3 files changed, 0 insertions, 199 deletions
diff --git a/nl/install-methods/tftp/bootp.xml b/nl/install-methods/tftp/bootp.xml
deleted file mode 100644
index 86be45104..000000000
--- a/nl/install-methods/tftp/bootp.xml
+++ /dev/null
@@ -1,73 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 59293 untranslated -->
-
-
-  <sect2 condition="supports-bootp" id="tftp-bootp">
-  <title>Setting up a BOOTP server</title>
-<para>
-
-There are two BOOTP servers available for GNU/Linux. The first is CMU
-<command>bootpd</command>. The other is actually a DHCP server: ISC
-<command>dhcpd</command>. In &debian-gnu; these are contained in the
-<classname>bootp</classname> and <classname>dhcp3-server</classname>
-packages respectively.
-
-</para><para>
-
-To use CMU <command>bootpd</command>, you must first uncomment (or
-add) the relevant line in <filename>/etc/inetd.conf</filename>.  On
-&debian-gnu;, you can run <userinput>update-inetd --enable
-bootps</userinput>, then <userinput>/etc/init.d/inetd
-reload</userinput> to do so. Just in case your BOOTP server does not
-run &debian;, the line in question should look like:
-
-<informalexample><screen>
-bootps  dgram  udp  wait  root  /usr/sbin/bootpd  bootpd -i -t 120
-</screen></informalexample>
-
-Now, you must create an <filename>/etc/bootptab</filename> file.  This
-has the same sort of familiar and cryptic format as the good old BSD
-<filename>printcap</filename>, <filename>termcap</filename>, and
-<filename>disktab</filename> files.  See the
-<filename>bootptab</filename> manual page for more information.  For
-CMU <command>bootpd</command>, you will need to know the hardware
-(MAC) address of the client.  Here is an example
-<filename>/etc/bootptab</filename>:
-
-<informalexample><screen>
-client:\
-  hd=/tftpboot:\
-  bf=tftpboot.img:\
-  ip=192.168.1.90:\
-  sm=255.255.255.0:\
-  sa=192.168.1.1:\
-  ha=0123456789AB:
-</screen></informalexample>
-
-You will need to change at least the <quote>ha</quote> option, which
-specifies the hardware address of the client.  The <quote>bf</quote>
-option specifies the file a client should retrieve via TFTP; see
-<xref linkend="tftp-images"/> for more details.
-
-<phrase arch="mips">
-On SGI machines you can just enter the command monitor and type
-<userinput>printenv</userinput>.  The value of the
-<userinput>eaddr</userinput> variable is the machine's MAC address.
-</phrase>
-
-</para><para>
-
-By contrast, setting up BOOTP with ISC <command>dhcpd</command> is
-really easy, because it treats BOOTP clients as a moderately special
-case of DHCP clients.  Some architectures require a complex
-configuration for booting clients via BOOTP.  If yours is one of
-those, read the section <xref linkend="dhcpd"/>.  Otherwise you
-will probably be able to get away with simply adding the
-<userinput>allow bootp</userinput> directive to the configuration
-block for the subnet containing the client in
-<filename>/etc/dhcp3/dhcpd.conf</filename>, and restart
-<command>dhcpd</command> with <userinput>/etc/init.d/dhcp3-server
-restart</userinput>.
-
-</para>
-  </sect2>
diff --git a/nl/install-methods/tftp/dhcp.xml b/nl/install-methods/tftp/dhcp.xml
deleted file mode 100644
index 6f1a89b81..000000000
--- a/nl/install-methods/tftp/dhcp.xml
+++ /dev/null
@@ -1,94 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 62402 untranslated -->
-
-  <sect2 id="dhcpd">
-   <title>Setting up a DHCP server</title>
-<para>
-
-One free software DHCP server is ISC <command>dhcpd</command>.
-For &debian-gnu;, the <classname>dhcp3-server</classname> package is
-recommended.  Here is a sample configuration file for it (see
-<filename>/etc/dhcp3/dhcpd.conf</filename>):
-
-<informalexample><screen>
-option domain-name "example.com";
-option domain-name-servers ns1.example.com;
-option subnet-mask 255.255.255.0;
-default-lease-time 600;
-max-lease-time 7200;
-server-name "servername";
-
-subnet 192.168.1.0 netmask 255.255.255.0 {
-  range 192.168.1.200 192.168.1.253;
-  option routers 192.168.1.1;
-}
-
-host clientname {
-  filename "/tftpboot.img";
-  server-name "servername";
-  next-server servername;
-  hardware ethernet 01:23:45:67:89:AB;
-  fixed-address 192.168.1.90;
-}
-</screen></informalexample>
-
-</para><para>
-
-In this example, there is one server
-<replaceable>servername</replaceable> which performs all of the work
-of DHCP server, TFTP server, and network gateway.  You will almost
-certainly need to change the domain-name options, as well as the
-server name and client hardware address.  The
-<replaceable>filename</replaceable> option should be the name of the
-file which will be retrieved via TFTP.
-
-</para><para>
-
-After you have edited the <command>dhcpd</command> configuration file,
-restart it with <userinput>/etc/init.d/dhcp3-server restart</userinput>.
-
-</para>
-
-   <sect3 arch="x86">
-   <title>Enabling PXE Booting in the DHCP configuration</title>
-<para>
-Here is another example for a <filename>dhcp.conf</filename> using the
-Pre-boot Execution Environment (PXE) method of TFTP.
-
-<informalexample><screen>
-option domain-name "example.com";
-
-default-lease-time 600;
-max-lease-time 7200;
-
-allow booting;
-allow bootp;
-
-# The next paragraph needs to be modified to fit your case
-subnet 192.168.1.0 netmask 255.255.255.0 {
-  range 192.168.1.200 192.168.1.253;
-  option broadcast-address 192.168.1.255;
-# the gateway address which can be different
-# (access to the internet for instance)
-  option routers 192.168.1.1;
-# indicate the dns you want to use
-  option domain-name-servers 192.168.1.3;
-}
-
-group {
-  next-server 192.168.1.3;
-  host tftpclient {
-# tftp client hardware address
-  hardware ethernet  00:10:DC:27:6C:15;
-  filename "pxelinux.0";
- }
-}
-</screen></informalexample>
-
-Note that for PXE booting, the client filename <filename>pxelinux.0</filename>
-is a boot loader, not a kernel image (see <xref linkend="tftp-images"/>
-below).
-
-</para>
-   </sect3>
-  </sect2>
diff --git a/nl/install-methods/tftp/rarp.xml b/nl/install-methods/tftp/rarp.xml
deleted file mode 100644
index 47715f8db..000000000
--- a/nl/install-methods/tftp/rarp.xml
+++ /dev/null
@@ -1,32 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 62401 untranslated -->
-
-  <sect2 condition="supports-rarp" id="tftp-rarp">
-  <title>Setting up RARP server</title>
-<para>
-
-To set up RARP, you need to know the Ethernet address (a.k.a. the MAC address)
-of the client computers to be installed.
-If you don't know this information, you can
-
-<phrase arch="sparc"> pick it off the initial OpenPROM boot messages, use the
-OpenBoot <userinput>.enet-addr</userinput> command, or </phrase>
-
-boot into <quote>Rescue</quote> mode (e.g., from the rescue floppy) and use the
-command <userinput>ip addr show dev eth0</userinput>.
-
-</para><para>
-
-On a RARP server system using a Linux 2.4 or 2.6 kernel, or Solaris/SunOS,
-you use the <command>rarpd</command> program.
-You need to ensure that the Ethernet hardware address for the client is
-listed in the <quote>ethers</quote> database (either in the
-<filename>/etc/ethers</filename> file, or via NIS/NIS+) and in the
-<quote>hosts</quote> database. Then you need to start the RARP daemon.
-Issue the command (as root): <userinput>/usr/sbin/rarpd -a</userinput>
-on most Linux systems and SunOS 5 (Solaris 2),
-<userinput>/usr/sbin/in.rarpd -a</userinput> on some other Linux systems,
-or <userinput>/usr/etc/rarpd -a</userinput> in SunOS 4 (Solaris 1).
-
-</para>
-  </sect2>