diff options
Diffstat (limited to 'ca/boot-installer/mips.xml')
-rw-r--r-- | ca/boot-installer/mips.xml | 68 |
1 files changed, 35 insertions, 33 deletions
diff --git a/ca/boot-installer/mips.xml b/ca/boot-installer/mips.xml index f237aa957..19daba8de 100644 --- a/ca/boot-installer/mips.xml +++ b/ca/boot-installer/mips.xml @@ -1,82 +1,84 @@ <!-- retain these comments for translator revision tracking --> -<!-- original version: 24663 untranslated --> +<!-- original version: 24663 --> - <sect2 arch="mips" id="boot-tftp"><title>Booting with TFTP</title> + <sect2 arch="mips" id="boot-tftp"><title>Arrencada amb el TFTP</title> <sect3> - <title>SGI Indys TFTP Booting</title> + <title>Arrencada amb el TFTP en SGI Indy</title> <para> -After entering the command monitor use +Després d'entrar al monitor d'ordres, utilitzeu <informalexample><screen> bootp(): </screen></informalexample> -on SGI Indys to boot linux and to begin installation of the Debian -Software. In order to make this -work you may have to unset the <envar>netaddr</envar> environment -variable. Type +en màquines SGI Indy per arrencar linux i començar la instal·lació +del programari de Debian. Per tal que això funcioni, potser haureu de +desactivar la variable d'entorn <envar>netaddr</envar>. Per fer-ho +teclegeu <informalexample><screen> unsetenv netaddr </screen></informalexample> -in the command monitor to do this. +al monitor d'ordres. </para> </sect3> <sect3> - <title>Broadcom BCM91250A TFTP Booting</title> + <title>Arrencada amb el TFTP en Broadcom BCM91250A</title> <para> -On the Broadcom BCM91250A evaluation board, you have to load the SiByl boot -loader via TFTP which will then load and start the Debian installer. In -most cases, you will first obtain an IP address via DHCP but it is also -possible to configure a static address. In order to use DHCP, you can -enter the following command on the CFE prompt: +En plaques d'avaluació Broadcom BCM91250A, haureu de carregar el +carregador d'arrencada SiByl, i aquest s'encarregarà aleshores d'iniciar +l'instal·lador de Debian. En la majoria de casos, primer obtindreu +l'adreça IP mitjançant DHCP, però també és possible configurar una +adreça estàtica. Per usar DHCP, podeu introduir l'ordre següent a +l'indicador CFE: <informalexample><screen> ifconfig eth0 -auto </screen></informalexample> -Once you have obtained an IP address, you can load SiByl with the following -command: +Una vegada heu obtingut una adreça IP, podeu carregar SiByl amb l'ordre +següent: <informalexample><screen> boot 192.168.1.1:/boot/sibyl </screen></informalexample> -You need to substitute the IP address listed in this example with either -the name or the IP address of your TFTP server. Once you issue this -command, the installer will be loaded automatically. +Haureu de substituir l'adreça IP de l'exemple pel nom o l'adreça del +vostre servidor TFTP. Tan bon punt s'executi l'ordre, l'instal·lador +es carregarà automàticament. </para> </sect3> </sect2> - <sect2 arch="mips"><title>Boot Parameters</title> + <sect2 arch="mips"><title>Paràmetres d'arrencada</title> <sect3> - <title>SGI Indys TFTP Booting</title> + <title>Arrencada amb el TFTP en SGI Indy</title> <para> -On SGI Indys you can append boot parameters to the -<command>bootp():</command> command in the command monitor. +En SGI Indy, podeu afegir paràmetres d'arrencada a l'ordre +<command>bootp():</command> del monitor d'ordres. </para><para> -Following the <command>bootp():</command> command you can give the -path and name of the file to boot if you did not give an explicit name -via your bootp/dhcp server. Example: +Seguint l'ordre <command>bootp():</command>, podeu indicar el camí i el +nom del fitxer per arrencar en cas que no ho hàgiu fet explícitament +mitjançant el servidor bootp/dhcp. Exemple: <informalexample><screen> bootp():/boot/tftpboot.img </screen></informalexample> -Further kernel parameters can be passed via <command>append</command>: +També es poden passar altres paràmetres del nucli amb +<command>append</command>: <informalexample><screen> bootp(): append="root=/dev/sda1" @@ -86,13 +88,13 @@ bootp(): append="root=/dev/sda1" </sect3> <sect3> - <title>Broadcom BCM91250A TFTP Booting</title> + <title>Arrencada amb el TFTP en Broadcom BCM91250A</title> <para> -You cannot pass any boot parameters directly from the CFE prompt. Instead, -you have to edit the <filename>/boot/sibyl.conf</filename> file on the TFTP -server and add your parameters to the <replaceable>extra_args</replaceable> -variable. +No podeu passar cap paràmetre d'arrencada directament des de +l'indicador CFE. En comptes d'això, haureu d'editar el fitxer +<filename>/boot/sibyl.conf</filename> al servidor TFTP i afegir els +paràmetres desitjats a la variable <replaceable>extra_args</replaceable>. </para> </sect3> |