summaryrefslogtreecommitdiff
path: root/ja/appendix/example-preseed-etch.xml
diff options
context:
space:
mode:
Diffstat (limited to 'ja/appendix/example-preseed-etch.xml')
-rw-r--r--ja/appendix/example-preseed-etch.xml372
1 files changed, 372 insertions, 0 deletions
diff --git a/ja/appendix/example-preseed-etch.xml b/ja/appendix/example-preseed-etch.xml
new file mode 100644
index 000000000..41639d202
--- /dev/null
+++ b/ja/appendix/example-preseed-etch.xml
@@ -0,0 +1,372 @@
+<!-- retain these comments for translator revision tracking -->
+<!-- original version: 30373 -->
+
+<informalexample condition="etch"><screen>
+#### Startup.
+
+# To use a preseed file, you'll first need to boot the installer,
+# and tell it what preseed file to use. This is done by passing the
+# kernel a boot parameter, either manually at boot or by editing the
+# syslinux.cfg (or similar) file and adding the parameter to the end
+# of the append line(s) for the kernel.
+#
+# If you're netbooting, use this:
+# preseed/url=http://host/path/to/preseed
+# If you're remastering a CD, you could use this:
+# preseed/file=/cdrom/preseed
+# If you're installing from USB media, use this, and put the preseed file
+# in the toplevel directory of the USB stick.
+# preseed/file=/hd-media/preseed
+#
+# If you feel comfortable modifying the installer's initrd image,
+# you can also place a preseed file in the root directory of the initrd's
+# filesystem, named "preseed.cfg" -- the installer will always use this
+# file if it is present. Otherwise, be sure to copy this file to the location
+# you specify.
+#
+# To make sure the installer gets the right preseed file, you can specify
+# a checksum for the file. Currently this needs to be a md5sum, and if
+# specified it must match the file or the installer will refuse to use the
+# file.
+# preseed/url/checksum=5da499872becccfeda2c4872f9171c3d
+# preseed/file/checksum=5da499872becccfeda2c4872f9171c3d
+#
+# Some parts of the installation process cannot be automated using
+# some forms of preseeding, because the questions are asked before
+# the preseed file is loaded. For example, if the preseed file is
+# downloaded over the network, the network setup must be done first.
+# One reason to use initrd preseeding is that it allows preseeding
+# of even these early steps of the installation process.
+#
+# If a preseed file cannot be used to preseed some steps, the install can
+# still be fully automated, since you can pass preseed values to the kernel
+# on the command line. Just pass path/to/var=value for any of the preseed
+# variables listed below.
+#
+# While you're at it, you may want to throw a debconf/priority=critical in
+# there, to avoid most questions even if the preseeding below misses some.
+# And you might set the timeout to 1 in syslinux.cfg to avoid needing to hit
+# enter to boot the installer.
+#
+# Note that the 2.4 kernel accepts a maximum of 8 command line options and
+# 8 environment options (including any options added by default for the
+# installer). If these numbers are exceeded, 2.4 kernels will drop any
+# excess options and 2.6 kernels will panic. With kernel 2.6.9 or newer,
+# you can use 32 command line options and 32 environment options.
+#
+# Some of the default options, like 'vga=normal' may be safely removed
+# for most installations, which may allow you to add more options for
+# preseeding.
+
+# To select your language and country, use this setting, but remember
+# that this will only work for initrd based preseeding, for other forms of
+# preseeding you must convert it into a kernel parameter,
+# such as debian-installer/locale=en_US
+d-i debian-installer/locale string en_US
+
+# To select your keyboard, use this setting. Again it will need to be
+# passed as a kernel parameter for most preseed setups.
+d-i console-keymaps-at/keymap select us
+
+#### Network configuration.
+
+# Of course, this won't work if you're loading your preseed file from the
+# network! But it's great if you're booting from CD or USB stick. You can
+# also pass network config parameters in on the kernel params if you are
+# loading preseed files from the network.
+
+# netcfg will choose an interface that has link if possible. This makes it
+# skip displaying a list if there is more than one interface.
+d-i netcfg/choose_interface select auto
+
+# If you have a slow dhcp server and the installer times out waiting for
+# it, this might be useful.
+#d-i netcfg/dhcp_timeout string 60
+
+# If you prefer to configure the network manually, here's how:
+#d-i netcfg/disable_dhcp boolean true
+#d-i netcfg/get_nameservers string 192.168.1.1
+#d-i netcfg/get_ipaddress string 192.168.1.42
+#d-i netcfg/get_netmask string 255.255.255.0
+#d-i netcfg/get_gateway string 192.168.1.1
+#d-i netcfg/confirm_static boolean true
+
+# Note that any hostname and domain names assigned from dhcp take
+# precedence over values set here. However, setting the values still
+# prevents the questions from being shown even if values come from dhcp.
+d-i netcfg/get_hostname string unassigned-hostname
+d-i netcfg/get_domain string unassigned-domain
+
+# Disable that annoying WEP key dialog.
+d-i netcfg/wireless_wep string
+# The wacky dhcp hostname that some ISPs use as a password of sorts.
+#d-i netcfg/dhcp_hostname string radish
+
+#### Mirror settings.
+
+d-i mirror/country string enter information manually
+d-i mirror/http/hostname string http.us.debian.org
+d-i mirror/http/directory string /debian
+d-i mirror/http/proxy string
+
+# What suite of Debian to install.
+#d-i mirror/suite string testing
+# What suite of Debian to use for loading installer components.
+# (Defaults to same as mirror/suite.)
+#d-i mirror/udeb/suite string testing
+
+#### Partitioning.
+
+# If the system has free space you can choose to only partition that space.
+#d-i partman-auto/init_automatically_partition \
+# select Use the largest continuous free space
+
+# Alternatively, you can specify a disk to partition. The device name can
+# be given in either devfs or traditional non-devfs format.
+# For example, to use the first disk devfs knows of:
+d-i partman-auto/disk string /dev/discs/disc0/disc
+
+# You can choose from any of the predefined partitioning recipes:
+d-i partman-auto/choose_recipe \
+ select All files in one partition (recommended for new users)
+#d-i partman-auto/choose_recipe select Desktop machine
+#d-i partman-auto/choose_recipe select Multi-user workstation
+
+# Or provide a recipe of your own...
+# The recipe format is documented in the file devel/partman-auto-recipe.txt.
+# If you have a way to get a recipe file into the d-i environment, you can
+# just point at it.
+#d-i partman-auto/expert_recipe_file string /hd-media/recipe
+
+# If not, you can put an entire recipe the preseed file in one (logical)
+# line. This example creates a small /boot partition, suitable swap, and
+# uses the rest of the space for the root partition:
+#d-i partman-auto/expert_recipe string \
+# boot-root :: \
+# 40 50 100 ext3 \
+# $primary{ } $bootable{ } \
+# method{ format } format{ } \
+# use_filesystem{ } filesystem{ ext3 } \
+# mountpoint{ /boot } \
+# . \
+# 500 10000 1000000000 ext3 \
+# method{ format } format{ } \
+# use_filesystem{ } filesystem{ ext3 } \
+# mountpoint{ / } \
+# . \
+# 64 512 300% linux-swap \
+# method{ swap } format{ } \
+# .
+
+# This makes partman automatically partition without confirmation.
+d-i partman/confirm_write_new_label boolean true
+d-i partman/choose_partition \
+ select Finish partitioning and write changes to disk
+d-i partman/confirm boolean true
+
+#### Boot loader installation.
+
+# Grub is the default boot loader (for x86). If you want lilo installed
+# instead, uncomment this:
+#d-i grub-installer/skip boolean true
+
+# This is fairly safe to set, it makes grub install automatically to the MBR
+# if no other operating system is detected on the machine.
+d-i grub-installer/only_debian boolean true
+
+# This one makes grub-installer install to the MBR if if finds some other OS
+# too, which is less safe as it might not be able to boot that other OS.
+d-i grub-installer/with_other_os boolean true
+
+# Alternatively, if you want to install to a location other than the mbr,
+# uncomment and edit these lines:
+#d-i grub-installer/bootdev string (hd0,0)
+#d-i grub-installer/only_debian boolean false
+#d-i grub-installer/with_other_os boolean false
+
+#### Finishing up the first stage install.
+
+# Avoid that last message about the install being complete.
+d-i prebaseconfig/reboot_in_progress note
+
+# This will prevent the installer from ejecting the CD during the reboot,
+# which is useful in some situations.
+#d-i cdrom-detect/eject boolean false
+
+#### Shell commands.
+
+# d-i preseeding is inherently not secure. Nothing in the installer checks
+# for attempts at buffer overflows or other exploits of the values of a
+# preseed file like this one. Only use preseed files from trusted
+# locations! To drive that home, and because it's generally useful, here's
+# a way to run any shell command you'd like inside the installer,
+# automatically.
+
+# This first command is run as early as possible, just after
+# preseeding is read.
+#d-i preseed/early_command string anna-install some-udeb
+
+# This command is run just before the install finishes, but when there is
+# still a usable /target directory.
+#d-i preseed/late_command string echo foo > /target/etc/bar
+
+# This command is run just as base-config is starting up.
+#base-config base-config/early_command string echo hi mom
+
+# This command is run after base-config is done, just before the login:
+# prompt. This is a good way to install a set of packages you want, or to
+# tweak the configuration of the system.
+#base-config base-config/late_command \
+# string apt-get install zsh; chsh -s /bin/zsh
+
+###### Preseeding the 2nd stage of the installation.
+
+#### Preseeding base-config.
+
+# Avoid the introductory message.
+base-config base-config/intro note
+
+# Avoid the final message.
+base-config base-config/login note
+
+# If you installed a display manager, but don't want to start it immediately
+# after base-config finishes.
+#base-config base-config/start-display-manager boolean false
+
+# Some versions of the installer can report back on what you've installed.
+# The default is not to report back, but sending reports helps the project
+# determine what software is most popular and include it on CDs.
+#popularity-contest popularity-contest/participate boolean false
+
+#### Clock and time zone setup.
+
+# Controls whether or not the hardware clock is set to UTC.
+d-i clock-setup/utc boolean true
+
+# You may set this to any valid setting for $TZ; see the contents of
+# /usr/share/zoneinfo/ for options.
+d-i time/zone string US/Eastern
+
+#### Account setup.
+
+# To preseed the root password, you have to put it in the clear in this
+# file. That is not a very good idea, use caution!
+#passwd passwd/root-password password r00tme
+#passwd passwd/root-password-again password r00tme
+
+# If you want to skip creation of a normal user account.
+#passwd passwd/make-user boolean false
+
+# Alternatively, you can preseed the user's name and login.
+#passwd passwd/user-fullname string Debian User
+#passwd passwd/username string debian
+# And their password, but use caution!
+#passwd passwd/user-password password insecure
+#passwd passwd/user-password-again password insecure
+
+#### Apt setup.
+
+# This question controls what source the second stage installation uses
+# for packages. Choices are cdrom, http, ftp, filesystem, edit sources list
+# by hand
+base-config apt-setup/uri_type select http
+
+# If you choose ftp or http, you'll be asked for a country and a mirror.
+base-config apt-setup/country select enter information manually
+base-config apt-setup/hostname string http.us.debian.org
+base-config apt-setup/directory string /debian
+# Stop after choosing one mirror.
+base-config apt-setup/another boolean false
+
+# You can choose to install non-free and contrib software.
+#base-config apt-setup/non-free boolean true
+#base-config apt-setup/contrib boolean true
+
+# Do enable security updates.
+base-config apt-setup/security-updates boolean true
+
+#### Package selection.
+
+# You can choose to install any combination of tasks that are available.
+# Available tasks as of this writing include: Desktop environment,
+# Web server, Print server, DNS server, File server, Mail server,
+# SQL database, Laptop, Standard system, manual package selection. The
+# last of those will run aptitude. You can also choose to install no
+# tasks, and force the installation of a set of packages in some other
+# way. We recommend always including the Standard system task.
+tasksel tasksel/first multiselect Desktop environment, Standard system
+#tasksel tasksel/first multiselect Web server, Standard system
+
+#### Mailer configuration.
+
+# During a normal install, exim asks only a few questions. Here's how to
+# avoid even those. More complicated preseeding is possible.
+exim4-config exim4/dc_eximconfig_configtype \
+ select no configuration at this time
+exim4-config exim4/no_config boolean true
+exim4-config exim4/no_config boolean true
+
+# It's a good idea to set this to whatever user account you choose to
+# create. Leaving the value blank results in postmaster mail going to
+# /var/mail/mail.
+exim4-config exim4/dc_postmaster string
+
+#### X Configuration.
+
+# Preseeding Debian's X config is possible, but you probably need to know
+# some details about the video hardware of the machine, since Debian's X
+# configurator does not do fully automatic configuration of everything.
+
+# X can detect the right driver for some cards, but if you're preseeding,
+# you override whatever it chooses. Still, vesa will work most places.
+#xserver-xfree86 xserver-xfree86/config/device/driver select vesa
+
+# A caveat with mouse autodetection is that if it fails, X will retry it
+# over and over. So if it's preseeded to be done, there is a possibility of
+# an infinite loop if the mouse is not autodetected.
+#xserver-xfree86 xserver-xfree86/autodetect_mouse boolean true
+
+# Monitor autodetection is recommended.
+xserver-xfree86 xserver-xfree86/autodetect_monitor boolean true
+# Uncomment if you have an LCD display.
+#xserver-xfree86 xserver-xfree86/config/monitor/lcd boolean true
+# X has three configuration paths for the monitor. Here's how to preseed
+# the "medium" path, which is always available. The "simple" path may not
+# be available, and the "advanced" path asks too many questions.
+xserver-xfree86 xserver-xfree86/config/monitor/selection-method \
+ select medium
+xserver-xfree86 xserver-xfree86/config/monitor/mode-list \
+ select 1024x768 @ 60 Hz
+
+#### Everything else.
+
+# Depending on what software you choose to install, or if things go wrong
+# during the installation process, it's possible that other questions may
+# be asked. You can preseed those too, of course. To get a list of every
+# possible question that could be asked during an install, do an
+# installation, and then run these commands:
+# debconf-get-selections --installer > file
+# debconf-get-selections >> file
+
+# If you like, you can include other preseed files into this one.
+# Any settings in those files will override pre-existing settings from this
+# file. More that one file can be listed, separated by spaces; all will be
+# loaded. The included files can have preseed/include directives of their
+# own as well. Note that if the filenames are relative, they are taken from
+# the same directory as the preseed file that includes them.
+#d-i preseed/include string x.cfg
+
+# The installer can optionally verify checksums of preseed files before
+# using them. Currently only md5sums are supported, list the md5sums
+# in the same order as the list of files to include.
+#d-i preseed/include/checksum string 5da499872becccfeda2c4872f9171c3d
+
+# More flexibly, this runs a shell command and if it outputs the names of
+# preseed files, includes those files.
+#d-i preseed/include_command \
+# string echo if [ "`hostname`" = bob ]; then echo bob.cfg; fi
+
+# To check the format of your preseed file before performing an install,
+# you can use debconf-set-selections:
+# debconf-set-selections -c preseed.cfg
+</screen></informalexample>