1 files changed, 0 insertions, 325 deletions
diff --git a/da/howto/installation-howto.xml b/da/howto/installation-howto.xml
deleted file mode 100644
index fc7612447..000000000
--- a/da/howto/installation-howto.xml
+++ /dev/null
@@ -1,325 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 22664 untranslated -->
-
-<appendix id="installation-howto">
-<title>Installation Howto</title>
-
-<para>
-
-This document describes how to install &debian; &releasename; for
-the &arch-title; (<quote>&architecture;</quote>) with the
-new &d-i;. It is a quick walkthrough of the installation process
-which should contain all the information you will need for most installs.
-When more information can be useful, we will link to more detailed
-explanations in the <link linkend="debian_installation_guide">&debian;
-Installation Guide</link>.
-
-</para>
-
- <sect1 id="howto-preliminaries">
- <title>Preliminaries</title>
-<para>
-
-<phrase condition="unofficial-build">
-The debian-installer is still in a beta state.
-</phrase>
-If you encounter bugs during your install, please refer to
-<xref linkend="submit-bug" /> for instructions
-on how to report them. If you have questions which cannot be
-answered by this document, please direct them to the debian-boot
-mailing list (&email-debian-boot-list;) or ask on irc (#debian-boot
-on the freenode network).
-
-</para>
- </sect1>
-
- <sect1 id="howto-getting-images">
- <title>Booting the installer</title>
-<para>
-
-<phrase condition="unofficial-build">
-For some quick links to CD images, check out the <ulink url="&url-d-i;">
-&d-i; home page</ulink>.
-</phrase>
-The debian-cd team provides builds of CD images using &d-i; on the
-<ulink url="&url-debian-cd;">Debian CD page</ulink>.
-For more information on where to get CDs, see <xref linkend="official-cdrom" />.
-
-</para><para>
-
-Some installation methods require other images than CD images.
-<phrase condition="unofficial-build">
-The <ulink url="&url-d-i;">&d-i; home page</ulink> has links to
-other images.
-</phrase>
-<xref linkend="where-files" /> explains how to find images on Debian
-mirrors.
-
-</para><para>
-
-The subsections below will give the details about which images you should
-get for each possible means of installation.
-
-</para>
-  
-  <sect2 id="howto-getting-images-cdrom">
-  <title>CDROM</title>
-  
-<para>
-
-There are two different netinst CD images which can be used to install
-&releasename; with the &d-i;. These images are intended to boot from CD 
-and install additional packages over a network, hence the name 'netinst'.
-The difference between the two images is that on the full netinst image
-the base packages are included, whereas you have to download these from
-the web if you are using the business card image. If you'd rather, you can
-get a full size CD image which will not need the network to install. You
-only need the first CD of the set.
-
-</para><para>
-
-Download whichever type you prefer and burn it to a CD.
-<phrase arch="x86">To boot the CD, you may need to change your BIOS
-configuration, as explained in <xref linkend="bios-setup" />.</phrase>
-<phrase arch="powerpc">
-To boot a PowerMac from CD, press the <keycap>c</keycap> key while booting. See
-<xref linkend="boot-cd" /> for other ways to boot from CD.
-</phrase>
-
-</para>
-  </sect2>
-  
-  <sect2 condition="supports-floppy-boot" id="howto-getting-images-floppy">
-  <title>Floppy</title>
-<para>
-
-If you can't boot from CD, you can download floppy images to install
-Debian. You need the <filename>floppy/boot.img</filename>, the
-<filename>floppy/root.img</filename> and possibly one of the driver disks.
-
-</para><para>
-
-The boot floppy is the one with <filename>boot.img</filename> on it.
-This floppy, when booted, will prompt you to insert a second floppy &mdash;
-use the one with <filename>root.img</filename> on it.
-
-</para><para>
-
-If you're planning to install over the network, you will usually need
-the <filename>floppy/net-drivers.img</filename>, which contains additional
-drivers for many ethernet cards, and support for PCMCIA.
-
-</para><para>
-
-If you have a CD, but cannot boot from it, then boot from floppies and use
-<filename>floppy/cd-drivers.img</filename> on a driver disk to complete the
-install using the CD.
-
-</para><para>
-
-Floppy disks are one of the least reliable media around, so be prepared for
-lots of bad disks (see <xref linkend="unreliable-floppies" />). Each
-<filename>.img</filename> file you downloaded goes on a single floppy;
-you can use the dd command to write it to /dev/fd0 or some other means 
-(see <xref linkend="create-floppy" /> for details).
-Since you'll have more than one floppy, it's a good idea to label them.
-
-</para>
-  </sect2>
-  
-  <sect2 condition="bootable-usb" id="howto-getting-images-usb">
-  <title>USB memory stick</title>
-<para>
-
-It's also possible to install from removable USB storage devices. For
-example a USB keychain can make a handy Debian install media that you
-can take with you anywhere.
-
-</para><para>
-
-The easiest way to prepare your USB memory stick is to download
-<filename>hd-media/boot.img.gz</filename>, and use gunzip to extract the 128 MB
-image from that file. Write this image directly to your memory stick, which
-must be at least 128 mb in size. Of course this will destroy anything already
-on the memory stick. Then mount the memory stick, which will now have a FAT
-filesystem on it. Next, download a Debian netinst CD image, and copy that file
-to the memory stick; any filename is ok as long as it ends in ".iso".
-
-</para><para>
-
-There are other, more flexible ways to set up a memory stick to use the
-debian-installer, and it's possible to get it to work with smaller memory
-sticks. For details, see <xref linkend="boot-usb-files" />.
-
-</para><para arch="x86">
-
-Some BIOSes can boot USB storage directly, and some cannot. You may need to
-configure your BIOS to boot from a "removable drive" or even a "USB-ZIP" to
-get it to boot from the USB device. If it doesn't, you can boot from one
-floppy and use the USB stick for the rest of the install. For helpful hints
-and details, see <xref linkend="usb-boot" />.
-
-</para>
-  </sect2>
-  
-  <sect2 id="howto-getting-images-netboot">
-  <title>Booting from network</title>
-<para>
-	
-It's also possible to boot &d-i; completely from the net. The
-various methods to netboot depend on your architecture and netboot setup.
-The files in <filename>netboot/</filename> can be used to netboot &d-i;.
-
-</para><para arch="x86">
-
-The easiest thing to set up is probably PXE netbooting. Untar the
-file <filename>netboot/pxeboot.tar.gz</filename> into
-<filename>/var/lib/tftpboot</filename> or
-wherever is appropriate for your tftp server. Set up your DHCP server to pass
-filename <filename>/pxelinux.0</filename> to clients, and it with luck
-everything will just work.
-For detailed instructions, see <xref linkend="install-tftp" />
-
-</para>
-  </sect2>
-  
-  <sect2 id="howto-getting-images-hard-disk">
-  <title>Booting from hard disk</title>
-<para>
-
-It's possible to boot the installer using no removable media, but just an
-existing hard disk, which can have a different OS on it. Download
-<filename>hd-media/initrd.gz</filename>, <filename>hd-media/vmlinuz</filename>,
-and a Debian CD image to the top-level directory of the hard disk. Make sure
-that the CD image has a filename ending in ".iso". Now it's just a matter of
-booting linux with the initrd.
-<phrase arch="x86">
-<xref linkend="boot-initrd" /> explains one way to do it.
-</phrase>
-
-</para>
-  </sect2>
- </sect1>
-
- <sect1 id="howto-installation">
-<title>Installation</title>
-<para>
-
-Once the installer starts, you will be greeted with an initial screen. Press
-&enterkey; to boot, or read the instructions for other boot
-methods and parameters (see <xref linkend="boot-parms" />).
-<phrase arch="x86">
-If you want a 2.6 kernel, type <userinput>linux26</userinput> at the
-<prompt>boot:</prompt> prompt.
-<footnote><para>
-
-The 2.6 kernel is available for most boot methods, but not when booting from
-a floppy.
- 
-</para></footnote>
-</phrase>
-
-</para><para>
-
-After a while you will be asked to select your language. Use the arrow keys
-to pick a language and press &enterkey; to continue. Next you'll be asked to
-select your country, with the choices including countries where your
-language is spoken. If it's not on the short list, a list of all the
-countries in the world is available.
-
-</para><para>
-
-You may be asked to confirm your keyboard layout. Choose the default unless
-you know better.
-
-</para><para>
-
-Now sit back while debian-installer detects some of your hardware, and
-loads the rest of itself from CD, floppy, USB, etc.
-
-</para><para>
-
-Next the installer will try to detect your network hardware and set up
-networking by DHCP. If you are not on a network or do not have DHCP, you
-will be given the opportunity to configure the network manually.
-
-</para><para>
-
-Now it is time to partition your disks. First you will be given the
-opportunity to automatically partition either an entire drive, or free
-space on a drive. This is recommended for new users or anyone in a hurry,
-but if you do not want to autopartition, choose manual from the menu.
-
-</para><para>
-
-On the next screen you will see your partition table, how the partitions
-will be formatted, and where they will be mounted. Select a partition to
-modify or delete it. If you did automatic partitioning, you should just be
-able to choose "Finished partitioning" from the menu to use what it set up.
-Remember to assign at least one partition for swap space and to mount a
-partition on <filename>/</filename>. <xref linkend="partitioning" /> has more information
-about partitioning.
-
-</para><para>
-
-Now &d-i; formats your partitions and starts to install the base system, 
-which can take a while. That is followed by installing a kernel.
-
-</para><para>
-
-The last step is to install a boot loader. If the installer detects
-other operating systems on your computer, it will add them to the boot menu
-and let you know.
-<phrase arch="x86">By default GRUB will be installed to the master boot
-record of the first harddrive, which is generally a good choice. You'll be
-given the opportunity to override that choice and install it elsewhere.
-</phrase>
-
-</para><para>
-
-&d-i; will now tell you that the installation has
-finished. Remove the cdrom or other boot media and hit &enterkey;
-to reboot your machine. It should boot up into the next stage of the install
-process, which is explained in <xref linkend="boot-new" />.
-
-</para><para>
-
-If you need more information on the install process, see
-<xref linkend="d-i-intro" />.
-
-</para>
- </sect1>
-
- <sect1 id="howto-installation-report">
- <title>Send us an installation report</title>
-<para>
-
-If you successfully managed an installation with &d-i;,
-please take time to provide us with a report. There is a template
-named <filename>install-report.template</filename> in the
-<filename>/root</filename> directory of a freshly
-installed system. Please fill it out and file it as a bug against the
-package <classname>installation-reports</classname>, as explained in
-<xref linkend="submit-bug" />.
-
-</para><para>
-
-If you did not reach base-config or ran into other trouble, you
-probably found a bug in debian-installer. To improve the installer it
-is necessary that we know about them, so please take the time to
-report them. You can use an installation report to report problems;
-if the install completely fails, see <xref linkend="problem-report" />.
-
-</para>
- </sect1>
-
- <sect1 id="howto-installation-finally">
- <title>And finally..</title>
-<para>
-
-We hope that your Debian installation is pleasant and that you find Debian
-useful. You might want to read <xref linkend="post-install" />.
-
-</para>
- </sect1>
-</appendix>