"Mac IIcx, LCIII or Quadra 950." msgstr "" #. Tag: para #: hardware.xml:1575 #, no-c-format -msgid "This model range started with the Mac II (Mac II, IIx, IIcx, IIci, IIsi, IIvi, IIvx, IIfx), then the LC (LC, LCII, III, III+, 475, 520, 550, 575, 580, 630), then the Mac TV, then the Centris (610, 650, 660AV), the Quadra (605, 610, 630, 650, 660AV, 700, 800, 840AV, 900, 950), and finally the Performa 200-640CD." +msgid "" +"This model range started with the Mac II (Mac II, IIx, IIcx, IIci, IIsi, " +"IIvi, IIvx, IIfx), then the LC (LC, LCII, III, III+, 475, 520, 550, 575, " +"580, 630), then the Mac TV, then the Centris (610, 650, 660AV), the Quadra " +"(605, 610, 630, 650, 660AV, 700, 800, 840AV, 900, 950), and finally the " +"Performa 200-640CD." msgstr "" #. Tag: para #: hardware.xml:1583 #, no-c-format -msgid "In laptops, it started with the Mac Portable, then the PowerBook 100-190cs and the PowerBook Duo 210-550c (excluding PowerBook 500 which is Nubus, please see the section above)." +msgid "" +"In laptops, it started with the Mac Portable, then the PowerBook 100-190cs " +"and the PowerBook Duo 210-550c (excluding PowerBook 500 which is Nubus, " +"please see the section above)." msgstr "" #. Tag: title @@ -2630,13 +2818,34 @@ msgstr "" #. Tag: para #: hardware.xml:1600 #, no-c-format -msgid "Complete information regarding supported S/390 and zSeries machines can be found in IBM's Redbook Linux for IBM eServer zSeries and S/390: Distributions in chapter 2.1 or at the zSeries page at the developerWorks. In short, G5, Multiprise 3000, G6 and all zSeries are fully supported; Multiprise 2000, G3 and G4 machines are supported with IEEE floating point emulation and thus degraded performance." +msgid "" +"Complete information regarding supported S/390 and zSeries machines can be " +"found in IBM's Redbook Linux for IBM eServer zSeries and S/390: " +"Distributions in chapter 2.1 or at the zSeries page at the " +"developerWorks. In short, G5, Multiprise 3000, G6 and all zSeries " +"are fully supported; Multiprise 2000, G3 and G4 machines are supported with " +"IEEE floating point emulation and thus degraded performance." msgstr "" #. Tag: para #: hardware.xml:1623 #, no-c-format -msgid "Currently the &architecture; port supports several types of Sparc systems. The most common identifiers for Sparc systems are sun4, sun4c, sun4m, sun4d and sun4u. Currently we do not support very old sun4 hardware. However, the other systems are supported. Sun4d has been tested the least of these, so expect possible problems with regard to the kernel stability. Sun4c and Sun4m, the most common of the older Sparc hardware, includes such systems as SparcStation 1, 1+, IPC, IPX and the SparcStation LX, 5, 10, and 20, respectively. The UltraSPARC class systems fall under the sun4u identifier, and are supported using the sun4u set of install images. Some systems that fall under these supported identifiers are known to not be supported. Known unsupported systems are the AP1000 multicomputer and the Tadpole Sparcbook 1. See the Linux for SPARCProcessors FAQ for complete information." +msgid "" +"Currently the &architecture; port supports several " +"types of Sparc systems. The most common identifiers for Sparc systems are " +"sun4, sun4c, sun4m, sun4d and sun4u. Currently we do not support very old " +"sun4 hardware. However, the other systems are supported. Sun4d has been " +"tested the least of these, so expect possible problems with regard to the " +"kernel stability. Sun4c and Sun4m, the most common of the older Sparc " +"hardware, includes such systems as SparcStation 1, 1+, IPC, IPX and the " +"SparcStation LX, 5, 10, and 20, respectively. The UltraSPARC class systems " +"fall under the sun4u identifier, and are supported using the sun4u set of " +"install images. Some systems that fall under these supported identifiers are " +"known to not be supported. Known unsupported systems are the AP1000 " +"multicomputer and the Tadpole Sparcbook 1. See the Linux for SPARCProcessors FAQ for complete information." msgstr "" #. Tag: title @@ -2648,19 +2857,34 @@ msgstr "" #. Tag: para #: hardware.xml:1644 #, no-c-format -msgid "Some older Sun workstations, notably the Sun IPX and Sun IPC have memory banks located at fixed locations in physical memory. Thus if the banks are not filled gaps will exist in the physical memory space. The Linux installation requires a contiguous memory block into which to load the kernel and the initial RAMdisk. If this is not available a Data Access Exception will result." +msgid "" +"Some older Sun workstations, notably the Sun IPX and Sun IPC have memory " +"banks located at fixed locations in physical memory. Thus if the banks are " +"not filled gaps will exist in the physical memory space. The Linux " +"installation requires a contiguous memory block into which to load the " +"kernel and the initial RAMdisk. If this is not available a Data " +"Access Exception will result." msgstr "" #. Tag: para #: hardware.xml:1653 #, no-c-format -msgid "Thus you must configure the memory so that the lowest memory block is contiguous for at least 8Mb. In the IPX and IPC cited above, memory banks are mapped in at 16Mb boundaries. In effect this means that you must have a sufficiently large SIMM in bank zero to hold the kernel and RAMdisk. In this case 4Mb is not sufficient." +msgid "" +"Thus you must configure the memory so that the lowest memory block is " +"contiguous for at least 8Mb. In the IPX and IPC cited above, memory banks " +"are mapped in at 16Mb boundaries. In effect this means that you must have a " +"sufficiently large SIMM in bank zero to hold the kernel and RAMdisk. In this " +"case 4Mb is not sufficient." msgstr "" #. Tag: para #: hardware.xml:1661 #, no-c-format -msgid "Example: In a Sun IPX you have a 16Mb SIMM and a 4Mb SIMM. There are four SIMM banks (0,1,2,3). [Bank zero is that furthest away from the SBUS connectors]. You must therefore install the 16Mb SIMM in bank 0; it is then recommended to install the 4Mb SIMM in bank 2." +msgid "" +"Example: In a Sun IPX you have a 16Mb SIMM and a 4Mb SIMM. There are four " +"SIMM banks (0,1,2,3). [Bank zero is that furthest away from the SBUS " +"connectors]. You must therefore install the 16Mb SIMM in bank 0; it is then " +"recommended to install the 4Mb SIMM in bank 2." msgstr "" #. Tag: title @@ -2672,19 +2896,32 @@ msgstr "" #. Tag: para #: hardware.xml:1673 #, no-c-format -msgid "Especially in the case of older Sun workstations, it is very common for there to be an onboard framebuffer which has been superseded (for example the bwtwo on a sun IPC), and an SBUS card containing a later probably accelerated buffer is then plugged in to an SBUS slot. Under Solaris/SunOS this causes no problems because both cards are initialized." +msgid "" +"Especially in the case of older Sun workstations, it is very common for " +"there to be an onboard framebuffer which has been superseded (for example " +"the bwtwo on a sun IPC), and an SBUS card containing a later probably " +"accelerated buffer is then plugged in to an SBUS slot. Under Solaris/SunOS " +"this causes no problems because both cards are initialized." msgstr "" #. Tag: para #: hardware.xml:1682 #, no-c-format -msgid "However with Linux this can cause a problem, in that the boot PROM monitor may display its output on this additional card; however the linux kernel boot messages may then be directed to the original on board framebuffer, leaving no error messages on the screen, with the machine apparently stuck loading the RAMdisk." +msgid "" +"However with Linux this can cause a problem, in that the boot PROM monitor " +"may display its output on this additional card; however the linux kernel " +"boot messages may then be directed to the original on board framebuffer, " +"leaving no error messages on the screen, with the " +"machine apparently stuck loading the RAMdisk." msgstr "" #. Tag: para #: hardware.xml:1690 #, no-c-format -msgid "To avoid this problem, connect the monitor (if required) to the video card in the lowest numbered SBUS slot (on motherboard card counts as below external slots). Alternatively it is possible to use a serial console." +msgid "" +"To avoid this problem, connect the monitor (if required) to the video card " +"in the lowest numbered SBUS slot (on motherboard card counts as below " +"external slots). Alternatively it is possible to use a serial console." msgstr "" #. Tag: title @@ -2696,25 +2933,45 @@ msgstr "" #. Tag: para #: hardware.xml:1703 #, no-c-format -msgid "You should be using a VGA-compatible display interface for the console terminal. Nearly every modern display card is compatible with VGA. Ancient standards such CGA, MDA, or HGA should also work, assuming you do not require X11 support. Note that X11 is not used during the installation process described in this document." +msgid "" +"You should be using a VGA-compatible display interface for the console " +"terminal. Nearly every modern display card is compatible with VGA. Ancient " +"standards such CGA, MDA, or HGA should also work, assuming you do not " +"require X11 support. Note that X11 is not used during the installation " +"process described in this document." msgstr "" #. Tag: para #: hardware.xml:1711 #, no-c-format -msgid "Debian's support for graphical interfaces is determined by the underlying support found in X.Org's X11 system. Most AGP, PCI and PCIe video cards work under X.Org. Details on supported graphics buses, cards, monitors, and pointing devices can be found at . Debian &release; ships with X.Org version &x11ver;." +msgid "" +"Debian's support for graphical interfaces is determined by the underlying " +"support found in X.Org's X11 system. Most AGP, PCI and PCIe video cards work " +"under X.Org. Details on supported graphics buses, cards, monitors, and " +"pointing devices can be found at . Debian " +"&release; ships with X.Org version &x11ver;." msgstr "" #. Tag: para #: hardware.xml:1720 #, no-c-format -msgid "The X.Org X11 window system is only supported on the SGI Indy and the O2. The Broadcom BCM91250A and BCM91480B evaluation boards have standard 3.3v PCI slots and support VGA emulation or Linux framebuffer on a selected range of graphics cards. A compatibility listing for Broadcom evaluation boards is available." +msgid "" +"The X.Org X11 window system is only supported on the SGI Indy and the O2. " +"The Broadcom BCM91250A and BCM91480B evaluation boards have standard 3.3v " +"PCI slots and support VGA emulation or Linux framebuffer on a selected range " +"of graphics cards. A compatibility " +"listing for Broadcom evaluation boards is available." msgstr "" #. Tag: para #: hardware.xml:1729 #, no-c-format -msgid "The X.Org X11 window system is supported on some DECstation models. The Broadcom BCM91250A and BCM91480B evaluation boards have standard 3.3v PCI slots and support VGA emulation or Linux framebuffer on a selected range of graphics cards. A compatibility listing for Broadcom evaluation boards is available." +msgid "" +"The X.Org X11 window system is supported on some DECstation models. The " +"Broadcom BCM91250A and BCM91480B evaluation boards have standard 3.3v PCI " +"slots and support VGA emulation or Linux framebuffer on a selected range of " +"graphics cards. A compatibility " +"listing for Broadcom evaluation boards is available." msgstr "" #. Tag: title @@ -2726,14 +2983,14 @@ msgstr "" #. Tag: para #: hardware.xml:1741 #, no-c-format -msgid "Laptops are also supported. Laptops are often specialized or contain proprietary hardware. To see if your particular laptop works well with GNU/Linux, see the Linux Laptop pages" +msgid "" +"Laptops are also supported. Laptops are often specialized or contain " +"proprietary hardware. To see if your particular laptop works well with GNU/" +"Linux, see the Linux Laptop pages" msgstr "" #. Tag: title -#: hardware.xml:1752 -#: hardware.xml:1774 -#: hardware.xml:1794 -#: hardware.xml:1817 +#: hardware.xml:1752 hardware.xml:1774 hardware.xml:1794 hardware.xml:1817 #, no-c-format msgid "Multiple Processors" msgstr "" @@ -2741,49 +2998,92 @@ msgstr "" #. Tag: para #: hardware.xml:1753 #, no-c-format -msgid "Multi-processor support — also called symmetric multi-processing or SMP — is available for this architecture. The standard Debian &release; kernel image was compiled with SMP support. This should not prevent installation, since the SMP kernel should boot on non-SMP systems; the kernel will simply cause a bit more overhead." +msgid "" +"Multi-processor support — also called symmetric multi-" +"processing or SMP — is available for this architecture. The " +"standard Debian &release; kernel image was compiled with SMP support. This " +"should not prevent installation, since the SMP kernel should boot on non-SMP " +"systems; the kernel will simply cause a bit more overhead." msgstr "" #. Tag: para #: hardware.xml:1761 #, no-c-format -msgid "In order to optimize the kernel for single CPU systems, you'll have to replace the standard Debian kernel. You can find a discussion of how to do this in . At this time (kernel version &kernelversion;) the way you disable SMP is to deselect &smp-config-option; in the &smp-config-section; section of the kernel config." +msgid "" +"In order to optimize the kernel for single CPU systems, you'll have to " +"replace the standard Debian kernel. You can find a discussion of how to do " +"this in . At this time (kernel version " +"&kernelversion;) the way you disable SMP is to deselect &smp-config-" +"option; in the &smp-config-section; section of the " +"kernel config." msgstr "" #. Tag: para #: hardware.xml:1776 #, no-c-format -msgid "Multi-processor support — also called symmetric multi-processing or SMP — is available for this architecture. The standard Debian &release; kernel image was compiled with SMP-alternatives support. This means that the kernel will detect the number of processors (or processor cores) and will automatically deactivate SMP on uniprocessor systems." +msgid "" +"Multi-processor support — also called symmetric multi-" +"processing or SMP — is available for this architecture. The " +"standard Debian &release; kernel image was compiled with SMP-" +"alternatives support. This means that the kernel will detect the " +"number of processors (or processor cores) and will automatically deactivate " +"SMP on uniprocessor systems." msgstr "" #. Tag: para #: hardware.xml:1785 #, no-c-format -msgid "The 486 flavour of the Debian kernel image packages for &arch-title; is not compiled with SMP support." +msgid "" +"The 486 flavour of the Debian kernel image packages for &arch-title; is not " +"compiled with SMP support." msgstr "" #. Tag: para #: hardware.xml:1795 #, no-c-format -msgid "Multi-processor support — also called symmetric multi-processing or SMP — is available for this architecture. However, the standard Debian &release; kernel image does not support SMP. This should not prevent installation, since the standard, non-SMP kernel should boot on SMP systems; the kernel will simply use the first CPU." +msgid "" +"Multi-processor support — also called symmetric multi-" +"processing or SMP — is available for this architecture. " +"However, the standard Debian &release; kernel image does not support SMP. " +"This should not prevent installation, since the standard, non-SMP kernel " +"should boot on SMP systems; the kernel will simply use the first CPU." msgstr "" #. Tag: para #: hardware.xml:1804 #, no-c-format -msgid "In order to take advantage of multiple processors, you'll have to replace the standard Debian kernel. You can find a discussion of how to do this in . At this time (kernel version &kernelversion;) the way you enable SMP is to select &smp-config-option; in the &smp-config-section; section of the kernel config." +msgid "" +"In order to take advantage of multiple processors, you'll have to replace " +"the standard Debian kernel. You can find a discussion of how to do this in " +". At this time (kernel version " +"&kernelversion;) the way you enable SMP is to select &smp-config-" +"option; in the &smp-config-section; section of the " +"kernel config." msgstr "" #. Tag: para #: hardware.xml:1818 #, no-c-format -msgid "Multi-processor support — also called symmetric multi-processing or SMP — is available for this architecture, and is supported by a precompiled Debian kernel image. Depending on your install media, this SMP-capable kernel may or may not be installed by default. This should not prevent installation, since the standard, non-SMP kernel should boot on SMP systems; the kernel will simply use the first CPU." +msgid "" +"Multi-processor support — also called symmetric multi-" +"processing or SMP — is available for this architecture, and is " +"supported by a precompiled Debian kernel image. Depending on your install " +"media, this SMP-capable kernel may or may not be installed by default. This " +"should not prevent installation, since the standard, non-SMP kernel should " +"boot on SMP systems; the kernel will simply use the first CPU." msgstr "" #. Tag: para #: hardware.xml:1828 #, no-c-format -msgid "In order to take advantage of multiple processors, you should check to see if a kernel package that supports SMP is installed, and if not, choose an appropriate kernel package. You can also build your own customized kernel to support SMP. You can find a discussion of how to do this in . At this time (kernel version &kernelversion;) the way you enable SMP is to select &smp-config-option; in the &smp-config-section; section of the kernel config." +msgid "" +"In order to take advantage of multiple processors, you should check to see " +"if a kernel package that supports SMP is installed, and if not, choose an " +"appropriate kernel package. You can also build your own customized kernel to " +"support SMP. You can find a discussion of how to do this in . At this time (kernel version &kernelversion;) the way " +"you enable SMP is to select &smp-config-option; in the " +"&smp-config-section; section of the kernel config." msgstr "" #. Tag: title @@ -2795,8 +3095,19 @@ msgstr "Telepítő média" #. Tag: para #: hardware.xml:1851 #, no-c-format -msgid "This section will help you determine which different media types you can use to install Debian. For example, if you have a floppy disk drive on your machine, it can be used to install Debian. There is a whole chapter devoted media, , which lists the advantages and disadvantages of each media type. You may want to refer back to this page once you reach that section." -msgstr "E szakasz leírja, milyen média típusokat használhatsz a Debian telepítésére. Például, ha van egy flopi lemez meghajtód a gépen, telepíthető róla a Debian. Van egy egész fejezet, mely erről szól, a , mely leírja minden média típus előnyét és hátrányát. Amennyiben odaugrasz, vissza is térhetsz majd ide." +msgid "" +"This section will help you determine which different media types you can use " +"to install Debian. For example, if you have a floppy disk drive on your " +"machine, it can be used to install Debian. There is a whole chapter devoted " +"media, , which lists the advantages and " +"disadvantages of each media type. You may want to refer back to this page " +"once you reach that section." +msgstr "" +"E szakasz leírja, milyen média típusokat használhatsz a Debian telepítésére. " +"Például, ha van egy flopi lemez meghajtód a gépen, telepíthető róla a " +"Debian. Van egy egész fejezet, mely erről szól, a , mely leírja minden média típus előnyét és hátrányát. Amennyiben " +"odaugrasz, vissza is térhetsz majd ide." #. Tag: title #: hardware.xml:1862 @@ -2807,8 +3118,14 @@ msgstr "Flopik" #. Tag: para #: hardware.xml:1863 #, no-c-format -msgid "In some cases, you'll have to do your first boot from floppy disks. Generally, all you will need is a high-density (1440 kilobytes) 3.5 inch floppy drive." -msgstr "Lehet, hogy semmilyen más lehetőség nem áll rendelkezésedre, mint egy flopiról indítani. Ehhez csak egy nagy-sűrűségű (1440 kilobyte-os) 3,5 hüvelykes flopi meghajtó kell." +msgid "" +"In some cases, you'll have to do your first boot from floppy disks. " +"Generally, all you will need is a high-density (1440 kilobytes) 3.5 inch " +"floppy drive." +msgstr "" +"Lehet, hogy semmilyen más lehetőség nem áll rendelkezésedre, mint egy " +"flopiról indítani. Ehhez csak egy nagy-sűrűségű (1440 kilobyte-os) 3,5 " +"hüvelykes flopi meghajtó kell." #. Tag: para #: hardware.xml:1869 @@ -2825,67 +3142,135 @@ msgstr "CD-ROM/DVD-ROM" #. Tag: para #: hardware.xml:1878 #, no-c-format -msgid "Whenever you see CD-ROM in this manual, it applies to both CD-ROMs and DVD-ROMs, because both technologies are really the same from the operating system's point of view, except for some very old nonstandard CD-ROM drives which are neither SCSI nor IDE/ATAPI." -msgstr "Ha e kézikönyvben azt látod: CD-ROM, az a CD-ROM és DVD-ROM eszközökre egyaránt vonatkozik, mert az operációs rendszer szempontjából ez ugyanaz, kivév egyes nagyon régi nem-szabványos CD-ROM meghajtókat, melyek nem SCSI vagy IDE/ATAPI elvűek." +msgid "" +"Whenever you see CD-ROM in this manual, it applies to both CD-" +"ROMs and DVD-ROMs, because both technologies are really the same from the " +"operating system's point of view, except for some very old nonstandard CD-" +"ROM drives which are neither SCSI nor IDE/ATAPI." +msgstr "" +"Ha e kézikönyvben azt látod: CD-ROM, az a CD-ROM és DVD-ROM " +"eszközökre egyaránt vonatkozik, mert az operációs rendszer szempontjából ez " +"ugyanaz, kivév egyes nagyon régi nem-szabványos CD-ROM meghajtókat, melyek " +"nem SCSI vagy IDE/ATAPI elvűek." #. Tag: para #: hardware.xml:1885 #, no-c-format -msgid "CD-ROM based installation is supported for some architectures. On machines which support bootable CD-ROMs, you should be able to do a completely floppy-less tape-less installation. Even if your system doesn't support booting from a CD-ROM, you can use the CD-ROM in conjunction with the other techniques to install your system, once you've booted up by other means; see ." -msgstr "A CD-ROM alapú telepítés a legtöbb architektúrán támogatott. Az indítható CD-ROM lemezeket támogató gépeken teljesen flopi-mentes szalag-mentes telepítés végezhető. Még ha a rendszer nem is támogatja a CD-ROM lemezről indítást, a CD-ROM más módokkal együtt használható a telepítésre, miután az indítás megtörtént másképpen; lásd a részt." +msgid "" +"CD-ROM based installation is supported for some architectures. On machines " +"which support bootable CD-ROMs, you should be able to do a completely " +"floppy-less tape-" +"less installation. Even if your system doesn't support booting from " +"a CD-ROM, you can use the CD-ROM in conjunction with the other techniques to " +"install your system, once you've booted up by other means; see ." +msgstr "" +"A CD-ROM alapú telepítés a legtöbb architektúrán támogatott. Az indítható CD-" +"ROM lemezeket támogató gépeken teljesen flopi-" +"mentes szalag-mentes telepítés " +"végezhető. Még ha a rendszer nem is támogatja a CD-ROM lemezről indítást, a " +"CD-ROM más módokkal együtt használható a telepítésre, miután az indítás " +"megtörtént másképpen; lásd a részt." #. Tag: para #: hardware.xml:1897 #, no-c-format -msgid "Both SCSI and IDE/ATAPI CD-ROMs are supported. In addition, all non-standard CD interfaces supported by Linux are supported by the boot disks (such as Mitsumi and Matsushita drives). However, these models might require special boot parameters or other massaging to get them to work, and booting off these non-standard interfaces is unlikely. The Linux CD-ROM HOWTO contains in-depth information on using CD-ROMs with Linux." +msgid "" +"Both SCSI and IDE/ATAPI CD-ROMs are supported. In addition, all non-standard " +"CD interfaces supported by Linux are supported by the boot disks (such as " +"Mitsumi and Matsushita drives). However, these models might require special " +"boot parameters or other massaging to get them to work, and booting off " +"these non-standard interfaces is unlikely. The Linux CD-ROM HOWTO contains in-depth information on using CD-ROMs " +"with Linux." msgstr "" #. Tag: para #: hardware.xml:1907 #, no-c-format -msgid "USB CD-ROM drives are also supported, as are FireWire devices that are supported by the ohci1394 and sbp2 drivers." +msgid "" +"USB CD-ROM drives are also supported, as are FireWire devices that are " +"supported by the ohci1394 and sbp2 drivers." msgstr "" #. Tag: para #: hardware.xml:1912 #, no-c-format -msgid "Both SCSI and IDE/ATAPI CD-ROMs are supported on &arch-title;, as long as the controller is supported by the SRM console. This rules out many add-on controller cards, but most integrated IDE and SCSI chips and controller cards that were provided by the manufacturer can be expected to work. To find out whether your device is supported from the SRM console, see the SRM HOWTO." +msgid "" +"Both SCSI and IDE/ATAPI CD-ROMs are supported on &arch-title;, as long as " +"the controller is supported by the SRM console. This rules out many add-on " +"controller cards, but most integrated IDE and SCSI chips and controller " +"cards that were provided by the manufacturer can be expected to work. To " +"find out whether your device is supported from the SRM console, see the " +"SRM HOWTO." msgstr "" #. Tag: para #: hardware.xml:1921 #, no-c-format -msgid "IDE/ATAPI CD-ROMs are supported on all ARM machines. On RiscPCs, SCSI CD-ROMs are also supported." +msgid "" +"IDE/ATAPI CD-ROMs are supported on all ARM machines. On RiscPCs, SCSI CD-" +"ROMs are also supported." msgstr "" #. Tag: para #: hardware.xml:1926 #, no-c-format -msgid "On SGI machines, booting from CD-ROM requires a SCSI CD-ROM drive capable of working with a logical blocksize of 512 bytes. Many of the SCSI CD-ROM drives sold on the PC market do not have this capability. If your CD-ROM drive has a jumper labeled Unix/PC or 512/2048, place it in the Unix or 512 position. To start the install, simply choose the System installation entry in the firmware. The Broadcom BCM91250A supports standard IDE devices, including CD-ROM drives, but CD images for this platform are currently not provided because the firmware doesn't recognize CD drives. In order to install Debian on an Broadcom BCM91480B evaluation board, you need an PCI IDE, SATA or SCSI card." +msgid "" +"On SGI machines, booting from CD-ROM requires a SCSI CD-ROM drive capable of " +"working with a logical blocksize of 512 bytes. Many of the SCSI CD-ROM " +"drives sold on the PC market do not have this capability. If your CD-ROM " +"drive has a jumper labeled Unix/PC or 512/2048, place it in the Unix or 512 position. " +"To start the install, simply choose the System installation " +"entry in the firmware. The Broadcom BCM91250A supports standard IDE devices, " +"including CD-ROM drives, but CD images for this platform are currently not " +"provided because the firmware doesn't recognize CD drives. In order to " +"install Debian on an Broadcom BCM91480B evaluation board, you need an PCI " +"IDE, SATA or SCSI card." msgstr "" #. Tag: para #: hardware.xml:1941 #, no-c-format -msgid "On DECstations, booting from CD-ROM requires a SCSI CD-ROM drive capable of working with a logical blocksize of 512 bytes. Many of the SCSI CD-ROM drives sold on the PC market do not have this capability. If your CD-ROM drive has a jumper labeled Unix/PC or 512/2048, place it in the Unix or 512 position." +msgid "" +"On DECstations, booting from CD-ROM requires a SCSI CD-ROM drive capable of " +"working with a logical blocksize of 512 bytes. Many of the SCSI CD-ROM " +"drives sold on the PC market do not have this capability. If your CD-ROM " +"drive has a jumper labeled Unix/PC or 512/2048, place it in the Unix or 512 position." msgstr "" #. Tag: para #: hardware.xml:1950 #, no-c-format -msgid "CD 1 contains the installer for the r3k-kn02 subarchitecture (the R3000-based DECstations 5000/1xx and 5000/240 as well as the R3000-based Personal DECstation models), CD 2 the installer for the r4k-kn04 subarchitecture (the R4x00-based DECstations 5000/150 and 5000/260 as well as the Personal DECstation 5000/50)." +msgid "" +"CD 1 contains the installer for the r3k-kn02 subarchitecture (the R3000-" +"based DECstations 5000/1xx and 5000/240 as well as the R3000-based Personal " +"DECstation models), CD 2 the installer for the r4k-kn04 subarchitecture (the " +"R4x00-based DECstations 5000/150 and 5000/260 as well as the Personal " +"DECstation 5000/50)." msgstr "" #. Tag: para #: hardware.xml:1959 #, no-c-format -msgid "To boot from CD, issue the command boot #/rzid on the firmware prompt, where # is the number of the TurboChannel device from which to boot (3 on most DECstations) and id is the SCSI ID of the CD-ROM drive. If you need to pass additional parameters, they can optionally be appended with the following syntax:" +msgid "" +"To boot from CD, issue the command boot #/rzid on the firmware " +"prompt, where # is the number of the TurboChannel " +"device from which to boot (3 on most DECstations) and id is the SCSI ID of the CD-ROM drive. If you need to pass " +"additional parameters, they can optionally be appended with the following " +"syntax:" msgstr "" #. Tag: userinput #: hardware.xml:1971 #, no-c-format -msgid "boot #/rzid param1=value1 param2=value2 ..." +msgid "" +"boot #/rzid " +"param1=value1 param2=value2 ..." msgstr "" #. Tag: title @@ -2897,19 +3282,26 @@ msgstr "" #. Tag: para #: hardware.xml:1980 #, no-c-format -msgid "Booting the installation system directly from a hard disk is another option for many architectures. This will require some other operating system to load the installer onto the hard disk." +msgid "" +"Booting the installation system directly from a hard disk is another option " +"for many architectures. This will require some other operating system to " +"load the installer onto the hard disk." msgstr "" #. Tag: para #: hardware.xml:1986 #, no-c-format -msgid "In fact, installation from your local disk is the preferred installation technique for most &architecture; machines." +msgid "" +"In fact, installation from your local disk is the preferred installation " +"technique for most &architecture; machines." msgstr "" #. Tag: para #: hardware.xml:1991 #, no-c-format -msgid "Although the &arch-title; does not allow booting from SunOS (Solaris), you can install from a SunOS partition (UFS slices)." +msgid "" +"Although the &arch-title; does not allow booting from SunOS (Solaris), you " +"can install from a SunOS partition (UFS slices)." msgstr "" #. Tag: title @@ -2921,7 +3313,13 @@ msgstr "" #. Tag: para #: hardware.xml:2001 #, no-c-format -msgid "Many Debian boxes need their floppy and/or CD-ROM drives only for setting up the system and for rescue purposes. If you operate some servers, you will probably already have thought about omitting those drives and using an USB memory stick for installing and (when necessary) for recovering the system. This is also useful for small systems which have no room for unnecessary drives." +msgid "" +"Many Debian boxes need their floppy and/or CD-ROM drives only for setting up " +"the system and for rescue purposes. If you operate some servers, you will " +"probably already have thought about omitting those drives and using an USB " +"memory stick for installing and (when necessary) for recovering the system. " +"This is also useful for small systems which have no room for unnecessary " +"drives." msgstr "" #. Tag: title @@ -2933,19 +3331,26 @@ msgstr "" #. Tag: para #: hardware.xml:2015 #, no-c-format -msgid "You can also boot your system over the network. This is the preferred installation technique for Mips." +msgid "" +"You can also boot your system over the network. This is the preferred installation technique for Mips." msgstr "" #. Tag: para #: hardware.xml:2021 #, no-c-format -msgid "Diskless installation, using network booting from a local area network and NFS-mounting of all local filesystems, is another option." +msgid "" +"Diskless installation, using network booting from a local area network and " +"NFS-mounting of all local filesystems, is another option." msgstr "" #. Tag: para #: hardware.xml:2026 #, no-c-format -msgid "After the operating system kernel is installed, you can install the rest of your system via any sort of network connection (including PPP after installation of the base system), via FTP or HTTP." +msgid "" +"After the operating system kernel is installed, you can install the rest of " +"your system via any sort of network connection (including PPP after " +"installation of the base system), via FTP or HTTP." msgstr "" #. Tag: title @@ -2957,7 +3362,12 @@ msgstr "" #. Tag: para #: hardware.xml:2037 #, no-c-format -msgid "If you are running another Unix-like system, you could use it to install &debian; without using the &d-i; described in the rest of the manual. This kind of install may be useful for users with otherwise unsupported hardware or on hosts which can't afford downtime. If you are interested in this technique, skip to the ." +msgid "" +"If you are running another Unix-like system, you could use it to install " +"&debian; without using the &d-i; described in the rest of the manual. This " +"kind of install may be useful for users with otherwise unsupported hardware " +"or on hosts which can't afford downtime. If you are interested in this " +"technique, skip to the ." msgstr "" #. Tag: title @@ -2969,61 +3379,108 @@ msgstr "" #. Tag: para #: hardware.xml:2051 #, no-c-format -msgid "The Debian boot disks contain a kernel which is built to maximize the number of systems it runs on. Unfortunately, this makes for a larger kernel, which includes many drivers that won't be used for your machine (see to learn how to build your own kernel). Support for the widest possible range of devices is desirable in general, to ensure that Debian can be installed on the widest array of hardware." +msgid "" +"The Debian boot disks contain a kernel which is built to maximize the number " +"of systems it runs on. Unfortunately, this makes for a larger kernel, which " +"includes many drivers that won't be used for your machine (see to learn how to build your own kernel). Support for the " +"widest possible range of devices is desirable in general, to ensure that " +"Debian can be installed on the widest array of hardware." msgstr "" #. Tag: para #: hardware.xml:2061 #, no-c-format -msgid "Generally, the Debian installation system includes support for floppies, IDE drives, IDE floppies, parallel port IDE devices, SCSI controllers and drives, USB, and FireWire. The supported file systems include FAT, Win-32 FAT extensions (VFAT) and NTFS." +msgid "" +"Generally, the Debian installation system includes support for floppies, IDE " +"drives, IDE floppies, parallel port IDE devices, SCSI controllers and " +"drives, USB, and FireWire. The supported file systems include FAT, Win-32 " +"FAT extensions (VFAT) and NTFS." msgstr "" #. Tag: para #: hardware.xml:2068 #, no-c-format -msgid "Disk interfaces that emulate the AT hard disk interface — often called MFM, RLL, IDE, or ATA — are supported. Very old 8–bit hard disk controllers used in the IBM XT computer are supported only as a module. SCSI disk controllers from many different manufacturers are supported. See the Linux Hardware Compatibility HOWTO for more details." +msgid "" +"Disk interfaces that emulate the AT hard disk interface " +"— often called MFM, RLL, IDE, or ATA — are supported. Very old " +"8–bit hard disk controllers used in the IBM XT computer are supported " +"only as a module. SCSI disk controllers from many different manufacturers " +"are supported. See the Linux Hardware " +"Compatibility HOWTO for more details." msgstr "" #. Tag: para #: hardware.xml:2078 #, no-c-format -msgid "Pretty much all storage systems supported by the Linux kernel are supported by the Debian installation system. Note that the current Linux kernel does not support floppies on the Macintosh at all, and the Debian installation system doesn't support floppies for Amigas. Also supported on the Atari is the Macintosh HFS system, and AFFS as a module. Macs support the Atari (FAT) file system. Amigas support the FAT file system, and HFS as a module." +msgid "" +"Pretty much all storage systems supported by the Linux kernel are supported " +"by the Debian installation system. Note that the current Linux kernel does " +"not support floppies on the Macintosh at all, and the Debian installation " +"system doesn't support floppies for Amigas. Also supported on the Atari is " +"the Macintosh HFS system, and AFFS as a module. Macs support the Atari (FAT) " +"file system. Amigas support the FAT file system, and HFS as a module." msgstr "" #. Tag: para #: hardware.xml:2088 #, no-c-format -msgid "Any storage system supported by the Linux kernel is also supported by the boot system. The following SCSI drivers are supported in the default kernel: Sparc ESP PTI Qlogic,ISP Adaptec AIC7xxx NCR and Symbios 53C8XX IDE systems (such as the UltraSPARC 5) are also supported. See Linux for SPARC Processors FAQ for more information on SPARC hardware supported by the Linux kernel." +msgid "" +"Any storage system supported by the Linux kernel is also supported by the " +"boot system. The following SCSI drivers are supported in the default kernel: " +" Sparc ESP " +" PTI Qlogic,ISP Adaptec " +"AIC7xxx NCR and Symbios 53C8XX IDE systems (such as the UltraSPARC 5) are also " +"supported. See Linux for SPARC " +"Processors FAQ for more information on SPARC hardware supported by " +"the Linux kernel." msgstr "" #. Tag: para #: hardware.xml:2121 #, no-c-format -msgid "Any storage system supported by the Linux kernel is also supported by the boot system. This includes both SCSI and IDE disks. Note, however, that on many systems, the SRM console is unable to boot from IDE drives, and the Jensen is unable to boot from floppies. (see for more information on booting the Jensen)" +msgid "" +"Any storage system supported by the Linux kernel is also supported by the " +"boot system. This includes both SCSI and IDE disks. Note, however, that on " +"many systems, the SRM console is unable to boot from IDE drives, and the " +"Jensen is unable to boot from floppies. (see for more information on booting the Jensen)" msgstr "" #. Tag: para #: hardware.xml:2130 #, no-c-format -msgid "Any storage system supported by the Linux kernel is also supported by the boot system. Note that the current Linux kernel does not support floppies on CHRP systems at all." +msgid "" +"Any storage system supported by the Linux kernel is also supported by the " +"boot system. Note that the current Linux kernel does not support floppies on " +"CHRP systems at all." msgstr "" #. Tag: para #: hardware.xml:2136 #, no-c-format -msgid "Any storage system supported by the Linux kernel is also supported by the boot system. Note that the current Linux kernel does not support the floppy drive." +msgid "" +"Any storage system supported by the Linux kernel is also supported by the " +"boot system. Note that the current Linux kernel does not support the floppy " +"drive." msgstr "" #. Tag: para #: hardware.xml:2142 #, no-c-format -msgid "Any storage system supported by the Linux kernel is also supported by the boot system." +msgid "" +"Any storage system supported by the Linux kernel is also supported by the " +"boot system." msgstr "" #. Tag: para #: hardware.xml:2147 #, no-c-format -msgid "Any storage system supported by the Linux kernel is also supported by the boot system. This means that FBA and ECKD DASDs are supported with the old Linux disk layout (ldl) and the new common S/390 disk layout (cdl)." +msgid "" +"Any storage system supported by the Linux kernel is also supported by the " +"boot system. This means that FBA and ECKD DASDs are supported with the old " +"Linux disk layout (ldl) and the new common S/390 disk layout (cdl)." msgstr "" #. Tag: title @@ -3035,37 +3492,55 @@ msgstr "" #. Tag: para #: hardware.xml:2165 #, no-c-format -msgid "Linux supports a large variety of hardware devices such as mice, printers, scanners, PCMCIA and USB devices. However, most of these devices are not required while installing the system." +msgid "" +"Linux supports a large variety of hardware devices such as mice, printers, " +"scanners, PCMCIA and USB devices. However, most of these devices are not " +"required while installing the system." msgstr "" #. Tag: para #: hardware.xml:2171 #, no-c-format -msgid "USB hardware generally works fine, only some USB keyboards may require additional configuration (see )." +msgid "" +"USB hardware generally works fine, only some USB keyboards may require " +"additional configuration (see )." msgstr "" #. Tag: para #: hardware.xml:2177 #, no-c-format -msgid "Again, see the Linux Hardware Compatibility HOWTO to determine whether your specific hardware is supported by Linux." +msgid "" +"Again, see the Linux Hardware " +"Compatibility HOWTO to determine whether your specific hardware is " +"supported by Linux." msgstr "" #. Tag: para #: hardware.xml:2183 #, no-c-format -msgid "Package installations from XPRAM and tape are not supported by this system. All packages that you want to install need to be available on a DASD or over the network using NFS, HTTP or FTP." +msgid "" +"Package installations from XPRAM and tape are not supported by this system. " +"All packages that you want to install need to be available on a DASD or over " +"the network using NFS, HTTP or FTP." msgstr "" #. Tag: para #: hardware.xml:2189 #, no-c-format -msgid "The Broadcom BCM91250A evaluation board offers standard 3.3v 32 bit and 64 bit PCI slots as well as USB connectors. The Broadcom BCM91480B evaluation board features four 64 bit PCI slots." +msgid "" +"The Broadcom BCM91250A evaluation board offers standard 3.3v 32 bit and 64 " +"bit PCI slots as well as USB connectors. The Broadcom BCM91480B evaluation " +"board features four 64 bit PCI slots." msgstr "" #. Tag: para #: hardware.xml:2195 #, no-c-format -msgid "The Broadcom BCM91250A evaluation board offers standard 3.3v 32 bit and 64 bit PCI slots as well as USB connectors. The Broadcom BCM91480B evaluation board features four 64 bit PCI slots. The Cobalt RaQ has no support for additional devices but the Qube has one PCI slot." +msgid "" +"The Broadcom BCM91250A evaluation board offers standard 3.3v 32 bit and 64 " +"bit PCI slots as well as USB connectors. The Broadcom BCM91480B evaluation " +"board features four 64 bit PCI slots. The Cobalt RaQ has no support for " +"additional devices but the Qube has one PCI slot." msgstr "" #. Tag: title @@ -3077,25 +3552,42 @@ msgstr "" #. Tag: para #: hardware.xml:2207 #, no-c-format -msgid "There are several vendors, who ship systems with Debian or other distributions of GNU/Linux pre-installed. You might pay more for the privilege, but it does buy a level of peace of mind, since you can be sure that the hardware is well-supported by GNU/Linux." +msgid "" +"There are several vendors, who ship systems with Debian or other " +"distributions of GNU/Linux pre-installed. You might pay more for the privilege, but it does buy a level of " +"peace of mind, since you can be sure that the hardware is well-supported by " +"GNU/Linux." msgstr "" #. Tag: para #: hardware.xml:2215 #, no-c-format -msgid "Unfortunately, it's quite rare to find any vendor shipping new &arch-title; machines at all." +msgid "" +"Unfortunately, it's quite rare to find any vendor shipping new &arch-title; " +"machines at all." msgstr "" #. Tag: para #: hardware.xml:2220 #, no-c-format -msgid "If you do have to buy a machine with Windows bundled, carefully read the software license that comes with Windows; you may be able to reject the license and obtain a rebate from your vendor. Searching the Internet for windows refund may get you some useful information to help with that." +msgid "" +"If you do have to buy a machine with Windows bundled, carefully read the " +"software license that comes with Windows; you may be able to reject the " +"license and obtain a rebate from your vendor. Searching the Internet for " +"windows refund may get you some useful information to help " +"with that." msgstr "" #. Tag: para #: hardware.xml:2228 #, no-c-format -msgid "Whether or not you are purchasing a system with Linux bundled, or even a used system, it is still important to check that your hardware is supported by the Linux kernel. Check if your hardware is listed in the references found above. Let your salesperson (if any) know that you're shopping for a Linux system. Support Linux-friendly hardware vendors." +msgid "" +"Whether or not you are purchasing a system with Linux bundled, or even a " +"used system, it is still important to check that your hardware is supported " +"by the Linux kernel. Check if your hardware is listed in the references " +"found above. Let your salesperson (if any) know that you're shopping for a " +"Linux system. Support Linux-friendly hardware vendors." msgstr "" #. Tag: title @@ -3107,19 +3599,34 @@ msgstr "" #. Tag: para #: hardware.xml:2240 #, no-c-format -msgid "Some hardware manufacturers simply won't tell us how to write drivers for their hardware. Others won't allow us access to the documentation without a non-disclosure agreement that would prevent us from releasing the Linux source code." +msgid "" +"Some hardware manufacturers simply won't tell us how to write drivers for " +"their hardware. Others won't allow us access to the documentation without a " +"non-disclosure agreement that would prevent us from releasing the Linux " +"source code." msgstr "" #. Tag: para #: hardware.xml:2247 #, no-c-format -msgid "Another example is the proprietary hardware in the older Macintosh line. In fact, no specifications or documentation have ever been released for any Macintosh hardware, most notably the ADB controller (used by the mouse and keyboard), the floppy controller, and all acceleration and CLUT manipulation of the video hardware (though we do now support CLUT manipulation on nearly all internal video chips). In a nutshell, this explains why the Macintosh Linux port lags behind other Linux ports." +msgid "" +"Another example is the proprietary hardware in the older Macintosh line. In " +"fact, no specifications or documentation have ever been released for any " +"Macintosh hardware, most notably the ADB controller (used by the mouse and " +"keyboard), the floppy controller, and all acceleration and CLUT manipulation " +"of the video hardware (though we do now support CLUT manipulation on nearly " +"all internal video chips). In a nutshell, this explains why the Macintosh " +"Linux port lags behind other Linux ports." msgstr "" #. Tag: para #: hardware.xml:2258 #, no-c-format -msgid "Since we haven't been granted access to the documentation on these devices, they simply won't work under Linux. You can help by asking the manufacturers of such hardware to release the documentation. If enough people ask, they will realize that the free software community is an important market." +msgid "" +"Since we haven't been granted access to the documentation on these devices, " +"they simply won't work under Linux. You can help by asking the manufacturers " +"of such hardware to release the documentation. If enough people ask, they " +"will realize that the free software community is an important market." msgstr "" #. Tag: title @@ -3131,19 +3638,50 @@ msgstr "" #. Tag: para #: hardware.xml:2271 #, no-c-format -msgid "A disturbing trend is the proliferation of Windows-specific modems and printers. In some cases these are specially designed to be operated by the Microsoft Windows operating system and bear the legend WinModem or Made especially for Windows-based computers. This is generally done by removing the embedded processors of the hardware and shifting the work they do over to a Windows driver that is run by your computer's main CPU. This strategy makes the hardware less expensive, but the savings are often not passed on to the user and this hardware may even be more expensive than equivalent devices that retain their embedded intelligence." +msgid "" +"A disturbing trend is the proliferation of Windows-specific modems and " +"printers. In some cases these are specially designed to be operated by the " +"Microsoft Windows operating system and bear the legend WinModem or Made especially for Windows-based computers. This " +"is generally done by removing the embedded processors of the hardware and " +"shifting the work they do over to a Windows driver that is run by your " +"computer's main CPU. This strategy makes the hardware less expensive, but " +"the savings are often not passed on to the user and " +"this hardware may even be more expensive than equivalent devices that retain " +"their embedded intelligence." msgstr "" #. Tag: para #: hardware.xml:2284 #, no-c-format -msgid "You should avoid Windows-specific hardware for two reasons. The first is that the manufacturers do not generally make the resources available to write a Linux driver. Generally, the hardware and software interface to the device is proprietary, and documentation is not available without a non-disclosure agreement, if it is available at all. This precludes its being used for free software, since free software writers disclose the source code of their programs. The second reason is that when devices like these have had their embedded processors removed, the operating system must perform the work of the embedded processors, often at real-time priority, and thus the CPU is not available to run your programs while it is driving these devices. Since the typical Windows user does not multi-process as intensively as a Linux user, the manufacturers hope that the Windows user simply won't notice the burden this hardware places on their CPU. However, any multi-processing operating system, even Windows 2000 or XP, suffers from degraded performance when peripheral manufacturers skimp on the embedded processing power of their hardware." +msgid "" +"You should avoid Windows-specific hardware for two reasons. The first is " +"that the manufacturers do not generally make the resources available to " +"write a Linux driver. Generally, the hardware and software interface to the " +"device is proprietary, and documentation is not available without a non-" +"disclosure agreement, if it is available at all. This precludes its being " +"used for free software, since free software writers disclose the source code " +"of their programs. The second reason is that when devices like these have " +"had their embedded processors removed, the operating system must perform the " +"work of the embedded processors, often at real-time " +"priority, and thus the CPU is not available to run your programs while it is " +"driving these devices. Since the typical Windows user does not multi-process " +"as intensively as a Linux user, the manufacturers hope that the Windows user " +"simply won't notice the burden this hardware places on their CPU. However, " +"any multi-processing operating system, even Windows 2000 or XP, suffers from " +"degraded performance when peripheral manufacturers skimp on the embedded " +"processing power of their hardware." msgstr "" #. Tag: para #: hardware.xml:2305 #, no-c-format -msgid "You can help improve this situation by encouraging these manufacturers to release the documentation and other resources necessary for us to program their hardware, but the best strategy is simply to avoid this sort of hardware until it is listed as working in the Linux Hardware Compatibility HOWTO." +msgid "" +"You can help improve this situation by encouraging these manufacturers to " +"release the documentation and other resources necessary for us to program " +"their hardware, but the best strategy is simply to avoid this sort of " +"hardware until it is listed as working in the Linux Hardware Compatibility HOWTO." msgstr "" #. Tag: title @@ -3155,13 +3693,27 @@ msgstr "" #. Tag: para #: hardware.xml:2319 #, no-c-format -msgid "If you ask for Parity RAM in a computer store, you'll probably get virtual parity memory modules instead of true parity ones. Virtual parity SIMMs can often (but not always) be distinguished because they only have one more chip than an equivalent non-parity SIMM, and that one extra chip is smaller than all the others. Virtual-parity SIMMs work exactly like non-parity memory. They can't tell you when you have a single-bit RAM error the way true-parity SIMMs do in a motherboard that implements parity. Don't ever pay more for a virtual-parity SIMM than a non-parity one. Do expect to pay a little more for true-parity SIMMs, because you are actually buying one extra bit of memory for every 8 bits." +msgid "" +"If you ask for Parity RAM in a computer store, you'll probably get " +"virtual parity memory modules instead of true " +"parity ones. Virtual parity SIMMs can often (but not always) be " +"distinguished because they only have one more chip than an equivalent non-" +"parity SIMM, and that one extra chip is smaller than all the others. Virtual-" +"parity SIMMs work exactly like non-parity memory. They can't tell you when " +"you have a single-bit RAM error the way true-parity SIMMs do in a " +"motherboard that implements parity. Don't ever pay more for a virtual-parity " +"SIMM than a non-parity one. Do expect to pay a little more for true-parity " +"SIMMs, because you are actually buying one extra bit of memory for every 8 " +"bits." msgstr "" #. Tag: para #: hardware.xml:2334 #, no-c-format -msgid "If you want complete information on &arch-title; RAM issues, and what is the best RAM to buy, see the PC Hardware FAQ." +msgid "" +"If you want complete information on &arch-title; RAM issues, and what is the " +"best RAM to buy, see the PC Hardware FAQ." msgstr "" #. Tag: para @@ -3179,25 +3731,44 @@ msgstr "" #. Tag: para #: hardware.xml:2357 #, no-c-format -msgid "You must have at least &minimum-memory; of memory and &minimum-fs-size; of hard disk space. For a minimal console-based system (all standard packages), 250MB is required. If you want to install a reasonable amount of software, including the X Window System, and some development programs and libraries, you'll need at least 400MB. For a more or less complete desktop system, you'll need a few gigabytes." +msgid "" +"You must have at least &minimum-memory; of memory and &minimum-fs-size; of " +"hard disk space. For a minimal console-based system (all standard packages), " +"250MB is required. If you want to install a reasonable amount of software, " +"including the X Window System, and some development programs and libraries, " +"you'll need at least 400MB. For a more or less complete desktop system, " +"you'll need a few gigabytes." msgstr "" #. Tag: para #: hardware.xml:2366 #, no-c-format -msgid "On the Amiga the size of FastRAM is relevant towards the total memory requirements. Also, using Zorro cards with 16-bit RAM is not supported; you'll need 32-bit RAM. The amiboot program can be used to disable 16-bit RAM; see the Linux/m68k FAQ. Recent kernels should disable 16-bit RAM automatically." +msgid "" +"On the Amiga the size of FastRAM is relevant towards the total memory " +"requirements. Also, using Zorro cards with 16-bit RAM is not supported; " +"you'll need 32-bit RAM. The amiboot program can be used " +"to disable 16-bit RAM; see the Linux/m68k FAQ. Recent kernels should disable 16-bit RAM automatically." msgstr "" #. Tag: para #: hardware.xml:2375 #, no-c-format -msgid "On the Atari, both ST-RAM and Fast RAM (TT-RAM) are used by Linux. Many users have reported problems running the kernel itself in Fast RAM, so the Atari bootstrap will place the kernel in ST-RAM. The minimum requirement for ST-RAM is 2 MB. You will need an additional 12 MB or more of TT-RAM." +msgid "" +"On the Atari, both ST-RAM and Fast RAM (TT-RAM) are used by Linux. Many " +"users have reported problems running the kernel itself in Fast RAM, so the " +"Atari bootstrap will place the kernel in ST-RAM. The minimum requirement for " +"ST-RAM is 2 MB. You will need an additional 12 MB or more of TT-RAM." msgstr "" #. Tag: para #: hardware.xml:2383 #, no-c-format -msgid "On the Macintosh, care should be taken on machines with RAM-based video (RBV). The RAM segment at physical address 0 is used as screen memory, making the default load position for the kernel unavailable. The alternate RAM segment used for kernel and RAMdisk must be at least 4 MB." +msgid "" +"On the Macintosh, care should be taken on machines with RAM-based video " +"(RBV). The RAM segment at physical address 0 is used as screen memory, " +"making the default load position for the kernel unavailable. The alternate " +"RAM segment used for kernel and RAMdisk must be at least 4 MB." msgstr "" #. Tag: emphasis @@ -3215,25 +3786,41 @@ msgstr "" #. Tag: para #: hardware.xml:2406 #, no-c-format -msgid "Most PCI and many older ISA network cards are supported. Some network interface cards are not supported by most Debian installation disks, such as AX.25 cards and protocols; NI16510 EtherBlaster cards; Schneider & Koch G16 cards; and the Zenith Z-Note built-in network card. Microchannel (MCA) network cards are not supported by the standard installation system, but see Linux on MCA for some (old) instructions. FDDI networks are also not supported by the installation disks, both cards and protocols." +msgid "" +"Most PCI and many older ISA network cards are supported. Some network " +"interface cards are not supported by most Debian installation disks, such as " +"AX.25 cards and protocols; NI16510 EtherBlaster cards; Schneider & Koch " +"G16 cards; and the Zenith Z-Note built-in network card. Microchannel (MCA) " +"network cards are not supported by the standard installation system, but see " +"Linux on MCA for some (old) " +"instructions. FDDI networks are also not supported by the installation " +"disks, both cards and protocols." msgstr "" #. Tag: para #: hardware.xml:2425 #, no-c-format -msgid "As for ISDN, the D-channel protocol for the (old) German 1TR6 is not supported; Spellcaster BRI ISDN boards are also not supported by the &d-i;." +msgid "" +"As for ISDN, the D-channel protocol for the (old) German 1TR6 is not " +"supported; Spellcaster BRI ISDN boards are also not supported by the &d-i;." msgstr "" #. Tag: para #: hardware.xml:2433 #, no-c-format -msgid "Any network interface card (NIC) supported by the Linux kernel should also be supported by the boot disks. You may need to load your network driver as a module. Again, see for complete details." +msgid "" +"Any network interface card (NIC) supported by the Linux kernel should also " +"be supported by the boot disks. You may need to load your network driver as " +"a module. Again, see for complete " +"details." msgstr "" #. Tag: para #: hardware.xml:2442 #, no-c-format -msgid "The following network interface cards (NICs) are supported from the bootable kernel directly:" +msgid "" +"The following network interface cards (NICs) are supported from the bootable " +"kernel directly:" msgstr "" #. Tag: para @@ -3251,7 +3838,10 @@ msgstr "" #. Tag: para #: hardware.xml:2462 #, no-c-format -msgid "The following network interface cards are supported as modules. They can be enabled once the drivers are installed during the setup. However, due to the magic of OpenPROM, you still should be able to boot from these devices:" +msgid "" +"The following network interface cards are supported as modules. They can be " +"enabled once the drivers are installed during the setup. However, due to the " +"magic of OpenPROM, you still should be able to boot from these devices:" msgstr "" #. Tag: para @@ -3273,25 +3863,31 @@ msgid "MyriCOM Gigabit Ethernet" msgstr "" #. Tag: para -#: hardware.xml:2488 -#: hardware.xml:2494 -#: hardware.xml:2500 -#: hardware.xml:2506 +#: hardware.xml:2488 hardware.xml:2494 hardware.xml:2500 hardware.xml:2506 #: hardware.xml:2512 #, no-c-format -msgid "Any network interface card (NIC) supported by the Linux kernel should also be supported by the boot disks. You may need to load your network driver as a module." +msgid "" +"Any network interface card (NIC) supported by the Linux kernel should also " +"be supported by the boot disks. You may need to load your network driver as " +"a module." msgstr "" #. Tag: para #: hardware.xml:2518 #, no-c-format -msgid "Due to kernel limitations only the onboard network interfaces on DECstations are supported, TurboChannel option network cards currently do not work." +msgid "" +"Due to kernel limitations only the onboard network interfaces on DECstations " +"are supported, TurboChannel option network cards currently do not work." msgstr "" #. Tag: para #: hardware.xml:2524 #, no-c-format -msgid "Any network interface card (NIC) supported by the Linux kernel is also be supported by the boot disks. All network drivers are compiled as modules so you need to load one first during the initial network setup. The list of supported network devices is:" +msgid "" +"Any network interface card (NIC) supported by the Linux kernel is also be " +"supported by the boot disks. All network drivers are compiled as modules so " +"you need to load one first during the initial network setup. The list of " +"supported network devices is:" msgstr "" #. Tag: para @@ -3309,7 +3905,8 @@ msgstr "" #. Tag: para #: hardware.xml:2542 #, no-c-format -msgid "Inter-User Communication Vehicle (IUCV) — available for VM guests only" +msgid "" +"Inter-User Communication Vehicle (IUCV) — available for VM guests only" msgstr "" #. Tag: para @@ -3321,7 +3918,9 @@ msgstr "" #. Tag: para #: hardware.xml:2556 #, no-c-format -msgid "The following network interface cards are supported directly by the boot disks on Netwinder and CATS machines:" +msgid "" +"The following network interface cards are supported directly by the boot " +"disks on Netwinder and CATS machines:" msgstr "" #. Tag: para @@ -3339,7 +3938,9 @@ msgstr "" #. Tag: para #: hardware.xml:2575 #, no-c-format -msgid "The following network interface cards are supported directly by the boot disks on RiscPCs:" +msgid "" +"The following network interface cards are supported directly by the boot " +"disks on RiscPCs:" msgstr "" #. Tag: para @@ -3363,12 +3964,17 @@ msgstr "" #. Tag: para #: hardware.xml:2598 #, no-c-format -msgid "If your card is mentioned in the lists above, the complete installation can be carried out from the network with no need for CD-ROMs or floppy disks." +msgid "" +"If your card is mentioned in the lists above, the complete installation can " +"be carried out from the network with no need for CD-ROMs or floppy disks." msgstr "" #. Tag: para #: hardware.xml:2604 #, no-c-format -msgid "Any other network interface card (NIC) supported by the Linux kernel should also be supported by the boot disks. You may need to load your network driver as a module; this means that you will have to install the operating system kernel and modules using some other media." +msgid "" +"Any other network interface card (NIC) supported by the Linux kernel should " +"also be supported by the boot disks. You may need to load your network " +"driver as a module; this means that you will have to install the operating " +"system kernel and modules using some other media." msgstr "" - diff --git a/po/hu/post-install.po b/po/hu/post-install.po index 1545a94be..9ace9c6de 100644 --- a/po/hu/post-install.po +++ b/po/hu/post-install.po @@ -1,12 +1,13 @@ msgid "" msgstr "" "Project-Id-Version: \n" -"POT-Creation-Date: \n" +"Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n" +"POT-Creation-Date: 2006-08-18 17:32+0000\n" "PO-Revision-Date: 2006-08-20 11:59+0100\n" "Last-Translator: SZERVÁC Attila \n" "Language-Team: hu\n" "MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=utf-8\n" +"Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Poedit-Language: Hungarian\n" @@ -27,14 +28,42 @@ msgstr "A rendszer leállítása" #. Tag: para #: post-install.xml:15 #, no-c-format -msgid "To shut down a running Linux system, you must not reboot with the reset switch on the front or back of your computer, or just turn off the computer. Linux should be shut down in a controlled manner, otherwise files might get lost and/or disk damage might occur. If you run a desktop environment, there is usually an option to log out available from the application menu that allows you to shutdown (or reboot) the system." -msgstr "Egy futó GNU/Linux rendszer leállításánál szerencsére mellőzhető a gép durva, azonnali áramtalanítása az újraindító vagy kapcsoló gombbal, irányított módon tesszük ezt, így a fájlok vagy a lemez nem sérülhet. Amikor egy asztali környezetet futtatsz, általában megleled a kijelentkezés pontot a környezet menüjében, mellyel leállíthatod (vagy újraindíthatod) a rendszert." +msgid "" +"To shut down a running Linux system, you must not reboot with the reset " +"switch on the front or back of your computer, or just turn off the computer. " +"Linux should be shut down in a controlled manner, otherwise files might get " +"lost and/or disk damage might occur. If you run a desktop environment, there " +"is usually an option to log out available from the " +"application menu that allows you to shutdown (or reboot) the system." +msgstr "" +"Egy futó GNU/Linux rendszer leállításánál szerencsére mellőzhető a gép " +"durva, azonnali áramtalanítása az újraindító vagy kapcsoló gombbal, " +"irányított módon tesszük ezt, így a fájlok vagy a lemez nem sérülhet. Amikor " +"egy asztali környezetet futtatsz, általában megleled a kijelentkezés pontot a környezet menüjében, mellyel leállíthatod (vagy " +"újraindíthatod) a rendszert." #. Tag: para #: post-install.xml:25 #, no-c-format -msgid "Alternatively you can press the key combination Ctrl Alt Del or Control Shift Power on Macintosh systems. A last option is to log in as root and type one of the commands poweroff, halt or shutdown -h now if either of the key combinations do not work or you prefer to type commands; use reboot to reboot the system." -msgstr "Más esetben legtöbbször használhatod a Ctrl Alt Del vagy Macintosh rendszereken Control Shift Power billentyűket. Végül rendszergazdaként használhatod a poweroff, halt vagy shutdown -h now parancsokat, ha a gyorsbillentyűk céljaidra nem megfelelők; a reboot parancs újraindít." +msgid "" +"Alternatively you can press the key combination Ctrl Alt Del or Control Shift Power on Macintosh systems. A " +"last option is to log in as root and type one of the commands " +"poweroff, halt or shutdown -h " +"now if either of the key combinations do not work or you prefer to " +"type commands; use reboot to reboot the system." +msgstr "" +"Más esetben legtöbbször használhatod a Ctrl " +"Alt Del vagy Macintosh rendszereken Control " +"Shift Power " +"billentyűket. Végül rendszergazdaként használhatod a poweroff, halt vagy shutdown -h now " +"parancsokat, ha a gyorsbillentyűk céljaidra nem megfelelők; a " +"reboot parancs újraindít." #. Tag: title #: post-install.xml:46 @@ -45,14 +74,38 @@ msgstr "Ha új vagy a Unixban" #. Tag: para #: post-install.xml:47 #, no-c-format -msgid "If you are new to Unix, you probably should go out and buy some books and do some reading. A lot of valuable information can also be found in the Debian Reference. This list of Unix FAQs contains a number of UseNet documents which provide a nice historical reference." -msgstr "Ha még nem ismered a unixos alapokat, hasznos lehet belenézni pár könyvbe. Sok nagyon hasznos információ megtalálható a Debian Reference leírásban. A Unix FAQ-lista jó néhány UseNet dokumentumra hivatkozik." +msgid "" +"If you are new to Unix, you probably should go out and buy some books and do " +"some reading. A lot of valuable information can also be found in the Debian Reference. This list of Unix FAQs contains a number of UseNet " +"documents which provide a nice historical reference." +msgstr "" +"Ha még nem ismered a unixos alapokat, hasznos lehet belenézni pár könyvbe. " +"Sok nagyon hasznos információ megtalálható a Debian Reference leírásban. A Unix FAQ-lista jó néhány UseNet dokumentumra hivatkozik." #. Tag: para #: post-install.xml:55 #, no-c-format -msgid "Linux is an implementation of Unix. The Linux Documentation Project (LDP) collects a number of HOWTOs and online books relating to Linux. Most of these documents can be installed locally; just install the doc-linux-html package (HTML versions) or the doc-linux-text package (ASCII versions), then look in /usr/share/doc/HOWTO. International versions of the LDP HOWTOs are also available as Debian packages." -msgstr "A GNU/Linux alapjaiban egy Unix-szerű rendszer. A Linux Dokumentációs Projekt (LDP) számos HOGYAN és könyv gyűjteménye. Ezek többsége a Debian rendszerben helyileg is telepíthető; egyszerűen telepítsd a doc-linux-html csomagot (HTML verzió) vagy a doc-linux-text csomagot (ASCII verzió), és megtalálod a /usr/share/doc/HOWTO könyvtárban." +msgid "" +"Linux is an implementation of Unix. The Linux " +"Documentation Project (LDP) collects a number of HOWTOs and online " +"books relating to Linux. Most of these documents can be installed locally; " +"just install the doc-linux-html package (HTML " +"versions) or the doc-linux-text package (ASCII " +"versions), then look in /usr/share/doc/HOWTO. " +"International versions of the LDP HOWTOs are also available as Debian " +"packages." +msgstr "" +"A GNU/Linux alapjaiban egy Unix-szerű rendszer. A Linux Dokumentációs Projekt (LDP) számos HOGYAN és könyv " +"gyűjteménye. Ezek többsége a Debian rendszerben helyileg is telepíthető; " +"egyszerűen telepítsd a doc-linux-html csomagot (HTML " +"verzió) vagy a doc-linux-text csomagot (ASCII " +"verzió), és megtalálod a /usr/share/doc/HOWTO " +"könyvtárban." #. Tag: title #: post-install.xml:76 @@ -63,8 +116,19 @@ msgstr "Hangolódj a Debian rendszerre" #. Tag: para #: post-install.xml:77 #, no-c-format -msgid "Debian is a little different from other distributions. Even if you're familiar with Linux in other distributions, there are things you should know about Debian to help you to keep your system in a good, clean state. This chapter contains material to help you get oriented; it is not intended to be a tutorial for how to use Debian, but just a very brief glimpse of the system for the very rushed." -msgstr "A Debian természetesen egyedi jellemzőket is tartalmaz. Valószínűleg már dolgoztál hasonló rendszerrel, de még így is van pár hasznos tudnivaló, mellyel Debian rendszeredet jól és rendben tarthatod. Ez a fejezet ezekről szól; természetesen nem egy átfogó Debian oktatóanyag, csak egy pillantás a rendszerre az esetleges legsürgősebb dolgokról." +msgid "" +"Debian is a little different from other distributions. Even if you're " +"familiar with Linux in other distributions, there are things you should know " +"about Debian to help you to keep your system in a good, clean state. This " +"chapter contains material to help you get oriented; it is not intended to be " +"a tutorial for how to use Debian, but just a very brief glimpse of the " +"system for the very rushed." +msgstr "" +"A Debian természetesen egyedi jellemzőket is tartalmaz. Valószínűleg már " +"dolgoztál hasonló rendszerrel, de még így is van pár hasznos tudnivaló, " +"mellyel Debian rendszeredet jól és rendben tarthatod. Ez a fejezet ezekről " +"szól; természetesen nem egy átfogó Debian oktatóanyag, csak egy pillantás a " +"rendszerre az esetleges legsürgősebb dolgokról." #. Tag: title #: post-install.xml:88 @@ -75,14 +139,52 @@ msgstr "A Debian csomagkezelő rendszer" #. Tag: para #: post-install.xml:89 #, no-c-format -msgid "The most important concept to grasp is the Debian packaging system. In essence, large parts of your system should be considered under the control of the packaging system. These include: /usr (excluding /usr/local) /var (you could make /var/local and be safe in there) /bin /sbin /lib For instance, if you replace /usr/bin/perl, that will work, but then if you upgrade your perl package, the file you put there will be replaced. Experts can get around this by putting packages on hold in aptitude." -msgstr "A legfontosabb, amit meg kell értenünk, a Debian csomagkezelő rendszer. A rendszer legnagyobb részét ez kezeli. Így például: /usr (kivéve /usr/local) /var (készíthető egyéni /var/local és használható mentésre) /bin /sbin /lib . Például, ha lecseréled a /usr/bin/perl fájlt, működni fog, de ha frissül a rendszereden a perl csomag, az felülírja majd. Haladó felhasználóként viszont visszafogásba (hold) teheted a csomagot például az aptitude paranccsal indítható felület segítségével." +msgid "" +"The most important concept to grasp is the Debian packaging system. In " +"essence, large parts of your system should be considered under the control " +"of the packaging system. These include: " +"/usr (excluding /usr/local) /var (you could make " +"/var/local and be safe in there) " +" /bin " +" /sbin " +" /lib For instance, if you replace /usr/bin/perl, that will work, but then if you upgrade your perl package, the file you put there will be replaced. Experts can get " +"around this by putting packages on hold in aptitude." +msgstr "" +"A legfontosabb, amit meg kell értenünk, a Debian csomagkezelő rendszer. A " +"rendszer legnagyobb részét ez kezeli. Így például: " +" /usr (kivéve /usr/local) /var " +"(készíthető egyéni /var/local és használható mentésre) " +" /bin /sbin " +" /lib . Például, ha lecseréled a /usr/bin/perl " +"fájlt, működni fog, de ha frissül a rendszereden a perl csomag, az felülírja majd. Haladó felhasználóként viszont " +"visszafogásba (hold) teheted a csomagot például az " +"aptitude paranccsal indítható felület segítségével." #. Tag: para #: post-install.xml:130 #, no-c-format -msgid "One of the best installation methods is apt. You can use the command line version apt-get or full-screen text version aptitude. Note apt will also let you merge main, contrib, and non-free so you can have export-restricted packages as well as standard versions." -msgstr "A telepítés egyik legjobb módja az apt. Ennek több felülete létezik, például az apt-get parancssoros felület, vagy az aptitude teljes-képernyős szöveges felület. Az apt a fő, vagyis main tárolók mellett a contrib és non-free nevűeket is tudja kezelni, így, ha esetleg ezeket is használnád, korlátozó csomagjaid éppúgy lesznek, mint standard verziójúak." +msgid "" +"One of the best installation methods is apt. You can use the command line " +"version apt-get or full-screen text version " +"aptitude. Note apt will also let you merge main, " +"contrib, and non-free so you can have export-restricted packages as well as " +"standard versions." +msgstr "" +"A telepítés egyik legjobb módja az apt. Ennek több felülete létezik, például " +"az apt-get parancssoros felület, vagy az " +"aptitude teljes-képernyős szöveges felület. Az " +"apt a fő, vagyis main tárolók mellett a contrib és non-free nevűeket is " +"tudja kezelni, így, ha esetleg ezeket is használnád, korlátozó csomagjaid " +"éppúgy lesznek, mint standard verziójúak." #. Tag: title #: post-install.xml:141 @@ -93,8 +195,14 @@ msgstr "Alkalmazás verzió kezelés" #. Tag: para #: post-install.xml:142 #, no-c-format -msgid "Alternative versions of applications are managed by update-alternatives. If you are maintaining multiple versions of your applications, read the update-alternatives man page." -msgstr "Az alkalmazások párhuzamos verzióit az update-alternatives kezeli. Ha egyes alkalmazásaid egyszerre több változatát is karbantartod, olvasd el az update-alternatives kézikönyv oldalát." +msgid "" +"Alternative versions of applications are managed by update-alternatives. If " +"you are maintaining multiple versions of your applications, read the update-" +"alternatives man page." +msgstr "" +"Az alkalmazások párhuzamos verzióit az update-alternatives kezeli. Ha egyes " +"alkalmazásaid egyszerre több változatát is karbantartod, olvasd el az update-" +"alternatives kézikönyv oldalát." #. Tag: title #: post-install.xml:152 @@ -105,20 +213,49 @@ msgstr "Cron feladatok kezelése" #. Tag: para #: post-install.xml:153 #, no-c-format -msgid "Any jobs under the purview of the system administrator should be in /etc, since they are configuration files. If you have a root cron job for daily, weekly, or monthly runs, put them in /etc/cron.{daily,weekly,monthly}. These are invoked from /etc/crontab, and will run in alphabetic order, which serializes them." -msgstr "Minden a rendszergazda hatáskörébe tartozó cron feladatnak a /etc könyvtárban kell lennie, mivel ezek a cron szempontjából beállítófájlok. Ha van egy napi, heti vagy havi rendszergazdai cron feladatod, tedd a /etc/cron.{daily,weekly,monthly} könyvtárba. A /etc/crontab meghívja őket, és ABC-rendben futtatja." +msgid "" +"Any jobs under the purview of the system administrator should be in " +"/etc, since they are configuration files. If you have a " +"root cron job for daily, weekly, or monthly runs, put them in /etc/" +"cron.{daily,weekly,monthly}. These are invoked from /" +"etc/crontab, and will run in alphabetic order, which serializes " +"them." +msgstr "" +"Minden a rendszergazda hatáskörébe tartozó cron feladatnak a /etc könyvtárban kell lennie, mivel ezek a cron szempontjából " +"beállítófájlok. Ha van egy napi, heti vagy havi rendszergazdai cron " +"feladatod, tedd a /etc/cron.{daily,weekly,monthly} " +"könyvtárba. A /etc/crontab meghívja őket, és ABC-" +"rendben futtatja." #. Tag: para #: post-install.xml:162 #, no-c-format -msgid "On the other hand, if you have a cron job that (a) needs to run as a special user, or (b) needs to run at a special time or frequency, you can use either /etc/crontab, or, better yet, /etc/cron.d/whatever. These particular files also have an extra field that allows you to stipulate the user under which the cron job runs." -msgstr "Illetve, ha van egy cron feladatot, amit speciális (a) felhasználóként (b) időpontban vagy gyakorisággal kell futtatnod, használd a /etc/crontab vagy, még jobb, a /etc/cron.d/amit_akarsz fájlt. E fájloknak extra mezőik vannak, melyekkel megadhatod e feltételeket." +msgid "" +"On the other hand, if you have a cron job that (a) needs to run as a special " +"user, or (b) needs to run at a special time or frequency, you can use either " +"/etc/crontab, or, better yet, /etc/cron.d/" +"whatever. These particular files also have an extra field that " +"allows you to stipulate the user under which the cron job runs." +msgstr "" +"Illetve, ha van egy cron feladatot, amit speciális (a) felhasználóként (b) " +"időpontban vagy gyakorisággal kell futtatnod, használd a /etc/" +"crontab vagy, még jobb, a /etc/cron.d/amit_akarsz fájlt. E fájloknak extra mezőik vannak, melyekkel megadhatod e " +"feltételeket." #. Tag: para #: post-install.xml:171 #, no-c-format -msgid "In either case, you just edit the files and cron will notice them automatically. There is no need to run a special command. For more information see cron(8), crontab(5), and /usr/share/doc/cron/README.Debian." -msgstr "Csak szerkeszd e fájlokat és a cron magától észreveszi. Nem kell különleges parancsot futtatnod. A további adatokat lásd a cron(8) és crontab(5) lapokon és a /usr/share/doc/cron/README.Debian fájlban." +msgid "" +"In either case, you just edit the files and cron will notice them " +"automatically. There is no need to run a special command. For more " +"information see cron(8), crontab(5), and /usr/share/doc/cron/" +"README.Debian." +msgstr "" +"Csak szerkeszd e fájlokat és a cron magától észreveszi. Nem kell különleges " +"parancsot futtatnod. A további adatokat lásd a cron(8) és crontab(5) lapokon " +"és a /usr/share/doc/cron/README.Debian fájlban." #. Tag: title #: post-install.xml:188 @@ -129,38 +266,111 @@ msgstr "Régi rendszerek és DOS vagy Windows felébresztése" #. Tag: para #: post-install.xml:189 #, no-c-format -msgid "After installing the base system and writing to the Master Boot Record, you will be able to boot Linux, but probably nothing else. This depends what you have chosen during the installation. This chapter will describe how you can reactivate your old systems so that you can also boot your DOS or Windows again." -msgstr "Az alaprendszer telepítése és az MBR módosítása után sikerrel indíthatod a Linuxot, de lehet, hogy ekkor semmi mást. Ez attól is függ, mit választottál a telepítéskor. Ez a rész leírja, hogyan tudsz felébreszteni régi rendszereket (ha voltak ilyenek és ez szükséges) sőt, így akár még egy, a telepítés előtti DOS vagy Windows is ismét indíthatóvá tehető." +msgid "" +"After installing the base system and writing to the Master Boot " +"Record, you will be able to boot Linux, but probably nothing " +"else. This depends what you have chosen during the installation. This " +"chapter will describe how you can reactivate your old systems so that you " +"can also boot your DOS or Windows again." +msgstr "" +"Az alaprendszer telepítése és az MBR módosítása után " +"sikerrel indíthatod a Linuxot, de lehet, hogy ekkor semmi mást. Ez attól is " +"függ, mit választottál a telepítéskor. Ez a rész leírja, hogyan tudsz " +"felébreszteni régi rendszereket (ha voltak ilyenek és ez szükséges) sőt, így " +"akár még egy, a telepítés előtti DOS vagy Windows is ismét indíthatóvá " +"tehető." #. Tag: para #: post-install.xml:197 #, no-c-format -msgid "LILO is a boot manager with which you can also boot other operating systems than Linux, which complies to PC conventions. The boot manager is configured via /etc/lilo.conf file. Whenever you edited this file you have to run lilo afterwards. The reason for this is that the changes will take place only when you call the program." -msgstr "A LILO egy boot betöltő, mellyel nem csak GNU/Linux, de más operációs rendszer is indítható, mely PC-ken szokásos. Ez a boot betöltő a /etc/lilo.conf fájlban állítható. A fájl minden szerkesztés után futtatni kell a lilo parancsot, mer a módosítások csak e program meghívása után kerülnek helyükre." +msgid "" +"LILO is a boot manager with which you can also boot other " +"operating systems than Linux, which complies to PC conventions. The boot " +"manager is configured via /etc/lilo.conf file. Whenever " +"you edited this file you have to run lilo afterwards. The " +"reason for this is that the changes will take place only when you call the " +"program." +msgstr "" +"A LILO egy boot betöltő, mellyel nem csak GNU/Linux, de " +"más operációs rendszer is indítható, mely PC-ken szokásos. Ez a boot betöltő " +"a /etc/lilo.conf fájlban állítható. A fájl minden " +"szerkesztés után futtatni kell a lilo parancsot, mer a " +"módosítások csak e program meghívása után kerülnek helyükre." #. Tag: para #: post-install.xml:207 #, no-c-format -msgid "Important parts of the lilo.conf file are the lines containing the image and other keywords, as well as the lines following those. They can be used to describe a system which can be booted by LILO. Such a system can include a kernel (image), a root partition, additional kernel parameters, etc. as well as a configuration to boot another, non-Linux (other) operating system. These keywords can also be used more than once. The ordering of these systems within the configuration file is important because it determines which system will be booted automatically after, for instance, a timeout (delay) presuming LILO wasn't stopped by pressing the shift key." -msgstr "A lilo.conf fontos részei az image és other szavakat tartalmazó és követő sorok. Ezek használhatók egy a LILO által indítható rendszer leírására. A kernel (kép), gyökér-partíció, további kernel paraméterek, és más beállításokkal bíró rendszerekére is a más, nem-Linux (other) operációs rendszerek indításának beállítására is. A szavak többször is szerepelhetnek. A rendszerek sorrendje fontos, mert az adja meg, mely rendszer induljon magától, például egy késedelmi idő (delay) után, ha LILO nem került leállításra a shift billentyű leütésével." +msgid "" +"Important parts of the lilo.conf file are the lines " +"containing the image and other " +"keywords, as well as the lines following those. They can be used to describe " +"a system which can be booted by LILO. Such a system can " +"include a kernel (image), a root partition, " +"additional kernel parameters, etc. as well as a configuration to boot " +"another, non-Linux (other) operating system. These " +"keywords can also be used more than once. The ordering of these systems " +"within the configuration file is important because it determines which " +"system will be booted automatically after, for instance, a timeout " +"(delay) presuming LILO wasn't " +"stopped by pressing the shift key." +msgstr "" +"A lilo.conf fontos részei az image és other szavakat tartalmazó és követő " +"sorok. Ezek használhatók egy a LILO által indítható " +"rendszer leírására. A kernel (kép), gyökér-partíció, " +"további kernel paraméterek, és más beállításokkal bíró rendszerekére is a " +"más, nem-Linux (other) operációs rendszerek " +"indításának beállítására is. A szavak többször is szerepelhetnek. A " +"rendszerek sorrendje fontos, mert az adja meg, mely rendszer induljon " +"magától, például egy késedelmi idő (delay) után, ha " +"LILO nem került leállításra a shift " +"billentyű leütésével." #. Tag: para #: post-install.xml:223 #, no-c-format msgid "" -"After a fresh install of Debian, just the current system is configured for booting with LILO. If you want to boot another Linux kernel, you have to edit the configuration file /etc/lilo.conf to add the following lines: \n" +"After a fresh install of Debian, just the current system is configured for " +"booting with LILO. If you want to boot another Linux " +"kernel, you have to edit the configuration file /etc/lilo.conf to add the following lines: \n" "&additional-lilo-image;\n" -" For a basic setup just the first two lines are necessary. If you want to know more about the other two options please have a look at the LILO documentation. This can be found in /usr/share/doc/lilo/. The file which should be read is Manual.txt. To have a quicker start into the world of booting a system you can also look at the LILO man pages lilo.conf for an overview of configuration keywords and lilo for description of the installation of the new configuration into the boot sector." +" For a basic setup just the first two lines are " +"necessary. If you want to know more about the other two options please have " +"a look at the LILO documentation. This can be found in " +"/usr/share/doc/lilo/. The file which should be read is " +"Manual.txt. To have a quicker start into the world of " +"booting a system you can also look at the LILO man pages " +"lilo.conf for an overview of configuration keywords and " +"lilo for description of the installation of the new " +"configuration into the boot sector." msgstr "" -"A Debian egy friss telepítése után csak a jelen rendszer indítható, ha a LILO betöltőt használjuk. Ebben az esetben, ha más Linux rendszermagot akarsz indítani, a /etc/lilo.conf fájl szerkesztése szükséges, például: \n" +"A Debian egy friss telepítése után csak a jelen rendszer indítható, ha a " +"LILO betöltőt használjuk. Ebben az esetben, ha más Linux " +"rendszermagot akarsz indítani, a /etc/lilo.conf fájl " +"szerkesztése szükséges, például: \n" "&additional-lilo-image;\n" -" Egy alap beállításhoz csak az 1. 2 sor szükséges. Több adatért lásd a LILO dokumentációját. Ez a /usr/share/doc/lilo/ könyvtárban található. A fontos fájl a Manual.txt. A LILO kézikönyv-oldalait is átnézheted. A lilo.conf tartalmazza a beállításokat, a lilo az új beállító fájl telepítésének leírását." +" Egy alap beállításhoz csak az 1. 2 sor " +"szükséges. Több adatért lásd a LILO dokumentációját. Ez a " +"/usr/share/doc/lilo/ könyvtárban található. A fontos " +"fájl a Manual.txt. A LILO kézikönyv-" +"oldalait is átnézheted. A lilo.conf tartalmazza a " +"beállításokat, a lilo az új beállító fájl telepítésének " +"leírását." #. Tag: para #: post-install.xml:243 #, no-c-format -msgid "Notice that there are other boot loaders available in &debian;, such as GRUB (in grub package), CHOS (in chos package), Extended-IPL (in extipl package), loadlin (in loadlin package) etc." -msgstr "Más fontos boot betöltők is vannak a &debian; rendszerben, például a GRUB (a grub csomagban), CHOS (a chos csomagban), Extended-IPL (az extipl csomagban), loadlin (a loadlin csomagban) és így tovább." +msgid "" +"Notice that there are other boot loaders available in &debian;, such as GRUB " +"(in grub package), CHOS (in chos package), Extended-IPL (in extipl " +"package), loadlin (in loadlin package) etc." +msgstr "" +"Más fontos boot betöltők is vannak a &debian; rendszerben, például a GRUB (a " +"grub csomagban), CHOS (a chos " +"csomagban), Extended-IPL (az extipl csomagban), " +"loadlin (a loadlin csomagban) és így tovább." #. Tag: title #: post-install.xml:258 @@ -171,26 +381,75 @@ msgstr "További olvasnivalók és információk" #. Tag: para #: post-install.xml:259 #, no-c-format -msgid "If you need information about a particular program, you should first try man program, or info program." -msgstr "Ha tájékozódni akarsz egy programról, először majdnem mindig érdemes kipróbálni az info a_program_neve vagy a man a_program_neve parancsot." +msgid "" +"If you need information about a particular program, you should first try " +"man program, or " +"info program." +msgstr "" +"Ha tájékozódni akarsz egy programról, először majdnem mindig érdemes " +"kipróbálni az info a_program_neve vagy a man a_program_neve parancsot." #. Tag: para #: post-install.xml:265 #, no-c-format -msgid "There is lots of useful documentation in /usr/share/doc as well. In particular, /usr/share/doc/HOWTO and /usr/share/doc/FAQ contain lots of interesting information. To submit bugs, look at /usr/share/doc/debian/bug*. To read about Debian-specific issues for particular programs, look at /usr/share/doc/(package name)/README.Debian." -msgstr "Számos részletesebb dokumentáció van a /usr/share/doc könyvtárban. Például a /usr/share/doc/HOWTO és /usr/share/doc/FAQ rengeteg hasznos adattal szolgál. HIbajelentéshez lásd ezt: /usr/share/doc/debian/bug*. Adott program és a Debian kapcsolatáról olvasd el a /usr/share/doc/(csomag név)/README.Debian fájlt." +msgid "" +"There is lots of useful documentation in /usr/share/doc " +"as well. In particular, /usr/share/doc/HOWTO and " +"/usr/share/doc/FAQ contain lots of interesting " +"information. To submit bugs, look at /usr/share/doc/debian/bug*. To read about Debian-specific issues for particular programs, " +"look at /usr/share/doc/(package name)/README.Debian." +msgstr "" +"Számos részletesebb dokumentáció van a /usr/share/doc " +"könyvtárban. Például a /usr/share/doc/HOWTO és " +"/usr/share/doc/FAQ rengeteg hasznos adattal szolgál. " +"HIbajelentéshez lásd ezt: /usr/share/doc/debian/bug*. " +"Adott program és a Debian kapcsolatáról olvasd el a /usr/share/doc/" +"(csomag név)/README.Debian fájlt." #. Tag: para #: post-install.xml:276 #, no-c-format -msgid "The Debian web site contains a large quantity of documentation about Debian. In particular, see the Debian GNU/Linux FAQ and the Debian Reference. An index of more Debian documentation is available from the Debian Documentation Project. The Debian community is self-supporting; to subscribe to one or more of the Debian mailing lists, see the Mail List Subscription page. Last, but not least, the Debian Mailing List Archives contain a wealth of information on Debian." -msgstr "A Debian weblap sok dokumentációt tartalmaz a Debian rendszerről. Lásd például a Debian GNU/Linux GYIK és Debian Reference leírást. Több Debian dokumentáció listája a Debian Dokumentációs Projekt címén. A Debian egy támogatói közösség is, 1 vagy több Debian listára iratkozáshoz lásd a Levelező lista feliratkozás oldalt. Végül, de nem utolsó sorban a Debian levelező lista archívumok a Debian információinak egy aranybányája." +msgid "" +"The Debian web site contains a " +"large quantity of documentation about Debian. In particular, see the Debian GNU/Linux FAQ and the " +"Debian " +"Reference. An index of more Debian documentation is available from " +"the Debian Documentation " +"Project. The Debian community is self-supporting; to subscribe to " +"one or more of the Debian mailing lists, see the Mail List Subscription page. " +"Last, but not least, the Debian " +"Mailing List Archives contain a wealth of information on Debian." +msgstr "" +"A Debian weblap sok " +"dokumentációt tartalmaz a Debian rendszerről. Lásd például a Debian GNU/Linux GYIK és Debian " +"Reference leírást. Több Debian dokumentáció listája a Debian Dokumentációs Projekt " +"címén. A Debian egy támogatói közösség is, 1 vagy több Debian listára " +"iratkozáshoz lásd a Levelező lista feliratkozás oldalt. Végül, de nem utolsó sorban " +"a Debian levelező lista archívumok a Debian információinak egy aranybányája." #. Tag: para #: post-install.xml:294 #, no-c-format -msgid "A general source of information on GNU/Linux is the Linux Documentation Project. There you will find the HOWTOs and pointers to other very valuable information on parts of a GNU/Linux system." -msgstr "A GNU/Linuxról szóló információk egy általános forrása a Linux Dokumentációs Projekt. Itt a GNU/Linux rendszerről szóló HOGYAN leírásokat és más nagyon hasznos adatokra mutató hivatkozásokat találsz." +msgid "" +"A general source of information on GNU/Linux is the Linux Documentation Project. There you will find the " +"HOWTOs and pointers to other very valuable information on parts of a GNU/" +"Linux system." +msgstr "" +"A GNU/Linuxról szóló információk egy általános forrása a Linux Dokumentációs Projekt. Itt a GNU/Linux " +"rendszerről szóló HOGYAN leírásokat és más nagyon hasznos adatokra mutató " +"hivatkozásokat találsz." #. Tag: title #: post-install.xml:309 @@ -201,26 +460,48 @@ msgstr "Új rendszermag (kernel) fordítása" #. Tag: para #: post-install.xml:310 #, no-c-format -msgid "Why would someone want to compile a new kernel? It is often not necessary since the default kernel shipped with Debian handles most configurations. Also, Debian often offers several alternative kernels. So you may want to check first if there is an alternative kernel image package that better corresponds to your hardware. However, it can be useful to compile a new kernel in order to:" -msgstr "Miért akarna valaki új kernelt fordítani? Valóban, ez általában nem szükséges, mivel a Debian által alapértelmezetten adott kernel a legtöbb gépet jól kezeli. Ráadásul a Debian más kerneleket is tartalmaz. Sokszor ezek között is találhatsz a gépedhez jobban illő kernelt. Ezzel együtt néha hasznos lehet új kernelt fordítani az alábbi célokra:" +msgid "" +"Why would someone want to compile a new kernel? It is often not necessary " +"since the default kernel shipped with Debian handles most configurations. " +"Also, Debian often offers several alternative kernels. So you may want to " +"check first if there is an alternative kernel image package that better " +"corresponds to your hardware. However, it can be useful to compile a new " +"kernel in order to:" +msgstr "" +"Miért akarna valaki új kernelt fordítani? Valóban, ez általában nem " +"szükséges, mivel a Debian által alapértelmezetten adott kernel a legtöbb " +"gépet jól kezeli. Ráadásul a Debian más kerneleket is tartalmaz. Sokszor " +"ezek között is találhatsz a gépedhez jobban illő kernelt. Ezzel együtt néha " +"hasznos lehet új kernelt fordítani az alábbi célokra:" #. Tag: para #: post-install.xml:320 #, no-c-format -msgid "handle special hardware needs, or hardware conflicts with the pre-supplied kernels" -msgstr "speciális hardver-igények, vagy ezek az előre-szállított kernelekkel való ütközésük kezelésére" +msgid "" +"handle special hardware needs, or hardware conflicts with the pre-supplied " +"kernels" +msgstr "" +"speciális hardver-igények, vagy ezek az előre-szállított kernelekkel való " +"ütközésük kezelésére" #. Tag: para #: post-install.xml:326 #, no-c-format -msgid "use options of the kernel which are not supported in the pre-supplied kernels (such as high memory support)" -msgstr "olyan kernel lehetőségek használatára, melyek nem kerültek bekapcsolásra az előre-szállított kernelekben (például az átlagnál magasabb memória-tartományok támogatása)" +msgid "" +"use options of the kernel which are not supported in the pre-supplied " +"kernels (such as high memory support)" +msgstr "" +"olyan kernel lehetőségek használatára, melyek nem kerültek bekapcsolásra az " +"előre-szállított kernelekben (például az átlagnál magasabb memória-" +"tartományok támogatása)" #. Tag: para #: post-install.xml:332 #, no-c-format msgid "optimize the kernel by removing useless drivers to speed up boot time" -msgstr "a kernel optimalizálása a nem használt meghajtók mellőzésével az indítási idő további gyorsítására" +msgstr "" +"a kernel optimalizálása a nem használt meghajtók mellőzésével az indítási " +"idő további gyorsítására" #. Tag: para #: post-install.xml:337 @@ -255,68 +536,225 @@ msgstr "Próbáld ki bátran a kernel-fordítást. Ez kellemes és ráadásul ha #. Tag: para #: post-install.xml:361 #, no-c-format -msgid "To compile a kernel the Debian way, you need some packages: fakeroot, kernel-package, kernel-source-&kernelversion; (the most recent version at the time of this writing) linux-source-2.6 and a few others which are probably already installed (see /usr/share/doc/kernel-package/README.gz for the complete list)." -msgstr "Ha a Debian módszerével fordítanál, szükséged lesz pár csomagra, úgymint: fakeroot, kernel-package, kernel-source-&kernelversion; (a legújabb verzió, mikor ezt írom) linux-source-2.6 és egy pár egyébre, mely már valószínűleg telepítve van (a teljes listát elolvashatod a /usr/share/doc/kernel-package/README.gz fájlban)." +msgid "" +"To compile a kernel the Debian way, you need some packages: " +"fakeroot, kernel-package, " +"kernel-source-&kernelversion; (the most recent version at the time of this writing) " +"linux-source-2.6 and a few others which are probably already installed (see " +"/usr/share/doc/kernel-package/README.gz for the " +"complete list)." +msgstr "" +"Ha a Debian módszerével fordítanál, szükséged lesz pár csomagra, úgymint: " +"fakeroot, kernel-package, " +"kernel-source-&kernelversion; (a legújabb verzió, mikor ezt írom) linux-source-2.6 és egy pár " +"egyébre, mely már valószínűleg telepítve van (a teljes listát elolvashatod a " +"/usr/share/doc/kernel-package/README.gz fájlban)." #. Tag: para #: post-install.xml:372 #, no-c-format -msgid "This method will make a .deb of your kernel source, and, if you have non-standard modules, make a synchronized dependent .deb of those too. It's a better way to manage kernel images; /boot will hold the kernel, the System.map, and a log of the active config file for the build." -msgstr "E módszer elkészíti a .deb csomagot a kernel-forrásból, és, ha nem- szabvány moduljaid vannak, azokra is elkészíti a megfelelően függőt. Ez sokkal jobb mód a kernel-képek kezelésére; a /boot könyvtár tartalmazza majd a kernelt, a System.map fájlt és az aktív konfigurációs fájl naplóját az elkészítéshez." +msgid "" +"This method will make a .deb of your kernel source, and, if you have non-" +"standard modules, make a synchronized dependent .deb of those too. It's a " +"better way to manage kernel images; /boot will hold the " +"kernel, the System.map, and a log of the active config file for the build." +msgstr "" +"E módszer elkészíti a .deb csomagot a kernel-forrásból, és, ha nem- szabvány " +"moduljaid vannak, azokra is elkészíti a megfelelően függőt. Ez sokkal jobb " +"mód a kernel-képek kezelésére; a /boot könyvtár " +"tartalmazza majd a kernelt, a System.map fájlt és az aktív konfigurációs " +"fájl naplóját az elkészítéshez." #. Tag: para #: post-install.xml:380 #, no-c-format -msgid "Note that you don't have to compile your kernel the Debian way; but we find that using the packaging system to manage your kernel is actually safer and easier. In fact, you can get your kernel sources right from Linus instead of kernel-source-&kernelversion;, linux-source-2.6, yet still use the kernel-package compilation method." -msgstr "Tudd, hogy nem kell a kernelt a Debian módszer útján fordítanod; de a kernel csomagoló rendszerrel való kezelése biztosabb és könnyebb. Fontos tudni, hogy a kernel forrásokat Linustól is letöltheted a Debian kernel-source-&kernelversion;, linux-source-2.6, csomagok használata helyett, és még így is rendelkezésedre áll a kernel-package kernel-fordítási módszer használata." +msgid "" +"Note that you don't have to compile your kernel the " +"Debian way; but we find that using the packaging system to " +"manage your kernel is actually safer and easier. In fact, you can get your " +"kernel sources right from Linus instead of kernel-source-&kernelversion;, linux-source-2.6, " +"yet still use the kernel-package compilation method." +msgstr "" +"Tudd, hogy nem kell a kernelt a Debian módszer útján fordítanod; de a kernel csomagoló rendszerrel való kezelése " +"biztosabb és könnyebb. Fontos tudni, hogy a kernel forrásokat Linustól is " +"letöltheted a Debian kernel-" +"source-&kernelversion;, linux-source-2.6, csomagok használata " +"helyett, és még így is rendelkezésedre áll a kernel-package kernel-fordítási módszer használata." #. Tag: para #: post-install.xml:390 #, no-c-format -msgid "Note that you'll find complete documentation on using kernel-package under /usr/share/doc/kernel-package. This section just contains a brief tutorial." -msgstr "Jó tudni, hogy a kernel-package módról teljes leírás található a /usr/share/doc/kernel-package könyvtárban." +msgid "" +"Note that you'll find complete documentation on using kernel-" +"package under /usr/share/doc/kernel-package. This section just contains a brief tutorial." +msgstr "" +"Jó tudni, hogy a kernel-package módról teljes leírás " +"található a /usr/share/doc/kernel-package könyvtárban." #. Tag: para #: post-install.xml:397 #, no-c-format -msgid "Hereafter, we'll assume you have free rein over your machine and will extract your kernel source to somewhere in your home directory There are other locations where you can extract kernel sources and build your custom kernel, but this is easiest as it does not require special permissions. . We'll also assume that your kernel version is &kernelversion;. Make sure you are in the directory to where you want to unpack the kernel sources, extract them using tar xjf /usr/src/kernel-source-&kernelversion;.tar.bz2 tar xjf /usr/src/linux-source-&kernelversion;.tar.bz2 and change to the directory kernel-source-&kernelversion; linux-source-&kernelversion; that will have been created." -msgstr "Mostantól azt feltételezzük, hogy szabadon mozogsz a gépen, és a kernel forrását kicsomagolod a saját könyvtáradba Vannak más helyek is, ahova kicsomagolhatod és ahol elkészítheted saját kerneledet, de ez a legegyszerűbb és nem igényel különleges jogokat.. . A példában azt vesszük, hogy kerneled verziója &kernelversion;. Győződj meg, hogy abban a könyvtárban vagy, ahova ki akarod bontani a kernelforrásokat, csomagold ki őket így: tar xjf /usr/src/kernel-source-&kernelversion;.tar.bz2 tar xjf /usr/src/linux-source-&kernelversion;.tar.bz2 és lépj a létrejött kernel-source-&kernelversion; linux-source-&kernelversion; könyvtárba." +msgid "" +"Hereafter, we'll assume you have free rein over your machine and will " +"extract your kernel source to somewhere in your home directory " +" There are other locations where you can extract kernel sources and " +"build your custom kernel, but this is easiest as it does not require special " +"permissions. . We'll also assume that your kernel version " +"is &kernelversion;. Make sure you are in the directory to where you want to " +"unpack the kernel sources, extract them using tar xjf /usr/src/kernel-source-&kernelversion;.tar.bz2 tar xjf /" +"usr/src/linux-source-&kernelversion;.tar.bz2 and change " +"to the directory kernel-source-" +"&kernelversion; linux-source-&kernelversion; that will have " +"been created." +msgstr "" +"Mostantól azt feltételezzük, hogy szabadon mozogsz a gépen, és a kernel " +"forrását kicsomagolod a saját könyvtáradba Vannak más " +"helyek is, ahova kicsomagolhatod és ahol elkészítheted saját kerneledet, de " +"ez a legegyszerűbb és nem igényel különleges jogokat.. . " +"A példában azt vesszük, hogy kerneled verziója &kernelversion;. Győződj meg, " +"hogy abban a könyvtárban vagy, ahova ki akarod bontani a kernelforrásokat, " +"csomagold ki őket így: tar " +"xjf /usr/src/kernel-source-&kernelversion;.tar.bz2 " +"tar xjf /usr/src/linux-source-" +"&kernelversion;.tar.bz2 és lépj a létrejött kernel-source-&kernelversion; linux-source-" +"&kernelversion; könyvtárba." #. Tag: para #: post-install.xml:422 #, no-c-format -msgid "Now, you can configure your kernel. Run make xconfig if X11 is installed, configured and being run; run make menuconfig otherwise (you'll need libncurses5-dev installed). Take the time to read the online help and choose carefully. When in doubt, it is typically better to include the device driver (the software which manages hardware peripherals, such as Ethernet cards, SCSI controllers, and so on) you are unsure about. Be careful: other options, not related to a specific hardware, should be left at the default value if you do not understand them. Do not forget to select Kernel module loader in Loadable module support (it is not selected by default). If not included, your Debian installation will experience problems." -msgstr "Most jöhet a kernel beállítása. Indíts egy make xconfig parancsot, ha X alatt akarsz dolgozni és erre módod van; vagy futtasd a make menuconfig parancsot (a libncurses5-dev csomag kell). Szánj időt a súgó elolvasására és válassz ésszerűen. Kétség esetén általában jobb kiválasztani egy olyan eszköz-meghajtót (azok a szoftverek, melyek a hardver perifériákat kezelik, például hálózati (ethernet) kártyák, SCSI vezérlők, és így tovább), melyben nem vagy biztos. Légy óvatos: más lehetőségeket, melyek nem adott hardverre vonatkoznak, hagyj a megadott értéken, ha nem érted. Ne feledd kijelölni a Kernel module loader lehetőséget a Loadable module support menüben (ez nincs alapban kijelölve). Ha nem adod meg, akkor a Debian telepítésed valószínűleg hibákat fog észlelni." +msgid "" +"Now, you can configure your kernel. Run make xconfig " +"if X11 is installed, configured and being run; run make " +"menuconfig otherwise (you'll need libncurses5-dev installed). Take the time to read the online help and choose " +"carefully. When in doubt, it is typically better to include the device " +"driver (the software which manages hardware peripherals, such as Ethernet " +"cards, SCSI controllers, and so on) you are unsure about. Be careful: other " +"options, not related to a specific hardware, should be left at the default " +"value if you do not understand them. Do not forget to select Kernel " +"module loader in Loadable module support (it is not " +"selected by default). If not included, your Debian installation will " +"experience problems." +msgstr "" +"Most jöhet a kernel beállítása. Indíts egy make xconfig parancsot, ha X alatt akarsz dolgozni és erre módod van; vagy " +"futtasd a make menuconfig parancsot (a " +"libncurses5-dev csomag kell). Szánj időt a súgó " +"elolvasására és válassz ésszerűen. Kétség esetén általában jobb kiválasztani " +"egy olyan eszköz-meghajtót (azok a szoftverek, melyek a hardver perifériákat " +"kezelik, például hálózati (ethernet) kártyák, SCSI vezérlők, és így tovább), " +"melyben nem vagy biztos. Légy óvatos: más lehetőségeket, melyek nem adott " +"hardverre vonatkoznak, hagyj a megadott értéken, ha nem érted. Ne feledd " +"kijelölni a Kernel module loader lehetőséget a " +"Loadable module support menüben (ez nincs alapban kijelölve). " +"Ha nem adod meg, akkor a Debian telepítésed valószínűleg hibákat fog " +"észlelni." #. Tag: para #: post-install.xml:437 #, no-c-format -msgid "Clean the source tree and reset the kernel-package parameters. To do that, do make-kpkg clean." -msgstr "Tisztítsd a forrást és a kernel-package paramétereket. Add ki a make-kpkg clean parancsot." +msgid "" +"Clean the source tree and reset the kernel-package " +"parameters. To do that, do make-kpkg clean." +msgstr "" +"Tisztítsd a forrást és a kernel-package " +"paramétereket. Add ki a make-kpkg clean parancsot." #. Tag: para #: post-install.xml:442 #, no-c-format -msgid "Now, compile the kernel: fakeroot make-kpkg --initrd --revision=custom.1.0 kernel_image. The version number of 1.0 can be changed at will; this is just a version number that you will use to track your kernel builds. Likewise, you can put any word you like in place of custom (e.g., a host name). Kernel compilation may take quite a while, depending on the power of your machine." -msgstr "Most fordítsd le a kernelt: fakeroot make-kpkg --initrd --revision=egyedi.1.0 kernel_image. Az 1.0 verziószám bármi lehet; ez csak arra jó, hogy többszöri fordítás esetén kövesd ezek sorát. Az egyedi szó helyére is bármit tehetsz (például a gép nevét). A kernel fordítás eltarthat egy ideig, attól függ, milyen géped van." +msgid "" +"Now, compile the kernel: fakeroot make-kpkg --initrd --" +"revision=custom.1.0 kernel_image. The version number of " +"1.0 can be changed at will; this is just a version number " +"that you will use to track your kernel builds. Likewise, you can put any " +"word you like in place of custom (e.g., a host name). Kernel " +"compilation may take quite a while, depending on the power of your machine." +msgstr "" +"Most fordítsd le a kernelt: fakeroot make-kpkg --initrd --" +"revision=egyedi.1.0 kernel_image. Az 1.0 " +"verziószám bármi lehet; ez csak arra jó, hogy többszöri fordítás esetén " +"kövesd ezek sorát. Az egyedi szó helyére is bármit tehetsz " +"(például a gép nevét). A kernel fordítás eltarthat egy ideig, attól függ, " +"milyen géped van." #. Tag: para #: post-install.xml:452 #, no-c-format -msgid "Once the compilation is complete, you can install your custom kernel like any package. As root, do dpkg -i ../kernel-image-&kernelversion;-subarchitecture_custom.1.0_&architecture;.deb. dpkg -i ../linux-image-&kernelversion;-subarchitecture_custom.1.0_&architecture;.deb. The subarchitecture part is an optional sub-architecture, such as 686, depending on what kernel options you set. dpkg -i will install the kernel, along with some other nice supporting files. For instance, the System.map will be properly installed (helpful for debugging kernel problems), and /boot/config-&kernelversion; will be installed, containing your current configuration set. Your new kernel package is also clever enough to automatically update your boot loader to use the new kernel. If you have created a modules package, e.g., if you have PCMCIA, you'll need to install that package as well." -msgstr "A fordítás végeztével más csomaghoz hasonlóan telepítheted az egyedi kernelt. Rendszergazdaként add ki ezt a parancsot: dpkg -i ../kernel-image-&kernelversion;-alarchitektúra_egyedi.1.0_&architecture;.deb. dpkg -i ../linux-image-&kernelversion;-alarchitektúra_egyedi.1.0_&architecture;.deb. Az alarchitektúra rész egy lehetséges al-architektúra, például 686, a beállított kernelopcióktól is függ. A dpkg -i telepíti a kernelt kiegészítő támogató fájlokkal. Például a System.map megfelelően telepítésre kerül (kernelhibák keresését segíti), és a /boot/config-&kernelversion; is telepítésre kerül, mely a beállításokat tartalmazza. Az új kernel csomag automatikusak frissíti is a boott betöltőt. Ha modul csomagot is készítettél például PCMCIA esetén, azt a csomagot is telepítened kell." +msgid "" +"Once the compilation is complete, you can install your custom kernel like " +"any package. As root, do dpkg " +"-i ../kernel-image-&kernelversion;-subarchitecture_custom.1.0_&architecture;.deb. dpkg -i ../linux-image-&kernelversion;-" +"subarchitecture_custom.1.0_&architecture;.deb. The subarchitecture part is " +"an optional sub-architecture, such as 686, depending on what kernel options you set. dpkg -" +"i will install the kernel, along with some other nice supporting " +"files. For instance, the System.map will be properly " +"installed (helpful for debugging kernel problems), and /boot/" +"config-&kernelversion; will be installed, containing your current " +"configuration set. Your new kernel package is also clever enough to " +"automatically update your boot loader to use the new kernel. If you have " +"created a modules package, e.g., if you " +"have PCMCIA, you'll need to install that package as well." +msgstr "" +"A fordítás végeztével más csomaghoz hasonlóan telepítheted az egyedi " +"kernelt. Rendszergazdaként add ki ezt a parancsot: dpkg -i ../kernel-image-&kernelversion;-" +"alarchitektúra_egyedi.1.0_&architecture;.deb. dpkg -" +"i ../linux-image-&kernelversion;-alarchitektúra_egyedi.1.0_&architecture;.deb. Az " +"alarchitektúra rész egy lehetséges al-" +"architektúra, például 686, a " +"beállított kernelopcióktól is függ. A dpkg -i " +"telepíti a kernelt kiegészítő támogató fájlokkal. Például a System." +"map megfelelően telepítésre kerül (kernelhibák keresését segíti), " +"és a /boot/config-&kernelversion; is telepítésre kerül, " +"mely a beállításokat tartalmazza. Az új kernel csomag automatikusak frissíti " +"is a boott betöltőt. Ha modul csomagot is készítettél például PCMCIA esetén, azt a csomagot is " +"telepítened kell." #. Tag: para #: post-install.xml:479 #, no-c-format -msgid "It is time to reboot the system: read carefully any warning that the above step may have produced, then shutdown -r now." -msgstr "Ideje újraindítani a rendszert: olvass el gondosan minden figyelmeztetést, amit a fentiek írtak, és ezután jöhet a shutdown -r now." +msgid "" +"It is time to reboot the system: read carefully any warning that the above " +"step may have produced, then shutdown -r now." +msgstr "" +"Ideje újraindítani a rendszert: olvass el gondosan minden figyelmeztetést, " +"amit a fentiek írtak, és ezután jöhet a shutdown -r now." #. Tag: para #: post-install.xml:484 #, no-c-format -msgid "For more information on Debian kernels and kernel compilation, see the Debian Linux Kernel Handbook. For more information on kernel-package, read the fine documentation in /usr/share/doc/kernel-package." -msgstr "További adatokért a Debian kernelekről és kernel-fordításról, lásd a Debian Linux Kernel Kézikönyvet." +msgid "" +"For more information on Debian kernels and kernel compilation, see the " +"Debian Linux Kernel Handbook. " +"For more information on kernel-package, read the fine " +"documentation in /usr/share/doc/kernel-package." +msgstr "" +"További adatokért a Debian kernelekről és kernel-fordításról, lásd a Debian Linux Kernel Kézikönyvet." #. Tag: title #: post-install.xml:500 @@ -327,32 +765,89 @@ msgstr "Egy sérült rendszer helyreállítása" #. Tag: para #: post-install.xml:501 #, no-c-format -msgid "Sometimes, things go wrong, and the system you've carefully installed is no longer bootable. Perhaps the boot loader configuration broke while trying out a change, or perhaps a new kernel you installed won't boot, or perhaps cosmic rays hit your disk and flipped a bit in /sbin/init. Regardless of the cause, you'll need to have a system to work from while you fix it, and rescue mode can be useful for this." -msgstr "Mint bármi, egy gondosan telepített rendszer is elromolhat. Például egy változtatásnál elállítjuk a boot betöltőt, egy nem megfelelő kernelre váltunk és nem indul, vagy teljesen véletlenül, például a lemezt érő kozmikus háttérsugárzás átbillent egy érzékeny bitet a /sbin/init fájlban. Ezért szükséged lesz egy rendszerre, melyről javíthatsz, és erre kiválóan alkalmas lesz például a telepítő mentési módja." +msgid "" +"Sometimes, things go wrong, and the system you've carefully installed is no " +"longer bootable. Perhaps the boot loader configuration broke while trying " +"out a change, or perhaps a new kernel you installed won't boot, or perhaps " +"cosmic rays hit your disk and flipped a bit in /sbin/init. Regardless of the cause, you'll need to have a system to work " +"from while you fix it, and rescue mode can be useful for this." +msgstr "" +"Mint bármi, egy gondosan telepített rendszer is elromolhat. Például egy " +"változtatásnál elállítjuk a boot betöltőt, egy nem megfelelő kernelre " +"váltunk és nem indul, vagy teljesen véletlenül, például a lemezt érő " +"kozmikus háttérsugárzás átbillent egy érzékeny bitet a /sbin/init fájlban. Ezért szükséged lesz egy rendszerre, melyről javíthatsz, " +"és erre kiválóan alkalmas lesz például a telepítő mentési módja." #. Tag: para #: post-install.xml:511 #, no-c-format -msgid "To access rescue mode, type rescue at the boot: prompt, or boot with the rescue/enable=true boot parameter. You'll be shown the first few screens of the installer, with a note in the corner of the display to indicate that this is rescue mode, not a full installation. Don't worry, your system is not about to be overwritten! Rescue mode simply takes advantage of the hardware detection facilities available in the installer to ensure that your disks, network devices, and so on are available to you while repairing your system." -msgstr "A mentési mód eléréséhez üsd be rescue szót a boot: beviteli jelnél, vagy indíts a rescue/enable=true paraméterrel. A telepítő 1. pár képernyőjét látod a sarokban megjegyezve, hogy ez mentési mód nem egy teljes telepítés. Ne aggódj, a rendszeredet nem fogja felülírni. A mentési mód egyszerűen csak kihasználja a telepítőben lévő hardver-felismerés előnyeit, hogy a javításhoz használni tudd őket." +msgid "" +"To access rescue mode, type rescue at the " +"boot: prompt, or boot with the rescue/" +"enable=true boot parameter. You'll be shown the first few " +"screens of the installer, with a note in the corner of the display to " +"indicate that this is rescue mode, not a full installation. Don't worry, " +"your system is not about to be overwritten! Rescue mode simply takes " +"advantage of the hardware detection facilities available in the installer to " +"ensure that your disks, network devices, and so on are available to you " +"while repairing your system." +msgstr "" +"A mentési mód eléréséhez üsd be rescue szót a " +"boot: beviteli jelnél, vagy indíts a rescue/" +"enable=true paraméterrel. A telepítő 1. pár képernyőjét látod a " +"sarokban megjegyezve, hogy ez mentési mód nem egy teljes telepítés. Ne " +"aggódj, a rendszeredet nem fogja felülírni. A mentési mód egyszerűen csak " +"kihasználja a telepítőben lévő hardver-felismerés előnyeit, hogy a " +"javításhoz használni tudd őket." #. Tag: para #: post-install.xml:526 #, no-c-format -msgid "Instead of the partitioning tool, you should now be presented with a list of the partitions on your system, and asked to select one of them. Normally, you should select the partition containing the root file system that you need to repair. You may select partitions on RAID and LVM devices as well as those created directly on disks." -msgstr "A particionáló eszköz helyett egyszerűen kiválaszthatsz egyet. Itt általában a javítandó rendszer gyökér fájlrendszerét tartalmazó partíciót kell kiválasztanod." +msgid "" +"Instead of the partitioning tool, you should now be presented with a list of " +"the partitions on your system, and asked to select one of them. Normally, " +"you should select the partition containing the root file system that you " +"need to repair. You may select partitions on RAID and LVM devices as well as " +"those created directly on disks." +msgstr "" +"A particionáló eszköz helyett egyszerűen kiválaszthatsz egyet. Itt általában " +"a javítandó rendszer gyökér fájlrendszerét tartalmazó partíciót kell " +"kiválasztanod." #. Tag: para #: post-install.xml:534 #, no-c-format -msgid "If possible, the installer will now present you with a shell prompt in the file system you selected, which you can use to perform any necessary repairs. For example, if you need to reinstall the GRUB boot loader into the master boot record of the first hard disk, you could enter the command grub-install '(hd0)' to do so. " -msgstr "Ha lehetséges, a telepítő bead egy héj promptot a kijelölt fájlrendszeren, mellyel bármilyen javítási műveletet végezhetsz. Például ha újra kell tenned a GRUB boot betöltőt az 1. merevlemez MBR-jébe, kiadhatod a grub-install '(hd0)' parancsot. " +msgid "" +"If possible, the installer will now present you with a shell prompt in the " +"file system you selected, which you can use to perform any necessary " +"repairs. For example, if you need to reinstall the " +"GRUB boot loader into the master boot record of the first hard disk, you " +"could enter the command grub-install '(hd0)' to do " +"so. " +msgstr "" +"Ha lehetséges, a telepítő bead egy héj promptot a kijelölt fájlrendszeren, " +"mellyel bármilyen javítási műveletet végezhetsz. " +"Például ha újra kell tenned a GRUB boot betöltőt az 1. merevlemez MBR-jébe, " +"kiadhatod a grub-install '(hd0)' parancsot. " #. Tag: para #: post-install.xml:546 #, no-c-format -msgid "If the installer cannot run a usable shell in the root file system you selected, perhaps because the file system is corrupt, then it will issue a warning and offer to give you a shell in the installer environment instead. You may not have as many tools available in this environment, but they will often be enough to repair your system anyway. The root file system you selected will be mounted on the /target directory." -msgstr "Ha a telepítő nem tud használható héjat futtatni a kijelölt gyökér fájlrendszeren, mert az például sérült, figyelmeztet és felajánlja, hogy nyit egy héjat a telepítő környezetén belül. Itt nincs annyi eszközöd, de általában elég a rendszer alapvető megjavításához. A kijelölt gyökér fájlrendszert a /target könyvtárba csatolja." +msgid "" +"If the installer cannot run a usable shell in the root file system you " +"selected, perhaps because the file system is corrupt, then it will issue a " +"warning and offer to give you a shell in the installer environment instead. " +"You may not have as many tools available in this environment, but they will " +"often be enough to repair your system anyway. The root file system you " +"selected will be mounted on the /target directory." +msgstr "" +"Ha a telepítő nem tud használható héjat futtatni a kijelölt gyökér " +"fájlrendszeren, mert az például sérült, figyelmeztet és felajánlja, hogy " +"nyit egy héjat a telepítő környezetén belül. Itt nincs annyi eszközöd, de " +"általában elég a rendszer alapvető megjavításához. A kijelölt gyökér " +"fájlrendszert a /target könyvtárba csatolja." #. Tag: para #: post-install.xml:555 @@ -363,6 +858,11 @@ msgstr "A héjből való kilépés újraindít." #. Tag: para #: post-install.xml:559 #, no-c-format -msgid "Finally, note that repairing broken systems can be difficult, and this manual does not attempt to go into all the things that might have gone wrong or how to fix them. If you have problems, consult an expert." -msgstr "Természetesen egy sérült rendszer javítása ennél jóval nehezebb is lehet és e leírás nem szólhat az összes lehetséges részletről. Ha kérdésed van, bátran kérd a közösség segítségét!" - +msgid "" +"Finally, note that repairing broken systems can be difficult, and this " +"manual does not attempt to go into all the things that might have gone wrong " +"or how to fix them. If you have problems, consult an expert." +msgstr "" +"Természetesen egy sérült rendszer javítása ennél jóval nehezebb is lehet és " +"e leírás nem szólhat az összes lehetséges részletről. Ha kérdésed van, " +"bátran kérd a közösség segítségét!" diff --git a/po/ro/using-d-i.po b/po/ro/using-d-i.po index 1bbcf46b6..fd25c3ad6 100644 --- a/po/ro/using-d-i.po +++ b/po/ro/using-d-i.po @@ -13,7 +13,8 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.2\n" -"Plural-Forms: nplurals=3;plural=(n==1?0:(((n%100>19)||((n%100==0)&&(n!=0)))?2:1))\n" +"Plural-Forms: nplurals=3;plural=(n==1?0:(((n%100>19)||((n%100==0)&&(n!=0)))?" +"2:1))\n" #. Tag: title #: using-d-i.xml:5 @@ -30,62 +31,187 @@ msgstr "Cum funcţionează programul de instalare" #. Tag: para #: using-d-i.xml:8 #, no-c-format -msgid "The Debian Installer consists of a number of special-purpose components to perform each installation task. Each component performs its task, asking the user questions as necessary to do its job. The questions themselves are given priorities, and the priority of questions to be asked is set when the installer is started." -msgstr "Programul de instalare al Debian consistă dintr-o colecţie de componente cu scop specific în procesul de instalare , la fiecare dintre paşii acestuia. Fiecare componentă îşi efectuează propria sarcină, punând necesarul întrebări utilizatorului pentru a-şi putea îndeplini sarcina. Aceste întrebări au priorităţi şi pragul priorităţii întrebărilor care sunt puse utilizatorului este stabilit la pornirea programului de instalare." +msgid "" +"The Debian Installer consists of a number of special-purpose components to " +"perform each installation task. Each component performs its task, asking the " +"user questions as necessary to do its job. The questions themselves are " +"given priorities, and the priority of questions to be asked is set when the " +"installer is started." +msgstr "" +"Programul de instalare al Debian consistă dintr-o colecţie de componente cu " +"scop specific în procesul de instalare , la fiecare dintre paşii acestuia. " +"Fiecare componentă îşi efectuează propria sarcină, punând necesarul " +"întrebări utilizatorului pentru a-şi putea îndeplini sarcina. Aceste " +"întrebări au priorităţi şi pragul priorităţii întrebărilor care sunt puse " +"utilizatorului este stabilit la pornirea programului de instalare." #. Tag: para #: using-d-i.xml:16 #, no-c-format -msgid "When a default installation is performed, only essential (high priority) questions will be asked. This results in a highly automated installation process with little user interaction. Components are automatically run in sequence; which components are run depends mainly on the installation method you use and on your hardware. The installer will use default values for questions that are not asked." -msgstr "Când se efectuează o instalare implicită, numai întrebările esenţiale (prioritate mare) vor fi afişate utilizatorului. Aceasta duce la un proces de instalare puternic automatizat cu puţine intervenţii din partea utilizatorului. Componenetele sunt rulate automat secvenţial; alegerea componentelor care sunt rulate depinde în principal de metoda de instalare folosită şi de componentele hardware. Programul de instalare va folosi valorile implicite pentru întrbările neafişate." +msgid "" +"When a default installation is performed, only essential (high priority) " +"questions will be asked. This results in a highly automated installation " +"process with little user interaction. Components are automatically run in " +"sequence; which components are run depends mainly on the installation method " +"you use and on your hardware. The installer will use default values for " +"questions that are not asked." +msgstr "" +"Când se efectuează o instalare implicită, numai întrebările esenţiale " +"(prioritate mare) vor fi afişate utilizatorului. Aceasta duce la un proces " +"de instalare puternic automatizat cu puţine intervenţii din partea " +"utilizatorului. Componenetele sunt rulate automat secvenţial; alegerea " +"componentelor care sunt rulate depinde în principal de metoda de instalare " +"folosită şi de componentele hardware. Programul de instalare va folosi " +"valorile implicite pentru întrbările neafişate." #. Tag: para #: using-d-i.xml:25 #, no-c-format -msgid "If there is a problem, the user will see an error screen, and the installer menu may be shown in order to select some alternative action. If there are no problems, the user will never see the installer menu, but will simply answer questions for each component in turn. Serious error notifications are set to priority critical so the user will always be notified." -msgstr "Dacă apare vreo problemă, utilzatorul va vedea un mesaj de eroare şi este posibil ca meniul programului de instalare să fie afişat pentru a selecta o altă acţiune. Dacă nu apar probleme, utilizatorul nu va vedea deloc meniul, ci va răspunde la întrebările fiecărei componente, la rând. Notifcările legate de erorile grave au prioritatea critică atfel încât utilizatorul va fi mereu notificat." +msgid "" +"If there is a problem, the user will see an error screen, and the installer " +"menu may be shown in order to select some alternative action. If there are " +"no problems, the user will never see the installer menu, but will simply " +"answer questions for each component in turn. Serious error notifications are " +"set to priority critical so the user will always be notified." +msgstr "" +"Dacă apare vreo problemă, utilzatorul va vedea un mesaj de eroare şi este " +"posibil ca meniul programului de instalare să fie afişat pentru a selecta o " +"altă acţiune. Dacă nu apar probleme, utilizatorul nu va vedea deloc meniul, " +"ci va răspunde la întrebările fiecărei componente, la rând. Notifcările " +"legate de erorile grave au prioritatea critică atfel încât " +"utilizatorul va fi mereu notificat." #. Tag: para #: using-d-i.xml:34 #, no-c-format -msgid "Some of the defaults that the installer uses can be influenced by passing boot arguments when &d-i; is started. If, for example, you wish to force static network configuration (DHCP is used by default if available), you could add the boot parameter netcfg/disable_dhcp=true. See for available options." -msgstr "Comportamentul implicit al programului de instalare poate fi influenţat, în parte, prin pasarea de argumente la pornire, atunci când &d-i; este pornit. Dacă, de exemplu, doriţi să forţaţi să se folosească configurarea statică a reţelisticii (implicit se foloseşte DHCP, dacă este disponibil), aţi putea adăuga la parametrii de pornire netcfg/disable_dhcp=true. A se vedea pentru opţiunile disponibile." +msgid "" +"Some of the defaults that the installer uses can be influenced by passing " +"boot arguments when &d-i; is started. If, for example, you wish to force " +"static network configuration (DHCP is used by default if available), you " +"could add the boot parameter netcfg/disable_dhcp=true. See for available options." +msgstr "" +"Comportamentul implicit al programului de instalare poate fi influenţat, în " +"parte, prin pasarea de argumente la pornire, atunci când &d-i; este pornit. " +"Dacă, de exemplu, doriţi să forţaţi să se folosească configurarea statică a " +"reţelisticii (implicit se foloseşte DHCP, dacă este disponibil), aţi putea " +"adăuga la parametrii de pornire netcfg/disable_dhcp=true. A se vedea pentru opţiunile " +"disponibile." #. Tag: para #: using-d-i.xml:42 #, no-c-format -msgid "Power users may be more comfortable with a menu-driven interface, where each step is controlled by the user rather than the installer performing each step automatically in sequence. To use the installer in a manual, menu-driven way, add the boot argument priority=medium." -msgstr "Utilizatorii avansaţi se vor simţi, probabil, mai confortabil într-o interfaţă bazată pe meniu, unde fiecare pas este controlat de utilizator în loc ca programul de instalare să efectueze automat şi secvenţial paşii necesari la instalare. Pentru a folosi mediul de instalare într-o manieră bazată pe meniu, adăugaţi la argumentele de pornire priority=medium." +msgid "" +"Power users may be more comfortable with a menu-driven interface, where each " +"step is controlled by the user rather than the installer performing each " +"step automatically in sequence. To use the installer in a manual, menu-" +"driven way, add the boot argument priority=medium." +msgstr "" +"Utilizatorii avansaţi se vor simţi, probabil, mai confortabil într-o " +"interfaţă bazată pe meniu, unde fiecare pas este controlat de utilizator în " +"loc ca programul de instalare să efectueze automat şi secvenţial paşii " +"necesari la instalare. Pentru a folosi mediul de instalare într-o manieră " +"bazată pe meniu, adăugaţi la argumentele de pornire " +"priority=medium." #. Tag: para #: using-d-i.xml:50 #, no-c-format -msgid "If your hardware requires you to pass options to kernel modules as they are installed, you will need to start the installer in expert mode. This can be done by either using the expert command to start the installer or by adding the boot argument priority=low. Expert mode gives you full control over &d-i;." -msgstr "Dacă vre-una dintre componentele calculatorului necesită să-i fie pasate opţiuni modulelor nucleului la instalare, va trebui să porniţi programul de instalare în modul expert. Acest lucru se poate face fie folosind comanda expert pentru a porni programul de instalare, fie prin adăugarea parametrului de pornire priority=low. Modul expert vă oferă controlul total asupra &d-i;." +msgid "" +"If your hardware requires you to pass options to kernel modules as they are " +"installed, you will need to start the installer in expert " +"mode. This can be done by either using the expert command " +"to start the installer or by adding the boot argument " +"priority=low. Expert mode gives you full control over " +"&d-i;." +msgstr "" +"Dacă vre-una dintre componentele calculatorului necesită să-i fie pasate " +"opţiuni modulelor nucleului la instalare, va trebui să porniţi programul de " +"instalare în modul expert. Acest lucru se poate face fie " +"folosind comanda expert pentru a porni programul de " +"instalare, fie prin adăugarea parametrului de pornire " +"priority=low. Modul expert vă oferă controlul total " +"asupra &d-i;." #. Tag: para #: using-d-i.xml:59 #, no-c-format -msgid "The normal installer display is character-based (as opposed to the now more familiar graphical interface). The mouse is not operational in this environment. Here are the keys you can use to navigate within the various dialogs. The Tab or right arrow keys move forward, and the Shift Tab or left arrow keys move backward between displayed buttons and selections. The up and down arrow select different items within a scrollable list, and also scroll the list itself. In addition, in long lists, you can type a letter to cause the list to scroll directly to the section with items starting with the letter you typed and use Pg-Up and Pg-Down to scroll the list in sections. The space bar selects an item such as a checkbox. Use &enterkey; to activate choices." -msgstr "Afişajul obişnuit al mediului de instalare este în mod text (nu în familiarul mediu grafic). Mausul nu funcţionează în acest mediu. Iată tastele care pot fi folosite pentru a vă deplasa în diversele ferestre de dialog: Tab sau săgeata dreapta înaintează, iar Shift Tab sau săgeata stânga deplasează cursorul înapoi între butoanele şi selecţiile afişate. Săgeţile sus şi jos selectează diferitele elemente dintr-o listă derulantă, dar şi defilează lista însăşi. în plus, în listele lungi puteţi scrie o literă pentru a determina derularea listei direct la secţiunea cu elemente care încep cu litera tastată şi puteţi să folosiţi Pg-Up şi Pg-Down pentru a derula lista în secţiuni. Tasta spaţiu selectează elemete precum bife. Folosiţi &enterkey; pentru a activa ce aţi ales." +msgid "" +"The normal installer display is character-based (as opposed to the now more " +"familiar graphical interface). The mouse is not operational in this " +"environment. Here are the keys you can use to navigate within the various " +"dialogs. The Tab or right arrow keys move " +"forward, and the Shift " +"Tab or left arrow keys move " +"backward between displayed buttons and selections. The " +"up and down arrow select different items " +"within a scrollable list, and also scroll the list itself. In addition, in " +"long lists, you can type a letter to cause the list to scroll directly to " +"the section with items starting with the letter you typed and use Pg-" +"Up and Pg-Down to scroll the list in sections. The " +"space bar selects an item such as a checkbox. Use " +"&enterkey; to activate choices." +msgstr "" +"Afişajul obişnuit al mediului de instalare este în mod text (nu în " +"familiarul mediu grafic). Mausul nu funcţionează în acest mediu. Iată " +"tastele care pot fi folosite pentru a vă deplasa în diversele ferestre de " +"dialog: Tab sau săgeata dreapta " +"înaintează, iar Shift " +"Tab sau săgeata stânga " +"deplasează cursorul înapoi între butoanele şi selecţiile " +"afişate. Săgeţile sus şi jos selectează " +"diferitele elemente dintr-o listă derulantă, dar şi defilează lista însăşi. " +"în plus, în listele lungi puteţi scrie o literă pentru a determina derularea " +"listei direct la secţiunea cu elemente care încep cu litera tastată şi " +"puteţi să folosiţi Pg-Up şi Pg-Down pentru " +"a derula lista în secţiuni. Tasta spaţiu selectează elemete " +"precum bife. Folosiţi &enterkey; pentru a activa ce aţi ales." #. Tag: para #: using-d-i.xml:77 #, no-c-format -msgid "S/390 does not support virtual consoles. You may open a second and third ssh session to view the logs described below." -msgstr "S/390 nu are suport pentru console virtuale. Puteţi deschide o a doua sau chiar o a treia sesiune ssh pentru a vedea jurnalele descrise mai jos." +msgid "" +"S/390 does not support virtual consoles. You may open a second and third ssh " +"session to view the logs described below." +msgstr "" +"S/390 nu are suport pentru console virtuale. Puteţi deschide o a doua sau " +"chiar o a treia sesiune ssh pentru a vedea jurnalele descrise mai jos." #. Tag: para #: using-d-i.xml:82 #, no-c-format -msgid "Error messages and logs are redirected to the fourth console. You can access this console by pressing Left AltF4 (hold the left Alt key while pressing the F4 function key); get back to the main installer process with Left AltF1." -msgstr "Mesajele de eroare şi jurnalele sunt redirecţionate spre a patra consolă. Puteţi activa această consolă apăsând Alt stângaF4 (ţineţi apăsată tasta Alt stânga în timp ce apăsaţi tasta functionalăF4); vă puteţi întoarce la procesul de instalare cu Alt stângaF1." +msgid "" +"Error messages and logs are redirected to the fourth console. You can access " +"this console by pressing Left AltF4 (hold the left Alt key while pressing " +"the F4 function key); get back to the main installer " +"process with Left AltF1." +msgstr "" +"Mesajele de eroare şi jurnalele sunt redirecţionate spre a patra consolă. " +"Puteţi activa această consolă apăsând Alt stângaF4 (ţineţi apăsată tasta Alt " +"stânga în timp ce apăsaţi tasta functionalăF4); vă " +"puteţi întoarce la procesul de instalare cu Alt stângaF1." #. Tag: para #: using-d-i.xml:92 #, no-c-format -msgid "These messages can also be found in /var/log/syslog. After installation, this log is copied to /var/log/installer/syslog on your new system. Other installation messages may be found in /var/log/ during the installation, and /var/log/installer/ after the computer has been booted into the installed system." -msgstr "Aceste mesaje pot fi găsite şi în /var/log/syslog. După instalare, acest jurnal este copiat în /var/log/installer/syslog pe noul sistem. Alte mesaje de la instalare pot fi găsite în /var/log/ în timpul instalării şi în /var/log/installer/ după ce calculatorul a pornit în sistemul instalat." +msgid "" +"These messages can also be found in /var/log/syslog. " +"After installation, this log is copied to /var/log/installer/" +"syslog on your new system. Other installation messages may be " +"found in /var/log/ during the installation, and " +"/var/log/installer/ after the computer has been booted " +"into the installed system." +msgstr "" +"Aceste mesaje pot fi găsite şi în /var/log/syslog. După " +"instalare, acest jurnal este copiat în /var/log/installer/syslog pe noul sistem. Alte mesaje de la instalare pot fi găsite în " +"/var/log/ în timpul instalării şi în /var/log/" +"installer/ după ce calculatorul a pornit în sistemul instalat." #. Tag: title #: using-d-i.xml:106 @@ -96,8 +222,15 @@ msgstr "Componentele - Introducere" #. Tag: para #: using-d-i.xml:107 #, no-c-format -msgid "Here is a list of installer components with a brief description of each component's purpose. Details you might need to know about using a particular component are in ." -msgstr "Iată o listă a componetelor programului de instalare cu descrieri sumare ale scopurilor lor. Dacă aveţi nevoie să aflaţi mai multe detalii legate de utilizarea unei anumite componente le puteţi găsi în ." +msgid "" +"Here is a list of installer components with a brief description of each " +"component's purpose. Details you might need to know about using a particular " +"component are in ." +msgstr "" +"Iată o listă a componetelor programului de instalare cu descrieri sumare ale " +"scopurilor lor. Dacă aveţi nevoie să aflaţi mai multe detalii legate de " +"utilizarea unei anumite componente le puteţi găsi în ." #. Tag: term #: using-d-i.xml:118 @@ -108,14 +241,33 @@ msgstr "meniul principal" #. Tag: para #: using-d-i.xml:118 #, no-c-format -msgid "Shows the list of components to the user during installer operation, and starts a component when it is selected. Main-menu's questions are set to priority medium, so if your priority is set to high or critical (high is the default), you will not see the menu. On the other hand, if there is an error which requires your intervention, the question priority may be downgraded temporarily to allow you to resolve the problem, and in that case the menu may appear." -msgstr "Afişează utilizatorului lista componentelor în timpul operării programului de instalare si porneşte o componentă când este selectată. Întrebările meniului princial au prioritatea medie, deci, în cazul în care aveţi prioritatea înaltă sau critică (înaltă este implicită), nu veţi vedea meniul. Pe de altă parte, dacă aprare o eroare care necesită intervenţia dumneavoastră, este posibil ca prioritatea să fie coborâtă temporar pentru a vă permite să rezolvaţi problema în cauză, deci, în acest caz, este posibil să apară meniul." +msgid "" +"Shows the list of components to the user during installer operation, and " +"starts a component when it is selected. Main-menu's questions are set to " +"priority medium, so if your priority is set to high or critical (high is the " +"default), you will not see the menu. On the other hand, if there is an error " +"which requires your intervention, the question priority may be downgraded " +"temporarily to allow you to resolve the problem, and in that case the menu " +"may appear." +msgstr "" +"Afişează utilizatorului lista componentelor în timpul operării programului " +"de instalare si porneşte o componentă când este selectată. Întrebările " +"meniului princial au prioritatea medie, deci, în cazul în care aveţi " +"prioritatea înaltă sau critică (înaltă este implicită), nu veţi vedea " +"meniul. Pe de altă parte, dacă aprare o eroare care necesită intervenţia " +"dumneavoastră, este posibil ca prioritatea să fie coborâtă temporar pentru a " +"vă permite să rezolvaţi problema în cauză, deci, în acest caz, este posibil " +"să apară meniul." #. Tag: para #: using-d-i.xml:128 #, no-c-format -msgid "You can get to the main menu by selecting the Back button repeatedly to back all the way out of the currently running component." -msgstr "Puteţi ajunge la meniul principal prin selectarea butonului Înapoi repetat până la ieşirea din componenta care rulează la acel moment." +msgid "" +"You can get to the main menu by selecting the Back button " +"repeatedly to back all the way out of the currently running component." +msgstr "" +"Puteţi ajunge la meniul principal prin selectarea butonului Înapoi repetat până la ieşirea din componenta care rulează la acel moment." #. Tag: term #: using-d-i.xml:137 @@ -126,8 +278,17 @@ msgstr "alegătorul de locală - localechooser" #. Tag: para #: using-d-i.xml:137 #, no-c-format -msgid "Allows the user to select localization options for the installation and the installed system: language, country and locales. The installer will display messages in the selected language, unless the translation for that language is not complete in which case some messages may be shown in English." -msgstr "Permite utilizatorului să selecteze opţiuni de localizare pentru sistemul de instalare şi pentru cel instalat: limba, ţara şi localele. Programul de instalare va afişa mesajele în limba selectată, doar dacă nu se întâmplă ca traducerea pentru acea limbă să nu fie completă, caz în care mesajele ar putea fi afişate în engleză." +msgid "" +"Allows the user to select localization options for the installation and the " +"installed system: language, country and locales. The installer will display " +"messages in the selected language, unless the translation for that language " +"is not complete in which case some messages may be shown in English." +msgstr "" +"Permite utilizatorului să selecteze opţiuni de localizare pentru sistemul de " +"instalare şi pentru cel instalat: limba, ţara şi localele. Programul de " +"instalare va afişa mesajele în limba selectată, doar dacă nu se întâmplă ca " +"traducerea pentru acea limbă să nu fie completă, caz în care mesajele ar " +"putea fi afişate în engleză." #. Tag: term #: using-d-i.xml:149 @@ -138,8 +299,12 @@ msgstr "alegătorul de tastaură - kbd-chooser" #. Tag: para #: using-d-i.xml:149 #, no-c-format -msgid "Shows a list of keyboards, from which the user chooses the model which matches his own." -msgstr "Afişează o listă de tastaturi din care utilizatorul alege medelul care se potriveşte care se potriveşte cu a lui." +msgid "" +"Shows a list of keyboards, from which the user chooses the model which " +"matches his own." +msgstr "" +"Afişează o listă de tastaturi din care utilizatorul alege medelul care se " +"potriveşte care se potriveşte cu a lui." #. Tag: term #: using-d-i.xml:158 @@ -150,8 +315,12 @@ msgstr "detectorul de hardware - hw-detect" #. Tag: para #: using-d-i.xml:158 #, no-c-format -msgid "Automatically detects most of the system's hardware, including network cards, disk drives, and PCMCIA." -msgstr "Detectează automat cele mai multe dintre componentele sistemului, inclusiv plăcile de reţea, discurile şi PCMCIA." +msgid "" +"Automatically detects most of the system's hardware, including network " +"cards, disk drives, and PCMCIA." +msgstr "" +"Detectează automat cele mai multe dintre componentele sistemului, inclusiv " +"plăcile de reţea, discurile şi PCMCIA." #. Tag: term #: using-d-i.xml:167 @@ -174,21 +343,26 @@ msgstr "configuratorul de reţea - netcfg" #. Tag: para #: using-d-i.xml:175 #, no-c-format -msgid "Configures the computer's network connections so it can communicate over the internet." -msgstr "Configurează conexiunile la reţea ale calculatorului pentru a putea comunica prin internet." +msgid "" +"Configures the computer's network connections so it can communicate over the " +"internet." +msgstr "" +"Configurează conexiunile la reţea ale calculatorului pentru a putea " +"comunica prin internet." #. Tag: term #: using-d-i.xml:184 -#, no-c-format -#, fuzzy +#, fuzzy, no-c-format msgid "iso-scan" msgstr "iso-scan" #. Tag: para #: using-d-i.xml:184 #, no-c-format -msgid "Looks for ISO file systems, which may be on a CD-ROM or on the hard drive." -msgstr "Cauta sisteme de fişiere ISO care ar putea fi pe un CD sau pe discul fix." +msgid "" +"Looks for ISO file systems, which may be on a CD-ROM or on the hard drive." +msgstr "" +"Cauta sisteme de fişiere ISO care ar putea fi pe un CD sau pe discul fix." #. Tag: term #: using-d-i.xml:193 @@ -199,8 +373,12 @@ msgstr "alegătorul de arhive - choose-mirror" #. Tag: para #: using-d-i.xml:193 #, no-c-format -msgid "Presents a list of Debian archive mirrors. The user may choose the source of his installation packages." -msgstr "Prezintă o listă situri cu arhivele Debian. Utilizatorul poate alege sursa pachetelor pe care le instalează." +msgid "" +"Presents a list of Debian archive mirrors. The user may choose the source of " +"his installation packages." +msgstr "" +"Prezintă o listă situri cu arhivele Debian. Utilizatorul poate alege sursa " +"pachetelor pe care le instalează." #. Tag: term #: using-d-i.xml:202 @@ -211,8 +389,12 @@ msgstr "verificatorul de CD-uri - cdrom-checker" #. Tag: para #: using-d-i.xml:202 #, no-c-format -msgid "Checks integrity of a CD-ROM. This way the user may assure him/herself that the installation CD-ROM was not corrupted." -msgstr "Verifică integritatea unui CD. În acest fel utilizatorul se poate asigura că CD-ul de instalare nu a fost corupt." +msgid "" +"Checks integrity of a CD-ROM. This way the user may assure him/herself that " +"the installation CD-ROM was not corrupted." +msgstr "" +"Verifică integritatea unui CD. În acest fel utilizatorul se poate asigura că " +"CD-ul de instalare nu a fost corupt." #. Tag: term #: using-d-i.xml:211 @@ -223,8 +405,14 @@ msgstr "memorie scăzută - lowmem" #. Tag: para #: using-d-i.xml:211 #, no-c-format -msgid "Lowmem tries to detect systems with low memory and then does various tricks to remove unnecessary parts of &d-i; from the memory (at the cost of some features)." -msgstr "Lowmem încearcă să detecteze sistemele cu memorie puţină şi apoi face diverse trucuri pentru a înlătura părţi nenecesare ale lui &d-i; din memorie (sacrificând câteva din facilităţi)." +msgid "" +"Lowmem tries to detect systems with low memory and then does various tricks " +"to remove unnecessary parts of &d-i; from the memory (at the cost of some " +"features)." +msgstr "" +"Lowmem încearcă să detecteze sistemele cu memorie puţină şi apoi face " +"diverse trucuri pentru a înlătura părţi nenecesare ale lui &d-i; din memorie " +"(sacrificând câteva din facilităţi)." #. Tag: term #: using-d-i.xml:221 @@ -235,8 +423,12 @@ msgstr "anna" #. Tag: para #: using-d-i.xml:221 #, no-c-format -msgid "Anna's Not Nearly APT. Installs packages which have been retrieved from the chosen mirror or CD." -msgstr "Anna Nu-i Nicidecum APT. Instalează pachetele care au fost preluate de pe arhiva aleasă sau de pe CD." +msgid "" +"Anna's Not Nearly APT. Installs packages which have been retrieved from the " +"chosen mirror or CD." +msgstr "" +"Anna Nu-i Nicidecum APT. Instalează pachetele care au fost preluate de pe " +"arhiva aleasă sau de pe CD." #. Tag: term #: using-d-i.xml:230 @@ -247,8 +439,17 @@ msgstr "managerul de partiţii - partman" #. Tag: para #: using-d-i.xml:230 #, no-c-format -msgid "Allows the user to partition disks attached to the system, create file systems on the selected partitions, and attach them to the mountpoints. Included are also interesting features like a fully automatic mode or LVM support. This is the preferred partitioning tool in Debian." -msgstr "Permite utilizatorului să partiţioneze discurile ataşate la sistem, creează sisteme de fişiere pe partiţiile selectate şi le ataşează la punctele de montare. Sunt incluse şi facilităţi interesante precum modul complet automatizat sau suportul pentru LVM. Acesta este unealta de partiţionare preferată în Debian." +msgid "" +"Allows the user to partition disks attached to the system, create file " +"systems on the selected partitions, and attach them to the mountpoints. " +"Included are also interesting features like a fully automatic mode or LVM " +"support. This is the preferred partitioning tool in Debian." +msgstr "" +"Permite utilizatorului să partiţioneze discurile ataşate la sistem, creează " +"sisteme de fişiere pe partiţiile selectate şi le ataşează la punctele de " +"montare. Sunt incluse şi facilităţi interesante precum modul complet " +"automatizat sau suportul pentru LVM. Acesta este unealta de partiţionare " +"preferată în Debian." #. Tag: term #: using-d-i.xml:242 @@ -259,8 +460,11 @@ msgstr "autopartkit" #. Tag: para #: using-d-i.xml:242 #, no-c-format -msgid "Automatically partitions an entire disk according to preset user preferences." -msgstr "Partiţionează automat un disc întreg în conformitate cu preferinţe preconfigurate ale utilizatorului." +msgid "" +"Automatically partitions an entire disk according to preset user preferences." +msgstr "" +"Partiţionează automat un disc întreg în conformitate cu preferinţe " +"preconfigurate ale utilizatorului." #. Tag: term #: using-d-i.xml:251 @@ -271,8 +475,13 @@ msgstr "partiţionatorul - partitioner" #. Tag: para #: using-d-i.xml:251 #, no-c-format -msgid "Allows the user to partition disks attached to the system. A partitioning program appropriate to your computer's architecture is chosen." -msgstr "Permite utilizatorului să partiţioneze discurile ataşate la sistem. Este ales un program de partiţionare potrivit arhitecturii calculatorului dumneavoastră." +msgid "" +"Allows the user to partition disks attached to the system. A partitioning " +"program appropriate to your computer's architecture is chosen." +msgstr "" +"Permite utilizatorului să partiţioneze discurile ataşate la sistem. Este " +"ales un program de partiţionare potrivit arhitecturii calculatorului " +"dumneavoastră." #. Tag: term #: using-d-i.xml:261 @@ -283,8 +492,12 @@ msgstr "configuratorul de partiţii - partconf" #. Tag: para #: using-d-i.xml:261 #, no-c-format -msgid "Displays a list of partitions, and creates file systems on the selected partitions according to user instructions." -msgstr "Afişează o listă de partiţii şi creează sisteme de fisiere pe partiţiile selectatate, conform cu instrucţiunile utlilizatorului." +msgid "" +"Displays a list of partitions, and creates file systems on the selected " +"partitions according to user instructions." +msgstr "" +"Afişează o listă de partiţii şi creează sisteme de fisiere pe partiţiile " +"selectatate, conform cu instrucţiunile utlilizatorului." #. Tag: term #: using-d-i.xml:270 @@ -295,8 +508,12 @@ msgstr "configuratorul LVM - lvmcfg" #. Tag: para #: using-d-i.xml:270 #, no-c-format -msgid "Helps the user with the configuration of the LVM (Logical Volume Manager)." -msgstr "Ajută utilizatorul la configurarea LVM (managerul de volume logice)." +msgid "" +"Helps the user with the configuration of the LVM " +"(Logical Volume Manager)." +msgstr "" +"Ajută utilizatorul la configurarea LVM (managerul de " +"volume logice)." #. Tag: term #: using-d-i.xml:279 @@ -307,8 +524,15 @@ msgstr "configuratorul md - mdcfg" #. Tag: para #: using-d-i.xml:279 #, no-c-format -msgid "Allows the user to setup Software RAID (Redundant Array of Inexpensive Disks). This Software RAID is usually superior to the cheap IDE (pseudo hardware) RAID controllers found on newer motherboards." -msgstr "Permite utilizatorului să configureze RAID-ul (matrice redundantă de discuri ieftine) software. Acest RAID software este, de obicei, superior faţă de controlere RAID IDE ieftine (pseudo-hardware) găsite pe plăcile de bază mai noi." +msgid "" +"Allows the user to setup Software RAID (Redundant " +"Array of Inexpensive Disks). This Software RAID is usually superior to the " +"cheap IDE (pseudo hardware) RAID controllers found on newer motherboards." +msgstr "" +"Permite utilizatorului să configureze RAID-ul " +"(matrice redundantă de discuri ieftine) software. Acest RAID software este, " +"de obicei, superior faţă de controlere RAID IDE ieftine (pseudo-hardware) " +"găsite pe plăcile de bază mai noi." #. Tag: term #: using-d-i.xml:290 @@ -355,8 +579,12 @@ msgstr "instalatorul bazei - base-installer" #. Tag: para #: using-d-i.xml:314 #, no-c-format -msgid "Installs the most basic set of packages which would allow the computer to operate under Linux when rebooted." -msgstr "Instalează un set de pachete de bază care ar permite calculatorului să opereze în Linux după ce va fi repornit." +msgid "" +"Installs the most basic set of packages which would allow the computer to " +"operate under Linux when rebooted." +msgstr "" +"Instalează un set de pachete de bază care ar permite calculatorului să " +"opereze în Linux după ce va fi repornit." #. Tag: term #: using-d-i.xml:323 @@ -367,8 +595,12 @@ msgstr "pregătitorul apt - apt-setup" #. Tag: para #: using-d-i.xml:323 #, no-c-format -msgid "Configures apt, mostly automatically, based on what media the installer is running from." -msgstr "Configurează apt, în mare parte automat, bazat pe mediul de pe care rulează mediul de instalare." +msgid "" +"Configures apt, mostly automatically, based on what media the installer is " +"running from." +msgstr "" +"Configurează apt, în mare parte automat, bazat pe mediul de pe care rulează " +"mediul de instalare." #. Tag: term #: using-d-i.xml:332 @@ -379,8 +611,12 @@ msgstr "selectorul de pachete - pkgsel" #. Tag: para #: using-d-i.xml:332 #, no-c-format -msgid "Uses tasksel to select and install additional software." -msgstr "Foloseşte tasksel pentru a selecta şi instala programe adiţionale." +msgid "" +"Uses tasksel to select and install additional " +"software." +msgstr "" +"Foloseşte tasksel pentru a selecta şi instala " +"programe adiţionale." #. Tag: term #: using-d-i.xml:340 @@ -391,8 +627,18 @@ msgstr "testorul de sisteme de operare - os-prober" #. Tag: para #: using-d-i.xml:340 #, no-c-format -msgid "Detects currently installed operating systems on the computer and passes this information to the bootloader-installer, which may offer you an ability to add discovered operating systems to the bootloader's start menu. This way the user could easily choose at the boot time which operating system to start." -msgstr "Detectează sistemele de operare instalate deja pe calculator şi pasează această informaţie către instalatorul de încărcător de sistem, care vă poate oferi posibilitatea să adăugaţi sistemele de operare descoperite la meniul de pornire a încărcătorului de sistem. În acest fel utilizatorul poate alege cu usurinţă, la pornire, sistemul de operare care să fie pornit." +msgid "" +"Detects currently installed operating systems on the computer and passes " +"this information to the bootloader-installer, which may offer you an ability " +"to add discovered operating systems to the bootloader's start menu. This way " +"the user could easily choose at the boot time which operating system to " +"start." +msgstr "" +"Detectează sistemele de operare instalate deja pe calculator şi pasează " +"această informaţie către instalatorul de încărcător de sistem, care vă poate " +"oferi posibilitatea să adăugaţi sistemele de operare descoperite la meniul " +"de pornire a încărcătorului de sistem. În acest fel utilizatorul poate alege " +"cu usurinţă, la pornire, sistemul de operare care să fie pornit." #. Tag: term #: using-d-i.xml:352 @@ -403,8 +649,16 @@ msgstr "instalatorul de încărcător de sistem - bootloader-installer" #. Tag: para #: using-d-i.xml:352 #, no-c-format -msgid "The various bootloader installers each install a boot loader program on the hard disk, which is necessary for the computer to start up using Linux without using a floppy or CD-ROM. Many boot loaders allow the user to choose an alternate operating system each time the computer boots." -msgstr "Diversele instalatoare de încărcătoare de sistem instalează pe discul fix un program, lucru care permite pornirea sistemului în Linux fără a folosi o dischetă sau un CD. Multe încărcătoare de sistem permit utilizatorului să aleagă " +msgid "" +"The various bootloader installers each install a boot loader program on the " +"hard disk, which is necessary for the computer to start up using Linux " +"without using a floppy or CD-ROM. Many boot loaders allow the user to choose " +"an alternate operating system each time the computer boots." +msgstr "" +"Diversele instalatoare de încărcătoare de sistem instalează pe discul fix un " +"program, lucru care permite pornirea sistemului în Linux fără a folosi o " +"dischetă sau un CD. Multe încărcătoare de sistem permit utilizatorului să " +"aleagă " #. Tag: term #: using-d-i.xml:363 @@ -415,7 +669,8 @@ msgstr "" #. Tag: para #: using-d-i.xml:363 #, no-c-format -msgid "Allows the user to execute a shell from the menu, or in the second console." +msgid "" +"Allows the user to execute a shell from the menu, or in the second console." msgstr "" #. Tag: term @@ -427,7 +682,10 @@ msgstr "" #. Tag: para #: using-d-i.xml:372 #, no-c-format -msgid "Provides a way for the user to record information on a floppy disk, network, hard disk, or other media when trouble is encountered, in order to accurately report installer software problems to Debian developers later." +msgid "" +"Provides a way for the user to record information on a floppy disk, network, " +"hard disk, or other media when trouble is encountered, in order to " +"accurately report installer software problems to Debian developers later." msgstr "" #. Tag: title @@ -439,7 +697,13 @@ msgstr "" #. Tag: para #: using-d-i.xml:391 #, no-c-format -msgid "In this section we will describe each installer component in detail. The components have been grouped into stages that should be recognizable for users. They are presented in the order they appear during the install. Note that not all modules will be used for every installation; which modules are actually used depends on the installation method you use and on your hardware." +msgid "" +"In this section we will describe each installer component in detail. The " +"components have been grouped into stages that should be recognizable for " +"users. They are presented in the order they appear during the install. Note " +"that not all modules will be used for every installation; which modules are " +"actually used depends on the installation method you use and on your " +"hardware." msgstr "" #. Tag: title @@ -451,13 +715,27 @@ msgstr "" #. Tag: para #: using-d-i.xml:404 #, no-c-format -msgid "Let's assume the Debian Installer has booted and you are facing its first screen. At this time, the capabilities of &d-i; are still quite limited. It doesn't know much about your hardware, preferred language, or even the task it should perform. Don't worry. Because &d-i; is quite clever, it can automatically probe your hardware, locate the rest of its components and upgrade itself to a capable installation system. However, you still need to help &d-i; with some information it can't determine automatically (like selecting your preferred language, keyboard layout or desired network mirror)." +msgid "" +"Let's assume the Debian Installer has booted and you are facing its first " +"screen. At this time, the capabilities of &d-i; are still quite limited. It " +"doesn't know much about your hardware, preferred language, or even the task " +"it should perform. Don't worry. Because &d-i; is quite clever, it can " +"automatically probe your hardware, locate the rest of its components and " +"upgrade itself to a capable installation system. However, you still need to " +"help &d-i; with some information it can't determine automatically (like " +"selecting your preferred language, keyboard layout or desired network " +"mirror)." msgstr "" #. Tag: para #: using-d-i.xml:417 #, no-c-format -msgid "You will notice that &d-i; performs hardware detection several times during this stage. The first time is targeted specifically at the hardware needed to load installer components (e.g. your CD-ROM or network card). As not all drivers may be available during this first run, hardware detection needs to be repeated later in the process." +msgid "" +"You will notice that &d-i; performs hardware detection several times during this stage. The first time is targeted " +"specifically at the hardware needed to load installer components (e.g. your " +"CD-ROM or network card). As not all drivers may be available during this " +"first run, hardware detection needs to be repeated later in the process." msgstr "" #. Tag: title @@ -469,13 +747,20 @@ msgstr "" #. Tag: para #: using-d-i.xml:434 #, no-c-format -msgid "One of the first things &d-i; does, is to check available memory. If the available memory is limited, this component will make some changes in the installation process which hopefully will allow you to install &debian; on your system." +msgid "" +"One of the first things &d-i; does, is to check available memory. If the " +"available memory is limited, this component will make some changes in the " +"installation process which hopefully will allow you to install &debian; on " +"your system." msgstr "" #. Tag: para #: using-d-i.xml:441 #, no-c-format -msgid "During a low memory install, not all components will be available. One of the limitations is that you won't be able to choose a language for the installation." +msgid "" +"During a low memory install, not all components will be available. One of " +"the limitations is that you won't be able to choose a language for the " +"installation." msgstr "" #. Tag: title @@ -487,37 +772,70 @@ msgstr "" #. Tag: para #: using-d-i.xml:458 #, no-c-format -msgid "In most cases the first questions you will be asked concern the selection of localization options to be used both for the installation and for the installed system. The localization options consist of language, country and locales." +msgid "" +"In most cases the first questions you will be asked concern the selection of " +"localization options to be used both for the installation and for the " +"installed system. The localization options consist of language, country and " +"locales." msgstr "" #. Tag: para #: using-d-i.xml:465 #, no-c-format -msgid "The language you choose will be used for the rest of the installation process, provided a translation of the different dialogs is available. If no valid translation is available for the selected language, the installer will default to English." +msgid "" +"The language you choose will be used for the rest of the installation " +"process, provided a translation of the different dialogs is available. If no " +"valid translation is available for the selected language, the installer will " +"default to English." msgstr "" #. Tag: para #: using-d-i.xml:472 #, no-c-format -msgid "The selected country will be used later in the installation process to pick the default timezone and a Debian mirror appropriate for your geographic location. Language and country together will be used to set the default locale for your system and to help select your keyboard." +msgid "" +"The selected country will be used later in the installation process to pick " +"the default timezone and a Debian mirror appropriate for your geographic " +"location. Language and country together will be used to set the default " +"locale for your system and to help select your keyboard." msgstr "" #. Tag: para #: using-d-i.xml:479 #, no-c-format -msgid "You will first be asked to select your preferred language. The language names are listed in both English (left side) and in the language itself (right side); the names on the right side are also shown in the proper script for the language. The list is sorted on the English names. At the top of the list is an extra option that allows you to select the C locale instead of a language. Choosing the C locale will result in the installation proceding in English; the installed system will have no localization support as the locales package will not be installed." +msgid "" +"You will first be asked to select your preferred language. The language " +"names are listed in both English (left side) and in the language itself " +"(right side); the names on the right side are also shown in the proper " +"script for the language. The list is sorted on the English names. At the top " +"of the list is an extra option that allows you to select the C locale instead of a language. Choosing the C locale " +"will result in the installation proceding in English; the installed system " +"will have no localization support as the locales " +"package will not be installed." msgstr "" #. Tag: para #: using-d-i.xml:491 #, no-c-format -msgid "If you selected a language that is recognized as an official language for more than one country In technical terms: where multiple locales exist for that language with differing country codes. , you will next be asked to select a country. If you choose Other at the bottom of the list, you will be presented with a list of all countries, grouped by continent. If the language has only one country associated with it, that country will be selected automatically." +msgid "" +"If you selected a language that is recognized as an official language for " +"more than one country In technical terms: where multiple " +"locales exist for that language with differing country codes. , you will next be asked to select a country. If you choose " +"Other at the bottom of the list, you will be " +"presented with a list of all countries, grouped by continent. If the " +"language has only one country associated with it, that country will be " +"selected automatically." msgstr "" #. Tag: para #: using-d-i.xml:509 #, no-c-format -msgid "A default locale will be selected based on the selected language and country. If you are installing at medium or low priority, you will have the option of selecting a different default locale and of selecting additional locales to be generated for the installed system." +msgid "" +"A default locale will be selected based on the selected language and " +"country. If you are installing at medium or low priority, you will have the " +"option of selecting a different default locale and of selecting additional " +"locales to be generated for the installed system." msgstr "" #. Tag: title @@ -529,37 +847,75 @@ msgstr "" #. Tag: para #: using-d-i.xml:526 #, no-c-format -msgid "Keyboards are often tailored to the characters used in a language. Select a layout that conforms to the keyboard you are using, or select something close if the keyboard layout you want isn't represented. Once the system installation is complete, you'll be able to select a keyboard layout from a wider range of choices (run kbdconfig as root after you have completed the installation)." +msgid "" +"Keyboards are often tailored to the characters used in a language. Select a " +"layout that conforms to the keyboard you are using, or select something " +"close if the keyboard layout you want isn't represented. Once the system " +"installation is complete, you'll be able to select a keyboard layout from a " +"wider range of choices (run kbdconfig as root after you " +"have completed the installation)." msgstr "" #. Tag: para #: using-d-i.xml:536 #, no-c-format -msgid "Move the highlight to the keyboard selection you desire and press &enterkey;. Use the arrow keys to move the highlight — they are in the same place in all national language keyboard layouts, so they are independent of the keyboard configuration. An 'extended' keyboard is one with F1 through F10 keys along the top row." +msgid "" +"Move the highlight to the keyboard selection you desire and press " +"&enterkey;. Use the arrow keys to move the highlight — they are in the " +"same place in all national language keyboard layouts, so they are " +"independent of the keyboard configuration. An 'extended' keyboard is one " +"with F1 through F10 keys along the top row." msgstr "" #. Tag: para #: using-d-i.xml:545 #, no-c-format -msgid "On DECstations there is currently no loadable keymap available, so you have to skip the keyboard selection and keep the default kernel keymap (LK201 US). This may change in the future as it depends on further Linux/MIPS kernel development." +msgid "" +"On DECstations there is currently no loadable keymap available, so you have " +"to skip the keyboard selection and keep the default kernel keymap (LK201 " +"US). This may change in the future as it depends on further Linux/MIPS " +"kernel development." msgstr "" #. Tag: para #: using-d-i.xml:552 #, no-c-format -msgid "There are two keyboard layouts for US keyboards; the qwerty/mac-usb-us (Apple USB) layout will place the Alt function on the Command/Apple key (in the keyboard position next to the space key similar to Alt on PC keyboards), while the qwerty/us (Standard) layout will place the Alt function on the Option key (engraved with 'alt' on most Mac keyboards). In other respects the two layouts are similar." +msgid "" +"There are two keyboard layouts for US keyboards; the qwerty/mac-usb-us " +"(Apple USB) layout will place the Alt function on the Command/Apple key (in the keyboard position next to the space key " +"similar to Alt on PC keyboards), while the qwerty/us " +"(Standard) layout will place the Alt function on the Option " +"key (engraved with 'alt' on most Mac keyboards). In other respects the two " +"layouts are similar." msgstr "" #. Tag: para #: using-d-i.xml:564 #, no-c-format -msgid "If you are installing on a system that has a Sun USB keyboard and have booted the installer with the default 2.4 kernel, the keyboard will not be identified correctly by the installation system. The installer will show you a list of Sun type keymaps to choose from, but selecting one of these will result in a non-working keyboard. If you are installing with the 2.6 kernel, there is no problem." +msgid "" +"If you are installing on a system that has a Sun USB keyboard and have " +"booted the installer with the default 2.4 kernel, the keyboard will not be " +"identified correctly by the installation system. The installer will show you " +"a list of Sun type keymaps to choose from, but selecting one of these will " +"result in a non-working keyboard. If you are installing with the 2.6 kernel, " +"there is no problem." msgstr "" #. Tag: para #: using-d-i.xml:573 #, no-c-format -msgid "To get a working keyboard, you should boot the installer with parameter priority=medium. When you get to keyboard selection If you are installing at default priority you should use the Go Back button to return to the installer menu when you are shown the list of Sun type keymaps. , choose No keyboard to configure if you have a keyboard with an American (US) layout, or choose USB keyboard if you have a keyboard with a localized layout. Selecting No keyboard to configure will leave the kernel keymap in place, which is correct for US keyboards." +msgid "" +"To get a working keyboard, you should boot the installer with parameter " +"priority=medium. When you get to keyboard " +"selection If you are installing at default priority you " +"should use the Go Back button to return to the " +"installer menu when you are shown the list of Sun type keymaps. , choose No keyboard to configure if you have a " +"keyboard with an American (US) layout, or choose USB keyboard " +"if you have a keyboard with a localized layout. Selecting No keyboard " +"to configure will leave the kernel keymap in place, which is correct " +"for US keyboards." msgstr "" #. Tag: title @@ -571,25 +927,51 @@ msgstr "" #. Tag: para #: using-d-i.xml:612 #, no-c-format -msgid "When installing via the hd-media method, there will be a moment where you need to find and mount the Debian Installer iso image in order to get the rest of the installation files. The component iso-scan does exactly this." +msgid "" +"When installing via the hd-media method, there will be " +"a moment where you need to find and mount the Debian Installer iso image in " +"order to get the rest of the installation files. The component iso-" +"scan does exactly this." msgstr "" #. Tag: para #: using-d-i.xml:619 #, no-c-format -msgid "At first, iso-scan automatically mounts all block devices (e.g. partitions) which have some known filesystem on them and sequentially searches for filenames ending with .iso (or .ISO for that matter). Beware that the first attempt scans only files in the root directory and in the first level of subdirectories (i.e. it finds /whatever.iso, /data/whatever.iso, but not /data/tmp/whatever.iso). After an iso image has been found, iso-scan checks its content to determine if the image is a valid Debian iso image or not. In the former case we are done, in the latter iso-scan seeks for another image." +msgid "" +"At first, iso-scan automatically mounts all block devices " +"(e.g. partitions) which have some known filesystem on them and sequentially " +"searches for filenames ending with .iso (or ." +"ISO for that matter). Beware that the first attempt scans only " +"files in the root directory and in the first level of subdirectories (i.e. " +"it finds /whatever.iso, " +"/data/whatever.iso, but not " +"/data/tmp/whatever.iso). " +"After an iso image has been found, iso-scan checks its " +"content to determine if the image is a valid Debian iso image or not. In the " +"former case we are done, in the latter iso-scan seeks for " +"another image." msgstr "" #. Tag: para #: using-d-i.xml:636 #, no-c-format -msgid "In case the previous attempt to find an installer iso image fails, iso-scan will ask you whether you would like to perform a more thorough search. This pass doesn't just look into the topmost directories, but really traverses whole filesystem." +msgid "" +"In case the previous attempt to find an installer iso image fails, " +"iso-scan will ask you whether you would like to perform a " +"more thorough search. This pass doesn't just look into the topmost " +"directories, but really traverses whole filesystem." msgstr "" #. Tag: para #: using-d-i.xml:643 #, no-c-format -msgid "If iso-scan does not discover your installer iso image, reboot back to your original operating system and check if the image is named correctly (ending in .iso), if it is placed on a filesystem recognizable by &d-i;, and if it is not corrupted (verify the checksum). Experienced Unix users could do this without rebooting on the second console." +msgid "" +"If iso-scan does not discover your installer iso image, " +"reboot back to your original operating system and check if the image is " +"named correctly (ending in .iso), if it is placed on a " +"filesystem recognizable by &d-i;, and if it is not corrupted (verify the " +"checksum). Experienced Unix users could do this without rebooting on the " +"second console." msgstr "" #. Tag: title @@ -601,25 +983,58 @@ msgstr "" #. Tag: para #: using-d-i.xml:666 #, no-c-format -msgid "As you enter this step, if the system detects that you have more than one network device, you'll be asked to choose which device will be your primary network interface, i.e. the one which you want to use for installation. The other interfaces won't be configured at this time. You may configure additional interfaces after installation is complete; see the interfaces 5 man page." +msgid "" +"As you enter this step, if the system detects that you have more than one " +"network device, you'll be asked to choose which device will be your " +"primary network interface, i.e. the one which you want " +"to use for installation. The other interfaces won't be configured at this " +"time. You may configure additional interfaces after installation is " +"complete; see the interfaces " +"5 man page." msgstr "" #. Tag: para #: using-d-i.xml:677 #, no-c-format -msgid "By default, &d-i; tries to configure your computer's network automatically via DHCP. If the DHCP probe succeeds, you are done. If the probe fails, it may be caused by many factors ranging from unplugged network cable, to a misconfigured DHCP setup. Or maybe you don't have a DHCP server in your local network at all. For further explanation check the error messages on the third console. In any case, you will be asked if you want to retry, or if you want to perform manual setup. DHCP servers are sometimes really slow in their responses, so if you are sure everything is in place, try again." +msgid "" +"By default, &d-i; tries to configure your computer's network automatically " +"via DHCP. If the DHCP probe succeeds, you are done. If the probe fails, it " +"may be caused by many factors ranging from unplugged network cable, to a " +"misconfigured DHCP setup. Or maybe you don't have a DHCP server in your " +"local network at all. For further explanation check the error messages on " +"the third console. In any case, you will be asked if you want to retry, or " +"if you want to perform manual setup. DHCP servers are sometimes really slow " +"in their responses, so if you are sure everything is in place, try again." msgstr "" #. Tag: para #: using-d-i.xml:689 #, no-c-format -msgid "The manual network setup in turn asks you a number of questions about your network, notably IP address, Netmask, Gateway, Name server addresses, and a Hostname. Moreover, if you have a wireless network interface, you will be asked to provide your Wireless ESSID and a WEP key. Fill in the answers from ." +msgid "" +"The manual network setup in turn asks you a number of questions about your " +"network, notably IP address, " +"Netmask, Gateway, Name server addresses, and " +"a Hostname. Moreover, if you have a " +"wireless network interface, you will be asked to provide your " +"Wireless ESSID and a WEP " +"key. Fill in the answers from ." msgstr "" #. Tag: para #: using-d-i.xml:703 #, no-c-format -msgid "Some technical details you might, or might not, find handy: the program assumes the network IP address is the bitwise-AND of your system's IP address and your netmask. It will guess the broadcast address is the bitwise OR of your system's IP address with the bitwise negation of the netmask. It will also guess your gateway. If you can't find any of these answers, use the system's guesses — you can change them once the system has been installed, if necessary, by editing /etc/network/interfaces. Alternatively, you can install etherconf, which will step you through your network setup." +msgid "" +"Some technical details you might, or might not, find handy: the program " +"assumes the network IP address is the bitwise-AND of your system's IP " +"address and your netmask. It will guess the broadcast address is the bitwise " +"OR of your system's IP address with the bitwise negation of the netmask. It " +"will also guess your gateway. If you can't find any of these answers, use " +"the system's guesses — you can change them once the system has been " +"installed, if necessary, by editing /etc/network/interfaces. Alternatively, you can install etherconf, " +"which will step you through your network setup." msgstr "" #. Tag: title @@ -631,7 +1046,13 @@ msgstr "" #. Tag: para #: using-d-i.xml:743 #, no-c-format -msgid "At this time, after hardware detection has been executed a final time, &d-i; should be at its full strength, customized for the user's needs and ready to do some real work. As the title of this section indicates, the main task of the next few components lies in partitioning your disks, creating filesystems, assigning mountpoints and optionally configuring closely related issues like LVM or RAID devices." +msgid "" +"At this time, after hardware detection has been executed a final time, &d-i; " +"should be at its full strength, customized for the user's needs and ready to " +"do some real work. As the title of this section indicates, the main task of " +"the next few components lies in partitioning your disks, creating " +"filesystems, assigning mountpoints and optionally configuring closely " +"related issues like LVM or RAID devices." msgstr "" #. Tag: title @@ -643,31 +1064,54 @@ msgstr "" #. Tag: para #: using-d-i.xml:767 #, no-c-format -msgid "Now it is time to partition your disks. If you are uncomfortable with partitioning, or just want to know more details, see ." +msgid "" +"Now it is time to partition your disks. If you are uncomfortable with " +"partitioning, or just want to know more details, see ." msgstr "" #. Tag: para #: using-d-i.xml:773 #, no-c-format -msgid "First you will be given the opportunity to automatically partition either an entire drive, or free space on a drive. This is also called guided partitioning. If you do not want to autopartition, choose Manually edit partition table from the menu." +msgid "" +"First you will be given the opportunity to automatically partition either an " +"entire drive, or free space on a drive. This is also called guided partitioning. If you do not want to autopartition, choose " +"Manually edit partition table from the menu." msgstr "" #. Tag: para #: using-d-i.xml:781 #, no-c-format -msgid "If you choose guided partitioning, you may have two options: to create partitions directly on the hard disk (classic method) or to use Logical Volume Management (LVM). In the second case, the installer will create most partitions inside one big partition; the advantage of this method is that partitions inside this big partition can be resized relatively easily later. Note: the option to use LVM may not be available on all architectures." +msgid "" +"If you choose guided partitioning, you may have two options: to create " +"partitions directly on the hard disk (classic method) or to use Logical " +"Volume Management (LVM). In the second case, the installer will create most " +"partitions inside one big partition; the advantage of this method is that " +"partitions inside this big partition can be resized relatively easily later. " +"Note: the option to use LVM may not be available on all architectures." msgstr "" #. Tag: para #: using-d-i.xml:791 #, no-c-format -msgid "If you choose guided partitioning using LVM, it will not be possible to undo changes made in the partition table. This effectively erases all data that is currently on the selected hard disk." +msgid "" +"If you choose guided partitioning using LVM, it will not be possible to undo " +"changes made in the partition table. This effectively erases all data that " +"is currently on the selected hard disk." msgstr "" #. Tag: para #: using-d-i.xml:798 #, no-c-format -msgid "After you choose guided partitioning (either classic or using LVM), you will be able to choose from the schemes listed in the table below. All schemes have their pros and cons, some of which are discussed in . If you are unsure, choose the first one. Bear in mind that guided partitioning needs a certain minimal amount of free space to operate with. If you don't give it at least about 1GB of space (depends on chosen scheme), guided partitioning will fail." +msgid "" +"After you choose guided partitioning (either classic or using LVM), you will " +"be able to choose from the schemes listed in the table below. All schemes " +"have their pros and cons, some of which are discussed in . If you are unsure, choose the first one. Bear in mind " +"that guided partitioning needs a certain minimal amount of free space to " +"operate with. If you don't give it at least about 1GB of space (depends on " +"chosen scheme), guided partitioning will fail." msgstr "" #. Tag: entry @@ -739,31 +1183,46 @@ msgstr "" #. Tag: entry #: using-d-i.xml:835 #, no-c-format -msgid "/, /home, /usr, /var, /tmp, swap" +msgid "" +"/, /home, /usr, /var, /tmp, swap" msgstr "" #. Tag: para #: using-d-i.xml:844 #, no-c-format -msgid "If you choose guided partitioning using LVM, the installer will also create a separate /boot partition. The other partitions, except for the swap partition, will be created inside the LVM partition." +msgid "" +"If you choose guided partitioning using LVM, the installer will also create " +"a separate /boot partition. The other partitions, " +"except for the swap partition, will be created inside the LVM partition." msgstr "" #. Tag: para #: using-d-i.xml:850 #, no-c-format -msgid "If you choose guided partitioning for your IA64 system, there will be an additional partition, formatted as a FAT16 bootable filesystem, for the EFI boot loader. There is also an additional menu item in the formatting menu to manually set up a partition as an EFI boot partition." +msgid "" +"If you choose guided partitioning for your IA64 system, there will be an " +"additional partition, formatted as a FAT16 bootable filesystem, for the EFI " +"boot loader. There is also an additional menu item in the formatting menu to " +"manually set up a partition as an EFI boot partition." msgstr "" #. Tag: para #: using-d-i.xml:858 #, no-c-format -msgid "If you choose guided partitioning for your Alpha system, an additional, unformatted partition will be allocated at the beginning of your disk to reserve this space for the aboot boot loader." +msgid "" +"If you choose guided partitioning for your Alpha system, an additional, " +"unformatted partition will be allocated at the beginning of your disk to " +"reserve this space for the aboot boot loader." msgstr "" #. Tag: para #: using-d-i.xml:864 #, no-c-format -msgid "After selecting a scheme, the next screen will show your new partition table, including information on whether and how partitions will be formatted and where they will be mounted." +msgid "" +"After selecting a scheme, the next screen will show your new partition " +"table, including information on whether and how partitions will be formatted " +"and where they will be mounted." msgstr "" #. Tag: para @@ -786,61 +1245,120 @@ msgid "" " #7 logical 498.8 MB ext3\n" " #8 logical 551.5 MB swap swap\n" " #9 logical 65.8 GB ext2\n" -" This example shows two IDE harddrives divided into several partitions; the first disk has some free space. Each partition line consists of the partition number, its type, size, optional flags, file system, and mountpoint (if any). Note: this particular setup cannot be created using guided partitioning but it does show possible variation that can be achieved using manual partitioning." +" This example shows two IDE harddrives divided " +"into several partitions; the first disk has some free space. Each partition " +"line consists of the partition number, its type, size, optional flags, file " +"system, and mountpoint (if any). Note: this particular setup cannot be " +"created using guided partitioning but it does show possible variation that " +"can be achieved using manual partitioning." msgstr "" #. Tag: para #: using-d-i.xml:883 #, no-c-format -msgid "This concludes the guided partitioning. If you are satisfied with the generated partition table, you can choose Finish partitioning and write changes to disk from the menu to implement the new partition table (as described at the end of this section). If you are not happy, you can choose to Undo changes to partitions and run guided partitioning again, or modify the proposed changes as described below for manual partitioning." +msgid "" +"This concludes the guided partitioning. If you are satisfied with the " +"generated partition table, you can choose Finish partitioning " +"and write changes to disk from the menu to implement the new " +"partition table (as described at the end of this section). If you are not " +"happy, you can choose to Undo changes to partitions and run guided partitioning again, or modify the proposed " +"changes as described below for manual partitioning." msgstr "" #. Tag: para #: using-d-i.xml:893 #, no-c-format -msgid "A similar screen to the one shown just above will be displayed if you choose manual partitioning except that your existing partition table will be shown and without the mount points. How to manually setup your partition table and the usage of partitions by your new Debian system will be covered in the remainder of this section." +msgid "" +"A similar screen to the one shown just above will be displayed if you choose " +"manual partitioning except that your existing partition table will be shown " +"and without the mount points. How to manually setup your partition table and " +"the usage of partitions by your new Debian system will be covered in the " +"remainder of this section." msgstr "" #. Tag: para #: using-d-i.xml:901 #, no-c-format -msgid "If you select a pristine disk which doesn't have neither partitions nor free space on it, you will be offered to create a new partition table (this is needed so you can create new partitions). After this a new line entitled FREE SPACE should appear under the selected disk." +msgid "" +"If you select a pristine disk which doesn't have neither partitions nor free " +"space on it, you will be offered to create a new partition table (this is " +"needed so you can create new partitions). After this a new line entitled " +"FREE SPACE should appear under the selected disk." msgstr "" #. Tag: para #: using-d-i.xml:909 #, no-c-format -msgid "If you select some free space, you will be offered to create new partition. You will have to answer a quick series of questions about its size, type (primary or logical), and location (beginning or end of the free space). After this, you will be presented with detailed overview of your new partition. There are options like mountpoint, mount options, bootable flag, or way of usage. If you don't like the preselected defaults, feel free to change them to your liking. E.g. by selecting the option Use as:, you can choose different filesystem for this partition including the possibility to use the partition for swap, software RAID, LVM, or not use it at all. Other nice feature is the possibility to copy data from existing partition onto this one. When you are satisfied with your new partition, select Done setting up the partition and you will be thrown back to partman's main screen." +msgid "" +"If you select some free space, you will be offered to create new partition. " +"You will have to answer a quick series of questions about its size, type " +"(primary or logical), and location (beginning or end of the free space). " +"After this, you will be presented with detailed overview of your new " +"partition. There are options like mountpoint, mount options, bootable flag, " +"or way of usage. If you don't like the preselected defaults, feel free to " +"change them to your liking. E.g. by selecting the option Use as:" +", you can choose different filesystem for this partition " +"including the possibility to use the partition for swap, software RAID, LVM, " +"or not use it at all. Other nice feature is the possibility to copy data " +"from existing partition onto this one. When you are satisfied with your new " +"partition, select Done setting up the partition " +"and you will be thrown back to partman's main screen." msgstr "" #. Tag: para #: using-d-i.xml:927 #, no-c-format -msgid "If you decide you want to change something about your partition, simply select the partition, which will bring you to the partition configuration menu. Because this is the same screen like when creating a new partition, you can change the same set of options. One thing which might not be very obvious at a first glance is that you can resize the partition by selecting the item displaying the size of the partition. Filesystems known to work are at least fat16, fat32, ext2, ext3 and swap. This menu also allows you to delete a partition." +msgid "" +"If you decide you want to change something about your partition, simply " +"select the partition, which will bring you to the partition configuration " +"menu. Because this is the same screen like when creating a new partition, " +"you can change the same set of options. One thing which might not be very " +"obvious at a first glance is that you can resize the partition by selecting " +"the item displaying the size of the partition. Filesystems known to work are " +"at least fat16, fat32, ext2, ext3 and swap. This menu also allows you to " +"delete a partition." msgstr "" #. Tag: para #: using-d-i.xml:938 #, no-c-format -msgid "Be sure to create at least two partitions: one for the root filesystem (which must be mounted as /) and one for swap. If you forget to mount the root filesystem, partman won't let you continue until you correct this issue." +msgid "" +"Be sure to create at least two partitions: one for the root filesystem (which must be mounted as /) and " +"one for swap. If you forget to mount the root " +"filesystem, partman won't let you continue until you " +"correct this issue." msgstr "" #. Tag: para #: using-d-i.xml:946 #, no-c-format -msgid "If you forget to select and format an EFI boot partition, partman will detect this and will not let you continue until you allocate one." +msgid "" +"If you forget to select and format an EFI boot partition, partman will detect this and will not let you continue until you allocate " +"one." msgstr "" #. Tag: para #: using-d-i.xml:952 #, no-c-format -msgid "Capabilities of partman can be extended with installer modules, but are dependent on your system's architecture. So if you can't see all promised goodies, check if you have loaded all required modules (e.g. partman-ext3, partman-xfs, or partman-lvm)." +msgid "" +"Capabilities of partman can be extended with installer " +"modules, but are dependent on your system's architecture. So if you can't " +"see all promised goodies, check if you have loaded all required modules (e." +"g. partman-ext3, partman-xfs, or " +"partman-lvm)." msgstr "" #. Tag: para #: using-d-i.xml:960 #, no-c-format -msgid "After you are satisfied with partitioning, select Finish partitioning and write changes to disk from the partitioning menu. You will be presented with a summary of changes made to the disks and asked to confirm that the filesystems should be created as requested." +msgid "" +"After you are satisfied with partitioning, select Finish " +"partitioning and write changes to disk from the partitioning " +"menu. You will be presented with a summary of changes made to the disks and " +"asked to confirm that the filesystems should be created as requested." msgstr "" #. Tag: title @@ -852,19 +1370,66 @@ msgstr "" #. Tag: para #: using-d-i.xml:989 #, no-c-format -msgid "If you have more than one harddrive To be honest, you can construct MD device even from partitions residing on single physical drive, but that won't bring you anything useful. in your computer, you can use mdcfg to setup your drives for increased performance and/or better reliability of your data. The result is called Multidisk Device (or after its most famous variant software RAID)." +msgid "" +"If you have more than one harddrive To be honest, you can " +"construct MD device even from partitions residing on single physical drive, " +"but that won't bring you anything useful. in your " +"computer, you can use mdcfg to setup your drives for " +"increased performance and/or better reliability of your data. The result is " +"called Multidisk Device (or after its most famous " +"variant software RAID)." msgstr "" #. Tag: para #: using-d-i.xml:1003 #, no-c-format -msgid "MD is basically a bunch of partitions located on different disks and combined together to form a logical device. This device can then be used like an ordinary partition (i.e. in partman you can format it, assign a mountpoint, etc.)." +msgid "" +"MD is basically a bunch of partitions located on different disks and " +"combined together to form a logical device. This device " +"can then be used like an ordinary partition (i.e. in partman you can format it, assign a mountpoint, etc.)." msgstr "" #. Tag: para #: using-d-i.xml:1011 #, no-c-format -msgid "The benefit you gain depends on a type of a MD device you are creating. Currently supported are: RAID0 Is mainly aimed at performance. RAID0 splits all incoming data into stripes and distributes them equally over each disk in the array. This can increase the speed of read/write operations, but when one of the disks fails, you will loose everything (part of the information is still on the healthy disk(s), the other part was on the failed disk). The typical use for RAID0 is a partition for video editing. RAID1 Is suitable for setups where reliability is the first concern. It consists of several (usually two) equally sized partitions where every partition contains exactly the same data. This essentially means three things. First, if one of your disks fails, you still have the data mirrored on the remaining disks. Second, you can use only a fraction of the available capacity (more precisely, it is the size of the smallest partition in the RAID). Third, file reads are load balanced among the disks, which can improve performance on a server, such as a file server, that tends to be loaded with more disk reads than writes. Optionally you can have a spare disk in the array which will take the place of the failed disk in the case of failure. RAID5 Is a good compromise between speed, reliability and data redundancy. RAID5 splits all incomming data into stripes and distributes them equally on all but one disks (similar to RAID0). Unlike RAID0, RAID5 also computes parity information, which gets written on the remaining disk. The parity disk is not static (that would be called RAID4), but is changing periodically, so the parity information is distributed equally on all disks. When one of the disks fails, the missing part of information can be computed from remaining data and its parity. RAID5 must consist of at least three active partitions. Optionally you can have a spare disk in the array which will take the place of the failed disk in the case of failure. As you can see, RAID5 has similar degree of reliability like RAID1 while achieving less redundancy. On the other hand it might be a bit slower on write operation than RAID0 due to computation of parity information. To sum it up:" +msgid "" +"The benefit you gain depends on a type of a MD device you are creating. " +"Currently supported are: RAID0 Is mainly aimed at performance. RAID0 splits all " +"incoming data into stripes and distributes them " +"equally over each disk in the array. This can increase the speed of read/" +"write operations, but when one of the disks fails, you will loose " +"everything (part of the information is still on the " +"healthy disk(s), the other part was on the failed " +"disk). The typical use for RAID0 is a partition for video " +"editing. RAID1 Is suitable for setups where reliability is the first " +"concern. It consists of several (usually two) equally sized partitions where " +"every partition contains exactly the same data. This essentially means three " +"things. First, if one of your disks fails, you still have the data mirrored " +"on the remaining disks. Second, you can use only a fraction of the available " +"capacity (more precisely, it is the size of the smallest partition in the " +"RAID). Third, file reads are load balanced among the disks, which can " +"improve performance on a server, such as a file server, that tends to be " +"loaded with more disk reads than writes. Optionally you can " +"have a spare disk in the array which will take the place of the failed disk " +"in the case of failure. " +"RAID5 Is a good compromise between speed, " +"reliability and data redundancy. RAID5 splits all incomming data into " +"stripes and distributes them equally on all but one disks (similar to " +"RAID0). Unlike RAID0, RAID5 also computes parity " +"information, which gets written on the remaining disk. The parity disk is " +"not static (that would be called RAID4), but is changing periodically, so " +"the parity information is distributed equally on all disks. When one of the " +"disks fails, the missing part of information can be computed from remaining " +"data and its parity. RAID5 must consist of at least three active partitions. " +"Optionally you can have a spare disk in the array which will take the place " +"of the failed disk in the case of failure. As you can see, " +"RAID5 has similar degree of reliability like RAID1 while achieving less " +"redundancy. On the other hand it might be a bit slower on write operation " +"than RAID0 due to computation of parity information. To sum it up:" msgstr "" #. Tag: entry @@ -960,61 +1525,106 @@ msgstr "" #. Tag: entry #: using-d-i.xml:1119 #, no-c-format -msgid "Size of the smallest partition multiplied by (number of devices in RAID minus one)" +msgid "" +"Size of the smallest partition multiplied by (number of devices in RAID " +"minus one)" msgstr "" #. Tag: para #: using-d-i.xml:1127 #, no-c-format -msgid "If you want to know the whole truth about Software RAID, have a look at Software RAID HOWTO." +msgid "" +"If you want to know the whole truth about Software RAID, have a look at " +"Software RAID HOWTO." msgstr "" #. Tag: para #: using-d-i.xml:1132 #, no-c-format -msgid "To create a MD device, you need to have the desired partitions it should consist of marked for use in a RAID. (This is done in partman in the Partition settings menu where you should select Use as: physical volume for RAID .)" +msgid "" +"To create a MD device, you need to have the desired partitions it should " +"consist of marked for use in a RAID. (This is done in partman in the Partition settings menu where you should " +"select Use as: physical volume " +"for RAID .)" msgstr "" #. Tag: para #: using-d-i.xml:1141 #, no-c-format -msgid "Support for MD is a relatively new addition to the installer. You may experience problems for some RAID levels and in combination with some bootloaders if you try to use MD for the root (/) filesystem. For experienced users, it may be possible to work around some of these problems by executing some configuration or installation steps manually from a shell." +msgid "" +"Support for MD is a relatively new addition to the installer. You may " +"experience problems for some RAID levels and in combination with some " +"bootloaders if you try to use MD for the root (/) " +"filesystem. For experienced users, it may be possible to work around some of " +"these problems by executing some configuration or installation steps " +"manually from a shell." msgstr "" #. Tag: para #: using-d-i.xml:1150 #, no-c-format -msgid "Next, you should choose Configure software RAID from the main partman menu. (The menu will only appear after you mark at least one partition for use as physical volume for RAID.) On the first screen of mdcfg simply select Create MD device. You will be presented with a list of supported types of MD devices, from which you should choose one (e.g. RAID1). What follows depends on the type of MD you selected." +msgid "" +"Next, you should choose Configure software RAID " +"from the main partman menu. (The menu will only appear " +"after you mark at least one partition for use as physical " +"volume for RAID.) On the first screen of mdcfg simply select Create MD device. You will " +"be presented with a list of supported types of MD devices, from which you " +"should choose one (e.g. RAID1). What follows depends on the type of MD you " +"selected." msgstr "" #. Tag: para #: using-d-i.xml:1163 #, no-c-format -msgid "RAID0 is simple — you will be issued with the list of available RAID partitions and your only task is to select the partitions which will form the MD." +msgid "" +"RAID0 is simple — you will be issued with the list of available RAID " +"partitions and your only task is to select the partitions which will form " +"the MD." msgstr "" #. Tag: para #: using-d-i.xml:1170 #, no-c-format -msgid "RAID1 is a bit more tricky. First, you will be asked to enter the number of active devices and the number of spare devices which will form the MD. Next, you need to select from the list of available RAID partitions those that will be active and then those that will be spare. The count of selected partitions must be equal to the number provided few seconds ago. Don't worry. If you make a mistake and select different number of partitions, the &d-i; won't let you continue until you correct the issue." +msgid "" +"RAID1 is a bit more tricky. First, you will be asked to enter the number of " +"active devices and the number of spare devices which will form the MD. Next, " +"you need to select from the list of available RAID partitions those that " +"will be active and then those that will be spare. The count of selected " +"partitions must be equal to the number provided few seconds ago. Don't " +"worry. If you make a mistake and select different number of partitions, the " +"&d-i; won't let you continue until you correct the issue." msgstr "" #. Tag: para #: using-d-i.xml:1182 #, no-c-format -msgid "RAID5 has similar setup procedure as RAID1 with the exception that you need to use at least three active partitions." +msgid "" +"RAID5 has similar setup procedure as RAID1 with the exception that you need " +"to use at least three active partitions." msgstr "" #. Tag: para #: using-d-i.xml:1190 #, no-c-format -msgid "It is perfectly possible to have several types of MD at once. For example if you have three 200 GB hard drives dedicated to MD, each containing two 100 GB partitions, you can combine first partitions on all three disk into the RAID0 (fast 300 GB video editing partition) and use the other three partitions (2 active and 1 spare) for RAID1 (quite reliable 100 GB partition for /home)." +msgid "" +"It is perfectly possible to have several types of MD at once. For example if " +"you have three 200 GB hard drives dedicated to MD, each containing two 100 " +"GB partitions, you can combine first partitions on all three disk into the " +"RAID0 (fast 300 GB video editing partition) and use the other three " +"partitions (2 active and 1 spare) for RAID1 (quite reliable 100 GB partition " +"for /home)." msgstr "" #. Tag: para #: using-d-i.xml:1199 #, no-c-format -msgid "After you setup MD devices to your liking, you can Finish mdcfg to return back to the partman to create filesystems on your new MD devices and assign them the usual attributes like mountpoints." +msgid "" +"After you setup MD devices to your liking, you can Finish mdcfg to return back to the " +"partman to create filesystems on your new MD devices and " +"assign them the usual attributes like mountpoints." msgstr "" #. Tag: title @@ -1026,37 +1636,70 @@ msgstr "" #. Tag: para #: using-d-i.xml:1215 #, no-c-format -msgid "If you are working with computers at the level of system administrator or advanced user, you have surely seen the situation where some disk partition (usually the most important one) was short on space, while some other partition was grossly underused and you had to manage this situation with moving stuff around, symlinking, etc." +msgid "" +"If you are working with computers at the level of system administrator or " +"advanced user, you have surely seen the situation where some " +"disk partition (usually the most important one) was short on space, while " +"some other partition was grossly underused and you had to manage this " +"situation with moving stuff around, symlinking, etc." msgstr "" #. Tag: para #: using-d-i.xml:1223 #, no-c-format -msgid "To avoid the described situation you can use Logical Volume Manager (LVM). Simply said, with LVM you can combine your partitions (physical volumes in LVM lingo) to form a virtual disk (so called volume group), which can then be divided into virtual partitions (logical volumes). The point is that logical volumes (and of course underlying volume groups) can span across several physical disks." +msgid "" +"To avoid the described situation you can use Logical Volume Manager (LVM). " +"Simply said, with LVM you can combine your partitions (physical " +"volumes in LVM lingo) to form a virtual disk (so called " +"volume group), which can then be divided into virtual " +"partitions (logical volumes). The point is that " +"logical volumes (and of course underlying volume groups) can span across " +"several physical disks." msgstr "" #. Tag: para #: using-d-i.xml:1233 #, no-c-format -msgid "Now when you realize you need more space for your old 160GB /home partition, you can simply add a new 300GB disk to the computer, join it with your existing volume group and then resize the logical volume which holds your /home filesystem and voila — your users have some room again on their renewed 460GB partition. This example is of course a bit oversimplified. If you haven't read it yet, you should consult the LVM HOWTO." +msgid "" +"Now when you realize you need more space for your old 160GB /home partition, you can simply add a new 300GB disk to the computer, " +"join it with your existing volume group and then resize the logical volume " +"which holds your /home filesystem and voila — " +"your users have some room again on their renewed 460GB partition. This " +"example is of course a bit oversimplified. If you haven't read it yet, you " +"should consult the LVM HOWTO." msgstr "" #. Tag: para #: using-d-i.xml:1244 #, no-c-format -msgid "LVM setup in &d-i; is quite simple and completely supported inside partman. First, you have to mark the partition(s) to be used as physical volumes for LVM. This is done in the Partition settings menu where you should select Use as: physical volume for LVM ." +msgid "" +"LVM setup in &d-i; is quite simple and completely supported inside " +"partman. First, you have to mark the partition(s) to be " +"used as physical volumes for LVM. This is done in the Partition " +"settings menu where you should select Use as:" +" physical volume for LVM ." msgstr "" #. Tag: para #: using-d-i.xml:1253 #, no-c-format -msgid "When you return to the main partman screen, you will see a new option Configure the Logical Volume Manager. When you select that, you will first be asked to confirm pending changes to the partition table (if any) and after that the LVM configuration menu will be shown. Above the menu a summary of the LVM configuration is shown. The menu itself is context sensitive and only shows valid actions. The possible actions are:" +msgid "" +"When you return to the main partman screen, you will see " +"a new option Configure the Logical Volume Manager. When you select that, you will first be asked to confirm " +"pending changes to the partition table (if any) and after that the LVM " +"configuration menu will be shown. Above the menu a summary of the LVM " +"configuration is shown. The menu itself is context sensitive and only shows " +"valid actions. The possible actions are:" msgstr "" #. Tag: para #: using-d-i.xml:1264 #, no-c-format -msgid "Display configuration details: shows LVM device structure, names and sizes of logical volumes and more" +msgid "" +"Display configuration details: shows LVM device " +"structure, names and sizes of logical volumes and more" msgstr "" #. Tag: guimenuitem @@ -1098,25 +1741,36 @@ msgstr "" #. Tag: para #: using-d-i.xml:1286 #, no-c-format -msgid "Finish: return to the main partman screen" +msgid "" +"Finish: return to the main partman screen" msgstr "" #. Tag: para #: using-d-i.xml:1292 #, no-c-format -msgid "Use the options in that menu to first create a volume group and then create your logical volumes inside it." +msgid "" +"Use the options in that menu to first create a volume group and then create " +"your logical volumes inside it." msgstr "" #. Tag: para #: using-d-i.xml:1298 #, no-c-format -msgid "You can also use this menu to delete an existing LVM configuration from your hard disk before choosing Guided partitioning using LVM. Guided partitioning using LVM is not possible if there already are volume groups defined, but by removing them you can get a clean start." +msgid "" +"You can also use this menu to delete an existing LVM configuration from your " +"hard disk before choosing Guided partitioning using LVM. " +"Guided partitioning using LVM is not possible if there already are volume " +"groups defined, but by removing them you can get a clean start." msgstr "" #. Tag: para #: using-d-i.xml:1306 #, no-c-format -msgid "After you return to the main partman screen, any created logical volumes will be displayed in the same way as ordinary partitions (and you should treat them as such)." +msgid "" +"After you return to the main partman screen, any created " +"logical volumes will be displayed in the same way as ordinary partitions " +"(and you should treat them as such)." msgstr "" #. Tag: title @@ -1128,37 +1782,76 @@ msgstr "" #. Tag: para #: using-d-i.xml:1321 #, no-c-format -msgid "&d-i; allows you to set up encrypted partitions. Every file you write to such a partition is immediately saved to the device in encrypted form. Access to the encrypted data is granted only after entering the passphrase used when the encrypted partition was originally created. This feature is useful to protect sensitive data in case your laptop or hard drive gets stolen. The thief might get physical access to the hard drive, but without knowing the right passphrase, the data on the hard drive will look like random characters." +msgid "" +"&d-i; allows you to set up encrypted partitions. Every file you write to " +"such a partition is immediately saved to the device in encrypted form. " +"Access to the encrypted data is granted only after entering the " +"passphrase used when the encrypted partition was " +"originally created. This feature is useful to protect sensitive data in case " +"your laptop or hard drive gets stolen. The thief might get physical access " +"to the hard drive, but without knowing the right passphrase, the data on the " +"hard drive will look like random characters." msgstr "" #. Tag: para #: using-d-i.xml:1333 #, no-c-format -msgid "The two most important partitions to encrypt are: the home partition, where your private data resides, and the swap partition, where sensitive data might be stored temporarily during operation. Of course, nothing prevents you from encrypting any other partitions that might be of interest. For example /var where database servers, mail servers or print servers store their data, or /tmp which is used by various programs to store potentially interesting temporary files. Some people may even want to encrypt their whole system. The only exception is the /boot partition which must remain unencrypted, because currently there is no way to load the kernel from an encrypted partition." +msgid "" +"The two most important partitions to encrypt are: the home partition, where " +"your private data resides, and the swap partition, where sensitive data " +"might be stored temporarily during operation. Of course, nothing prevents " +"you from encrypting any other partitions that might be of interest. For " +"example /var where database servers, mail servers or " +"print servers store their data, or /tmp which is used " +"by various programs to store potentially interesting temporary files. Some " +"people may even want to encrypt their whole system. The only exception is " +"the /boot partition which must remain unencrypted, " +"because currently there is no way to load the kernel from an encrypted " +"partition." msgstr "" #. Tag: para #: using-d-i.xml:1348 #, no-c-format -msgid "Please note that the performance of encrypted partitions will be less than that of unencrypted ones because the data needs to be decrypted or encrypted for every read or write. The performance impact depends on your CPU speed, chosen cipher and a key length." +msgid "" +"Please note that the performance of encrypted partitions will be less than " +"that of unencrypted ones because the data needs to be decrypted or encrypted " +"for every read or write. The performance impact depends on your CPU speed, " +"chosen cipher and a key length." msgstr "" #. Tag: para #: using-d-i.xml:1355 #, no-c-format -msgid "To use encryption, you have to create a new partition by selecting some free space in the main partitioning menu. Another option is to choose an existing partition (e.g. a regular partition, an LVM logical volume or a RAID volume). In the Partition setting menu, you need to select physical volume for encryption at the Use as: option. The menu will then change to include several cryptographic options for the partition." +msgid "" +"To use encryption, you have to create a new partition by selecting some free " +"space in the main partitioning menu. Another option is to choose an existing " +"partition (e.g. a regular partition, an LVM logical volume or a RAID " +"volume). In the Partition setting menu, you need to " +"select physical volume for encryption at the " +" Use as: option. The menu will " +"then change to include several cryptographic options for the partition." msgstr "" #. Tag: para #: using-d-i.xml:1366 #, no-c-format -msgid "&d-i; supports several encryption methods. The default method is dm-crypt (included in newer Linux kernels, able to host LVM physical volumes), the other is loop-AES (older, maintained separately from the Linux kernel tree). Unless you have compelling reasons to do otherwise, it is recommended to use the default." +msgid "" +"&d-i; supports several encryption methods. The default method is " +"dm-crypt (included in newer Linux kernels, able to " +"host LVM physical volumes), the other is loop-AES " +"(older, maintained separately from the Linux kernel tree). Unless you have " +"compelling reasons to do otherwise, it is recommended to use the default." msgstr "" #. Tag: para #: using-d-i.xml:1378 #, no-c-format -msgid "First, let's have a look at the options available when you select Device-mapper (dm-crypt) as the encryption method. As always: when in doubt, use the defaults, because they have been carefully chosen with security in mind." +msgid "" +"First, let's have a look at the options available when you select " +"Device-mapper (dm-crypt) as the encryption method. As " +"always: when in doubt, use the defaults, because they have been carefully " +"chosen with security in mind." msgstr "" #. Tag: term @@ -1170,7 +1863,17 @@ msgstr "" #. Tag: para #: using-d-i.xml:1390 #, no-c-format -msgid "This option lets you select the encryption algorithm (cipher) which will be used to encrypt the data on the partition. &d-i; currently supports the following block ciphers: aes, blowfish, serpent, and twofish. It is beyond the scope of this document to discuss the qualities of these different algorithms, however, it might help your decision to know that in 2000, AES was chosen by the American National Institute of Standards and Technology as the standard encryption algorithm for protecting sensitive information in the 21st century." +msgid "" +"This option lets you select the encryption algorithm (cipher) which will be used to encrypt the data on the partition. &d-i; " +"currently supports the following block ciphers: aes, " +"blowfish, serpent, and " +"twofish. It is beyond the scope of this document to " +"discuss the qualities of these different algorithms, however, it might help " +"your decision to know that in 2000, AES was chosen by " +"the American National Institute of Standards and Technology as the standard " +"encryption algorithm for protecting sensitive information in the 21st " +"century." msgstr "" #. Tag: term @@ -1182,7 +1885,11 @@ msgstr "" #. Tag: para #: using-d-i.xml:1410 #, no-c-format -msgid "Here you can specify the length of the encryption key. With a larger key size, the strength of the encryption is generally improved. On the other hand, increasing the length of the key usually has a negative impact on performance. Available key sizes vary depending on the cipher." +msgid "" +"Here you can specify the length of the encryption key. With a larger key " +"size, the strength of the encryption is generally improved. On the other " +"hand, increasing the length of the key usually has a negative impact on " +"performance. Available key sizes vary depending on the cipher." msgstr "" #. Tag: term @@ -1194,13 +1901,23 @@ msgstr "" #. Tag: para #: using-d-i.xml:1424 #, no-c-format -msgid "The Initialization Vector or IV algorithm is used in cryptography to ensure that applying the cipher on the same clear text data with the same key always produces a unique cipher text. The idea is to prevent the attacker from deducing information from repeated patterns in the encrypted data." +msgid "" +"The Initialization Vector or IV algorithm is used in cryptography to ensure that applying the " +"cipher on the same clear text data with the same key " +"always produces a unique cipher text. The idea is to " +"prevent the attacker from deducing information from repeated patterns in the " +"encrypted data." msgstr "" #. Tag: para #: using-d-i.xml:1434 #, no-c-format -msgid "From the provided alternatives, the default cbc-essiv:sha256 is currently the least vulnerable to known attacks. Use the other alternatives only when you need to ensure compatibility with some previously installed system that is not able to use newer algorithms." +msgid "" +"From the provided alternatives, the default cbc-essiv:sha256 is currently the least vulnerable to known attacks. Use the other " +"alternatives only when you need to ensure compatibility with some previously " +"installed system that is not able to use newer algorithms." msgstr "" #. Tag: term @@ -1224,7 +1941,11 @@ msgstr "" #. Tag: para #: using-d-i.xml:1455 #, no-c-format -msgid "The encryption key will be computed Using a passphrase as the key currently means that the partition will be set up using LUKS. on the basis of a passphrase which you will be able to enter later in the process." +msgid "" +"The encryption key will be computed Using a passphrase as " +"the key currently means that the partition will be set up using LUKS. on the basis of a passphrase " +"which you will be able to enter later in the process." msgstr "" #. Tag: term @@ -1236,13 +1957,26 @@ msgstr "" #. Tag: para #: using-d-i.xml:1471 #, no-c-format -msgid "A new encryption key will be generated from random data each time you try to bring up the encrypted partition. In other words: on every shutdown the content of the partition will be lost as the key is deleted from memory. (Of course, you could try to guess the key with a brute force attack, but unless there is an unknown weakness in the cipher algorithm, it is not achievable in our lifetime.)" +msgid "" +"A new encryption key will be generated from random data each time you try to " +"bring up the encrypted partition. In other words: on every shutdown the " +"content of the partition will be lost as the key is deleted from memory. (Of " +"course, you could try to guess the key with a brute force attack, but unless " +"there is an unknown weakness in the cipher algorithm, it is not achievable " +"in our lifetime.)" msgstr "" #. Tag: para #: using-d-i.xml:1480 #, no-c-format -msgid "Random keys are useful for swap partitions because you do not need to bother yourself with remembering the passphrase or wiping sensitive information from the swap partition before shutting down your computer. However, it also means that you will not be able to use the suspend-to-disk functionality offered by newer Linux kernels as it will be impossible (during a subsequent boot) to recover the suspended data written to the swap partition." +msgid "" +"Random keys are useful for swap partitions because you do not need to bother " +"yourself with remembering the passphrase or wiping sensitive information " +"from the swap partition before shutting down your computer. However, it also " +"means that you will not be able to use the " +"suspend-to-disk functionality offered by newer Linux kernels " +"as it will be impossible (during a subsequent boot) to recover the suspended " +"data written to the swap partition." msgstr "" #. Tag: term @@ -1254,13 +1988,24 @@ msgstr "" #. Tag: para #: using-d-i.xml:1501 #, no-c-format -msgid "Determines whether the content of this partition should be overwritten with random data before setting up the encryption. This is recommended because it might otherwise be possible for an attacker to discern which parts of the partition are in use and which are not. In addition, this will make it harder to recover any leftover data from previous installations It is believed that the guys from three-letter agencies can restore the data even after several rewrites of the magnetooptical media, though. ." +msgid "" +"Determines whether the content of this partition should be overwritten with " +"random data before setting up the encryption. This is recommended because it " +"might otherwise be possible for an attacker to discern which parts of the " +"partition are in use and which are not. In addition, this will make it " +"harder to recover any leftover data from previous " +"installations It is believed that the guys from three-letter " +"agencies can restore the data even after several rewrites of the " +"magnetooptical media, though. ." msgstr "" #. Tag: para #: using-d-i.xml:1521 #, no-c-format -msgid "If you select Encryption method: Loopback (loop-AES) , the menu changes to provide the following options:" +msgid "" +"If you select Encryption method: " +"Loopback (loop-AES) , the menu " +"changes to provide the following options:" msgstr "" #. Tag: term @@ -1272,7 +2017,10 @@ msgstr "" #. Tag: para #: using-d-i.xml:1532 #, no-c-format -msgid "For loop-AES, unlike dm-crypt, the options for cipher and key size are combined, so you can select both at the same time. Please see the above sections on ciphers and key sizes for further information." +msgid "" +"For loop-AES, unlike dm-crypt, the options for cipher and key size are " +"combined, so you can select both at the same time. Please see the above " +"sections on ciphers and key sizes for further information." msgstr "" #. Tag: term @@ -1296,7 +2044,11 @@ msgstr "" #. Tag: para #: using-d-i.xml:1551 #, no-c-format -msgid "The encryption key will be generated from random data during the installation. Moreover this key will be encrypted with GnuPG, so to use it, you will need to enter the proper passphrase (you will be asked to provide one later in the process)." +msgid "" +"The encryption key will be generated from random data during the " +"installation. Moreover this key will be encrypted with GnuPG, so to use it, you will need to enter the proper passphrase " +"(you will be asked to provide one later in the process)." msgstr "" #. Tag: para @@ -1314,56 +2066,104 @@ msgstr "" #. Tag: para #: using-d-i.xml:1587 #, no-c-format -msgid "Please note that the graphical version of the installer still has some limitations when compared to the textual one. For cryptography it means you can set up only volumes using passphrases as the encryption keys." +msgid "" +"Please note that the graphical version of the installer " +"still has some limitations when compared to the textual one. For " +"cryptography it means you can set up only volumes using " +"passphrases as the encryption keys." msgstr "" #. Tag: para #: using-d-i.xml:1594 #, no-c-format -msgid "After you have selected the desired parameters for your encrypted partitions, return back to the main partitioning menu. There should now be a new menu item called Configure encrypted volumes. After you select it, you will be asked to confirm the deletion of data on partitions marked to be erased and possibly other actions such as writing a new partition table. For large partitions this might take some time." +msgid "" +"After you have selected the desired parameters for your encrypted " +"partitions, return back to the main partitioning menu. There should now be a " +"new menu item called Configure encrypted volumes. After " +"you select it, you will be asked to confirm the deletion of data on " +"partitions marked to be erased and possibly other actions such as writing a " +"new partition table. For large partitions this might take some time." msgstr "" #. Tag: para #: using-d-i.xml:1605 #, no-c-format -msgid "Next you will be asked to enter a passphrase for partitions configured to use one. Good passphrases should be longer than 8 characters, should be a mixture of letters, numbers and other characters and should not contain common dictionary words or information easily associable with you (such as birthdates, hobbies, pet names, names of family members or relatives, etc.)." +msgid "" +"Next you will be asked to enter a passphrase for partitions configured to " +"use one. Good passphrases should be longer than 8 characters, should be a " +"mixture of letters, numbers and other characters and should not contain " +"common dictionary words or information easily associable with you (such as " +"birthdates, hobbies, pet names, names of family members or relatives, etc.)." msgstr "" #. Tag: para #: using-d-i.xml:1614 #, no-c-format -msgid "Before you input any passphrases, you should have made sure that your keyboard is configured correctly and generates the expected characters. If you are unsure, you can switch to the second virtual console and type some text at the prompt. This ensures that you won't be surprised later, e.g. by trying to input a passphrase using a qwerty keyboard layout when you used an azerty layout during the installation. This situation can have several causes. Maybe you switched to another keyboard layout during the installation, or the selected keyboard layout might not have been set up yet when entering the passphrase for the root file system." +msgid "" +"Before you input any passphrases, you should have made sure that your " +"keyboard is configured correctly and generates the expected characters. If " +"you are unsure, you can switch to the second virtual console and type some " +"text at the prompt. This ensures that you won't be surprised later, e.g. by " +"trying to input a passphrase using a qwerty keyboard layout when you used an " +"azerty layout during the installation. This situation can have several " +"causes. Maybe you switched to another keyboard layout during the " +"installation, or the selected keyboard layout might not have been set up yet " +"when entering the passphrase for the root file system." msgstr "" #. Tag: para #: using-d-i.xml:1627 #, no-c-format -msgid "If you selected to use methods other than a passphrase to create encryption keys, they will be generated now. Because the kernel may not have gathered a sufficient amount of entropy at this early stage of the installation, the process may take a long time. You can help speed up the process by generating entropy: e.g. by pressing random keys, or by switching to the shell on the second virtual console and generating some network and disk traffic (downloading some files, feeding big files into /dev/null, etc.). This will be repeated for each partition to be encrypted." +msgid "" +"If you selected to use methods other than a passphrase to create encryption " +"keys, they will be generated now. Because the kernel may not have gathered a " +"sufficient amount of entropy at this early stage of the installation, the " +"process may take a long time. You can help speed up the process by " +"generating entropy: e.g. by pressing random keys, or by switching to the " +"shell on the second virtual console and generating some network and disk " +"traffic (downloading some files, feeding big files into /dev/null, etc.). This will be repeated for each partition to be encrypted." msgstr "" #. Tag: para #: using-d-i.xml:1643 #, no-c-format msgid "" -"After returning to the main partitioning menu, you will see all encrypted volumes as additional partitions which can be configured in the same way as ordinary partitions. The following example shows two different volumes. The first one is encrypted via dm-crypt, the second one via loop-AES. \n" -"Encrypted volume (crypt0) - 115.1 GB Linux device-mapper\n" +"After returning to the main partitioning menu, you will see all encrypted " +"volumes as additional partitions which can be configured in the same way as " +"ordinary partitions. The following example shows two different volumes. The " +"first one is encrypted via dm-crypt, the second one via loop-AES. " +"\n" +"Encrypted volume (crypt0) - 115.1 GB Linux device-" +"mapper\n" " #1 115.1 GB F ext3\n" "\n" "Loopback (loop0) - 515.2 MB AES256 keyfile\n" " #1 515.2 MB F ext3\n" -" Now is the time to assign mount points to the volumes and optionally change the file system types if the defaults do not suit you." +" Now is the time to assign mount points to the " +"volumes and optionally change the file system types if the defaults do not " +"suit you." msgstr "" #. Tag: para #: using-d-i.xml:1656 #, no-c-format -msgid "One thing to note here are the identifiers in parentheses (crypt0 and loop0 in this case) and the mount points you assigned to each encrypted volume. You will need this information later when booting the new system. The differences between ordinary boot process and boot process with encryption involved will be covered later in ." +msgid "" +"One thing to note here are the identifiers in parentheses " +"(crypt0 and loop0 in " +"this case) and the mount points you assigned to each encrypted volume. You " +"will need this information later when booting the new system. The " +"differences between ordinary boot process and boot process with encryption " +"involved will be covered later in ." msgstr "" #. Tag: para #: using-d-i.xml:1666 #, no-c-format -msgid "Once you are satisfied with the partitioning scheme, continue with the installation." +msgid "" +"Once you are satisfied with the partitioning scheme, continue with the " +"installation." msgstr "" #. Tag: title @@ -1375,7 +2175,9 @@ msgstr "" #. Tag: para #: using-d-i.xml:1678 #, no-c-format -msgid "After partitioning the installer asks a few more questions that will be used to set up the system it is about to install." +msgid "" +"After partitioning the installer asks a few more questions that will be used " +"to set up the system it is about to install." msgstr "" #. Tag: title @@ -1387,7 +2189,11 @@ msgstr "" #. Tag: para #: using-d-i.xml:1692 #, no-c-format -msgid "Depending on the location selected at the beginning of the installation process, you might be shown a list of timezones relevant for that location. If your location has only one time zone, you will not be asked anything and the system will assume that time zone." +msgid "" +"Depending on the location selected at the beginning of the installation " +"process, you might be shown a list of timezones relevant for that location. " +"If your location has only one time zone, you will not be asked anything and " +"the system will assume that time zone." msgstr "" #. Tag: title @@ -1399,19 +2205,33 @@ msgstr "" #. Tag: para #: using-d-i.xml:1710 #, no-c-format -msgid "The installer might ask you if the computer's clock is set to UTC. Normally this question is avoided if possible and the installer tries to work out whether the clock is set to UTC based on things like what other operating systems are installed." +msgid "" +"The installer might ask you if the computer's clock is set to UTC. Normally " +"this question is avoided if possible and the installer tries to work out " +"whether the clock is set to UTC based on things like what other operating " +"systems are installed." msgstr "" #. Tag: para #: using-d-i.xml:1717 #, no-c-format -msgid "In expert mode you will always be able to choose whether or not the clock is set to UTC. Macintosh hardware clocks are normally set to local time. If you want to dual-boot, select local time instead of GMT. Systems that (also) run Dos or Windows are normally set to local time. If you want to dual-boot, select local time instead of GMT." +msgid "" +"In expert mode you will always be able to choose whether or not the clock is " +"set to UTC. Macintosh hardware clocks are " +"normally set to local time. If you want to dual-boot, select local time " +"instead of GMT. Systems that (also) run Dos or " +"Windows are normally set to local time. If you want to dual-boot, select " +"local time instead of GMT." msgstr "" #. Tag: para #: using-d-i.xml:1728 #, no-c-format -msgid "Note that the installer does not currently allow you to actually set the time in the computer's clock. You can set the clock to the current time after you have installed, if it is incorrect or if it was previously not set to UTC." +msgid "" +"Note that the installer does not currently allow you to actually set the " +"time in the computer's clock. You can set the clock to the current time " +"after you have installed, if it is incorrect or if it was previously not set " +"to UTC." msgstr "" #. Tag: title @@ -1429,19 +2249,31 @@ msgstr "" #. Tag: para #: using-d-i.xml:1749 #, no-c-format -msgid "The root account is also called the super-user; it is a login that bypasses all security protection on your system. The root account should only be used to perform system administration, and only used for as short a time as possible." +msgid "" +"The root account is also called the super-" +"user; it is a login that bypasses all security protection on your " +"system. The root account should only be used to perform system " +"administration, and only used for as short a time as possible." msgstr "" #. Tag: para #: using-d-i.xml:1757 #, no-c-format -msgid "Any password you create should contain at least 6 characters, and should contain both upper- and lower-case characters, as well as punctuation characters. Take extra care when setting your root password, since it is such a powerful account. Avoid dictionary words or use of any personal information which could be guessed." +msgid "" +"Any password you create should contain at least 6 characters, and should " +"contain both upper- and lower-case characters, as well as punctuation " +"characters. Take extra care when setting your root password, since it is " +"such a powerful account. Avoid dictionary words or use of any personal " +"information which could be guessed." msgstr "" #. Tag: para #: using-d-i.xml:1765 #, no-c-format -msgid "If anyone ever tells you they need your root password, be extremely wary. You should normally never give your root password out, unless you are administering a machine with more than one system administrator." +msgid "" +"If anyone ever tells you they need your root password, be extremely wary. " +"You should normally never give your root password out, unless you are " +"administering a machine with more than one system administrator." msgstr "" #. Tag: title @@ -1453,25 +2285,42 @@ msgstr "" #. Tag: para #: using-d-i.xml:1777 #, no-c-format -msgid "The system will ask you whether you wish to create an ordinary user account at this point. This account should be your main personal log-in. You should not use the root account for daily use or as your personal login." +msgid "" +"The system will ask you whether you wish to create an ordinary user account " +"at this point. This account should be your main personal log-in. You should " +"not use the root account for daily use or as your " +"personal login." msgstr "" #. Tag: para #: using-d-i.xml:1784 #, no-c-format -msgid "Why not? Well, one reason to avoid using root's privileges is that it is very easy to do irreparable damage as root. Another reason is that you might be tricked into running a Trojan-horse program — that is a program that takes advantage of your super-user powers to compromise the security of your system behind your back. Any good book on Unix system administration will cover this topic in more detail — consider reading one if it is new to you." +msgid "" +"Why not? Well, one reason to avoid using root's privileges is that it is " +"very easy to do irreparable damage as root. Another reason is that you might " +"be tricked into running a Trojan-horse program — " +"that is a program that takes advantage of your super-user powers to " +"compromise the security of your system behind your back. Any good book on " +"Unix system administration will cover this topic in more detail — " +"consider reading one if it is new to you." msgstr "" #. Tag: para #: using-d-i.xml:1794 #, no-c-format -msgid "You will first be prompted for the user's full name. Then you'll be asked for a name for the user account; generally your first name or something similar will suffice and indeed will be the default. Finally, you will be prompted for a password for this account." +msgid "" +"You will first be prompted for the user's full name. Then you'll be asked " +"for a name for the user account; generally your first name or something " +"similar will suffice and indeed will be the default. Finally, you will be " +"prompted for a password for this account." msgstr "" #. Tag: para #: using-d-i.xml:1801 #, no-c-format -msgid "If at any point after installation you would like to create another account, use the adduser command." +msgid "" +"If at any point after installation you would like to create another account, " +"use the adduser command." msgstr "" #. Tag: title @@ -1483,7 +2332,11 @@ msgstr "" #. Tag: para #: using-d-i.xml:1814 #, no-c-format -msgid "Although this stage is the least problematic, it consumes a significant fraction of the install because it downloads, verifies and unpacks the whole base system. If you have a slow computer or network connection, this could take some time." +msgid "" +"Although this stage is the least problematic, it consumes a significant " +"fraction of the install because it downloads, verifies and unpacks the whole " +"base system. If you have a slow computer or network connection, this could " +"take some time." msgstr "" #. Tag: title @@ -1495,19 +2348,31 @@ msgstr "" #. Tag: para #: using-d-i.xml:1830 #, no-c-format -msgid "During the Base installation, package unpacking and setup messages are redirected to tty4. You can access this terminal by pressing Left AltF4; get back to the main installer process with Left AltF1." +msgid "" +"During the Base installation, package unpacking and setup messages are " +"redirected to tty4. You can access this terminal by " +"pressing Left AltF4; " +"get back to the main installer process with Left AltF1." msgstr "" #. Tag: para #: using-d-i.xml:1840 #, no-c-format -msgid "The unpack/setup messages generated by the base installation are saved in /var/log/syslog when the installation is performed over a serial console." +msgid "" +"The unpack/setup messages generated by the base installation are saved in " +"/var/log/syslog when the installation is performed over " +"a serial console." msgstr "" #. Tag: para #: using-d-i.xml:1846 #, no-c-format -msgid "As part of the installation, a Linux kernel will be installed. At the default priority, the installer will choose one for you that best matches your hardware. In lower priority modes, you will be able to choose from a list of available kernels." +msgid "" +"As part of the installation, a Linux kernel will be installed. At the " +"default priority, the installer will choose one for you that best matches " +"your hardware. In lower priority modes, you will be able to choose from a " +"list of available kernels." msgstr "" #. Tag: title @@ -1519,7 +2384,12 @@ msgstr "" #. Tag: para #: using-d-i.xml:1860 #, no-c-format -msgid "After the base system is installed, you have a usable but limited system. Most users will want to add additional software to the system to tune it to their needs, and the installer lets you do so. This step can take even longer than installing the base system if you have a slow computer or network." +msgid "" +"After the base system is installed, you have a usable but limited system. " +"Most users will want to add additional software to the system to tune it to " +"their needs, and the installer lets you do so. This step can take even " +"longer than installing the base system if you have a slow computer or " +"network." msgstr "" #. Tag: title @@ -1531,13 +2401,33 @@ msgstr "" #. Tag: para #: using-d-i.xml:1876 #, no-c-format -msgid "The main means that people use to install packages on their system is via a program called apt-get, from the apt package. Note that the actual program that installs packages is called dpkg. However, this program is more of a low-level tool. apt-get is a higher-level tool as it will invoke dpkg as appropriate and also because it knows to install other packages which are required for the package you're trying to install, as well as how to retrieve the package from your CD, the network, or wherever. Other front-ends for package management, like aptitude and synaptic are also in use and depend on apt-get. These front-ends are recommended for new users, since they integrate some additional features (package searching and status checks) in a nice user interface." +msgid "" +"The main means that people use to install packages on their system is via a " +"program called apt-get, from the apt package. Note that the actual program that " +"installs packages is called dpkg. However, this program " +"is more of a low-level tool. apt-get is a higher-level " +"tool as it will invoke dpkg as appropriate and also " +"because it knows to install other packages which are required for the " +"package you're trying to install, as well as how to retrieve the package " +"from your CD, the network, or wherever. Other front-ends " +"for package management, like aptitude and " +"synaptic are also in use and depend on apt-get. These front-ends are recommended for new users, since they " +"integrate some additional features (package searching and status checks) in " +"a nice user interface." msgstr "" #. Tag: para #: using-d-i.xml:1900 #, no-c-format -msgid "apt must be configured so that it knows where to retrieve packages from. The installer largely takes care of this automatically based on what it knows about your installation medium. The results of this configuration are written to the file /etc/apt/sources.list, and you can examine and edit it to your liking after the install is complete." +msgid "" +"apt must be configured so that it knows where to retrieve " +"packages from. The installer largely takes care of this automatically based " +"on what it knows about your installation medium. The results of this " +"configuration are written to the file /etc/apt/sources.list, and you can examine and edit it to your liking after the install " +"is complete." msgstr "" #. Tag: title @@ -1549,37 +2439,69 @@ msgstr "" #. Tag: para #: using-d-i.xml:1918 #, no-c-format -msgid "During the installation process, you are given the opportunity to select additional software to install. Rather than picking individual software packages from the &num-of-distrib-pkgs; available packages, this stage of the installation process focuses on selecting and installing predefined collections of software to quickly set up your computer to perform various tasks." +msgid "" +"During the installation process, you are given the opportunity to select " +"additional software to install. Rather than picking individual software " +"packages from the &num-of-distrib-pkgs; available packages, this stage of " +"the installation process focuses on selecting and installing predefined " +"collections of software to quickly set up your computer to perform various " +"tasks." msgstr "" #. Tag: para #: using-d-i.xml:1927 #, no-c-format -msgid "So, you have the ability to choose tasks first, and then add on more individual packages later. These tasks loosely represent a number of different jobs or things you want to do with your computer, such as Desktop environment, Web server, or Print server You should know that to present this list, the installer is merely invoking the tasksel program. It can be run at any time after installation to install (or remove) more packages, or you can use a more fine-grained tool such as aptitude. If you are looking for a specific single package, after installation is complete, simply run aptitude install package, where package is the name of the package you are looking for. . lists the space requirements for the available tasks." +msgid "" +"So, you have the ability to choose tasks first, and " +"then add on more individual packages later. These tasks loosely represent a " +"number of different jobs or things you want to do with your computer, such " +"as Desktop environment, Web server, or " +"Print server You should know that to present " +"this list, the installer is merely invoking the tasksel " +"program. It can be run at any time after installation to install (or remove) " +"more packages, or you can use a more fine-grained tool such as " +"aptitude. If you are looking for a specific single " +"package, after installation is complete, simply run aptitude " +"install package, where " +"package is the name of the package you are " +"looking for. . " +"lists the space requirements for the available tasks." msgstr "" #. Tag: para #: using-d-i.xml:1952 #, no-c-format -msgid "Once you've selected your tasks, select Ok. At this point, aptitude will install the packages you've selected." +msgid "" +"Once you've selected your tasks, select Ok. At this " +"point, aptitude will install the packages you've selected." msgstr "" #. Tag: para #: using-d-i.xml:1959 #, no-c-format -msgid "In the standard user interface of the installer, you can use the space bar to toggle selection of a task." +msgid "" +"In the standard user interface of the installer, you can use the space bar " +"to toggle selection of a task." msgstr "" #. Tag: para #: using-d-i.xml:1966 #, no-c-format -msgid "Note that some tasks may be pre-selected based on the characteristics of the computer you are installing. If you disagree with these selections you can un-select the tasks. You can even opt to install no tasks at all at this point." +msgid "" +"Note that some tasks may be pre-selected based on the characteristics of the " +"computer you are installing. If you disagree with these selections you can " +"un-select the tasks. You can even opt to install no tasks at all at this " +"point." msgstr "" #. Tag: para #: using-d-i.xml:1974 #, no-c-format -msgid "Each package you selected with tasksel is downloaded, unpacked and then installed in turn by the apt-get and dpkg programs. If a particular program needs more information from the user, it will prompt you during this process." +msgid "" +"Each package you selected with tasksel is downloaded, " +"unpacked and then installed in turn by the apt-get and " +"dpkg programs. If a particular program needs more " +"information from the user, it will prompt you during this process." msgstr "" #. Tag: title @@ -1591,19 +2513,30 @@ msgstr "" #. Tag: para #: using-d-i.xml:1985 #, no-c-format -msgid "Today, email is a very important part of many people's life, so it's no surprise Debian lets you configure your mail system right as a part of the installation process. The standard mail transport agent in Debian is exim4, which is relatively small, flexible, and easy to learn." +msgid "" +"Today, email is a very important part of many people's life, so it's no " +"surprise Debian lets you configure your mail system right as a part of the " +"installation process. The standard mail transport agent in Debian is " +"exim4, which is relatively small, flexible, and easy to " +"learn." msgstr "" #. Tag: para #: using-d-i.xml:1993 #, no-c-format -msgid "You may ask if this is needed even if your computer is not connected to any network. The short answer is: Yes. The longer explanation: Some system utilities (like cron, quota, aide, …) may send you important notices via email." +msgid "" +"You may ask if this is needed even if your computer is not connected to any " +"network. The short answer is: Yes. The longer explanation: Some system " +"utilities (like cron, quota, " +"aide, …) may send you important notices via email." msgstr "" #. Tag: para #: using-d-i.xml:2001 #, no-c-format -msgid "So on the first screen you will be presented with several common mail scenarios. Choose the one that most closely resembles your needs:" +msgid "" +"So on the first screen you will be presented with several common mail " +"scenarios. Choose the one that most closely resembles your needs:" msgstr "" #. Tag: term @@ -1615,7 +2548,11 @@ msgstr "" #. Tag: para #: using-d-i.xml:2011 #, no-c-format -msgid "Your system is connected to a network and your mail is sent and received directly using SMTP. On the following screens you will be asked a few basic questions, like your machine's mail name, or a list of domains for which you accept or relay mail." +msgid "" +"Your system is connected to a network and your mail is sent and received " +"directly using SMTP. On the following screens you will be asked a few basic " +"questions, like your machine's mail name, or a list of domains for which you " +"accept or relay mail." msgstr "" #. Tag: term @@ -1627,7 +2564,13 @@ msgstr "" #. Tag: para #: using-d-i.xml:2023 #, no-c-format -msgid "In this scenario is your outgoing mail forwarded to another machine, called a smarthost, which does the actual job for you. Smarthost also usually stores incoming mail addressed to your computer, so you don't need to be permanently online. That also means you have to download your mail from the smarthost via programs like fetchmail. This option is suitable for dial-up users." +msgid "" +"In this scenario is your outgoing mail forwarded to another machine, called " +"a smarthost, which does the actual job for you. Smarthost " +"also usually stores incoming mail addressed to your computer, so you don't " +"need to be permanently online. That also means you have to download your " +"mail from the smarthost via programs like fetchmail. This option is suitable " +"for dial-up users." msgstr "" #. Tag: term @@ -1639,7 +2582,13 @@ msgstr "" #. Tag: para #: using-d-i.xml:2037 #, no-c-format -msgid "Your system is not on a network and mail is sent or received only between local users. Even if you don't plan to send any messages, this option is highly recommended, because some system utilities may send you various alerts from time to time (e.g. beloved Disk quota exceeded). This option is also convenient for new users, because it doesn't ask any further questions." +msgid "" +"Your system is not on a network and mail is sent or received only between " +"local users. Even if you don't plan to send any messages, this option is " +"highly recommended, because some system utilities may send you various " +"alerts from time to time (e.g. beloved Disk quota exceeded). " +"This option is also convenient for new users, because it doesn't ask any " +"further questions." msgstr "" #. Tag: term @@ -1651,13 +2600,22 @@ msgstr "" #. Tag: para #: using-d-i.xml:2051 #, no-c-format -msgid "Choose this if you are absolutely convinced you know what you are doing. This will leave you with an unconfigured mail system — until you configure it, you won't be able to send or receive any mail and you may miss some important messages from your system utilities." +msgid "" +"Choose this if you are absolutely convinced you know what you are doing. " +"This will leave you with an unconfigured mail system — until you " +"configure it, you won't be able to send or receive any mail and you may miss " +"some important messages from your system utilities." msgstr "" #. Tag: para #: using-d-i.xml:2062 #, no-c-format -msgid "If none of these scenarios suits your needs, or if you need a finer setup, you will need to edit configuration files under the /etc/exim4 directory after the installation is complete. More information about exim4 may be found under /usr/share/doc/exim4." +msgid "" +"If none of these scenarios suits your needs, or if you need a finer setup, " +"you will need to edit configuration files under the /etc/exim4 directory after the installation is complete. More information " +"about exim4 may be found under /usr/share/doc/" +"exim4." msgstr "" #. Tag: title @@ -1669,13 +2627,22 @@ msgstr "" #. Tag: para #: using-d-i.xml:2079 #, no-c-format -msgid "If you are installing a diskless workstation, obviously, booting off the local disk isn't a meaningful option, and this step will be skipped. You may wish to set the OpenBoot to boot from the network by default; see ." +msgid "" +"If you are installing a diskless workstation, obviously, booting off the " +"local disk isn't a meaningful option, and this step will be skipped. You may wish to set the OpenBoot to boot from the network by " +"default; see ." msgstr "" #. Tag: para #: using-d-i.xml:2087 #, no-c-format -msgid "Note that multiple operating systems booting on a single machine is still something of a black art. This document does not even attempt to document the various boot managers, which vary by architecture and even by subarchitecture. You should see your boot manager's documentation for more information." +msgid "" +"Note that multiple operating systems booting on a single machine is still " +"something of a black art. This document does not even attempt to document " +"the various boot managers, which vary by architecture and even by " +"subarchitecture. You should see your boot manager's documentation for more " +"information." msgstr "" #. Tag: title @@ -1687,13 +2654,23 @@ msgstr "" #. Tag: para #: using-d-i.xml:2104 #, no-c-format -msgid "Before a boot loader is installed, the installer will attempt to probe for other operating systems which are installed on the machine. If it finds a supported operating system, you will be informed of this during the boot loader installation step, and the computer will be configured to boot this other operating system in addition to Debian." +msgid "" +"Before a boot loader is installed, the installer will attempt to probe for " +"other operating systems which are installed on the machine. If it finds a " +"supported operating system, you will be informed of this during the boot " +"loader installation step, and the computer will be configured to boot this " +"other operating system in addition to Debian." msgstr "" #. Tag: para #: using-d-i.xml:2112 #, no-c-format -msgid "Note that multiple operating systems booting on a single machine is still something of a black art. The automatic support for detecting and setting up boot loaders to boot other operating systems varies by architecture and even by subarchitecture. If it does not work you should consult your boot manager's documentation for more information." +msgid "" +"Note that multiple operating systems booting on a single machine is still " +"something of a black art. The automatic support for detecting and setting up " +"boot loaders to boot other operating systems varies by architecture and even " +"by subarchitecture. If it does not work you should consult your boot " +"manager's documentation for more information." msgstr "" #. Tag: title @@ -1705,7 +2682,15 @@ msgstr "" #. Tag: para #: using-d-i.xml:2131 #, no-c-format -msgid "If you have booted from SRM, if you select this option, the installer will write aboot to the first sector of the disk on which you installed Debian. Be very careful — it is not possible to boot multiple operating systems (e.g. GNU/Linux, Free/Open/NetBSD, OSF/1 a.k.a. Digital Unix a.k.a. Tru64 Unix, or OpenVMS) from the same disk. If you also have a different operating system installed on the disk where you have installed Debian, you will have to boot GNU/Linux from a floppy instead." +msgid "" +"If you have booted from SRM, if you select this option, the installer will " +"write aboot to the first sector of the disk on which you " +"installed Debian. Be very careful — it is " +"not possible to boot multiple operating systems (e.g. " +"GNU/Linux, Free/Open/NetBSD, OSF/1 a.k.a. Digital Unix a.k.a. Tru64 Unix, or " +"OpenVMS) from the same disk. If you also have a different operating system " +"installed on the disk where you have installed Debian, you will have to boot " +"GNU/Linux from a floppy instead." msgstr "" #. Tag: title @@ -1717,7 +2702,12 @@ msgstr "" #. Tag: para #: using-d-i.xml:2152 #, no-c-format -msgid "The bootloader on PA-RISC is palo. PALO is similar in configuration and usage to LILO, with a few exceptions. First of all, PALO allows you to boot any kernel image on your boot partition. This is because PALO can actually read Linux partitions." +msgid "" +"The bootloader on PA-RISC is palo. PALO is " +"similar in configuration and usage to LILO, with a few " +"exceptions. First of all, PALO allows you to boot any " +"kernel image on your boot partition. This is because PALO " +"can actually read Linux partitions." msgstr "" #. Tag: para @@ -1735,19 +2725,27 @@ msgstr "" #. Tag: para #: using-d-i.xml:2175 #, no-c-format -msgid "The main &architecture; boot loader is called grub. Grub is a flexible and robust boot loader and a good default choice for newbies and old hands alike." +msgid "" +"The main &architecture; boot loader is called grub. Grub is a " +"flexible and robust boot loader and a good default choice for newbies and " +"old hands alike." msgstr "" #. Tag: para #: using-d-i.xml:2181 #, no-c-format -msgid "By default, grub will be installed into the Master Boot Record (MBR), where it will take over complete control of the boot process. If you prefer, you can install it elsewhere. See the grub manual for complete information." +msgid "" +"By default, grub will be installed into the Master Boot Record (MBR), where " +"it will take over complete control of the boot process. If you prefer, you " +"can install it elsewhere. See the grub manual for complete information." msgstr "" #. Tag: para #: using-d-i.xml:2187 #, no-c-format -msgid "If you do not want to install grub at all, use the Back button to get to the main menu, and from there select whatever bootloader you would like to use." +msgid "" +"If you do not want to install grub at all, use the Back button to get to the " +"main menu, and from there select whatever bootloader you would like to use." msgstr "" #. Tag: title @@ -1759,19 +2757,30 @@ msgstr "" #. Tag: para #: using-d-i.xml:2203 #, no-c-format -msgid "The second &architecture; boot loader is called LILO. It is an old complex program which offers lots of functionality, including DOS, Windows, and OS/2 boot management. Please carefully read the instructions in the directory /usr/share/doc/lilo/ if you have special needs; also see the LILO mini-HOWTO." +msgid "" +"The second &architecture; boot loader is called LILO. It is " +"an old complex program which offers lots of functionality, including DOS, " +"Windows, and OS/2 boot management. Please carefully read the instructions in " +"the directory /usr/share/doc/lilo/ if you have special " +"needs; also see the LILO mini-HOWTO." msgstr "" #. Tag: para #: using-d-i.xml:2213 #, no-c-format -msgid "Currently the LILO installation will only create menu entries for other operating systems if these can be chainloaded. This means you may have to manually add a menu entry for operating systems like GNU/Linux and GNU/Hurd after the installation." +msgid "" +"Currently the LILO installation will only create menu entries for other " +"operating systems if these can be chainloaded. This " +"means you may have to manually add a menu entry for operating systems like " +"GNU/Linux and GNU/Hurd after the installation." msgstr "" #. Tag: para #: using-d-i.xml:2221 #, no-c-format -msgid "&d-i; presents you three choices where to install the LILO boot loader:" +msgid "" +"&d-i; presents you three choices where to install the LILO boot loader:" msgstr "" #. Tag: term @@ -1783,7 +2792,9 @@ msgstr "" #. Tag: para #: using-d-i.xml:2228 #, no-c-format -msgid "This way the LILO will take complete control of the boot process." +msgid "" +"This way the LILO will take complete control of the boot " +"process." msgstr "" #. Tag: term @@ -1795,7 +2806,10 @@ msgstr "" #. Tag: para #: using-d-i.xml:2235 #, no-c-format -msgid "Choose this if you want to use another boot manager. LILO will install itself at the beginning of the new Debian partition and it will serve as a secondary boot loader." +msgid "" +"Choose this if you want to use another boot manager. LILO " +"will install itself at the beginning of the new Debian partition and it will " +"serve as a secondary boot loader." msgstr "" #. Tag: term @@ -1807,13 +2821,25 @@ msgstr "" #. Tag: para #: using-d-i.xml:2244 #, no-c-format -msgid "Useful for advanced users who want to install LILO somewhere else. In this case you will be asked for desired location. You can use devfs style names, such as those that start with /dev/ide, /dev/scsi, and /dev/discs, as well as traditional names, such as /dev/hda or /dev/sda." +msgid "" +"Useful for advanced users who want to install LILO " +"somewhere else. In this case you will be asked for desired location. You can " +"use devfs style names, such as those that start with /dev/ide, /dev/scsi, and /dev/discs, as well as traditional names, such as /dev/hda or /dev/sda." msgstr "" #. Tag: para #: using-d-i.xml:2256 #, no-c-format -msgid "If you can no longer boot into Windows 9x (or DOS) after this step, you'll need to use a Windows 9x (MS-DOS) boot disk and use the fdisk /mbr command to reinstall the MS-DOS master boot record — however, this means that you'll need to use some other way to get back into Debian! For more information on this please read ." +msgid "" +"If you can no longer boot into Windows 9x (or DOS) after this step, you'll " +"need to use a Windows 9x (MS-DOS) boot disk and use the fdisk /" +"mbr command to reinstall the MS-DOS master boot record — " +"however, this means that you'll need to use some other way to get back into " +"Debian! For more information on this please read ." msgstr "" #. Tag: title @@ -1825,13 +2851,30 @@ msgstr "" #. Tag: para #: using-d-i.xml:2275 #, no-c-format -msgid "The &architecture; boot loader is called elilo. It is modeled on the lilo boot loader for the x86 architecture and uses a similar configuration file. However, instead of writing an MBR or partition boot record to the disk, it copies the necessary files to a separate FAT formatted disk partition and modifies the EFI Boot Manager menu in the firmware to point to the files in the EFI partition. The elilo boot loader is really in two parts. The /usr/sbin/elilo command manages the partition and copies file into it. The elilo.efi program is copied into the EFI partition and then run by the EFI Boot Manager to actually do the work of loading and starting the Linux kernel." +msgid "" +"The &architecture; boot loader is called elilo. It is modeled " +"on the lilo boot loader for the x86 architecture and uses a " +"similar configuration file. However, instead of writing an MBR or partition " +"boot record to the disk, it copies the necessary files to a separate FAT " +"formatted disk partition and modifies the EFI Boot Manager menu in the firmware to point to the files in the EFI " +"partition. The elilo boot loader is really in two parts. " +"The /usr/sbin/elilo command manages the partition and " +"copies file into it. The elilo.efi program is copied " +"into the EFI partition and then run by the EFI Boot Manager " +"to actually do the work of loading and starting the Linux kernel." msgstr "" #. Tag: para #: using-d-i.xml:2291 #, no-c-format -msgid "The elilo configuration and installation is done as the last step of installing the packages of the base installation. &d-i; will present you with a list of potential disk partitions that it has found suitable for an EFI partition. Select the partition you set up earlier in the installation, typically a partition on the same disk that contains your root filesystem." +msgid "" +"The elilo configuration and installation is done as the last " +"step of installing the packages of the base installation. &d-i; will present " +"you with a list of potential disk partitions that it has found suitable for " +"an EFI partition. Select the partition you set up earlier in the " +"installation, typically a partition on the same disk that contains your " +"root filesystem." msgstr "" #. Tag: title @@ -1843,7 +2886,13 @@ msgstr "" #. Tag: para #: using-d-i.xml:2305 #, no-c-format -msgid "The criteria for selecting a partition is that it is FAT format filesystem with its boot flag set. &d-i; may show multiple choices depending on what it finds from scanning all of the disks of the system including EFI partitions of other system disks and EFI diagnostic partitions. Remember, the elilo may format the partition during the installation, erasing any previous contents!" +msgid "" +"The criteria for selecting a partition is that it is FAT format filesystem " +"with its boot flag set. &d-i; may show multiple choices " +"depending on what it finds from scanning all of the disks of the system " +"including EFI partitions of other system disks and EFI diagnostic " +"partitions. Remember, the elilo may format the partition " +"during the installation, erasing any previous contents!" msgstr "" #. Tag: title @@ -1855,7 +2904,19 @@ msgstr "" #. Tag: para #: using-d-i.xml:2322 #, no-c-format -msgid "The EFI partition is a FAT filesystem format partition on one of the hard disks of the system, usually the same disk that contains the root filesystem. It is normally not mounted on a running system as it is only needed by the EFI Boot Manager to load the system and the installer part of the elilo writes to the filesystem directly. The /usr/sbin/elilo utility writes the following files into the efi/debian directory of the EFI partition during the installation. Note that the EFI Boot Manager would find these files using the path fsn:\\efi\\debian. There may be other files in this filesystem as well over time as the system is updated or re-configured." +msgid "" +"The EFI partition is a FAT filesystem format partition on one of the hard " +"disks of the system, usually the same disk that contains the root filesystem. It is normally not mounted on a running system as it " +"is only needed by the EFI Boot Manager to load the system and " +"the installer part of the elilo writes to the filesystem " +"directly. The /usr/sbin/elilo utility writes the " +"following files into the efi/debian directory of the " +"EFI partition during the installation. Note that the EFI Boot " +"Manager would find these files using the path " +"fsn:\\efi\\debian. There may " +"be other files in this filesystem as well over time as the system is updated " +"or re-configured." msgstr "" #. Tag: filename @@ -1867,7 +2928,10 @@ msgstr "" #. Tag: para #: using-d-i.xml:2345 #, no-c-format -msgid "This is the configuration file read by the boot loader when it starts. It is a copy of the /etc/elilo.conf with the filenames re-written to refer to files in the EFI partition." +msgid "" +"This is the configuration file read by the boot loader when it starts. It is " +"a copy of the /etc/elilo.conf with the filenames re-" +"written to refer to files in the EFI partition." msgstr "" #. Tag: filename @@ -1879,7 +2943,11 @@ msgstr "" #. Tag: para #: using-d-i.xml:2355 #, no-c-format -msgid "This is the boot loader program that the EFI Boot Manager runs to boot the system. It is the program behind the Debian GNU/Linux menu item of the EFI Boot Manager command menu." +msgid "" +"This is the boot loader program that the EFI Boot Manager " +"runs to boot the system. It is the program behind the Debian " +"GNU/Linux menu item of the EFI Boot Manager " +"command menu." msgstr "" #. Tag: filename @@ -1891,7 +2959,11 @@ msgstr "" #. Tag: para #: using-d-i.xml:2366 #, no-c-format -msgid "This is the initial root filesystem used to boot the kernel. It is a copy of the file referenced in the /etc/elilo.conf. In a standard Debian installation it would be the file in /boot pointed to by the symbolic link /initrd.img." +msgid "" +"This is the initial root filesystem used to boot the kernel. It is a copy of " +"the file referenced in the /etc/elilo.conf. In a " +"standard Debian installation it would be the file in /boot pointed to by the symbolic link /initrd.img." msgstr "" #. Tag: filename @@ -1903,7 +2975,10 @@ msgstr "" #. Tag: para #: using-d-i.xml:2379 #, no-c-format -msgid "This is a small text file warning you that the contents of the directory are managed by the elilo and that any local changes would be lost at the next time /usr/sbin/elilo is run." +msgid "" +"This is a small text file warning you that the contents of the directory are " +"managed by the elilo and that any local changes would be " +"lost at the next time /usr/sbin/elilo is run." msgstr "" #. Tag: filename @@ -1915,7 +2990,11 @@ msgstr "" #. Tag: para #: using-d-i.xml:2390 #, no-c-format -msgid "This is the compressed kernel itself. It is a copy of the file referenced in the /etc/elilo.conf. In a standard Debian installation it would be the file in /boot pointed to by the symbolic link /vmlinuz." +msgid "" +"This is the compressed kernel itself. It is a copy of the file referenced in " +"the /etc/elilo.conf. In a standard Debian installation " +"it would be the file in /boot pointed to by the " +"symbolic link /vmlinuz." msgstr "" #. Tag: title @@ -1928,13 +3007,25 @@ msgstr "" #: using-d-i.xml:2411 #, no-c-format msgid "" -"The boot loader on SGI machines is arcboot. It has to be installed on the same hard disk as the kernel (this is done automatically by the installer). Arcboot supports different configurations which are set up in /etc/arcboot.conf. Each configuration has a unique name, the default setup as created by the installer is linux. After arcboot has been installed, the system can be booted from hard disk by setting some firmware environment variables entering \n" -" setenv SystemPartition scsi(scsi)disk(disk)rdisk(0)partition(0)\n" -" setenv OSLoadPartition scsi(scsi)disk(disk)rdisk(0)partition(partnr)\n" +"The boot loader on SGI machines is arcboot. It has to be " +"installed on the same hard disk as the kernel (this is done automatically by " +"the installer). Arcboot supports different configurations which are set up " +"in /etc/arcboot.conf. Each configuration has a unique " +"name, the default setup as created by the installer is linux. " +"After arcboot has been installed, the system can be booted from hard disk by " +"setting some firmware environment variables entering " +"\n" +" setenv SystemPartition scsi(scsi)disk" +"(disk)rdisk(0)partition(0)\n" +" setenv OSLoadPartition scsi(scsi)disk" +"(disk)rdisk(0)partition(partnr)\n" " setenv OSLoader arcboot\n" -" setenv OSLoadFilename config\n" +" setenv OSLoadFilename config\n" " setenv AutoLoad yes\n" -" on the firmware prompt, and then typing boot." +" on the firmware prompt, and then typing " +"boot." msgstr "" #. Tag: replaceable @@ -1946,7 +3037,9 @@ msgstr "" #. Tag: para #: using-d-i.xml:2431 #, no-c-format -msgid "is the SCSI bus to be booted from, this is 0 for the onboard controllers" +msgid "" +"is the SCSI bus to be booted from, this is 0 for the " +"onboard controllers" msgstr "" #. Tag: replaceable @@ -1958,7 +3051,9 @@ msgstr "" #. Tag: para #: using-d-i.xml:2440 #, no-c-format -msgid "is the SCSI ID of the hard disk on which arcboot is installed" +msgid "" +"is the SCSI ID of the hard disk on which arcboot is " +"installed" msgstr "" #. Tag: replaceable @@ -1970,7 +3065,9 @@ msgstr "" #. Tag: para #: using-d-i.xml:2449 #, no-c-format -msgid "is the number of the partition on which /etc/arcboot.conf resides" +msgid "" +"is the number of the partition on which /etc/arcboot.conf resides" msgstr "" #. Tag: replaceable @@ -1982,7 +3079,9 @@ msgstr "" #. Tag: para #: using-d-i.xml:2458 #, no-c-format -msgid "is the name of the configuration entry in /etc/arcboot.conf, which is linux by default." +msgid "" +"is the name of the configuration entry in /etc/arcboot.conf, which is linux by default." msgstr "" #. Tag: title @@ -1995,8 +3094,16 @@ msgstr "" #: using-d-i.xml:2480 #, no-c-format msgid "" -"The boot loader on DECstations is DELO. It has to be installed on the same hard disk as the kernel (this is done automatically by the installer). DELO supports different configurations which are set up in /etc/delo.conf. Each configuration has a unique name, the default setup as created by the installer is linux. After DELO has been installed, the system can be booted from hard disk by entering \n" -"boot #/rzid partnr/name\n" +"The boot loader on DECstations is DELO. It has to be " +"installed on the same hard disk as the kernel (this is done automatically by " +"the installer). DELO supports different configurations which are set up in " +"/etc/delo.conf. Each configuration has a unique name, " +"the default setup as created by the installer is linux. After " +"DELO has been installed, the system can be booted from hard disk by entering " +"\n" +"boot #/rzid " +"partnr/name\n" " on the firmware prompt." msgstr "" @@ -2009,7 +3116,9 @@ msgstr "" #. Tag: para #: using-d-i.xml:2500 #, no-c-format -msgid "is the TurboChannel device to be booted from, on most DECstations this is 3 for the onboard controllers" +msgid "" +"is the TurboChannel device to be booted from, on most DECstations this is " +"3 for the onboard controllers" msgstr "" #. Tag: replaceable @@ -2021,13 +3130,16 @@ msgstr "" #. Tag: para #: using-d-i.xml:2509 #, no-c-format -msgid "is the SCSI ID of the hard disk on which DELO is installed" +msgid "" +"is the SCSI ID of the hard disk on which DELO is installed" msgstr "" #. Tag: para #: using-d-i.xml:2518 #, no-c-format -msgid "is the number of the partition on which /etc/delo.conf resides" +msgid "" +"is the number of the partition on which /etc/delo.conf " +"resides" msgstr "" #. Tag: replaceable @@ -2039,13 +3151,17 @@ msgstr "" #. Tag: para #: using-d-i.xml:2527 #, no-c-format -msgid "is the name of the configuration entry in /etc/delo.conf, which is linux by default." +msgid "" +"is the name of the configuration entry in /etc/delo.conf, which is linux by default." msgstr "" #. Tag: para #: using-d-i.xml:2537 #, no-c-format -msgid "In case /etc/delo.conf is on the first partition on the disk and the default configuration shall be booted, it is sufficient to use" +msgid "" +"In case /etc/delo.conf is on the first partition on the " +"disk and the default configuration shall be booted, it is sufficient to use" msgstr "" #. Tag: screen @@ -2063,7 +3179,14 @@ msgstr "" #. Tag: para #: using-d-i.xml:2554 #, no-c-format -msgid "Newer (mid 1998 and on) PowerMacs use yaboot as their boot loader. The installer will set up yaboot automatically, so all you need is a small 820k partition named bootstrap with type Apple_Bootstrap created back in the partitioning component. If this step completes successfully then your disk should now be bootable and OpenFirmware will be set to boot &debian;." +msgid "" +"Newer (mid 1998 and on) PowerMacs use yaboot as their " +"boot loader. The installer will set up yaboot " +"automatically, so all you need is a small 820k partition named " +"bootstrap with type Apple_Bootstrap " +"created back in the partitioning component. If this step completes " +"successfully then your disk should now be bootable and OpenFirmware will be " +"set to boot &debian;." msgstr "" #. Tag: title @@ -2075,7 +3198,11 @@ msgstr "" #. Tag: para #: using-d-i.xml:2573 #, no-c-format -msgid "The boot loader for OldWorld Power Macintosh machines is quik. You can also use it on CHRP. The installer will attempt to set up quik automatically. The setup has been known to work on 7200, 7300, and 7600 Powermacs, and on some Power Computing clones." +msgid "" +"The boot loader for OldWorld Power Macintosh machines is quik. You can also use it on CHRP. The installer will attempt to set up " +"quik automatically. The setup has been known to work on " +"7200, 7300, and 7600 Powermacs, and on some Power Computing clones." msgstr "" #. Tag: title @@ -2087,7 +3214,12 @@ msgstr "" #. Tag: para #: using-d-i.xml:2590 #, no-c-format -msgid "The boot loader on &arch-title; is zipl. ZIPL is similar in configuration and usage to LILO, with a few exceptions. Please take a look at LINUX for &arch-title; Device Drivers and Installation Commands from IBM's developerWorks web site if you want to know more about ZIPL." +msgid "" +"The boot loader on &arch-title; is zipl. ZIPL is similar in configuration and usage to LILO, " +"with a few exceptions. Please take a look at LINUX for &arch-title; " +"Device Drivers and Installation Commands from IBM's developerWorks " +"web site if you want to know more about ZIPL." msgstr "" #. Tag: title @@ -2099,7 +3231,19 @@ msgstr "" #. Tag: para #: using-d-i.xml:2609 #, no-c-format -msgid "The standard &architecture; boot loader is called silo. It is documented in /usr/share/doc/silo/. SILO is similar in configuration and usage to LILO, with a few exceptions. First of all, SILO allows you to boot any kernel image on your drive, even if it is not listed in /etc/silo.conf. This is because SILO can actually read Linux partitions. Also, /etc/silo.conf is read at boot time, so there is no need to rerun silo after installing a new kernel like you would with LILO. SILO can also read UFS partitions, which means it can boot SunOS/Solaris partitions as well. This is useful if you want to install GNU/Linux alongside an existing SunOS/Solaris install." +msgid "" +"The standard &architecture; boot loader is called silo. It is " +"documented in /usr/share/doc/silo/. SILO is similar in configuration and usage to LILO, " +"with a few exceptions. First of all, SILO allows you to " +"boot any kernel image on your drive, even if it is not listed in /" +"etc/silo.conf. This is because SILO can " +"actually read Linux partitions. Also, /etc/silo.conf is " +"read at boot time, so there is no need to rerun silo " +"after installing a new kernel like you would with LILO. " +"SILO can also read UFS partitions, which means it can " +"boot SunOS/Solaris partitions as well. This is useful if you want to install " +"GNU/Linux alongside an existing SunOS/Solaris install." msgstr "" #. Tag: title @@ -2111,13 +3255,27 @@ msgstr "" #. Tag: para #: using-d-i.xml:2636 #, no-c-format -msgid "This option can be used to complete the installation even when no boot loader is to be installed, either because the arch/subarch doesn't provide one, or because none is desired (e.g. you will use existing boot loader). This option is especially useful for Macintosh, Atari, and Amiga systems, where the original operating system must be maintained on the box and used to boot GNU/Linux." +msgid "" +"This option can be used to complete the installation even when no boot " +"loader is to be installed, either because the arch/subarch doesn't provide " +"one, or because none is desired (e.g. you will use existing boot loader). " +"This option is especially useful for Macintosh, Atari, " +"and Amiga systems, where the original operating system must be maintained on " +"the box and used to boot GNU/Linux." msgstr "" #. Tag: para #: using-d-i.xml:2645 #, no-c-format -msgid "If you plan to manually configure your bootloader, you should check the name of the installed kernel in /target/boot. You should also check that directory for the presence of an initrd; if one is present, you will probably have to instruct your bootloader to use it. Other information you will need are the disk and partition you selected for your / filesystem and, if you chose to install /boot on a separate partition, also your /boot filesystem." +msgid "" +"If you plan to manually configure your bootloader, you should check the name " +"of the installed kernel in /target/boot. You should " +"also check that directory for the presence of an initrd; if one is present, you will probably have to instruct your " +"bootloader to use it. Other information you will need are the disk and " +"partition you selected for your / filesystem and, if " +"you chose to install /boot on a separate partition, " +"also your /boot filesystem." msgstr "" #. Tag: title @@ -2129,7 +3287,9 @@ msgstr "" #. Tag: para #: using-d-i.xml:2663 #, no-c-format -msgid "These are the last bits to do before rebooting to your new system. It mostly consists of tidying up after the &d-i;." +msgid "" +"These are the last bits to do before rebooting to your new system. It mostly " +"consists of tidying up after the &d-i;." msgstr "" #. Tag: title @@ -2141,13 +3301,21 @@ msgstr "" #. Tag: para #: using-d-i.xml:2677 #, no-c-format -msgid "This is the last step in the initial Debian installation process. You will be prompted to remove the boot media (CD, floppy, etc) that you used to boot the installer. The installer will do any last minute tasks, and then reboot into your new Debian system." +msgid "" +"This is the last step in the initial Debian installation process. You will " +"be prompted to remove the boot media (CD, floppy, etc) that you used to boot " +"the installer. The installer will do any last minute tasks, and then reboot " +"into your new Debian system." msgstr "" #. Tag: para #: using-d-i.xml:2684 #, no-c-format -msgid "Select the Finish the installation menu item which will halt the system because rebooting is not supported on &arch-title; in this case. You then need to IPL GNU/Linux from the DASD which you selected for the root filesystem during the first steps of the installation." +msgid "" +"Select the Finish the installation menu item " +"which will halt the system because rebooting is not supported on &arch-" +"title; in this case. You then need to IPL GNU/Linux from the DASD which you " +"selected for the root filesystem during the first steps of the installation." msgstr "" #. Tag: title @@ -2159,7 +3327,10 @@ msgstr "" #. Tag: para #: using-d-i.xml:2699 #, no-c-format -msgid "The components listed in this section are usually not involved in the installation process, but are waiting in the background to help the user in case something goes wrong." +msgid "" +"The components listed in this section are usually not involved in the " +"installation process, but are waiting in the background to help the user in " +"case something goes wrong." msgstr "" #. Tag: title @@ -2171,13 +3342,21 @@ msgstr "" #. Tag: para #: using-d-i.xml:2714 #, no-c-format -msgid "If the installation is successful, the logfiles created during the installation process will be automatically saved to /var/log/installer/ on your new Debian system." +msgid "" +"If the installation is successful, the logfiles created during the " +"installation process will be automatically saved to /var/log/" +"installer/ on your new Debian system." msgstr "" #. Tag: para #: using-d-i.xml:2721 #, no-c-format -msgid "Choosing Save debug logs from the main menu allows you to save the log files to a floppy disk, network, hard disk, or other media. This can be useful if you encounter fatal problems during the installation and wish to study the logs on another system or attach them to an installation report." +msgid "" +"Choosing Save debug logs from the main menu " +"allows you to save the log files to a floppy disk, network, hard disk, or " +"other media. This can be useful if you encounter fatal problems during the " +"installation and wish to study the logs on another system or attach them to " +"an installation report." msgstr "" #. Tag: title @@ -2189,19 +3368,40 @@ msgstr "" #. Tag: para #: using-d-i.xml:2744 #, no-c-format -msgid "There is an Execute a Shell item on the menu. If the menu is not available when you need to use the shell, press Left Alt F2 (on a Mac keyboard, Option F2 ) to switch to the second virtual console. That's the Alt key on the left-hand side of the space bar, and the F2 function key, at the same time. This is a separate window running a Bourne shell clone called ash." +msgid "" +"There is an Execute a Shell item on the menu. If " +"the menu is not available when you need to use the shell, press " +"Left Alt F2 (on a Mac " +"keyboard, Option F2 ) " +"to switch to the second virtual console. That's the " +"Alt key on the left-hand side of the space bar, and the F2 function key, at the same time. This is " +"a separate window running a Bourne shell clone called ash." msgstr "" #. Tag: para #: using-d-i.xml:2756 #, no-c-format -msgid "At this point you are booted from the RAM disk, and there is a limited set of Unix utilities available for your use. You can see what programs are available with the command ls /bin /sbin /usr/bin /usr/sbin and by typing help. The text editor is nano. The shell has some nice features like autocompletion and history." +msgid "" +"At this point you are booted from the RAM disk, and there is a limited set " +"of Unix utilities available for your use. You can see what programs are " +"available with the command ls /bin /sbin /usr/bin /usr/sbin and by typing help. The text editor is " +"nano. The shell has some nice features like " +"autocompletion and history." msgstr "" #. Tag: para #: using-d-i.xml:2765 #, no-c-format -msgid "Use the menus to perform any task that they are able to do — the shell and commands are only there in case something goes wrong. In particular, you should always use the menus, not the shell, to activate your swap partition, because the menu software can't detect that you've done this from the shell. Press Left Alt F1 to get back to menus, or type exit if you used a menu item to open the shell." +msgid "" +"Use the menus to perform any task that they are able to do — the shell " +"and commands are only there in case something goes wrong. In particular, you " +"should always use the menus, not the shell, to activate your swap partition, " +"because the menu software can't detect that you've done this from the shell. " +"Press Left Alt F1 to " +"get back to menus, or type exit if you used a menu item " +"to open the shell." msgstr "" #. Tag: title @@ -2213,63 +3413,119 @@ msgstr "" #. Tag: para #: using-d-i.xml:2786 #, no-c-format -msgid "One of the more interesting components is network-console. It allows you to do a large part of the installation over the network via SSH. The use of the network implies you will have to perform the first steps of the installation from the console, at least to the point of setting up the networking. (Although you can automate that part with .)" +msgid "" +"One of the more interesting components is network-console. It allows you to do a large part of the installation over the " +"network via SSH. The use of the network implies you will have to perform the " +"first steps of the installation from the console, at least to the point of " +"setting up the networking. (Although you can automate that part with .)" msgstr "" #. Tag: para #: using-d-i.xml:2796 #, no-c-format -msgid "This component is not loaded into the main installation menu by default, so you have to explicitly ask for it. If you are installing from CD, you need to boot with medium priority or otherwise invoke the main installation menu and choose Load installer components from CD and from the list of additional components select network-console: Continue installation remotely using SSH. Successful load is indicated by a new menu entry called Continue installation remotely using SSH." +msgid "" +"This component is not loaded into the main installation menu by default, so " +"you have to explicitly ask for it. If you are installing from CD, you need " +"to boot with medium priority or otherwise invoke the main installation menu " +"and choose Load installer components from CD and " +"from the list of additional components select network-console: " +"Continue installation remotely using SSH. Successful load is " +"indicated by a new menu entry called Continue installation " +"remotely using SSH." msgstr "" #. Tag: para #: using-d-i.xml:2809 #, no-c-format -msgid "For installations on &arch-title;, this is the default method after setting up the network." +msgid "" +"For installations on &arch-title;, this is the default method after setting " +"up the network." msgstr "" #. Tag: para #: using-d-i.xml:2814 #, no-c-format -msgid "After selecting this new entry, you You will be asked for a new password to be used for connecting to the installation system and for its confirmation. That's all. Now you should see a screen which instructs you to login remotely as the user installer with the password you just provided. Another important detail to notice on this screen is the fingerprint of this system. You need to transfer the fingerprint securely to the person who will continue the installation remotely." +msgid "" +"After selecting this new entry, you " +"You will be asked for a new password to be " +"used for connecting to the installation system and for its confirmation. " +"That's all. Now you should see a screen which instructs you to login " +"remotely as the user installer with the password you " +"just provided. Another important detail to notice on this screen is the " +"fingerprint of this system. You need to transfer the fingerprint securely to " +"the person who will continue the installation remotely." msgstr "" #. Tag: para #: using-d-i.xml:2826 #, no-c-format -msgid "Should you decide to continue with the installation locally, you can always press &enterkey;, which will bring you back to the main menu, where you can select another component." +msgid "" +"Should you decide to continue with the installation locally, you can always " +"press &enterkey;, which will bring you back to the main menu, where you can " +"select another component." msgstr "" #. Tag: para #: using-d-i.xml:2832 #, no-c-format msgid "" -"Now let's switch to the other side of the wire. As a prerequisite, you need to configure your terminal for UTF-8 encoding, because that is what the installation system uses. If you do not, remote installation will be still possible, but you may encounter strange display artefacts like destroyed dialog borders or unreadable non-ascii characters. Establishing a connection with the installation system is as simple as typing: \n" -"$ ssh -l installer install_host\n" -" Where install_host is either the name or IP address of the computer being installed. Before the actual login the fingerprint of the remote system will be displayed and you will have to confirm that it is correct." +"Now let's switch to the other side of the wire. As a prerequisite, you need " +"to configure your terminal for UTF-8 encoding, because that is what the " +"installation system uses. If you do not, remote installation will be still " +"possible, but you may encounter strange display artefacts like destroyed " +"dialog borders or unreadable non-ascii characters. Establishing a connection " +"with the installation system is as simple as typing: " +"\n" +"$ ssh -l installer install_host\n" +" Where install_host is " +"either the name or IP address of the computer being installed. Before the " +"actual login the fingerprint of the remote system will be displayed and you " +"will have to confirm that it is correct." msgstr "" #. Tag: para #: using-d-i.xml:2849 #, no-c-format -msgid "If you install several computers in turn and they happen to have the same IP address or hostname, ssh will refuse to connect to such host. The reason is that it will have different fingerprint, which is usually a sign of a spoofing attack. If you are sure this is not the case, you will need to delete the relevant line from ~/.ssh/known_hosts and try again." +msgid "" +"If you install several computers in turn and they happen to have the same IP " +"address or hostname, ssh will refuse to connect to such " +"host. The reason is that it will have different fingerprint, which is " +"usually a sign of a spoofing attack. If you are sure this is not the case, " +"you will need to delete the relevant line from ~/.ssh/known_hosts and try again." msgstr "" #. Tag: para #: using-d-i.xml:2858 #, no-c-format -msgid "After the login you will be presented with an initial screen where you have two possibilities called Start menu and Start shell. The former brings you to the main installer menu, where you can continue with the installation as usual. The latter starts a shell from which you can examine and possibly fix the remote system. You should only start one SSH session for the installation menu, but may start multiple sessions for shells." +msgid "" +"After the login you will be presented with an initial screen where you have " +"two possibilities called Start menu and " +"Start shell. The former brings you to the main " +"installer menu, where you can continue with the installation as usual. The " +"latter starts a shell from which you can examine and possibly fix the remote " +"system. You should only start one SSH session for the installation menu, but " +"may start multiple sessions for shells." msgstr "" #. Tag: para #: using-d-i.xml:2868 #, no-c-format -msgid "After you have started the installation remotely over SSH, you should not go back to the installation session running on the local console. Doing so may corrupt the database that holds the configuration of the new system. This in turn may result in a failed installation or problems with the installed system." +msgid "" +"After you have started the installation remotely over SSH, you should not go " +"back to the installation session running on the local console. Doing so may " +"corrupt the database that holds the configuration of the new system. This in " +"turn may result in a failed installation or problems with the installed " +"system." msgstr "" #. Tag: para #: using-d-i.xml:2876 #, no-c-format -msgid "Also, if you are running the SSH session from an X terminal, you should not resize the window as that will result in the connection being terminated." +msgid "" +"Also, if you are running the SSH session from an X terminal, you should not " +"resize the window as that will result in the connection being terminated." msgstr "" - -- cgit v1.2.3