[SILENT_COMMIT] Update of POT and PO files for the manual

1 files changed, 139 insertions, 134 deletions

diff --git a/po/zh_TW/using-d-i.po b/po/zh_TW/using-d-i.po
index 842e04e90..bd44f6898 100644
--- a/po/zh_TW/using-d-i.po
+++ b/po/zh_TW/using-d-i.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2008-03-16 00:10+0000\n"
+"POT-Creation-Date: 2008-03-23 00:10+0000\n"
 "PO-Revision-Date: 2005-07-18 14:26+0800\n"
 "Last-Translator: Jhang, Jia-Wei <dreamcrer@gmail.com>\n"
 "Language-Team: debian-chinese-big5 <debian-chinese-big5@lists.debian.org>\n"
@@ -2999,39 +2999,44 @@ msgstr ""
 #, no-c-format
 msgid ""
 "Some tasks may be pre-selected based on the characteristics of the computer "
-"you are installing. If you disagree with these selections you can un-select "
-"the tasks. You can even opt to install no tasks at all at this point."
+"you are installing. If you disagree with these selections you can deselect "
+"them. You can even opt to install no tasks at all at this point."
 msgstr ""
 
 #. Tag: para
 #: using-d-i.xml:2230
 #, no-c-format
 msgid ""
-"The <quote>Desktop environment</quote> task will install the GNOME desktop "
-"environment. The options offered by the installer currently do not allow to "
-"select a different desktop environment such as for example KDE."
+"Unless you are using the special KDE or Xfce CDs, the <quote>Desktop "
+"environment</quote> task will install the GNOME desktop environment."
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2238
+#: using-d-i.xml:2237
 #, no-c-format
 msgid ""
-"It is possible to get the installer to install KDE by using preseeding (see "
-"<xref linkend=\"preseed-pkgsel\"/>) or by adding <literal>tasks=\"standard, "
-"kde-desktop\"</literal> at the boot prompt when starting the "
-"installer<footnote> <para> A more lightweight Xfce desktop environment can "
-"be selected by using <literal>xfce-desktop</literal> instead of <literal>kde-"
-"desktop</literal>. If you are installing on a laptop, you could also add "
-"<literal>laptop</literal> to the tasks to be installed. </para> </footnote>. "
-"However, this will only work if the packages needed for KDE are actually "
-"available. If you are installing using a full CD image, they will need to be "
-"downloaded from a mirror as KDE packages are not included on the first full "
-"CD; installing KDE this way should work fine if you are using a DVD image or "
-"any other installation method."
+"It is not possible to interactively select a different desktop during the "
+"installation. However, it <emphasis>is</emphasis> possible to get &d-i; to "
+"install a KDE desktop environment instead of GNOME by using preseeding (see "
+"<xref linkend=\"preseed-pkgsel\"/>) or by adding the parameter "
+"<literal>desktop=kde</literal> at the boot prompt when starting the "
+"installer. Alternatively the more lightweight Xfce desktop environment can "
+"be selected by using <literal>desktop=xfce</literal>."
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2258
+#: using-d-i.xml:2247
+#, no-c-format
+msgid ""
+"Note that this will only work if the packages needed for KDE or Xfce are "
+"actually available. If you are installing using a single full CD image, they "
+"will need to be downloaded from a mirror as most needed packages are only "
+"included on later CDs; installing KDE or Xfce this way should work fine if "
+"you are using a DVD image or any other installation method."
+msgstr ""
+
+#. Tag: para
+#: using-d-i.xml:2255
 #, no-c-format
 msgid ""
 "The various server tasks will install software roughly as follows. DNS "
@@ -3043,7 +3048,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2270
+#: using-d-i.xml:2267
 #, fuzzy, no-c-format
 msgid ""
 "Once you've selected your tasks, select &BTN-CONT;. At this point, "
@@ -3054,7 +3059,7 @@ msgstr ""
 "<command>aptitude</command> 將安裝您選中的軟體套件。"
 
 #. Tag: para
-#: using-d-i.xml:2277
+#: using-d-i.xml:2274
 #, no-c-format
 msgid ""
 "In the standard user interface of the installer, you can use the space bar "
@@ -3062,7 +3067,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2283
+#: using-d-i.xml:2280
 #, no-c-format
 msgid ""
 "You should be aware that especially the Desktop task is very large. "
@@ -3074,7 +3079,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2292
+#: using-d-i.xml:2289
 #, no-c-format
 msgid ""
 "Even when packages are included on the CD-ROM, the installer may still "
@@ -3086,7 +3091,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2301
+#: using-d-i.xml:2298
 #, no-c-format
 msgid ""
 "Each package you selected with <command>tasksel</command> is downloaded, "
@@ -3096,13 +3101,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2314
+#: using-d-i.xml:2311
 #, no-c-format
 msgid "Making Your System Bootable"
 msgstr "使系統可開機"
 
 #. Tag: para
-#: using-d-i.xml:2316
+#: using-d-i.xml:2313
 #, fuzzy, no-c-format
 msgid ""
 "If you are installing a diskless workstation, obviously, booting off the "
@@ -3115,13 +3120,13 @@ msgstr ""
 "linkend=\"boot-dev-select-sun\"/>。</phrase>"
 
 #. Tag: title
-#: using-d-i.xml:2331
+#: using-d-i.xml:2328
 #, no-c-format
 msgid "Detecting other operating systems"
 msgstr "偵測其他的作業系統"
 
 #. Tag: para
-#: using-d-i.xml:2333
+#: using-d-i.xml:2330
 #, no-c-format
 msgid ""
 "Before a boot loader is installed, the installer will attempt to probe for "
@@ -3135,7 +3140,7 @@ msgstr ""
 "腦也將設定為可以啟動其他作業系統。"
 
 #. Tag: para
-#: using-d-i.xml:2341
+#: using-d-i.xml:2338
 #, no-c-format
 msgid ""
 "Note that multiple operating systems booting on a single machine is still "
@@ -3149,13 +3154,13 @@ msgstr ""
 "boot-loader 的文件以瞭解更多資訊。"
 
 #. Tag: title
-#: using-d-i.xml:2359
+#: using-d-i.xml:2356
 #, no-c-format
 msgid "Install <command>aboot</command> on a Hard Disk"
 msgstr "安裝 <command>aboot</command> 到硬碟上"
 
 #. Tag: para
-#: using-d-i.xml:2360
+#: using-d-i.xml:2357
 #, fuzzy, no-c-format
 msgid ""
 "If you have booted from SRM and you select this option, the installer will "
@@ -3174,13 +3179,13 @@ msgstr ""
 "您在安裝 Debian 的磁碟上裝有不同的作業系統，您將不得不從軟碟啟動 GNU/Linux。"
 
 #. Tag: title
-#: using-d-i.xml:2380
+#: using-d-i.xml:2377
 #, no-c-format
 msgid "<command>palo</command>-installer"
 msgstr "<command>palo</command>-installer"
 
 #. Tag: para
-#: using-d-i.xml:2381
+#: using-d-i.xml:2378
 #, no-c-format
 msgid ""
 "The bootloader on PA-RISC is <quote>palo</quote>. <command>PALO</command> is "
@@ -3195,19 +3200,19 @@ msgstr ""
 "<command>PALO</command> 能真正地讀 Linux 分割區。"
 
 #. Tag: para
-#: using-d-i.xml:2390
+#: using-d-i.xml:2387
 #, no-c-format
 msgid "hppa FIXME ( need more info )"
 msgstr "hppa FIXME ( need more info )"
 
 #. Tag: title
-#: using-d-i.xml:2402
+#: using-d-i.xml:2399
 #, no-c-format
 msgid "Install the <command>Grub</command> Boot Loader on a Hard Disk"
 msgstr "安裝 <command>Grub</command> Boot Loader 到硬碟上"
 
 #. Tag: para
-#: using-d-i.xml:2404
+#: using-d-i.xml:2401
 #, fuzzy, no-c-format
 msgid ""
 "The main &architecture; boot loader is called <quote>grub</quote>. Grub is a "
@@ -3218,7 +3223,7 @@ msgstr ""
 "定的 boot-loader，它對新手來說是個不錯的預設選擇。對老鳥來說，它也同樣適合。"
 
 #. Tag: para
-#: using-d-i.xml:2410
+#: using-d-i.xml:2407
 #, no-c-format
 msgid ""
 "By default, grub will be installed into the Master Boot Record (MBR), where "
@@ -3230,7 +3235,7 @@ msgstr ""
 "訊，請參閱 grub 的手冊。"
 
 #. Tag: para
-#: using-d-i.xml:2416
+#: using-d-i.xml:2413
 #, fuzzy, no-c-format
 msgid ""
 "If you do not want to install grub, use the &BTN-GOBACK; button to get to "
@@ -3242,13 +3247,13 @@ msgstr ""
 "請參閱 grub 的手冊。"
 
 #. Tag: title
-#: using-d-i.xml:2429
+#: using-d-i.xml:2426
 #, no-c-format
 msgid "Install the <command>LILO</command> Boot Loader on a Hard Disk"
 msgstr "安裝 <command>LILO</command> Boot Loader 到硬碟上"
 
 #. Tag: para
-#: using-d-i.xml:2431
+#: using-d-i.xml:2428
 #, no-c-format
 msgid ""
 "The second &architecture; boot loader is called <quote>LILO</quote>. It is "
@@ -3264,7 +3269,7 @@ msgstr ""
 "ulink>。"
 
 #. Tag: para
-#: using-d-i.xml:2441
+#: using-d-i.xml:2438
 #, no-c-format
 msgid ""
 "Currently the LILO installation will only create menu entries for other "
@@ -3277,7 +3282,7 @@ msgstr ""
 "統。"
 
 #. Tag: para
-#: using-d-i.xml:2449
+#: using-d-i.xml:2446
 #, fuzzy, no-c-format
 msgid ""
 "&d-i; offers you three choices on where to install the <command>LILO</"
@@ -3285,13 +3290,13 @@ msgid ""
 msgstr "&d-i; 提供給您三種選擇來安裝 <command>LILO</command> boot-loader："
 
 #. Tag: term
-#: using-d-i.xml:2456
+#: using-d-i.xml:2453
 #, no-c-format
 msgid "Master Boot Record (MBR)"
 msgstr "主開機區 (MBR)"
 
 #. Tag: para
-#: using-d-i.xml:2456
+#: using-d-i.xml:2453
 #, no-c-format
 msgid ""
 "This way the <command>LILO</command> will take complete control of the boot "
@@ -3299,13 +3304,13 @@ msgid ""
 msgstr "這種方式 <command>LILO</command> 將完全控制開機過程。"
 
 #. Tag: term
-#: using-d-i.xml:2463
+#: using-d-i.xml:2460
 #, no-c-format
 msgid "new Debian partition"
 msgstr "新 Debian 分割區"
 
 #. Tag: para
-#: using-d-i.xml:2463
+#: using-d-i.xml:2460
 #, no-c-format
 msgid ""
 "Choose this if you want to use another boot manager. <command>LILO</command> "
@@ -3316,13 +3321,13 @@ msgstr ""
 "Debian 分割區的起始位置，並能作為第二 boot loader。"
 
 #. Tag: term
-#: using-d-i.xml:2472
+#: using-d-i.xml:2469
 #, no-c-format
 msgid "Other choice"
 msgstr "其它選擇"
 
 #. Tag: para
-#: using-d-i.xml:2472
+#: using-d-i.xml:2469
 #, fuzzy, no-c-format
 msgid ""
 "Useful for advanced users who want to install <command>LILO</command> "
@@ -3337,7 +3342,7 @@ msgstr ""
 "或 <filename>/dev/sda</filename>。"
 
 #. Tag: para
-#: using-d-i.xml:2482
+#: using-d-i.xml:2479
 #, fuzzy, no-c-format
 msgid ""
 "If you can no longer boot into Windows 9x (or DOS) after this step, you'll "
@@ -3352,13 +3357,13 @@ msgstr ""
 "<xref linkend=\"reactivating-win\"/>。"
 
 #. Tag: title
-#: using-d-i.xml:2498
+#: using-d-i.xml:2495
 #, no-c-format
 msgid "Install the <command>ELILO</command> Boot Loader on a Hard Disk"
 msgstr "安裝 <command>ELILO</command> Boot Loader 到硬碟"
 
 #. Tag: para
-#: using-d-i.xml:2500
+#: using-d-i.xml:2497
 #, fuzzy, no-c-format
 msgid ""
 "The &architecture; boot loader is called <quote>elilo</quote>. It is modeled "
@@ -3383,7 +3388,7 @@ msgstr ""
 "行以掛載和啟動 Linux 核心。"
 
 #. Tag: para
-#: using-d-i.xml:2516
+#: using-d-i.xml:2513
 #, no-c-format
 msgid ""
 "The <quote>elilo</quote> configuration and installation is done as the last "
@@ -3398,13 +3403,13 @@ msgstr ""
 "是與 <emphasis>root</emphasis> 檔案系統相同的磁碟。"
 
 #. Tag: title
-#: using-d-i.xml:2528
+#: using-d-i.xml:2525
 #, no-c-format
 msgid "Choose the correct partition!"
 msgstr "選擇正確的分割區！"
 
 #. Tag: para
-#: using-d-i.xml:2530
+#: using-d-i.xml:2527
 #, fuzzy, no-c-format
 msgid ""
 "The criteria for selecting a partition is that it is FAT format filesystem "
@@ -3420,13 +3425,13 @@ msgstr ""
 "割區，這將清除以前的所有內容！"
 
 #. Tag: title
-#: using-d-i.xml:2545
+#: using-d-i.xml:2542
 #, no-c-format
 msgid "EFI Partition Contents"
 msgstr "EFI 分割區內容"
 
 #. Tag: para
-#: using-d-i.xml:2547
+#: using-d-i.xml:2544
 #, no-c-format
 msgid ""
 "The EFI partition is a FAT filesystem format partition on one of the hard "
@@ -3452,13 +3457,13 @@ msgstr ""
 "間，系統更新或重新設定，檔案系統中也許會有其他檔案。"
 
 #. Tag: filename
-#: using-d-i.xml:2569
+#: using-d-i.xml:2566
 #, no-c-format
 msgid "elilo.conf"
 msgstr "elilo.conf"
 
 #. Tag: para
-#: using-d-i.xml:2570
+#: using-d-i.xml:2567
 #, no-c-format
 msgid ""
 "This is the configuration file read by the boot loader when it starts. It is "
@@ -3469,13 +3474,13 @@ msgstr ""
 "filename> 以同檔名複製到 EFI 分割區的檔案。"
 
 #. Tag: filename
-#: using-d-i.xml:2579
+#: using-d-i.xml:2576
 #, no-c-format
 msgid "elilo.efi"
 msgstr "elilo.efi"
 
 #. Tag: para
-#: using-d-i.xml:2580
+#: using-d-i.xml:2577
 #, no-c-format
 msgid ""
 "This is the boot loader program that the <quote>EFI Boot Manager</quote> "
@@ -3488,13 +3493,13 @@ msgstr ""
 "<quote>EFI Boot Manager</quote> 指令選單。"
 
 #. Tag: filename
-#: using-d-i.xml:2590
+#: using-d-i.xml:2587
 #, no-c-format
 msgid "initrd.img"
 msgstr "initrd.img"
 
 #. Tag: para
-#: using-d-i.xml:2591
+#: using-d-i.xml:2588
 #, no-c-format
 msgid ""
 "This is the initial root filesystem used to boot the kernel. It is a copy of "
@@ -3507,13 +3512,13 @@ msgstr ""
 "filename> 符號鏈結 <filename>/initrd.img</filename> 指向的檔案。"
 
 #. Tag: filename
-#: using-d-i.xml:2603
+#: using-d-i.xml:2600
 #, no-c-format
 msgid "readme.txt"
 msgstr "readme.txt"
 
 #. Tag: para
-#: using-d-i.xml:2604
+#: using-d-i.xml:2601
 #, no-c-format
 msgid ""
 "This is a small text file warning you that the contents of the directory are "
@@ -3524,13 +3529,13 @@ msgstr ""
 "本地修改在下次 <filename>/usr/sbin/elilo</filename> 執行時將丟失。"
 
 #. Tag: filename
-#: using-d-i.xml:2614
+#: using-d-i.xml:2611
 #, no-c-format
 msgid "vmlinuz"
 msgstr "vmlinuz"
 
 #. Tag: para
-#: using-d-i.xml:2615
+#: using-d-i.xml:2612
 #, no-c-format
 msgid ""
 "This is the compressed kernel itself. It is a copy of the file referenced in "
@@ -3543,13 +3548,13 @@ msgstr ""
 "<filename>/vmlinuz</filename> 指向的檔案。"
 
 #. Tag: title
-#: using-d-i.xml:2635
+#: using-d-i.xml:2632
 #, no-c-format
 msgid "<command>arcboot</command>-installer"
 msgstr "<command>arcboot</command>-installer"
 
 #. Tag: para
-#: using-d-i.xml:2636
+#: using-d-i.xml:2633
 #, fuzzy, no-c-format
 msgid ""
 "The boot loader on SGI machines is <command>arcboot</command>. It has to be "
@@ -3589,13 +3594,13 @@ msgstr ""
 "</screen></informalexample> ，然後鍵入 <command>boot</command>。"
 
 #. Tag: replaceable
-#: using-d-i.xml:2655
+#: using-d-i.xml:2652
 #, no-c-format
 msgid "scsi"
 msgstr "scsi"
 
 #. Tag: para
-#: using-d-i.xml:2656
+#: using-d-i.xml:2653
 #, no-c-format
 msgid ""
 "is the SCSI bus to be booted from, this is <userinput>0</userinput> for the "
@@ -3603,13 +3608,13 @@ msgid ""
 msgstr "是啟動的 SCSI 匯流排， <userinput>0</userinput> 為主機板內建控制器"
 
 #. Tag: replaceable
-#: using-d-i.xml:2664
+#: using-d-i.xml:2661
 #, no-c-format
 msgid "disk"
 msgstr "disk"
 
 #. Tag: para
-#: using-d-i.xml:2665
+#: using-d-i.xml:2662
 #, no-c-format
 msgid ""
 "is the SCSI ID of the hard disk on which <command>arcboot</command> is "
@@ -3618,13 +3623,13 @@ msgstr "是硬碟的 SCSI ID，<command>arcboot</command> 安裝在其上"
 
 # index.docbook:1643, index.docbook:1712
 #. Tag: replaceable
-#: using-d-i.xml:2673 using-d-i.xml:2742
+#: using-d-i.xml:2670 using-d-i.xml:2739
 #, no-c-format
 msgid "partnr"
 msgstr "partnr"
 
 #. Tag: para
-#: using-d-i.xml:2674
+#: using-d-i.xml:2671
 #, no-c-format
 msgid ""
 "is the number of the partition on which <filename>/etc/arcboot.conf</"
@@ -3632,13 +3637,13 @@ msgid ""
 msgstr "<filename>/etc/arcboot.conf</filename> 所處分割區編號。"
 
 #. Tag: replaceable
-#: using-d-i.xml:2682
+#: using-d-i.xml:2679
 #, no-c-format
 msgid "config"
 msgstr "config"
 
 #. Tag: para
-#: using-d-i.xml:2683
+#: using-d-i.xml:2680
 #, no-c-format
 msgid ""
 "is the name of the configuration entry in <filename>/etc/arcboot.conf</"
@@ -3648,13 +3653,13 @@ msgstr ""
 "<quote>linux</quote> 。"
 
 #. Tag: title
-#: using-d-i.xml:2704
+#: using-d-i.xml:2701
 #, no-c-format
 msgid "<command>delo</command>-installer"
 msgstr "<command>delo</command>-installer"
 
 #. Tag: para
-#: using-d-i.xml:2705
+#: using-d-i.xml:2702
 #, no-c-format
 msgid ""
 "The boot loader on DECstations is <command>DELO</command>. It has to be "
@@ -3680,13 +3685,13 @@ msgstr ""
 "</screen></informalexample> 。"
 
 #. Tag: replaceable
-#: using-d-i.xml:2724
+#: using-d-i.xml:2721
 #, no-c-format
 msgid "<replaceable>#</replaceable>"
 msgstr "<replaceable>#</replaceable>"
 
 #. Tag: para
-#: using-d-i.xml:2725
+#: using-d-i.xml:2722
 #, no-c-format
 msgid ""
 "is the TurboChannel device to be booted from, on most DECstations this is "
@@ -3696,20 +3701,20 @@ msgstr ""
 "<userinput>3</userinput>"
 
 #. Tag: replaceable
-#: using-d-i.xml:2733
+#: using-d-i.xml:2730
 #, no-c-format
 msgid "<replaceable>id</replaceable>"
 msgstr "<replaceable>id</replaceable>"
 
 #. Tag: para
-#: using-d-i.xml:2734
+#: using-d-i.xml:2731
 #, no-c-format
 msgid ""
 "is the SCSI ID of the hard disk on which <command>DELO</command> is installed"
 msgstr "<command>DELO</command> 所處的硬碟的 SCSI ID。"
 
 #. Tag: para
-#: using-d-i.xml:2743
+#: using-d-i.xml:2740
 #, no-c-format
 msgid ""
 "is the number of the partition on which <filename>/etc/delo.conf</filename> "
@@ -3717,13 +3722,13 @@ msgid ""
 msgstr "<filename>/etc/delo.conf</filename> 所處的分割區號。"
 
 #. Tag: replaceable
-#: using-d-i.xml:2751
+#: using-d-i.xml:2748
 #, no-c-format
 msgid "name"
 msgstr "name"
 
 #. Tag: para
-#: using-d-i.xml:2752
+#: using-d-i.xml:2749
 #, no-c-format
 msgid ""
 "is the name of the configuration entry in <filename>/etc/delo.conf</"
@@ -3733,7 +3738,7 @@ msgstr ""
 "quote>"
 
 #. Tag: para
-#: using-d-i.xml:2762
+#: using-d-i.xml:2759
 #, no-c-format
 msgid ""
 "In case <filename>/etc/delo.conf</filename> is on the first partition on the "
@@ -3743,19 +3748,19 @@ msgstr ""
 "預設的開機設定，但也可以用"
 
 #. Tag: screen
-#: using-d-i.xml:2768
+#: using-d-i.xml:2765
 #, no-c-format
 msgid "<userinput>boot #/rz<replaceable>id</replaceable></userinput>"
 msgstr "<userinput>boot #/rz<replaceable>id</replaceable></userinput>"
 
 #. Tag: title
-#: using-d-i.xml:2778
+#: using-d-i.xml:2775
 #, no-c-format
 msgid "Install <command>Yaboot</command> on a Hard Disk"
 msgstr "安裝 <command>Yaboot</command> 至硬碟"
 
 #. Tag: para
-#: using-d-i.xml:2779
+#: using-d-i.xml:2776
 #, no-c-format
 msgid ""
 "Newer (mid 1998 and on) PowerMacs use <command>yaboot</command> as their "
@@ -3773,13 +3778,13 @@ msgstr ""
 "將設為啟動 &debian;。"
 
 #. Tag: title
-#: using-d-i.xml:2797
+#: using-d-i.xml:2794
 #, no-c-format
 msgid "Install <command>Quik</command> on a Hard Disk"
 msgstr "安裝 <command>Quik</command> 至硬碟"
 
 #. Tag: para
-#: using-d-i.xml:2798
+#: using-d-i.xml:2795
 #, no-c-format
 msgid ""
 "The boot loader for OldWorld Power Macintosh machines is <command>quik</"
@@ -3793,13 +3798,13 @@ msgstr ""
 "作。"
 
 #. Tag: title
-#: using-d-i.xml:2814
+#: using-d-i.xml:2811
 #, no-c-format
 msgid "<command>zipl</command>-installer"
 msgstr "<command>zipl</command>-installer"
 
 #. Tag: para
-#: using-d-i.xml:2815
+#: using-d-i.xml:2812
 #, no-c-format
 msgid ""
 "The boot loader on &arch-title; is <quote>zipl</quote>. <command>ZIPL</"
@@ -3814,13 +3819,13 @@ msgstr ""
 "Commands</quote>，它位於 IBM 的 developerWorks 網站 <command>ZIPL</command>。"
 
 #. Tag: title
-#: using-d-i.xml:2832
+#: using-d-i.xml:2829
 #, no-c-format
 msgid "Install the <command>SILO</command> Boot Loader on a Hard Disk"
 msgstr "安裝 <command>SILO</command> Boot Loader 到硬碟"
 
 #. Tag: para
-#: using-d-i.xml:2834
+#: using-d-i.xml:2831
 #, no-c-format
 msgid ""
 "The standard &architecture; boot loader is called <quote>silo</quote>. It is "
@@ -3848,13 +3853,13 @@ msgstr ""
 "SunOS/Solaris 的系統很有用。"
 
 #. Tag: title
-#: using-d-i.xml:2859
+#: using-d-i.xml:2856
 #, no-c-format
 msgid "Continue Without Boot Loader"
 msgstr "不使用 boot-loader 繼續進行"
 
 #. Tag: para
-#: using-d-i.xml:2861
+#: using-d-i.xml:2858
 #, no-c-format
 msgid ""
 "This option can be used to complete the installation even when no boot "
@@ -3870,7 +3875,7 @@ msgstr ""
 "存在於機器上，以用於啟動 GNU/Linux。</phrase>"
 
 #. Tag: para
-#: using-d-i.xml:2870
+#: using-d-i.xml:2867
 #, no-c-format
 msgid ""
 "If you plan to manually configure your bootloader, you should check the name "
@@ -3889,13 +3894,13 @@ msgstr ""
 "filename> 到一個獨立的分割區，還需要 <filename>/boot</filename> 檔案系統。"
 
 #. Tag: title
-#: using-d-i.xml:2887
+#: using-d-i.xml:2884
 #, fuzzy, no-c-format
 msgid "Finishing the Installation"
 msgstr "完成安裝並重開機"
 
 #. Tag: para
-#: using-d-i.xml:2888
+#: using-d-i.xml:2885
 #, fuzzy, no-c-format
 msgid ""
 "This is the last step in the Debian installation process during which the "
@@ -3904,13 +3909,13 @@ msgid ""
 msgstr "在啟動新 Debian 之前還有一些最後工作，主要是 &d-i; 之後的整理。"
 
 #. Tag: title
-#: using-d-i.xml:2901
+#: using-d-i.xml:2898
 #, fuzzy, no-c-format
 msgid "Setting the System Clock"
 msgstr "安裝基本系統"
 
 #. Tag: para
-#: using-d-i.xml:2903
+#: using-d-i.xml:2900
 #, no-c-format
 msgid ""
 "The installer may ask you if the computer's clock is set to UTC. Normally "
@@ -3920,7 +3925,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2910
+#: using-d-i.xml:2907
 #, no-c-format
 msgid ""
 "In expert mode you will always be able to choose whether or not the clock is "
@@ -3932,7 +3937,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2921
+#: using-d-i.xml:2918
 #, no-c-format
 msgid ""
 "At this point &d-i; will also attempt to save the current time to the "
@@ -3941,13 +3946,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2936
+#: using-d-i.xml:2933
 #, fuzzy, no-c-format
 msgid "Reboot the System"
 msgstr "安裝基本系統"
 
 #. Tag: para
-#: using-d-i.xml:2938
+#: using-d-i.xml:2935
 #, fuzzy, no-c-format
 msgid ""
 "You will be prompted to remove the boot media (CD, floppy, etc) that you "
@@ -3958,7 +3963,7 @@ msgstr ""
 "碟等)。安裝程式將完成最後的工作，然後啟動您的新 Debian 系統。"
 
 #. Tag: para
-#: using-d-i.xml:2944
+#: using-d-i.xml:2941
 #, fuzzy, no-c-format
 msgid ""
 "After a final prompt the system will be halted because rebooting is not "
@@ -3971,13 +3976,13 @@ msgstr ""
 "Linux，它在安裝步驟第一步裡被選做根檔案系統。"
 
 #. Tag: title
-#: using-d-i.xml:2957
+#: using-d-i.xml:2954
 #, no-c-format
 msgid "Miscellaneous"
 msgstr "雜項"
 
 #. Tag: para
-#: using-d-i.xml:2958
+#: using-d-i.xml:2955
 #, no-c-format
 msgid ""
 "The components listed in this section are usually not involved in the "
@@ -3988,13 +3993,13 @@ msgstr ""
 "題。"
 
 #. Tag: title
-#: using-d-i.xml:2971
+#: using-d-i.xml:2968
 #, no-c-format
 msgid "Saving the installation logs"
 msgstr "保存安裝記錄"
 
 #. Tag: para
-#: using-d-i.xml:2973
+#: using-d-i.xml:2970
 #, fuzzy, no-c-format
 msgid ""
 "If the installation is successful, the logfiles created during the "
@@ -4005,7 +4010,7 @@ msgstr ""
 "<filename>/var/log/debian-installer/</filename>。"
 
 #. Tag: para
-#: using-d-i.xml:2980
+#: using-d-i.xml:2977
 #, fuzzy, no-c-format
 msgid ""
 "Choosing <guimenuitem>Save debug logs</guimenuitem> from the main menu "
@@ -4019,13 +4024,13 @@ msgstr ""
 "用於報告的附件。"
 
 #. Tag: title
-#: using-d-i.xml:3000
+#: using-d-i.xml:2997
 #, no-c-format
 msgid "Using the Shell and Viewing the Logs"
 msgstr "使用 Shell 查看記錄"
 
 #. Tag: para
-#: using-d-i.xml:3002
+#: using-d-i.xml:2999
 #, no-c-format
 msgid ""
 "There are several methods you can use to get a shell while running an "
@@ -4041,13 +4046,13 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3020
+#: using-d-i.xml:3017
 #, no-c-format
 msgid "For the graphical installer see also <xref linkend=\"gtk-using\"/>."
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3024
+#: using-d-i.xml:3021
 #, no-c-format
 msgid ""
 "If you cannot switch consoles, there is also an <guimenuitem>Execute a "
@@ -4058,7 +4063,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3032
+#: using-d-i.xml:3029
 #, fuzzy, no-c-format
 msgid ""
 "At this point you are booted from the RAM disk, and there is a limited set "
@@ -4074,7 +4079,7 @@ msgstr ""
 "shell 有一些好用的特性，如自動完成與歷史紀錄。"
 
 #. Tag: para
-#: using-d-i.xml:3041
+#: using-d-i.xml:3038
 #, no-c-format
 msgid ""
 "To edit and view files, use the text editor <command>nano</command>. Log "
@@ -4083,7 +4088,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3048
+#: using-d-i.xml:3045
 #, no-c-format
 msgid ""
 "Although you can do basically anything in a shell that the available "
@@ -4092,7 +4097,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3054
+#: using-d-i.xml:3051
 #, no-c-format
 msgid ""
 "Doing things manually from the shell may interfere with the installation "
@@ -4102,13 +4107,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:3069
+#: using-d-i.xml:3066
 #, no-c-format
 msgid "Installation Over the Network"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3071
+#: using-d-i.xml:3068
 #, no-c-format
 msgid ""
 "One of the more interesting components is <firstterm>network-console</"
@@ -4120,7 +4125,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3081
+#: using-d-i.xml:3078
 #, no-c-format
 msgid ""
 "This component is not loaded into the main installation menu by default, so "
@@ -4134,7 +4139,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3094
+#: using-d-i.xml:3091
 #, no-c-format
 msgid ""
 "For installations on &arch-title;, this is the default method after setting "
@@ -4142,7 +4147,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3099
+#: using-d-i.xml:3096
 #, no-c-format
 msgid ""
 "<phrase arch=\"not-s390\">After selecting this new entry, you</phrase> "
@@ -4156,7 +4161,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3111
+#: using-d-i.xml:3108
 #, no-c-format
 msgid ""
 "Should you decide to continue with the installation locally, you can always "
@@ -4165,7 +4170,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3117
+#: using-d-i.xml:3114
 #, no-c-format
 msgid ""
 "Now let's switch to the other side of the wire. As a prerequisite, you need "
@@ -4184,7 +4189,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3134
+#: using-d-i.xml:3131
 #, no-c-format
 msgid ""
 "The <command>ssh</command> server in the installer uses a default "
@@ -4200,7 +4205,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3147
+#: using-d-i.xml:3144
 #, no-c-format
 msgid ""
 "You may be able to avoid the connection being dropped by adding the option "
@@ -4214,7 +4219,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3160
+#: using-d-i.xml:3157
 #, no-c-format
 msgid ""
 "If you install several computers in turn and they happen to have the same IP "
@@ -4229,7 +4234,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3176
+#: using-d-i.xml:3173
 #, no-c-format
 msgid ""
 "After the login you will be presented with an initial screen where you have "
@@ -4242,7 +4247,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3186
+#: using-d-i.xml:3183
 #, no-c-format
 msgid ""
 "After you have started the installation remotely over SSH, you should not go "
@@ -4253,7 +4258,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3194
+#: using-d-i.xml:3191
 #, no-c-format
 msgid ""
 "Also, if you are running the SSH session from an X terminal, you should not "