diff options
Diffstat (limited to 'ja/install-methods/boot-usb-files.xml')
-rw-r--r-- | ja/install-methods/boot-usb-files.xml | 215 |
1 files changed, 0 insertions, 215 deletions
diff --git a/ja/install-methods/boot-usb-files.xml b/ja/install-methods/boot-usb-files.xml deleted file mode 100644 index c9c2c0927..000000000 --- a/ja/install-methods/boot-usb-files.xml +++ /dev/null @@ -1,215 +0,0 @@ -<?xml version="1.0" encoding="EUC-JP"?> -<!-- retain these comments for translator revision tracking --> -<!-- original version: 45616 --> - - <sect1 condition="bootable-usb" id="boot-usb-files"> - <title>USB メモリでの起動用ファイルの準備</title> - -<para> - -<!-- -To prepare the USB stick, you will need a system where GNU/Linux is -already running and where USB is supported. You should ensure that the -usb-storage kernel module is loaded (<userinput>modprobe -usb-storage</userinput>) and try to find out which SCSI device the USB -stick has been mapped to (in this example -<filename>/dev/sda</filename> is used). To write to your stick, you -may have to turn off its write protection switch. ---> -USB メモリの準備をするには、 -GNU/Linux が既に動いていて、USB をサポートしているシステムが必要になります。 -usb-storage カーネルモジュールをきちんとロードして -(<userinput>modprobe usb-storage</userinput>)、 -USB メモリをマッピングしているのがどの SCSI デバイスかを検出してみるべきです。 -(この例では <filename>/dev/sda</filename> を使用します) -USB メモリに書き込むために、 -ライトプロテクトスイッチを切る必要があります。 - -</para><para> - -<!-- -Note, that the USB stick should be at least 128 MB in size (smaller -setups are possible if you follow <xref linkend="usb-copy-flexible"/>). ---> -USB メモリは少なくとも 128 MB のサイズがなければなりません -(<xref linkend="usb-copy-flexible"/> のようにすれば、 -より小さなセットアップが可能です)。 - -</para> - - <sect2 id="usb-copy-easy"> - <title>ファイルのコピー — 簡単な方法</title> -<para arch="x86"> - -<!-- -There is an all-in-one file <filename>hd-media/boot.img.gz</filename> -which contains all the installer files (including the kernel) as well -as <command>SYSLINUX</command> and its configuration file. You only -have to extract it directly to to your USB stick: ---> -<command>SYSLINUX</command> や その設定ファイルと同様に、 -(カーネルを含む) インストーラの全ファイルが入った -<filename>hd-media/boot.img.gz</filename> という -オールインワンファイルがあります。 -以下のように USB メモリに直接展開してください。 - -<informalexample><screen> -# zcat boot.img.gz > /dev/<replaceable>sda</replaceable> -</screen></informalexample> - -</para><para arch="powerpc"> - -<!-- -There is an all-in-one file <filename>hd-media/boot.img.gz</filename> -which contains all the installer files (including the kernel) as well -as <command>yaboot</command> and its configuration file. Create a -partition of type "Apple_Bootstrap" on your USB stick using -<command>mac-fdisk</command>'s <userinput>C</userinput> command and -extract the image directly to that: ---> -<command>yaboot</command> や その設定ファイルと同様に、 -(カーネルを含む) インストーラの全ファイルが入った -<filename>hd-media/boot.img.gz</filename> という -オールインワンファイルがあります。 -<command>mac-fdisk</command> の <userinput>C</userinput> コマンドで -USB メモリに "Apple_Bootstrap" タイプのパーティションを作成し、 -以下のように USB メモリに直接展開してください。 - -<informalexample><screen> -# zcat boot.img.gz > /dev/<replaceable>sda2</replaceable> -</screen></informalexample> - -</para> -<warning><para> - -<!-- -Using this method will destroy anything already on the device. Make sure -that you use the correct device name for your USB stick. ---> -この方法を使うとデバイス上の既存の物は破壊されてしまいます。 -USB メモリの正しいデバイス名を確認して使用してください。 - -</para></warning> -<para> - -<!-- -After that, mount the USB memory stick (<userinput>mount -<replaceable arch="x86">/dev/sda</replaceable> -<replaceable arch="powerpc">/dev/sda2</replaceable> -/mnt</userinput>), which will now have -<phrase arch="x86">a FAT filesystem</phrase> -<phrase arch="powerpc">an HFS filesystem</phrase> -on it, and copy a Debian netinst or businesscard ISO image to it -(see <xref linkend="usb-add-iso"/>). -Unmount the stick (<userinput>umount /mnt</userinput>) and you are done. ---> -その後、USB メモリ -(<phrase arch="x86">FAT ファイルシステム</phrase> -<phrase arch="powerpc">HFS ファイルシステム</phrase>になっている) をマウントし -(<userinput>mount <replaceable arch="x86">/dev/sda</replaceable> -<replaceable arch="powerpc">/dev/sda2</replaceable> -/mnt</userinput>)、そこに Debian netinst か、 -名刺型 ISO イメージをコピーしてください (<xref linkend="usb-add-iso"/> 参照)。 -終わったら、USB メモリをアンマウントしてください -(<userinput>umount /mnt</userinput>)。 - -</para> - </sect2> - - <sect2 id="usb-copy-flexible"> - <title>ファイルのコピー — 柔軟な方法</title> -<para> - -<!-- -If you like more flexibility or just want to know what's going on, you -should use the following method to put the files on your stick. ---> -もっと柔軟なものがよかったり、何が起きているか知りたいのなら、 -以下に説明する USB メモリにファイルを置く方法を使用すべきです。 - -</para> - -&usb-setup-x86.xml; -&usb-setup-powerpc.xml; - - </sect2> - - <sect2 id="usb-add-iso"> -<!-- - <title>Adding an ISO image</title> ---> - <title>ISO イメージの追加</title> -<para> - -<!-- -The installer will look for a Debian ISO image on the stick as its source -for additional data needed for the installation. So your next step is to -copy a Debian ISO image (businesscard, netinst or even a full CD image) -onto your stick (be sure to select one that fits). The file name of the -image must end in <filename>.iso</filename>. ---> -インストーラは、USB メモリ上の Debian ISO イメージを探し、 -インストールに必要な追加データの取得元とします。 -ですから次のステップは、 -Debian ISO イメージ (名刺、netinst、完全版のいずれか) を、 -USB メモリに (入るものを選んで) 入れることです。 -ISO イメージのファイル名は <filename>.iso</filename> -で終わっていなければなりません。 - -</para><para> - -<!-- -If you want to install over the network, without using an ISO image, -you will of course skip the previous step. Moreover you will have to -use the initial ramdisk from the <filename>netboot</filename> -directory instead of the one from <filename>hd-media</filename>, -because <filename>hd-media/initrd.gz</filename> does not have network -support. ---> -ISO イメージを使わずネットワーク越しにインストールしたければ、 -もちろん前の手順をスキップしてください。 -さらに、<filename>hd-media/initrd.gz</filename> -はネットワークをサポートしないので、 -<filename>hd-media</filename> のものの代わりに、 -<filename>netboot</filename> ディレクトリにある -初期 RAM ディスクを使わなければならないでしょう。 - -</para><para> - -<!-- -When you are done, unmount the USB memory stick (<userinput>umount -/mnt</userinput>) and activate its write protection switch. ---> -終わったら、USB メモリをアンマウントし -(<userinput>umount /mnt</userinput>)、 -ライトプロテクトスイッチを有効にしてください。 - -</para> - </sect2> - - <!-- TODO: doesn't this section belong later? --> - <sect2 arch="x86"> -<!-- - <title>Booting the USB stick</title> ---> - <title>USB メモリからの起動</title> -<warning><para> - -<!-- -If your system refuses to boot from the memory stick, the stick may -contain an invalid master boot record (MBR). To fix this, use the -<command>install-mbr</command> command from the package -<classname>mbr</classname>: ---> -システムが USB メモリから起動できなければ、 -この USB メモリには無効なマスターブートレコード (MBR) があります。 -これを修正するために、<classname>mbr</classname> パッケージの -<command>install-mbr</command> コマンドを次のように使用してください。 - -<informalexample><screen> -# install-mbr /dev/<replaceable>sda</replaceable> -</screen></informalexample> - -</para></warning> - </sect2> - </sect1> |