[SILENT_COMMIT] Update of POT and PO files for the installation-guide

1 files changed, 169 insertions, 151 deletions

diff --git a/po/ru/using-d-i.po b/po/ru/using-d-i.po
index 03373ea8c..6e422043d 100644
--- a/po/ru/using-d-i.po
+++ b/po/ru/using-d-i.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: using-d-i\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2019-07-03 23:05+0000\n"
+"POT-Creation-Date: 2019-08-10 23:04+0000\n"
 "PO-Revision-Date: 2018-10-22 19:02+0300\n"
 "Last-Translator: Yuri Kozlov <yuray@komyakino.ru>\n"
 "Language-Team: Russian <debian-l10n-russian@lists.debian.org>\n"
@@ -4136,12 +4136,16 @@ msgstr "Выбор сетевого сервера-зеркала пакетов
 
 #. Tag: para
 #: using-d-i.xml:2475
-#, no-c-format
-msgid ""
-"If you have selected to use a network mirror during the installation "
-"(optional for CD/DVD installs, required for netboot images), you will be "
-"presented with a list of geographically nearby (and therefore hopefully "
-"fast) network mirrors, based upon your country selection earlier in the "
+#, fuzzy, no-c-format
+#| msgid ""
+#| "If you have selected to use a network mirror during the installation "
+#| "(optional for CD/DVD installs, required for netboot images), you will be "
+#| "presented with a list of geographically nearby (and therefore hopefully "
+#| "fast) network mirrors, based upon your country selection earlier in the "
+#| "installation process. Choosing the offered default is usually fine."
+msgid ""
+"Unless you chose not to use a network mirror, you will be presented with a "
+"list of network mirrors based upon your country selection earlier in the "
 "installation process. Choosing the offered default is usually fine."
 msgstr ""
 "Если при установке вы выбрали использование сетевого сервера-зеркала пакетов "
@@ -4151,14 +4155,30 @@ msgstr ""
 "выбор по умолчанию, обычно, работает хорошо."
 
 #. Tag: para
-#: using-d-i.xml:2483
+#: using-d-i.xml:2482
 #, no-c-format
 msgid ""
+"The offered default is deb.debian.org, which is not a mirror itself but will "
+"redirect to a mirror that should be up-to-date and fast. These mirrors "
+"support TLS (https protocol) and IPv6. This service is maintained by the "
+"Debian System Administration (DSA) team."
+msgstr ""
+
+#. Tag: para
+#: using-d-i.xml:2489
+#, fuzzy, no-c-format
+#| msgid ""
+#| "A mirror can also be specified by hand by choosing <quote>enter "
+#| "information manually</quote> . You can then specify a mirror host name "
+#| "and an optional port number. As of Wheezy, that actually has to be a URL "
+#| "base, i.e. when specifying an IPv6 address, one has to add square "
+#| "brackets around it, for instance <quote>[2001:db8::1]</quote>."
+msgid ""
 "A mirror can also be specified by hand by choosing <quote>enter information "
 "manually</quote> . You can then specify a mirror host name and an optional "
-"port number. As of Wheezy, that actually has to be a URL base, i.e. when "
-"specifying an IPv6 address, one has to add square brackets around it, for "
-"instance <quote>[2001:db8::1]</quote>."
+"port number. This actually has to be a URL base, i.e. when specifying an "
+"IPv6 address, one has to add square brackets around it, for instance "
+"<quote>[2001:db8::1]</quote>."
 msgstr ""
 "Зеркало также можно задать вручную выбрав <quote>ввести информацию вручную</"
 "quote>. После этого вы можете указать имя узла-зеркала и необязательный "
@@ -4167,7 +4187,7 @@ msgstr ""
 "quote>."
 
 #. Tag: para
-#: using-d-i.xml:2491
+#: using-d-i.xml:2497
 #, no-c-format
 msgid ""
 "If your computer is on an IPv6-only network (which is probably not the case "
@@ -4193,33 +4213,14 @@ msgstr ""
 "указать <quote>ftp.ipv6.debian.org</quote>, которое является псевдонимом "
 "зеркала, доступного по IPv6, хотя оно не будет таким быстрым."
 
-#. Tag: para
-#: using-d-i.xml:2505
-#, no-c-format
-msgid ""
-"Another option when choosing to specify the mirror manually is to use "
-"<quote>httpredir.debian.org</quote> as your mirror. <quote>httpredir.debian."
-"org</quote> is not a physical mirror but a mirror redirection service, i.e. "
-"it automatically refers your system to a real mirror near you in terms of "
-"network topology. It takes into account by which protocol you connect to it, "
-"i.e. if you use IPv6, it will refer you to an IPv6-capable mirror near you."
-msgstr ""
-"Другой возможностью выбора зеркала вручную является ввод <quote>http.debian."
-"net</quote>. Именем <quote>httpredir.debian.org</quote> адресуется не "
-"физический сервер-зеркало, а служба перенаправления, которая автоматически "
-"перенаправит вашу систему на ближайшее к вам с точки зрения сетевой "
-"топологии реально существующее зеркало. Она учитывает протокол подключения, "
-"то есть, если вы используете IPv6, то она перенаправит вас на ближайшее "
-"зеркало, поддерживающее IPv6."
-
 #. Tag: title
-#: using-d-i.xml:2524
+#: using-d-i.xml:2520
 #, no-c-format
 msgid "Selecting and Installing Software"
 msgstr "Выбор и установка программного обеспечения"
 
 #. Tag: para
-#: using-d-i.xml:2526
+#: using-d-i.xml:2522
 #, no-c-format
 msgid ""
 "During the installation process, you are given the opportunity to select "
@@ -4236,7 +4237,7 @@ msgstr ""
 "настроить компьютер на выполнение определённых задач."
 
 #. Tag: para
-#: using-d-i.xml:2535
+#: using-d-i.xml:2531
 #, no-c-format
 msgid ""
 "These tasks loosely represent a number of different jobs or things you want "
@@ -4268,7 +4269,7 @@ msgstr ""
 "задач."
 
 #. Tag: para
-#: using-d-i.xml:2561
+#: using-d-i.xml:2557
 #, no-c-format
 msgid ""
 "Some tasks may be pre-selected based on the characteristics of the computer "
@@ -4281,7 +4282,7 @@ msgstr ""
 "устанавливать с помощью задач."
 
 #. Tag: para
-#: using-d-i.xml:2568
+#: using-d-i.xml:2564
 #, no-c-format
 msgid ""
 "In the standard user interface of the installer, you can use the space bar "
@@ -4291,7 +4292,7 @@ msgstr ""
 "отмены задач используется клавиша пробел."
 
 #. Tag: para
-#: using-d-i.xml:2574
+#: using-d-i.xml:2570
 #, no-c-format
 msgid ""
 "The <quote>Desktop environment</quote> task will install a graphical desktop "
@@ -4301,7 +4302,7 @@ msgstr ""
 "графическое окружение рабочего стола."
 
 #. Tag: para
-#: using-d-i.xml:2579
+#: using-d-i.xml:2575
 #, no-c-format
 msgid ""
 "By default, &d-i; installs the <phrase arch=\"x86\">Gnome</phrase> <phrase "
@@ -4317,7 +4318,7 @@ msgstr ""
 "установлены одновременно."
 
 #. Tag: para
-#: using-d-i.xml:2587
+#: using-d-i.xml:2583
 #, no-c-format
 msgid ""
 "Note that this will only work if the packages needed for the desired desktop "
@@ -4336,7 +4337,7 @@ msgstr ""
 "работает при использовании образа DVD или другого метода установки."
 
 #. Tag: para
-#: using-d-i.xml:2597
+#: using-d-i.xml:2593
 #, no-c-format
 msgid ""
 "The various server tasks will install software roughly as follows. Web "
@@ -4348,7 +4349,7 @@ msgstr ""
 "classname>; сервер SSH: <classname>openssh</classname>."
 
 #. Tag: para
-#: using-d-i.xml:2604
+#: using-d-i.xml:2600
 #, no-c-format
 msgid ""
 "The <quote>Standard system</quote> task will install any package that has a "
@@ -4364,7 +4365,7 @@ msgstr ""
 "работоспособную систему."
 
 #. Tag: para
-#: using-d-i.xml:2612
+#: using-d-i.xml:2608
 #, no-c-format
 msgid ""
 "If during language selection a default locale other than the <quote>C</"
@@ -4384,7 +4385,7 @@ msgstr ""
 "соответствующие пакеты локализации (если есть)."
 
 #. Tag: para
-#: using-d-i.xml:2622
+#: using-d-i.xml:2618
 #, no-c-format
 msgid ""
 "Once you've selected your tasks, select &BTN-CONT;. At this point, "
@@ -4398,7 +4399,7 @@ msgstr ""
 "во время данного процесса."
 
 #. Tag: para
-#: using-d-i.xml:2629
+#: using-d-i.xml:2625
 #, no-c-format
 msgid ""
 "You should be aware that especially the Desktop task is very large. "
@@ -4415,7 +4416,7 @@ msgstr ""
 "времени. После начала установки пакетов её никак нельзя прервать."
 
 #. Tag: para
-#: using-d-i.xml:2638
+#: using-d-i.xml:2634
 #, no-c-format
 msgid ""
 "Even when packages are included on the CD-ROM, the installer may still "
@@ -4433,13 +4434,13 @@ msgstr ""
 "происходить, если у вас устаревший образ."
 
 #. Tag: title
-#: using-d-i.xml:2653
+#: using-d-i.xml:2649
 #, no-c-format
 msgid "Making Your System Bootable"
 msgstr "Установка и настройка системного загрузчика"
 
 #. Tag: para
-#: using-d-i.xml:2655
+#: using-d-i.xml:2651
 #, no-c-format
 msgid ""
 "If you are installing a diskless workstation, obviously, booting off the "
@@ -4453,13 +4454,13 @@ msgstr ""
 "по умолчанию; смотрите <xref linkend=\"boot-dev-select-sun\"/>.</phrase>"
 
 #. Tag: title
-#: using-d-i.xml:2670
+#: using-d-i.xml:2666
 #, no-c-format
 msgid "Detecting other operating systems"
 msgstr "Обнаружение операционных систем"
 
 #. Tag: para
-#: using-d-i.xml:2672
+#: using-d-i.xml:2668
 #, no-c-format
 msgid ""
 "Before a boot loader is installed, the installer will attempt to probe for "
@@ -4475,7 +4476,7 @@ msgstr ""
 "операционную систему в дополнении к &debian;."
 
 #. Tag: para
-#: using-d-i.xml:2680
+#: using-d-i.xml:2676
 #, no-c-format
 msgid ""
 "Note that multiple operating systems booting on a single machine is still "
@@ -4491,13 +4492,13 @@ msgstr ""
 "информацию можно найти в документации по менеджеру загрузки."
 
 #. Tag: title
-#: using-d-i.xml:2698
+#: using-d-i.xml:2694
 #, no-c-format
 msgid "<command>palo</command>-installer"
 msgstr "Системный загрузчик <command>palo</command>"
 
 #. Tag: para
-#: using-d-i.xml:2699
+#: using-d-i.xml:2695
 #, no-c-format
 msgid ""
 "The bootloader on PA-RISC is <quote>palo</quote>. <command>PALO</command> is "
@@ -4513,20 +4514,20 @@ msgstr ""
 "есть <command>PALO</command> умеет работать с разделами Linux."
 
 #. Tag: para
-#: using-d-i.xml:2708
+#: using-d-i.xml:2704
 #, no-c-format
 msgid "hppa FIXME ( need more info )"
 msgstr "hppa FIXME (нужно больше информации)"
 
 #. Tag: title
-#: using-d-i.xml:2720 using-d-i.xml:2993
+#: using-d-i.xml:2716 using-d-i.xml:2989
 #, no-c-format
 msgid "Install the <command>Grub</command> Boot Loader on a Hard Disk"
 msgstr ""
 "Установка системного загрузчика <command>Grub</command> на жёсткий диск"
 
 #. Tag: para
-#: using-d-i.xml:2722 using-d-i.xml:2995
+#: using-d-i.xml:2718 using-d-i.xml:2991
 #, no-c-format
 msgid ""
 "The main &architecture; boot loader is called <quote>grub</quote>. Grub is a "
@@ -4538,7 +4539,7 @@ msgstr ""
 "хорошим выбором по умолчанию для новичков и опытных пользователей."
 
 #. Tag: para
-#: using-d-i.xml:2728
+#: using-d-i.xml:2724
 #, no-c-format
 msgid ""
 "By default, grub will be installed into the Master Boot Record (MBR), where "
@@ -4551,7 +4552,7 @@ msgstr ""
 "grub."
 
 #. Tag: para
-#: using-d-i.xml:2734
+#: using-d-i.xml:2730
 #, no-c-format
 msgid ""
 "If you do not want to install grub, use the &BTN-GOBACK; button to get to "
@@ -4563,14 +4564,14 @@ msgstr ""
 "хотите использовать."
 
 #. Tag: title
-#: using-d-i.xml:2747
+#: using-d-i.xml:2743
 #, no-c-format
 msgid "Install the <command>LILO</command> Boot Loader on a Hard Disk"
 msgstr ""
 "Установка системного загрузчика <command>LILO</command> на жёсткий диск"
 
 #. Tag: para
-#: using-d-i.xml:2749
+#: using-d-i.xml:2745
 #, no-c-format
 msgid ""
 "The second &architecture; boot loader is called <quote>LILO</quote>. It is "
@@ -4587,7 +4588,7 @@ msgstr ""
 "ulink>."
 
 #. Tag: para
-#: using-d-i.xml:2759
+#: using-d-i.xml:2755
 #, no-c-format
 msgid ""
 "Currently the LILO installation will only create menu entries for other "
@@ -4601,7 +4602,7 @@ msgstr ""
 "операционных систем, например, GNU/Linux и GNU/Hurd после установки."
 
 #. Tag: para
-#: using-d-i.xml:2767
+#: using-d-i.xml:2763
 #, no-c-format
 msgid ""
 "&d-i; offers you three choices on where to install the <command>LILO</"
@@ -4611,13 +4612,13 @@ msgstr ""
 "<command>LILO</command>:"
 
 #. Tag: term
-#: using-d-i.xml:2774
+#: using-d-i.xml:2770
 #, no-c-format
 msgid "Master Boot Record (MBR)"
 msgstr "Главная загрузочная запись (MBR)"
 
 #. Tag: para
-#: using-d-i.xml:2774
+#: using-d-i.xml:2770
 #, no-c-format
 msgid ""
 "This way the <command>LILO</command> will take complete control of the boot "
@@ -4627,13 +4628,13 @@ msgstr ""
 "загрузки."
 
 #. Tag: term
-#: using-d-i.xml:2781
+#: using-d-i.xml:2777
 #, no-c-format
 msgid "new &debian; partition"
 msgstr "новый раздел &debian;"
 
 #. Tag: para
-#: using-d-i.xml:2781
+#: using-d-i.xml:2777
 #, no-c-format
 msgid ""
 "Choose this if you want to use another boot manager. <command>LILO</command> "
@@ -4645,13 +4646,13 @@ msgstr ""
 "созданного для &debian; и будет играть роль вторичного системного загрузчика."
 
 #. Tag: term
-#: using-d-i.xml:2790
+#: using-d-i.xml:2786
 #, no-c-format
 msgid "Other choice"
 msgstr "Другой"
 
 #. Tag: para
-#: using-d-i.xml:2790
+#: using-d-i.xml:2786
 #, no-c-format
 msgid ""
 "Useful for advanced users who want to install <command>LILO</command> "
@@ -4663,7 +4664,7 @@ msgstr ""
 "использовать традиционные имена устройств типа <filename>/dev/sda</filename>."
 
 #. Tag: para
-#: using-d-i.xml:2800
+#: using-d-i.xml:2796
 #, no-c-format
 msgid ""
 "If you can no longer boot into Windows 9x (or DOS) after this step, you'll "
@@ -4679,14 +4680,14 @@ msgstr ""
 "искать какой-то другой способ, чтобы попасть обратно в &debian;!"
 
 #. Tag: title
-#: using-d-i.xml:2816
+#: using-d-i.xml:2812
 #, no-c-format
 msgid "Install the <command>ELILO</command> Boot Loader on a Hard Disk"
 msgstr ""
 "Установка системного загрузчика <command>ELILO</command> на жёсткий диск"
 
 #. Tag: para
-#: using-d-i.xml:2818
+#: using-d-i.xml:2814
 #, no-c-format
 msgid ""
 "The &architecture; boot loader is called <quote>elilo</quote>. It is modeled "
@@ -4714,7 +4715,7 @@ msgstr ""
 "quote>, чтобы загрузить и выполнить ядро Linux."
 
 #. Tag: para
-#: using-d-i.xml:2834
+#: using-d-i.xml:2830
 #, no-c-format
 msgid ""
 "The <quote>elilo</quote> configuration and installation is done as the last "
@@ -4731,13 +4732,13 @@ msgstr ""
 "диске что и <emphasis>корневая</emphasis> файловая система."
 
 #. Tag: title
-#: using-d-i.xml:2846
+#: using-d-i.xml:2842
 #, no-c-format
 msgid "Choose the correct partition!"
 msgstr "Выберите правильный раздел!"
 
 #. Tag: para
-#: using-d-i.xml:2848
+#: using-d-i.xml:2844
 #, no-c-format
 msgid ""
 "The criterion for selecting a partition is that it must be a FAT format "
@@ -4755,13 +4756,13 @@ msgstr ""
 "установки, стерев его содержимое!"
 
 #. Tag: title
-#: using-d-i.xml:2863
+#: using-d-i.xml:2859
 #, no-c-format
 msgid "EFI Partition Contents"
 msgstr "Содержимое EFI раздела"
 
 #. Tag: para
-#: using-d-i.xml:2865
+#: using-d-i.xml:2861
 #, no-c-format
 msgid ""
 "The EFI partition is a FAT filesystem format partition on one of the hard "
@@ -4791,13 +4792,13 @@ msgstr ""
 "настройки системы."
 
 #. Tag: filename
-#: using-d-i.xml:2887
+#: using-d-i.xml:2883
 #, no-c-format
 msgid "elilo.conf"
 msgstr "elilo.conf"
 
 #. Tag: para
-#: using-d-i.xml:2888
+#: using-d-i.xml:2884
 #, no-c-format
 msgid ""
 "This is the configuration file read by the boot loader when it starts. It is "
@@ -4809,13 +4810,13 @@ msgstr ""
 "указывающими на файлы в EFI разделе."
 
 #. Tag: filename
-#: using-d-i.xml:2897
+#: using-d-i.xml:2893
 #, no-c-format
 msgid "elilo.efi"
 msgstr "elilo.efi"
 
 #. Tag: para
-#: using-d-i.xml:2898
+#: using-d-i.xml:2894
 #, no-c-format
 msgid ""
 "This is the boot loader program that the <quote>EFI Boot Manager</quote> "
@@ -4829,13 +4830,13 @@ msgstr ""
 "<quote>менеджер загрузки EFI</quote>."
 
 #. Tag: filename
-#: using-d-i.xml:2908
+#: using-d-i.xml:2904
 #, no-c-format
 msgid "initrd.img"
 msgstr "initrd.img"
 
 #. Tag: para
-#: using-d-i.xml:2909
+#: using-d-i.xml:2905
 #, no-c-format
 msgid ""
 "This is the initial root filesystem used to boot the kernel. It is a copy of "
@@ -4850,13 +4851,13 @@ msgstr ""
 "ссылка <filename>/initrd.img</filename>."
 
 #. Tag: filename
-#: using-d-i.xml:2921
+#: using-d-i.xml:2917
 #, no-c-format
 msgid "readme.txt"
 msgstr "readme.txt"
 
 #. Tag: para
-#: using-d-i.xml:2922
+#: using-d-i.xml:2918
 #, no-c-format
 msgid ""
 "This is a small text file warning you that the contents of the directory are "
@@ -4868,13 +4869,13 @@ msgstr ""
 "будут уничтожены при следующем запуске <filename>/usr/sbin/elilo</filename>."
 
 #. Tag: filename
-#: using-d-i.xml:2932
+#: using-d-i.xml:2928
 #, no-c-format
 msgid "vmlinuz"
 msgstr "vmlinuz"
 
 #. Tag: para
-#: using-d-i.xml:2933
+#: using-d-i.xml:2929
 #, no-c-format
 msgid ""
 "This is the compressed kernel itself. It is a copy of the file referenced in "
@@ -4888,14 +4889,14 @@ msgstr ""
 "ссылка <filename>/vmlinuz</filename>."
 
 #. Tag: title
-#: using-d-i.xml:2957
+#: using-d-i.xml:2953
 #, no-c-format
 msgid "Install <command>Yaboot</command> on a Hard Disk"
 msgstr ""
 "Установка системного загрузчика <command>Yaboot</command> на жёсткий диск"
 
 #. Tag: para
-#: using-d-i.xml:2958
+#: using-d-i.xml:2954
 #, no-c-format
 msgid ""
 "Newer (mid 1998 and on) PowerMacs use <command>yaboot</command> as their "
@@ -4915,14 +4916,14 @@ msgstr ""
 "OpenFirmware установлена на загрузку &debian-gnu;."
 
 #. Tag: title
-#: using-d-i.xml:2976
+#: using-d-i.xml:2972
 #, no-c-format
 msgid "Install <command>Quik</command> on a Hard Disk"
 msgstr ""
 "Установка системного загрузчика <command>Quik</command> на жёсткий диск"
 
 #. Tag: para
-#: using-d-i.xml:2977
+#: using-d-i.xml:2973
 #, no-c-format
 msgid ""
 "The boot loader for OldWorld Power Macintosh machines is <command>quik</"
@@ -4937,7 +4938,7 @@ msgstr ""
 "на некоторых клонах Power Computing."
 
 #. Tag: para
-#: using-d-i.xml:3001
+#: using-d-i.xml:2997
 #, no-c-format
 msgid ""
 "By default, Grub will be installed into the PReP partition, where it will "
@@ -4947,13 +4948,13 @@ msgstr ""
 "контролировать процесс загрузки."
 
 #. Tag: title
-#: using-d-i.xml:3014
+#: using-d-i.xml:3010
 #, no-c-format
 msgid "<command>zipl</command>-installer"
 msgstr "Установка системного загрузчика <command>zipl</command>"
 
 #. Tag: para
-#: using-d-i.xml:3015
+#: using-d-i.xml:3011
 #, no-c-format
 msgid ""
 "The boot loader on &arch-title; is <quote>zipl</quote>. <command>ZIPL</"
@@ -4969,14 +4970,14 @@ msgstr ""
 "developerWorks, если хотите узнать больше о <command>ZIPL</command>."
 
 #. Tag: title
-#: using-d-i.xml:3032
+#: using-d-i.xml:3028
 #, no-c-format
 msgid "Install the <command>SILO</command> Boot Loader on a Hard Disk"
 msgstr ""
 "Установка системного загрузчика <command>SILO</command> на жёсткий диск"
 
 #. Tag: para
-#: using-d-i.xml:3034
+#: using-d-i.xml:3030
 #, no-c-format
 msgid ""
 "The standard &architecture; boot loader is called <quote>silo</quote>. It is "
@@ -5007,13 +5008,13 @@ msgstr ""
 "Solaris."
 
 #. Tag: title
-#: using-d-i.xml:3059
+#: using-d-i.xml:3055
 #, no-c-format
 msgid "Making the system bootable with flash-kernel"
 msgstr "Настройка системы на загрузку с помощью flash-kernel"
 
 #. Tag: para
-#: using-d-i.xml:3060
+#: using-d-i.xml:3056
 #, no-c-format
 msgid ""
 "As there is no common firmware interface on all ARM platforms, the steps "
@@ -5033,7 +5034,7 @@ msgstr ""
 "действия."
 
 #. Tag: para
-#: using-d-i.xml:3071
+#: using-d-i.xml:3067
 #, no-c-format
 msgid ""
 "On devices which boot from internal NOR- or NAND-flash memory, flash-kernel "
@@ -5051,7 +5052,7 @@ msgstr ""
 "содержимое памяти!"
 
 #. Tag: para
-#: using-d-i.xml:3081
+#: using-d-i.xml:3077
 #, no-c-format
 msgid ""
 "For ARM systems that use U-Boot as their system firmware and boot the kernel "
@@ -5066,13 +5067,13 @@ msgstr ""
 "автозагрузку без действий пользователя."
 
 #. Tag: title
-#: using-d-i.xml:3097
+#: using-d-i.xml:3093
 #, no-c-format
 msgid "Continue Without Boot Loader"
 msgstr "Продолжение без системного загрузчика"
 
 #. Tag: para
-#: using-d-i.xml:3099
+#: using-d-i.xml:3095
 #, no-c-format
 msgid ""
 "This option can be used to complete the installation even when no boot "
@@ -5085,7 +5086,7 @@ msgstr ""
 "существующий системный загрузчик)."
 
 #. Tag: para
-#: using-d-i.xml:3106
+#: using-d-i.xml:3102
 #, no-c-format
 msgid ""
 "If you plan to manually configure your bootloader, you should check the name "
@@ -5107,13 +5108,13 @@ msgstr ""
 "то также и раздел файловой системы с <filename>/boot</filename>."
 
 #. Tag: title
-#: using-d-i.xml:3123
+#: using-d-i.xml:3119
 #, no-c-format
 msgid "Finishing the Installation"
 msgstr "Завершение установки"
 
 #. Tag: para
-#: using-d-i.xml:3124
+#: using-d-i.xml:3120
 #, no-c-format
 msgid ""
 "This is the last step in the &debian; installation process during which the "
@@ -5124,13 +5125,13 @@ msgstr ""
 "установки выполнит ещё пару действий. В основном, это уборка за &d-i;."
 
 #. Tag: title
-#: using-d-i.xml:3137
+#: using-d-i.xml:3133
 #, no-c-format
 msgid "Setting the System Clock"
 msgstr "Настройка системного времени"
 
 #. Tag: para
-#: using-d-i.xml:3139
+#: using-d-i.xml:3135
 #, no-c-format
 msgid ""
 "The installer may ask you if the computer's clock is set to UTC. Normally "
@@ -5144,7 +5145,7 @@ msgstr ""
 "машине не установлено других операционных систем."
 
 #. Tag: para
-#: using-d-i.xml:3146
+#: using-d-i.xml:3142
 #, no-c-format
 msgid ""
 "In expert mode you will always be able to choose whether or not the clock is "
@@ -5163,7 +5164,7 @@ msgstr ""
 "время вместо UTC.</phrase>"
 
 #. Tag: para
-#: using-d-i.xml:3157
+#: using-d-i.xml:3153
 #, no-c-format
 msgid ""
 "At this point &d-i; will also attempt to save the current time to the "
@@ -5175,13 +5176,13 @@ msgstr ""
 "выбора, который вы недавно делали."
 
 #. Tag: title
-#: using-d-i.xml:3172
+#: using-d-i.xml:3168
 #, no-c-format
 msgid "Reboot the System"
 msgstr "Перезагрузка системы"
 
 #. Tag: para
-#: using-d-i.xml:3174
+#: using-d-i.xml:3170
 #, no-c-format
 msgid ""
 "You will be prompted to remove the boot media (CD, floppy, etc) that you "
@@ -5193,7 +5194,7 @@ msgstr ""
 "перезагружен в новую систему &debian;."
 
 #. Tag: para
-#: using-d-i.xml:3180
+#: using-d-i.xml:3176
 #, no-c-format
 msgid ""
 "After a final prompt the system will be halted because rebooting is not "
@@ -5207,13 +5208,13 @@ msgstr ""
 "системы в самом начале установки."
 
 #. Tag: title
-#: using-d-i.xml:3193
+#: using-d-i.xml:3189
 #, no-c-format
 msgid "Troubleshooting"
 msgstr "Устранение проблем"
 
 #. Tag: para
-#: using-d-i.xml:3194
+#: using-d-i.xml:3190
 #, no-c-format
 msgid ""
 "The components listed in this section are usually not involved in the "
@@ -5225,13 +5226,13 @@ msgstr ""
 "пойдёт не так."
 
 #. Tag: title
-#: using-d-i.xml:3207
+#: using-d-i.xml:3203
 #, no-c-format
 msgid "Saving the installation logs"
 msgstr "Сохранение протокола установки"
 
 #. Tag: para
-#: using-d-i.xml:3209
+#: using-d-i.xml:3205
 #, no-c-format
 msgid ""
 "If the installation is successful, the logfiles created during the "
@@ -5243,7 +5244,7 @@ msgstr ""
 "installer/</filename> в новой системе &debian;."
 
 #. Tag: para
-#: using-d-i.xml:3216
+#: using-d-i.xml:3212
 #, no-c-format
 msgid ""
 "Choosing <guimenuitem>Save debug logs</guimenuitem> from the main menu "
@@ -5259,13 +5260,13 @@ msgstr ""
 "протокол на другой системе или послать его вместе с отчётом об ошибке."
 
 #. Tag: title
-#: using-d-i.xml:3236
+#: using-d-i.xml:3232
 #, no-c-format
 msgid "Using the Shell and Viewing the Logs"
 msgstr "Использование командной строки и просмотр журнальных файлов"
 
 #. Tag: para
-#: using-d-i.xml:3238
+#: using-d-i.xml:3234
 #, no-c-format
 msgid ""
 "There are several methods you can use to get a shell while running an "
@@ -5292,7 +5293,7 @@ msgstr ""
 "Alt</keycap> <keycap>F1</keycap></keycombo>."
 
 #. Tag: para
-#: using-d-i.xml:3256
+#: using-d-i.xml:3252
 #, no-c-format
 msgid "For the graphical installer see also <xref linkend=\"gtk-using\"/>."
 msgstr ""
@@ -5300,7 +5301,7 @@ msgstr ""
 "linkend=\"gtk-using\"/>."
 
 #. Tag: para
-#: using-d-i.xml:3260
+#: using-d-i.xml:3256
 #, no-c-format
 msgid ""
 "If you cannot switch consoles, there is also an <guimenuitem>Execute a "
@@ -5316,7 +5317,7 @@ msgstr ""
 "установки, введите <userinput>exit</userinput> для завершения оболочки."
 
 #. Tag: para
-#: using-d-i.xml:3268
+#: using-d-i.xml:3264
 #, no-c-format
 msgid ""
 "At this point you are booted from the RAM disk, and there is a limited set "
@@ -5334,7 +5335,7 @@ msgstr ""
 "автодополнение и история команд."
 
 #. Tag: para
-#: using-d-i.xml:3277
+#: using-d-i.xml:3273
 #, no-c-format
 msgid ""
 "To edit and view files, use the text editor <command>nano</command>. Log "
@@ -5346,7 +5347,7 @@ msgstr ""
 "каталоге <filename>/var/log</filename>."
 
 #. Tag: para
-#: using-d-i.xml:3284
+#: using-d-i.xml:3280
 #, no-c-format
 msgid ""
 "Although you can do basically anything in a shell that the available "
@@ -5358,7 +5359,7 @@ msgstr ""
 "что-то заработает неправильно."
 
 #. Tag: para
-#: using-d-i.xml:3290
+#: using-d-i.xml:3286
 #, no-c-format
 msgid ""
 "Doing things manually from the shell may interfere with the installation "
@@ -5372,13 +5373,13 @@ msgstr ""
 "самостоятельно из оболочки командной строки."
 
 #. Tag: title
-#: using-d-i.xml:3306
+#: using-d-i.xml:3302
 #, no-c-format
 msgid "Installation Over the Network"
 msgstr "Установка по сети"
 
 #. Tag: para
-#: using-d-i.xml:3308
+#: using-d-i.xml:3304
 #, no-c-format
 msgid ""
 "One of the more interesting components is <firstterm>network-console</"
@@ -5396,7 +5397,7 @@ msgstr ""
 ">.)"
 
 #. Tag: para
-#: using-d-i.xml:3318
+#: using-d-i.xml:3314
 #, no-c-format
 msgid ""
 "This component is not loaded into the main installation menu by default, so "
@@ -5418,7 +5419,7 @@ msgstr ""
 "<guimenuitem>Продолжение установки через SSH</guimenuitem>."
 
 #. Tag: para
-#: using-d-i.xml:3331
+#: using-d-i.xml:3327
 #, no-c-format
 msgid ""
 "For installations on &arch-title;, this is the default method after setting "
@@ -5428,7 +5429,7 @@ msgstr ""
 "после настройки сети."
 
 #. Tag: para
-#: using-d-i.xml:3336
+#: using-d-i.xml:3332
 #, no-c-format
 msgid ""
 "<phrase arch=\"not-s390\">After selecting this new entry, you</phrase> "
@@ -5450,7 +5451,7 @@ msgstr ""
 "удалённо."
 
 #. Tag: para
-#: using-d-i.xml:3348
+#: using-d-i.xml:3344
 #, no-c-format
 msgid ""
 "Should you decide to continue with the installation locally, you can always "
@@ -5462,7 +5463,7 @@ msgstr ""
 "компоненту."
 
 #. Tag: para
-#: using-d-i.xml:3354
+#: using-d-i.xml:3350
 #, no-c-format
 msgid ""
 "Now let's switch to the other side of the wire. As a prerequisite, you need "
@@ -5493,7 +5494,7 @@ msgstr ""
 "чтобы вы смогли убедиться, что это именно тот компьютер."
 
 #. Tag: para
-#: using-d-i.xml:3371
+#: using-d-i.xml:3367
 #, no-c-format
 msgid ""
 "The <command>ssh</command> server in the installer uses a default "
@@ -5519,7 +5520,7 @@ msgstr ""
 "переподключения."
 
 #. Tag: para
-#: using-d-i.xml:3384
+#: using-d-i.xml:3380
 #, no-c-format
 msgid ""
 "You may be able to avoid the connection being dropped by adding the option "
@@ -5542,7 +5543,7 @@ msgstr ""
 "нужно."
 
 #. Tag: para
-#: using-d-i.xml:3397
+#: using-d-i.xml:3393
 #, no-c-format
 msgid ""
 "If you install several computers in turn and they happen to have the same IP "
@@ -5566,7 +5567,7 @@ msgstr ""
 "command>. </para> </footnote> и попробовать подключиться ещё раз."
 
 #. Tag: para
-#: using-d-i.xml:3413
+#: using-d-i.xml:3409
 #, no-c-format
 msgid ""
 "After the login you will be presented with an initial screen where you have "
@@ -5586,7 +5587,7 @@ msgstr ""
 "для установочного меню и несколько для оболочки командной строки."
 
 #. Tag: para
-#: using-d-i.xml:3423
+#: using-d-i.xml:3419
 #, no-c-format
 msgid ""
 "After you have started the installation remotely over SSH, you should not go "
@@ -5601,13 +5602,13 @@ msgstr ""
 "завершению установки или проблемам в установленной системой."
 
 #. Tag: title
-#: using-d-i.xml:3442
+#: using-d-i.xml:3438
 #, no-c-format
 msgid "Loading Missing Firmware"
 msgstr "Загрузка отсутствующих микропрограмм"
 
 #. Tag: para
-#: using-d-i.xml:3443
+#: using-d-i.xml:3439
 #, no-c-format
 msgid ""
 "As described in <xref linkend=\"hardware-firmware\"/>, some devices require "
@@ -5622,7 +5623,7 @@ msgstr ""
 "для предоставления дополнительных возможностей."
 
 #. Tag: para
-#: using-d-i.xml:3451
+#: using-d-i.xml:3447
 #, no-c-format
 msgid ""
 "If a device driver requests firmware that is not available, &d-i; will "
@@ -5641,7 +5642,7 @@ msgstr ""
 "драйвером."
 
 #. Tag: para
-#: using-d-i.xml:3461
+#: using-d-i.xml:3457
 #, no-c-format
 msgid ""
 "Which devices are scanned and which file systems are supported depends on "
@@ -5658,7 +5659,7 @@ msgstr ""
 "микропрограмма также загружается с карт MMC или SD.</phrase>"
 
 #. Tag: para
-#: using-d-i.xml:3471
+#: using-d-i.xml:3467
 #, no-c-format
 msgid ""
 "Note that it is possible to skip loading the firmware if you know the device "
@@ -5670,7 +5671,7 @@ msgstr ""
 "время установки."
 
 #. Tag: para
-#: using-d-i.xml:3477
+#: using-d-i.xml:3473
 #, no-c-format
 msgid ""
 "&d-i; only prompts for firmware needed by kernel modules loaded during the "
@@ -5692,13 +5693,13 @@ msgstr ""
 "только что загруженной системе и поищите <quote>микропрограмму</quote>."
 
 #. Tag: title
-#: using-d-i.xml:3491
+#: using-d-i.xml:3487
 #, no-c-format
 msgid "Preparing a medium"
 msgstr "Подготовка носителя"
 
 #. Tag: para
-#: using-d-i.xml:3492
+#: using-d-i.xml:3488
 #, no-c-format
 msgid ""
 "Official CD images do not include non-free firmware. The most common method "
@@ -5723,7 +5724,7 @@ msgstr ""
 "скорее всего, поддерживается на самых ранних этапах установки."
 
 #. Tag: para
-#: using-d-i.xml:3505
+#: using-d-i.xml:3501
 #, no-c-format
 msgid ""
 "Tarballs and zip files containing current packages for the most common "
@@ -5739,7 +5740,7 @@ msgstr ""
 "носителя."
 
 #. Tag: para
-#: using-d-i.xml:3519
+#: using-d-i.xml:3515
 #, no-c-format
 msgid ""
 "If the firmware you need is not included in the tarball, you can also "
@@ -5754,7 +5755,7 @@ msgstr ""
 "также может содержать пакеты без микропрограмм:"
 
 #. Tag: para
-#: using-d-i.xml:3533
+#: using-d-i.xml:3529
 #, no-c-format
 msgid ""
 "It is also possible to copy individual firmware files to the medium. Loose "
@@ -5766,13 +5767,13 @@ msgstr ""
 "поставщика оборудования."
 
 #. Tag: title
-#: using-d-i.xml:3542
+#: using-d-i.xml:3538
 #, no-c-format
 msgid "Firmware and the Installed System"
 msgstr "Микропрограмма в установленной системе"
 
 #. Tag: para
-#: using-d-i.xml:3543
+#: using-d-i.xml:3539
 #, no-c-format
 msgid ""
 "Any firmware loaded during the installation will be copied automatically to "
@@ -5791,7 +5792,7 @@ msgstr ""
 "микропрограмма не загрузится из-за изменений ядра."
 
 #. Tag: para
-#: using-d-i.xml:3552
+#: using-d-i.xml:3548
 #, no-c-format
 msgid ""
 "If the firmware was loaded from a firmware package, &d-i; will also install "
@@ -5806,7 +5807,7 @@ msgstr ""
 "автоматически обновлять микропрограмму при появлении новой версии."
 
 #. Tag: para
-#: using-d-i.xml:3560
+#: using-d-i.xml:3556
 #, no-c-format
 msgid ""
 "If loading the firmware was skipped during the installation, the relevant "
@@ -5818,7 +5819,7 @@ msgstr ""
 "пока микропрограмма (пакет) не будет установлена вручную."
 
 #. Tag: para
-#: using-d-i.xml:3567
+#: using-d-i.xml:3563
 #, no-c-format
 msgid ""
 "If the firmware was loaded from loose firmware files, the firmware copied to "
@@ -5831,6 +5832,23 @@ msgstr ""
 "автоматически обновляться, пока не не будет установлен соответствующий пакет "
 "с микропрограммой (если есть) после завершения установки."
 
+#~ msgid ""
+#~ "Another option when choosing to specify the mirror manually is to use "
+#~ "<quote>httpredir.debian.org</quote> as your mirror. <quote>httpredir."
+#~ "debian.org</quote> is not a physical mirror but a mirror redirection "
+#~ "service, i.e. it automatically refers your system to a real mirror near "
+#~ "you in terms of network topology. It takes into account by which protocol "
+#~ "you connect to it, i.e. if you use IPv6, it will refer you to an IPv6-"
+#~ "capable mirror near you."
+#~ msgstr ""
+#~ "Другой возможностью выбора зеркала вручную является ввод <quote>http."
+#~ "debian.net</quote>. Именем <quote>httpredir.debian.org</quote> адресуется "
+#~ "не физический сервер-зеркало, а служба перенаправления, которая "
+#~ "автоматически перенаправит вашу систему на ближайшее к вам с точки зрения "
+#~ "сетевой топологии реально существующее зеркало. Она учитывает протокол "
+#~ "подключения, то есть, если вы используете IPv6, то она перенаправит вас "
+#~ "на ближайшее зеркало, поддерживающее IPv6."
+
 #~ msgid "<command>arcboot</command>-installer"
 #~ msgstr "Системный загрузчик <command>arcboot</command>"