diff options
Diffstat (limited to 'po/hu')
| -rw-r--r-- | po/hu/hardware.po | 1691 | ||||
| -rw-r--r-- | po/hu/partitioning.po | 978 | ||||
| -rw-r--r-- | po/hu/random-bits.po | 483 |
3 files changed, 2436 insertions, 716 deletions
diff --git a/po/hu/hardware.po b/po/hu/hardware.po index e293c9426..afdcb4002 100644 --- a/po/hu/hardware.po +++ b/po/hu/hardware.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n" -"POT-Creation-Date: 2006-09-08 22:58+0000\n" +"POT-Creation-Date: 2006-10-11 02:03+0000\n" "PO-Revision-Date: 2006-09-12 23:59+0100\n" "Last-Translator: SZERVÁC Attila <sas@321.hu>\n" "Language-Team: Hungarian <debian-l10n-hungarian@lists.debian>\n" @@ -25,8 +25,14 @@ msgstr "Rendszerkövetelmények" #. Tag: para #: hardware.xml:7 #, no-c-format -msgid "This section contains information about what hardware you need to get started with Debian. You will also find links to further information about hardware supported by GNU and Linux." -msgstr "E fejezet leírja a Debian használatához szükséges hardvert. A GNU és Linux által támogatott hardverekről szóló további információkra utaló hivatkozásokat is ad." +msgid "" +"This section contains information about what hardware you need to get " +"started with Debian. You will also find links to further information about " +"hardware supported by GNU and Linux." +msgstr "" +"E fejezet leírja a Debian használatához szükséges hardvert. A GNU és Linux " +"által támogatott hardverekről szóló további információkra utaló " +"hivatkozásokat is ad." #. Tag: title #: hardware.xml:20 @@ -37,14 +43,32 @@ msgstr "Támogatott hardver" #. Tag: para #: hardware.xml:21 #, no-c-format -msgid "Debian does not impose hardware requirements beyond the requirements of the Linux kernel and the GNU tool-sets. Therefore, any architecture or platform to which the Linux kernel, libc, <command>gcc</command>, etc. have been ported, and for which a Debian port exists, can run Debian. Please refer to the Ports pages at <ulink url=\"&url-ports;\"></ulink> for more details on &arch-title; architecture systems which have been tested with Debian." -msgstr "A Debian nem igényel a Linux és a GNU eszköz-készletek által kívántnál több hardvert. Ezért minden gépen, melyen a Linux kernel, a libc, a <command>gcc</command> és a többi fut, és melyre a Debian portolva van, futtatható a Debian. Lásd a Debian portok oldalát a <ulink url=\"&url-ports;\"></ulink> címen a jelen &arch-title; architektúra rendszerekről, melyek teszteltek a Debian rendszerrel." +msgid "" +"Debian does not impose hardware requirements beyond the requirements of the " +"Linux kernel and the GNU tool-sets. Therefore, any architecture or platform " +"to which the Linux kernel, libc, <command>gcc</command>, etc. have been " +"ported, and for which a Debian port exists, can run Debian. Please refer to " +"the Ports pages at <ulink url=\"&url-ports;\"></ulink> for more details on " +"&arch-title; architecture systems which have been tested with Debian." +msgstr "" +"A Debian nem igényel a Linux és a GNU eszköz-készletek által kívántnál több " +"hardvert. Ezért minden gépen, melyen a Linux kernel, a libc, a <command>gcc</" +"command> és a többi fut, és melyre a Debian portolva van, futtatható a " +"Debian. Lásd a Debian portok oldalát a <ulink url=\"&url-ports;\"></ulink> " +"címen a jelen &arch-title; architektúra rendszerekről, melyek teszteltek a " +"Debian rendszerrel." #. Tag: para #: hardware.xml:32 #, no-c-format -msgid "Rather than attempting to describe all the different hardware configurations which are supported for &arch-title;, this section contains general information and pointers to where additional information can be found." -msgstr "A jelen, &arch-title; architektúra által támogatott összes különböző hardver konfiguráció leírásának megkísérlése helyett, e fejezet általános adatokat és még részletesebb adatokra való hivatkozásokat ad." +msgid "" +"Rather than attempting to describe all the different hardware configurations " +"which are supported for &arch-title;, this section contains general " +"information and pointers to where additional information can be found." +msgstr "" +"A jelen, &arch-title; architektúra által támogatott összes különböző hardver " +"konfiguráció leírásának megkísérlése helyett, e fejezet általános adatokat " +"és még részletesebb adatokra való hivatkozásokat ad." #. Tag: title #: hardware.xml:41 @@ -55,8 +79,13 @@ msgstr "Támogatott architektúrák" #. Tag: para #: hardware.xml:42 #, no-c-format -msgid "Debian &release; supports twelve major architectures and several variations of each architecture known as <quote>flavors</quote>." -msgstr "A Debian &release; 12 nagy architektúrát támogat és minden architektúra számos változatát, melyeket <quote>kivitelek</quote> (flavors) néven említünk." +msgid "" +"Debian &release; supports twelve major architectures and several variations " +"of each architecture known as <quote>flavors</quote>." +msgstr "" +"A Debian &release; 12 nagy architektúrát támogat és minden architektúra " +"számos változatát, melyeket <quote>kivitelek</quote> (flavors) néven " +"említünk." #. Tag: entry #: hardware.xml:53 @@ -251,29 +280,25 @@ msgid "r5k-ip32" msgstr "r5k-ip32" #. Tag: entry -#: hardware.xml:119 -#: hardware.xml:137 +#: hardware.xml:119 hardware.xml:137 #, no-c-format msgid "Broadcom BCM91250A (SWARM)" msgstr "Broadcom BCM91250A (SWARM)" #. Tag: entry -#: hardware.xml:120 -#: hardware.xml:138 +#: hardware.xml:120 hardware.xml:138 #, no-c-format msgid "sb1-bcm91250a" msgstr "sb1-bcm91250a" #. Tag: entry -#: hardware.xml:122 -#: hardware.xml:140 +#: hardware.xml:122 hardware.xml:140 #, no-c-format msgid "Broadcom BCM91480B (BigSur)" msgstr "Broadcom BCM91480B (BigSur)" #. Tag: entry -#: hardware.xml:123 -#: hardware.xml:141 +#: hardware.xml:123 hardware.xml:141 #, no-c-format msgid "sb1a-bcm91480b" msgstr "sb1a-bcm91480b" @@ -309,19 +334,13 @@ msgid "DECstation" msgstr "DECstation" #. Tag: entry -#: hardware.xml:133 -#: hardware.xml:1087 -#: hardware.xml:1102 -#: hardware.xml:1112 +#: hardware.xml:133 hardware.xml:1087 hardware.xml:1102 hardware.xml:1112 #, no-c-format msgid "r4k-kn04" msgstr "r4k-kn04" #. Tag: entry -#: hardware.xml:135 -#: hardware.xml:1082 -#: hardware.xml:1092 -#: hardware.xml:1097 +#: hardware.xml:135 hardware.xml:1082 hardware.xml:1092 hardware.xml:1097 #: hardware.xml:1107 #, no-c-format msgid "r3k-kn02" @@ -522,26 +541,42 @@ msgstr "szalag" #. Tag: para #: hardware.xml:201 #, no-c-format -msgid "This document covers installation for the <emphasis>&arch-title;</emphasis> architecture. If you are looking for information on any of the other Debian-supported architectures take a look at the <ulink url=\"http://www.debian.org/ports/\">Debian-Ports</ulink> pages." -msgstr "E dokumentum leírja a Debian <emphasis>&arch-title;</emphasis> architektúrára telepítését. Ha más, Debian által támogatott architektúra érdekel, nézd meg a <ulink url=\"http://www.debian.org/ports/\">Debian portok</ulink> oldalt." +msgid "" +"This document covers installation for the <emphasis>&arch-title;</emphasis> " +"architecture. If you are looking for information on any of the other Debian-" +"supported architectures take a look at the <ulink url=\"http://www.debian." +"org/ports/\">Debian-Ports</ulink> pages." +msgstr "" +"E dokumentum leírja a Debian <emphasis>&arch-title;</emphasis> " +"architektúrára telepítését. Ha más, Debian által támogatott architektúra " +"érdekel, nézd meg a <ulink url=\"http://www.debian.org/ports/\">Debian " +"portok</ulink> oldalt." #. Tag: para #: hardware.xml:209 #, no-c-format -msgid "This is the first official release of &debian; for the &arch-title; architecture. We feel that it has proven itself sufficiently to be released. However, because it has not had the exposure (and hence testing by users) that some other architectures have had, you may encounter a few bugs. Use our <ulink url=\"&url-bts;\">Bug Tracking System</ulink> to report any problems; make sure to mention the fact that the bug is on the &arch-title; platform. It can be necessary to use the <ulink url=\"&url-list-subscribe;\">debian-&arch-listname; mailing list</ulink> as well." -msgstr "Az a &debian; 1. hivatalos &arch-title; kiadása. Tapasztalataink szerint megérett a kiadásra. De mivel még kevesebb felhasználó tesztelte, ezért nagyobb az esély, hogy találsz benne hibát. Kérjük, a <ulink url=\"&url-bts;\">Hibakövető rendszer</ulink> segítségével jelents minden hibát; említsd meg, hogy a hibát &arch-title; platformon lelted. Ilyenkor az architektúrának megfelelő <ulink url=\"&url-list-subscribe;\">debian-&arch-listname; lista</ulink> használata is szükséges lehet." +msgid "" +"This is the first official release of &debian; for the &arch-title; " +"architecture. We feel that it has proven itself sufficiently to be released. " +"However, because it has not had the exposure (and hence testing by users) " +"that some other architectures have had, you may encounter a few bugs. Use " +"our <ulink url=\"&url-bts;\">Bug Tracking System</ulink> to report any " +"problems; make sure to mention the fact that the bug is on the &arch-title; " +"platform. It can be necessary to use the <ulink url=\"&url-list-subscribe;" +"\">debian-&arch-listname; mailing list</ulink> as well." +msgstr "" +"Az a &debian; 1. hivatalos &arch-title; kiadása. Tapasztalataink szerint " +"megérett a kiadásra. De mivel még kevesebb felhasználó tesztelte, ezért " +"nagyobb az esély, hogy találsz benne hibát. Kérjük, a <ulink url=\"&url-bts;" +"\">Hibakövető rendszer</ulink> segítségével jelents minden hibát; említsd " +"meg, hogy a hibát &arch-title; platformon lelted. Ilyenkor az " +"architektúrának megfelelő <ulink url=\"&url-list-subscribe;\">debian-&arch-" +"listname; lista</ulink> használata is szükséges lehet." #. Tag: title -#: hardware.xml:231 -#: hardware.xml:690 -#: hardware.xml:726 -#: hardware.xml:802 -#: hardware.xml:821 -#: hardware.xml:907 -#: hardware.xml:949 -#: hardware.xml:1017 -#: hardware.xml:1176 -#: hardware.xml:1622 +#: hardware.xml:231 hardware.xml:690 hardware.xml:726 hardware.xml:802 +#: hardware.xml:821 hardware.xml:907 hardware.xml:949 hardware.xml:1017 +#: hardware.xml:1176 hardware.xml:1622 #, no-c-format msgid "CPU, Main Boards, and Video Support" msgstr "CPU, alaplap és videó támogatás" @@ -549,20 +584,42 @@ msgstr "CPU, alaplap és videó támogatás" #. Tag: para #: hardware.xml:232 #, no-c-format -msgid "Complete information regarding supported DEC Alphas can be found at <ulink url=\"&url-alpha-howto;\">Linux Alpha HOWTO</ulink>. The purpose of this section is to describe the systems supported by the boot disks." -msgstr "A támogatott DEC Alpha gépekkel kapcsolatos adatok a <ulink url=\"&url-alpha-howto;\">Linux Alpha HOGYAN</ulink> címen találhatók. E szakasz célja az indító lemezek által támogatott rendszerek leírása." +msgid "" +"Complete information regarding supported DEC Alphas can be found at <ulink " +"url=\"&url-alpha-howto;\">Linux Alpha HOWTO</ulink>. The purpose of this " +"section is to describe the systems supported by the boot disks." +msgstr "" +"A támogatott DEC Alpha gépekkel kapcsolatos adatok a <ulink url=\"&url-alpha-" +"howto;\">Linux Alpha HOGYAN</ulink> címen találhatók. E szakasz célja az " +"indító lemezek által támogatott rendszerek leírása." #. Tag: para #: hardware.xml:239 #, no-c-format -msgid "Alpha machines are subdivided into different system types because there are a number of generations of motherboard and supporting chipsets. Different systems (<quote>sub-architectures</quote>) often have radically different engineering and capabilities. Therefore, the process of installing and, more to the point, booting, can vary from system to system." -msgstr "Az Alpha gépek 2 eltérő rendszer-típusra oszlanak, mert számos generációt éltek meg. Ezek az alrendszerek (<quote>al-architektúrák</quote>) teljesen eltérő felépítéssel és képességekkel rendelkeznek. Ezért a telepítés, és főleg az indítás rendszerről rendszerre eltér." +msgid "" +"Alpha machines are subdivided into different system types because there are " +"a number of generations of motherboard and supporting chipsets. Different " +"systems (<quote>sub-architectures</quote>) often have radically different " +"engineering and capabilities. Therefore, the process of installing and, more " +"to the point, booting, can vary from system to system." +msgstr "" +"Az Alpha gépek 2 eltérő rendszer-típusra oszlanak, mert számos generációt " +"éltek meg. Ezek az alrendszerek (<quote>al-architektúrák</quote>) teljesen " +"eltérő felépítéssel és képességekkel rendelkeznek. Ezért a telepítés, és " +"főleg az indítás rendszerről rendszerre eltér." #. Tag: para #: hardware.xml:247 #, no-c-format -msgid "The following table lists the system types supported by the Debian installation system. The table also indicates the <emphasis>code name</emphasis> for these system types. You'll need to know this code name when you actually begin the installation process:" -msgstr "Az alábbi táblázat adja a Debian telepítő rendszer által támogatott rendszereket. A táblázat e rendszerek <emphasis>kódnevét</emphasis> is mutatja. A telepítés megkezdéséhez tudnod kell majd ezt:" +msgid "" +"The following table lists the system types supported by the Debian " +"installation system. The table also indicates the <emphasis>code name</" +"emphasis> for these system types. You'll need to know this code name when " +"you actually begin the installation process:" +msgstr "" +"Az alábbi táblázat adja a Debian telepítő rendszer által támogatott " +"rendszereket. A táblázat e rendszerek <emphasis>kódnevét</emphasis> is " +"mutatja. A telepítés megkezdéséhez tudnod kell majd ezt:" #. Tag: entry #: hardware.xml:264 @@ -601,9 +658,7 @@ msgid "Maverick" msgstr "Maverick" #. Tag: entry -#: hardware.xml:274 -#: hardware.xml:278 -#: hardware.xml:282 +#: hardware.xml:274 hardware.xml:278 hardware.xml:282 #, no-c-format msgid "alcor" msgstr "alcor" @@ -693,14 +748,8 @@ msgid "Mustang" msgstr "Mustang" #. Tag: entry -#: hardware.xml:300 -#: hardware.xml:304 -#: hardware.xml:308 -#: hardware.xml:312 -#: hardware.xml:316 -#: hardware.xml:320 -#: hardware.xml:324 -#: hardware.xml:328 +#: hardware.xml:300 hardware.xml:304 hardware.xml:308 hardware.xml:312 +#: hardware.xml:316 hardware.xml:320 hardware.xml:324 hardware.xml:328 #, no-c-format msgid "avanti" msgstr "avanti" @@ -790,9 +839,7 @@ msgid "Avanti" msgstr "Avanti" #. Tag: entry -#: hardware.xml:332 -#: hardware.xml:345 -#: hardware.xml:346 +#: hardware.xml:332 hardware.xml:345 hardware.xml:346 #, no-c-format msgid "EB164" msgstr "EB164" @@ -858,9 +905,7 @@ msgid "eb164" msgstr "eb164" #. Tag: entry -#: hardware.xml:351 -#: hardware.xml:360 -#: hardware.xml:361 +#: hardware.xml:351 hardware.xml:360 hardware.xml:361 #, no-c-format msgid "EB64+" msgstr "EB64+" @@ -872,15 +917,13 @@ msgid "AlphaPC64" msgstr "AlphaPC64" #. Tag: entry -#: hardware.xml:353 -#: hardware.xml:357 +#: hardware.xml:353 hardware.xml:357 #, no-c-format msgid "Cabriolet" msgstr "Cabriolet" #. Tag: entry -#: hardware.xml:354 -#: hardware.xml:358 +#: hardware.xml:354 hardware.xml:358 #, no-c-format msgid "cabriolet" msgstr "cabriolet" @@ -898,9 +941,7 @@ msgid "eb64p" msgstr "eb64p" #. Tag: entry -#: hardware.xml:366 -#: hardware.xml:367 -#: hardware.xml:368 +#: hardware.xml:366 hardware.xml:367 hardware.xml:368 #, no-c-format msgid "EB66" msgstr "EB66" @@ -912,8 +953,7 @@ msgid "eb66" msgstr "eb66" #. Tag: entry -#: hardware.xml:371 -#: hardware.xml:372 +#: hardware.xml:371 hardware.xml:372 #, no-c-format msgid "EB66+" msgstr "EB66+" @@ -937,53 +977,22 @@ msgid "DEC 2000 Model 300(S)" msgstr "DEC 2000 Model 300(S)" #. Tag: entry -#: hardware.xml:379 -#: hardware.xml:387 +#: hardware.xml:379 hardware.xml:387 #, no-c-format msgid "Jensen" msgstr "Jensen" #. Tag: entry -#: hardware.xml:380 -#: hardware.xml:384 -#: hardware.xml:388 -#: hardware.xml:449 -#: hardware.xml:453 -#: hardware.xml:471 -#: hardware.xml:475 -#: hardware.xml:479 -#: hardware.xml:483 -#: hardware.xml:487 -#: hardware.xml:491 -#: hardware.xml:495 -#: hardware.xml:509 -#: hardware.xml:513 -#: hardware.xml:517 -#: hardware.xml:521 -#: hardware.xml:525 -#: hardware.xml:559 -#: hardware.xml:563 -#: hardware.xml:567 -#: hardware.xml:571 -#: hardware.xml:585 -#: hardware.xml:589 -#: hardware.xml:593 -#: hardware.xml:597 -#: hardware.xml:604 -#: hardware.xml:608 -#: hardware.xml:612 -#: hardware.xml:616 -#: hardware.xml:620 -#: hardware.xml:624 -#: hardware.xml:628 -#: hardware.xml:632 -#: hardware.xml:636 -#: hardware.xml:640 -#: hardware.xml:644 -#: hardware.xml:648 -#: hardware.xml:652 -#: hardware.xml:659 -#: hardware.xml:663 +#: hardware.xml:380 hardware.xml:384 hardware.xml:388 hardware.xml:449 +#: hardware.xml:453 hardware.xml:471 hardware.xml:475 hardware.xml:479 +#: hardware.xml:483 hardware.xml:487 hardware.xml:491 hardware.xml:495 +#: hardware.xml:509 hardware.xml:513 hardware.xml:517 hardware.xml:521 +#: hardware.xml:525 hardware.xml:559 hardware.xml:563 hardware.xml:567 +#: hardware.xml:571 hardware.xml:585 hardware.xml:589 hardware.xml:593 +#: hardware.xml:597 hardware.xml:604 hardware.xml:608 hardware.xml:612 +#: hardware.xml:616 hardware.xml:620 hardware.xml:624 hardware.xml:628 +#: hardware.xml:632 hardware.xml:636 hardware.xml:640 hardware.xml:644 +#: hardware.xml:648 hardware.xml:652 hardware.xml:659 hardware.xml:663 #, no-c-format msgid "<entry>N/A</entry>" msgstr "<entry>N/A</entry>" @@ -1019,27 +1028,15 @@ msgid "Personal WorkStation 433a" msgstr "Personal WorkStation 433a" #. Tag: entry -#: hardware.xml:394 -#: hardware.xml:398 -#: hardware.xml:402 -#: hardware.xml:406 -#: hardware.xml:410 -#: hardware.xml:414 -#: hardware.xml:418 -#: hardware.xml:422 +#: hardware.xml:394 hardware.xml:398 hardware.xml:402 hardware.xml:406 +#: hardware.xml:410 hardware.xml:414 hardware.xml:418 hardware.xml:422 #, no-c-format msgid "Miata" msgstr "Miata" #. Tag: entry -#: hardware.xml:395 -#: hardware.xml:399 -#: hardware.xml:403 -#: hardware.xml:407 -#: hardware.xml:411 -#: hardware.xml:415 -#: hardware.xml:419 -#: hardware.xml:423 +#: hardware.xml:395 hardware.xml:399 hardware.xml:403 hardware.xml:407 +#: hardware.xml:411 hardware.xml:415 hardware.xml:419 hardware.xml:423 #, no-c-format msgid "miata" msgstr "miata" @@ -1105,10 +1102,7 @@ msgid "Mikasa" msgstr "Mikasa" #. Tag: entry -#: hardware.xml:430 -#: hardware.xml:434 -#: hardware.xml:438 -#: hardware.xml:442 +#: hardware.xml:430 hardware.xml:434 hardware.xml:438 hardware.xml:442 #, no-c-format msgid "mikasa" msgstr "mikasa" @@ -1126,8 +1120,7 @@ msgid "Mikasa+" msgstr "Mikasa+" #. Tag: entry -#: hardware.xml:436 -#: hardware.xml:440 +#: hardware.xml:436 hardware.xml:440 #, no-c-format msgid "AlphaServer 1000 5/300" msgstr "AlphaServer 1000 5/300" @@ -1193,8 +1186,7 @@ msgid "Noname" msgstr "Névtelen" #. Tag: entry -#: hardware.xml:460 -#: hardware.xml:464 +#: hardware.xml:460 hardware.xml:464 #, no-c-format msgid "noname" msgstr "névtelen" @@ -1260,9 +1252,7 @@ msgid "AlphaServer 800 5/333...500" msgstr "AlphaServer 800 5/333...500" #. Tag: entry -#: hardware.xml:482 -#: hardware.xml:490 -#: hardware.xml:494 +#: hardware.xml:482 hardware.xml:490 hardware.xml:494 #, no-c-format msgid "Corelle" msgstr "Corelle" @@ -1298,8 +1288,7 @@ msgid "PLATFORM 2000" msgstr "PLATFORM 2000" #. Tag: entry -#: hardware.xml:500 -#: hardware.xml:501 +#: hardware.xml:500 hardware.xml:501 #, no-c-format msgid "<entry>P2K</entry>" msgstr "<entry>P2K</entry>" @@ -1323,8 +1312,7 @@ msgid "AlphaServer 1200 5/xxx" msgstr "AlphaServer 1200 5/xxx" #. Tag: entry -#: hardware.xml:508 -#: hardware.xml:520 +#: hardware.xml:508 hardware.xml:520 #, no-c-format msgid "Tincup/DaVinci" msgstr "Tincup/DaVinci" @@ -1348,8 +1336,7 @@ msgid "AlphaServer 4100 5/xxx" msgstr "AlphaServer 4100 5/xxx" #. Tag: entry -#: hardware.xml:516 -#: hardware.xml:524 +#: hardware.xml:516 hardware.xml:524 #, no-c-format msgid "Dodge" msgstr "Dodge" @@ -1379,23 +1366,15 @@ msgid "DeskStation AlphaPC164-UX" msgstr "DeskStation AlphaPC164-UX" #. Tag: entry -#: hardware.xml:531 -#: hardware.xml:535 -#: hardware.xml:539 -#: hardware.xml:543 -#: hardware.xml:547 -#: hardware.xml:551 +#: hardware.xml:531 hardware.xml:535 hardware.xml:539 hardware.xml:543 +#: hardware.xml:547 hardware.xml:551 #, no-c-format msgid "Ruffian" msgstr "Ruffian" #. Tag: entry -#: hardware.xml:532 -#: hardware.xml:536 -#: hardware.xml:540 -#: hardware.xml:544 -#: hardware.xml:548 -#: hardware.xml:552 +#: hardware.xml:532 hardware.xml:536 hardware.xml:540 hardware.xml:544 +#: hardware.xml:548 hardware.xml:552 #, no-c-format msgid "ruffian" msgstr "ruffian" @@ -1551,9 +1530,7 @@ msgid "Privateer" msgstr "Privateer" #. Tag: entry -#: hardware.xml:595 -#: hardware.xml:634 -#: hardware.xml:638 +#: hardware.xml:595 hardware.xml:634 hardware.xml:638 #, no-c-format msgid "UNKNOWN" msgstr "ISMERETLEN" @@ -1577,8 +1554,7 @@ msgid "AlphaServer DS10" msgstr "AlphaServer DS10" #. Tag: entry -#: hardware.xml:603 -#: hardware.xml:651 +#: hardware.xml:603 hardware.xml:651 #, no-c-format msgid "Webbrick" msgstr "Webbrick" @@ -1644,8 +1620,7 @@ msgid "Clipper" msgstr "Clipper" #. Tag: entry -#: hardware.xml:626 -#: hardware.xml:627 +#: hardware.xml:626 hardware.xml:627 #, no-c-format msgid "DP264" msgstr "DP264" @@ -1717,8 +1692,7 @@ msgid "AlphaServer GS160" msgstr "AlphaServer GS160" #. Tag: entry -#: hardware.xml:658 -#: hardware.xml:662 +#: hardware.xml:658 hardware.xml:662 #, no-c-format msgid "Wildfire" msgstr "Wildfire" @@ -1730,8 +1704,7 @@ msgid "AlphaServer GS320" msgstr "AlphaServer GS320" #. Tag: entry -#: hardware.xml:667 -#: hardware.xml:669 +#: hardware.xml:667 hardware.xml:669 #, no-c-format msgid "<entry>XL</entry>" msgstr "<entry>XL</entry>" @@ -1751,20 +1724,27 @@ msgstr "<entry>xl</entry>" #. Tag: para #: hardware.xml:675 #, no-c-format -msgid "It is believed that Debian &releasename; supports installing on all alpha sub-architectures with the exception of the ARC-only Ruffian and XL sub-architectures and the Titan subarchitecture, which requires a change to the kernel compile options." +msgid "" +"It is believed that Debian &releasename; supports installing on all alpha " +"sub-architectures with the exception of the ARC-only Ruffian and XL sub-" +"architectures and the Titan subarchitecture, which requires a change to the " +"kernel compile options." msgstr "" #. Tag: para -#: hardware.xml:691 -#: hardware.xml:822 +#: hardware.xml:691 hardware.xml:822 #, no-c-format -msgid "Complete information concerning supported peripherals can be found at <ulink url=\"&url-hardware-howto;\">Linux Hardware Compatibility HOWTO</ulink>. This section merely outlines the basics." -msgstr "A <ulink url=\"&url-hardware-howto;\">Linux Hardver Kompatibilitás HOGYAN</ulink> leírásban megtalálható a támogatott perifériák listája. Ez a fejezet csak az alapokat emeli ki." +msgid "" +"Complete information concerning supported peripherals can be found at <ulink " +"url=\"&url-hardware-howto;\">Linux Hardware Compatibility HOWTO</ulink>. " +"This section merely outlines the basics." +msgstr "" +"A <ulink url=\"&url-hardware-howto;\">Linux Hardver Kompatibilitás HOGYAN</" +"ulink> leírásban megtalálható a támogatott perifériák listája. Ez a fejezet " +"csak az alapokat emeli ki." #. Tag: title -#: hardware.xml:699 -#: hardware.xml:830 -#: hardware.xml:990 +#: hardware.xml:699 hardware.xml:830 hardware.xml:990 #, no-c-format msgid "<title>CPU</title>" msgstr "<title>CPU</title>" @@ -1778,13 +1758,20 @@ msgstr "Az AMD64 és Intel EM64t processzorok is támogatottak." #. Tag: para #: hardware.xml:728 #, no-c-format -msgid "Each distinct ARM architecture requires its own kernel. Because of this the standard Debian distribution only supports installation on a number of the most common systems. The Debian userland however may be used by <emphasis>any</emphasis> ARM CPU including xscale." +msgid "" +"Each distinct ARM architecture requires its own kernel. Because of this the " +"standard Debian distribution only supports installation on a number of the " +"most common systems. The Debian userland however may be used by " +"<emphasis>any</emphasis> ARM CPU including xscale." msgstr "" #. Tag: para #: hardware.xml:736 #, no-c-format -msgid "Most ARM CPUs may be run in either endian mode (big or little). However, the majority of current system implementation uses little-endian mode. Debian currently only supports little-endian ARM systems." +msgid "" +"Most ARM CPUs may be run in either endian mode (big or little). However, the " +"majority of current system implementation uses little-endian mode. Debian " +"currently only supports little-endian ARM systems." msgstr "" #. Tag: para @@ -1802,8 +1789,17 @@ msgstr "Netwinder" #. Tag: para #: hardware.xml:752 #, no-c-format -msgid "This is actually the name for the group of machines based upon the StrongARM 110 CPU and Intel 21285 Northbridge (also known as Footbridge). It comprises of machines like: Netwinder (possibly one of the most common ARM boxes), CATS (also known as the EB110ATX), EBSA 285 and Compaq personal server (cps, aka skiff)." -msgstr "Ez a StrongARM 110 CPU és az Intel 21285 Northbridge (vagy Footbridge) hardverekre épülő gépek neve. Többek között: Netwinder (az egyik legelterjedtebb ARM gép), CATS (vagy EB110ATX), EBSA 285 és Compaq personal server (cps más néven skiff)." +msgid "" +"This is actually the name for the group of machines based upon the StrongARM " +"110 CPU and Intel 21285 Northbridge (also known as Footbridge). It comprises " +"of machines like: Netwinder (possibly one of the most common ARM boxes), " +"CATS (also known as the EB110ATX), EBSA 285 and Compaq personal server (cps, " +"aka skiff)." +msgstr "" +"Ez a StrongARM 110 CPU és az Intel 21285 Northbridge (vagy Footbridge) " +"hardverekre épülő gépek neve. Többek között: Netwinder (az egyik " +"legelterjedtebb ARM gép), CATS (vagy EB110ATX), EBSA 285 és Compaq personal " +"server (cps más néven skiff)." #. Tag: term #: hardware.xml:765 @@ -1814,7 +1810,11 @@ msgstr "NSLU2" #. Tag: para #: hardware.xml:766 #, no-c-format -msgid "The Linksys NSLU2 (Network Storage Link for USB 2.0 Disk Drives) is a small device which allows you to easily provide storage via the network. It comes with an Ethernet connection and two USB ports to which hard drives can be connected." +msgid "" +"The Linksys NSLU2 (Network Storage Link for USB 2.0 Disk Drives) is a small " +"device which allows you to easily provide storage via the network. It comes " +"with an Ethernet connection and two USB ports to which hard drives can be " +"connected." msgstr "" #. Tag: term @@ -1826,32 +1826,100 @@ msgstr "<term>RiscPC</term>" #. Tag: para #: hardware.xml:778 #, no-c-format -msgid "This machine is the oldest supported hardware: it was released in 1994. It has RISC OS in ROM, Linux can be booted from that OS using linloader. The RiscPC has a modular CPU card and typically has a 30MHz 610, 40MHz 710 or 233MHz Strongarm 110 CPU fitted. The mainboard has integrated IDE, SVGA video, parallel port, single serial port, PS/2 keyboard and proprietary mouse port. The proprietary module expansion bus allows for up to eight expansion cards to be fitted depending on configuration, several of these modules have Linux drivers." -msgstr "Ez a gép a legrégebben támogatott hardver: a megjelenés éve: 1994. A ROM tartalma egy RISC OS, a Linux ebből indítható a linloader programmal. A RiscPC lelke egy moduláris CPU kártya, melyen jellemzően egy 30MHz 610, 40MHz 710 vagy 233MHz Strongarm 110 CPU van. Az alaplapon IDE, SVGA, párhuzamos és 1 soros port, PS/2 billentyű és egy egyéni egér port. Az egyéni modul bővítő busz a kiépítéstől függően legfeljebb 8 különféle bővítő kártyát tesz lehetővé, egyesek mennek Linuxszal." +msgid "" +"This machine is the oldest supported hardware: it was released in 1994. It " +"has RISC OS in ROM, Linux can be booted from that OS using linloader. The " +"RiscPC has a modular CPU card and typically has a 30MHz 610, 40MHz 710 or " +"233MHz Strongarm 110 CPU fitted. The mainboard has integrated IDE, SVGA " +"video, parallel port, single serial port, PS/2 keyboard and proprietary " +"mouse port. The proprietary module expansion bus allows for up to eight " +"expansion cards to be fitted depending on configuration, several of these " +"modules have Linux drivers." +msgstr "" +"Ez a gép a legrégebben támogatott hardver: a megjelenés éve: 1994. A ROM " +"tartalma egy RISC OS, a Linux ebből indítható a linloader programmal. A " +"RiscPC lelke egy moduláris CPU kártya, melyen jellemzően egy 30MHz 610, " +"40MHz 710 vagy 233MHz Strongarm 110 CPU van. Az alaplapon IDE, SVGA, " +"párhuzamos és 1 soros port, PS/2 billentyű és egy egyéni egér port. Az " +"egyéni modul bővítő busz a kiépítéstől függően legfeljebb 8 különféle bővítő " +"kártyát tesz lehetővé, egyesek mennek Linuxszal." #. Tag: para #: hardware.xml:803 #, no-c-format -msgid "The are two major support <emphasis>&architecture;</emphasis> flavors: PA-RISC 1.1 and PA-RISC 2.0. The PA-RISC 1.1 architecture is targeted at 32-bit processors whereas the 2.0 architecture is targeted to the 64-bit processors. Some systems are able to run either kernel. In both cases, the userland is 32-bit. There is the possibility of a 64-bit userland in the future." +msgid "" +"There are two major support <emphasis>&architecture;</emphasis> flavors: PA-" +"RISC 1.1 and PA-RISC 2.0. The PA-RISC 1.1 architecture is targeted at 32-bit " +"processors whereas the 2.0 architecture is targeted to the 64-bit " +"processors. Some systems are able to run either kernel. In both cases, the " +"userland is 32-bit. There is the possibility of a 64-bit userland in the " +"future." msgstr "" #. Tag: para #: hardware.xml:831 #, no-c-format -msgid "Nearly all x86-based (IA-32) processors still in use in personal computers are supported, including all varieties of Intel's \"Pentium\" series. This also includes 32-bits AMD and VIA (former Cyrix) processors, and new processors like the Athlon XP and Intel P4 Xeon." -msgstr "Szinte minden, sok személyi számítógépben még ma is használt x86-alapú (IA-32) processzor támogatott, ideértve az Intel néhai \"Pentium\" sorozatát is. Ez a legrégebbi 32-bites AMD és VIA (egykor Cyrix) processzorokat is jelenti és a kevésbé régi Athlon XP és Intel P4 Xeonokat." +msgid "" +"Nearly all x86-based (IA-32) processors still in use in personal computers " +"are supported, including all varieties of Intel's \"Pentium\" series. This " +"also includes 32-bits AMD and VIA (former Cyrix) processors, and new " +"processors like the Athlon XP and Intel P4 Xeon." +msgstr "" +"Szinte minden, sok személyi számítógépben még ma is használt x86-alapú (IA-" +"32) processzor támogatott, ideértve az Intel néhai \"Pentium\" sorozatát is. " +"Ez a legrégebbi 32-bites AMD és VIA (egykor Cyrix) processzorokat is jelenti " +"és a kevésbé régi Athlon XP és Intel P4 Xeonokat." #. Tag: para #: hardware.xml:839 #, no-c-format -msgid "If your system has a 64-bits AMD64, Intel EM64t or Intel Core 2 Duo processor, you will probably want to use the installer for the amd64 architecture instead of the installer for the (32-bits) i386 architecture." -msgstr "Ha a rendszeredben egy 64-bites AMD64, Intel EM64t vagy Intel Core 2 Duo processzor van, akkor valószínűleg már az amd64 architektúrát akarod használni a (32-bites) i386 architektúra telepítője helyett." +msgid "" +"If your system has a 64-bits AMD64, Intel EM64t or Intel Core 2 Duo " +"processor, you will probably want to use the installer for the amd64 " +"architecture instead of the installer for the (32-bits) i386 architecture." +msgstr "" +"Ha a rendszeredben egy 64-bites AMD64, Intel EM64t vagy Intel Core 2 Duo " +"processzor van, akkor valószínűleg már az amd64 architektúrát akarod " +"használni a (32-bites) i386 architektúra telepítője helyett." #. Tag: para #: hardware.xml:846 #, no-c-format -msgid "However, Debian GNU/Linux &releasename; will <emphasis>not</emphasis> run on 386 or earlier processors. Despite the architecture name \"i386\", Debian Sarge has <emphasis>dropped support</emphasis> for actual 80386 processors (and their clones), which were supported by earlier releases<footnote> <para> We have long tried to avoid this, but in the end it was necessary due a unfortunate series of issues with the compiler and the kernel, starting with an bug in the C++ ABI provided by GCC. You should still be able to run Debian GNU/Linux on actual 80386 processors if you compile your own kernel and compile all packages from source, but that is beyond the scope of this manual. </para> </footnote>. (No version of Linux has ever supported the 286 or earlier chips in the series.) All i486 and later processors are still supported<footnote> <para> Many Debian packages will actually run slightly faster on modern computers as a positive side effect of dropping support for these old chips. The i486, introduced in 1989, has three opcodes (bswap, cmpxchg, and xadd) which the i386, introduced in 1986, did not have. Previously, these could not be easily used by most Debian packages; now they can. </para> </footnote>." -msgstr "Tudni kell, hogy a Debian GNU/Linux &releasename; immár <emphasis>nem</emphasis> fut 386-os vagy korábbi processzoron. Az \"i386\" architektúra-név ellenére a Debian Sarge óta <emphasis>megszűnt a támogatás</emphasis> a 80386 processzorokhoz (és másolataikhoz), melyet a korábbi kiadások támogattak<footnote> <para> Sokáig megpróbáltuk elkerülni ezt, de végül a fordító és a kernel hibáinak egy szerencsétlen sora miatt, amely egy a GCC által szállított C++ ABI hibával kezdődött ez szükséges volt. A Debian GNU/Linux még mindig futtatható 80386-os processzoron, de ehhez magadnak kell lefordítanod a kernelt és az összes használt csomagot, és ez túlmutat e kézikönyv célján. </para> </footnote>. (A Linux nem támogatja a 286-os vagy korábbi x86 processzorokat.) Minden i486 és későbbi processzor támogatott<footnote> <para> A modern gépeken sok Debian csomag így érezhetően gyorsabban fut, ami a régi gépek támogatása elvetésének pozitív oldala. Az i486 (1989) 3 utasításkóddal bír (bswap, cmpxchg, és xadd) mellyel az i386 (1986) nem. Korábban a legtöbb Debian csomagban ezek nemigen voltak használhatók; most igen. </para> </footnote>." +msgid "" +"However, Debian GNU/Linux &releasename; will <emphasis>not</emphasis> run on " +"386 or earlier processors. Despite the architecture name \"i386\", Debian " +"Sarge has <emphasis>dropped support</emphasis> for actual 80386 processors " +"(and their clones), which were supported by earlier releases<footnote> " +"<para> We have long tried to avoid this, but in the end it was necessary due " +"a unfortunate series of issues with the compiler and the kernel, starting " +"with an bug in the C++ ABI provided by GCC. You should still be able to run " +"Debian GNU/Linux on actual 80386 processors if you compile your own kernel " +"and compile all packages from source, but that is beyond the scope of this " +"manual. </para> </footnote>. (No version of Linux has ever supported the 286 " +"or earlier chips in the series.) All i486 and later processors are still " +"supported<footnote> <para> Many Debian packages will actually run slightly " +"faster on modern computers as a positive side effect of dropping support for " +"these old chips. The i486, introduced in 1989, has three opcodes (bswap, " +"cmpxchg, and xadd) which the i386, introduced in 1986, did not have. " +"Previously, these could not be easily used by most Debian packages; now they " +"can. </para> </footnote>." +msgstr "" +"Tudni kell, hogy a Debian GNU/Linux &releasename; immár <emphasis>nem</" +"emphasis> fut 386-os vagy korábbi processzoron. Az \"i386\" architektúra-név " +"ellenére a Debian Sarge óta <emphasis>megszűnt a támogatás</emphasis> a " +"80386 processzorokhoz (és másolataikhoz), melyet a korábbi kiadások " +"támogattak<footnote> <para> Sokáig megpróbáltuk elkerülni ezt, de végül a " +"fordító és a kernel hibáinak egy szerencsétlen sora miatt, amely egy a GCC " +"által szállított C++ ABI hibával kezdődött ez szükséges volt. A Debian GNU/" +"Linux még mindig futtatható 80386-os processzoron, de ehhez magadnak kell " +"lefordítanod a kernelt és az összes használt csomagot, és ez túlmutat e " +"kézikönyv célján. </para> </footnote>. (A Linux nem támogatja a 286-os vagy " +"korábbi x86 processzorokat.) Minden i486 és későbbi processzor " +"támogatott<footnote> <para> A modern gépeken sok Debian csomag így " +"érezhetően gyorsabban fut, ami a régi gépek támogatása elvetésének pozitív " +"oldala. Az i486 (1989) 3 utasításkóddal bír (bswap, cmpxchg, és xadd) " +"mellyel az i386 (1986) nem. Korábban a legtöbb Debian csomagban ezek nemigen " +"voltak használhatók; most igen. </para> </footnote>." #. Tag: title #: hardware.xml:883 @@ -1862,49 +1930,126 @@ msgstr "I/O Busz" #. Tag: para #: hardware.xml:884 #, no-c-format -msgid "The system bus is the part of the motherboard which allows the CPU to communicate with peripherals such as storage devices. Your computer must use the ISA, EISA, PCI, the Microchannel Architecture (MCA, used in IBM's PS/2 line), or VESA Local Bus (VLB, sometimes called the VL bus). Essentially all personal computers sold in recent years use one of these." -msgstr "A rendszerbusz az alaplap része, mellyel a CPU a perifériákkal kommunikál, például a tároló eszközökkel. A gépnek ISA-t, EISA-t, PCI-t, Mikrocsatornás architektúrát (MCA, az IBM PS/2 vonalban használt) vagy VESA Local Bus-t (VLB, néha VL busznak hívják) kell használnia. Gyakorlatilag minden mai személyi számítógép ezek egyikét használja." +msgid "" +"The system bus is the part of the motherboard which allows the CPU to " +"communicate with peripherals such as storage devices. Your computer must use " +"the ISA, EISA, PCI, the Microchannel Architecture (MCA, used in IBM's PS/2 " +"line), or VESA Local Bus (VLB, sometimes called the VL bus). Essentially all " +"personal computers sold in recent years use one of these." +msgstr "" +"A rendszerbusz az alaplap része, mellyel a CPU a perifériákkal kommunikál, " +"például a tároló eszközökkel. A gépnek ISA-t, EISA-t, PCI-t, Mikrocsatornás " +"architektúrát (MCA, az IBM PS/2 vonalban használt) vagy VESA Local Bus-t " +"(VLB, néha VL busznak hívják) kell használnia. Gyakorlatilag minden mai " +"személyi számítógép ezek egyikét használja." #. Tag: para #: hardware.xml:908 #, no-c-format -msgid "Complete information concerning supported M68000 based (<emphasis>&architecture;</emphasis>) systems can be found at the <ulink url=\"&url-m68k-faq;\">Linux/m68k FAQ</ulink>. This section merely outlines the basics." -msgstr "Az M68000 alapú (<emphasis>&architecture;</emphasis>) támogatott rendszerekről szóló teljes leírás a <ulink url=\"&url-m68k-faq;\">Linux/m68k FAQ</ulink> címen található. E szakasz csak az alapokat írja le." +msgid "" +"Complete information concerning supported M68000 based " +"(<emphasis>&architecture;</emphasis>) systems can be found at the <ulink url=" +"\"&url-m68k-faq;\">Linux/m68k FAQ</ulink>. This section merely outlines the " +"basics." +msgstr "" +"Az M68000 alapú (<emphasis>&architecture;</emphasis>) támogatott " +"rendszerekről szóló teljes leírás a <ulink url=\"&url-m68k-faq;\">Linux/m68k " +"FAQ</ulink> címen található. E szakasz csak az alapokat írja le." #. Tag: para #: hardware.xml:915 #, no-c-format -msgid "The &architecture; port of Linux runs on any 680x0 with a PMMU (Paged Memory Management Unit) and a FPU (floating-point unit). This includes the 68020 with an external 68851 PMMU, the 68030, and better, and excludes the <quote>EC</quote> line of 680x0 processors. See the <ulink url=\"&url-m68k-faq;\">Linux/m68k FAQ</ulink> for complete details." -msgstr "A Linux &architecture; portja minden PMMU (Paged Memory Management Unit) és FPU (floating-point unit) összetevővel rendelkező 680x0 processzoron fut. Ezek: a 68020 és külső 68851 PMMU és a 68030 és újabbak, ezzel szemben nem megfelelőek a 680x0 <quote>EC</quote> generációjú processzorok." +msgid "" +"The &architecture; port of Linux runs on any 680x0 with a PMMU (Paged Memory " +"Management Unit) and a FPU (floating-point unit). This includes the 68020 " +"with an external 68851 PMMU, the 68030, and better, and excludes the " +"<quote>EC</quote> line of 680x0 processors. See the <ulink url=\"&url-m68k-" +"faq;\">Linux/m68k FAQ</ulink> for complete details." +msgstr "" +"A Linux &architecture; portja minden PMMU (Paged Memory Management Unit) és " +"FPU (floating-point unit) összetevővel rendelkező 680x0 processzoron fut. " +"Ezek: a 68020 és külső 68851 PMMU és a 68030 és újabbak, ezzel szemben nem " +"megfelelőek a 680x0 <quote>EC</quote> generációjú processzorok." #. Tag: para #: hardware.xml:923 #, no-c-format -msgid "There are four major supported <emphasis>&architecture;</emphasis> flavors: Amiga, Atari, Macintosh and VME machines. Amiga and Atari were the first two systems to which Linux was ported; in keeping, they are also the two most well-supported Debian ports. The Macintosh line is supported incompletely, both by Debian and by the Linux kernel; see <ulink url=\"&url-m68k-mac;\">Linux m68k for Macintosh</ulink> for project status and supported hardware. The BVM and Motorola single board VMEbus computers are the most recent addition to the list of machines supported by Debian. Ports to other &architecture; architectures, such as the Sun3 architecture and NeXT black box, are underway but not yet supported by Debian." +msgid "" +"There are four major supported <emphasis>&architecture;</emphasis> flavors: " +"Amiga, Atari, Macintosh and VME machines. Amiga and Atari were the first two " +"systems to which Linux was ported; in keeping, they are also the two most " +"well-supported Debian ports. The Macintosh line is supported incompletely, " +"both by Debian and by the Linux kernel; see <ulink url=\"&url-m68k-mac;" +"\">Linux m68k for Macintosh</ulink> for project status and supported " +"hardware. The BVM and Motorola single board VMEbus computers are the most " +"recent addition to the list of machines supported by Debian. Ports to other " +"&architecture; architectures, such as the Sun3 architecture and NeXT black " +"box, are underway but not yet supported by Debian." msgstr "" #. Tag: para #: hardware.xml:950 #, no-c-format -msgid "Debian on &arch-title; supports the following platforms: <itemizedlist> <listitem><para> SGI IP22: this platform includes the SGI machines Indy, Indigo 2 and Challenge S. Since these machines are very similar, whenever this document refers to the SGI Indy, the Indigo 2 and Challenge S are meant as well. </para></listitem> <listitem><para> SGI IP32: this platform is generally known as SGI O2. </para></listitem> <listitem><para> Broadcom BCM91250A (SWARM): this is an ATX form factor evaluation board from Broadcom based on the dual-core SB1 1250 CPU. </para></listitem> <listitem><para> Broadcom BCM91480B (BigSur): this is an ATX form factor evaluation board from Broadcom based on the quad-core SB1A 1480 CPU. </para></listitem> </itemizedlist> Complete information regarding supported mips/mipsel machines can be found at the <ulink url=\"&url-linux-mips;\">Linux-MIPS homepage</ulink>. In the following, only the systems supported by the Debian installer will be covered. If you are looking for support for other subarchitectures, please contact the <ulink url=\"&url-list-subscribe;\"> debian-&arch-listname; mailing list</ulink>." +msgid "" +"Debian on &arch-title; supports the following platforms: <itemizedlist> " +"<listitem><para> SGI IP22: this platform includes the SGI machines Indy, " +"Indigo 2 and Challenge S. Since these machines are very similar, whenever " +"this document refers to the SGI Indy, the Indigo 2 and Challenge S are meant " +"as well. </para></listitem> <listitem><para> SGI IP32: this platform is " +"generally known as SGI O2. </para></listitem> <listitem><para> Broadcom " +"BCM91250A (SWARM): this is an ATX form factor evaluation board from Broadcom " +"based on the dual-core SB1 1250 CPU. </para></listitem> <listitem><para> " +"Broadcom BCM91480B (BigSur): this is an ATX form factor evaluation board " +"from Broadcom based on the quad-core SB1A 1480 CPU. </para></listitem> </" +"itemizedlist> Complete information regarding supported mips/mipsel machines " +"can be found at the <ulink url=\"&url-linux-mips;\">Linux-MIPS homepage</" +"ulink>. In the following, only the systems supported by the Debian installer " +"will be covered. If you are looking for support for other subarchitectures, " +"please contact the <ulink url=\"&url-list-subscribe;\"> debian-&arch-" +"listname; mailing list</ulink>." msgstr "" #. Tag: para #: hardware.xml:991 #, no-c-format -msgid "On SGI IP22, SGI Indy, Indigo 2 and Challenge S with R4000, R4400, R4600 and R5000 processors are supported by the Debian installation system on big endian MIPS. On SGI IP32, currently only systems based on the R5000 are supported. The Broadcom BCM91250A evaluation board comes with an SB1 1250 chip with two cores which are supported in SMP mode by this installer. Similarly, the BCM91480B evaluation board contains an SB1A 1480 chip with four cores which are supported in SMP mode." +msgid "" +"On SGI IP22, SGI Indy, Indigo 2 and Challenge S with R4000, R4400, R4600 and " +"R5000 processors are supported by the Debian installation system on big " +"endian MIPS. On SGI IP32, currently only systems based on the R5000 are " +"supported. The Broadcom BCM91250A evaluation board comes with an SB1 1250 " +"chip with two cores which are supported in SMP mode by this installer. " +"Similarly, the BCM91480B evaluation board contains an SB1A 1480 chip with " +"four cores which are supported in SMP mode." msgstr "" #. Tag: para #: hardware.xml:1001 #, no-c-format -msgid "Some MIPS machines can be operated in both big and little endian mode. For little endian MIPS, please read the documentation for the mipsel architecture." +msgid "" +"Some MIPS machines can be operated in both big and little endian mode. For " +"little endian MIPS, please read the documentation for the mipsel " +"architecture." msgstr "" #. Tag: para #: hardware.xml:1018 #, no-c-format -msgid "Debian on &arch-title; supports the following platforms: <itemizedlist> <listitem><para> DECstation: various models of the DECstation are supported. </para></listitem> <listitem><para> Cobalt Microserver: only MIPS based Cobalt machines are covered here. This includes the Cobalt Qube 2700 (Qube1), RaQ, Qube2 and RaQ2, and the Gateway Microserver. </para></listitem> <listitem><para> Broadcom BCM91250A (SWARM): this is an ATX form factor evaluation board from Broadcom based on the dual-core SB1 1250 CPU. </para></listitem> <listitem><para> Broadcom BCM91480B (BigSur): this is an ATX form factor evaluation board from Broadcom based on the quad-core SB1A 1480 CPU. </para></listitem> </itemizedlist> Complete information regarding supported mips/mipsel machines can be found at the <ulink url=\"&url-linux-mips;\">Linux-MIPS homepage</ulink>. In the following, only the systems supported by the Debian installer will be covered. If you are looking for support for other subarchitectures, please contact the <ulink url=\"&url-list-subscribe;\"> debian-&arch-listname; mailing list</ulink>." +msgid "" +"Debian on &arch-title; supports the following platforms: <itemizedlist> " +"<listitem><para> DECstation: various models of the DECstation are supported. " +"</para></listitem> <listitem><para> Cobalt Microserver: only MIPS based " +"Cobalt machines are covered here. This includes the Cobalt Qube 2700 " +"(Qube1), RaQ, Qube2 and RaQ2, and the Gateway Microserver. </para></" +"listitem> <listitem><para> Broadcom BCM91250A (SWARM): this is an ATX form " +"factor evaluation board from Broadcom based on the dual-core SB1 1250 CPU. </" +"para></listitem> <listitem><para> Broadcom BCM91480B (BigSur): this is an " +"ATX form factor evaluation board from Broadcom based on the quad-core SB1A " +"1480 CPU. </para></listitem> </itemizedlist> Complete information regarding " +"supported mips/mipsel machines can be found at the <ulink url=\"&url-linux-" +"mips;\">Linux-MIPS homepage</ulink>. In the following, only the systems " +"supported by the Debian installer will be covered. If you are looking for " +"support for other subarchitectures, please contact the <ulink url=\"&url-" +"list-subscribe;\"> debian-&arch-listname; mailing list</ulink>." msgstr "" #. Tag: title @@ -1916,8 +2061,14 @@ msgstr "CPU/Gép típusok" #. Tag: para #: hardware.xml:1060 #, no-c-format -msgid "Currently only DECstations with R3000 and R4000/R4400 CPUs are supported by the Debian installation system on little endian MIPS. The Debian installation system works on the following machines:" -msgstr "A Debian telepítő jelenleg csak az R3000 és R4000/R4400 CPU-s DECstation gépeket támogatja a kis-végű MIPS gépek közül. A Debian telepítő rendszer az alábbi gépeken működik:" +msgid "" +"Currently only DECstations with R3000 and R4000/R4400 CPUs are supported by " +"the Debian installation system on little endian MIPS. The Debian " +"installation system works on the following machines:" +msgstr "" +"A Debian telepítő jelenleg csak az R3000 és R4000/R4400 CPU-s DECstation " +"gépeket támogatja a kis-végű MIPS gépek közül. A Debian telepítő rendszer az " +"alábbi gépeken működik:" #. Tag: entry #: hardware.xml:1072 @@ -1950,17 +2101,13 @@ msgid "DECstation 5000/1xx" msgstr "DECstation 5000/1xx" #. Tag: entry -#: hardware.xml:1080 -#: hardware.xml:1090 -#: hardware.xml:1095 -#: hardware.xml:1105 +#: hardware.xml:1080 hardware.xml:1090 hardware.xml:1095 hardware.xml:1105 #, no-c-format msgid "R3000" msgstr "R3000" #. Tag: entry -#: hardware.xml:1081 -#: hardware.xml:1086 +#: hardware.xml:1081 hardware.xml:1086 #, no-c-format msgid "3MIN" msgstr "3MIN" @@ -1972,8 +2119,7 @@ msgid "DECstation 5000/150" msgstr "DECstation 5000/150" #. Tag: entry -#: hardware.xml:1085 -#: hardware.xml:1110 +#: hardware.xml:1085 hardware.xml:1110 #, no-c-format msgid "R4000" msgstr "R4000" @@ -1997,8 +2143,7 @@ msgid "DECstation 5000/240" msgstr "DECstation 5000/240" #. Tag: entry -#: hardware.xml:1096 -#: hardware.xml:1101 +#: hardware.xml:1096 hardware.xml:1101 #, no-c-format msgid "3MAX+" msgstr "3MAX+" @@ -2022,8 +2167,7 @@ msgid "Personal DECstation 5000/xx" msgstr "Personal DECstation 5000/xx" #. Tag: entry -#: hardware.xml:1106 -#: hardware.xml:1111 +#: hardware.xml:1106 hardware.xml:1111 #, no-c-format msgid "Maxine" msgstr "Maxine" @@ -2037,13 +2181,23 @@ msgstr "Personal DECstation 5000/50" #. Tag: para #: hardware.xml:1116 #, no-c-format -msgid "All Cobalt machines are supported. In the past, only machines with a serial console were supported (that is, all machines except for the Qube 2700, aka Qube1). However, installations are now also possible through SSH." -msgstr "Minden Cobalt gép támogatott. Régen csak a soros konzolos gépek voltak támogatottak (vagyis minden, kivéve a Qube 2700 más nevén Qube1 gépet). De ma már ez is megoldott az SSH lehetőséggel." +msgid "" +"All Cobalt machines are supported. In the past, only machines with a serial " +"console were supported (that is, all machines except for the Qube 2700, aka " +"Qube1). However, installations are now also possible through SSH." +msgstr "" +"Minden Cobalt gép támogatott. Régen csak a soros konzolos gépek voltak " +"támogatottak (vagyis minden, kivéve a Qube 2700 más nevén Qube1 gépet). De " +"ma már ez is megoldott az SSH lehetőséggel." #. Tag: para #: hardware.xml:1123 #, no-c-format -msgid "The Broadcom BCM91250A evaluation board comes with an SB1 1250 chip with two cores which are supported in SMP mode by this installer. Similarly, the BCM91480B evaluation board contains an SB1A 1480 chip with four cores which are supported in SMP mode." +msgid "" +"The Broadcom BCM91250A evaluation board comes with an SB1 1250 chip with two " +"cores which are supported in SMP mode by this installer. Similarly, the " +"BCM91480B evaluation board contains an SB1A 1480 chip with four cores which " +"are supported in SMP mode." msgstr "" #. Tag: title @@ -2055,16 +2209,30 @@ msgstr "" #. Tag: para #: hardware.xml:1134 #, no-c-format -msgid "A serial console is available on all supported DECstations (9600 bps, 8N1). To use the serial console, you have to boot the installer image with the <literal>console=ttyS</literal><replaceable>x</replaceable> kernel parameter (with <replaceable>x</replaceable> being the number of the serial port you have your terminal connected to — usually <literal>2</literal>, but <literal>0</literal> for the Personal DECstations). On 3MIN and 3MAX+ (DECstation 5000/1xx, 5000/240 and 5000/260) a local console is available with the PMAG-BA and the PMAGB-B graphics options." +msgid "" +"A serial console is available on all supported DECstations (9600 bps, 8N1). " +"To use the serial console, you have to boot the installer image with the " +"<literal>console=ttyS</literal><replaceable>x</replaceable> kernel parameter " +"(with <replaceable>x</replaceable> being the number of the serial port you " +"have your terminal connected to — usually <literal>2</literal>, but " +"<literal>0</literal> for the Personal DECstations). On 3MIN and 3MAX+ " +"(DECstation 5000/1xx, 5000/240 and 5000/260) a local console is available " +"with the PMAG-BA and the PMAGB-B graphics options." msgstr "" #. Tag: para #: hardware.xml:1145 #, no-c-format msgid "" -"If you have a Linux system to use as serial terminal, an easy way is to run <command>cu</command><footnote> <para> In Woody this command was part of the <classname>uucp</classname> package, but in later releases it is available as a separate package. </para> </footnote> on it. Example: <informalexample><screen>\n" +"If you have a Linux system to use as serial terminal, an easy way is to run " +"<command>cu</command><footnote> <para> In Woody this command was part of the " +"<classname>uucp</classname> package, but in later releases it is available " +"as a separate package. </para> </footnote> on it. Example: " +"<informalexample><screen>\n" "$ cu -l /dev/ttyS1 -s 9600\n" -"</screen></informalexample> where the option <literal>-l</literal> (line) sets the serial port to use and <literal>-s</literal> (speed) sets the speed for the connection (9600 bits per second)." +"</screen></informalexample> where the option <literal>-l</literal> (line) " +"sets the serial port to use and <literal>-s</literal> (speed) sets the speed " +"for the connection (9600 bits per second)." msgstr "" #. Tag: para @@ -2076,13 +2244,21 @@ msgstr "" #. Tag: para #: hardware.xml:1177 #, no-c-format -msgid "There are four major supported <emphasis>&architecture;</emphasis> subarchitectures: PMac (Power-Macintosh or PowerMac), PReP, APUS (Amiga Power-UP System), and CHRP machines. Each subarchitecture has its own boot methods. In addition, there are four different kernel flavours, supporting different CPU variants." +msgid "" +"There are four major supported <emphasis>&architecture;</emphasis> " +"subarchitectures: PMac (Power-Macintosh or PowerMac), PReP, APUS (Amiga " +"Power-UP System), and CHRP machines. Each subarchitecture has its own boot " +"methods. In addition, there are four different kernel flavours, supporting " +"different CPU variants." msgstr "" #. Tag: para #: hardware.xml:1185 #, no-c-format -msgid "Ports to other <emphasis>&architecture;</emphasis> architectures, such as the Be-Box and MBX architecture, are underway but not yet supported by Debian. We may have a 64-bit port in the future." +msgid "" +"Ports to other <emphasis>&architecture;</emphasis> architectures, such as " +"the Be-Box and MBX architecture, are underway but not yet supported by " +"Debian. We may have a 64-bit port in the future." msgstr "" #. Tag: title @@ -2094,7 +2270,9 @@ msgstr "" #. Tag: para #: hardware.xml:1195 #, no-c-format -msgid "There are four flavours of the powerpc kernel in Debian, based on the CPU type:" +msgid "" +"There are four flavours of the powerpc kernel in Debian, based on the CPU " +"type:" msgstr "" #. Tag: term @@ -2106,7 +2284,10 @@ msgstr "" #. Tag: para #: hardware.xml:1203 #, no-c-format -msgid "Most systems use this kernel flavour, which supports the PowerPC 601, 603, 604, 740, 750, and 7400 processors. All Apple PowerMac machines up to and including the one marketed as G4 use one of these processors." +msgid "" +"Most systems use this kernel flavour, which supports the PowerPC 601, 603, " +"604, 740, 750, and 7400 processors. All Apple PowerMac machines up to and " +"including the one marketed as G4 use one of these processors." msgstr "" #. Tag: term @@ -2124,19 +2305,26 @@ msgstr "" #. Tag: para #: hardware.xml:1218 #, no-c-format -msgid "The POWER3 processor is used in older IBM 64-bit server systems: known models include the IntelliStation POWER Model 265, the pSeries 610 and 640, and the RS/6000 7044-170, 7043-260, and 7044-270." +msgid "" +"The POWER3 processor is used in older IBM 64-bit server systems: known " +"models include the IntelliStation POWER Model 265, the pSeries 610 and 640, " +"and the RS/6000 7044-170, 7043-260, and 7044-270." msgstr "" #. Tag: para #: hardware.xml:1224 #, no-c-format -msgid "The POWER4 processor is used in more recent IBM 64-bit server systems: known models include the pSeries 615, 630, 650, 655, 670, and 690." +msgid "" +"The POWER4 processor is used in more recent IBM 64-bit server systems: known " +"models include the pSeries 615, 630, 650, 655, 670, and 690." msgstr "" #. Tag: para #: hardware.xml:1229 #, no-c-format -msgid "Systems using the Apple G5 (PPC970FX processor) are also based on the POWER4 architecture, and use this kernel flavour." +msgid "" +"Systems using the Apple G5 (PPC970FX processor) are also based on the POWER4 " +"architecture, and use this kernel flavour." msgstr "" #. Tag: term @@ -2160,7 +2348,9 @@ msgstr "" #. Tag: para #: hardware.xml:1248 #, no-c-format -msgid "This kernel flavour supports the Amiga Power-UP System, though it is currently disabled." +msgid "" +"This kernel flavour supports the Amiga Power-UP System, though it is " +"currently disabled." msgstr "" #. Tag: title @@ -2172,32 +2362,46 @@ msgstr "" #. Tag: para #: hardware.xml:1263 #, no-c-format -msgid "Apple (and briefly a few other manufacturers — Power Computing, for example) made a series of Macintosh computers based on the PowerPC processor. For purposes of architecture support, they are categorized as NuBus (not supported by Debian), OldWorld, and NewWorld." +msgid "" +"Apple (and briefly a few other manufacturers — Power Computing, for " +"example) made a series of Macintosh computers based on the PowerPC " +"processor. For purposes of architecture support, they are categorized as " +"NuBus (not supported by Debian), OldWorld, and NewWorld." msgstr "" #. Tag: para #: hardware.xml:1270 #, no-c-format -msgid "OldWorld systems are most Power Macintoshes with a floppy drive and a PCI bus. Most 603, 603e, 604, and 604e based Power Macintoshes are OldWorld machines. Those pre-iMac PowerPC models from Apple use a four digit naming scheme, except for the beige colored G3 systems, which are also OldWorld." +msgid "" +"OldWorld systems are most Power Macintoshes with a floppy drive and a PCI " +"bus. Most 603, 603e, 604, and 604e based Power Macintoshes are OldWorld " +"machines. Those pre-iMac PowerPC models from Apple use a four digit naming " +"scheme, except for the beige colored G3 systems, which are also OldWorld." msgstr "" #. Tag: para #: hardware.xml:1278 #, no-c-format -msgid "The so called NewWorld PowerMacs are any PowerMacs in translucent colored plastic cases and later models. That includes all iMacs, iBooks, G4 systems, blue colored G3 systems, and most PowerBooks manufactured in and after 1999. The NewWorld PowerMacs are also known for using the <quote>ROM in RAM</quote> system for MacOS, and were manufactured from mid-1998 onwards." +msgid "" +"The so called NewWorld PowerMacs are any PowerMacs in translucent colored " +"plastic cases and later models. That includes all iMacs, iBooks, G4 systems, " +"blue colored G3 systems, and most PowerBooks manufactured in and after 1999. " +"The NewWorld PowerMacs are also known for using the <quote>ROM in RAM</" +"quote> system for MacOS, and were manufactured from mid-1998 onwards." msgstr "" #. Tag: para #: hardware.xml:1286 #, no-c-format -msgid "Specifications for Apple hardware are available at <ulink url=\"http://www.info.apple.com/support/applespec.html\">AppleSpec</ulink>, and, for older hardware, <ulink url=\"http://www.info.apple.com/support/applespec.legacy/index.html\">AppleSpec Legacy</ulink>." +msgid "" +"Specifications for Apple hardware are available at <ulink url=\"http://www." +"info.apple.com/support/applespec.html\">AppleSpec</ulink>, and, for older " +"hardware, <ulink url=\"http://www.info.apple.com/support/applespec.legacy/" +"index.html\">AppleSpec Legacy</ulink>." msgstr "" #. Tag: entry -#: hardware.xml:1302 -#: hardware.xml:1437 -#: hardware.xml:1481 -#: hardware.xml:1510 +#: hardware.xml:1302 hardware.xml:1437 hardware.xml:1481 hardware.xml:1510 #, no-c-format msgid "Model Name/Number" msgstr "" @@ -2221,22 +2425,10 @@ msgid "iMac Bondi Blue, 5 Flavors, Slot Loading" msgstr "" #. Tag: entry -#: hardware.xml:1311 -#: hardware.xml:1314 -#: hardware.xml:1317 -#: hardware.xml:1320 -#: hardware.xml:1323 -#: hardware.xml:1326 -#: hardware.xml:1329 -#: hardware.xml:1332 -#: hardware.xml:1335 -#: hardware.xml:1338 -#: hardware.xml:1341 -#: hardware.xml:1344 -#: hardware.xml:1347 -#: hardware.xml:1350 -#: hardware.xml:1353 -#: hardware.xml:1356 +#: hardware.xml:1311 hardware.xml:1314 hardware.xml:1317 hardware.xml:1320 +#: hardware.xml:1323 hardware.xml:1326 hardware.xml:1329 hardware.xml:1332 +#: hardware.xml:1335 hardware.xml:1338 hardware.xml:1341 hardware.xml:1344 +#: hardware.xml:1347 hardware.xml:1350 hardware.xml:1353 hardware.xml:1356 #, no-c-format msgid "NewWorld" msgstr "NewWorld" @@ -2338,22 +2530,10 @@ msgid "Performa 4400, 54xx, 5500" msgstr "Performa 4400, 54xx, 5500" #. Tag: entry -#: hardware.xml:1359 -#: hardware.xml:1362 -#: hardware.xml:1365 -#: hardware.xml:1368 -#: hardware.xml:1371 -#: hardware.xml:1374 -#: hardware.xml:1377 -#: hardware.xml:1380 -#: hardware.xml:1383 -#: hardware.xml:1386 -#: hardware.xml:1389 -#: hardware.xml:1392 -#: hardware.xml:1398 -#: hardware.xml:1401 -#: hardware.xml:1407 -#: hardware.xml:1413 +#: hardware.xml:1359 hardware.xml:1362 hardware.xml:1365 hardware.xml:1368 +#: hardware.xml:1371 hardware.xml:1374 hardware.xml:1377 hardware.xml:1380 +#: hardware.xml:1383 hardware.xml:1386 hardware.xml:1389 hardware.xml:1392 +#: hardware.xml:1398 hardware.xml:1401 hardware.xml:1407 hardware.xml:1413 #: hardware.xml:1419 #, no-c-format msgid "OldWorld" @@ -2468,8 +2648,7 @@ msgid "APS Tech M*Power 604e/2000" msgstr "APS Tech M*Power 604e/2000" #. Tag: entry -#: hardware.xml:1417 -#: hardware.xml:1443 +#: hardware.xml:1417 hardware.xml:1443 #, no-c-format msgid "Motorola" msgstr "Motorola" @@ -2517,8 +2696,7 @@ msgid "MCP(N)750" msgstr "MCP(N)750" #. Tag: entry -#: hardware.xml:1456 -#: hardware.xml:1487 +#: hardware.xml:1456 hardware.xml:1487 #, no-c-format msgid "IBM RS/6000" msgstr "IBM RS/6000" @@ -2598,7 +2776,17 @@ msgstr "Nubus PowerMac al-architektúra (nem-támogatott)" #. Tag: para #: hardware.xml:1527 #, no-c-format -msgid "NuBus systems are not currently supported by Debian/powerpc. The monolithic Linux/PPC kernel architecture does not have support for these machines; instead, one must use the MkLinux Mach microkernel, which Debian does not yet support. These include the following: <itemizedlist> <listitem><para> Power Macintosh 6100, 7100, 8100 </para></listitem> <listitem><para> Performa 5200, 6200, 6300 </para></listitem> <listitem><para> Powerbook 1400, 2300, and 5300 </para></listitem> <listitem><para> Workgroup Server 6150, 8150, 9150 </para></listitem> </itemizedlist> A linux kernel for these machines and limited support is available at <ulink url=\"http://nubus-pmac.sourceforge.net/\"></ulink>." +msgid "" +"NuBus systems are not currently supported by Debian/powerpc. The monolithic " +"Linux/PPC kernel architecture does not have support for these machines; " +"instead, one must use the MkLinux Mach microkernel, which Debian does not " +"yet support. These include the following: <itemizedlist> <listitem><para> " +"Power Macintosh 6100, 7100, 8100 </para></listitem> <listitem><para> " +"Performa 5200, 6200, 6300 </para></listitem> <listitem><para> Powerbook " +"1400, 2300, and 5300 </para></listitem> <listitem><para> Workgroup Server " +"6150, 8150, 9150 </para></listitem> </itemizedlist> A linux kernel for these " +"machines and limited support is available at <ulink url=\"http://nubus-pmac." +"sourceforge.net/\"></ulink>." msgstr "" #. Tag: title @@ -2610,19 +2798,33 @@ msgstr "" #. Tag: para #: hardware.xml:1566 #, no-c-format -msgid "Macintosh computers using the 680x0 series of processors are <emphasis>not</emphasis> in the PowerPC family but are instead m68k machines. Those models start with <quote>Mac II</quote> series, go on to the <quote>LC</quote> family, then the Centris series, and culminate in the Quadras and Performas. These models usually have a Roman numeral or 3-digit model number such as Mac IIcx, LCIII or Quadra 950." +msgid "" +"Macintosh computers using the 680x0 series of processors are <emphasis>not</" +"emphasis> in the PowerPC family but are instead m68k machines. Those models " +"start with <quote>Mac II</quote> series, go on to the <quote>LC</quote> " +"family, then the Centris series, and culminate in the Quadras and Performas. " +"These models usually have a Roman numeral or 3-digit model number such as " +"Mac IIcx, LCIII or Quadra 950." msgstr "" #. Tag: para #: hardware.xml:1575 #, no-c-format -msgid "This model range started with the Mac II (Mac II, IIx, IIcx, IIci, IIsi, IIvi, IIvx, IIfx), then the LC (LC, LCII, III, III+, 475, 520, 550, 575, 580, 630), then the Mac TV, then the Centris (610, 650, 660AV), the Quadra (605, 610, 630, 650, 660AV, 700, 800, 840AV, 900, 950), and finally the Performa 200-640CD." +msgid "" +"This model range started with the Mac II (Mac II, IIx, IIcx, IIci, IIsi, " +"IIvi, IIvx, IIfx), then the LC (LC, LCII, III, III+, 475, 520, 550, 575, " +"580, 630), then the Mac TV, then the Centris (610, 650, 660AV), the Quadra " +"(605, 610, 630, 650, 660AV, 700, 800, 840AV, 900, 950), and finally the " +"Performa 200-640CD." msgstr "" #. Tag: para #: hardware.xml:1583 #, no-c-format -msgid "In laptops, it started with the Mac Portable, then the PowerBook 100-190cs and the PowerBook Duo 210-550c (excluding PowerBook 500 which is Nubus, please see the section above)." +msgid "" +"In laptops, it started with the Mac Portable, then the PowerBook 100-190cs " +"and the PowerBook Duo 210-550c (excluding PowerBook 500 which is Nubus, " +"please see the section above)." msgstr "" #. Tag: title @@ -2634,13 +2836,42 @@ msgstr "S/390 és zSeries géptípusok" #. Tag: para #: hardware.xml:1600 #, no-c-format -msgid "Complete information regarding supported S/390 and zSeries machines can be found in IBM's Redbook <ulink url=\"http://www.redbooks.ibm.com/pubs/pdfs/redbooks/sg246264.pdf\"> Linux for IBM eServer zSeries and S/390: Distributions</ulink> in chapter 2.1 or at the <ulink url=\"http://www-128.ibm.com/developerworks/linux/linux390/index.html\">zSeries page at the developerWorks</ulink>. In short, G5, Multiprise 3000, G6 and all zSeries are fully supported; Multiprise 2000, G3 and G4 machines are supported with IEEE floating point emulation and thus degraded performance." -msgstr "A támogatott S/390 és zSeries gépekről szóló teljes információ forrása az IBM vörös könyv <ulink url=\"http://www.redbooks.ibm.com/pubs/pdfs/redbooks/sg246264.pdf\"> Linux az IBM eServer zSeries és S/390 gépekre: Disztribúciók</ulink> 2.1 fejezet illetve a <ulink url=\"http://www-128.ibm.com/developerworks/linux/linux390/index.html\">zSeries oldal a developerWorks lapon</ulink>. Röviden: a G5, Multiprise 3000, G6 és minden zSeries teljesen támogatott; a Multiprise 2000, G3 és G4 gépek csak IEEE lebegőpontos emulációval, ami csökkenti a teljesítményt." +msgid "" +"Complete information regarding supported S/390 and zSeries machines can be " +"found in IBM's Redbook <ulink url=\"http://www.redbooks.ibm.com/pubs/pdfs/" +"redbooks/sg246264.pdf\"> Linux for IBM eServer zSeries and S/390: " +"Distributions</ulink> in chapter 2.1 or at the <ulink url=\"http://www-128." +"ibm.com/developerworks/linux/linux390/index.html\">zSeries page at the " +"developerWorks</ulink>. In short, G5, Multiprise 3000, G6 and all zSeries " +"are fully supported; Multiprise 2000, G3 and G4 machines are supported with " +"IEEE floating point emulation and thus degraded performance." +msgstr "" +"A támogatott S/390 és zSeries gépekről szóló teljes információ forrása az " +"IBM vörös könyv <ulink url=\"http://www.redbooks.ibm.com/pubs/pdfs/redbooks/" +"sg246264.pdf\"> Linux az IBM eServer zSeries és S/390 gépekre: " +"Disztribúciók</ulink> 2.1 fejezet illetve a <ulink url=\"http://www-128.ibm." +"com/developerworks/linux/linux390/index.html\">zSeries oldal a " +"developerWorks lapon</ulink>. Röviden: a G5, Multiprise 3000, G6 és minden " +"zSeries teljesen támogatott; a Multiprise 2000, G3 és G4 gépek csak IEEE " +"lebegőpontos emulációval, ami csökkenti a teljesítményt." #. Tag: para #: hardware.xml:1623 #, no-c-format -msgid "Currently the <emphasis>&architecture;</emphasis> port supports several types of Sparc systems. The most common identifiers for Sparc systems are sun4, sun4c, sun4m, sun4d and sun4u. Currently we do not support very old sun4 hardware. However, the other systems are supported. Sun4d has been tested the least of these, so expect possible problems with regard to the kernel stability. Sun4c and Sun4m, the most common of the older Sparc hardware, includes such systems as SparcStation 1, 1+, IPC, IPX and the SparcStation LX, 5, 10, and 20, respectively. The UltraSPARC class systems fall under the sun4u identifier, and are supported using the sun4u set of install images. Some systems that fall under these supported identifiers are known to not be supported. Known unsupported systems are the AP1000 multicomputer and the Tadpole Sparcbook 1. See the <ulink url=\"&url-sparc-linux-faq;\">Linux for SPARCProcessors FAQ</ulink> for complete information." +msgid "" +"Currently the <emphasis>&architecture;</emphasis> port supports several " +"types of Sparc systems. The most common identifiers for Sparc systems are " +"sun4, sun4c, sun4m, sun4d and sun4u. Currently we do not support very old " +"sun4 hardware. However, the other systems are supported. Sun4d has been " +"tested the least of these, so expect possible problems with regard to the " +"kernel stability. Sun4c and Sun4m, the most common of the older Sparc " +"hardware, includes such systems as SparcStation 1, 1+, IPC, IPX and the " +"SparcStation LX, 5, 10, and 20, respectively. The UltraSPARC class systems " +"fall under the sun4u identifier, and are supported using the sun4u set of " +"install images. Some systems that fall under these supported identifiers are " +"known to not be supported. Known unsupported systems are the AP1000 " +"multicomputer and the Tadpole Sparcbook 1. See the <ulink url=\"&url-sparc-" +"linux-faq;\">Linux for SPARCProcessors FAQ</ulink> for complete information." msgstr "" #. Tag: title @@ -2652,19 +2883,34 @@ msgstr "" #. Tag: para #: hardware.xml:1644 #, no-c-format -msgid "Some older Sun workstations, notably the Sun IPX and Sun IPC have memory banks located at fixed locations in physical memory. Thus if the banks are not filled gaps will exist in the physical memory space. The Linux installation requires a contiguous memory block into which to load the kernel and the initial RAMdisk. If this is not available a <quote>Data Access Exception</quote> will result." +msgid "" +"Some older Sun workstations, notably the Sun IPX and Sun IPC have memory " +"banks located at fixed locations in physical memory. Thus if the banks are " +"not filled gaps will exist in the physical memory space. The Linux " +"installation requires a contiguous memory block into which to load the " +"kernel and the initial RAMdisk. If this is not available a <quote>Data " +"Access Exception</quote> will result." msgstr "" #. Tag: para #: hardware.xml:1653 #, no-c-format -msgid "Thus you must configure the memory so that the lowest memory block is contiguous for at least 8Mb. In the IPX and IPC cited above, memory banks are mapped in at 16Mb boundaries. In effect this means that you must have a sufficiently large SIMM in bank zero to hold the kernel and RAMdisk. In this case 4Mb is <emphasis>not</emphasis> sufficient." +msgid "" +"Thus you must configure the memory so that the lowest memory block is " +"contiguous for at least 8Mb. In the IPX and IPC cited above, memory banks " +"are mapped in at 16Mb boundaries. In effect this means that you must have a " +"sufficiently large SIMM in bank zero to hold the kernel and RAMdisk. In this " +"case 4Mb is <emphasis>not</emphasis> sufficient." msgstr "" #. Tag: para #: hardware.xml:1661 #, no-c-format -msgid "Example: In a Sun IPX you have a 16Mb SIMM and a 4Mb SIMM. There are four SIMM banks (0,1,2,3). [Bank zero is that furthest away from the SBUS connectors]. You must therefore install the 16Mb SIMM in bank 0; it is then recommended to install the 4Mb SIMM in bank 2." +msgid "" +"Example: In a Sun IPX you have a 16Mb SIMM and a 4Mb SIMM. There are four " +"SIMM banks (0,1,2,3). [Bank zero is that furthest away from the SBUS " +"connectors]. You must therefore install the 16Mb SIMM in bank 0; it is then " +"recommended to install the 4Mb SIMM in bank 2." msgstr "" #. Tag: title @@ -2676,19 +2922,32 @@ msgstr "" #. Tag: para #: hardware.xml:1673 #, no-c-format -msgid "Especially in the case of older Sun workstations, it is very common for there to be an onboard framebuffer which has been superseded (for example the bwtwo on a sun IPC), and an SBUS card containing a later probably accelerated buffer is then plugged in to an SBUS slot. Under Solaris/SunOS this causes no problems because both cards are initialized." +msgid "" +"Especially in the case of older Sun workstations, it is very common for " +"there to be an onboard framebuffer which has been superseded (for example " +"the bwtwo on a sun IPC), and an SBUS card containing a later probably " +"accelerated buffer is then plugged in to an SBUS slot. Under Solaris/SunOS " +"this causes no problems because both cards are initialized." msgstr "" #. Tag: para #: hardware.xml:1682 #, no-c-format -msgid "However with Linux this can cause a problem, in that the boot PROM monitor may display its output on this additional card; however the linux kernel boot messages may then be directed to the original on board framebuffer, leaving <emphasis>no</emphasis> error messages on the screen, with the machine apparently stuck loading the RAMdisk." +msgid "" +"However with Linux this can cause a problem, in that the boot PROM monitor " +"may display its output on this additional card; however the linux kernel " +"boot messages may then be directed to the original on board framebuffer, " +"leaving <emphasis>no</emphasis> error messages on the screen, with the " +"machine apparently stuck loading the RAMdisk." msgstr "" #. Tag: para #: hardware.xml:1690 #, no-c-format -msgid "To avoid this problem, connect the monitor (if required) to the video card in the lowest numbered SBUS slot (on motherboard card counts as below external slots). Alternatively it is possible to use a serial console." +msgid "" +"To avoid this problem, connect the monitor (if required) to the video card " +"in the lowest numbered SBUS slot (on motherboard card counts as below " +"external slots). Alternatively it is possible to use a serial console." msgstr "" #. Tag: title @@ -2700,25 +2959,45 @@ msgstr "" #. Tag: para #: hardware.xml:1703 #, no-c-format -msgid "You should be using a VGA-compatible display interface for the console terminal. Nearly every modern display card is compatible with VGA. Ancient standards such CGA, MDA, or HGA should also work, assuming you do not require X11 support. Note that X11 is not used during the installation process described in this document." +msgid "" +"You should be using a VGA-compatible display interface for the console " +"terminal. Nearly every modern display card is compatible with VGA. Ancient " +"standards such CGA, MDA, or HGA should also work, assuming you do not " +"require X11 support. Note that X11 is not used during the installation " +"process described in this document." msgstr "" #. Tag: para #: hardware.xml:1711 #, no-c-format -msgid "Debian's support for graphical interfaces is determined by the underlying support found in X.Org's X11 system. Most AGP, PCI and PCIe video cards work under X.Org. Details on supported graphics buses, cards, monitors, and pointing devices can be found at <ulink url=\"&url-xorg;\"></ulink>. Debian &release; ships with X.Org version &x11ver;." +msgid "" +"Debian's support for graphical interfaces is determined by the underlying " +"support found in X.Org's X11 system. Most AGP, PCI and PCIe video cards work " +"under X.Org. Details on supported graphics buses, cards, monitors, and " +"pointing devices can be found at <ulink url=\"&url-xorg;\"></ulink>. Debian " +"&release; ships with X.Org version &x11ver;." msgstr "" #. Tag: para #: hardware.xml:1720 #, no-c-format -msgid "The X.Org X11 window system is only supported on the SGI Indy and the O2. The Broadcom BCM91250A and BCM91480B evaluation boards have standard 3.3v PCI slots and support VGA emulation or Linux framebuffer on a selected range of graphics cards. A <ulink url=\"&url-bcm91250a-hardware;\">compatibility listing</ulink> for Broadcom evaluation boards is available." +msgid "" +"The X.Org X11 window system is only supported on the SGI Indy and the O2. " +"The Broadcom BCM91250A and BCM91480B evaluation boards have standard 3.3v " +"PCI slots and support VGA emulation or Linux framebuffer on a selected range " +"of graphics cards. A <ulink url=\"&url-bcm91250a-hardware;\">compatibility " +"listing</ulink> for Broadcom evaluation boards is available." msgstr "" #. Tag: para #: hardware.xml:1729 #, no-c-format -msgid "The X.Org X11 window system is supported on some DECstation models. The Broadcom BCM91250A and BCM91480B evaluation boards have standard 3.3v PCI slots and support VGA emulation or Linux framebuffer on a selected range of graphics cards. A <ulink url=\"&url-bcm91250a-hardware;\">compatibility listing</ulink> for Broadcom evaluation boards is available." +msgid "" +"The X.Org X11 window system is supported on some DECstation models. The " +"Broadcom BCM91250A and BCM91480B evaluation boards have standard 3.3v PCI " +"slots and support VGA emulation or Linux framebuffer on a selected range of " +"graphics cards. A <ulink url=\"&url-bcm91250a-hardware;\">compatibility " +"listing</ulink> for Broadcom evaluation boards is available." msgstr "" #. Tag: title @@ -2730,14 +3009,18 @@ msgstr "Laptopok" #. Tag: para #: hardware.xml:1741 #, no-c-format -msgid "Laptops are also supported. Laptops are often specialized or contain proprietary hardware. To see if your particular laptop works well with GNU/Linux, see the <ulink url=\"&url-x86-laptop;\">Linux Laptop pages</ulink>" -msgstr "A laptopok is támogatottak. Ezek gyakran specializáltak vagy nem-dokumentált hardvereket tartalmaznak. Annak ellenőrzéséért, hogy a laptopod jól működik-e GNU/Linuxszal, lásd a <ulink url=\"&url-x86-laptop;\">Linux Laptop oldalakat</ulink>" +msgid "" +"Laptops are also supported. Laptops are often specialized or contain " +"proprietary hardware. To see if your particular laptop works well with GNU/" +"Linux, see the <ulink url=\"&url-x86-laptop;\">Linux Laptop pages</ulink>" +msgstr "" +"A laptopok is támogatottak. Ezek gyakran specializáltak vagy nem-dokumentált " +"hardvereket tartalmaznak. Annak ellenőrzéséért, hogy a laptopod jól működik-" +"e GNU/Linuxszal, lásd a <ulink url=\"&url-x86-laptop;\">Linux Laptop " +"oldalakat</ulink>" #. Tag: title -#: hardware.xml:1752 -#: hardware.xml:1774 -#: hardware.xml:1794 -#: hardware.xml:1817 +#: hardware.xml:1752 hardware.xml:1774 hardware.xml:1794 hardware.xml:1817 #, no-c-format msgid "Multiple Processors" msgstr "Többszörös processzorok" @@ -2745,50 +3028,136 @@ msgstr "Többszörös processzorok" #. Tag: para #: hardware.xml:1753 #, no-c-format -msgid "Multi-processor support — also called <quote>symmetric multi-processing</quote> or SMP — is available for this architecture. The standard Debian &release; kernel image was compiled with SMP support. This should not prevent installation, since the SMP kernel should boot on non-SMP systems; the kernel will simply cause a bit more overhead." -msgstr "A több-processzoros támogatás — melyre az angol <quote>symmetric multi-processing</quote> vagy SMP — néven is hivatkoznak szintén elérhető ezen architektúrához. Az alap Debian &release; kernel-kép SMP támogatással került lefordításra. Ez nem gátolja a telepítést, mert az SMP kernel nem-SMP rendszeren is elindul; egyszerűen csak kicsit túlműködik." +msgid "" +"Multi-processor support — also called <quote>symmetric multi-" +"processing</quote> or SMP — is available for this architecture. The " +"standard Debian &release; kernel image was compiled with SMP support. This " +"should not prevent installation, since the SMP kernel should boot on non-SMP " +"systems; the kernel will simply cause a bit more overhead." +msgstr "" +"A több-processzoros támogatás — melyre az angol <quote>symmetric multi-" +"processing</quote> vagy SMP — néven is hivatkoznak szintén elérhető " +"ezen architektúrához. Az alap Debian &release; kernel-kép SMP támogatással " +"került lefordításra. Ez nem gátolja a telepítést, mert az SMP kernel nem-SMP " +"rendszeren is elindul; egyszerűen csak kicsit túlműködik." #. Tag: para #: hardware.xml:1761 #, no-c-format -msgid "In order to optimize the kernel for single CPU systems, you'll have to replace the standard Debian kernel. You can find a discussion of how to do this in <xref linkend=\"kernel-baking\"/>. At this time (kernel version &kernelversion;) the way you disable SMP is to deselect <quote>&smp-config-option;</quote> in the <quote>&smp-config-section;</quote> section of the kernel config." -msgstr "A kernel 1-CPUs rendszerekre optimalizálásához le kell cserélned az alap Debian kernelt. Ennek egy kitárgyalását a <xref linkend=\"kernel-baking\"/> részben találod. Jelenleg (kernel version &kernelversion;) az SMP kikapcsolásának módja a kernel konfiguráció <quote>&smp-config-section;</quote> szakasz <quote>&smp-config-option;</quote> lehetőségének kikapcsolásával lehetséges." +msgid "" +"In order to optimize the kernel for single CPU systems, you'll have to " +"replace the standard Debian kernel. You can find a discussion of how to do " +"this in <xref linkend=\"kernel-baking\"/>. At this time (kernel version " +"&kernelversion;) the way you disable SMP is to deselect <quote>&smp-config-" +"option;</quote> in the <quote>&smp-config-section;</quote> section of the " +"kernel config." +msgstr "" +"A kernel 1-CPUs rendszerekre optimalizálásához le kell cserélned az alap " +"Debian kernelt. Ennek egy kitárgyalását a <xref linkend=\"kernel-baking\"/> " +"részben találod. Jelenleg (kernel version &kernelversion;) az SMP " +"kikapcsolásának módja a kernel konfiguráció <quote>&smp-config-section;</" +"quote> szakasz <quote>&smp-config-option;</quote> lehetőségének " +"kikapcsolásával lehetséges." #. Tag: para #: hardware.xml:1776 #, no-c-format -msgid "Multi-processor support — also called <quote>symmetric multi-processing</quote> or SMP — is available for this architecture. The standard Debian &release; kernel image was compiled with <firstterm>SMP-alternatives</firstterm> support. This means that the kernel will detect the number of processors (or processor cores) and will automatically deactivate SMP on uniprocessor systems." -msgstr "A több-processzoros támogatás — melyre az angol <quote>symmetric multi-processing</quote> vagy SMP — néven is hivatkoznak szintén elérhető ezen architektúrához. Az alap Debian &release; kernel-kép <firstterm>SMP-alternatíva</firstterm> támogatással került lefordításra. Ez azt jelenti, hogy a kernel érzékeli a processzorok (illetve processzor magok) számát és automatikusan kikapcsolja az SMP-t az 1-processzoros rendszereken." +msgid "" +"Multi-processor support — also called <quote>symmetric multi-" +"processing</quote> or SMP — is available for this architecture. The " +"standard Debian &release; kernel image was compiled with <firstterm>SMP-" +"alternatives</firstterm> support. This means that the kernel will detect the " +"number of processors (or processor cores) and will automatically deactivate " +"SMP on uniprocessor systems." +msgstr "" +"A több-processzoros támogatás — melyre az angol <quote>symmetric multi-" +"processing</quote> vagy SMP — néven is hivatkoznak szintén elérhető " +"ezen architektúrához. Az alap Debian &release; kernel-kép <firstterm>SMP-" +"alternatíva</firstterm> támogatással került lefordításra. Ez azt jelenti, " +"hogy a kernel érzékeli a processzorok (illetve processzor magok) számát és " +"automatikusan kikapcsolja az SMP-t az 1-processzoros rendszereken." #. Tag: para #: hardware.xml:1785 #, no-c-format -msgid "The 486 flavour of the Debian kernel image packages for &arch-title; is not compiled with SMP support." -msgstr "A Debian kernel-kép csomagok 486 kivitele &arch-title; architektúrához SMP támogatás nélkül fordított." +msgid "" +"The 486 flavour of the Debian kernel image packages for &arch-title; is not " +"compiled with SMP support." +msgstr "" +"A Debian kernel-kép csomagok 486 kivitele &arch-title; architektúrához SMP " +"támogatás nélkül fordított." #. Tag: para #: hardware.xml:1795 #, no-c-format -msgid "Multi-processor support — also called <quote>symmetric multi-processing</quote> or SMP — is available for this architecture. However, the standard Debian &release; kernel image does not support SMP. This should not prevent installation, since the standard, non-SMP kernel should boot on SMP systems; the kernel will simply use the first CPU." -msgstr "A több-processzoros támogatás — melyre az angol <quote>symmetric multi-processing</quote> vagy SMP — néven is hivatkoznak szintén elérhető ezen architektúrához. De az alap Debian &release; kernel-kép nem támogatja az SMP-t. Ez nem gátolja a telepítést, mert az alap nem-SMP kernel elindul SMP-rendszereken; egyszerűen csak az 1. CPU-t használja." +msgid "" +"Multi-processor support — also called <quote>symmetric multi-" +"processing</quote> or SMP — is available for this architecture. " +"However, the standard Debian &release; kernel image does not support SMP. " +"This should not prevent installation, since the standard, non-SMP kernel " +"should boot on SMP systems; the kernel will simply use the first CPU." +msgstr "" +"A több-processzoros támogatás — melyre az angol <quote>symmetric multi-" +"processing</quote> vagy SMP — néven is hivatkoznak szintén elérhető " +"ezen architektúrához. De az alap Debian &release; kernel-kép nem támogatja " +"az SMP-t. Ez nem gátolja a telepítést, mert az alap nem-SMP kernel elindul " +"SMP-rendszereken; egyszerűen csak az 1. CPU-t használja." #. Tag: para #: hardware.xml:1804 #, no-c-format -msgid "In order to take advantage of multiple processors, you'll have to replace the standard Debian kernel. You can find a discussion of how to do this in <xref linkend=\"kernel-baking\"/>. At this time (kernel version &kernelversion;) the way you enable SMP is to select <quote>&smp-config-option;</quote> in the <quote>&smp-config-section;</quote> section of the kernel config." -msgstr "A többszörös processzor előnyének kihasználásához le kell cserélned az alap Debian kernelt. Ennek egy kitárgyalását a <xref linkend=\"kernel-baking\"/> részben találod. Jelenleg (kernel version &kernelversion;) az SMP kikapcsolásának módja a kernel konfiguráció <quote>&smp-config-section;</quote> szakasz <quote>&smp-config-option;</quote> lehetőségének bekapcsolásával lehetséges." +msgid "" +"In order to take advantage of multiple processors, you'll have to replace " +"the standard Debian kernel. You can find a discussion of how to do this in " +"<xref linkend=\"kernel-baking\"/>. At this time (kernel version " +"&kernelversion;) the way you enable SMP is to select <quote>&smp-config-" +"option;</quote> in the <quote>&smp-config-section;</quote> section of the " +"kernel config." +msgstr "" +"A többszörös processzor előnyének kihasználásához le kell cserélned az alap " +"Debian kernelt. Ennek egy kitárgyalását a <xref linkend=\"kernel-baking\"/> " +"részben találod. Jelenleg (kernel version &kernelversion;) az SMP " +"kikapcsolásának módja a kernel konfiguráció <quote>&smp-config-section;</" +"quote> szakasz <quote>&smp-config-option;</quote> lehetőségének " +"bekapcsolásával lehetséges." #. Tag: para #: hardware.xml:1818 #, no-c-format -msgid "Multi-processor support — also called <quote>symmetric multi-processing</quote> or SMP — is available for this architecture, and is supported by a precompiled Debian kernel image. Depending on your install media, this SMP-capable kernel may or may not be installed by default. This should not prevent installation, since the standard, non-SMP kernel should boot on SMP systems; the kernel will simply use the first CPU." -msgstr "A több-processzoros támogatás — melyre az angol <quote>symmetric multi-processing</quote> vagy SMP — néven is hivatkoznak szintén elérhető ezen architektúrához. A telepítő médiától függően települ vagy sem alapértelmezetten az SMP-képes kernel. Ez nem gátolja a telepítést, mert az alap nem-SMP kernel elindul SMP-rendszereken; egyszerűen csak az 1. CPU-t használja." +msgid "" +"Multi-processor support — also called <quote>symmetric multi-" +"processing</quote> or SMP — is available for this architecture, and is " +"supported by a precompiled Debian kernel image. Depending on your install " +"media, this SMP-capable kernel may or may not be installed by default. This " +"should not prevent installation, since the standard, non-SMP kernel should " +"boot on SMP systems; the kernel will simply use the first CPU." +msgstr "" +"A több-processzoros támogatás — melyre az angol <quote>symmetric multi-" +"processing</quote> vagy SMP — néven is hivatkoznak szintén elérhető " +"ezen architektúrához. A telepítő médiától függően települ vagy sem " +"alapértelmezetten az SMP-képes kernel. Ez nem gátolja a telepítést, mert az " +"alap nem-SMP kernel elindul SMP-rendszereken; egyszerűen csak az 1. CPU-t " +"használja." #. Tag: para #: hardware.xml:1828 #, no-c-format -msgid "In order to take advantage of multiple processors, you should check to see if a kernel package that supports SMP is installed, and if not, choose an appropriate kernel package. You can also build your own customized kernel to support SMP. You can find a discussion of how to do this in <xref linkend=\"kernel-baking\"/>. At this time (kernel version &kernelversion;) the way you enable SMP is to select <quote>&smp-config-option;</quote> in the <quote>&smp-config-section;</quote> section of the kernel config." -msgstr "A többszörös processzor előnyének kihasználásához ellenőrizd, SMP-támogató kernel-csomag települt-e, s ha nem, válassz megfelelőt. Saját SMP-támogató kernelt is építhetsz. Ennek egy kitárgyalását a <xref linkend=\"kernel-baking\"/> részben találod. Jelenleg (kernel version &kernelversion;) az SMP kikapcsolásának módja a kernel konfiguráció <quote>&smp-config-section;</quote> szakasz <quote>&smp-config-option;</quote> lehetőségének bekapcsolásával lehetséges." +msgid "" +"In order to take advantage of multiple processors, you should check to see " +"if a kernel package that supports SMP is installed, and if not, choose an " +"appropriate kernel package. You can also build your own customized kernel to " +"support SMP. You can find a discussion of how to do this in <xref linkend=" +"\"kernel-baking\"/>. At this time (kernel version &kernelversion;) the way " +"you enable SMP is to select <quote>&smp-config-option;</quote> in the " +"<quote>&smp-config-section;</quote> section of the kernel config." +msgstr "" +"A többszörös processzor előnyének kihasználásához ellenőrizd, SMP-támogató " +"kernel-csomag települt-e, s ha nem, válassz megfelelőt. Saját SMP-támogató " +"kernelt is építhetsz. Ennek egy kitárgyalását a <xref linkend=\"kernel-baking" +"\"/> részben találod. Jelenleg (kernel version &kernelversion;) az SMP " +"kikapcsolásának módja a kernel konfiguráció <quote>&smp-config-section;</" +"quote> szakasz <quote>&smp-config-option;</quote> lehetőségének " +"bekapcsolásával lehetséges." #. Tag: title #: hardware.xml:1849 @@ -2799,8 +3168,19 @@ msgstr "Telepítő média" #. Tag: para #: hardware.xml:1851 #, no-c-format -msgid "This section will help you determine which different media types you can use to install Debian. For example, if you have a floppy disk drive on your machine, it can be used to install Debian. There is a whole chapter devoted media, <xref linkend=\"install-methods\"/>, which lists the advantages and disadvantages of each media type. You may want to refer back to this page once you reach that section." -msgstr "E szakasz leírja, milyen média típusokat használhatsz a Debian telepítésére. Például, ha van egy flopi lemez meghajtód a gépen, telepíthető róla a Debian. Van egy egész fejezet, mely erről szól, a <xref linkend=\"install-methods\"/>, mely leírja minden média típus előnyét és hátrányát. Amennyiben odaugrasz, vissza is térhetsz majd ide." +msgid "" +"This section will help you determine which different media types you can use " +"to install Debian. For example, if you have a floppy disk drive on your " +"machine, it can be used to install Debian. There is a whole chapter devoted " +"media, <xref linkend=\"install-methods\"/>, which lists the advantages and " +"disadvantages of each media type. You may want to refer back to this page " +"once you reach that section." +msgstr "" +"E szakasz leírja, milyen média típusokat használhatsz a Debian telepítésére. " +"Például, ha van egy flopi lemez meghajtód a gépen, telepíthető róla a " +"Debian. Van egy egész fejezet, mely erről szól, a <xref linkend=\"install-" +"methods\"/>, mely leírja minden média típus előnyét és hátrányát. Amennyiben " +"odaugrasz, vissza is térhetsz majd ide." #. Tag: title #: hardware.xml:1862 @@ -2811,8 +3191,14 @@ msgstr "Flopik" #. Tag: para #: hardware.xml:1863 #, no-c-format -msgid "In some cases, you'll have to do your first boot from floppy disks. Generally, all you will need is a high-density (1440 kilobytes) 3.5 inch floppy drive." -msgstr "Lehet, hogy semmilyen más lehetőség nem áll rendelkezésedre, mint egy flopiról indítani. Ehhez csak egy nagy-sűrűségű (1440 kilobyte-os) 3,5 hüvelykes flopi meghajtó kell." +msgid "" +"In some cases, you'll have to do your first boot from floppy disks. " +"Generally, all you will need is a high-density (1440 kilobytes) 3.5 inch " +"floppy drive." +msgstr "" +"Lehet, hogy semmilyen más lehetőség nem áll rendelkezésedre, mint egy " +"flopiról indítani. Ehhez csak egy nagy-sűrűségű (1440 kilobyte-os) 3,5 " +"hüvelykes flopi meghajtó kell." #. Tag: para #: hardware.xml:1869 @@ -2829,68 +3215,154 @@ msgstr "CD-ROM/DVD-ROM" #. Tag: para #: hardware.xml:1878 #, no-c-format -msgid "Whenever you see <quote>CD-ROM</quote> in this manual, it applies to both CD-ROMs and DVD-ROMs, because both technologies are really the same from the operating system's point of view, except for some very old nonstandard CD-ROM drives which are neither SCSI nor IDE/ATAPI." -msgstr "Ha e kézikönyvben azt látod: <quote>CD-ROM</quote>, az a CD-ROM és DVD-ROM eszközökre egyaránt vonatkozik, mert az operációs rendszer szempontjából ez ugyanaz, kivéve egyes nagyon régi nem-szabványos CD-ROM meghajtókat, melyek nem SCSI vagy IDE/ATAPI elvűek." +msgid "" +"Whenever you see <quote>CD-ROM</quote> in this manual, it applies to both CD-" +"ROMs and DVD-ROMs, because both technologies are really the same from the " +"operating system's point of view, except for some very old nonstandard CD-" +"ROM drives which are neither SCSI nor IDE/ATAPI." +msgstr "" +"Ha e kézikönyvben azt látod: <quote>CD-ROM</quote>, az a CD-ROM és DVD-ROM " +"eszközökre egyaránt vonatkozik, mert az operációs rendszer szempontjából ez " +"ugyanaz, kivéve egyes nagyon régi nem-szabványos CD-ROM meghajtókat, melyek " +"nem SCSI vagy IDE/ATAPI elvűek." #. Tag: para #: hardware.xml:1885 #, no-c-format -msgid "CD-ROM based installation is supported for some architectures. On machines which support bootable CD-ROMs, you should be able to do a completely <phrase arch=\"not-s390\">floppy-less</phrase> <phrase arch=\"s390\">tape-less</phrase> installation. Even if your system doesn't support booting from a CD-ROM, you can use the CD-ROM in conjunction with the other techniques to install your system, once you've booted up by other means; see <xref linkend=\"boot-installer\"/>." -msgstr "A CD-ROM alapú telepítés a legtöbb architektúrán támogatott. Az indítható CD-ROM lemezeket támogató gépeken teljesen <phrase arch=\"not-s390\">flopi-mentes</phrase> <phrase arch=\"s390\">szalag-mentes</phrase> telepítés végezhető. Még ha a rendszer nem is támogatja a CD-ROM lemezről indítást, a CD-ROM más módokkal együtt használható a telepítésre, miután az indítás megtörtént másképpen; lásd a <xref linkend=\"boot-installer\"/> részt." +msgid "" +"CD-ROM based installation is supported for some architectures. On machines " +"which support bootable CD-ROMs, you should be able to do a completely " +"<phrase arch=\"not-s390\">floppy-less</phrase> <phrase arch=\"s390\">tape-" +"less</phrase> installation. Even if your system doesn't support booting from " +"a CD-ROM, you can use the CD-ROM in conjunction with the other techniques to " +"install your system, once you've booted up by other means; see <xref linkend=" +"\"boot-installer\"/>." +msgstr "" +"A CD-ROM alapú telepítés a legtöbb architektúrán támogatott. Az indítható CD-" +"ROM lemezeket támogató gépeken teljesen <phrase arch=\"not-s390\">flopi-" +"mentes</phrase> <phrase arch=\"s390\">szalag-mentes</phrase> telepítés " +"végezhető. Még ha a rendszer nem is támogatja a CD-ROM lemezről indítást, a " +"CD-ROM más módokkal együtt használható a telepítésre, miután az indítás " +"megtörtént másképpen; lásd a <xref linkend=\"boot-installer\"/> részt." #. Tag: para #: hardware.xml:1897 #, no-c-format -msgid "Both SCSI and IDE/ATAPI CD-ROMs are supported. In addition, all non-standard CD interfaces supported by Linux are supported by the boot disks (such as Mitsumi and Matsushita drives). However, these models might require special boot parameters or other massaging to get them to work, and booting off these non-standard interfaces is unlikely. The <ulink url=\"&url-cd-howto;\">Linux CD-ROM HOWTO</ulink> contains in-depth information on using CD-ROMs with Linux." -msgstr "A SCSI és IDE/ATAPI CD-ROM meghajtók egyaránt támogatottak. Ráadásul az indító lemezek a Linux által támogatott nem-szabványos CD felületeket is támogatják (például Mitsumi és Matsushita meghajtók). Fontos tudni, hogy e modellek különleges indító paramétereket vagy más kezeléseket igényelnek, így a róluk való indítás nem túl örömteli. A <ulink url=\"&url-cd-howto;\">Linux CD-ROM HOGYAN</ulink> nagyon mély leírást tartalmaz a CD-ROM használatáról Linuxon." +msgid "" +"Both SCSI and IDE/ATAPI CD-ROMs are supported. In addition, all non-standard " +"CD interfaces supported by Linux are supported by the boot disks (such as " +"Mitsumi and Matsushita drives). However, these models might require special " +"boot parameters or other massaging to get them to work, and booting off " +"these non-standard interfaces is unlikely. The <ulink url=\"&url-cd-howto;" +"\">Linux CD-ROM HOWTO</ulink> contains in-depth information on using CD-ROMs " +"with Linux." +msgstr "" +"A SCSI és IDE/ATAPI CD-ROM meghajtók egyaránt támogatottak. Ráadásul az " +"indító lemezek a Linux által támogatott nem-szabványos CD felületeket is " +"támogatják (például Mitsumi és Matsushita meghajtók). Fontos tudni, hogy e " +"modellek különleges indító paramétereket vagy más kezeléseket igényelnek, " +"így a róluk való indítás nem túl örömteli. A <ulink url=\"&url-cd-howto;" +"\">Linux CD-ROM HOGYAN</ulink> nagyon mély leírást tartalmaz a CD-ROM " +"használatáról Linuxon." #. Tag: para #: hardware.xml:1907 #, no-c-format -msgid "USB CD-ROM drives are also supported, as are FireWire devices that are supported by the ohci1394 and sbp2 drivers." -msgstr "Az USB CD-ROM és az ohci1394 és sbp2 meghajtók által támogatott FireWire eszközök szintén támogatottak." +msgid "" +"USB CD-ROM drives are also supported, as are FireWire devices that are " +"supported by the ohci1394 and sbp2 drivers." +msgstr "" +"Az USB CD-ROM és az ohci1394 és sbp2 meghajtók által támogatott FireWire " +"eszközök szintén támogatottak." #. Tag: para #: hardware.xml:1912 #, no-c-format -msgid "Both SCSI and IDE/ATAPI CD-ROMs are supported on &arch-title;, as long as the controller is supported by the SRM console. This rules out many add-on controller cards, but most integrated IDE and SCSI chips and controller cards that were provided by the manufacturer can be expected to work. To find out whether your device is supported from the SRM console, see the <ulink url=\"&url-srm-howto;\">SRM HOWTO</ulink>." -msgstr "A SCSI és IDE/ATAPI CD-ROM eszközök is támogatottak &arch-title; architektúrán, ha az SRM konzol támogatja a vezérlőt. Ez kizár több vezérlőkártyát, de a gyártó által nyújtott legtöbb integrált IDE és SCSI csip és vezérlőkártya általában működik. Az SRM konzol által támogatott eszközökről lásd az <ulink url=\"&url-srm-howto;\">SRM HOGYAN</ulink> címet." +msgid "" +"Both SCSI and IDE/ATAPI CD-ROMs are supported on &arch-title;, as long as " +"the controller is supported by the SRM console. This rules out many add-on " +"controller cards, but most integrated IDE and SCSI chips and controller " +"cards that were provided by the manufacturer can be expected to work. To " +"find out whether your device is supported from the SRM console, see the " +"<ulink url=\"&url-srm-howto;\">SRM HOWTO</ulink>." +msgstr "" +"A SCSI és IDE/ATAPI CD-ROM eszközök is támogatottak &arch-title; " +"architektúrán, ha az SRM konzol támogatja a vezérlőt. Ez kizár több " +"vezérlőkártyát, de a gyártó által nyújtott legtöbb integrált IDE és SCSI " +"csip és vezérlőkártya általában működik. Az SRM konzol által támogatott " +"eszközökről lásd az <ulink url=\"&url-srm-howto;\">SRM HOGYAN</ulink> címet." #. Tag: para #: hardware.xml:1921 #, no-c-format -msgid "IDE/ATAPI CD-ROMs are supported on all ARM machines. On RiscPCs, SCSI CD-ROMs are also supported." -msgstr "Az IDE/ATAPI CD-ROM eszközöket minden ARM gép támogatja. A RiscPC a SCSI CD-ROM eszközöket is." +msgid "" +"IDE/ATAPI CD-ROMs are supported on all ARM machines. On RiscPCs, SCSI CD-" +"ROMs are also supported." +msgstr "" +"Az IDE/ATAPI CD-ROM eszközöket minden ARM gép támogatja. A RiscPC a SCSI CD-" +"ROM eszközöket is." #. Tag: para #: hardware.xml:1926 #, no-c-format -msgid "On SGI machines, booting from CD-ROM requires a SCSI CD-ROM drive capable of working with a logical blocksize of 512 bytes. Many of the SCSI CD-ROM drives sold on the PC market do not have this capability. If your CD-ROM drive has a jumper labeled <quote>Unix/PC</quote> or <quote>512/2048</quote>, place it in the <quote>Unix</quote> or <quote>512</quote> position. To start the install, simply choose the <quote>System installation</quote> entry in the firmware. The Broadcom BCM91250A supports standard IDE devices, including CD-ROM drives, but CD images for this platform are currently not provided because the firmware doesn't recognize CD drives. In order to install Debian on an Broadcom BCM91480B evaluation board, you need an PCI IDE, SATA or SCSI card." +msgid "" +"On SGI machines, booting from CD-ROM requires a SCSI CD-ROM drive capable of " +"working with a logical blocksize of 512 bytes. Many of the SCSI CD-ROM " +"drives sold on the PC market do not have this capability. If your CD-ROM " +"drive has a jumper labeled <quote>Unix/PC</quote> or <quote>512/2048</" +"quote>, place it in the <quote>Unix</quote> or <quote>512</quote> position. " +"To start the install, simply choose the <quote>System installation</quote> " +"entry in the firmware. The Broadcom BCM91250A supports standard IDE devices, " +"including CD-ROM drives, but CD images for this platform are currently not " +"provided because the firmware doesn't recognize CD drives. In order to " +"install Debian on an Broadcom BCM91480B evaluation board, you need an PCI " +"IDE, SATA or SCSI card." msgstr "" #. Tag: para #: hardware.xml:1941 #, no-c-format -msgid "On DECstations, booting from CD-ROM requires a SCSI CD-ROM drive capable of working with a logical blocksize of 512 bytes. Many of the SCSI CD-ROM drives sold on the PC market do not have this capability. If your CD-ROM drive has a jumper labeled <quote>Unix/PC</quote> or <quote>512/2048</quote>, place it in the <quote>Unix</quote> or <quote>512</quote> position." +msgid "" +"On DECstations, booting from CD-ROM requires a SCSI CD-ROM drive capable of " +"working with a logical blocksize of 512 bytes. Many of the SCSI CD-ROM " +"drives sold on the PC market do not have this capability. If your CD-ROM " +"drive has a jumper labeled <quote>Unix/PC</quote> or <quote>512/2048</" +"quote>, place it in the <quote>Unix</quote> or <quote>512</quote> position." msgstr "" #. Tag: para #: hardware.xml:1950 #, no-c-format -msgid "CD 1 contains the installer for the r3k-kn02 subarchitecture (the R3000-based DECstations 5000/1xx and 5000/240 as well as the R3000-based Personal DECstation models), CD 2 the installer for the r4k-kn04 subarchitecture (the R4x00-based DECstations 5000/150 and 5000/260 as well as the Personal DECstation 5000/50)." +msgid "" +"CD 1 contains the installer for the r3k-kn02 subarchitecture (the R3000-" +"based DECstations 5000/1xx and 5000/240 as well as the R3000-based Personal " +"DECstation models), CD 2 the installer for the r4k-kn04 subarchitecture (the " +"R4x00-based DECstations 5000/150 and 5000/260 as well as the Personal " +"DECstation 5000/50)." msgstr "" #. Tag: para #: hardware.xml:1959 #, no-c-format -msgid "To boot from CD, issue the command <userinput>boot <replaceable>#</replaceable>/rz<replaceable>id</replaceable></userinput> on the firmware prompt, where <replaceable>#</replaceable> is the number of the TurboChannel device from which to boot (3 on most DECstations) and <replaceable>id</replaceable> is the SCSI ID of the CD-ROM drive. If you need to pass additional parameters, they can optionally be appended with the following syntax:" +msgid "" +"To boot from CD, issue the command <userinput>boot <replaceable>#</" +"replaceable>/rz<replaceable>id</replaceable></userinput> on the firmware " +"prompt, where <replaceable>#</replaceable> is the number of the TurboChannel " +"device from which to boot (3 on most DECstations) and <replaceable>id</" +"replaceable> is the SCSI ID of the CD-ROM drive. If you need to pass " +"additional parameters, they can optionally be appended with the following " +"syntax:" msgstr "" #. Tag: userinput #: hardware.xml:1971 #, no-c-format -msgid "boot <replaceable>#</replaceable>/rz<replaceable>id</replaceable> param1=value1 param2=value2 ..." -msgstr "boot <replaceable>#</replaceable>/rz<replaceable>id</replaceable> param1=érték1 param2=érték2 ..." +msgid "" +"boot <replaceable>#</replaceable>/rz<replaceable>id</replaceable> " +"param1=value1 param2=value2 ..." +msgstr "" +"boot <replaceable>#</replaceable>/rz<replaceable>id</replaceable> " +"param1=érték1 param2=érték2 ..." #. Tag: title #: hardware.xml:1978 @@ -2901,20 +3373,34 @@ msgstr "Merevlemez" #. Tag: para #: hardware.xml:1980 #, no-c-format -msgid "Booting the installation system directly from a hard disk is another option for many architectures. This will require some other operating system to load the installer onto the hard disk." -msgstr "A telepítő rendszer közvetlen merevlemezről indítása egy újabb lehetőség számos architektúrán. Ez egy másik operációs rendszert igényel a telepítő merevlemezre töltéséhez." +msgid "" +"Booting the installation system directly from a hard disk is another option " +"for many architectures. This will require some other operating system to " +"load the installer onto the hard disk." +msgstr "" +"A telepítő rendszer közvetlen merevlemezről indítása egy újabb lehetőség " +"számos architektúrán. Ez egy másik operációs rendszert igényel a telepítő " +"merevlemezre töltéséhez." #. Tag: para #: hardware.xml:1986 #, no-c-format -msgid "In fact, installation from your local disk is the preferred installation technique for most &architecture; machines." -msgstr "Valójában sok &architecture; gépen a helyi lemezről telepítés a legjobb telepítő technika." +msgid "" +"In fact, installation from your local disk is the preferred installation " +"technique for most &architecture; machines." +msgstr "" +"Valójában sok &architecture; gépen a helyi lemezről telepítés a legjobb " +"telepítő technika." #. Tag: para #: hardware.xml:1991 #, no-c-format -msgid "Although the &arch-title; does not allow booting from SunOS (Solaris), you can install from a SunOS partition (UFS slices)." -msgstr "Bár a &arch-title; nem teszi lehetővé a SunOS (Solaris) rendszerről indítást, telepíthetsz egy SunOS partícióról (UFS szeletek)." +msgid "" +"Although the &arch-title; does not allow booting from SunOS (Solaris), you " +"can install from a SunOS partition (UFS slices)." +msgstr "" +"Bár a &arch-title; nem teszi lehetővé a SunOS (Solaris) rendszerről " +"indítást, telepíthetsz egy SunOS partícióról (UFS szeletek)." #. Tag: title #: hardware.xml:1999 @@ -2925,8 +3411,19 @@ msgstr "USB háttértároló" #. Tag: para #: hardware.xml:2001 #, no-c-format -msgid "Many Debian boxes need their floppy and/or CD-ROM drives only for setting up the system and for rescue purposes. If you operate some servers, you will probably already have thought about omitting those drives and using an USB memory stick for installing and (when necessary) for recovering the system. This is also useful for small systems which have no room for unnecessary drives." -msgstr "Sok Debian gépnél csak a telepítésre vagy mentésre merülne fel flopi és/vagy CD-ROM meghajtók használata. Ha üzemeltetsz pár kiszolgálót, alighanem eszedbe fog jutni e meghajtók elhagyása és USB háttértároló használata a rendszer telepítésére és (ha szükséges) visszaállítására. Ez kis rendszereknél is hasznos, ahol nincs hely felesleges meghajtóknak." +msgid "" +"Many Debian boxes need their floppy and/or CD-ROM drives only for setting up " +"the system and for rescue purposes. If you operate some servers, you will " +"probably already have thought about omitting those drives and using an USB " +"memory stick for installing and (when necessary) for recovering the system. " +"This is also useful for small systems which have no room for unnecessary " +"drives." +msgstr "" +"Sok Debian gépnél csak a telepítésre vagy mentésre merülne fel flopi és/vagy " +"CD-ROM meghajtók használata. Ha üzemeltetsz pár kiszolgálót, alighanem " +"eszedbe fog jutni e meghajtók elhagyása és USB háttértároló használata a " +"rendszer telepítésére és (ha szükséges) visszaállítására. Ez kis " +"rendszereknél is hasznos, ahol nincs hely felesleges meghajtóknak." #. Tag: title #: hardware.xml:2013 @@ -2937,20 +3434,34 @@ msgstr "Hálózat" #. Tag: para #: hardware.xml:2015 #, no-c-format -msgid "You can also <emphasis>boot</emphasis> your system over the network. <phrase arch=\"mips\">This is the preferred installation technique for Mips.</phrase>" -msgstr "A rendszer <emphasis>indítása</emphasis> hálózatról is lehetséges. <phrase arch=\"mips\">Ez a fő telepítő mód Mips gépekhez.</phrase>" +msgid "" +"You can also <emphasis>boot</emphasis> your system over the network. <phrase " +"arch=\"mips\">This is the preferred installation technique for Mips.</phrase>" +msgstr "" +"A rendszer <emphasis>indítása</emphasis> hálózatról is lehetséges. <phrase " +"arch=\"mips\">Ez a fő telepítő mód Mips gépekhez.</phrase>" #. Tag: para #: hardware.xml:2021 #, no-c-format -msgid "Diskless installation, using network booting from a local area network and NFS-mounting of all local filesystems, is another option." -msgstr "A lemez-nélküli telepítés helyi hálózatról indítással és az összes helyi fájlrendszer NFS-csatolásával egy másik lehetőség." +msgid "" +"Diskless installation, using network booting from a local area network and " +"NFS-mounting of all local filesystems, is another option." +msgstr "" +"A lemez-nélküli telepítés helyi hálózatról indítással és az összes helyi " +"fájlrendszer NFS-csatolásával egy másik lehetőség." #. Tag: para #: hardware.xml:2026 #, no-c-format -msgid "After the operating system kernel is installed, you can install the rest of your system via any sort of network connection (including PPP after installation of the base system), via FTP or HTTP." -msgstr "Az operációs rendszer magjának telepítése után, a rendszer többi része bármilyen hálózati kapcsolaton át telepíthető (ideértve a PPP-t is az alaprendszer telepítése után) FTP vagy HTTP segítségével." +msgid "" +"After the operating system kernel is installed, you can install the rest of " +"your system via any sort of network connection (including PPP after " +"installation of the base system), via FTP or HTTP." +msgstr "" +"Az operációs rendszer magjának telepítése után, a rendszer többi része " +"bármilyen hálózati kapcsolaton át telepíthető (ideértve a PPP-t is az " +"alaprendszer telepítése után) FTP vagy HTTP segítségével." #. Tag: title #: hardware.xml:2035 @@ -2961,8 +3472,17 @@ msgstr "Un*x vagy GNU rendszer" #. Tag: para #: hardware.xml:2037 #, no-c-format -msgid "If you are running another Unix-like system, you could use it to install &debian; without using the &d-i; described in the rest of the manual. This kind of install may be useful for users with otherwise unsupported hardware or on hosts which can't afford downtime. If you are interested in this technique, skip to the <xref linkend=\"linux-upgrade\"/>." -msgstr "Ha más Unix-szerű rendszert futtatsz, használhatod a Debian telepítésére a &d-i; nélkül e kézikönyvben is leírt módon. Ez hasznos a másképp nem-támogatott hardvert használóknak vagy ha a gépen a telepítéskor nem lehet üzemszünet." +msgid "" +"If you are running another Unix-like system, you could use it to install " +"&debian; without using the &d-i; described in the rest of the manual. This " +"kind of install may be useful for users with otherwise unsupported hardware " +"or on hosts which can't afford downtime. If you are interested in this " +"technique, skip to the <xref linkend=\"linux-upgrade\"/>." +msgstr "" +"Ha más Unix-szerű rendszert futtatsz, használhatod a Debian telepítésére a " +"&d-i; nélkül e kézikönyvben is leírt módon. Ez hasznos a másképp nem-" +"támogatott hardvert használóknak vagy ha a gépen a telepítéskor nem lehet " +"üzemszünet." #. Tag: title #: hardware.xml:2049 @@ -2973,62 +3493,150 @@ msgstr "Támogatott tárolók" #. Tag: para #: hardware.xml:2051 #, no-c-format -msgid "The Debian boot disks contain a kernel which is built to maximize the number of systems it runs on. Unfortunately, this makes for a larger kernel, which includes many drivers that won't be used for your machine (see <xref linkend=\"kernel-baking\"/> to learn how to build your own kernel). Support for the widest possible range of devices is desirable in general, to ensure that Debian can be installed on the widest array of hardware." -msgstr "A Debian indító lemezek kernelei úgy készülnek, hogy a lehető legtöbb rendszert támogassák. Természetesen ez nagyobb, több az adott gépen nem-használt meghajtót tartalmazó kernelt ad (lásd a <xref linkend=\"kernel-baking\"/> részt saját kernel készítéséhez). A lehető legtöbb eszköz támogatása általában jó, ez biztosítja a Debian telepíthetőségét a legtöbb hardveren." +msgid "" +"The Debian boot disks contain a kernel which is built to maximize the number " +"of systems it runs on. Unfortunately, this makes for a larger kernel, which " +"includes many drivers that won't be used for your machine (see <xref linkend=" +"\"kernel-baking\"/> to learn how to build your own kernel). Support for the " +"widest possible range of devices is desirable in general, to ensure that " +"Debian can be installed on the widest array of hardware." +msgstr "" +"A Debian indító lemezek kernelei úgy készülnek, hogy a lehető legtöbb " +"rendszert támogassák. Természetesen ez nagyobb, több az adott gépen nem-" +"használt meghajtót tartalmazó kernelt ad (lásd a <xref linkend=\"kernel-" +"baking\"/> részt saját kernel készítéséhez). A lehető legtöbb eszköz " +"támogatása általában jó, ez biztosítja a Debian telepíthetőségét a legtöbb " +"hardveren." #. Tag: para #: hardware.xml:2061 #, no-c-format -msgid "Generally, the Debian installation system includes support for floppies, IDE drives, IDE floppies, parallel port IDE devices, SCSI controllers and drives, USB, and FireWire. The supported file systems include FAT, Win-32 FAT extensions (VFAT) and NTFS." -msgstr "Általánosságban a Debian telepítő rendszer támogatja a flopikat, IDE meghajtókat, IDE flopikat, párhuzamos portos IDE eszközöket, SCSI vezérlőket és meghajtókat, USB-t és FireWire-t. A támogatott szabvány fájlrendszerek mellett a FAT, Win-32 FAT bővítés (VFAT) és NTFS is támogatott." +msgid "" +"Generally, the Debian installation system includes support for floppies, IDE " +"drives, IDE floppies, parallel port IDE devices, SCSI controllers and " +"drives, USB, and FireWire. The supported file systems include FAT, Win-32 " +"FAT extensions (VFAT) and NTFS." +msgstr "" +"Általánosságban a Debian telepítő rendszer támogatja a flopikat, IDE " +"meghajtókat, IDE flopikat, párhuzamos portos IDE eszközöket, SCSI vezérlőket " +"és meghajtókat, USB-t és FireWire-t. A támogatott szabvány fájlrendszerek " +"mellett a FAT, Win-32 FAT bővítés (VFAT) és NTFS is támogatott." #. Tag: para #: hardware.xml:2068 #, no-c-format -msgid "Disk interfaces that emulate the <quote>AT</quote> hard disk interface — often called MFM, RLL, IDE, or ATA — are supported. Very old 8–bit hard disk controllers used in the IBM XT computer are supported only as a module. SCSI disk controllers from many different manufacturers are supported. See the <ulink url=\"&url-hardware-howto;\">Linux Hardware Compatibility HOWTO</ulink> for more details." -msgstr "Az <quote>AT</quote>-emuláló lemez felületek — nevük gyakran MFM, RLL, IDE, vagy ATA — támogatottak. Az IBM XT számítógépben használt nagyon régi 8–bites merevlemez vezérlők modulként támogatottak. Rengeteg különböző gyártó által szállított SCSI lemez vezérlő támogatott. Lásd a <ulink url=\"&url-hardware-howto;\">Linux Hardver kompatibilitás HOGYAN</ulink> leírást további részletekért." +msgid "" +"Disk interfaces that emulate the <quote>AT</quote> hard disk interface " +"— often called MFM, RLL, IDE, or ATA — are supported. Very old " +"8–bit hard disk controllers used in the IBM XT computer are supported " +"only as a module. SCSI disk controllers from many different manufacturers " +"are supported. See the <ulink url=\"&url-hardware-howto;\">Linux Hardware " +"Compatibility HOWTO</ulink> for more details." +msgstr "" +"Az <quote>AT</quote>-emuláló lemez felületek — nevük gyakran MFM, RLL, " +"IDE, vagy ATA — támogatottak. Az IBM XT számítógépben használt nagyon " +"régi 8–bites merevlemez vezérlők modulként támogatottak. Rengeteg " +"különböző gyártó által szállított SCSI lemez vezérlő támogatott. Lásd a " +"<ulink url=\"&url-hardware-howto;\">Linux Hardver kompatibilitás HOGYAN</" +"ulink> leírást további részletekért." #. Tag: para #: hardware.xml:2078 #, no-c-format -msgid "Pretty much all storage systems supported by the Linux kernel are supported by the Debian installation system. Note that the current Linux kernel does not support floppies on the Macintosh at all, and the Debian installation system doesn't support floppies for Amigas. Also supported on the Atari is the Macintosh HFS system, and AFFS as a module. Macs support the Atari (FAT) file system. Amigas support the FAT file system, and HFS as a module." -msgstr "A Linux kernel által támogatott tárolókat a Debian telepítő rendszer támogatja. Jó tudni, hogy a jelenlegi Linux kernel nem támogatja a flopikat Macintoshon, és a Debian telepítő rendszer nem támogatja a flopikat Amigán. Az Atarin a Macintosh HFS támogatott, az AFFS modulként. A macek támogatják az Atari (FAT) fájlrendszert. Az Amigák ezt támogatják, a HFS-t modulként." +msgid "" +"Pretty much all storage systems supported by the Linux kernel are supported " +"by the Debian installation system. Note that the current Linux kernel does " +"not support floppies on the Macintosh at all, and the Debian installation " +"system doesn't support floppies for Amigas. Also supported on the Atari is " +"the Macintosh HFS system, and AFFS as a module. Macs support the Atari (FAT) " +"file system. Amigas support the FAT file system, and HFS as a module." +msgstr "" +"A Linux kernel által támogatott tárolókat a Debian telepítő rendszer " +"támogatja. Jó tudni, hogy a jelenlegi Linux kernel nem támogatja a flopikat " +"Macintoshon, és a Debian telepítő rendszer nem támogatja a flopikat Amigán. " +"Az Atarin a Macintosh HFS támogatott, az AFFS modulként. A macek támogatják " +"az Atari (FAT) fájlrendszert. Az Amigák ezt támogatják, a HFS-t modulként." #. Tag: para #: hardware.xml:2088 #, no-c-format -msgid "Any storage system supported by the Linux kernel is also supported by the boot system. The following SCSI drivers are supported in the default kernel: <itemizedlist> <listitem><para> Sparc ESP </para></listitem> <listitem><para> PTI Qlogic,ISP </para></listitem> <listitem><para> Adaptec AIC7xxx </para></listitem> <listitem><para> NCR and Symbios 53C8XX </para></listitem> </itemizedlist> IDE systems (such as the UltraSPARC 5) are also supported. See <ulink url=\"&url-sparc-linux-faq;\">Linux for SPARC Processors FAQ</ulink> for more information on SPARC hardware supported by the Linux kernel." -msgstr "Minden Linux kernel által támogatott tárolót támogatja az indító rendszer. Az alábbi SCSI meghajtók támogatottak az alapkernelben: <itemizedlist> <listitem><para> Sparc ESP </para></listitem> <listitem><para> PTI Qlogic,ISP </para></listitem> <listitem><para> Adaptec AIC7xxx </para></listitem> <listitem><para> NCR and Symbios 53C8XX </para></listitem> </itemizedlist> Az IDE rendszerek (mint az UltraSPARC 5) szintén támogatottak. Lásd a <ulink url=\"&url-sparc-linux-faq;\">Linux SPARC Processzorokra GYIK</ulink> leírást a Linux kernel által támogatott valamennyi SPARC hardverért." +msgid "" +"Any storage system supported by the Linux kernel is also supported by the " +"boot system. The following SCSI drivers are supported in the default kernel: " +"<itemizedlist> <listitem><para> Sparc ESP </para></listitem> " +"<listitem><para> PTI Qlogic,ISP </para></listitem> <listitem><para> Adaptec " +"AIC7xxx </para></listitem> <listitem><para> NCR and Symbios 53C8XX </para></" +"listitem> </itemizedlist> IDE systems (such as the UltraSPARC 5) are also " +"supported. See <ulink url=\"&url-sparc-linux-faq;\">Linux for SPARC " +"Processors FAQ</ulink> for more information on SPARC hardware supported by " +"the Linux kernel." +msgstr "" +"Minden Linux kernel által támogatott tárolót támogatja az indító rendszer. " +"Az alábbi SCSI meghajtók támogatottak az alapkernelben: <itemizedlist> " +"<listitem><para> Sparc ESP </para></listitem> <listitem><para> PTI Qlogic," +"ISP </para></listitem> <listitem><para> Adaptec AIC7xxx </para></listitem> " +"<listitem><para> NCR and Symbios 53C8XX </para></listitem> </itemizedlist> " +"Az IDE rendszerek (mint az UltraSPARC 5) szintén támogatottak. Lásd a <ulink " +"url=\"&url-sparc-linux-faq;\">Linux SPARC Processzorokra GYIK</ulink> " +"leírást a Linux kernel által támogatott valamennyi SPARC hardverért." #. Tag: para #: hardware.xml:2121 #, no-c-format -msgid "Any storage system supported by the Linux kernel is also supported by the boot system. This includes both SCSI and IDE disks. Note, however, that on many systems, the SRM console is unable to boot from IDE drives, and the Jensen is unable to boot from floppies. (see <ulink url=\"&url-jensen-howto;\"></ulink> for more information on booting the Jensen)" -msgstr "Minden Linux kernel által támogatott tárolót támogatja az indító rendszer. Ez a SCSI és IDE lemezeket is jelenti. Sok rendszeren az SRM konzol nem indul IDE meghajtókról, és a Jensen nem indul flopiról. (lásd a <ulink url=\"&url-jensen-howto;\"></ulink> leírást erről)" +msgid "" +"Any storage system supported by the Linux kernel is also supported by the " +"boot system. This includes both SCSI and IDE disks. Note, however, that on " +"many systems, the SRM console is unable to boot from IDE drives, and the " +"Jensen is unable to boot from floppies. (see <ulink url=\"&url-jensen-howto;" +"\"></ulink> for more information on booting the Jensen)" +msgstr "" +"Minden Linux kernel által támogatott tárolót támogatja az indító rendszer. " +"Ez a SCSI és IDE lemezeket is jelenti. Sok rendszeren az SRM konzol nem " +"indul IDE meghajtókról, és a Jensen nem indul flopiról. (lásd a <ulink url=" +"\"&url-jensen-howto;\"></ulink> leírást erről)" #. Tag: para #: hardware.xml:2130 #, no-c-format -msgid "Any storage system supported by the Linux kernel is also supported by the boot system. Note that the current Linux kernel does not support floppies on CHRP systems at all." -msgstr "Minden Linux kernel által támogatott tárolót támogatja az indító rendszer. A jelenlegi Linux kernel nem támogatja a flopit CHRP rendszereken." +msgid "" +"Any storage system supported by the Linux kernel is also supported by the " +"boot system. Note that the current Linux kernel does not support floppies on " +"CHRP systems at all." +msgstr "" +"Minden Linux kernel által támogatott tárolót támogatja az indító rendszer. A " +"jelenlegi Linux kernel nem támogatja a flopit CHRP rendszereken." #. Tag: para #: hardware.xml:2136 #, no-c-format -msgid "Any storage system supported by the Linux kernel is also supported by the boot system. Note that the current Linux kernel does not support the floppy drive." -msgstr "Minden Linux kernel által támogatott tárolót támogatja az indító rendszer. A jelenlegi Linux kernel nem támogatja a flopi meghajtót." +msgid "" +"Any storage system supported by the Linux kernel is also supported by the " +"boot system. Note that the current Linux kernel does not support the floppy " +"drive." +msgstr "" +"Minden Linux kernel által támogatott tárolót támogatja az indító rendszer. A " +"jelenlegi Linux kernel nem támogatja a flopi meghajtót." #. Tag: para #: hardware.xml:2142 #, no-c-format -msgid "Any storage system supported by the Linux kernel is also supported by the boot system." -msgstr "Minden Linux kernel által támogatott tárolót támogatja az indító rendszer." +msgid "" +"Any storage system supported by the Linux kernel is also supported by the " +"boot system." +msgstr "" +"Minden Linux kernel által támogatott tárolót támogatja az indító rendszer." #. Tag: para #: hardware.xml:2147 #, no-c-format -msgid "Any storage system supported by the Linux kernel is also supported by the boot system. This means that FBA and ECKD DASDs are supported with the old Linux disk layout (ldl) and the new common S/390 disk layout (cdl)." -msgstr "Minden Linux kernel által támogatott tárolót támogatja az indító rendszer. Ez alapján a régi Linux disk layout (ldl) és az új common S/390 disk layout (cdl) támogatja az FBA-t és az ECKD DASD tárolókat." +msgid "" +"Any storage system supported by the Linux kernel is also supported by the " +"boot system. This means that FBA and ECKD DASDs are supported with the old " +"Linux disk layout (ldl) and the new common S/390 disk layout (cdl)." +msgstr "" +"Minden Linux kernel által támogatott tárolót támogatja az indító rendszer. " +"Ez alapján a régi Linux disk layout (ldl) és az új common S/390 disk layout " +"(cdl) támogatja az FBA-t és az ECKD DASD tárolókat." #. Tag: title #: hardware.xml:2164 @@ -3039,37 +3647,66 @@ msgstr "Perifériák és más hardverek" #. Tag: para #: hardware.xml:2165 #, no-c-format -msgid "Linux supports a large variety of hardware devices such as mice, printers, scanners, PCMCIA and USB devices. However, most of these devices are not required while installing the system." -msgstr "A Linux rengeteg hardver eszközt támogat, mint például az egereket, nyomtatókat, szkennereket, PCMCIA és USB eszközöket. Ezek nem kötelezőek a telepítéskor." +msgid "" +"Linux supports a large variety of hardware devices such as mice, printers, " +"scanners, PCMCIA and USB devices. However, most of these devices are not " +"required while installing the system." +msgstr "" +"A Linux rengeteg hardver eszközt támogat, mint például az egereket, " +"nyomtatókat, szkennereket, PCMCIA és USB eszközöket. Ezek nem kötelezőek a " +"telepítéskor." #. Tag: para #: hardware.xml:2171 #, no-c-format -msgid "USB hardware generally works fine, only some USB keyboards may require additional configuration (see <xref linkend=\"usb-keyboard-config\"/>)." -msgstr "Az USB eszközök általában tökéletesen működnek, csak pár USB billentyűzethez kell egyéni beállítás (lásd a <xref linkend=\"usb-keyboard-config\"/> leírást)." +msgid "" +"USB hardware generally works fine, only some USB keyboards may require " +"additional configuration (see <xref linkend=\"usb-keyboard-config\"/>)." +msgstr "" +"Az USB eszközök általában tökéletesen működnek, csak pár USB billentyűzethez " +"kell egyéni beállítás (lásd a <xref linkend=\"usb-keyboard-config\"/> " +"leírást)." #. Tag: para #: hardware.xml:2177 #, no-c-format -msgid "Again, see the <ulink url=\"&url-hardware-howto;\">Linux Hardware Compatibility HOWTO</ulink> to determine whether your specific hardware is supported by Linux." -msgstr "Ismét csak lásd a <ulink url=\"&url-hardware-howto;\">Linux Hardver kompatibilitás HOGYAN</ulink> leírást a Linux által támogatott hardverről." +msgid "" +"Again, see the <ulink url=\"&url-hardware-howto;\">Linux Hardware " +"Compatibility HOWTO</ulink> to determine whether your specific hardware is " +"supported by Linux." +msgstr "" +"Ismét csak lásd a <ulink url=\"&url-hardware-howto;\">Linux Hardver " +"kompatibilitás HOGYAN</ulink> leírást a Linux által támogatott hardverről." #. Tag: para #: hardware.xml:2183 #, no-c-format -msgid "Package installations from XPRAM and tape are not supported by this system. All packages that you want to install need to be available on a DASD or over the network using NFS, HTTP or FTP." -msgstr "A csomagok telepítését XPRAM vagy szalagos egységről e rendszer nem támogatja. A telepíteni kívánt csomagoknak egy DASD tárolóról vagy hálózatról NFS, HTTP vag FTP használatával elérhetőnek kell lennie." +msgid "" +"Package installations from XPRAM and tape are not supported by this system. " +"All packages that you want to install need to be available on a DASD or over " +"the network using NFS, HTTP or FTP." +msgstr "" +"A csomagok telepítését XPRAM vagy szalagos egységről e rendszer nem " +"támogatja. A telepíteni kívánt csomagoknak egy DASD tárolóról vagy " +"hálózatról NFS, HTTP vag FTP használatával elérhetőnek kell lennie." #. Tag: para #: hardware.xml:2189 #, no-c-format -msgid "The Broadcom BCM91250A evaluation board offers standard 3.3v 32 bit and 64 bit PCI slots as well as USB connectors. The Broadcom BCM91480B evaluation board features four 64 bit PCI slots." +msgid "" +"The Broadcom BCM91250A evaluation board offers standard 3.3v 32 bit and 64 " +"bit PCI slots as well as USB connectors. The Broadcom BCM91480B evaluation " +"board features four 64 bit PCI slots." msgstr "" #. Tag: para #: hardware.xml:2195 #, no-c-format -msgid "The Broadcom BCM91250A evaluation board offers standard 3.3v 32 bit and 64 bit PCI slots as well as USB connectors. The Broadcom BCM91480B evaluation board features four 64 bit PCI slots. The Cobalt RaQ has no support for additional devices but the Qube has one PCI slot." +msgid "" +"The Broadcom BCM91250A evaluation board offers standard 3.3v 32 bit and 64 " +"bit PCI slots as well as USB connectors. The Broadcom BCM91480B evaluation " +"board features four 64 bit PCI slots. The Cobalt RaQ has no support for " +"additional devices but the Qube has one PCI slot." msgstr "" #. Tag: title @@ -3081,25 +3718,42 @@ msgstr "" #. Tag: para #: hardware.xml:2207 #, no-c-format -msgid "There are several vendors, who ship systems with Debian or other distributions of GNU/Linux <ulink url=\"&url-pre-installed;\">pre-installed</ulink>. You might pay more for the privilege, but it does buy a level of peace of mind, since you can be sure that the hardware is well-supported by GNU/Linux." +msgid "" +"There are several vendors, who ship systems with Debian or other " +"distributions of GNU/Linux <ulink url=\"&url-pre-installed;\">pre-installed</" +"ulink>. You might pay more for the privilege, but it does buy a level of " +"peace of mind, since you can be sure that the hardware is well-supported by " +"GNU/Linux." msgstr "" #. Tag: para #: hardware.xml:2215 #, no-c-format -msgid "Unfortunately, it's quite rare to find any vendor shipping new &arch-title; machines at all." +msgid "" +"Unfortunately, it's quite rare to find any vendor shipping new &arch-title; " +"machines at all." msgstr "" #. Tag: para #: hardware.xml:2220 #, no-c-format -msgid "If you do have to buy a machine with Windows bundled, carefully read the software license that comes with Windows; you may be able to reject the license and obtain a rebate from your vendor. Searching the Internet for <quote>windows refund</quote> may get you some useful information to help with that." +msgid "" +"If you do have to buy a machine with Windows bundled, carefully read the " +"software license that comes with Windows; you may be able to reject the " +"license and obtain a rebate from your vendor. Searching the Internet for " +"<quote>windows refund</quote> may get you some useful information to help " +"with that." msgstr "" #. Tag: para #: hardware.xml:2228 #, no-c-format -msgid "Whether or not you are purchasing a system with Linux bundled, or even a used system, it is still important to check that your hardware is supported by the Linux kernel. Check if your hardware is listed in the references found above. Let your salesperson (if any) know that you're shopping for a Linux system. Support Linux-friendly hardware vendors." +msgid "" +"Whether or not you are purchasing a system with Linux bundled, or even a " +"used system, it is still important to check that your hardware is supported " +"by the Linux kernel. Check if your hardware is listed in the references " +"found above. Let your salesperson (if any) know that you're shopping for a " +"Linux system. Support Linux-friendly hardware vendors." msgstr "" #. Tag: title @@ -3111,19 +3765,34 @@ msgstr "" #. Tag: para #: hardware.xml:2240 #, no-c-format -msgid "Some hardware manufacturers simply won't tell us how to write drivers for their hardware. Others won't allow us access to the documentation without a non-disclosure agreement that would prevent us from releasing the Linux source code." +msgid "" +"Some hardware manufacturers simply won't tell us how to write drivers for " +"their hardware. Others won't allow us access to the documentation without a " +"non-disclosure agreement that would prevent us from releasing the Linux " +"source code." msgstr "" #. Tag: para #: hardware.xml:2247 #, no-c-format -msgid "Another example is the proprietary hardware in the older Macintosh line. In fact, no specifications or documentation have ever been released for any Macintosh hardware, most notably the ADB controller (used by the mouse and keyboard), the floppy controller, and all acceleration and CLUT manipulation of the video hardware (though we do now support CLUT manipulation on nearly all internal video chips). In a nutshell, this explains why the Macintosh Linux port lags behind other Linux ports." +msgid "" +"Another example is the proprietary hardware in the older Macintosh line. In " +"fact, no specifications or documentation have ever been released for any " +"Macintosh hardware, most notably the ADB controller (used by the mouse and " +"keyboard), the floppy controller, and all acceleration and CLUT manipulation " +"of the video hardware (though we do now support CLUT manipulation on nearly " +"all internal video chips). In a nutshell, this explains why the Macintosh " +"Linux port lags behind other Linux ports." msgstr "" #. Tag: para #: hardware.xml:2258 #, no-c-format -msgid "Since we haven't been granted access to the documentation on these devices, they simply won't work under Linux. You can help by asking the manufacturers of such hardware to release the documentation. If enough people ask, they will realize that the free software community is an important market." +msgid "" +"Since we haven't been granted access to the documentation on these devices, " +"they simply won't work under Linux. You can help by asking the manufacturers " +"of such hardware to release the documentation. If enough people ask, they " +"will realize that the free software community is an important market." msgstr "" #. Tag: title @@ -3135,19 +3804,50 @@ msgstr "" #. Tag: para #: hardware.xml:2271 #, no-c-format -msgid "A disturbing trend is the proliferation of Windows-specific modems and printers. In some cases these are specially designed to be operated by the Microsoft Windows operating system and bear the legend <quote>WinModem</quote> or <quote>Made especially for Windows-based computers</quote>. This is generally done by removing the embedded processors of the hardware and shifting the work they do over to a Windows driver that is run by your computer's main CPU. This strategy makes the hardware less expensive, but the savings are often <emphasis>not</emphasis> passed on to the user and this hardware may even be more expensive than equivalent devices that retain their embedded intelligence." +msgid "" +"A disturbing trend is the proliferation of Windows-specific modems and " +"printers. In some cases these are specially designed to be operated by the " +"Microsoft Windows operating system and bear the legend <quote>WinModem</" +"quote> or <quote>Made especially for Windows-based computers</quote>. This " +"is generally done by removing the embedded processors of the hardware and " +"shifting the work they do over to a Windows driver that is run by your " +"computer's main CPU. This strategy makes the hardware less expensive, but " +"the savings are often <emphasis>not</emphasis> passed on to the user and " +"this hardware may even be more expensive than equivalent devices that retain " +"their embedded intelligence." msgstr "" #. Tag: para #: hardware.xml:2284 #, no-c-format -msgid "You should avoid Windows-specific hardware for two reasons. The first is that the manufacturers do not generally make the resources available to write a Linux driver. Generally, the hardware and software interface to the device is proprietary, and documentation is not available without a non-disclosure agreement, if it is available at all. This precludes its being used for free software, since free software writers disclose the source code of their programs. The second reason is that when devices like these have had their embedded processors removed, the operating system must perform the work of the embedded processors, often at <emphasis>real-time</emphasis> priority, and thus the CPU is not available to run your programs while it is driving these devices. Since the typical Windows user does not multi-process as intensively as a Linux user, the manufacturers hope that the Windows user simply won't notice the burden this hardware places on their CPU. However, any multi-processing operating system, even Windows 2000 or XP, suffers from degraded performance when peripheral manufacturers skimp on the embedded processing power of their hardware." +msgid "" +"You should avoid Windows-specific hardware for two reasons. The first is " +"that the manufacturers do not generally make the resources available to " +"write a Linux driver. Generally, the hardware and software interface to the " +"device is proprietary, and documentation is not available without a non-" +"disclosure agreement, if it is available at all. This precludes its being " +"used for free software, since free software writers disclose the source code " +"of their programs. The second reason is that when devices like these have " +"had their embedded processors removed, the operating system must perform the " +"work of the embedded processors, often at <emphasis>real-time</emphasis> " +"priority, and thus the CPU is not available to run your programs while it is " +"driving these devices. Since the typical Windows user does not multi-process " +"as intensively as a Linux user, the manufacturers hope that the Windows user " +"simply won't notice the burden this hardware places on their CPU. However, " +"any multi-processing operating system, even Windows 2000 or XP, suffers from " +"degraded performance when peripheral manufacturers skimp on the embedded " +"processing power of their hardware." msgstr "" #. Tag: para #: hardware.xml:2305 #, no-c-format -msgid "You can help improve this situation by encouraging these manufacturers to release the documentation and other resources necessary for us to program their hardware, but the best strategy is simply to avoid this sort of hardware until it is listed as working in the <ulink url=\"&url-hardware-howto;\">Linux Hardware Compatibility HOWTO</ulink>." +msgid "" +"You can help improve this situation by encouraging these manufacturers to " +"release the documentation and other resources necessary for us to program " +"their hardware, but the best strategy is simply to avoid this sort of " +"hardware until it is listed as working in the <ulink url=\"&url-hardware-" +"howto;\">Linux Hardware Compatibility HOWTO</ulink>." msgstr "" #. Tag: title @@ -3159,20 +3859,38 @@ msgstr "" #. Tag: para #: hardware.xml:2319 #, no-c-format -msgid "If you ask for Parity RAM in a computer store, you'll probably get <emphasis>virtual parity</emphasis> memory modules instead of <emphasis>true parity</emphasis> ones. Virtual parity SIMMs can often (but not always) be distinguished because they only have one more chip than an equivalent non-parity SIMM, and that one extra chip is smaller than all the others. Virtual-parity SIMMs work exactly like non-parity memory. They can't tell you when you have a single-bit RAM error the way true-parity SIMMs do in a motherboard that implements parity. Don't ever pay more for a virtual-parity SIMM than a non-parity one. Do expect to pay a little more for true-parity SIMMs, because you are actually buying one extra bit of memory for every 8 bits." +msgid "" +"If you ask for Parity RAM in a computer store, you'll probably get " +"<emphasis>virtual parity</emphasis> memory modules instead of <emphasis>true " +"parity</emphasis> ones. Virtual parity SIMMs can often (but not always) be " +"distinguished because they only have one more chip than an equivalent non-" +"parity SIMM, and that one extra chip is smaller than all the others. Virtual-" +"parity SIMMs work exactly like non-parity memory. They can't tell you when " +"you have a single-bit RAM error the way true-parity SIMMs do in a " +"motherboard that implements parity. Don't ever pay more for a virtual-parity " +"SIMM than a non-parity one. Do expect to pay a little more for true-parity " +"SIMMs, because you are actually buying one extra bit of memory for every 8 " +"bits." msgstr "" #. Tag: para #: hardware.xml:2334 #, no-c-format -msgid "If you want complete information on &arch-title; RAM issues, and what is the best RAM to buy, see the <ulink url=\"&url-pc-hw-faq;\">PC Hardware FAQ</ulink>." -msgstr "Ha teljes információt akarsz a RAM tudnivalókról &arch-title; architektúrán és arról, hogy melyik a legjobb megvehető RAM, lásd a <ulink url=\"&url-pc-hw-faq;\">PC Hardver GYIK</ulink> leírást." +msgid "" +"If you want complete information on &arch-title; RAM issues, and what is the " +"best RAM to buy, see the <ulink url=\"&url-pc-hw-faq;\">PC Hardware FAQ</" +"ulink>." +msgstr "" +"Ha teljes információt akarsz a RAM tudnivalókról &arch-title; architektúrán " +"és arról, hogy melyik a legjobb megvehető RAM, lásd a <ulink url=\"&url-pc-" +"hw-faq;\">PC Hardver GYIK</ulink> leírást." #. Tag: para #: hardware.xml:2340 #, no-c-format msgid "Most, if not all, Alpha systems require true-parity RAM." -msgstr "Általában, ha nem mindig, az Alpha rendszerek valódi-paritásos RAM igényűek." +msgstr "" +"Általában, ha nem mindig, az Alpha rendszerek valódi-paritásos RAM igényűek." #. Tag: title #: hardware.xml:2355 @@ -3183,26 +3901,63 @@ msgstr "Memória és lemezterület szükséglet" #. Tag: para #: hardware.xml:2357 #, no-c-format -msgid "You must have at least &minimum-memory; of memory and &minimum-fs-size; of hard disk space. For a minimal console-based system (all standard packages), 250MB is required. If you want to install a reasonable amount of software, including the X Window System, and some development programs and libraries, you'll need at least 400MB. For a more or less complete desktop system, you'll need a few gigabytes." -msgstr "Legalább &minimum-memory; memória és &minimum-fs-size; merevlemezhely szükséges. Egy alap konzolos rendszerhez (minden szokásos csomaggal) 250 MB. Ha egy kis, X ablakozó rendszert és pár fejlesztői programot és könyvtárat is tartalmazó rendszert szeretnél telepíteni, legalább 400 MB kell. Egy teljes asztali rendszerhez 2-3 GB." +msgid "" +"You must have at least &minimum-memory; of memory and &minimum-fs-size; of " +"hard disk space. For a minimal console-based system (all standard packages), " +"250MB is required. If you want to install a reasonable amount of software, " +"including the X Window System, and some development programs and libraries, " +"you'll need at least 400MB. For a more or less complete desktop system, " +"you'll need a few gigabytes." +msgstr "" +"Legalább &minimum-memory; memória és &minimum-fs-size; merevlemezhely " +"szükséges. Egy alap konzolos rendszerhez (minden szokásos csomaggal) 250 MB. " +"Ha egy kis, X ablakozó rendszert és pár fejlesztői programot és könyvtárat " +"is tartalmazó rendszert szeretnél telepíteni, legalább 400 MB kell. Egy " +"teljes asztali rendszerhez 2-3 GB." #. Tag: para #: hardware.xml:2366 #, no-c-format -msgid "On the Amiga the size of FastRAM is relevant towards the total memory requirements. Also, using Zorro cards with 16-bit RAM is not supported; you'll need 32-bit RAM. The <command>amiboot</command> program can be used to disable 16-bit RAM; see the <ulink url=\"&url-m68k-faq;\">Linux/m68k FAQ</ulink>. Recent kernels should disable 16-bit RAM automatically." -msgstr "Az Amiga gépeken a FastRAM a teljes memória-igény tekintetében a FastRAM számít. A 16-bites RAM kiépítésű Zorro kártyák nem támogatottak; 32-bites RAM kell. Az <command>amiboot</command> programmal kikapcsolható a 16-bites RAM; lásd a <ulink url=\"&url-m68k-faq;\">Linux/m68k GYIK</ulink> leírást. A jelenlegi kernelek automatikusan el tudják végezni ezt." +msgid "" +"On the Amiga the size of FastRAM is relevant towards the total memory " +"requirements. Also, using Zorro cards with 16-bit RAM is not supported; " +"you'll need 32-bit RAM. The <command>amiboot</command> program can be used " +"to disable 16-bit RAM; see the <ulink url=\"&url-m68k-faq;\">Linux/m68k FAQ</" +"ulink>. Recent kernels should disable 16-bit RAM automatically." +msgstr "" +"Az Amiga gépeken a FastRAM a teljes memória-igény tekintetében a FastRAM " +"számít. A 16-bites RAM kiépítésű Zorro kártyák nem támogatottak; 32-bites " +"RAM kell. Az <command>amiboot</command> programmal kikapcsolható a 16-bites " +"RAM; lásd a <ulink url=\"&url-m68k-faq;\">Linux/m68k GYIK</ulink> leírást. A " +"jelenlegi kernelek automatikusan el tudják végezni ezt." #. Tag: para #: hardware.xml:2375 #, no-c-format -msgid "On the Atari, both ST-RAM and Fast RAM (TT-RAM) are used by Linux. Many users have reported problems running the kernel itself in Fast RAM, so the Atari bootstrap will place the kernel in ST-RAM. The minimum requirement for ST-RAM is 2 MB. You will need an additional 12 MB or more of TT-RAM." -msgstr "Az Atari gépeken ST és Fast RAM (TT) is kell. Több felhasználó gondokat észlelt a kernel futtatásakor Fast RAM területen, ezért az Atari bootstrap a kernelt az ST-RAM területre tölti. Legalább 2 MB ST-RAM és további 12 MB TT-RAM szükséges." +msgid "" +"On the Atari, both ST-RAM and Fast RAM (TT-RAM) are used by Linux. Many " +"users have reported problems running the kernel itself in Fast RAM, so the " +"Atari bootstrap will place the kernel in ST-RAM. The minimum requirement for " +"ST-RAM is 2 MB. You will need an additional 12 MB or more of TT-RAM." +msgstr "" +"Az Atari gépeken ST és Fast RAM (TT) is kell. Több felhasználó gondokat " +"észlelt a kernel futtatásakor Fast RAM területen, ezért az Atari bootstrap a " +"kernelt az ST-RAM területre tölti. Legalább 2 MB ST-RAM és további 12 MB TT-" +"RAM szükséges." #. Tag: para #: hardware.xml:2383 #, no-c-format -msgid "On the Macintosh, care should be taken on machines with RAM-based video (RBV). The RAM segment at physical address 0 is used as screen memory, making the default load position for the kernel unavailable. The alternate RAM segment used for kernel and RAMdisk must be at least 4 MB." -msgstr "A Macintoshon légy óvatos a RAM-alapú videóval (RBV). A 0 fizikai cím RAM szegmense képernyő-memóriaként használt, így a kernel nem kerülhet az alap betöltési helyére. A kernel és RAMdisk által használt RAM szegmens legalább 4 MB méretet igényel." +msgid "" +"On the Macintosh, care should be taken on machines with RAM-based video " +"(RBV). The RAM segment at physical address 0 is used as screen memory, " +"making the default load position for the kernel unavailable. The alternate " +"RAM segment used for kernel and RAMdisk must be at least 4 MB." +msgstr "" +"A Macintoshon légy óvatos a RAM-alapú videóval (RBV). A 0 fizikai cím RAM " +"szegmense képernyő-memóriaként használt, így a kernel nem kerülhet az alap " +"betöltési helyére. A kernel és RAMdisk által használt RAM szegmens legalább " +"4 MB méretet igényel." #. Tag: emphasis #: hardware.xml:2393 @@ -3219,26 +3974,58 @@ msgstr "Hálózati csatoló hardverek" #. Tag: para #: hardware.xml:2406 #, no-c-format -msgid "Most PCI and many older ISA network cards are supported. Some network interface cards are not supported by most Debian installation disks, such as AX.25 cards and protocols; NI16510 EtherBlaster cards; Schneider & Koch G16 cards; and the Zenith Z-Note built-in network card. Microchannel (MCA) network cards are not supported by the standard installation system, but see <ulink url=\"&url-linux-mca;\">Linux on MCA</ulink> for some (old) instructions. FDDI networks are also not supported by the installation disks, both cards and protocols." -msgstr "A legtöbb PCI és sok régi ISA hálózati kártya támogatott. Pár hálózati csatoló kártyát a legtöbb Debian telepítő lemez nem támogat, például ezeket: AX.25 kártyák és protokollok; NI16510 EtherBlaster kártyák; Schneider & Koch G16 kártyák és Zenith Z-Note beépített hálózati kártya. A mikrocsatornás (MCA) hálózati kártyákat nem támogatja az alap telepítő rendszer, ám lásd a <ulink url=\"&url-linux-mca;\">Linux MCA-n</ulink> címen található leírást pár (régi) javaslatért. A telepítő lemezek nem támogatják az FDDI hálózatokat, a kártyákat és protokollokat sem." +msgid "" +"Most PCI and many older ISA network cards are supported. Some network " +"interface cards are not supported by most Debian installation disks, such as " +"AX.25 cards and protocols; NI16510 EtherBlaster cards; Schneider & Koch " +"G16 cards; and the Zenith Z-Note built-in network card. Microchannel (MCA) " +"network cards are not supported by the standard installation system, but see " +"<ulink url=\"&url-linux-mca;\">Linux on MCA</ulink> for some (old) " +"instructions. FDDI networks are also not supported by the installation " +"disks, both cards and protocols." +msgstr "" +"A legtöbb PCI és sok régi ISA hálózati kártya támogatott. Pár hálózati " +"csatoló kártyát a legtöbb Debian telepítő lemez nem támogat, például ezeket: " +"AX.25 kártyák és protokollok; NI16510 EtherBlaster kártyák; Schneider & " +"Koch G16 kártyák és Zenith Z-Note beépített hálózati kártya. A " +"mikrocsatornás (MCA) hálózati kártyákat nem támogatja az alap telepítő " +"rendszer, ám lásd a <ulink url=\"&url-linux-mca;\">Linux MCA-n</ulink> címen " +"található leírást pár (régi) javaslatért. A telepítő lemezek nem támogatják " +"az FDDI hálózatokat, a kártyákat és protokollokat sem." #. Tag: para #: hardware.xml:2425 #, no-c-format -msgid "As for ISDN, the D-channel protocol for the (old) German 1TR6 is not supported; Spellcaster BRI ISDN boards are also not supported by the &d-i;." -msgstr "ISDN esetén, a (régi) német 1TR6 D-csatorna protokoll nem támogatott; a &d-i; a Spellcaster BRI ISDN eszközöket sem támogatja." +msgid "" +"As for ISDN, the D-channel protocol for the (old) German 1TR6 is not " +"supported; Spellcaster BRI ISDN boards are also not supported by the &d-i;." +msgstr "" +"ISDN esetén, a (régi) német 1TR6 D-csatorna protokoll nem támogatott; a &d-" +"i; a Spellcaster BRI ISDN eszközöket sem támogatja." #. Tag: para #: hardware.xml:2433 #, no-c-format -msgid "Any network interface card (NIC) supported by the Linux kernel should also be supported by the boot disks. You may need to load your network driver as a module. Again, see <ulink url=\"&url-m68k-faq;\"></ulink> for complete details." -msgstr "Minden Linux kernel által támogatott hálózati csatolót az indító lemezek is támogatnak. Néha előfordulhat, hogy egy bizonyos hálózati meghajtót kézzel kell betölteni. Lásd a <ulink url=\"&url-m68k-faq;\"></ulink> leírást a részletekért." +msgid "" +"Any network interface card (NIC) supported by the Linux kernel should also " +"be supported by the boot disks. You may need to load your network driver as " +"a module. Again, see <ulink url=\"&url-m68k-faq;\"></ulink> for complete " +"details." +msgstr "" +"Minden Linux kernel által támogatott hálózati csatolót az indító lemezek is " +"támogatnak. Néha előfordulhat, hogy egy bizonyos hálózati meghajtót kézzel " +"kell betölteni. Lásd a <ulink url=\"&url-m68k-faq;\"></ulink> leírást a " +"részletekért." #. Tag: para #: hardware.xml:2442 #, no-c-format -msgid "The following network interface cards (NICs) are supported from the bootable kernel directly:" -msgstr "A betölthető kernel az alábbi hálózati csatoló kártyákat (NIC rövidítéssel is ismertek) támogatja közvetlenül:" +msgid "" +"The following network interface cards (NICs) are supported from the bootable " +"kernel directly:" +msgstr "" +"A betölthető kernel az alábbi hálózati csatoló kártyákat (NIC rövidítéssel " +"is ismertek) támogatja közvetlenül:" #. Tag: para #: hardware.xml:2448 @@ -3255,8 +4042,14 @@ msgstr "Sun Happy Meal" #. Tag: para #: hardware.xml:2462 #, no-c-format -msgid "The following network interface cards are supported as modules. They can be enabled once the drivers are installed during the setup. However, due to the magic of OpenPROM, you still should be able to boot from these devices:" -msgstr "Az alábbi hálózati kártyák modulként támogatottak. Ezek alapértelmezetten a meghajtók telepítése után kapcsolhatók be. Az OpenPROM varázsával a indítani is lehet róluk." +msgid "" +"The following network interface cards are supported as modules. They can be " +"enabled once the drivers are installed during the setup. However, due to the " +"magic of OpenPROM, you still should be able to boot from these devices:" +msgstr "" +"Az alábbi hálózati kártyák modulként támogatottak. Ezek alapértelmezetten a " +"meghajtók telepítése után kapcsolhatók be. Az OpenPROM varázsával a indítani " +"is lehet róluk." #. Tag: para #: hardware.xml:2470 @@ -3277,26 +4070,40 @@ msgid "MyriCOM Gigabit Ethernet" msgstr "MyriCOM Gigabit Ethernet" #. Tag: para -#: hardware.xml:2488 -#: hardware.xml:2494 -#: hardware.xml:2500 -#: hardware.xml:2506 +#: hardware.xml:2488 hardware.xml:2494 hardware.xml:2500 hardware.xml:2506 #: hardware.xml:2512 #, no-c-format -msgid "Any network interface card (NIC) supported by the Linux kernel should also be supported by the boot disks. You may need to load your network driver as a module." -msgstr "Minden Linux kernel által támogatott hálózati csatolót az indító lemezek is támogatnak. Néha előfordulhat, hogy egy bizonyos hálózati meghajtót kézzel kell betölteni." +msgid "" +"Any network interface card (NIC) supported by the Linux kernel should also " +"be supported by the boot disks. You may need to load your network driver as " +"a module." +msgstr "" +"Minden Linux kernel által támogatott hálózati csatolót az indító lemezek is " +"támogatnak. Néha előfordulhat, hogy egy bizonyos hálózati meghajtót kézzel " +"kell betölteni." #. Tag: para #: hardware.xml:2518 #, no-c-format -msgid "Due to kernel limitations only the onboard network interfaces on DECstations are supported, TurboChannel option network cards currently do not work." -msgstr "A kernel korlátai miatt DECstation gépeken csak az alaplapi hálózati csatolók támogatottak, a TurboChannel hálózati kártyák jelenleg nem működnek." +msgid "" +"Due to kernel limitations only the onboard network interfaces on DECstations " +"are supported, TurboChannel option network cards currently do not work." +msgstr "" +"A kernel korlátai miatt DECstation gépeken csak az alaplapi hálózati " +"csatolók támogatottak, a TurboChannel hálózati kártyák jelenleg nem működnek." #. Tag: para #: hardware.xml:2524 #, no-c-format -msgid "Any network interface card (NIC) supported by the Linux kernel is also be supported by the boot disks. All network drivers are compiled as modules so you need to load one first during the initial network setup. The list of supported network devices is:" -msgstr "Minden Linux kernel által támogatott hálózati csatolót az indító lemezek is támogatnak. Minden hálózati meghajtó modulként fordított, tehát egyet be kell tölteni a hálózat beállítása során. A támogatott hálózati eszközök:" +msgid "" +"Any network interface card (NIC) supported by the Linux kernel is also be " +"supported by the boot disks. All network drivers are compiled as modules so " +"you need to load one first during the initial network setup. The list of " +"supported network devices is:" +msgstr "" +"Minden Linux kernel által támogatott hálózati csatolót az indító lemezek is " +"támogatnak. Minden hálózati meghajtó modulként fordított, tehát egyet be " +"kell tölteni a hálózat beállítása során. A támogatott hálózati eszközök:" #. Tag: para #: hardware.xml:2532 @@ -3313,8 +4120,11 @@ msgstr "OSA-2 Token Ring/Ethernet és OSA-Express Fast Ethernet (nem-QDIO)" #. Tag: para #: hardware.xml:2542 #, no-c-format -msgid "Inter-User Communication Vehicle (IUCV) — available for VM guests only" -msgstr "Inter-User Communication Vehicle (IUCV) — csak for VM vendégek számára elérhető" +msgid "" +"Inter-User Communication Vehicle (IUCV) — available for VM guests only" +msgstr "" +"Inter-User Communication Vehicle (IUCV) — csak for VM vendégek számára " +"elérhető" #. Tag: para #: hardware.xml:2547 @@ -3325,8 +4135,12 @@ msgstr "OSA-Express QDIO módban, HiperSockets és Guest-LANs" #. Tag: para #: hardware.xml:2556 #, no-c-format -msgid "The following network interface cards are supported directly by the boot disks on Netwinder and CATS machines:" -msgstr "Az alábbi hálózati csatoló kártyákat az indító lemezek közvetlenül támogatják Netwinder és CATS gépeken:" +msgid "" +"The following network interface cards are supported directly by the boot " +"disks on Netwinder and CATS machines:" +msgstr "" +"Az alábbi hálózati csatoló kártyákat az indító lemezek közvetlenül " +"támogatják Netwinder és CATS gépeken:" #. Tag: para #: hardware.xml:2562 @@ -3343,8 +4157,12 @@ msgstr "DECchip Tulip" #. Tag: para #: hardware.xml:2575 #, no-c-format -msgid "The following network interface cards are supported directly by the boot disks on RiscPCs:" -msgstr "Az alábbi hálózati csatoló kártyákat az indító lemezek közvetlenül támogatják RiscPC gépeken:" +msgid "" +"The following network interface cards are supported directly by the boot " +"disks on RiscPCs:" +msgstr "" +"Az alábbi hálózati csatoló kártyákat az indító lemezek közvetlenül " +"támogatják RiscPC gépeken:" #. Tag: para #: hardware.xml:2581 @@ -3367,12 +4185,19 @@ msgstr "EtherH" #. Tag: para #: hardware.xml:2598 #, no-c-format -msgid "If your card is mentioned in the lists above, the complete installation can be carried out from the network with no need for CD-ROMs or floppy disks." -msgstr "Ha a kártya szerepel a listában, a teljes telepítés elvégezhető hálózatról CD-ROM vagy flopi lemezek nélkül." +msgid "" +"If your card is mentioned in the lists above, the complete installation can " +"be carried out from the network with no need for CD-ROMs or floppy disks." +msgstr "" +"Ha a kártya szerepel a listában, a teljes telepítés elvégezhető hálózatról " +"CD-ROM vagy flopi lemezek nélkül." #. Tag: para #: hardware.xml:2604 #, no-c-format -msgid "Any other network interface card (NIC) supported by the Linux kernel should also be supported by the boot disks. You may need to load your network driver as a module; this means that you will have to install the operating system kernel and modules using some other media." +msgid "" +"Any other network interface card (NIC) supported by the Linux kernel should " +"also be supported by the boot disks. You may need to load your network " +"driver as a module; this means that you will have to install the operating " +"system kernel and modules using some other media." msgstr "" - diff --git a/po/hu/partitioning.po b/po/hu/partitioning.po index 927eae8af..b58d995b3 100644 --- a/po/hu/partitioning.po +++ b/po/hu/partitioning.po @@ -1,12 +1,13 @@ msgid "" msgstr "" "Project-Id-Version: \n" -"POT-Creation-Date: \n" +"Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n" +"POT-Creation-Date: 2006-08-18 17:32+0000\n" "PO-Revision-Date: 2006-10-10 11:32+0100\n" "Last-Translator: SZERVÁC Attila <sas@321.hu>\n" "Language-Team: Hungarian\n" "MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=utf-8\n" +"Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Poedit-Language: Hungarian\n" @@ -27,26 +28,86 @@ msgstr "A Debian partíciók és méretük eldöntése" #. Tag: para #: partitioning.xml:14 #, no-c-format -msgid "At a bare minimum, GNU/Linux needs one partition for itself. You can have a single partition containing the entire operating system, applications, and your personal files. Most people feel that a separate swap partition is also a necessity, although it's not strictly true. <quote>Swap</quote> is scratch space for an operating system, which allows the system to use disk storage as <quote>virtual memory</quote>. By putting swap on a separate partition, Linux can make much more efficient use of it. It is possible to force Linux to use a regular file as swap, but it is not recommended." -msgstr "Mint abszolút minimum, a GNU/Linux számára is legalább 1 partíció szükséges. Ekkor az operációs rendszer egésze, az alkalmazások és a személyes fájlok is egy partíción vannak. A többség szerint feltétlenül kell egy önálló csere (swap) partíció, de ez nem feltétlen igaz. A <quote>swap</quote>, vagyis a cserehely analógiával élve egy firka-hely, ahol a rendszer a lemezt, mint <quote>virtuális memória</quote> használhatja. A swap önálló partícióra helyezésével azt a Linux sokkal hatékonyabban használhatja. Rávehető sima fájl használatára is erre, de nem ajánlott." +msgid "" +"At a bare minimum, GNU/Linux needs one partition for itself. You can have a " +"single partition containing the entire operating system, applications, and " +"your personal files. Most people feel that a separate swap partition is also " +"a necessity, although it's not strictly true. <quote>Swap</quote> is scratch " +"space for an operating system, which allows the system to use disk storage " +"as <quote>virtual memory</quote>. By putting swap on a separate partition, " +"Linux can make much more efficient use of it. It is possible to force Linux " +"to use a regular file as swap, but it is not recommended." +msgstr "" +"Mint abszolút minimum, a GNU/Linux számára is legalább 1 partíció szükséges. " +"Ekkor az operációs rendszer egésze, az alkalmazások és a személyes fájlok is " +"egy partíción vannak. A többség szerint feltétlenül kell egy önálló csere " +"(swap) partíció, de ez nem feltétlen igaz. A <quote>swap</quote>, vagyis a " +"cserehely analógiával élve egy firka-hely, ahol a rendszer a lemezt, mint " +"<quote>virtuális memória</quote> használhatja. A swap önálló partícióra " +"helyezésével azt a Linux sokkal hatékonyabban használhatja. Rávehető sima " +"fájl használatára is erre, de nem ajánlott." #. Tag: para #: partitioning.xml:26 #, no-c-format -msgid "Most people choose to give GNU/Linux more than the minimum number of partitions, however. There are two reasons you might want to break up the file system into a number of smaller partitions. The first is for safety. If something happens to corrupt the file system, generally only one partition is affected. Thus, you only have to replace (from the backups you've been carefully keeping) a portion of your system. At a bare minimum, you should consider creating what is commonly called a <quote>root partition</quote>. This contains the most essential components of the system. If any other partitions get corrupted, you can still boot into GNU/Linux to fix the system. This can save you the trouble of having to reinstall the system from scratch." -msgstr "A legtöbben a GNU/Linuxnak a minimálisnál több partíciót adnak. Több partíció használatára 2 jó ok is van. Ezek közül az első a biztonság. Ha valami fájlrendszer-sérülést okoz, általában csak 1 partíció érintett. Így csak a rendszer egy részét kell visszaállítani (a biztonsági mentésekből, melyeket minden jó felhasználó tart). Egy úgynevezett <quote>gyökér partíció</quote> mindenképpen létrehozásra kerül. Ezen helyezkednek el a rendszer legfontosabb összetevői. Ha más partíció sérül, innen még mindig el tudod indítani a telepített GNU/Linux rendszert és helyreállítani a sérült adatokat. Ez is egy biztosíték arra, hogy a rendszert soha ne kelljen az alapoktól újratelepítened." +msgid "" +"Most people choose to give GNU/Linux more than the minimum number of " +"partitions, however. There are two reasons you might want to break up the " +"file system into a number of smaller partitions. The first is for safety. If " +"something happens to corrupt the file system, generally only one partition " +"is affected. Thus, you only have to replace (from the backups you've been " +"carefully keeping) a portion of your system. At a bare minimum, you should " +"consider creating what is commonly called a <quote>root partition</quote>. " +"This contains the most essential components of the system. If any other " +"partitions get corrupted, you can still boot into GNU/Linux to fix the " +"system. This can save you the trouble of having to reinstall the system from " +"scratch." +msgstr "" +"A legtöbben a GNU/Linuxnak a minimálisnál több partíciót adnak. Több " +"partíció használatára 2 jó ok is van. Ezek közül az első a biztonság. Ha " +"valami fájlrendszer-sérülést okoz, általában csak 1 partíció érintett. Így " +"csak a rendszer egy részét kell visszaállítani (a biztonsági mentésekből, " +"melyeket minden jó felhasználó tart). Egy úgynevezett <quote>gyökér " +"partíció</quote> mindenképpen létrehozásra kerül. Ezen helyezkednek el a " +"rendszer legfontosabb összetevői. Ha más partíció sérül, innen még mindig el " +"tudod indítani a telepített GNU/Linux rendszert és helyreállítani a sérült " +"adatokat. Ez is egy biztosíték arra, hogy a rendszert soha ne kelljen az " +"alapoktól újratelepítened." #. Tag: para #: partitioning.xml:40 #, no-c-format -msgid "The second reason is generally more important in a business setting, but it really depends on your use of the machine. For example, a mail server getting spammed with e-mail can easily fill a partition. If you made <filename>/var/mail</filename> a separate partition on the mail server, most of the system will remain working even if you get spammed." -msgstr "A másik fő ok sűrűbben fordul elő az üzleti életben, de valójában attól függ, mire használod a gépet. Például, ha egy levelező kiszolgálón kívülről is fogadsz leveleket, a levél-szemét könnyen betölthet egy partíciót. Ha a filename>/var/mail</filename> egy önálló partícióra kerül egy ilyen gépen, a rendszer többi része még ekkor is rendesen működik majd." +msgid "" +"The second reason is generally more important in a business setting, but it " +"really depends on your use of the machine. For example, a mail server " +"getting spammed with e-mail can easily fill a partition. If you made " +"<filename>/var/mail</filename> a separate partition on the mail server, most " +"of the system will remain working even if you get spammed." +msgstr "" +"A másik fő ok sűrűbben fordul elő az üzleti életben, de valójában attól " +"függ, mire használod a gépet. Például, ha egy levelező kiszolgálón kívülről " +"is fogadsz leveleket, a levél-szemét könnyen betölthet egy partíciót. Ha a " +"filename>/var/mail</filename> egy önálló partícióra kerül egy ilyen gépen, a " +"rendszer többi része még ekkor is rendesen működik majd." #. Tag: para #: partitioning.xml:48 #, no-c-format -msgid "The only real drawback to using more partitions is that it is often difficult to know in advance what your needs will be. If you make a partition too small then you will either have to reinstall the system or you will be constantly moving things around to make room in the undersized partition. On the other hand, if you make the partition too big, you will be wasting space that could be used elsewhere. Disk space is cheap nowadays, but why throw your money away?" -msgstr "Több partíció használatától csak az tarthat vissza, hogy néha nehéz megjósolni, mire lesz szükség. Ha egy partíció egyszer túl kicsi lesz, automatikusan vagy véglegesen át kell rakni tartalmát egy másikra, vagy átméretezni, de néha ilyenkor inkább újratelepít az ember. Ezzel szemben, ha egy partíció túl nagy, esetleg kiesik hely, ami megfelelne másra. A lemezhely olcsó manapság, de miért pazarolnánk?" +msgid "" +"The only real drawback to using more partitions is that it is often " +"difficult to know in advance what your needs will be. If you make a " +"partition too small then you will either have to reinstall the system or you " +"will be constantly moving things around to make room in the undersized " +"partition. On the other hand, if you make the partition too big, you will be " +"wasting space that could be used elsewhere. Disk space is cheap nowadays, " +"but why throw your money away?" +msgstr "" +"Több partíció használatától csak az tarthat vissza, hogy néha nehéz " +"megjósolni, mire lesz szükség. Ha egy partíció egyszer túl kicsi lesz, " +"automatikusan vagy véglegesen át kell rakni tartalmát egy másikra, vagy " +"átméretezni, de néha ilyenkor inkább újratelepít az ember. Ezzel szemben, ha " +"egy partíció túl nagy, esetleg kiesik hely, ami megfelelne másra. A " +"lemezhely olcsó manapság, de miért pazarolnánk?" #. Tag: title #: partitioning.xml:67 @@ -57,8 +118,18 @@ msgstr "A könyvtárfa" #. Tag: para #: partitioning.xml:68 #, no-c-format -msgid "&debian; adheres to the <ulink url=\"&url-fhs-home;\">Filesystem Hierarchy Standard</ulink> for directory and file naming. This standard allows users and software programs to predict the location of files and directories. The root level directory is represented simply by the slash <filename>/</filename>. At the root level, all Debian systems include these directories:" -msgstr "A &debian; a <ulink url=\"&url-fhs-home;\">Fájlrendszer Hierarchia Szabvány</ulink>-t követi. E szabvánnyal a felhasználók és programok számára megjósolható a fájlok és könyvtárak helye. A gyökér szintű könyvtárat a <filename>/</filename> jelenti. A gyökér szintjén minden Debian rendszer tartalmazza e könyvtárakat:" +msgid "" +"&debian; adheres to the <ulink url=\"&url-fhs-home;\">Filesystem Hierarchy " +"Standard</ulink> for directory and file naming. This standard allows users " +"and software programs to predict the location of files and directories. The " +"root level directory is represented simply by the slash <filename>/</" +"filename>. At the root level, all Debian systems include these directories:" +msgstr "" +"A &debian; a <ulink url=\"&url-fhs-home;\">Fájlrendszer Hierarchia Szabvány</" +"ulink>-t követi. E szabvánnyal a felhasználók és programok számára " +"megjósolható a fájlok és könyvtárak helye. A gyökér szintű könyvtárat a " +"<filename>/</filename> jelenti. A gyökér szintjén minden Debian rendszer " +"tartalmazza e könyvtárakat:" #. Tag: entry #: partitioning.xml:82 @@ -279,38 +350,115 @@ msgstr "Hozzáadott alkalmazás szoftver csomagok" #. Tag: para #: partitioning.xml:142 #, no-c-format -msgid "The following is a list of important considerations regarding directories and partitions. Note that disk usage varies widely given system configuration and specific usage patterns. The recommendations here are general guidelines and provide a starting point for partitioning." -msgstr "Alább a könyvtárakhoz és partíciókhoz kötődő legfontosabb szempontok sora. A lemez használat nagyon eltér az adott rendszer összeállításnál és felhasználói módnál. Az ajánlások itt általános útmutatók és kiindulópontot adnak a particionáláshoz." +msgid "" +"The following is a list of important considerations regarding directories " +"and partitions. Note that disk usage varies widely given system " +"configuration and specific usage patterns. The recommendations here are " +"general guidelines and provide a starting point for partitioning." +msgstr "" +"Alább a könyvtárakhoz és partíciókhoz kötődő legfontosabb szempontok sora. A " +"lemez használat nagyon eltér az adott rendszer összeállításnál és " +"felhasználói módnál. Az ajánlások itt általános útmutatók és kiindulópontot " +"adnak a particionáláshoz." #. Tag: para #: partitioning.xml:152 #, no-c-format -msgid "The root partition <filename>/</filename> must always physically contain <filename>/etc</filename>, <filename>/bin</filename>, <filename>/sbin</filename>, <filename>/lib</filename> and <filename>/dev</filename>, otherwise you won't be able to boot. Typically 150–250MB is needed for the root partition." -msgstr "A <filename>/</filename> gyökér partíció kötelezően fizikailag tartalmazza a <filename>/etc</filename>, <filename>/bin</filename>, <filename>/sbin</filename>, <filename>/lib</filename> és <filename>/dev</filename> könyvtárakat, másképp nem indítható. Általában 150–250MB kell erre." +msgid "" +"The root partition <filename>/</filename> must always physically contain " +"<filename>/etc</filename>, <filename>/bin</filename>, <filename>/sbin</" +"filename>, <filename>/lib</filename> and <filename>/dev</filename>, " +"otherwise you won't be able to boot. Typically 150–250MB is needed for " +"the root partition." +msgstr "" +"A <filename>/</filename> gyökér partíció kötelezően fizikailag tartalmazza a " +"<filename>/etc</filename>, <filename>/bin</filename>, <filename>/sbin</" +"filename>, <filename>/lib</filename> és <filename>/dev</filename> " +"könyvtárakat, másképp nem indítható. Általában 150–250MB kell erre." #. Tag: para #: partitioning.xml:161 #, no-c-format -msgid "<filename>/usr</filename>: contains all user programs (<filename>/usr/bin</filename>), libraries (<filename>/usr/lib</filename>), documentation (<filename>/usr/share/doc</filename>), etc. This is the part of the file system that generally takes up most space. You should provide at least 500MB of disk space. This amount should be increased depending on the number and type of packages you plan to install. A generous workstation or server installation should allow 4–6GB." -msgstr "<filename>/usr</filename>: az alapvetőkön kívül a felhasználók alábbi fájljait tartalmazza: programok (<filename>/usr/bin</filename>), függvény-könyvtárak (<filename>/usr/lib</filename>), dokumentáció (<filename>/usr/share/doc</filename>), stb. Általában ez a legnagyobb partíció. Legalább 500MB helyet adj neki. Ezt a telepíteni tervezett csomagok száma és típusa növeli. Egy mindent-bele típusú munkaállomáson vagy kiszolgálón akár a 4–6GB méretet is könnyen elérheti." +msgid "" +"<filename>/usr</filename>: contains all user programs (<filename>/usr/bin</" +"filename>), libraries (<filename>/usr/lib</filename>), documentation " +"(<filename>/usr/share/doc</filename>), etc. This is the part of the file " +"system that generally takes up most space. You should provide at least 500MB " +"of disk space. This amount should be increased depending on the number and " +"type of packages you plan to install. A generous workstation or server " +"installation should allow 4–6GB." +msgstr "" +"<filename>/usr</filename>: az alapvetőkön kívül a felhasználók alábbi " +"fájljait tartalmazza: programok (<filename>/usr/bin</filename>), függvény-" +"könyvtárak (<filename>/usr/lib</filename>), dokumentáció (<filename>/usr/" +"share/doc</filename>), stb. Általában ez a legnagyobb partíció. Legalább " +"500MB helyet adj neki. Ezt a telepíteni tervezett csomagok száma és típusa " +"növeli. Egy mindent-bele típusú munkaállomáson vagy kiszolgálón akár a " +"4–6GB méretet is könnyen elérheti." #. Tag: para #: partitioning.xml:174 #, no-c-format -msgid "<filename>/var</filename>: variable data like news articles, e-mails, web sites, databases, the packaging system cache, etc. will be placed under this directory. The size of this directory depends greatly on the usage of your system, but for most people will be dictated by the package management tool's overhead. If you are going to do a full installation of just about everything Debian has to offer, all in one session, setting aside 2 or 3 GB of space for <filename>/var</filename> should be sufficient. If you are going to install in pieces (that is to say, install services and utilities, followed by text stuff, then X, ...), you can get away with 300–500 MB. If hard drive space is at a premium and you don't plan on doing major system updates, you can get by with as little as 30 or 40 MB." -msgstr "<filename>/var</filename>: a változó adatok, mint hírek, email üzenetek, web lapok, adatbázisok, csomagkezelő gyorstár, stb. kerülnek ide. E könyvtár mérete nagyban függ a rendszer használatának módjától, de a legtöbb felhasználó számára a csomagkezelő eszköz használatának módja szabja meg. Ha a Debian nagyon sok csomagját egyben telepíted a <filename>/var</filename> számára még 2 vagy 3 GB hely is szükséges lehet. Ha rendre telepíted a dolgokat (így például előbb a szolgáltatásokat és eszközöket, majd a szövegkezelőket, majd az X rendszert, ...), 300–500 MB elég. Ha a merevlemezen lévő hellyel nagyon spórolni kell és nem tervezel nagy rendszer-frissítéseket, akár még 30 vagy 40 MB méretre is lekicsinyíthető." +msgid "" +"<filename>/var</filename>: variable data like news articles, e-mails, web " +"sites, databases, the packaging system cache, etc. will be placed under this " +"directory. The size of this directory depends greatly on the usage of your " +"system, but for most people will be dictated by the package management " +"tool's overhead. If you are going to do a full installation of just about " +"everything Debian has to offer, all in one session, setting aside 2 or 3 GB " +"of space for <filename>/var</filename> should be sufficient. If you are " +"going to install in pieces (that is to say, install services and utilities, " +"followed by text stuff, then X, ...), you can get away with 300–500 " +"MB. If hard drive space is at a premium and you don't plan on doing major " +"system updates, you can get by with as little as 30 or 40 MB." +msgstr "" +"<filename>/var</filename>: a változó adatok, mint hírek, email üzenetek, web " +"lapok, adatbázisok, csomagkezelő gyorstár, stb. kerülnek ide. E könyvtár " +"mérete nagyban függ a rendszer használatának módjától, de a legtöbb " +"felhasználó számára a csomagkezelő eszköz használatának módja szabja meg. Ha " +"a Debian nagyon sok csomagját egyben telepíted a <filename>/var</filename> " +"számára még 2 vagy 3 GB hely is szükséges lehet. Ha rendre telepíted a " +"dolgokat (így például előbb a szolgáltatásokat és eszközöket, majd a " +"szövegkezelőket, majd az X rendszert, ...), 300–500 MB elég. Ha a " +"merevlemezen lévő hellyel nagyon spórolni kell és nem tervezel nagy rendszer-" +"frissítéseket, akár még 30 vagy 40 MB méretre is lekicsinyíthető." #. Tag: para #: partitioning.xml:190 #, no-c-format -msgid "<filename>/tmp</filename>: temporary data created by programs will most likely go in this directory. 40–100MB should usually be enough. Some applications — including archive manipulators, CD/DVD authoring tools, and multimedia software — may use <filename>/tmp</filename> to temporarily store image files. If you plan to use such applications, you should adjust the space available in <filename>/tmp</filename> accordingly." -msgstr "<filename>/tmp</filename>: a programok által létrehozott átmeneti adatok általában ide kerülnek. 40–100MB általában elég. Egyes alkalmazások — például archívum kezelők, CD/DVD készítők és multimédia szoftverek — a <filename>/tmp</filename> könyvtárat képmás fájlok tárolására használhatják. Ha ilyen alkalmazások használatát tervezed, igazítsd a <filename>/tmp</filename> könyvtárban elérhető helyet ehhez." +msgid "" +"<filename>/tmp</filename>: temporary data created by programs will most " +"likely go in this directory. 40–100MB should usually be enough. Some " +"applications — including archive manipulators, CD/DVD authoring tools, " +"and multimedia software — may use <filename>/tmp</filename> to " +"temporarily store image files. If you plan to use such applications, you " +"should adjust the space available in <filename>/tmp</filename> accordingly." +msgstr "" +"<filename>/tmp</filename>: a programok által létrehozott átmeneti adatok " +"általában ide kerülnek. 40–100MB általában elég. Egyes alkalmazások " +"— például archívum kezelők, CD/DVD készítők és multimédia szoftverek " +"— a <filename>/tmp</filename> könyvtárat képmás fájlok tárolására " +"használhatják. Ha ilyen alkalmazások használatát tervezed, igazítsd a " +"<filename>/tmp</filename> könyvtárban elérhető helyet ehhez." #. Tag: para #: partitioning.xml:201 #, no-c-format -msgid "<filename>/home</filename>: every user will put his personal data into a subdirectory of this directory. Its size depends on how many users will be using the system and what files are to be stored in their directories. Depending on your planned usage you should reserve about 100MB for each user, but adapt this value to your needs. Reserve a lot more space if you plan to save a lot of multimedia files (pictures, MP3, movies) in your home directory." -msgstr "<filename>/home</filename>: a felhasználók személyes adataikat e könyvtár alkönyvtáraiba teszik. Mérete függ számuktól és attól, hogy milyen fájlokat tárolnak e saját könyvtáraikban. A tervezett felhasználástól függően általában jó legalább 100MB helyet fenntartani mindegyiküknek, de igazítsd ezt az értéket igényeidhez. Tarts fent sokkal több helyet, ha sok multimédia fájl (képek, zenék, filmek) mentését tervezed saját könyvtáradba." +msgid "" +"<filename>/home</filename>: every user will put his personal data into a " +"subdirectory of this directory. Its size depends on how many users will be " +"using the system and what files are to be stored in their directories. " +"Depending on your planned usage you should reserve about 100MB for each " +"user, but adapt this value to your needs. Reserve a lot more space if you " +"plan to save a lot of multimedia files (pictures, MP3, movies) in your home " +"directory." +msgstr "" +"<filename>/home</filename>: a felhasználók személyes adataikat e könyvtár " +"alkönyvtáraiba teszik. Mérete függ számuktól és attól, hogy milyen fájlokat " +"tárolnak e saját könyvtáraikban. A tervezett felhasználástól függően " +"általában jó legalább 100MB helyet fenntartani mindegyiküknek, de igazítsd " +"ezt az értéket igényeidhez. Tarts fent sokkal több helyet, ha sok multimédia " +"fájl (képek, zenék, filmek) mentését tervezed saját könyvtáradba." #. Tag: title #: partitioning.xml:222 @@ -321,56 +469,142 @@ msgstr "Ajánlott partíciós séma" #. Tag: para #: partitioning.xml:223 #, no-c-format -msgid "For new users, personal Debian boxes, home systems, and other single-user setups, a single <filename>/</filename> partition (plus swap) is probably the easiest, simplest way to go. However, if your partition is larger than around 6GB, choose ext3 as your partition type. Ext2 partitions need periodic file system integrity checking, and this can cause delays during booting when the partition is large." -msgstr "Új felhasználóknak, személyes Debian gépekre, otthoni rendszerekre és más 1-felhasználós telepítésekre egyetlen <filename>/</filename> partíció (és egy cserehely) a legkönnyebb, legegyszerűbb mód. Ha a partíció nagyobb, mint 6GB, mindenképp válassz ext3 partíció típust. Az ext2 partíciók ismételt fájlrendszer-ellenőrzést igényelnek és ez időnként késleltetheti az indítást, ha egy partíció nagy." +msgid "" +"For new users, personal Debian boxes, home systems, and other single-user " +"setups, a single <filename>/</filename> partition (plus swap) is probably " +"the easiest, simplest way to go. However, if your partition is larger than " +"around 6GB, choose ext3 as your partition type. Ext2 partitions need " +"periodic file system integrity checking, and this can cause delays during " +"booting when the partition is large." +msgstr "" +"Új felhasználóknak, személyes Debian gépekre, otthoni rendszerekre és más 1-" +"felhasználós telepítésekre egyetlen <filename>/</filename> partíció (és egy " +"cserehely) a legkönnyebb, legegyszerűbb mód. Ha a partíció nagyobb, mint " +"6GB, mindenképp válassz ext3 partíció típust. Az ext2 partíciók ismételt " +"fájlrendszer-ellenőrzést igényelnek és ez időnként késleltetheti az " +"indítást, ha egy partíció nagy." #. Tag: para #: partitioning.xml:232 #, no-c-format -msgid "For multi-user systems or systems with lots of disk space, it's best to put <filename>/usr</filename>, <filename>/var</filename>, <filename>/tmp</filename>, and <filename>/home</filename> each on their own partitions separate from the <filename>/</filename> partition." -msgstr "Ha több felhasználó használhatja a rendszert és van hely, a legjobb séma, ha a <filename>/usr</filename>, <filename>/var</filename>, <filename>/tmp</filename>, és <filename>/home</filename> mind saját partícióra kerül a <filename>/</filename> partíciótól külön." +msgid "" +"For multi-user systems or systems with lots of disk space, it's best to put " +"<filename>/usr</filename>, <filename>/var</filename>, <filename>/tmp</" +"filename>, and <filename>/home</filename> each on their own partitions " +"separate from the <filename>/</filename> partition." +msgstr "" +"Ha több felhasználó használhatja a rendszert és van hely, a legjobb séma, ha " +"a <filename>/usr</filename>, <filename>/var</filename>, <filename>/tmp</" +"filename>, és <filename>/home</filename> mind saját partícióra kerül a " +"<filename>/</filename> partíciótól külön." #. Tag: para #: partitioning.xml:240 #, no-c-format -msgid "You might need a separate <filename>/usr/local</filename> partition if you plan to install many programs that are not part of the Debian distribution. If your machine will be a mail server, you might need to make <filename>/var/mail</filename> a separate partition. Often, putting <filename>/tmp</filename> on its own partition, for instance 20–50MB, is a good idea. If you are setting up a server with lots of user accounts, it's generally good to have a separate, large <filename>/home</filename> partition. In general, the partitioning situation varies from computer to computer depending on its uses." -msgstr "Legyen külön <filename>/usr/local</filename> partíció, ha sok program telepítését tervezed forrásból, melyek valószínűleg nem részei a Debian terjesztésnek. Ha a gép egy kívülről és elérhető levelező kiszolgáló, a <filename>/var/mail</filename> legyen külön partíció. A <filename>/tmp</filename> könyvtárat is gyakran külön partícióra teszik, 20–50MB erre jó ötlet lehet. Ha sok valódi felhasználói hozzáférés van, általában jó a <filename>/home</filename> partíciót külön venni. A legjobb partíciós séma gépről gépre eltér felhasználástól függően." +msgid "" +"You might need a separate <filename>/usr/local</filename> partition if you " +"plan to install many programs that are not part of the Debian distribution. " +"If your machine will be a mail server, you might need to make <filename>/var/" +"mail</filename> a separate partition. Often, putting <filename>/tmp</" +"filename> on its own partition, for instance 20–50MB, is a good idea. " +"If you are setting up a server with lots of user accounts, it's generally " +"good to have a separate, large <filename>/home</filename> partition. In " +"general, the partitioning situation varies from computer to computer " +"depending on its uses." +msgstr "" +"Legyen külön <filename>/usr/local</filename> partíció, ha sok program " +"telepítését tervezed forrásból, melyek valószínűleg nem részei a Debian " +"terjesztésnek. Ha a gép egy kívülről és elérhető levelező kiszolgáló, a " +"<filename>/var/mail</filename> legyen külön partíció. A <filename>/tmp</" +"filename> könyvtárat is gyakran külön partícióra teszik, 20–50MB erre " +"jó ötlet lehet. Ha sok valódi felhasználói hozzáférés van, általában jó a " +"<filename>/home</filename> partíciót külön venni. A legjobb partíciós séma " +"gépről gépre eltér felhasználástól függően." #. Tag: para #: partitioning.xml:252 #, no-c-format -msgid "For very complex systems, you should see the <ulink url=\"&url-multidisk-howto;\"> Multi Disk HOWTO</ulink>. This contains in-depth information, mostly of interest to ISPs and people setting up servers." -msgstr "A nagyon összetett rendszerekhez, lásd a <ulink url=\"&url-multidisk-howto;\"> címet. Ez mély leírást ad, melyet főleg az internet-szolgáltatók és kiszolgálók üzemeltetői hasznosítanak." +msgid "" +"For very complex systems, you should see the <ulink url=\"&url-multidisk-" +"howto;\"> Multi Disk HOWTO</ulink>. This contains in-depth information, " +"mostly of interest to ISPs and people setting up servers." +msgstr "" +"A nagyon összetett rendszerekhez, lásd a <ulink url=\"&url-multidisk-howto;" +"\"> címet. Ez mély leírást ad, melyet főleg az internet-szolgáltatók és " +"kiszolgálók üzemeltetői hasznosítanak." #. Tag: para #: partitioning.xml:259 #, no-c-format -msgid "With respect to the issue of swap partition size, there are many views. One rule of thumb which works well is to use as much swap as you have system memory. It also shouldn't be smaller than 16MB, in most cases. Of course, there are exceptions to these rules. If you are trying to solve 10000 simultaneous equations on a machine with 256MB of memory, you may need a gigabyte (or more) of swap." -msgstr "A csere-partíció méretéről több szempont van. Az egyik, mely jól működik, hogy legyen legalább annyi, mint memória. Általában ne legyen kisebb, mint 16MB. Természetesen van eltérés e szabályoktól. Például, ha 10000 párhuzamos egyenletet oldasz meg 256MB memóriával, 1 GB vagy több cserehely kell." +msgid "" +"With respect to the issue of swap partition size, there are many views. One " +"rule of thumb which works well is to use as much swap as you have system " +"memory. It also shouldn't be smaller than 16MB, in most cases. Of course, " +"there are exceptions to these rules. If you are trying to solve 10000 " +"simultaneous equations on a machine with 256MB of memory, you may need a " +"gigabyte (or more) of swap." +msgstr "" +"A csere-partíció méretéről több szempont van. Az egyik, mely jól működik, " +"hogy legyen legalább annyi, mint memória. Általában ne legyen kisebb, mint " +"16MB. Természetesen van eltérés e szabályoktól. Például, ha 10000 párhuzamos " +"egyenletet oldasz meg 256MB memóriával, 1 GB vagy több cserehely kell." #. Tag: para #: partitioning.xml:268 #, no-c-format -msgid "On the other hand, Atari Falcons and Macs feel pain when swapping, so instead of making a large swap partition, get as much RAM as possible." -msgstr "Az Atari Falcon vagy a Mac gépek nagyon cserehely-kezelése nagyon rossz, itt nincs más, mint annyi memóriát vásárolni, amennyit csak lehetséges." +msgid "" +"On the other hand, Atari Falcons and Macs feel pain when swapping, so " +"instead of making a large swap partition, get as much RAM as possible." +msgstr "" +"Az Atari Falcon vagy a Mac gépek nagyon cserehely-kezelése nagyon rossz, itt " +"nincs más, mint annyi memóriát vásárolni, amennyit csak lehetséges." #. Tag: para #: partitioning.xml:273 #, no-c-format -msgid "On 32-bit architectures (i386, m68k, 32-bit SPARC, and PowerPC), the maximum size of a swap partition is 2GB. That should be enough for nearly any installation. However, if your swap requirements are this high, you should probably try to spread the swap across different disks (also called <quote>spindles</quote>) and, if possible, different SCSI or IDE channels. The kernel will balance swap usage between multiple swap partitions, giving better performance." -msgstr "A 32-bites gépeken (i386, m68k, 32-bites SPARC és PowerPC) a csere-partíció legnagyobb mérete 2GB. Ez még a legkeményebb feladatokra is szinte mindig elég. De ha a csere-igényed ily magas érdemes több lemez (indák) közt elosztani, ha lehet, különböző SCSI vagy IDE csatornákon. A kernel kiegyenlíti a csere-használatot több csere-partíció közt, nagyobb teljesítményt nyújtva." +msgid "" +"On 32-bit architectures (i386, m68k, 32-bit SPARC, and PowerPC), the maximum " +"size of a swap partition is 2GB. That should be enough for nearly any " +"installation. However, if your swap requirements are this high, you should " +"probably try to spread the swap across different disks (also called " +"<quote>spindles</quote>) and, if possible, different SCSI or IDE channels. " +"The kernel will balance swap usage between multiple swap partitions, giving " +"better performance." +msgstr "" +"A 32-bites gépeken (i386, m68k, 32-bites SPARC és PowerPC) a csere-partíció " +"legnagyobb mérete 2GB. Ez még a legkeményebb feladatokra is szinte mindig " +"elég. De ha a csere-igényed ily magas érdemes több lemez (indák) közt " +"elosztani, ha lehet, különböző SCSI vagy IDE csatornákon. A kernel " +"kiegyenlíti a csere-használatot több csere-partíció közt, nagyobb " +"teljesítményt nyújtva." #. Tag: para #: partitioning.xml:283 #, no-c-format -msgid "As an example, an older home machine might have 32MB of RAM and a 1.7GB IDE drive on <filename>/dev/hda</filename>. There might be a 500MB partition for another operating system on <filename>/dev/hda1</filename>, a 32MB swap partition on <filename>/dev/hda3</filename> and about 1.2GB on <filename>/dev/hda2</filename> as the Linux partition." -msgstr "Íme egy régi otthoni gép 32MB memóriával és 1.7GB IDE meghajtóval a <filename>/dev/hda</filename> címen. Volt rajta egy 500MB méretű, másik operációs rendszert tartalmazó partíció a <filename>/dev/hda1</filename> címen és ezután a <filename>/dev/hda3</filename> címre került egy 32MB csere-partíció, és egy 1.2GB Linux partíció a <filename>/dev/hda2</filename> címre." +msgid "" +"As an example, an older home machine might have 32MB of RAM and a 1.7GB IDE " +"drive on <filename>/dev/hda</filename>. There might be a 500MB partition for " +"another operating system on <filename>/dev/hda1</filename>, a 32MB swap " +"partition on <filename>/dev/hda3</filename> and about 1.2GB on <filename>/" +"dev/hda2</filename> as the Linux partition." +msgstr "" +"Íme egy régi otthoni gép 32MB memóriával és 1.7GB IDE meghajtóval a " +"<filename>/dev/hda</filename> címen. Volt rajta egy 500MB méretű, másik " +"operációs rendszert tartalmazó partíció a <filename>/dev/hda1</filename> " +"címen és ezután a <filename>/dev/hda3</filename> címre került egy 32MB csere-" +"partíció, és egy 1.2GB Linux partíció a <filename>/dev/hda2</filename> címre." #. Tag: para #: partitioning.xml:292 #, no-c-format -msgid "For an idea of the space taken by tasks you might be interested in adding after your system installation is complete, check <xref linkend=\"tasksel-size-list\"/>." -msgstr "Az egyes feladatok által lefoglalt méretekről, melyek közül egyeseket valószínűleg hozzáadnál a rendszer telepítése után, lásd a <xref linkend=\"tasksel-size-list\"/> részt." +msgid "" +"For an idea of the space taken by tasks you might be interested in adding " +"after your system installation is complete, check <xref linkend=\"tasksel-" +"size-list\"/>." +msgstr "" +"Az egyes feladatok által lefoglalt méretekről, melyek közül egyeseket " +"valószínűleg hozzáadnál a rendszer telepítése után, lásd a <xref linkend=" +"\"tasksel-size-list\"/> részt." #. Tag: title #: partitioning.xml:308 @@ -381,8 +615,14 @@ msgstr "Eszköznevek Linuxban" #. Tag: para #: partitioning.xml:309 #, no-c-format -msgid "Linux disks and partition names may be different from other operating systems. You need to know the names that Linux uses when you create and mount partitions. Here's the basic naming scheme:" -msgstr "A Linuxban is megtalálható lemez és partíció nevek eltérhetnek bizonyos más operációs rendszerekétől. Ismerned kell az itt használt neveket, amikor partíciókat hozol létre és csatolsz. Itt az alap elnevezési rend:" +msgid "" +"Linux disks and partition names may be different from other operating " +"systems. You need to know the names that Linux uses when you create and " +"mount partitions. Here's the basic naming scheme:" +msgstr "" +"A Linuxban is megtalálható lemez és partíció nevek eltérhetnek bizonyos más " +"operációs rendszerekétől. Ismerned kell az itt használt neveket, amikor " +"partíciókat hozol létre és csatolsz. Itt az alap elnevezési rend:" #. Tag: para #: partitioning.xml:317 @@ -399,38 +639,70 @@ msgstr "Az 2. flopi meghajtó neve <filename>/dev/fd1</filename>." #. Tag: para #: partitioning.xml:327 #, no-c-format -msgid "The first SCSI disk (SCSI ID address-wise) is named <filename>/dev/sda</filename>." -msgstr "Az 1. SCSI lemez (SCSI ID cím-szintű) neve <filename>/dev/sda</filename>." +msgid "" +"The first SCSI disk (SCSI ID address-wise) is named <filename>/dev/sda</" +"filename>." +msgstr "" +"Az 1. SCSI lemez (SCSI ID cím-szintű) neve <filename>/dev/sda</filename>." #. Tag: para #: partitioning.xml:333 #, no-c-format -msgid "The second SCSI disk (address-wise) is named <filename>/dev/sdb</filename>, and so on." -msgstr "Az 2. SCSI lemez (SCSI ID cím-szintű) neve <filename>/dev/sdb</filename> és így tovább." +msgid "" +"The second SCSI disk (address-wise) is named <filename>/dev/sdb</filename>, " +"and so on." +msgstr "" +"Az 2. SCSI lemez (SCSI ID cím-szintű) neve <filename>/dev/sdb</filename> és " +"így tovább." #. Tag: para #: partitioning.xml:339 #, no-c-format -msgid "The first SCSI CD-ROM is named <filename>/dev/scd0</filename>, also known as <filename>/dev/sr0</filename>." -msgstr "Az 1. SCSI CS-ROM neve <filename>/dev/scd0</filename>, <filename>/dev/sr0</filename> névvel is ismert." +msgid "" +"The first SCSI CD-ROM is named <filename>/dev/scd0</filename>, also known as " +"<filename>/dev/sr0</filename>." +msgstr "" +"Az 1. SCSI CS-ROM neve <filename>/dev/scd0</filename>, <filename>/dev/sr0</" +"filename> névvel is ismert." #. Tag: para #: partitioning.xml:345 #, no-c-format -msgid "The master disk on IDE primary controller is named <filename>/dev/hda</filename>." -msgstr "Az elsődleges IDE vezérlőn lévő mester (master) lemez neve <filename>/dev/hda</filename>." +msgid "" +"The master disk on IDE primary controller is named <filename>/dev/hda</" +"filename>." +msgstr "" +"Az elsődleges IDE vezérlőn lévő mester (master) lemez neve <filename>/dev/" +"hda</filename>." #. Tag: para #: partitioning.xml:351 #, no-c-format -msgid "The slave disk on IDE primary controller is named <filename>/dev/hdb</filename>." -msgstr "Az elsődleges IDE vezérlőn lévő szolga (slave) lemez neve <filename>/dev/hdb</filename>." +msgid "" +"The slave disk on IDE primary controller is named <filename>/dev/hdb</" +"filename>." +msgstr "" +"Az elsődleges IDE vezérlőn lévő szolga (slave) lemez neve <filename>/dev/" +"hdb</filename>." #. Tag: para #: partitioning.xml:357 #, no-c-format -msgid "The master and slave disks of the secondary controller can be called <filename>/dev/hdc</filename> and <filename>/dev/hdd</filename>, respectively. Newer IDE controllers can actually have two channels, effectively acting like two controllers. <phrase arch=\"m68k\"> The letters may differ from what shows in the mac program pdisk (i.e. what shows up as <filename>/dev/hdc</filename> on pdisk may show up as <filename>/dev/hda</filename> in Debian). </phrase>" -msgstr "A másodlagos vezérlő mester (master) és szolga (slave) lemezei neve <filename>/dev/hdc</filename> és <filename>/dev/hdd</filename>. Az újabb IDE vezérlők 2 csatornásak, ezek módjára működnek. <phrase arch=\"m68k\"> A betűk eltérhetnek a pdisk által mutatottól (például, amit talán a pdisk mint <filename>/dev/hdc</filename> mutat, a Debian rendszerben <filename>/dev/hda</filename> lehet). </phrase>" +msgid "" +"The master and slave disks of the secondary controller can be called " +"<filename>/dev/hdc</filename> and <filename>/dev/hdd</filename>, " +"respectively. Newer IDE controllers can actually have two channels, " +"effectively acting like two controllers. <phrase arch=\"m68k\"> The letters " +"may differ from what shows in the mac program pdisk (i.e. what shows up as " +"<filename>/dev/hdc</filename> on pdisk may show up as <filename>/dev/hda</" +"filename> in Debian). </phrase>" +msgstr "" +"A másodlagos vezérlő mester (master) és szolga (slave) lemezei neve " +"<filename>/dev/hdc</filename> és <filename>/dev/hdd</filename>. Az újabb IDE " +"vezérlők 2 csatornásak, ezek módjára működnek. <phrase arch=\"m68k\"> A " +"betűk eltérhetnek a pdisk által mutatottól (például, amit talán a pdisk mint " +"<filename>/dev/hdc</filename> mutat, a Debian rendszerben <filename>/dev/" +"hda</filename> lehet). </phrase>" #. Tag: para #: partitioning.xml:372 @@ -447,8 +719,12 @@ msgstr "Az 2. XT lemez neve <filename>/dev/xda</filename>." #. Tag: para #: partitioning.xml:382 #, no-c-format -msgid "The first ACSI device is named <filename>/dev/ada</filename>, the second is named <filename>/dev/adb</filename>." -msgstr "Az 1. ACSI eszköz neve <filename>/dev/ada</filename>, a 2. neve <filename>/dev/adb</filename>." +msgid "" +"The first ACSI device is named <filename>/dev/ada</filename>, the second is " +"named <filename>/dev/adb</filename>." +msgstr "" +"Az 1. ACSI eszköz neve <filename>/dev/ada</filename>, a 2. neve <filename>/" +"dev/adb</filename>." #. Tag: para #: partitioning.xml:391 @@ -459,50 +735,114 @@ msgstr "Az 1. DASD eszköz neve <filename>/dev/dasda</filename>." #. Tag: para #: partitioning.xml:397 #, no-c-format -msgid "The second DASD device is named <filename>/dev/dasdb</filename>, and so on." +msgid "" +"The second DASD device is named <filename>/dev/dasdb</filename>, and so on." msgstr "Az 2. DASD eszköz neve <filename>/dev/dasdb</filename> és így tovább." #. Tag: para #: partitioning.xml:405 #, no-c-format -msgid "The partitions on each disk are represented by appending a decimal number to the disk name: <filename>sda1</filename> and <filename>sda2</filename> represent the first and second partitions of the first SCSI disk drive in your system." -msgstr "Az egyes lemezek partíciói egy a lemez nevéhez fűzött tízes számrendszerbeli számmal ábrázoltak: az <filename>sda1</filename> és <filename>sda2</filename> a rendszer 1. SCSI lemez-meghajtója 1. és 2. partícióját adják." +msgid "" +"The partitions on each disk are represented by appending a decimal number to " +"the disk name: <filename>sda1</filename> and <filename>sda2</filename> " +"represent the first and second partitions of the first SCSI disk drive in " +"your system." +msgstr "" +"Az egyes lemezek partíciói egy a lemez nevéhez fűzött tízes számrendszerbeli " +"számmal ábrázoltak: az <filename>sda1</filename> és <filename>sda2</" +"filename> a rendszer 1. SCSI lemez-meghajtója 1. és 2. partícióját adják." #. Tag: para #: partitioning.xml:412 #, no-c-format -msgid "Here is a real-life example. Let's assume you have a system with 2 SCSI disks, one at SCSI address 2 and the other at SCSI address 4. The first disk (at address 2) is then named <filename>sda</filename>, and the second <filename>sdb</filename>. If the <filename>sda</filename> drive has 3 partitions on it, these will be named <filename>sda1</filename>, <filename>sda2</filename>, and <filename>sda3</filename>. The same applies to the <filename>sdb</filename> disk and its partitions." -msgstr "Itt egy valós példa. Tegyük fel, hogy van egy rendszer 2 SCSI lemezzel, az egyik a kettes, a másik a négyes SCSI címen. Az első lemez (a kettes címen) neve <filename>sda</filename>, a másodiké <filename>sdb</filename>. Ha az <filename>sda</filename> meghajtónak 3 partíciója van, neveik <filename>sda1</filename>, <filename>sda2</filename> és <filename>sda3</filename>. Hasonlóan alakul az <filename>sdb</filename> lemez és partíciói." +msgid "" +"Here is a real-life example. Let's assume you have a system with 2 SCSI " +"disks, one at SCSI address 2 and the other at SCSI address 4. The first disk " +"(at address 2) is then named <filename>sda</filename>, and the second " +"<filename>sdb</filename>. If the <filename>sda</filename> drive has 3 " +"partitions on it, these will be named <filename>sda1</filename>, " +"<filename>sda2</filename>, and <filename>sda3</filename>. The same applies " +"to the <filename>sdb</filename> disk and its partitions." +msgstr "" +"Itt egy valós példa. Tegyük fel, hogy van egy rendszer 2 SCSI lemezzel, az " +"egyik a kettes, a másik a négyes SCSI címen. Az első lemez (a kettes címen) " +"neve <filename>sda</filename>, a másodiké <filename>sdb</filename>. Ha az " +"<filename>sda</filename> meghajtónak 3 partíciója van, neveik " +"<filename>sda1</filename>, <filename>sda2</filename> és <filename>sda3</" +"filename>. Hasonlóan alakul az <filename>sdb</filename> lemez és partíciói." #. Tag: para #: partitioning.xml:423 #, no-c-format -msgid "Note that if you have two SCSI host bus adapters (i.e., controllers), the order of the drives can get confusing. The best solution in this case is to watch the boot messages, assuming you know the drive models and/or capacities." -msgstr "Figyelj, ha 2 SCSI gazda busz adaptered (vezérlőd) van, a meghajtók sorrendje zavarba ejthet. A meghajtók modellje és/vagy kapacitása ismeretében az indító üzenetek mindent elárulnak." +msgid "" +"Note that if you have two SCSI host bus adapters (i.e., controllers), the " +"order of the drives can get confusing. The best solution in this case is to " +"watch the boot messages, assuming you know the drive models and/or " +"capacities." +msgstr "" +"Figyelj, ha 2 SCSI gazda busz adaptered (vezérlőd) van, a meghajtók " +"sorrendje zavarba ejthet. A meghajtók modellje és/vagy kapacitása " +"ismeretében az indító üzenetek mindent elárulnak." #. Tag: para #: partitioning.xml:430 #, no-c-format -msgid "Linux represents the primary partitions as the drive name, plus the numbers 1 through 4. For example, the first primary partition on the first IDE drive is <filename>/dev/hda1</filename>. The logical partitions are numbered starting at 5, so the first logical partition on that same drive is <filename>/dev/hda5</filename>. Remember that the extended partition, that is, the primary partition holding the logical partitions, is not usable by itself. This applies to SCSI disks as well as IDE disks." -msgstr "A Linux az elsődleges partíciókat a meghajtó nevével és 1 és 4 közti számokkal jelzi. Például az 1. elsődleges partíció az 1. IDE meghajtón a <filename>/dev/hda1</filename>. 5 az indító értéke a logikai partícióknak számának, így az 1. logikai partíció e meghajtón a <filename>/dev/hda5</filename>. Ne feledd, a kiterjesztett partíció, a logikai partíciókat tároló elsődleges partíció, nem használható magában. Ez a SCSI és IDE lemezekre is áll." +msgid "" +"Linux represents the primary partitions as the drive name, plus the numbers " +"1 through 4. For example, the first primary partition on the first IDE drive " +"is <filename>/dev/hda1</filename>. The logical partitions are numbered " +"starting at 5, so the first logical partition on that same drive is " +"<filename>/dev/hda5</filename>. Remember that the extended partition, that " +"is, the primary partition holding the logical partitions, is not usable by " +"itself. This applies to SCSI disks as well as IDE disks." +msgstr "" +"A Linux az elsődleges partíciókat a meghajtó nevével és 1 és 4 közti " +"számokkal jelzi. Például az 1. elsődleges partíció az 1. IDE meghajtón a " +"<filename>/dev/hda1</filename>. 5 az indító értéke a logikai partícióknak " +"számának, így az 1. logikai partíció e meghajtón a <filename>/dev/hda5</" +"filename>. Ne feledd, a kiterjesztett partíció, a logikai partíciókat tároló " +"elsődleges partíció, nem használható magában. Ez a SCSI és IDE lemezekre is " +"áll." #. Tag: para #: partitioning.xml:441 #, no-c-format -msgid "VMEbus systems using the TEAC FC-1 SCSI floppy drive will see it as normal SCSI disk. To make identification of the drive simpler the installation software will create a symbolic link to the appropriate device and name it <filename>/dev/sfd0</filename>." -msgstr "A TEAC FC-1 SCSI flopi meghajtót használó VMEbus rendszerek azt normál SCSI lemeznek látják. Az egyszerűbb azonosításért a telepítő létrehoz egy jelképes láncot a megfelelő eszközhöz és elnevezi így: <filename>/dev/sfd0</filename>." +msgid "" +"VMEbus systems using the TEAC FC-1 SCSI floppy drive will see it as normal " +"SCSI disk. To make identification of the drive simpler the installation " +"software will create a symbolic link to the appropriate device and name it " +"<filename>/dev/sfd0</filename>." +msgstr "" +"A TEAC FC-1 SCSI flopi meghajtót használó VMEbus rendszerek azt normál SCSI " +"lemeznek látják. Az egyszerűbb azonosításért a telepítő létrehoz egy " +"jelképes láncot a megfelelő eszközhöz és elnevezi így: <filename>/dev/sfd0</" +"filename>." #. Tag: para #: partitioning.xml:448 #, no-c-format -msgid "Sun disk partitions allow for 8 separate partitions (or slices). The third partition is usually (and is preferred to have) the <quote>Whole Disk</quote> partition. This partition references all of the sectors of the disk, and is used by the boot loader (either SILO, or Sun's)." -msgstr "8 Sun lemez-partíció (szelet) lehet. A 3. általában (és ajánlottan) az <quote>Egész lemez</quote> partíció. E partíció a lemez összes szektorára hivatkozik és a boot betöltő használja (akár a SILO akár a Sun-é)." +msgid "" +"Sun disk partitions allow for 8 separate partitions (or slices). The third " +"partition is usually (and is preferred to have) the <quote>Whole Disk</" +"quote> partition. This partition references all of the sectors of the disk, " +"and is used by the boot loader (either SILO, or Sun's)." +msgstr "" +"8 Sun lemez-partíció (szelet) lehet. A 3. általában (és ajánlottan) az " +"<quote>Egész lemez</quote> partíció. E partíció a lemez összes szektorára " +"hivatkozik és a boot betöltő használja (akár a SILO akár a Sun-é)." #. Tag: para #: partitioning.xml:455 #, no-c-format -msgid "The partitions on each disk are represented by appending a decimal number to the disk name: <filename>dasda1</filename> and <filename>dasda2</filename> represent the first and second partitions of the first DASD device in your system." -msgstr "Az egyes lemezek partíciói egy a lemez nevéhez fűzött tízes számrendszerbeli számmal ábrázoltak: a <filename>dasda1</filename> és <filename>dasda2</filename> a rendszer 1. DASD eszköze 1. és 2. partícióját adják." +msgid "" +"The partitions on each disk are represented by appending a decimal number to " +"the disk name: <filename>dasda1</filename> and <filename>dasda2</filename> " +"represent the first and second partitions of the first DASD device in your " +"system." +msgstr "" +"Az egyes lemezek partíciói egy a lemez nevéhez fűzött tízes számrendszerbeli " +"számmal ábrázoltak: a <filename>dasda1</filename> és <filename>dasda2</" +"filename> a rendszer 1. DASD eszköze 1. és 2. partícióját adják." #. Tag: title #: partitioning.xml:470 @@ -513,8 +853,15 @@ msgstr "Debian particionáló programok" #. Tag: para #: partitioning.xml:471 #, no-c-format -msgid "Several varieties of partitioning programs have been adapted by Debian developers to work on various types of hard disks and computer architectures. Following is a list of the program(s) applicable for your architecture." -msgstr "A Debian fejlesztők számos particionáló programot alkalmaztak a különbözé merevlemezekhez és számítógép architektúrákhoz. Itt az architektúrádhoz illő programok sora." +msgid "" +"Several varieties of partitioning programs have been adapted by Debian " +"developers to work on various types of hard disks and computer " +"architectures. Following is a list of the program(s) applicable for your " +"architecture." +msgstr "" +"A Debian fejlesztők számos particionáló programot alkalmaztak a különbözé " +"merevlemezekhez és számítógép architektúrákhoz. Itt az architektúrádhoz illő " +"programok sora." #. Tag: command #: partitioning.xml:483 @@ -525,8 +872,15 @@ msgstr "partman" #. Tag: para #: partitioning.xml:484 #, no-c-format -msgid "Recommended partitioning tool in Debian. This Swiss army knife can also resize partitions, create filesystems <phrase arch=\"x86\"> (<quote>format</quote> in Windows speak)</phrase> and assign them to the mountpoints." -msgstr "A Debian rendszer ajánlott particionáló eszköze. Ez a svájci bicska átméretez partíciókat, létrehoz fájlrendszereket <phrase arch=\"x86\"> (<quote>formáz</quote> a windowsos-nyelvűeknél)</phrase> és csatolási pontokhoz rendeli őket." +msgid "" +"Recommended partitioning tool in Debian. This Swiss army knife can also " +"resize partitions, create filesystems <phrase arch=\"x86\"> (<quote>format</" +"quote> in Windows speak)</phrase> and assign them to the mountpoints." +msgstr "" +"A Debian rendszer ajánlott particionáló eszköze. Ez a svájci bicska " +"átméretez partíciókat, létrehoz fájlrendszereket <phrase arch=\"x86\"> " +"(<quote>formáz</quote> a windowsos-nyelvűeknél)</phrase> és csatolási " +"pontokhoz rendeli őket." #. Tag: command #: partitioning.xml:495 @@ -543,8 +897,17 @@ msgstr "Az eredeti Linux lemez-particionáló, tapasztaltaknak könnyű." #. Tag: para #: partitioning.xml:500 #, no-c-format -msgid "Be careful if you have existing FreeBSD partitions on your machine. The installation kernels include support for these partitions, but the way that <command>fdisk</command> represents them (or not) can make the device names differ. See the <ulink url=\"&url-linux-freebsd;\">Linux+FreeBSD HOWTO</ulink>." -msgstr "Légy óvatos, ha FreeBSD partícióid vannak. A telepítő kernelek támogatják ezeket, de a mód miatt, ahogy az <command>fdisk</command> megjeleníti (vagy nem) ezeket az eszközök nevei eltérhetnek. Lásd a <ulink url=\"&url-linux-freebsd;\">Linux+FreeBSD HOGYAN</ulink> leírást." +msgid "" +"Be careful if you have existing FreeBSD partitions on your machine. The " +"installation kernels include support for these partitions, but the way that " +"<command>fdisk</command> represents them (or not) can make the device names " +"differ. See the <ulink url=\"&url-linux-freebsd;\">Linux+FreeBSD HOWTO</" +"ulink>." +msgstr "" +"Légy óvatos, ha FreeBSD partícióid vannak. A telepítő kernelek támogatják " +"ezeket, de a mód miatt, ahogy az <command>fdisk</command> megjeleníti (vagy " +"nem) ezeket az eszközök nevei eltérhetnek. Lásd a <ulink url=\"&url-linux-" +"freebsd;\">Linux+FreeBSD HOGYAN</ulink> leírást." #. Tag: command #: partitioning.xml:512 @@ -561,8 +924,12 @@ msgstr "Könnyen használható, teljes-képernyős lemez particionáló sokunkna #. Tag: para #: partitioning.xml:517 #, no-c-format -msgid "Note that <command>cfdisk</command> doesn't understand FreeBSD partitions at all, and, again, device names may differ as a result." -msgstr "Tudni kell, hogy a <command>cfdisk</command> egyáltalán nem érti a FreeBSD partíciókat, és újra, az eszközök nevei eltérhetnek emiatt." +msgid "" +"Note that <command>cfdisk</command> doesn't understand FreeBSD partitions at " +"all, and, again, device names may differ as a result." +msgstr "" +"Tudni kell, hogy a <command>cfdisk</command> egyáltalán nem érti a FreeBSD " +"partíciókat, és újra, az eszközök nevei eltérhetnek emiatt." #. Tag: command #: partitioning.xml:526 @@ -609,8 +976,12 @@ msgstr "pmac-fdisk" #. Tag: para #: partitioning.xml:554 #, no-c-format -msgid "PowerMac-aware version of <command>fdisk</command>, also used by BVM and Motorola VMEbus systems." -msgstr "Az <command>fdisk</command> PowerMac verziója, a BVM és Motorola VMEbus rendszerek is használják." +msgid "" +"PowerMac-aware version of <command>fdisk</command>, also used by BVM and " +"Motorola VMEbus systems." +msgstr "" +"Az <command>fdisk</command> PowerMac verziója, a BVM és Motorola VMEbus " +"rendszerek is használják." #. Tag: command #: partitioning.xml:563 @@ -621,56 +992,95 @@ msgstr "fdasd" #. Tag: para #: partitioning.xml:564 #, no-c-format -msgid "&arch-title; version of <command>fdisk</command>; Please read the fdasd manual page or chapter 13 in <ulink url=\"http://oss.software.ibm.com/developerworks/opensource/linux390/docu/l390dd08.pdf\"> Device Drivers and Installation Commands</ulink> for details." -msgstr "Az <command>fdisk</command> &arch-title; verziója; olvasd el az <ulink url=\"http://oss.software.ibm.com/developerworks/opensource/linux390/docu/l390dd08.pdf\"> Eszközmeghajtók és telepítő parancsok</ulink> 13. fejezetét vagy az fdasd kézikönyv oldalt a részletekért." +msgid "" +"&arch-title; version of <command>fdisk</command>; Please read the fdasd " +"manual page or chapter 13 in <ulink url=\"http://oss.software.ibm.com/" +"developerworks/opensource/linux390/docu/l390dd08.pdf\"> Device Drivers and " +"Installation Commands</ulink> for details." +msgstr "" +"Az <command>fdisk</command> &arch-title; verziója; olvasd el az <ulink url=" +"\"http://oss.software.ibm.com/developerworks/opensource/linux390/docu/" +"l390dd08.pdf\"> Eszközmeghajtók és telepítő parancsok</ulink> 13. fejezetét " +"vagy az fdasd kézikönyv oldalt a részletekért." #. Tag: para #: partitioning.xml:575 #, no-c-format -msgid "One of these programs will be run by default when you select <guimenuitem>Partition disks</guimenuitem> (or similar). It may be possible to use a different partitioning tool from the command line on VT2, but this is not recommended." -msgstr "E programok egyike indul a <guimenuitem>Lemezek particionálása</guimenuitem> (vagy hasonló) választásakor. Más particionáló eszköz is használható a VT2 által adott parancssorban, de ez nem ajánlott." +msgid "" +"One of these programs will be run by default when you select " +"<guimenuitem>Partition disks</guimenuitem> (or similar). It may be possible " +"to use a different partitioning tool from the command line on VT2, but this " +"is not recommended." +msgstr "" +"E programok egyike indul a <guimenuitem>Lemezek particionálása</guimenuitem> " +"(vagy hasonló) választásakor. Más particionáló eszköz is használható a VT2 " +"által adott parancssorban, de ez nem ajánlott." #. Tag: para #: partitioning.xml:582 #, no-c-format msgid "" -"If you will be working with more than 20 partitions on your ide disk, you will need to create devices for partitions 21 and beyond. The next step of initializing the partition will fail unless a proper device is present. As an example, here are commands you can use in <userinput>tty2</userinput> or under <guimenuitem>Execute a shell</guimenuitem> to add a device so the 21st partition can be initialized: <informalexample><screen>\n" +"If you will be working with more than 20 partitions on your ide disk, you " +"will need to create devices for partitions 21 and beyond. The next step of " +"initializing the partition will fail unless a proper device is present. As " +"an example, here are commands you can use in <userinput>tty2</userinput> or " +"under <guimenuitem>Execute a shell</guimenuitem> to add a device so the 21st " +"partition can be initialized: <informalexample><screen>\n" "# cd /dev\n" "# mknod hda21 b 3 21\n" "# chgrp disk hda21\n" "# chmod 660 hda21\n" -"</screen></informalexample> Booting into the new system will fail unless proper devices are present on the target system. After installing the kernel and modules, execute: <informalexample><screen>\n" +"</screen></informalexample> Booting into the new system will fail unless " +"proper devices are present on the target system. After installing the kernel " +"and modules, execute: <informalexample><screen>\n" "# cd /target/dev\n" "# mknod hda21 b 3 21\n" "# chgrp disk hda21\n" "# chmod 660 hda21\n" -"</screen></informalexample> <phrase arch=\"x86\">Remember to mark your boot partition as <quote>Bootable</quote>.</phrase>" +"</screen></informalexample> <phrase arch=\"x86\">Remember to mark your boot " +"partition as <quote>Bootable</quote>.</phrase>" msgstr "" -"Ha több, mint 20 partícióval dolgozol ide lemezeden, a 21. és további partíciókat létre kell hoznod. A partíciók inicializálásának következő lépése sikertelen lesz, ha a megfelelő eszköz nincs jelen. Példaként íme pár a <userinput>tty2</userinput> vagy a <guimenuitem>Héj futtatása</guimenuitem> alól használható parancs egy eszköz hozzáadásához, mellyel a 21. partíció inicializálható lesz: <informalexample><screen>\n" +"Ha több, mint 20 partícióval dolgozol ide lemezeden, a 21. és további " +"partíciókat létre kell hoznod. A partíciók inicializálásának következő " +"lépése sikertelen lesz, ha a megfelelő eszköz nincs jelen. Példaként íme pár " +"a <userinput>tty2</userinput> vagy a <guimenuitem>Héj futtatása</" +"guimenuitem> alól használható parancs egy eszköz hozzáadásához, mellyel a " +"21. partíció inicializálható lesz: <informalexample><screen>\n" "# cd /dev\n" "# mknod hda21 b 3 21\n" "# chgrp disk hda21\n" "# chmod 660 hda21\n" -"</screen></informalexample> Az új rendszer indítása meghiúsul, míg a helyes eszközök nincsenek a cél-rendszeren. A kernel és modulok telepítése után futtasd ezt: <informalexample><screen>\n" +"</screen></informalexample> Az új rendszer indítása meghiúsul, míg a helyes " +"eszközök nincsenek a cél-rendszeren. A kernel és modulok telepítése után " +"futtasd ezt: <informalexample><screen>\n" "# cd /target/dev\n" "# mknod hda21 b 3 21\n" "# chgrp disk hda21\n" "# chmod 660 hda21\n" -"</screen></informalexample> <phrase arch=\"x86\">Szüksége lehet az indító partíció megjelölése mint <quote>Indítható/Bootable)</quote>.</phrase>" +"</screen></informalexample> <phrase arch=\"x86\">Szüksége lehet az indító " +"partíció megjelölése mint <quote>Indítható/Bootable)</quote>.</phrase>" #. Tag: para #: partitioning.xml:601 #, no-c-format -msgid "One key point when partitioning for Mac type disks is that the swap partition is identified by its name; it must be named <quote>swap</quote>. All Mac linux partitions are the same partition type, Apple_UNIX_SRV2. Please read the fine manual. We also suggest reading the <ulink url=\"&url-mac-fdisk-tutorial;\">mac-fdisk Tutorial</ulink>, which includes steps you should take if you are sharing your disk with MacOS." -msgstr "A Mac típusú lemezek particionálásakor fontos, hogy a csere partíció neve alapján kerül azonosításra; <quote>swap</quote> nevet kell neki adni. Minden Mac linux partíció típusa azonos, Apple_UNIX_SRV2. Olvasd el a kézikönyvet. A <ulink url=\"&url-mac-fdisk-tutorial;\">mac-fdisk Tutorial</ulink> elolvasását is ajánljuk, mely szükséges lépéseket tartalmaz, ha a lemezeden a Debian mellett MacOS is lenne." +msgid "" +"One key point when partitioning for Mac type disks is that the swap " +"partition is identified by its name; it must be named <quote>swap</quote>. " +"All Mac linux partitions are the same partition type, Apple_UNIX_SRV2. " +"Please read the fine manual. We also suggest reading the <ulink url=\"&url-" +"mac-fdisk-tutorial;\">mac-fdisk Tutorial</ulink>, which includes steps you " +"should take if you are sharing your disk with MacOS." +msgstr "" +"A Mac típusú lemezek particionálásakor fontos, hogy a csere partíció neve " +"alapján kerül azonosításra; <quote>swap</quote> nevet kell neki adni. Minden " +"Mac linux partíció típusa azonos, Apple_UNIX_SRV2. Olvasd el a kézikönyvet. " +"A <ulink url=\"&url-mac-fdisk-tutorial;\">mac-fdisk Tutorial</ulink> " +"elolvasását is ajánljuk, mely szükséges lépéseket tartalmaz, ha a lemezeden " +"a Debian mellett MacOS is lenne." #. Tag: title -#: partitioning.xml:617 -#: partitioning.xml:678 -#: partitioning.xml:702 -#: partitioning.xml:799 -#: partitioning.xml:913 -#: partitioning.xml:990 +#: partitioning.xml:617 partitioning.xml:678 partitioning.xml:702 +#: partitioning.xml:799 partitioning.xml:913 partitioning.xml:990 #, no-c-format msgid "Partitioning for &arch-title;" msgstr "Particionálás &arch-title; gépen" @@ -678,91 +1088,270 @@ msgstr "Particionálás &arch-title; gépen" #. Tag: para #: partitioning.xml:618 #, no-c-format -msgid "Booting Debian from the SRM console (the only disk boot method supported by &releasename;) requires you to have a BSD disk label, not a DOS partition table, on your boot disk. (Remember, the SRM boot block is incompatible with MS-DOS partition tables — see <xref linkend=\"alpha-firmware\"/>.) As a result, <command>partman</command> creates BSD disk labels when running on &architecture;, but if your disk has an existing DOS partition table the existing partitions will need to be deleted before <command>partman</command> can convert it to use a disk label." -msgstr "A Debian SRM konzolról indítása (&releasename; által egyedül támogatott lemezről indító módszer) BSD lemez címkét igényel, nem DOS partíciós táblát az indító lemezen. (Az SRM indító blokk inkompatibilis az MS-DOS partíciós táblával — lásd e leírást: <xref linkend=\"alpha-firmware\"/>.) Ezért a <command>partman</command> BSD lemez címkéket hoz létre &architecture; architektúrán, ha a lemezen DOS partíciós tábla van, a létező partíciókat törölni kell, mielőtt a <command>partman</command> egy lemez címke használatára tudja alakítani." +msgid "" +"Booting Debian from the SRM console (the only disk boot method supported by " +"&releasename;) requires you to have a BSD disk label, not a DOS partition " +"table, on your boot disk. (Remember, the SRM boot block is incompatible with " +"MS-DOS partition tables — see <xref linkend=\"alpha-firmware\"/>.) As " +"a result, <command>partman</command> creates BSD disk labels when running on " +"&architecture;, but if your disk has an existing DOS partition table the " +"existing partitions will need to be deleted before <command>partman</" +"command> can convert it to use a disk label." +msgstr "" +"A Debian SRM konzolról indítása (&releasename; által egyedül támogatott " +"lemezről indító módszer) BSD lemez címkét igényel, nem DOS partíciós táblát " +"az indító lemezen. (Az SRM indító blokk inkompatibilis az MS-DOS partíciós " +"táblával — lásd e leírást: <xref linkend=\"alpha-firmware\"/>.) Ezért " +"a <command>partman</command> BSD lemez címkéket hoz létre &architecture; " +"architektúrán, ha a lemezen DOS partíciós tábla van, a létező partíciókat " +"törölni kell, mielőtt a <command>partman</command> egy lemez címke " +"használatára tudja alakítani." #. Tag: para #: partitioning.xml:629 #, no-c-format -msgid "If you have chosen to use <command>fdisk</command> to partition your disk, and the disk that you have selected for partitioning does not already contain a BSD disk label, you must use the <quote>b</quote> command to enter disk label mode." -msgstr "Ha az <command>fdisk</command> segítségével particionálsz és a particionálásra jelölt lemez még nem tartalmaz BSD lemez címkét, a <quote>b</quote> parancsot kell lemez címke módba lépéshez használnod." +msgid "" +"If you have chosen to use <command>fdisk</command> to partition your disk, " +"and the disk that you have selected for partitioning does not already " +"contain a BSD disk label, you must use the <quote>b</quote> command to enter " +"disk label mode." +msgstr "" +"Ha az <command>fdisk</command> segítségével particionálsz és a " +"particionálásra jelölt lemez még nem tartalmaz BSD lemez címkét, a <quote>b</" +"quote> parancsot kell lemez címke módba lépéshez használnod." #. Tag: para #: partitioning.xml:636 #, no-c-format -msgid "Unless you wish to use the disk you are partitioning from Tru64 Unix or one of the free 4.4BSD-Lite derived operating systems (FreeBSD, OpenBSD, or NetBSD), you should <emphasis>not</emphasis> create the third partition as a <quote>whole disk</quote> partition (i.e. with start and end sectors to span the whole disk), as this renders the disk incompatible with the tools used to make it bootable with aboot. This means that the disk configured by the installer for use as the Debian boot disk will be inaccessible to the operating systems mentioned earlier." +msgid "" +"Unless you wish to use the disk you are partitioning from Tru64 Unix or one " +"of the free 4.4BSD-Lite derived operating systems (FreeBSD, OpenBSD, or " +"NetBSD), you should <emphasis>not</emphasis> create the third partition as a " +"<quote>whole disk</quote> partition (i.e. with start and end sectors to span " +"the whole disk), as this renders the disk incompatible with the tools used " +"to make it bootable with aboot. This means that the disk configured by the " +"installer for use as the Debian boot disk will be inaccessible to the " +"operating systems mentioned earlier." msgstr "" #. Tag: para #: partitioning.xml:648 #, no-c-format -msgid "Also, because <command>aboot</command> is written to the first few sectors of the disk (currently it occupies about 70 kilobytes, or 150 sectors), you <emphasis>must</emphasis> leave enough empty space at the beginning of the disk for it. In the past, it was suggested that you make a small partition at the beginning of the disk, to be left unformatted. For the same reason mentioned above, we now suggest that you do not do this on disks that will only be used by GNU/Linux. When using <command>partman</command>, a small partition will still be created for <command>aboot</command> for convenience reasons." +msgid "" +"Also, because <command>aboot</command> is written to the first few sectors " +"of the disk (currently it occupies about 70 kilobytes, or 150 sectors), you " +"<emphasis>must</emphasis> leave enough empty space at the beginning of the " +"disk for it. In the past, it was suggested that you make a small partition " +"at the beginning of the disk, to be left unformatted. For the same reason " +"mentioned above, we now suggest that you do not do this on disks that will " +"only be used by GNU/Linux. When using <command>partman</command>, a small " +"partition will still be created for <command>aboot</command> for convenience " +"reasons." msgstr "" #. Tag: para #: partitioning.xml:660 #, no-c-format -msgid "For ARC installations, you should make a small FAT partition at the beginning of the disk to contain <command>MILO</command> and <command>linload.exe</command> — 5 megabytes should be sufficient, see <xref linkend=\"non-debian-partitioning\"/>. Unfortunately, making FAT file systems from the menu is not yet supported, so you'll have to do it manually from the shell using <command>mkdosfs</command> before attempting to install the boot loader." +msgid "" +"For ARC installations, you should make a small FAT partition at the " +"beginning of the disk to contain <command>MILO</command> and " +"<command>linload.exe</command> — 5 megabytes should be sufficient, see " +"<xref linkend=\"non-debian-partitioning\"/>. Unfortunately, making FAT file " +"systems from the menu is not yet supported, so you'll have to do it manually " +"from the shell using <command>mkdosfs</command> before attempting to install " +"the boot loader." msgstr "" #. Tag: para #: partitioning.xml:679 #, no-c-format -msgid "PALO, the HPPA boot loader, requires a partition of type <quote>F0</quote> somewhere in the first 2GB. This is where the boot loader and an optional kernel and RAMdisk will be stored, so make it big enough for that — at least 4Mb (I like 8–16MB). An additional requirement of the firmware is that the Linux kernel must reside within the first 2GB of the disk. This is typically achieved by making the root ext2 partition fit entirely within the first 2GB of the disk. Alternatively you can create a small ext2 partition near the start of the disk and mount that on <filename>/boot</filename>, since that is the directory where the Linux kernel(s) will be stored. <filename>/boot</filename> needs to be big enough to hold whatever kernels (and backups) you might wish to load; 25–50MB is generally sufficient." +msgid "" +"PALO, the HPPA boot loader, requires a partition of type <quote>F0</quote> " +"somewhere in the first 2GB. This is where the boot loader and an optional " +"kernel and RAMdisk will be stored, so make it big enough for that — at " +"least 4Mb (I like 8–16MB). An additional requirement of the firmware " +"is that the Linux kernel must reside within the first 2GB of the disk. This " +"is typically achieved by making the root ext2 partition fit entirely within " +"the first 2GB of the disk. Alternatively you can create a small ext2 " +"partition near the start of the disk and mount that on <filename>/boot</" +"filename>, since that is the directory where the Linux kernel(s) will be " +"stored. <filename>/boot</filename> needs to be big enough to hold whatever " +"kernels (and backups) you might wish to load; 25–50MB is generally " +"sufficient." msgstr "" #. Tag: para #: partitioning.xml:703 #, no-c-format -msgid "If you have an existing other operating system such as DOS or Windows and you want to preserve that operating system while installing Debian, you may need to resize its partition to free up space for the Debian installation. The installer supports resizing of both FAT and NTFS filesystems; when you get to the installer's partitioning step, select the option <guimenuitem>Manually edit partition table</guimenuitem> and then simply select an existing partition and change its size." -msgstr "Ha van egy létező rendszered, netán DOS vagy Windows és valamiért meg akarnád őrizni őket, miközben már a Debian rendszert telepíted, biztosítanod kell, akár a partíciók átméretezésével a szabad helyet a Debian telepítésének. A telepítő támogatja a FAT és NTFS fájlrendszerek átméretezését is; a telepítő particionálójába lépve válaszd a <guimenuitem>Partíciós tábla kézi szerkesztése</guimenuitem> lehetőséget, egyszerűen jelölj ki egy létező partíciót és változtasd meg méretét." +msgid "" +"If you have an existing other operating system such as DOS or Windows and " +"you want to preserve that operating system while installing Debian, you may " +"need to resize its partition to free up space for the Debian installation. " +"The installer supports resizing of both FAT and NTFS filesystems; when you " +"get to the installer's partitioning step, select the option " +"<guimenuitem>Manually edit partition table</guimenuitem> and then simply " +"select an existing partition and change its size." +msgstr "" +"Ha van egy létező rendszered, netán DOS vagy Windows és valamiért meg " +"akarnád őrizni őket, miközben már a Debian rendszert telepíted, biztosítanod " +"kell, akár a partíciók átméretezésével a szabad helyet a Debian " +"telepítésének. A telepítő támogatja a FAT és NTFS fájlrendszerek " +"átméretezését is; a telepítő particionálójába lépve válaszd a " +"<guimenuitem>Partíciós tábla kézi szerkesztése</guimenuitem> lehetőséget, " +"egyszerűen jelölj ki egy létező partíciót és változtasd meg méretét." #. Tag: para #: partitioning.xml:713 #, no-c-format -msgid "The PC BIOS generally adds additional constraints for disk partitioning. There is a limit to how many <quote>primary</quote> and <quote>logical</quote> partitions a drive can contain. Additionally, with pre 1994–98 BIOSes, there are limits to where on the drive the BIOS can boot from. More information can be found in the <ulink url=\"&url-partition-howto;\">Linux Partition HOWTO</ulink> and the <ulink url=\"&url-phoenix-bios-faq-large-disk;\">Phoenix BIOS FAQ</ulink>, but this section will include a brief overview to help you plan most situations." -msgstr "A PC BIOS általában további kikötéseket ad a lemez particionáláshoz. Korlátolt, hány quote>elsődleges</quote> és <quote>logikai</quote> partíció lehet egy meghajtón. Ráadásul az 1994–98 előtti BIOSok esetén, korlátolt, a meghajtó mely részéről tud a BIOS indítani. Több adat a <ulink url=\"&url-partition-howto;\">Linux Partíció HOGYAN</ulink> és <ulink url=\"&url-phoenix-bios-faq-large-disk;\">Phoenix BIOS GYIK</ulink> leírásban, de a szakasz rövid leírásban a legtöbb esetre segíti a tervezést." +msgid "" +"The PC BIOS generally adds additional constraints for disk partitioning. " +"There is a limit to how many <quote>primary</quote> and <quote>logical</" +"quote> partitions a drive can contain. Additionally, with pre 1994–98 " +"BIOSes, there are limits to where on the drive the BIOS can boot from. More " +"information can be found in the <ulink url=\"&url-partition-howto;\">Linux " +"Partition HOWTO</ulink> and the <ulink url=\"&url-phoenix-bios-faq-large-" +"disk;\">Phoenix BIOS FAQ</ulink>, but this section will include a brief " +"overview to help you plan most situations." +msgstr "" +"A PC BIOS általában további kikötéseket ad a lemez particionáláshoz. " +"Korlátolt, hány quote>elsődleges</quote> és <quote>logikai</quote> partíció " +"lehet egy meghajtón. Ráadásul az 1994–98 előtti BIOSok esetén, " +"korlátolt, a meghajtó mely részéről tud a BIOS indítani. Több adat a <ulink " +"url=\"&url-partition-howto;\">Linux Partíció HOGYAN</ulink> és <ulink url=" +"\"&url-phoenix-bios-faq-large-disk;\">Phoenix BIOS GYIK</ulink> leírásban, " +"de a szakasz rövid leírásban a legtöbb esetre segíti a tervezést." #. Tag: para #: partitioning.xml:724 #, no-c-format -msgid "<quote>Primary</quote> partitions are the original partitioning scheme for PC disks. However, there can only be four of them. To get past this limitation, <quote>extended</quote> and <quote>logical</quote> partitions were invented. By setting one of your primary partitions as an extended partition, you can subdivide all the space allocated to that partition into logical partitions. You can create up to 60 logical partitions per extended partition; however, you can only have one extended partition per drive." -msgstr "Az <quote>elsődleges</quote>partíciók a PC lemezek eredeti particionáló sémája. Ebből csak 4 lehet. E korlátok átlépésére születtek a <quote>kiterjesztett</quote> és <quote>logikai</quote> partíciók. Egy elsődleges partíció kiterjesztettre állításával e partícióhoz lefoglalt teljes terület logikai partíciókra osztható. Kiterjesztett partíciónként 60 logikai partíció hozható létre; viszont meghajtónként csak 1 kiterjesztett partíció lehet." +msgid "" +"<quote>Primary</quote> partitions are the original partitioning scheme for " +"PC disks. However, there can only be four of them. To get past this " +"limitation, <quote>extended</quote> and <quote>logical</quote> partitions " +"were invented. By setting one of your primary partitions as an extended " +"partition, you can subdivide all the space allocated to that partition into " +"logical partitions. You can create up to 60 logical partitions per extended " +"partition; however, you can only have one extended partition per drive." +msgstr "" +"Az <quote>elsődleges</quote>partíciók a PC lemezek eredeti particionáló " +"sémája. Ebből csak 4 lehet. E korlátok átlépésére születtek a " +"<quote>kiterjesztett</quote> és <quote>logikai</quote> partíciók. Egy " +"elsődleges partíció kiterjesztettre állításával e partícióhoz lefoglalt " +"teljes terület logikai partíciókra osztható. Kiterjesztett partíciónként 60 " +"logikai partíció hozható létre; viszont meghajtónként csak 1 kiterjesztett " +"partíció lehet." #. Tag: para #: partitioning.xml:735 #, no-c-format -msgid "Linux limits the partitions per drive to 15 partitions for SCSI disks (3 usable primary partitions, 12 logical partitions), and 63 partitions on an IDE drive (3 usable primary partitions, 60 logical partitions). However the normal &debian; system provides only 20 devices for partitions, so you may not install on partitions higher than 20 unless you first manually create devices for those partitions." -msgstr "A Linux a meghajtónként partíciók számát 15 partícióra korlátozza SCSI lemezeknél (3 használható elsődleges és 12 logikai) és 63 partícióra IDE meghajtón (3 használható elsődleges és 60 logikai). De a &debian; rendszer csak 20 eszközt rendel partíciókhoz, így telepítésre 20 partíciót használhatsz míg nem hozol előbb létre eszközöket továbbiakhoz." +msgid "" +"Linux limits the partitions per drive to 15 partitions for SCSI disks (3 " +"usable primary partitions, 12 logical partitions), and 63 partitions on an " +"IDE drive (3 usable primary partitions, 60 logical partitions). However the " +"normal &debian; system provides only 20 devices for partitions, so you may " +"not install on partitions higher than 20 unless you first manually create " +"devices for those partitions." +msgstr "" +"A Linux a meghajtónként partíciók számát 15 partícióra korlátozza SCSI " +"lemezeknél (3 használható elsődleges és 12 logikai) és 63 partícióra IDE " +"meghajtón (3 használható elsődleges és 60 logikai). De a &debian; rendszer " +"csak 20 eszközt rendel partíciókhoz, így telepítésre 20 partíciót " +"használhatsz míg nem hozol előbb létre eszközöket továbbiakhoz." #. Tag: para #: partitioning.xml:745 #, no-c-format -msgid "If you have a large IDE disk, and are using neither LBA addressing, nor overlay drivers (sometimes provided by hard disk manufacturers), then the boot partition (the partition containing your kernel image) must be placed within the first 1024 cylinders of your hard drive (usually around 524 megabytes, without BIOS translation)." -msgstr "Nagy IDE lemez esetén, ha nem használsz sem LBA címzést sem átlapoló meghajtókat (néha merevlemez-gyártók adják), az indító partíció (a kernel képet tartalmazó partíció) a merevlemez 1. 1024 cilinderén kell legyen (általában mintegy 524 MB BIOS általi áthelyezés nélkül)." +msgid "" +"If you have a large IDE disk, and are using neither LBA addressing, nor " +"overlay drivers (sometimes provided by hard disk manufacturers), then the " +"boot partition (the partition containing your kernel image) must be placed " +"within the first 1024 cylinders of your hard drive (usually around 524 " +"megabytes, without BIOS translation)." +msgstr "" +"Nagy IDE lemez esetén, ha nem használsz sem LBA címzést sem átlapoló " +"meghajtókat (néha merevlemez-gyártók adják), az indító partíció (a kernel " +"képet tartalmazó partíció) a merevlemez 1. 1024 cilinderén kell legyen " +"(általában mintegy 524 MB BIOS általi áthelyezés nélkül)." #. Tag: para #: partitioning.xml:753 #, no-c-format -msgid "This restriction doesn't apply if you have a BIOS newer than around 1995–98 (depending on the manufacturer) that supports the <quote>Enhanced Disk Drive Support Specification</quote>. Both Lilo, the Linux loader, and Debian's alternative <command>mbr</command> must use the BIOS to read the kernel from the disk into RAM. If the BIOS int 0x13 large disk access extensions are found to be present, they will be utilized. Otherwise, the legacy disk access interface is used as a fall-back, and it cannot be used to address any location on the disk higher than the 1023rd cylinder. Once Linux is booted, no matter what BIOS your computer has, these restrictions no longer apply, since Linux does not use the BIOS for disk access." -msgstr "Ezt már meghaladja minden (gyártótól függően) 1995–98 utáni BIOS, mely már támogatja a <quote>Javított lemez meghajtó támogatás specifikáció</quote>-t. A Lilo, a Linux betöltő nevű program és a Debian alatti <command>mbr</command> program számára is szükséges a BIOS használata a kernel a lemezről a RAM-ba olvasásához. Ha a BIOS 0x13 nagy lemez-elérő kiterjesztések elérhetők, ezeket fogják használni. Ha nem, akkor az elavult lemez-elérő felület, mely nem használható az 1023. cilinder felett. A Linux indulása után a BIOS többé nem számít, a Linux nem használja BIOS-t a lemez-eléréshez sem." +msgid "" +"This restriction doesn't apply if you have a BIOS newer than around " +"1995–98 (depending on the manufacturer) that supports the " +"<quote>Enhanced Disk Drive Support Specification</quote>. Both Lilo, the " +"Linux loader, and Debian's alternative <command>mbr</command> must use the " +"BIOS to read the kernel from the disk into RAM. If the BIOS int 0x13 large " +"disk access extensions are found to be present, they will be utilized. " +"Otherwise, the legacy disk access interface is used as a fall-back, and it " +"cannot be used to address any location on the disk higher than the 1023rd " +"cylinder. Once Linux is booted, no matter what BIOS your computer has, these " +"restrictions no longer apply, since Linux does not use the BIOS for disk " +"access." +msgstr "" +"Ezt már meghaladja minden (gyártótól függően) 1995–98 utáni BIOS, " +"mely már támogatja a <quote>Javított lemez meghajtó támogatás specifikáció</" +"quote>-t. A Lilo, a Linux betöltő nevű program és a Debian alatti " +"<command>mbr</command> program számára is szükséges a BIOS használata a " +"kernel a lemezről a RAM-ba olvasásához. Ha a BIOS 0x13 nagy lemez-elérő " +"kiterjesztések elérhetők, ezeket fogják használni. Ha nem, akkor az elavult " +"lemez-elérő felület, mely nem használható az 1023. cilinder felett. A Linux " +"indulása után a BIOS többé nem számít, a Linux nem használja BIOS-t a lemez-" +"eléréshez sem." #. Tag: para #: partitioning.xml:767 #, no-c-format -msgid "If you have a large disk, you might have to use cylinder translation techniques, which you can set from your BIOS setup program, such as LBA (Logical Block Addressing) or CHS translation mode (<quote>Large</quote>). More information about issues with large disks can be found in the <ulink url=\"&url-large-disk-howto;\">Large Disk HOWTO</ulink>. If you are using a cylinder translation scheme, and the BIOS does not support the large disk access extensions, then your boot partition has to fit within the <emphasis>translated</emphasis> representation of the 1024th cylinder." -msgstr "Nagy lemezekhez cilinder áthelyező technikát kell alkalmazni, mely a BIOS beállításban van, például LBA (logikai blokk címzés) vagy CHS áthelyező mód (<quote>Large</quote>). A nagy lemezekről szóló tudnivalók a <ulink url=\"&url-large-disk-howto;\">Nagy lemezek HOGYAN</ulink> leírásban vannak. Cilinder áthelyező séma esetén, ha a BIOS nem támogatja a nagy lemez-elérés kiterjesztéseket, az indító partíció az 1024. cilinder <emphasis>áthelyezett</emphasis> megfelelőjében kell legyen." +msgid "" +"If you have a large disk, you might have to use cylinder translation " +"techniques, which you can set from your BIOS setup program, such as LBA " +"(Logical Block Addressing) or CHS translation mode (<quote>Large</quote>). " +"More information about issues with large disks can be found in the <ulink " +"url=\"&url-large-disk-howto;\">Large Disk HOWTO</ulink>. If you are using a " +"cylinder translation scheme, and the BIOS does not support the large disk " +"access extensions, then your boot partition has to fit within the " +"<emphasis>translated</emphasis> representation of the 1024th cylinder." +msgstr "" +"Nagy lemezekhez cilinder áthelyező technikát kell alkalmazni, mely a BIOS " +"beállításban van, például LBA (logikai blokk címzés) vagy CHS áthelyező mód " +"(<quote>Large</quote>). A nagy lemezekről szóló tudnivalók a <ulink url=" +"\"&url-large-disk-howto;\">Nagy lemezek HOGYAN</ulink> leírásban vannak. " +"Cilinder áthelyező séma esetén, ha a BIOS nem támogatja a nagy lemez-elérés " +"kiterjesztéseket, az indító partíció az 1024. cilinder " +"<emphasis>áthelyezett</emphasis> megfelelőjében kell legyen." #. Tag: para #: partitioning.xml:779 #, no-c-format -msgid "The recommended way of accomplishing this is to create a small (25–50MB should suffice) partition at the beginning of the disk to be used as the boot partition, and then create whatever other partitions you wish to have, in the remaining area. This boot partition <emphasis>must</emphasis> be mounted on <filename>/boot</filename>, since that is the directory where the Linux kernel(s) will be stored. This configuration will work on any system, regardless of whether LBA or large disk CHS translation is used, and regardless of whether your BIOS supports the large disk access extensions." -msgstr "Ennek teljesítésének ajánlott módja egy kis (25–50MB elég lehet) partíció létrehozása az indító partícióra használt lemez elején és más partíciók létrehozása a fennmaradó területen. Az indító partíciót <emphasis>kötelező</emphasis> a <filename>/boot</filename> könyvtárba csatolni, mivel ez a Linux kernel(ek) helye. Ez esetben az lehet az előny, hogy e konfiguráció a legvégső esetben a legrégebbi rendszereken is működik függetlenül az LBA vagy nagy lemez CHS áthelyezéstől és még attól is, hogy az elavult BIOS támogatja-e a nagy lemez-elérés kiterjesztéseket." +msgid "" +"The recommended way of accomplishing this is to create a small " +"(25–50MB should suffice) partition at the beginning of the disk to be " +"used as the boot partition, and then create whatever other partitions you " +"wish to have, in the remaining area. This boot partition <emphasis>must</" +"emphasis> be mounted on <filename>/boot</filename>, since that is the " +"directory where the Linux kernel(s) will be stored. This configuration will " +"work on any system, regardless of whether LBA or large disk CHS translation " +"is used, and regardless of whether your BIOS supports the large disk access " +"extensions." +msgstr "" +"Ennek teljesítésének ajánlott módja egy kis (25–50MB elég lehet) " +"partíció létrehozása az indító partícióra használt lemez elején és más " +"partíciók létrehozása a fennmaradó területen. Az indító partíciót " +"<emphasis>kötelező</emphasis> a <filename>/boot</filename> könyvtárba " +"csatolni, mivel ez a Linux kernel(ek) helye. Ez esetben az lehet az előny, " +"hogy e konfiguráció a legvégső esetben a legrégebbi rendszereken is működik " +"függetlenül az LBA vagy nagy lemez CHS áthelyezéstől és még attól is, hogy " +"az elavult BIOS támogatja-e a nagy lemez-elérés kiterjesztéseket." #. Tag: para #: partitioning.xml:800 #, no-c-format -msgid "The <command>partman</command> disk partitioner is the default partitioning tool for the installer. It manages the set of partitions and their mount points to ensure that the disks and filesystems are properly configured for a successful installation. It actually uses <command>parted</command> to do the on-disk partitioning." +msgid "" +"The <command>partman</command> disk partitioner is the default partitioning " +"tool for the installer. It manages the set of partitions and their mount " +"points to ensure that the disks and filesystems are properly configured for " +"a successful installation. It actually uses <command>parted</command> to do " +"the on-disk partitioning." msgstr "" #. Tag: title @@ -774,20 +1363,37 @@ msgstr "" #. Tag: para #: partitioning.xml:813 #, no-c-format -msgid "The IA64 EFI firmware supports two partition table (or disk label) formats, GPT and MS-DOS. MS-DOS, the format typically used on i386 PCs, is no longer recommended for IA64 systems. Although the installer also provides <command>cfdisk</command>, you should only use <ulink url=\"parted.txt\"> <command>parted</command></ulink> because only it can manage both GPT and MS-DOS tables correctly." +msgid "" +"The IA64 EFI firmware supports two partition table (or disk label) formats, " +"GPT and MS-DOS. MS-DOS, the format typically used on i386 PCs, is no longer " +"recommended for IA64 systems. Although the installer also provides " +"<command>cfdisk</command>, you should only use <ulink url=\"parted.txt\"> " +"<command>parted</command></ulink> because only it can manage both GPT and MS-" +"DOS tables correctly." msgstr "" #. Tag: para #: partitioning.xml:825 #, no-c-format -msgid "The automatic partitioning recipes for <command>partman</command> allocate an EFI partition as the first partition on the disk. You can also set up the partition under the <guimenuitem>Guided partitioning</guimenuitem> from the main menu in a manner similar to setting up a <emphasis>swap</emphasis> partition." +msgid "" +"The automatic partitioning recipes for <command>partman</command> allocate " +"an EFI partition as the first partition on the disk. You can also set up the " +"partition under the <guimenuitem>Guided partitioning</guimenuitem> from the " +"main menu in a manner similar to setting up a <emphasis>swap</emphasis> " +"partition." msgstr "" #. Tag: para #: partitioning.xml:833 #, no-c-format msgid "" -"The <command>partman</command> partitioner will handle most disk layouts. For those rare cases where it is necessary to manually set up a disk, you can use the shell as described above and run the <command>parted</command> utility directly using its command line interface. Assuming that you want to erase your whole disk and create a GPT table and some partitions, then something similar to the following command sequence could be used: <informalexample><screen>\n" +"The <command>partman</command> partitioner will handle most disk layouts. " +"For those rare cases where it is necessary to manually set up a disk, you " +"can use the shell as described above and run the <command>parted</command> " +"utility directly using its command line interface. Assuming that you want to " +"erase your whole disk and create a GPT table and some partitions, then " +"something similar to the following command sequence could be used: " +"<informalexample><screen>\n" " mklabel gpt\n" " mkpartfs primary fat 0 50\n" " mkpartfs primary linux-swap 51 1000\n" @@ -795,7 +1401,14 @@ msgid "" " set 1 boot on\n" " print\n" " quit\n" -"</screen></informalexample> This creates a new partition table, and three partitions to be used as an EFI boot partition, swap space, and a root file system. Finally it sets the boot flag on the EFI partition. Partitions are specified in Megabytes, with start and end offsets from the beginning of the disk. So, for example, above we created a 1999MB ext2 file system starting at offset 1001MB from the start of the disk. Note that formatting swap space with <command>parted</command> can take a few minutes to complete, as it scans the partition for bad blocks." +"</screen></informalexample> This creates a new partition table, and three " +"partitions to be used as an EFI boot partition, swap space, and a root file " +"system. Finally it sets the boot flag on the EFI partition. Partitions are " +"specified in Megabytes, with start and end offsets from the beginning of the " +"disk. So, for example, above we created a 1999MB ext2 file system starting " +"at offset 1001MB from the start of the disk. Note that formatting swap space " +"with <command>parted</command> can take a few minutes to complete, as it " +"scans the partition for bad blocks." msgstr "" #. Tag: title @@ -807,19 +1420,36 @@ msgstr "" #. Tag: para #: partitioning.xml:859 #, no-c-format -msgid "ELILO, the ia64 boot loader, requires a partition containing a FAT file system with the <userinput>boot</userinput> flag set. The partition must be big enough to hold the boot loader and any kernels or RAMdisks you may wish to boot. A minimum size would be about 20MB, but if you expect to run with multiple kernels, then 128MB might be a better size." +msgid "" +"ELILO, the ia64 boot loader, requires a partition containing a FAT file " +"system with the <userinput>boot</userinput> flag set. The partition must be " +"big enough to hold the boot loader and any kernels or RAMdisks you may wish " +"to boot. A minimum size would be about 20MB, but if you expect to run with " +"multiple kernels, then 128MB might be a better size." msgstr "" #. Tag: para #: partitioning.xml:868 #, no-c-format -msgid "The EFI Boot Manager and the EFI Shell fully support the GPT table so the boot partition does not necessarily have to be the first partition or even on the same disk. This is convenient if you should forget to allocate the partition and only find out after you have formatted the other partitions on your disk(s). The <command>partman</command> partitioner checks for an EFI partition at the same time it checks for a properly set up <emphasis>root</emphasis> partition. This gives you an opportunity to correct the disk layout before the package install begins. The easiest way to correct this omission is to shrink the last partition of the disk to make enough free space for adding an EFI partition." +msgid "" +"The EFI Boot Manager and the EFI Shell fully support the GPT table so the " +"boot partition does not necessarily have to be the first partition or even " +"on the same disk. This is convenient if you should forget to allocate the " +"partition and only find out after you have formatted the other partitions on " +"your disk(s). The <command>partman</command> partitioner checks for an EFI " +"partition at the same time it checks for a properly set up <emphasis>root</" +"emphasis> partition. This gives you an opportunity to correct the disk " +"layout before the package install begins. The easiest way to correct this " +"omission is to shrink the last partition of the disk to make enough free " +"space for adding an EFI partition." msgstr "" #. Tag: para #: partitioning.xml:883 #, no-c-format -msgid "It is strongly recommended that you allocate the EFI boot partition on the same disk as the <emphasis>root</emphasis> filesystem." +msgid "" +"It is strongly recommended that you allocate the EFI boot partition on the " +"same disk as the <emphasis>root</emphasis> filesystem." msgstr "" #. Tag: title @@ -831,13 +1461,27 @@ msgstr "" #. Tag: para #: partitioning.xml:892 #, no-c-format -msgid "The EFI firmware is significantly more sophisticated than the usual BIOS seen on most x86 PCs. Some system vendors take advantage of the ability of the EFI to access files and run programs from a hard disk filesystem to store diagnostics and EFI based system management utilities on the hard disk. This is a separate FAT format filesystem on the system disk. Consult the system documentation and accessories that come with the system for details. The easiest time to set up a diagnostics partition is at the same time you set up the EFI boot partition." +msgid "" +"The EFI firmware is significantly more sophisticated than the usual BIOS " +"seen on most x86 PCs. Some system vendors take advantage of the ability of " +"the EFI to access files and run programs from a hard disk filesystem to " +"store diagnostics and EFI based system management utilities on the hard " +"disk. This is a separate FAT format filesystem on the system disk. Consult " +"the system documentation and accessories that come with the system for " +"details. The easiest time to set up a diagnostics partition is at the same " +"time you set up the EFI boot partition." msgstr "" #. Tag: para #: partitioning.xml:914 #, no-c-format -msgid "SGI machines require an SGI disk label in order to make the system bootable from hard disk. It can be created in the fdisk expert menu. The thereby created volume header (partition number 9) should be at least 3MB large. If the volume header created is too small, you can simply delete partition number 9 and re-add it with a different size. Note that the volume header must start at sector 0." +msgid "" +"SGI machines require an SGI disk label in order to make the system bootable " +"from hard disk. It can be created in the fdisk expert menu. The thereby " +"created volume header (partition number 9) should be at least 3MB large. If " +"the volume header created is too small, you can simply delete partition " +"number 9 and re-add it with a different size. Note that the volume header " +"must start at sector 0." msgstr "" #. Tag: title @@ -849,48 +1493,94 @@ msgstr "" #. Tag: para #: partitioning.xml:932 #, no-c-format -msgid "If you are installing onto a NewWorld PowerMac you must create a special bootstrap partition to hold the boot loader. The size of this partition must be 800KB and its partition type must be <emphasis>Apple_Bootstrap</emphasis>. If the bootstrap partition is not created with the <emphasis>Apple_Bootstrap</emphasis> type your machine cannot be made bootable from the hard disk. This partition can easily be created by creating a new partition in <command>partman</command> and telling it to use it as a <quote>NewWorld boot partition</quote>, or in <command>mac-fdisk</command> using the <userinput>b</userinput> command." +msgid "" +"If you are installing onto a NewWorld PowerMac you must create a special " +"bootstrap partition to hold the boot loader. The size of this partition must " +"be 800KB and its partition type must be <emphasis>Apple_Bootstrap</" +"emphasis>. If the bootstrap partition is not created with the " +"<emphasis>Apple_Bootstrap</emphasis> type your machine cannot be made " +"bootable from the hard disk. This partition can easily be created by " +"creating a new partition in <command>partman</command> and telling it to use " +"it as a <quote>NewWorld boot partition</quote>, or in <command>mac-fdisk</" +"command> using the <userinput>b</userinput> command." msgstr "" #. Tag: para #: partitioning.xml:945 #, no-c-format -msgid "The special partition type Apple_Bootstrap is required to prevent MacOS from mounting and damaging the bootstrap partition, as there are special modifications made to it in order for OpenFirmware to boot it automatically." +msgid "" +"The special partition type Apple_Bootstrap is required to prevent MacOS from " +"mounting and damaging the bootstrap partition, as there are special " +"modifications made to it in order for OpenFirmware to boot it automatically." msgstr "" #. Tag: para #: partitioning.xml:952 #, no-c-format -msgid "Note that the bootstrap partition is only meant to hold 3 very small files: the <command>yaboot</command> binary, its configuration <filename>yaboot.conf</filename>, and a first stage OpenFirmware loader <command>ofboot.b</command>. It need not and must not be mounted on your file system nor have kernels or anything else copied to it. The <command>ybin</command> and <command>mkofboot</command> utilities are used to manipulate this partition." +msgid "" +"Note that the bootstrap partition is only meant to hold 3 very small files: " +"the <command>yaboot</command> binary, its configuration <filename>yaboot." +"conf</filename>, and a first stage OpenFirmware loader <command>ofboot.b</" +"command>. It need not and must not be mounted on your file system nor have " +"kernels or anything else copied to it. The <command>ybin</command> and " +"<command>mkofboot</command> utilities are used to manipulate this partition." msgstr "" #. Tag: para #: partitioning.xml:962 #, no-c-format -msgid "In order for OpenFirmware to automatically boot &debian; the bootstrap partition should appear before other boot partitions on the disk, especially MacOS boot partitions. The bootstrap partition should be the first one you create. However, if you add a bootstrap partition later, you can use <command>mac-fdisk</command>'s <userinput>r</userinput> command to reorder the partition map so the bootstrap partition comes right after the map (which is always partition 1). It's the logical map order, not the physical address order, that counts." +msgid "" +"In order for OpenFirmware to automatically boot &debian; the bootstrap " +"partition should appear before other boot partitions on the disk, especially " +"MacOS boot partitions. The bootstrap partition should be the first one you " +"create. However, if you add a bootstrap partition later, you can use " +"<command>mac-fdisk</command>'s <userinput>r</userinput> command to reorder " +"the partition map so the bootstrap partition comes right after the map " +"(which is always partition 1). It's the logical map order, not the physical " +"address order, that counts." msgstr "" #. Tag: para #: partitioning.xml:974 #, no-c-format -msgid "Apple disks normally have several small driver partitions. If you intend to dual boot your machine with MacOSX, you should retain these partitions and a small HFS partition (800k is the minimum size). That is because MacOSX, on every boot, offers to initialize any disks which do not have active MacOS partitions and driver partitions." +msgid "" +"Apple disks normally have several small driver partitions. If you intend to " +"dual boot your machine with MacOSX, you should retain these partitions and a " +"small HFS partition (800k is the minimum size). That is because MacOSX, on " +"every boot, offers to initialize any disks which do not have active MacOS " +"partitions and driver partitions." msgstr "" #. Tag: para #: partitioning.xml:991 #, no-c-format -msgid "Make sure you create a <quote>Sun disk label</quote> on your boot disk. This is the only kind of partition scheme that the OpenBoot PROM understands, and so it's the only scheme from which you can boot. The <keycap>s</keycap> key is used in <command>fdisk</command> to create Sun disk labels." +msgid "" +"Make sure you create a <quote>Sun disk label</quote> on your boot disk. This " +"is the only kind of partition scheme that the OpenBoot PROM understands, and " +"so it's the only scheme from which you can boot. The <keycap>s</keycap> key " +"is used in <command>fdisk</command> to create Sun disk labels." msgstr "" #. Tag: para #: partitioning.xml:999 #, no-c-format -msgid "Furthermore, on &arch-title; disks, make sure your first partition on your boot disk starts at cylinder 0. While this is required, it also means that the first partition will contain the partition table and the boot block, which are the first two sectors of the disk. You must <emphasis>not</emphasis> put swap on the first partition of the boot drive, since swap partitions do not preserve the first few sectors of the partition. You can put Ext2 or UFS partitions there; these will leave the partition table and the boot block alone." +msgid "" +"Furthermore, on &arch-title; disks, make sure your first partition on your " +"boot disk starts at cylinder 0. While this is required, it also means that " +"the first partition will contain the partition table and the boot block, " +"which are the first two sectors of the disk. You must <emphasis>not</" +"emphasis> put swap on the first partition of the boot drive, since swap " +"partitions do not preserve the first few sectors of the partition. You can " +"put Ext2 or UFS partitions there; these will leave the partition table and " +"the boot block alone." msgstr "" #. Tag: para #: partitioning.xml:1010 #, no-c-format -msgid "It is also advised that the third partition should be of type <quote>Whole disk</quote> (type 5), and contain the entire disk (from the first cylinder to the last). This is simply a convention of Sun disk labels, and helps the <command>SILO</command> boot loader keep its bearings." +msgid "" +"It is also advised that the third partition should be of type <quote>Whole " +"disk</quote> (type 5), and contain the entire disk (from the first cylinder " +"to the last). This is simply a convention of Sun disk labels, and helps the " +"<command>SILO</command> boot loader keep its bearings." msgstr "" - diff --git a/po/hu/random-bits.po b/po/hu/random-bits.po index 2190fbde8..863e720b3 100644 --- a/po/hu/random-bits.po +++ b/po/hu/random-bits.po @@ -1,12 +1,13 @@ msgid "" msgstr "" "Project-Id-Version: \n" -"POT-Creation-Date: \n" +"Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n" +"POT-Creation-Date: 2006-10-11 02:03+0000\n" "PO-Revision-Date: 2006-10-09 11:19+0100\n" "Last-Translator: SZERVÁC Attila <sas@321.hu>\n" "Language-Team: Hungarian\n" "MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=utf-8\n" +"Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Poedit-Language: Hungarian\n" @@ -27,8 +28,22 @@ msgstr "Linux eszközök" #. Tag: para #: random-bits.xml:12 #, no-c-format -msgid "In Linux various special files can be found under the directory <filename>/dev</filename>. These files are called device files and behave unlike ordinary files. The most common types of device files are for block devices and character devices. These files are an interface to the actual driver (part of the Linux kernel) which in turn accesses the hardware. Another, less common, type of device file is the named <firstterm>pipe</firstterm>. The most important device files are listed in the tables below." -msgstr "A Linuxban több különleges fájl található a <filename>/dev</filename> könyvtárban. E fájlokat eszköz-fájloknak hívjuk és eltérnek a sima fájloktól. A legismertebbek típusok a blokk eszköz és karakter eszköz fájlok. E fájlok felületet adnak az adott meghajtókhoz (a Linux kernel részei) a hardverhez féréshez. Egy másik, kevésbé általános típus, melyet csak <firstterm>pipe</firstterm> (cső) néven neveznek. Alább a legfontosabb eszköz-fájlok." +msgid "" +"In Linux various special files can be found under the directory <filename>/" +"dev</filename>. These files are called device files and behave unlike " +"ordinary files. The most common types of device files are for block devices " +"and character devices. These files are an interface to the actual driver " +"(part of the Linux kernel) which in turn accesses the hardware. Another, " +"less common, type of device file is the named <firstterm>pipe</firstterm>. " +"The most important device files are listed in the tables below." +msgstr "" +"A Linuxban több különleges fájl található a <filename>/dev</filename> " +"könyvtárban. E fájlokat eszköz-fájloknak hívjuk és eltérnek a sima " +"fájloktól. A legismertebbek típusok a blokk eszköz és karakter eszköz " +"fájlok. E fájlok felületet adnak az adott meghajtókhoz (a Linux kernel " +"részei) a hardverhez féréshez. Egy másik, kevésbé általános típus, melyet " +"csak <firstterm>pipe</firstterm> (cső) néven neveznek. Alább a legfontosabb " +"eszköz-fájlok." #. Tag: filename #: random-bits.xml:27 @@ -316,38 +331,60 @@ msgstr "" #: random-bits.xml:127 #, no-c-format msgid "" -"The mouse can be used in both the Linux console (with gpm) and the X window environment. The two uses can be made compatible if the gpm repeater is used to allow the signal to flow to the X server as shown: <informalexample><screen>\n" -"mouse => /dev/psaux => gpm => /dev/gpmdata -> /dev/mouse => X\n" +"The mouse can be used in both the Linux console (with gpm) and the X window " +"environment. The two uses can be made compatible if the gpm repeater is used " +"to allow the signal to flow to the X server as shown: " +"<informalexample><screen>\n" +"mouse => /dev/psaux => gpm => /dev/gpmdata -> /dev/mouse => " +"X\n" " /dev/ttyS0 (repeater) (symlink)\n" " /dev/ttyS1\n" -"</screen></informalexample> Set the repeater protocol to be raw (in <filename>/etc/gpm.conf</filename>) while setting X to the original mouse protocol in <filename>/etc/X11/XF86Config</filename> or <filename>/etc/X11/XF86Config-4</filename>." +"</screen></informalexample> Set the repeater protocol to be raw (in " +"<filename>/etc/gpm.conf</filename>) while setting X to the original mouse " +"protocol in <filename>/etc/X11/XF86Config</filename> or <filename>/etc/X11/" +"XF86Config-4</filename>." msgstr "" #. Tag: para #: random-bits.xml:139 #, no-c-format msgid "" -"This approach to use gpm even in X has advantages when the mouse is unplugged inadvertently. Simply restarting gpm with <informalexample><screen>\n" +"This approach to use gpm even in X has advantages when the mouse is " +"unplugged inadvertently. Simply restarting gpm with " +"<informalexample><screen>\n" "# /etc/init.d/gpm restart\n" -"</screen></informalexample> will re-connect the mouse in software without restarting X." +"</screen></informalexample> will re-connect the mouse in software without " +"restarting X." msgstr "" #. Tag: para #: random-bits.xml:148 #, no-c-format -msgid "If gpm is disabled or not installed for some reason, make sure to set X to read directly from a mouse device such as /dev/psaux. For details, refer to the 3-Button Mouse mini-Howto at <filename>/usr/share/doc/HOWTO/en-txt/mini/3-Button-Mouse.gz</filename>, <userinput>man gpm</userinput>, <filename>/usr/share/doc/gpm/FAQ.gz</filename>, and <ulink url=\"&url-xorg;current/doc/html/mouse.html\">README.mouse</ulink>." +msgid "" +"If gpm is disabled or not installed for some reason, make sure to set X to " +"read directly from a mouse device such as /dev/psaux. For details, refer to " +"the 3-Button Mouse mini-Howto at <filename>/usr/share/doc/HOWTO/en-txt/" +"mini/3-Button-Mouse.gz</filename>, <userinput>man gpm</userinput>, " +"<filename>/usr/share/doc/gpm/FAQ.gz</filename>, and <ulink url=\"&url-xorg;" +"current/doc/html/mouse.html\">README.mouse</ulink>." msgstr "" #. Tag: para #: random-bits.xml:158 #, no-c-format -msgid "For PowerPC, in <filename>/etc/X11/XF86Config</filename> or <filename>/etc/X11/XF86Config-4</filename>, set the mouse device to <userinput>\"/dev/input/mice\"</userinput>." +msgid "" +"For PowerPC, in <filename>/etc/X11/XF86Config</filename> or <filename>/etc/" +"X11/XF86Config-4</filename>, set the mouse device to <userinput>\"/dev/input/" +"mice\"</userinput>." msgstr "" #. Tag: para #: random-bits.xml:164 #, no-c-format -msgid "Modern kernels give you the capability to emulate a three-button mouse when your mouse only has one button. Just add the following lines to <filename>/etc/sysctl.conf</filename> file." +msgid "" +"Modern kernels give you the capability to emulate a three-button mouse when " +"your mouse only has one button. Just add the following lines to <filename>/" +"etc/sysctl.conf</filename> file." msgstr "" #. Tag: screen @@ -373,19 +410,30 @@ msgstr "" #. Tag: para #: random-bits.xml:189 #, no-c-format -msgid "The base installation for i386 using the default 2.4 kernel, including all standard packages, requires 573MB of disk space." +msgid "" +"The base installation for i386 using the default 2.4 kernel, including all " +"standard packages, requires 573MB of disk space." msgstr "" #. Tag: para #: random-bits.xml:194 #, no-c-format -msgid "The following table lists sizes reported by aptitude for the tasks listed in tasksel. Note that some tasks have overlapping constituents, so the total installed size for two tasks together may be less than the total obtained by adding up the numbers." +msgid "" +"The following table lists sizes reported by aptitude for the tasks listed in " +"tasksel. Note that some tasks have overlapping constituents, so the total " +"installed size for two tasks together may be less than the total obtained by " +"adding up the numbers." msgstr "" #. Tag: para #: random-bits.xml:201 #, no-c-format -msgid "Note that you will need to add the sizes listed in the table to the size of the base installation when determining the size of partitions. Most of the size listed as <quote>Installed size</quote> will end up in <filename>/usr</filename>; the size listed as <quote>Download size</quote> is (temporarily) required in <filename>/var</filename>." +msgid "" +"Note that you will need to add the sizes listed in the table to the size of " +"the base installation when determining the size of partitions. Most of the " +"size listed as <quote>Installed size</quote> will end up in <filename>/usr</" +"filename>; the size listed as <quote>Download size</quote> is (temporarily) " +"required in <filename>/var</filename>." msgstr "" #. Tag: entry @@ -503,8 +551,7 @@ msgid "<entry>1</entry>" msgstr "" #. Tag: entry -#: random-bits.xml:247 -#: random-bits.xml:260 +#: random-bits.xml:247 random-bits.xml:260 #, no-c-format msgid "<entry>3</entry>" msgstr "" @@ -578,13 +625,19 @@ msgstr "" #. Tag: para #: random-bits.xml:274 #, no-c-format -msgid "The <emphasis>Desktop</emphasis> task will install both the GNOME and KDE desktop environments." +msgid "" +"The <emphasis>Desktop</emphasis> task will install both the GNOME and KDE " +"desktop environments." msgstr "" #. Tag: para #: random-bits.xml:281 #, no-c-format -msgid "If you install in a language other than English, <command>tasksel</command> may automatically install a <firstterm>localization task</firstterm>, if one is available for your language. Space requirements differ per language; you should allow up to 200MB in total for download and installation." +msgid "" +"If you install in a language other than English, <command>tasksel</command> " +"may automatically install a <firstterm>localization task</firstterm>, if one " +"is available for your language. Space requirements differ per language; you " +"should allow up to 200MB in total for download and installation." msgstr "" #. Tag: title @@ -596,13 +649,26 @@ msgstr "" #. Tag: para #: random-bits.xml:298 #, no-c-format -msgid "This section explains how to install &debian; from an existing Unix or Linux system, without using the menu-driven installer as explained in the rest of the manual. This <quote>cross-install</quote> HOWTO has been requested by users switching to &debian; from Red Hat, Mandrake, and SUSE. In this section some familiarity with entering *nix commands and navigating the file system is assumed. In this section, <prompt>$</prompt> symbolizes a command to be entered in the user's current system, while <prompt>#</prompt> refers to a command entered in the Debian chroot." +msgid "" +"This section explains how to install &debian; from an existing Unix or Linux " +"system, without using the menu-driven installer as explained in the rest of " +"the manual. This <quote>cross-install</quote> HOWTO has been requested by " +"users switching to &debian; from Red Hat, Mandrake, and SUSE. In this " +"section some familiarity with entering *nix commands and navigating the file " +"system is assumed. In this section, <prompt>$</prompt> symbolizes a command " +"to be entered in the user's current system, while <prompt>#</prompt> refers " +"to a command entered in the Debian chroot." msgstr "" #. Tag: para #: random-bits.xml:310 #, no-c-format -msgid "Once you've got the new Debian system configured to your preference, you can migrate your existing user data (if any) to it, and keep on rolling. This is therefore a <quote>zero downtime</quote> &debian; install. It's also a clever way for dealing with hardware that otherwise doesn't play friendly with various boot or installation media." +msgid "" +"Once you've got the new Debian system configured to your preference, you can " +"migrate your existing user data (if any) to it, and keep on rolling. This is " +"therefore a <quote>zero downtime</quote> &debian; install. It's also a " +"clever way for dealing with hardware that otherwise doesn't play friendly " +"with various boot or installation media." msgstr "" #. Tag: title @@ -614,27 +680,38 @@ msgstr "" #. Tag: para #: random-bits.xml:323 #, no-c-format -msgid "With your current *nix partitioning tools, repartition the hard drive as needed, creating at least one filesystem plus swap. You need at least 150MB of space available for a console only install, or at least 300MB if you plan to install X." +msgid "" +"With your current *nix partitioning tools, repartition the hard drive as " +"needed, creating at least one filesystem plus swap. You need at least 150MB " +"of space available for a console only install, or at least 300MB if you plan " +"to install X." msgstr "" #. Tag: para #: random-bits.xml:330 #, no-c-format msgid "" -"Create file systems on your partitions. For example, to create an ext3 file system on partition <filename>/dev/hda6</filename> (that's our example root partition): <informalexample><screen>\n" +"Create file systems on your partitions. For example, to create an ext3 file " +"system on partition <filename>/dev/hda6</filename> (that's our example root " +"partition): <informalexample><screen>\n" "# mke2fs -j /dev/hda6\n" -"</screen></informalexample> To create an ext2 file system instead, omit <userinput>-j</userinput>." +"</screen></informalexample> To create an ext2 file system instead, omit " +"<userinput>-j</userinput>." msgstr "" #. Tag: para #: random-bits.xml:340 #, no-c-format msgid "" -"Initialize and activate swap (substitute the partition number for your intended Debian swap partition): <informalexample><screen>\n" +"Initialize and activate swap (substitute the partition number for your " +"intended Debian swap partition): <informalexample><screen>\n" "# mkswap /dev/hda5\n" "# sync; sync; sync\n" "# swapon /dev/hda5\n" -"</screen></informalexample> Mount one partition as <filename>/mnt/debinst</filename> (the installation point, to be the root (<filename>/</filename>) filesystem on your new system). The mount point name is strictly arbitrary, it is referenced later below." +"</screen></informalexample> Mount one partition as <filename>/mnt/debinst</" +"filename> (the installation point, to be the root (<filename>/</filename>) " +"filesystem on your new system). The mount point name is strictly arbitrary, " +"it is referenced later below." msgstr "" #. Tag: screen @@ -648,7 +725,10 @@ msgstr "" #. Tag: para #: random-bits.xml:355 #, no-c-format -msgid "If you want to have parts of the filesystem (e.g. /usr) mounted on separate partitions, you will need to create and mount these directories manually before proceding with the next stage." +msgid "" +"If you want to have parts of the filesystem (e.g. /usr) mounted on separate " +"partitions, you will need to create and mount these directories manually " +"before proceding with the next stage." msgstr "" #. Tag: title @@ -660,60 +740,84 @@ msgstr "" #. Tag: para #: random-bits.xml:366 #, no-c-format -msgid "The utility used by the Debian installer, and recognized as the official way to install a Debian base system, is <command>debootstrap</command>. It uses <command>wget</command> and <command>ar</command>, but otherwise depends only on <classname>/bin/sh</classname> and basic Unix/Linux tools<footnote> <para> These include the GNU core utilities and commands like <command>sed</command>, <command>grep</command>, <command>tar</command> and <command>gzip</command>. </para> </footnote>. Install <command>wget</command> and <command>ar</command> if they aren't already on your current system, then download and install <command>debootstrap</command>." +msgid "" +"The utility used by the Debian installer, and recognized as the official way " +"to install a Debian base system, is <command>debootstrap</command>. It uses " +"<command>wget</command> and <command>ar</command>, but otherwise depends " +"only on <classname>/bin/sh</classname> and basic Unix/Linux tools<footnote> " +"<para> These include the GNU core utilities and commands like <command>sed</" +"command>, <command>grep</command>, <command>tar</command> and <command>gzip</" +"command>. </para> </footnote>. Install <command>wget</command> and " +"<command>ar</command> if they aren't already on your current system, then " +"download and install <command>debootstrap</command>." msgstr "" #. Tag: para #: random-bits.xml:396 #, no-c-format msgid "" -"Or, you can use the following procedure to install it manually. Make a work folder for extracting the .deb into: <informalexample><screen>\n" +"Or, you can use the following procedure to install it manually. Make a work " +"folder for extracting the .deb into: <informalexample><screen>\n" "# mkdir work\n" "# cd work\n" -"</screen></informalexample> The <command>debootstrap</command> binary is located in the Debian archive (be sure to select the proper file for your architecture). Download the <command>debootstrap</command> .deb from the <ulink url=\"http://ftp.debian.org/debian/pool/main/d/debootstrap/\"> pool</ulink>, copy the package to the work folder, and extract the binary files from it. You will need to have root privileges to install the binaries." +"</screen></informalexample> The <command>debootstrap</command> binary is " +"located in the Debian archive (be sure to select the proper file for your " +"architecture). Download the <command>debootstrap</command> .deb from the " +"<ulink url=\"http://ftp.debian.org/debian/pool/main/d/debootstrap/\"> pool</" +"ulink>, copy the package to the work folder, and extract the files from it. " +"You will need to have root privileges to install the files." msgstr "" #. Tag: screen #: random-bits.xml:411 #, no-c-format msgid "" -"# ar -x debootstrap_0.X.X_arch.deb\n" +"# ar -x debootstrap_0.X.X_all.deb\n" "# cd /\n" "# zcat /full-path-to-work/work/data.tar.gz | tar xv" msgstr "" -#. Tag: para -#: random-bits.xml:413 -#, no-c-format -msgid "Note that running <command>debootstrap</command> may require you to have a minimal version of <classname>glibc</classname> installed (currently GLIBC_2.3). <command>debootstrap</command> itself is a shell script, but it calls various utilities that require <classname>glibc</classname>." -msgstr "" - #. Tag: title -#: random-bits.xml:424 +#: random-bits.xml:417 #, no-c-format msgid "Run <command>debootstrap</command>" msgstr "" #. Tag: para -#: random-bits.xml:425 +#: random-bits.xml:418 #, no-c-format -msgid "<command>debootstrap</command> can download the needed files directly from the archive when you run it. You can substitute any Debian archive mirror for <userinput>http.us.debian.org/debian</userinput> in the command example below, preferably a mirror close to you network-wise. Mirrors are listed at <ulink url=\"http://www.debian.org/misc/README.mirrors\"></ulink>." +msgid "" +"<command>debootstrap</command> can download the needed files directly from " +"the archive when you run it. You can substitute any Debian archive mirror " +"for <userinput>http.us.debian.org/debian</userinput> in the command example " +"below, preferably a mirror close to you network-wise. Mirrors are listed at " +"<ulink url=\"http://www.debian.org/misc/README.mirrors\"></ulink>." msgstr "" #. Tag: para -#: random-bits.xml:434 +#: random-bits.xml:427 #, no-c-format -msgid "If you have a &releasename; &debian; CD mounted at <filename>/cdrom</filename>, you could substitute a file URL instead of the http URL: <userinput>file:/cdrom/debian/</userinput>" +msgid "" +"If you have a &releasename; &debian; CD mounted at <filename>/cdrom</" +"filename>, you could substitute a file URL instead of the http URL: " +"<userinput>file:/cdrom/debian/</userinput>" msgstr "" #. Tag: para -#: random-bits.xml:440 +#: random-bits.xml:433 #, no-c-format -msgid "Substitute one of the following for <replaceable>ARCH</replaceable> in the <command>debootstrap</command> command: <userinput>alpha</userinput>, <userinput>arm</userinput>, <userinput>hppa</userinput>, <userinput>i386</userinput>, <userinput>ia64</userinput>, <userinput>m68k</userinput>, <userinput>mips</userinput>, <userinput>mipsel</userinput>, <userinput>powerpc</userinput>, <userinput>s390</userinput>, or <userinput>sparc</userinput>." +msgid "" +"Substitute one of the following for <replaceable>ARCH</replaceable> in the " +"<command>debootstrap</command> command: <userinput>alpha</userinput>, " +"<userinput>arm</userinput>, <userinput>hppa</userinput>, <userinput>i386</" +"userinput>, <userinput>ia64</userinput>, <userinput>m68k</userinput>, " +"<userinput>mips</userinput>, <userinput>mipsel</userinput>, " +"<userinput>powerpc</userinput>, <userinput>s390</userinput>, or " +"<userinput>sparc</userinput>." msgstr "" #. Tag: screen -#: random-bits.xml:457 +#: random-bits.xml:450 #, no-c-format msgid "" "# /usr/sbin/debootstrap --arch ARCH &releasename; \\\n" @@ -721,36 +825,40 @@ msgid "" msgstr "" #. Tag: title -#: random-bits.xml:463 +#: random-bits.xml:456 #, no-c-format msgid "Configure The Base System" msgstr "" #. Tag: para -#: random-bits.xml:464 +#: random-bits.xml:457 #, no-c-format -msgid "Now you've got a real Debian system, though rather lean, on disk. <command>Chroot</command> into it:" +msgid "" +"Now you've got a real Debian system, though rather lean, on disk. " +"<command>Chroot</command> into it:" msgstr "" #. Tag: screen -#: random-bits.xml:469 +#: random-bits.xml:462 #, no-c-format msgid "# LANG= chroot /mnt/debinst /bin/bash" msgstr "" #. Tag: title -#: random-bits.xml:474 +#: random-bits.xml:467 #, no-c-format msgid "Mount Partitions" msgstr "" #. Tag: para -#: random-bits.xml:475 +#: random-bits.xml:468 #, no-c-format msgid "" -"You need to create <filename>/etc/fstab</filename>. <informalexample><screen>\n" +"You need to create <filename>/etc/fstab</filename>. " +"<informalexample><screen>\n" "# editor /etc/fstab\n" -"</screen></informalexample> Here is a sample you can modify to suit: <informalexample><screen>\n" +"</screen></informalexample> Here is a sample you can modify to suit: " +"<informalexample><screen>\n" "# /etc/fstab: static file system information.\n" "#\n" "# file system mount point type options dump pass\n" @@ -767,66 +875,79 @@ msgid "" "/dev/XXX /var ext3 rw,nosuid,nodev 0 2\n" "/dev/XXX /usr ext3 rw,nodev 0 2\n" "/dev/XXX /home ext3 rw,nosuid,nodev 0 2\n" -"</screen></informalexample> Use <userinput>mount -a</userinput> to mount all the file systems you have specified in your <filename>/etc/fstab</filename>, or to mount file systems individually use: <informalexample><screen>\n" +"</screen></informalexample> Use <userinput>mount -a</userinput> to mount all " +"the file systems you have specified in your <filename>/etc/fstab</filename>, " +"or to mount file systems individually use: <informalexample><screen>\n" "# mount /path # e.g.: mount /usr\n" -"</screen></informalexample> You can mount the proc file system multiple times and to arbitrary locations, though <filename>/proc</filename> is customary. If you didn't use <userinput>mount -a</userinput>, be sure to mount proc before continuing:" +"</screen></informalexample> You can mount the proc file system multiple " +"times and to arbitrary locations, though <filename>/proc</filename> is " +"customary. If you didn't use <userinput>mount -a</userinput>, be sure to " +"mount proc before continuing:" msgstr "" #. Tag: screen -#: random-bits.xml:495 +#: random-bits.xml:488 #, no-c-format msgid "# mount -t proc proc /proc" msgstr "" #. Tag: para -#: random-bits.xml:497 +#: random-bits.xml:490 #, no-c-format -msgid "The command <userinput>ls /proc</userinput> should now show a non-empty directory. Should this fail, you may be able to mount proc from outside the chroot:" +msgid "" +"The command <userinput>ls /proc</userinput> should now show a non-empty " +"directory. Should this fail, you may be able to mount proc from outside the " +"chroot:" msgstr "" #. Tag: screen -#: random-bits.xml:503 +#: random-bits.xml:496 #, no-c-format msgid "# mount -t proc proc /mnt/debinst/proc" msgstr "" #. Tag: title -#: random-bits.xml:509 +#: random-bits.xml:502 #, no-c-format msgid "Configure Keyboard" msgstr "" #. Tag: para -#: random-bits.xml:510 +#: random-bits.xml:503 #, no-c-format msgid "To configure your keyboard:" msgstr "" #. Tag: screen -#: random-bits.xml:514 +#: random-bits.xml:507 #, no-c-format msgid "# dpkg-reconfigure console-data" msgstr "" #. Tag: para -#: random-bits.xml:516 +#: random-bits.xml:509 #, no-c-format -msgid "Note that the keyboard cannot be set while in the chroot, but will be configured for the next reboot." +msgid "" +"Note that the keyboard cannot be set while in the chroot, but will be " +"configured for the next reboot." msgstr "" #. Tag: title -#: random-bits.xml:525 +#: random-bits.xml:518 #, no-c-format msgid "Configure Networking" msgstr "" #. Tag: para -#: random-bits.xml:526 +#: random-bits.xml:519 #, no-c-format msgid "" -"To configure networking, edit <filename>/etc/network/interfaces</filename>, <filename>/etc/resolv.conf</filename>, <filename>/etc/hostname</filename> and <filename>/etc/hosts</filename>. <informalexample><screen>\n" +"To configure networking, edit <filename>/etc/network/interfaces</filename>, " +"<filename>/etc/resolv.conf</filename>, <filename>/etc/hostname</filename> " +"and <filename>/etc/hosts</filename>. <informalexample><screen>\n" "# editor /etc/network/interfaces\n" -"</screen></informalexample> Here are some simple examples from <filename>/usr/share/doc/ifupdown/examples</filename>: <informalexample><screen>\n" +"</screen></informalexample> Here are some simple examples from <filename>/" +"usr/share/doc/ifupdown/examples</filename>: <informalexample><screen>\n" "######################################################################\n" "# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)\n" "# See the interfaces(5) manpage for information on what options are\n" @@ -852,80 +973,108 @@ msgid "" "# netmask 255.255.255.0\n" "# broadcast 192.168.0.255\n" "# gateway 192.168.0.1\n" -"</screen></informalexample> Enter your nameserver(s) and search directives in <filename>/etc/resolv.conf</filename>: <informalexample><screen>\n" +"</screen></informalexample> Enter your nameserver(s) and search directives " +"in <filename>/etc/resolv.conf</filename>: <informalexample><screen>\n" "# editor /etc/resolv.conf\n" -"</screen></informalexample> A simple <filename>/etc/resolv.conf</filename>: <informalexample><screen>\n" +"</screen></informalexample> A simple <filename>/etc/resolv.conf</filename>: " +"<informalexample><screen>\n" "search hqdom.local\\000\n" "nameserver 10.1.1.36\n" "nameserver 192.168.9.100\n" -"</screen></informalexample> Enter your system's host name (2 to 63 characters): <informalexample><screen>\n" +"</screen></informalexample> Enter your system's host name (2 to 63 " +"characters): <informalexample><screen>\n" "# echo DebianHostName > /etc/hostname\n" -"</screen></informalexample> If you have multiple network cards, you should arrange the names of driver modules in the <filename>/etc/modules</filename> file into the desired order. Then during boot, each card will be associated with the interface name (eth0, eth1, etc.) that you expect." +"</screen></informalexample> If you have multiple network cards, you should " +"arrange the names of driver modules in the <filename>/etc/modules</filename> " +"file into the desired order. Then during boot, each card will be associated " +"with the interface name (eth0, eth1, etc.) that you expect." msgstr "" #. Tag: title -#: random-bits.xml:563 +#: random-bits.xml:556 #, no-c-format msgid "Configure Locales" msgstr "" #. Tag: para -#: random-bits.xml:564 +#: random-bits.xml:557 #, no-c-format msgid "" -"To configure your locale settings to use a language other than English, install the <classname>locales</classname> support package and configure it: <informalexample><screen>\n" +"To configure your locale settings to use a language other than English, " +"install the <classname>locales</classname> support package and configure it: " +"<informalexample><screen>\n" "# aptitude install locales\n" "# dpkg-reconfigure locales\n" -"</screen></informalexample> NOTE: <classname>apt</classname> must be configured beforehand by creating a sources.list and running <command>aptitude update</command>. Before using locales with character sets other than ASCII or latin1, please consult the appropriate localization HOWTO." +"</screen></informalexample> NOTE: <classname>apt</classname> must be " +"configured beforehand by creating a sources.list and running " +"<command>aptitude update</command>. Before using locales with character sets " +"other than ASCII or latin1, please consult the appropriate localization " +"HOWTO." msgstr "" #. Tag: title -#: random-bits.xml:582 +#: random-bits.xml:575 #, no-c-format msgid "Install a Kernel" msgstr "" #. Tag: para -#: random-bits.xml:583 +#: random-bits.xml:576 #, no-c-format msgid "" -"If you intend to boot this system, you probably want a Linux kernel and a boot loader. Identify available pre-packaged kernels with <informalexample><screen>\n" +"If you intend to boot this system, you probably want a Linux kernel and a " +"boot loader. Identify available pre-packaged kernels with " +"<informalexample><screen>\n" "# apt-cache search linux-image\n" "</screen></informalexample> Then install your choice using its package name." msgstr "" #. Tag: screen -#: random-bits.xml:592 +#: random-bits.xml:585 #, no-c-format -msgid "# aptitude install linux-image-<replaceable>&kernelversion;-arch-etc</replaceable>" +msgid "" +"# aptitude install linux-image-<replaceable>&kernelversion;-arch-etc</" +"replaceable>" msgstr "" #. Tag: title -#: random-bits.xml:598 +#: random-bits.xml:591 #, no-c-format msgid "Set up the Boot Loader" msgstr "" #. Tag: para -#: random-bits.xml:599 +#: random-bits.xml:592 #, no-c-format -msgid "To make your &debian; system bootable, set up your boot loader to load the installed kernel with your new root partition. Note that <command>debootstrap</command> does not install a boot loader, though you can use <command>aptitude</command> inside your Debian chroot to do so." +msgid "" +"To make your &debian; system bootable, set up your boot loader to load the " +"installed kernel with your new root partition. Note that " +"<command>debootstrap</command> does not install a boot loader, though you " +"can use <command>aptitude</command> inside your Debian chroot to do so." msgstr "" #. Tag: para -#: random-bits.xml:606 +#: random-bits.xml:599 #, no-c-format -msgid "Check <userinput>info grub</userinput> or <userinput>man lilo.conf</userinput> for instructions on setting up the bootloader. If you are keeping the system you used to install Debian, just add an entry for the Debian install to your existing grub <filename>menu.lst</filename> or <filename>lilo.conf</filename>. For <filename>lilo.conf</filename>, you could also copy it to the new system and edit it there. After you are done editing, call lilo (remember it will use <filename>lilo.conf</filename> relative to the system you call it from)." +msgid "" +"Check <userinput>info grub</userinput> or <userinput>man lilo.conf</" +"userinput> for instructions on setting up the bootloader. If you are keeping " +"the system you used to install Debian, just add an entry for the Debian " +"install to your existing grub <filename>menu.lst</filename> or " +"<filename>lilo.conf</filename>. For <filename>lilo.conf</filename>, you " +"could also copy it to the new system and edit it there. After you are done " +"editing, call lilo (remember it will use <filename>lilo.conf</filename> " +"relative to the system you call it from)." msgstr "" #. Tag: para -#: random-bits.xml:617 +#: random-bits.xml:610 #, no-c-format msgid "Here is a basic <filename>/etc/lilo.conf</filename> as an example:" msgstr "" #. Tag: screen -#: random-bits.xml:621 +#: random-bits.xml:614 #, no-c-format msgid "" "boot=/dev/hda6\n" @@ -938,16 +1087,23 @@ msgid "" msgstr "" #. Tag: para -#: random-bits.xml:623 +#: random-bits.xml:616 #, no-c-format -msgid "Check <userinput>man yaboot.conf</userinput> for instructions on setting up the bootloader. If you are keeping the system you used to install Debian, just add an entry for the Debian install to your existing <filename>yaboot.conf</filename>. You could also copy it to the new system and edit it there. After you are done editing, call ybin (remember it will use <filename>yaboot.conf</filename> relative to the system you call it from)." +msgid "" +"Check <userinput>man yaboot.conf</userinput> for instructions on setting up " +"the bootloader. If you are keeping the system you used to install Debian, " +"just add an entry for the Debian install to your existing <filename>yaboot." +"conf</filename>. You could also copy it to the new system and edit it there. " +"After you are done editing, call ybin (remember it will use <filename>yaboot." +"conf</filename> relative to the system you call it from)." msgstr "" #. Tag: para -#: random-bits.xml:633 +#: random-bits.xml:626 #, no-c-format msgid "" -"Here is a basic <filename>/etc/yaboot.conf</filename> as an example: <informalexample><screen>\n" +"Here is a basic <filename>/etc/yaboot.conf</filename> as an example: " +"<informalexample><screen>\n" "boot=/dev/hda2\n" "device=hd:\n" "partition=6\n" @@ -956,83 +1112,109 @@ msgid "" "timeout=50\n" "image=/vmlinux\n" "label=Debian\n" -"</screen></informalexample> On some machines, you may need to use <userinput>ide0:</userinput> instead of <userinput>hd:</userinput>." +"</screen></informalexample> On some machines, you may need to use " +"<userinput>ide0:</userinput> instead of <userinput>hd:</userinput>." msgstr "" #. Tag: title -#: random-bits.xml:651 +#: random-bits.xml:644 #, no-c-format msgid "Installing &debian; over Parallel Line IP (PLIP)" msgstr "" #. Tag: para -#: random-bits.xml:653 +#: random-bits.xml:646 #, no-c-format -msgid "This section explains how to install &debian; on a computer without an Ethernet card, but with just a remote gateway computer attached via a Null-Modem cable (also called Null-Printer cable). The gateway computer should be connected to a network that has a Debian mirror on it (e.g. to the Internet)." +msgid "" +"This section explains how to install &debian; on a computer without an " +"Ethernet card, but with just a remote gateway computer attached via a Null-" +"Modem cable (also called Null-Printer cable). The gateway computer should be " +"connected to a network that has a Debian mirror on it (e.g. to the Internet)." msgstr "" #. Tag: para -#: random-bits.xml:661 +#: random-bits.xml:654 #, no-c-format -msgid "In the example in this appendix we will set up a PLIP connection using a gateway connected to the Internet over a dial-up connection (ppp0). We will use IP addresses 192.168.0.1 and 192.168.0.2 for the PLIP interfaces on the target system and the source system respectively (these addresses should be unused within your network address space)." +msgid "" +"In the example in this appendix we will set up a PLIP connection using a " +"gateway connected to the Internet over a dial-up connection (ppp0). We will " +"use IP addresses 192.168.0.1 and 192.168.0.2 for the PLIP interfaces on the " +"target system and the source system respectively (these addresses should be " +"unused within your network address space)." msgstr "" #. Tag: para -#: random-bits.xml:669 +#: random-bits.xml:662 #, no-c-format -msgid "The PLIP connection set up during the installation will also be available after the reboot into the installed system (see <xref linkend=\"boot-new\"/>)." +msgid "" +"The PLIP connection set up during the installation will also be available " +"after the reboot into the installed system (see <xref linkend=\"boot-new\"/" +">)." msgstr "" #. Tag: para -#: random-bits.xml:674 +#: random-bits.xml:667 #, no-c-format -msgid "Before you start, you will need to check the BIOS configuration (IO base address and IRQ) for the parallel ports of both the source and target systems. The most common values are <literal>io=0x378</literal>, <literal>irq=7</literal>." +msgid "" +"Before you start, you will need to check the BIOS configuration (IO base " +"address and IRQ) for the parallel ports of both the source and target " +"systems. The most common values are <literal>io=0x378</literal>, " +"<literal>irq=7</literal>." msgstr "" #. Tag: title -#: random-bits.xml:684 +#: random-bits.xml:677 #, no-c-format msgid "Requirements" msgstr "" #. Tag: para -#: random-bits.xml:687 +#: random-bits.xml:680 #, no-c-format -msgid "A target computer, called <emphasis>target</emphasis>, where Debian will be installed." +msgid "" +"A target computer, called <emphasis>target</emphasis>, where Debian will be " +"installed." msgstr "" #. Tag: para -#: random-bits.xml:693 +#: random-bits.xml:686 #, no-c-format msgid "System installation media; see <xref linkend=\"installation-media\"/>." msgstr "" #. Tag: para -#: random-bits.xml:698 +#: random-bits.xml:691 #, no-c-format -msgid "Another computer connected to the Internet, called <emphasis>source</emphasis>, that will function as the gateway." +msgid "" +"Another computer connected to the Internet, called <emphasis>source</" +"emphasis>, that will function as the gateway." msgstr "" #. Tag: para -#: random-bits.xml:704 +#: random-bits.xml:697 #, no-c-format -msgid "A DB-25 Null-Modem cable. See the <ulink url=\"&url-plip-install-howto;\">PLIP-Install-HOWTO</ulink> for more information on this cable and instructions how to make your own." +msgid "" +"A DB-25 Null-Modem cable. See the <ulink url=\"&url-plip-install-howto;" +"\">PLIP-Install-HOWTO</ulink> for more information on this cable and " +"instructions how to make your own." msgstr "" #. Tag: title -#: random-bits.xml:716 +#: random-bits.xml:709 #, no-c-format msgid "Setting up source" msgstr "" #. Tag: para -#: random-bits.xml:717 +#: random-bits.xml:710 #, no-c-format -msgid "The following shell script is a simple example of how to configure the source computer as a gateway to the Internet using ppp0." +msgid "" +"The following shell script is a simple example of how to configure the " +"source computer as a gateway to the Internet using ppp0." msgstr "" #. Tag: screen -#: random-bits.xml:722 +#: random-bits.xml:715 #, no-c-format msgid "" "#!/bin/sh\n" @@ -1040,90 +1222,113 @@ msgid "" "# We remove running modules from kernel to avoid conflicts and to\n" "# reconfigure them manually.\n" "modprobe -r lp parport_pc\n" -"modprobe parport_pc io=<replaceable>0x378</replaceable> irq=<replaceable>7</replaceable>\n" +"modprobe parport_pc io=<replaceable>0x378</replaceable> irq=<replaceable>7</" +"replaceable>\n" "modprobe plip\n" "\n" "# Configure the plip interface (plip0 for me, see dmesg | grep plip)\n" -"ifconfig <replaceable>plip0 192.168.0.2</replaceable> pointopoint <replaceable>192.168.0.1</replaceable> netmask 255.255.255.255 up\n" +"ifconfig <replaceable>plip0 192.168.0.2</replaceable> pointopoint " +"<replaceable>192.168.0.1</replaceable> netmask 255.255.255.255 up\n" "\n" "# Configure gateway\n" "modprobe iptable_nat\n" -"iptables -t nat -A POSTROUTING -o <replaceable>ppp0</replaceable> -j MASQUERADE\n" +"iptables -t nat -A POSTROUTING -o <replaceable>ppp0</replaceable> -j " +"MASQUERADE\n" "echo 1 > /proc/sys/net/ipv4/ip_forward" msgstr "" #. Tag: title -#: random-bits.xml:728 +#: random-bits.xml:721 #, no-c-format msgid "Installing target" msgstr "" #. Tag: para -#: random-bits.xml:729 +#: random-bits.xml:722 #, no-c-format msgid "" -"Boot the installation media. The installation needs to be run in expert mode; enter <userinput>expert</userinput> at the boot prompt. If you need to set parameters for kernel modules, you also need to do this at the boot prompt. For example, to boot the installer and set values for the <quote>io</quote> and <quote>irq</quote> options for the parport_pc module, enter the following at the boot prompt: <informalexample><screen>\n" -"expert parport_pc.io=<replaceable>0x378</replaceable> parport_pc.irq=<replaceable>7</replaceable>\n" -"</screen></informalexample> Below are the answers that should be given during various stages of the installation." +"Boot the installation media. The installation needs to be run in expert " +"mode; enter <userinput>expert</userinput> at the boot prompt. If you need to " +"set parameters for kernel modules, you also need to do this at the boot " +"prompt. For example, to boot the installer and set values for the <quote>io</" +"quote> and <quote>irq</quote> options for the parport_pc module, enter the " +"following at the boot prompt: <informalexample><screen>\n" +"expert parport_pc.io=<replaceable>0x378</replaceable> parport_pc." +"irq=<replaceable>7</replaceable>\n" +"</screen></informalexample> Below are the answers that should be given " +"during various stages of the installation." msgstr "" #. Tag: guimenuitem -#: random-bits.xml:748 +#: random-bits.xml:741 #, no-c-format msgid "Load installer components from CD" msgstr "" #. Tag: para -#: random-bits.xml:750 +#: random-bits.xml:743 #, no-c-format -msgid "Select the <userinput>plip-modules</userinput> option from the list; this will make the PLIP drivers available to the installation system." +msgid "" +"Select the <userinput>plip-modules</userinput> option from the list; this " +"will make the PLIP drivers available to the installation system." msgstr "" #. Tag: guimenuitem -#: random-bits.xml:758 +#: random-bits.xml:751 #, no-c-format msgid "Detect network hardware" msgstr "" #. Tag: para -#: random-bits.xml:763 +#: random-bits.xml:756 #, no-c-format -msgid "If target <emphasis>does</emphasis> have a network card, a list of driver modules for detected cards will be shown. If you want to force &d-i; to use plip instead, you have to deselect all listed driver modules. Obviously, if target doesn't have a network card, the installer will not show this list." +msgid "" +"If target <emphasis>does</emphasis> have a network card, a list of driver " +"modules for detected cards will be shown. If you want to force &d-i; to use " +"plip instead, you have to deselect all listed driver modules. Obviously, if " +"target doesn't have a network card, the installer will not show this list." msgstr "" #. Tag: para -#: random-bits.xml:772 +#: random-bits.xml:765 #, no-c-format -msgid "Because no network card was detected/selected earlier, the installer will ask you to select a network driver module from a list. Select the <userinput>plip</userinput> module." +msgid "" +"Because no network card was detected/selected earlier, the installer will " +"ask you to select a network driver module from a list. Select the " +"<userinput>plip</userinput> module." msgstr "" #. Tag: guimenuitem -#: random-bits.xml:784 +#: random-bits.xml:777 #, no-c-format msgid "Configure the network" msgstr "" #. Tag: para -#: random-bits.xml:787 +#: random-bits.xml:780 #, no-c-format msgid "Auto-configure network with DHCP: No" msgstr "" #. Tag: para -#: random-bits.xml:792 +#: random-bits.xml:785 #, no-c-format -msgid "IP address: <userinput><replaceable>192.168.0.1</replaceable></userinput>" +msgid "" +"IP address: <userinput><replaceable>192.168.0.1</replaceable></userinput>" msgstr "" #. Tag: para -#: random-bits.xml:797 +#: random-bits.xml:790 #, no-c-format -msgid "Point-to-point address: <userinput><replaceable>192.168.0.2</replaceable></userinput>" +msgid "" +"Point-to-point address: <userinput><replaceable>192.168.0.2</replaceable></" +"userinput>" msgstr "" #. Tag: para -#: random-bits.xml:803 +#: random-bits.xml:796 #, no-c-format -msgid "Name server addresses: you can enter the same addresses used on source (see <filename>/etc/resolv.conf</filename>)" +msgid "" +"Name server addresses: you can enter the same addresses used on source (see " +"<filename>/etc/resolv.conf</filename>)" msgstr "" - |