Fix syntax in out-commented line (in english and xml based translations)

+ refresh po|pot files

1 files changed, 212 insertions, 212 deletions

diff --git a/po/pot/hardware.pot b/po/pot/hardware.pot
index fedcc7414..76a1dedfd 100644
--- a/po/pot/hardware.pot
+++ b/po/pot/hardware.pot
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2014-08-03 20:37+0000\n"
+"POT-Creation-Date: 2014-08-06 21:29+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -381,7 +381,7 @@ msgid "Both AMD64 and Intel 64 processors are supported."
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:268 hardware.xml:589 hardware.xml:608 hardware.xml:691 hardware.xml:749 hardware.xml:779
+#: hardware.xml:268 hardware.xml:589 hardware.xml:608 hardware.xml:687 hardware.xml:745 hardware.xml:775
 #, no-c-format
 msgid "CPU, Main Boards, and Video Support"
 msgstr ""
@@ -657,7 +657,7 @@ msgid "Complete information concerning supported peripherals can be found at <ul
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:617 hardware.xml:726
+#: hardware.xml:617 hardware.xml:722
 #, no-c-format
 msgid "<title>CPU</title>"
 msgstr ""
@@ -693,1255 +693,1255 @@ msgid "The system bus is the part of the motherboard which allows the CPU to com
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:692
+#: hardware.xml:688
 #, no-c-format
 msgid "&debian; on &arch-title; supports the following platforms: <itemizedlist> <listitem><para> SGI IP22: this platform includes the SGI machines Indy, Indigo 2 and Challenge S. Since these machines are very similar, whenever this document refers to the SGI Indy, the Indigo 2 and Challenge S are meant as well. </para></listitem> <listitem><para> SGI IP32: this platform is generally known as SGI O2. </para></listitem> <listitem><para> MIPS Malta: this platform is emulated by QEMU and is therefore a nice way to test and run &debian; on MIPS if you don't have the hardware. </para></listitem> </itemizedlist> Complete information regarding supported mips/mipsel machines can be found at the <ulink url=\"&url-linux-mips;\">Linux-MIPS homepage</ulink>. In the following, only the systems supported by the &debian; installer will be covered. If you are looking for support for other subarchitectures, please contact the <ulink url=\"&url-list-subscribe;\"> debian-&arch-listname; mailing list</ulink>."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:727
+#: hardware.xml:723
 #, no-c-format
 msgid "On SGI IP22, SGI Indy, Indigo 2 and Challenge S with R4000, R4400, R4600 and R5000 processors are supported by the &debian; installation system on big endian MIPS. On SGI IP32, currently only systems based on the R5000 are supported."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:733
+#: hardware.xml:729
 #, no-c-format
 msgid "Some MIPS machines can be operated in both big and little endian mode. For little endian MIPS, please read the documentation for the mipsel architecture."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:750
+#: hardware.xml:746
 #, no-c-format
 msgid "&debian; on &arch-title; supports the following platforms: <itemizedlist> <listitem><para> MIPS Malta: this platform is emulated by QEMU and is therefore a nice way to test and run &debian; on MIPS if you don't have the hardware. </para></listitem> </itemizedlist> Complete information regarding supported mips/mipsel machines can be found at the <ulink url=\"&url-linux-mips;\">Linux-MIPS homepage</ulink>. In the following, only the systems supported by the &debian; installer will be covered. If you are looking for support for other subarchitectures, please contact the <ulink url=\"&url-list-subscribe;\"> debian-&arch-listname; mailing list</ulink>."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:780
+#: hardware.xml:776
 #, no-c-format
 msgid "For &debian-gnu; &release; only the PMac (Power-Macintosh or PowerMac) and PreP subarchitectures are supported."
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:801
+#: hardware.xml:797
 #, no-c-format
 msgid "Kernel Flavours"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:803
+#: hardware.xml:799
 #, no-c-format
 msgid "There are two flavours of the powerpc kernel in &debian;, based on the CPU type:"
 msgstr ""
 
 #. Tag: term
-#: hardware.xml:810
+#: hardware.xml:806
 #, no-c-format
 msgid "<term>powerpc</term>"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:811
+#: hardware.xml:807
 #, no-c-format
 msgid "This kernel flavour supports the PowerPC 601, 603, 604, 740, 750, and 7400 processors. All Apple PowerMac machines up to and including the one marketed as G4 use one of these processors."
 msgstr ""
 
 #. Tag: term
-#: hardware.xml:821
+#: hardware.xml:817
 #, no-c-format
 msgid "powerpc-smp"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:822
+#: hardware.xml:818
 #, no-c-format
 msgid "All Apple PowerMac G4 SMP machines."
 msgstr ""
 
 #. Tag: term
-#: hardware.xml:830
+#: hardware.xml:826
 #, no-c-format
 msgid "power64"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:831
+#: hardware.xml:827
 #, no-c-format
 msgid "The power64 kernel flavour supports the following CPUs:"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:835
+#: hardware.xml:831
 #, no-c-format
 msgid "The POWER3 processor is used in older IBM 64-bit server systems: known models include the IntelliStation POWER Model 265, the pSeries 610 and 640, and the RS/6000 7044-170, 7043-260, and 7044-270."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:841
+#: hardware.xml:837
 #, no-c-format
 msgid "The POWER4 processor is used in more recent IBM 64-bit server systems: known models include the pSeries 615, 630, 650, 655, 670, and 690."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:846
+#: hardware.xml:842
 #, no-c-format
 msgid "Systems using the PPC970 processor (Apple G5, YDL PowerStation, IBM Intellistation POWER 185) are also based on the POWER4 architecture, and use this kernel flavour."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:852
+#: hardware.xml:848
 #, no-c-format
 msgid "Newer IBM systems using POWER5, POWER6, and POWER7 processors."
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:885
+#: hardware.xml:881
 #, no-c-format
 msgid "Power Macintosh (pmac) subarchitecture"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:887
+#: hardware.xml:883
 #, no-c-format
 msgid "Apple (and briefly a few other manufacturers &mdash; Power Computing, for example) made a series of Macintosh computers based on the PowerPC processor. For purposes of architecture support, they are categorized as NuBus (not supported by &debian;), OldWorld, and NewWorld."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:894
+#: hardware.xml:890
 #, no-c-format
 msgid "OldWorld systems are most Power Macintoshes with a floppy drive and a PCI bus. Most 603, 603e, 604, and 604e based Power Macintoshes are OldWorld machines. Those pre-iMac PowerPC models from Apple use a four digit naming scheme, except for the beige colored G3 systems, which are also OldWorld."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:902
+#: hardware.xml:898
 #, no-c-format
 msgid "The so called NewWorld PowerMacs are any PowerMacs in translucent colored plastic cases and later models. That includes all iMacs, iBooks, G4 systems, blue colored G3 systems, and most PowerBooks manufactured in and after 1999. The NewWorld PowerMacs are also known for using the <quote>ROM in RAM</quote> system for MacOS, and were manufactured from mid-1998 onwards."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:910
+#: hardware.xml:906
 #, no-c-format
 msgid "Specifications for Apple hardware are available at <ulink url=\"http://www.info.apple.com/support/applespec.html\">AppleSpec</ulink>, and, for older hardware, <ulink url=\"http://www.info.apple.com/support/applespec.legacy/index.html\">AppleSpec Legacy</ulink>."
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:926 hardware.xml:1061 hardware.xml:1105 hardware.xml:1138
+#: hardware.xml:922 hardware.xml:1057 hardware.xml:1101 hardware.xml:1134
 #, no-c-format
 msgid "Model Name/Number"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:927
+#: hardware.xml:923
 #, no-c-format
 msgid "Generation"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:933
+#: hardware.xml:929
 #, no-c-format
 msgid "Apple"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:934
+#: hardware.xml:930
 #, no-c-format
 msgid "iMac Bondi Blue, 5 Flavors, Slot Loading"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:935 hardware.xml:938 hardware.xml:941 hardware.xml:944 hardware.xml:947 hardware.xml:950 hardware.xml:953 hardware.xml:956 hardware.xml:959 hardware.xml:962 hardware.xml:965 hardware.xml:968 hardware.xml:971 hardware.xml:974 hardware.xml:977 hardware.xml:980
+#: hardware.xml:931 hardware.xml:934 hardware.xml:937 hardware.xml:940 hardware.xml:943 hardware.xml:946 hardware.xml:949 hardware.xml:952 hardware.xml:955 hardware.xml:958 hardware.xml:961 hardware.xml:964 hardware.xml:967 hardware.xml:970 hardware.xml:973 hardware.xml:976
 #, no-c-format
 msgid "NewWorld"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:937
+#: hardware.xml:933
 #, no-c-format
 msgid "iMac Summer 2000, Early 2001"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:940
+#: hardware.xml:936
 #, no-c-format
 msgid "iMac G5"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:943
+#: hardware.xml:939
 #, no-c-format
 msgid "iBook, iBook SE, iBook Dual USB"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:946
+#: hardware.xml:942
 #, no-c-format
 msgid "iBook2"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:949
+#: hardware.xml:945
 #, no-c-format
 msgid "iBook G4"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:952
+#: hardware.xml:948
 #, no-c-format
 msgid "Power Macintosh Blue and White (B&amp;W) G3"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:955
+#: hardware.xml:951
 #, no-c-format
 msgid "Power Macintosh G4 PCI, AGP, Cube"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:958
+#: hardware.xml:954
 #, no-c-format
 msgid "Power Macintosh G4 Gigabit Ethernet"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:961
+#: hardware.xml:957
 #, no-c-format
 msgid "Power Macintosh G4 Digital Audio, Quicksilver"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:964
+#: hardware.xml:960
 #, no-c-format
 msgid "Power Macintosh G5"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:967
+#: hardware.xml:963
 #, no-c-format
 msgid "PowerBook G3 FireWire Pismo (2000)"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:970
+#: hardware.xml:966
 #, no-c-format
 msgid "PowerBook G3 Lombard (1999)"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:973
+#: hardware.xml:969
 #, no-c-format
 msgid "PowerBook G4 Titanium"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:976
+#: hardware.xml:972
 #, no-c-format
 msgid "PowerBook G4 Aluminum"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:979
+#: hardware.xml:975
 #, no-c-format
 msgid "Xserve G5"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:982
+#: hardware.xml:978
 #, no-c-format
 msgid "Performa 4400, 54xx, 5500"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:983 hardware.xml:986 hardware.xml:989 hardware.xml:992 hardware.xml:995 hardware.xml:998 hardware.xml:1001 hardware.xml:1004 hardware.xml:1007 hardware.xml:1010 hardware.xml:1013 hardware.xml:1016 hardware.xml:1022 hardware.xml:1025 hardware.xml:1031 hardware.xml:1037 hardware.xml:1043
+#: hardware.xml:979 hardware.xml:982 hardware.xml:985 hardware.xml:988 hardware.xml:991 hardware.xml:994 hardware.xml:997 hardware.xml:1000 hardware.xml:1003 hardware.xml:1006 hardware.xml:1009 hardware.xml:1012 hardware.xml:1018 hardware.xml:1021 hardware.xml:1027 hardware.xml:1033 hardware.xml:1039
 #, no-c-format
 msgid "OldWorld"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:985
+#: hardware.xml:981
 #, no-c-format
 msgid "Performa 6360, 6400, 6500"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:988
+#: hardware.xml:984
 #, no-c-format
 msgid "Power Macintosh 4400, 5400"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:991
+#: hardware.xml:987
 #, no-c-format
 msgid "Power Macintosh 7200, 7300, 7500, 7600"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:994
+#: hardware.xml:990
 #, no-c-format
 msgid "Power Macintosh 8200, 8500, 8600"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:997
+#: hardware.xml:993
 #, no-c-format
 msgid "Power Macintosh 9500, 9600"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:1000
+#: hardware.xml:996
 #, no-c-format
 msgid "Power Macintosh (Beige) G3 Minitower"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:1003
+#: hardware.xml:999
 #, no-c-format
 msgid "Power Macintosh (Beige) Desktop, All-in-One"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:1006
+#: hardware.xml:1002
 #, no-c-format
 msgid "PowerBook 2400, 3400, 3500"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:1009
+#: hardware.xml:1005
 #, no-c-format
 msgid "PowerBook G3 Wallstreet (1998)"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:1012
+#: hardware.xml:1008
 #, no-c-format
 msgid "Twentieth Anniversary Macintosh"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:1015
+#: hardware.xml:1011
 #, no-c-format
 msgid "Workgroup Server 7250, 7350, 8550, 9650, G3"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:1020
+#: hardware.xml:1016
 #, no-c-format
 msgid "Power Computing"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:1021
+#: hardware.xml:1017
 #, no-c-format
 msgid "PowerBase, PowerTower / Pro, PowerWave"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:1024
+#: hardware.xml:1020
 #, no-c-format
 msgid "PowerCenter / Pro, PowerCurve"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:1029
+#: hardware.xml:1025
 #, no-c-format
 msgid "UMAX"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:1030
+#: hardware.xml:1026
 #, no-c-format
 msgid "C500, C600, J700, S900"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:1035
+#: hardware.xml:1031
 #, no-c-format
 msgid "<entry>APS</entry>"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:1036
+#: hardware.xml:1032
 #, no-c-format
 msgid "APS Tech M*Power 604e/2000"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:1041 hardware.xml:1067
+#: hardware.xml:1037 hardware.xml:1063
 #, no-c-format
 msgid "Motorola"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:1042
+#: hardware.xml:1038
 #, no-c-format
 msgid "Starmax 3000, 4000, 5000, 5500"
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:1051
+#: hardware.xml:1047
 #, no-c-format
 msgid "PReP subarchitecture"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:1068
+#: hardware.xml:1064
 #, no-c-format
 msgid "Firepower, PowerStack Series E, PowerStack II"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:1070
+#: hardware.xml:1066
 #, no-c-format
 msgid "MPC 7xx, 8xx"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:1072
+#: hardware.xml:1068
 #, no-c-format
 msgid "MTX, MTX+"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:1074
+#: hardware.xml:1070
 #, no-c-format
 msgid "MVME2300(SC)/24xx/26xx/27xx/36xx/46xx"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:1076
+#: hardware.xml:1072
 #, no-c-format
 msgid "MCP(N)750"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:1080 hardware.xml:1111
+#: hardware.xml:1076 hardware.xml:1107
 #, no-c-format
 msgid "IBM RS/6000"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:1081
+#: hardware.xml:1077
 #, no-c-format
 msgid "40P, 43P"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:1083
+#: hardware.xml:1079
 #, no-c-format
 msgid "Power 830/850/860 (6070, 6050)"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:1085
+#: hardware.xml:1081
 #, no-c-format
 msgid "6030, 7025, 7043"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:1087
+#: hardware.xml:1083
 #, no-c-format
 msgid "p640"
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:1095
+#: hardware.xml:1091
 #, no-c-format
 msgid "CHRP subarchitecture"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:1112
+#: hardware.xml:1108
 #, no-c-format
 msgid "B50, 43P-150, 44P"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:1115
+#: hardware.xml:1111
 #, no-c-format
 msgid "Genesi"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:1116
+#: hardware.xml:1112
 #, no-c-format
 msgid "Pegasos I, Pegasos II"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:1119
+#: hardware.xml:1115
 #, no-c-format
 msgid "Fixstars"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:1120
+#: hardware.xml:1116
 #, no-c-format
 msgid "YDL PowerStation"
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:1128
+#: hardware.xml:1124
 #, no-c-format
 msgid "APUS subarchitecture (unsupported)"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:1144
+#: hardware.xml:1140
 #, no-c-format
 msgid "Amiga Power-UP Systems (APUS)"
 msgstr ""
 
 #. Tag: entry
-#: hardware.xml:1145
+#: hardware.xml:1141
 #, no-c-format
 msgid "A1200, A3000, A4000"
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:1153
+#: hardware.xml:1149
 #, no-c-format
 msgid "Nubus PowerMac subarchitecture (unsupported)"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1155
+#: hardware.xml:1151
 #, no-c-format
 msgid "NuBus systems are not currently supported by &debian;/powerpc. The monolithic Linux/PPC kernel architecture does not have support for these machines; instead, one must use the MkLinux Mach microkernel, which &debian; does not yet support. These include the following: <itemizedlist> <listitem><para> Power Macintosh 6100, 7100, 8100 </para></listitem> <listitem><para> Performa 5200, 6200, 6300 </para></listitem> <listitem><para> Powerbook 1400, 2300, and 5300 </para></listitem> <listitem><para> Workgroup Server 6150, 8150, 9150 </para></listitem> </itemizedlist> A linux kernel for these machines and limited support is available at <ulink url=\"http://nubus-pmac.sourceforge.net/\"></ulink>."
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:1192
+#: hardware.xml:1188
 #, no-c-format
 msgid "Non-PowerPC Macs"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1194
+#: hardware.xml:1190
 #, no-c-format
 msgid "Macintosh computers using the 680x0 series of processors are <emphasis>not</emphasis> in the PowerPC family but are instead m68k machines. Those models start with <quote>Mac II</quote> series, go on to the <quote>LC</quote> family, then the Centris series, and culminate in the Quadras and Performas. These models usually have a Roman numeral or 3-digit model number such as Mac IIcx, LCIII or Quadra 950."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1203
+#: hardware.xml:1199
 #, no-c-format
 msgid "This model range started with the Mac II (Mac II, IIx, IIcx, IIci, IIsi, IIvi, IIvx, IIfx), then the LC (LC, LCII, III, III+, 475, 520, 550, 575, 580, 630), then the Mac TV, then the Centris (610, 650, 660AV), the Quadra (605, 610, 630, 650, 660AV, 700, 800, 840AV, 900, 950), and finally the Performa 200-640CD."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1211
+#: hardware.xml:1207
 #, no-c-format
 msgid "In laptops, it started with the Mac Portable, then the PowerBook 100-190cs and the PowerBook Duo 210-550c (excluding PowerBook 500 which is Nubus, please see the section above)."
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:1227
+#: hardware.xml:1223
 #, no-c-format
 msgid "zSeries and System z machine types"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1228
+#: hardware.xml:1224
 #, no-c-format
 msgid "Since &debian; Squeeze, support for booting in ESA/390 mode was dropped. Your machine needs to support the z/Architecture, 64-bit support is mandatory. The userland of the s390 port is still compiled for ESA/390, though. All zSeries and System z hardware is fully supported. &arch-title; support software is included from the kernel 3.1 development stream. The most current information about IBM's Linux support can be found at the <ulink url=\"http://www.ibm.com/developerworks/linux/linux390/development_technical.html\"> Linux on <trademark class=\"registered\">System z</trademark> page on developerWorks</ulink>."
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:1245
+#: hardware.xml:1241
 #, no-c-format
 msgid "PAV and HyperPAV"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1246
+#: hardware.xml:1242
 #, no-c-format
 msgid "PAV and HyperPAV are supported transparently, multipathing is not needed to take advantage of these storage system features. Be sure to configure the devices during DASD device selection. The alias devices will not be offered neither for formatting, partitioning nor direct use."
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:1262
+#: hardware.xml:1258
 #, no-c-format
 msgid "CPU and Main Boards Support"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1263
+#: hardware.xml:1259
 #, no-c-format
 msgid "Sparc-based hardware is divided into a number of different subarchitectures, identified by one of the following names: sun4, sun4c, sun4d, sun4m, sun4u or sun4v. The following list describes what machines they include and what level of support may be expected for each of them."
 msgstr ""
 
 #. Tag: term
-#: hardware.xml:1274
+#: hardware.xml:1270
 #, no-c-format
 msgid "sun4, sun4c, sun4d, sun4m"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1276
+#: hardware.xml:1272
 #, no-c-format
 msgid "None of these 32-bit sparc subarchitectures (sparc32) is supported. For a complete list of machines belonging to these subarchitectures, please consult the <ulink url=\"http://en.wikipedia.org/wiki/SPARCstation\">Wikipedia SPARCstation page</ulink>."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1283
+#: hardware.xml:1279
 #, no-c-format
 msgid "The last &debian; release to support sparc32 was Etch, but even then only for sun4m systems. Support for the other 32-bits subarchitectures had already been discontinued after earlier releases."
 msgstr ""
 
 #. Tag: term
-#: hardware.xml:1293
+#: hardware.xml:1289
 #, no-c-format
 msgid "sun4u"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1295
+#: hardware.xml:1291
 #, no-c-format
 msgid "This subarchitecture includes all 64-bit machines (sparc64) based on the UltraSparc processor and its clones. Most of the machines are well supported, even though for some you may experience problems booting from CD due to firmware or bootloader bugs (this problem may be worked around by using netbooting). Use the sparc64 or sparc64-smp kernel in UP and SMP configurations respectively."
 msgstr ""
 
 #. Tag: term
-#: hardware.xml:1308
+#: hardware.xml:1304
 #, no-c-format
 msgid "sun4v"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1310
+#: hardware.xml:1306
 #, no-c-format
 msgid "This is the newest addition to the Sparc family, which includes machines based on the Niagara multi-core CPUs. At the moment such CPUs are only available in T1000 and T2000 servers by Sun, and are well supported. Use the sparc64-smp kernel."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1321
+#: hardware.xml:1317
 #, no-c-format
 msgid "Note that Fujitsu's SPARC64 CPUs used in PRIMEPOWER family of servers are not supported due to lack of support in the Linux kernel."
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:1330
+#: hardware.xml:1326
 #, no-c-format
 msgid "Laptops"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1331
+#: hardware.xml:1327
 #, no-c-format
 msgid "From a technical point of view, laptops are normal PCs, so all information regarding PC systems applies to laptops as well. Installations on laptops nowadays usually work out of the box, including things like automatically suspending the system on closing the lid and laptop specfic hardware buttons like those for disabling the wifi interfaces (<quote>airplane mode</quote>). Nonetheless sometimes the hardware vendors use specialized or proprietary hardware for some laptop-specific functions which might not be supported. To see if your particular laptop works well with GNU/Linux, see for example the <ulink url=\"&url-x86-laptop;\">Linux Laptop pages</ulink>."
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:1348 hardware.xml:1368 hardware.xml:1395 hardware.xml:1418
+#: hardware.xml:1344 hardware.xml:1364 hardware.xml:1391 hardware.xml:1414
 #, no-c-format
 msgid "Multiple Processors"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1349
+#: hardware.xml:1345
 #, no-c-format
 msgid "Multiprocessor support &mdash; also called <quote>symmetric multiprocessing</quote> or SMP &mdash; is available for this architecture. Having multiple processors in a computer was originally only an issue for high-end server systems but has become common in recent years nearly everywhere with the introduction of so called <quote>multi-core</quote> processors. These contain two or more processor units, called <quote>cores</quote>, in one physical chip."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1359
+#: hardware.xml:1355
 #, no-c-format
 msgid "The standard &debian; &release; kernel image has been compiled with SMP support. It is also usable on non-SMP systems without problems."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1370
+#: hardware.xml:1366
 #, no-c-format
 msgid "Multiprocessor support &mdash; also called <quote>symmetric multiprocessing</quote> or SMP &mdash; is available for this architecture. The standard &debian; &release; kernel image has been compiled with <firstterm>SMP-alternatives</firstterm> support. This means that the kernel will detect the number of processors (or processor cores) and will automatically deactivate SMP on uniprocessor systems."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1379
+#: hardware.xml:1375
 #, no-c-format
 msgid "Having multiple processors in a computer was originally only an issue for high-end server systems but has become common in recent years nearly everywhere with the introduction of so called <quote>multi-core</quote> processors. These contain two or more processor units, called <quote>cores</quote>, in one physical chip."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1386
+#: hardware.xml:1382
 #, no-c-format
 msgid "The 486 flavour of the &debian; kernel image packages for &arch-title; is not compiled with SMP support."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1396
+#: hardware.xml:1392
 #, no-c-format
 msgid "Multiprocessor support &mdash; also called <quote>symmetric multiprocessing</quote> or SMP &mdash; is available for this architecture. However, the standard &debian; &release; kernel image does not support SMP. This should not prevent installation, since the standard, non-SMP kernel should boot on SMP systems; the kernel will simply use only the first CPU."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1405
+#: hardware.xml:1401
 #, no-c-format
 msgid "In order to take advantage of multiple processors, you'll have to replace the standard &debian; kernel.<phrase arch=\"linux-any\"> You can find a discussion of how to do this in <xref linkend=\"kernel-baking\"/>. At this time (kernel version &kernelversion;) the way you enable SMP is to select <quote>&smp-config-option;</quote> in the <quote>&smp-config-section;</quote> section of the kernel config.</phrase>"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1419
+#: hardware.xml:1415
 #, no-c-format
 msgid "Multiprocessor support &mdash; also called <quote>symmetric multiprocessing</quote> or SMP &mdash; is available for this architecture, and is supported by a precompiled &debian; kernel image. Depending on your install media, this SMP-capable kernel may or may not be installed by default. This should not prevent installation, since the standard, non-SMP kernel should boot on SMP systems; the kernel will simply use the first CPU."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1429
+#: hardware.xml:1425
 #, no-c-format
 msgid "In order to take advantage of multiple processors, you should check to see if a kernel package that supports SMP is installed, and if not, choose an appropriate kernel package."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1435
+#: hardware.xml:1431
 #, no-c-format
 msgid "You can also build your own customized kernel to support SMP.<phrase arch=\"linux-any\"> You can find a discussion of how to do this in <xref linkend=\"kernel-baking\"/>. At this time (kernel version &kernelversion;) the way you enable SMP is to select <quote>&smp-config-option;</quote> in the <quote>&smp-config-section;</quote> section of the kernel config.</phrase>"
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:1446
+#: hardware.xml:1442
 #, no-c-format
 msgid "Graphics Card Support"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1447
+#: hardware.xml:1443
 #, no-c-format
 msgid "&debian;'s support for graphical interfaces is determined by the underlying support found in X.Org's X11 system. On modern PCs, having a graphical display usually works out of the box. Whether advanced graphics card features such as 3D-hardware acceleration or hardware-accelerated video are available, depends on the actual graphics hardware used in the system and in some cases on the installation of additional <quote>firmware</quote> images (see <xref linkend=\"hardware-firmware\"/>). In very few cases there have been reports about hardware on which installation of additional graphics card firmware was required even for basic graphics support, but these have been rare exceptions."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1460
+#: hardware.xml:1456
 #, no-c-format
 msgid "Details on supported graphics cards and pointing devices can be found at <ulink url=\"&url-xorg;\"></ulink>. &debian; &release; ships with X.Org version &x11ver;."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1465
+#: hardware.xml:1461
 #, no-c-format
 msgid "The X.Org X Window System is only supported on the SGI Indy and the O2."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1470
+#: hardware.xml:1466
 #, no-c-format
 msgid "Most graphics options commonly found on Sparc-based machines are supported. X.org graphics drivers are available for sunbw2, suncg14, suncg3, suncg6, sunleo and suntcx framebuffers, Creator3D and Elite3D cards (sunffb driver), PGX24/PGX64 ATI-based video cards (ati driver), and PermediaII-based cards (glint driver). To use an Elite3D card with X.org you additionally need to install the <classname>afbinit</classname> package, and read the documentation included with it on how to activate the card."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1480
+#: hardware.xml:1476
 #, no-c-format
 msgid "It is not uncommon for a Sparc machine to have two graphics cards in a default configuration. In such a case there is a possibility that the Linux kernel will not direct its output to the card initially used by the firmware. The lack of output on the graphical console may then be mistaken for a hang (usually the last message seen on console is 'Booting Linux...'). One possible solution is to physically remove one of the video cards; another option is to disable one of the cards using a kernel boot parameter. Also, if graphical output is not required or desired, serial console may be used as an alternative. On some systems use of serial console can be activated automatically by disconnecting the keyboard before booting the system."
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:1502
+#: hardware.xml:1498
 #, no-c-format
 msgid "Network Connectivity Hardware"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1503
+#: hardware.xml:1499
 #, no-c-format
 msgid "Almost any network interface card (NIC) supported by the &arch-kernel; kernel should also be supported by the installation system; drivers should normally be loaded automatically. <phrase arch=\"x86\">This includes most PCI/PCI-Express cards as well as PCMCIA/Express Cards on laptops.</phrase> <phrase arch=\"i386\">Many older ISA cards are supported as well.</phrase>"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1513
+#: hardware.xml:1509
 #, no-c-format
 msgid "This includes a lot of generic PCI cards (for systems that have PCI) and the following NICs from Sun:"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1519
+#: hardware.xml:1515
 #, no-c-format
 msgid "Sun LANCE"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1524
+#: hardware.xml:1520
 #, no-c-format
 msgid "Sun Happy Meal"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1529
+#: hardware.xml:1525
 #, no-c-format
 msgid "Sun BigMAC"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1534
+#: hardware.xml:1530
 #, no-c-format
 msgid "Sun QuadEthernet"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1539
+#: hardware.xml:1535
 #, no-c-format
 msgid "MyriCOM Gigabit Ethernet"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1546
+#: hardware.xml:1542
 #, no-c-format
 msgid "The list of supported network devices is:"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1551
+#: hardware.xml:1547
 #, no-c-format
 msgid "Channel to Channel (CTC) and ESCON connection (real or emulated)"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1556
+#: hardware.xml:1552
 #, no-c-format
 msgid "OSA-2 Token Ring/Ethernet and OSA-Express Fast Ethernet (non-QDIO)"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1561
+#: hardware.xml:1557
 #, no-c-format
 msgid "OSA-Express in QDIO mode, HiperSockets and Guest-LANs"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1570
+#: hardware.xml:1566
 #, no-c-format
 msgid "On &arch-title;, most built-in Ethernet devices are supported and modules for additional PCI and USB devices are provided."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1575
+#: hardware.xml:1571
 #, no-c-format
 msgid "ISDN is supported, but not during the installation."
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:1582
+#: hardware.xml:1578
 #, no-c-format
 msgid "Wireless Network Cards"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1583
+#: hardware.xml:1579
 #, no-c-format
 msgid "Wireless networking is in general supported as well and a growing number of wireless adapters are supported by the official &arch-kernel; kernel, although many of them do require firmware to be loaded."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1590
+#: hardware.xml:1586
 #, no-c-format
 msgid "If firmware is needed, the installer will prompt you to load firmware. See <xref linkend=\"loading-firmware\"/> for detailed information on how to load firmware during the installation."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1595
+#: hardware.xml:1591
 #, no-c-format
 msgid "Wireless NICs that are not supported by the official &arch-kernel; kernel can generally be made to work under &debian-gnu;, but are not supported during the installation."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1600
+#: hardware.xml:1596
 #, no-c-format
 msgid "If there is a problem with wireless and there is no other NIC you can use during the installation, it is still possible to install &debian-gnu; using a full CD-ROM or DVD image. Select the option to not configure a network and install using only the packages available from the CD/DVD. You can then install the driver and firmware you need after the installation is completed (after the reboot) and configure your network manually."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1610
+#: hardware.xml:1606
 #, no-c-format
 msgid "In some cases the driver you need may not be available as a &debian; package. You will then have to look if there is source code available in the internet and compile the driver yourself. How to do this is outside the scope of this manual. <phrase arch=\"x86\">If no Linux driver is available, your last resort is to use the <classname>ndiswrapper</classname> package, which allows you to use a Windows driver.</phrase>"
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:1624
+#: hardware.xml:1620
 #, no-c-format
 msgid "Known Issues for &arch-title;"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1625
+#: hardware.xml:1621
 #, no-c-format
 msgid "There are a couple of issues with specific network cards that are worth mentioning here."
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:1632
+#: hardware.xml:1628
 #, no-c-format
 msgid "Conflict between tulip and dfme drivers"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1634
+#: hardware.xml:1630
 #, no-c-format
 msgid "There are various PCI network cards that have the same PCI identification, but are supported by related, but different drivers. Some cards work with the <literal>tulip</literal> driver, others with the <literal>dfme</literal> driver. Because they have the same identification, the kernel cannot distinguish between them and it is not certain which driver will be loaded. If this happens to be the wrong one, the NIC may not work, or work badly."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1644
+#: hardware.xml:1640
 #, no-c-format
 msgid "This is a common problem on Netra systems with a Davicom (DEC-Tulip compatible) NIC. In that case the <literal>tulip</literal> driver is probably the correct one. You can prevent this issue by blacklisting the wrong driver module as described in <xref linkend=\"module-blacklist\"/>."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1652
+#: hardware.xml:1648
 #, no-c-format
 msgid "An alternative solution during the installation is to switch to a shell and unload the wrong driver module using <userinput>modprobe -r <replaceable>module</replaceable></userinput> (or both, if they are both loaded). After that you can load the correct module using <userinput>modprobe <replaceable>module</replaceable></userinput>. Note that the wrong module may then still be loaded when the system is rebooted."
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:1665
+#: hardware.xml:1661
 #, no-c-format
 msgid "Sun B100 blade"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1667
+#: hardware.xml:1663
 #, no-c-format
 msgid "The <literal>cassini</literal> network driver does not work with Sun B100 blade systems."
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:1682
+#: hardware.xml:1678
 #, no-c-format
 msgid "Braille Displays"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1683
+#: hardware.xml:1679
 #, no-c-format
 msgid "Support for braille displays is determined by the underlying support found in <classname>brltty</classname>. Most displays work under <classname>brltty</classname>, connected via either a serial port, USB or bluetooth. Details on supported braille devices can be found on the <ulink url=\"&url-brltty;\"><classname>brltty</classname> website</ulink>. &debian-gnu; &release; ships with <classname>brltty</classname> version &brlttyver;."
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:1697
+#: hardware.xml:1693
 #, no-c-format
 msgid "Hardware Speech Synthesis"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1698
+#: hardware.xml:1694
 #, no-c-format
 msgid "Support for hardware speech synthesis devices is determined by the underlying support found in <classname>speakup</classname>. <classname>speakup</classname> only supports integrated boards and external devices connected to a serial port (no USB, serial-to-USB or PCI adapters are supported). Details on supported hardware speech synthesis devices can be found on the <ulink url=\"&url-speakup;\"><classname>speakup</classname> website</ulink>. &debian-gnu; &release; ships with <classname>speakup</classname> version &speakupver;."
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:1718
+#: hardware.xml:1714
 #, no-c-format
 msgid "Peripherals and Other Hardware"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1719
+#: hardware.xml:1715
 #, no-c-format
 msgid "&arch-kernel; supports a large variety of hardware devices such as mice, printers, scanners, PCMCIA/CardBus/ExpressCard and USB devices. However, most of these devices are not required while installing the system."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1725
+#: hardware.xml:1721
 #, no-c-format
 msgid "USB hardware generally works fine. On some very old PC systems some USB keyboards may require additional configuration (see <xref linkend=\"hardware-issues\"/>). On modern PCs, USB keyboards and mice work without requiring any specific configuration."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1734
+#: hardware.xml:1730
 #, no-c-format
 msgid "Package installations from XPRAM and tape are not supported by this system. All packages that you want to install need to be available on a DASD or over the network using NFS, HTTP or FTP."
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:1747
+#: hardware.xml:1743
 #, no-c-format
 msgid "Devices Requiring Firmware"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1748
+#: hardware.xml:1744
 #, no-c-format
 msgid "Besides the availability of a device driver, some hardware also requires so-called <firstterm>firmware</firstterm> or <firstterm>microcode</firstterm> to be loaded into the device before it can become operational. This is most common for network interface cards (especially wireless NICs), but for example some USB devices and even some hard disk controllers also require firmware. With many graphics cards, basic functionality is available without additional firmware, but the use of advanced features requires an appropriate firmware file to be installed in the system."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1759
+#: hardware.xml:1755
 #, no-c-format
 msgid "On many older devices which require firmware to work, the firmware file was permanently placed in an EEPROM/Flash chip on the device itself by the manufacturer. Nowadays most new devices do not have the firmware embedded this way anymore, so the firmware file must be uploaded into the device by the host operating system every time the system boots."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1767
+#: hardware.xml:1763
 #, no-c-format
 msgid "In most cases firmware is non-free according to the criteria used by the &debian-gnu; project and thus cannot be included in the main distribution or in the installation system. If the device driver itself is included in the distribution and if &debian-gnu; legally can distribute the firmware, it will often be available as a separate package from the non-free section of the archive."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1776
+#: hardware.xml:1772
 #, no-c-format
 msgid "However, this does not mean that such hardware cannot be used during an installation. Starting with &debian-gnu; 5.0, &d-i; supports loading firmware files or packages containing firmware from a removable medium, such as a USB stick. See <xref linkend=\"loading-firmware\"/> for detailed information on how to load firmware files or packages during the installation."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1785
+#: hardware.xml:1781
 #, no-c-format
 msgid "If the &d-i; prompts for a firmware file and you do not have this firmware file available or do not want to install a non-free firmware file on your system, you can try to proceed without loading the firmware. There are several cases where a driver prompts for additional firmware because it may be needed under certain circumstances, but the device does work without it on most systems (this e.g. happens with certain network cards using the tg3 driver)."
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:1802
+#: hardware.xml:1798
 #, no-c-format
 msgid "Purchasing Hardware Specifically for GNU/&arch-kernel;"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1804
+#: hardware.xml:1800
 #, no-c-format
 msgid "There are several vendors, who ship systems with &debian; or other distributions of GNU/Linux <ulink url=\"&url-pre-installed;\">pre-installed</ulink>. You might pay more for the privilege, but it does buy a level of peace of mind, since you can be sure that the hardware is well-supported by GNU/Linux."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1812
+#: hardware.xml:1808
 #, no-c-format
 msgid "If you do have to buy a machine with Windows bundled, carefully read the software license that comes with Windows; you may be able to reject the license and obtain a rebate from your vendor. Searching the Internet for <quote>windows refund</quote> may get you some useful information to help with that."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1820
+#: hardware.xml:1816
 #, no-c-format
 msgid "Whether or not you are purchasing a system with &arch-kernel; bundled, or even a used system, it is still important to check that your hardware is supported by the &arch-kernel; kernel. Check if your hardware is listed in the references found above. Let your salesperson (if any) know that you're shopping for a &arch-kernel; system. Support &arch-kernel;-friendly hardware vendors."
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:1831
+#: hardware.xml:1827
 #, no-c-format
 msgid "Avoid Proprietary or Closed Hardware"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1832
+#: hardware.xml:1828
 #, no-c-format
 msgid "Some hardware manufacturers simply won't tell us how to write drivers for their hardware. Others won't allow us access to the documentation without a non-disclosure agreement that would prevent us from releasing the driver's source code, which is one of the central elements of free software. Since we haven't been granted access to usable documentation on these devices, they simply won't work under &arch-kernel;."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1842
+#: hardware.xml:1838
 #, no-c-format
 msgid "In many cases there are standards (or at least some de-facto standards) describing how an operating system and its device drivers communicate with a certain class of devices. All devices which comply to such a (de-facto-)standard can be used with a single generic device driver and no device-specific drivers are required. With some kinds of hardware (e.g. USB <quote>Human Interface Devices</quote>, i.e. keyboards, mice, etc., and USB mass storage devices like USB flash disks and memory card readers) this works very well and practically every device sold in the market is standards-compliant."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1854
+#: hardware.xml:1850
 #, no-c-format
 msgid "In other fields, among them e.g. printers, this is unfortunately not the case. While there are many printers which can be addressed via a small set of (de-facto-)standard control languages and therefore can be made to work without problems in any operating system, there are quite a few models which only understand proprietary control commands for which no usable documentation is available and therefore either cannot be used at all on free operating systems or can only be used with a vendor-supplied closed-source driver."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1865
+#: hardware.xml:1861
 #, no-c-format
 msgid "Even if there is a vendor-provided closed-source driver for such hardware when purchasing the device, the practical lifespan of the device is limited by driver availability. Nowadays product cycles have become short and it is not uncommon that a short time after a consumer device has ceased production, no driver updates get made available any more by the manufacturer. If the old closed-source driver does not work anymore after a system update, an otherwise perfectly working device becomes unusable due to lacking driver support and there is nothing that can be done in this case. You should therefore avoid buying closed hardware in the first place, regardless of the operating system you want to use it with."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1878
+#: hardware.xml:1874
 #, no-c-format
 msgid "You can help improve this situation by encouraging manufacturers of closed hardware to release the documentation and other resources necessary for us to provide free drivers for their hardware."
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:1893
+#: hardware.xml:1889
 #, no-c-format
 msgid "Installation Media"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1895
+#: hardware.xml:1891
 #, no-c-format
 msgid "This section will help you determine which different media types you can use to install &debian;. There is a whole chapter devoted to media, <xref linkend=\"install-methods\"/>, which lists the advantages and disadvantages of each media type. You may want to refer back to this page once you reach that section."
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:1905
+#: hardware.xml:1901
 #, no-c-format
 msgid "Floppies"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1906
+#: hardware.xml:1902
 #, no-c-format
 msgid "In some cases, you'll have to do your first boot from floppy disks. Generally, all you will need is a high-density (1440 kilobytes) 3.5 inch floppy drive."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1912
+#: hardware.xml:1908
 #, no-c-format
 msgid "For CHRP, floppy support is currently broken."
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:1919
+#: hardware.xml:1915
 #, no-c-format
 msgid "CD-ROM/DVD-ROM"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1921
+#: hardware.xml:1917
 #, no-c-format
 msgid "Whenever you see <quote>CD-ROM</quote> in this manual, it applies to both CD-ROMs and DVD-ROMs, because both technologies are really the same from the operating system's point of view."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1927
+#: hardware.xml:1923
 #, no-c-format
 msgid "CD-ROM based installation is supported for most architectures."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1931
+#: hardware.xml:1927
 #, no-c-format
 msgid "On PCs SATA, IDE/ATAPI and SCSI CD-ROMs are supported."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1935
+#: hardware.xml:1931
 #, no-c-format
 msgid "USB CD-ROM drives are also supported, as are FireWire devices that are supported by the ohci1394 and sbp2 drivers."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1940
+#: hardware.xml:1936
 #, no-c-format
 msgid "IDE/ATAPI CD-ROMs are supported on all ARM machines."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1944
+#: hardware.xml:1940
 #, no-c-format
 msgid "On SGI machines, booting from CD-ROM requires a SCSI CD-ROM drive capable of working with a logical blocksize of 512 bytes. Many of the SCSI CD-ROM drives sold on the PC market do not have this capability. If your CD-ROM drive has a jumper labeled <quote>Unix/PC</quote> or <quote>512/2048</quote>, place it in the <quote>Unix</quote> or <quote>512</quote> position. To start the install, simply choose the <quote>System installation</quote> entry in the firmware."
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:1958
+#: hardware.xml:1954
 #, no-c-format
 msgid "USB Memory Stick"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1960
+#: hardware.xml:1956
 #, no-c-format
 msgid "USB flash disks a.k.a. USB memory sticks have become a commonly used and cheap storage device. Most modern computer systems also allow booting the &d-i; from such a stick. Many modern computer systems, in particular netbooks and thin laptops, do not have a CD/DVD-ROM drive anymore at all and booting from USB media ist the standard way of installing a new operating system on them."
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:1972
+#: hardware.xml:1968
 #, no-c-format
 msgid "Network"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1974
+#: hardware.xml:1970
 #, no-c-format
 msgid "The network can be used during the installation to retrieve files needed for the installation. Whether the network is used or not depends on the installation method you choose and your answers to certain questions that will be asked during the installation. The installation system supports most types of network connections (including PPPoE, but not ISDN or PPP), via either HTTP or FTP. After the installation is completed, you can also configure your system to use ISDN and PPP."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1984
+#: hardware.xml:1980
 #, no-c-format
 msgid "You can also <emphasis>boot</emphasis> the installation system over the network without needing any local media like CDs/DVDs or USB sticks. If you already have a netboot-infrastructure available (i.e. you are already running DHCP and TFTP services in your network), this allows an easy and fast deployment of a large number of machines. Setting up the necessary infrastructure requires a certain level of technical experience, so this is not recommended for novice users. <phrase arch=\"mips;mipsel\">This is the preferred installation technique for &arch-title;.</phrase>"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1997
+#: hardware.xml:1993
 #, no-c-format
 msgid "Diskless installation, using network booting from a local area network and NFS-mounting of all local filesystems, is another option."
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:2006
+#: hardware.xml:2002
 #, no-c-format
 msgid "Hard Disk"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:2008
+#: hardware.xml:2004
 #, no-c-format
 msgid "Booting the installation system directly from a hard disk is another option for many architectures. This will require some other operating system to load the installer onto the hard disk. This method is only recommended for special cases when no other installation method is available."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:2015
+#: hardware.xml:2011
 #, no-c-format
 msgid "Although the &arch-title; does not allow booting from SunOS (Solaris), you can install from a SunOS partition (UFS slices)."
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:2024
+#: hardware.xml:2020
 #, no-c-format
 msgid "Un*x or GNU system"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:2026
+#: hardware.xml:2022
 #, no-c-format
 msgid "If you are running another Unix-like system, you could use it to install &debian-gnu; without using the &d-i; described in the rest of this manual. This kind of install may be useful for users with otherwise unsupported hardware or on hosts which can't afford downtime. If you are interested in this technique, skip to the <xref linkend=\"linux-upgrade\"/>. This installation method is only recommended for advanced users when no other installation method is available."
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:2039
+#: hardware.xml:2035
 #, no-c-format
 msgid "Supported Storage Systems"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:2041
+#: hardware.xml:2037
 #, no-c-format
 msgid "The &debian; installer contains a kernel which is built to maximize the number of systems it runs on."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:2045
+#: hardware.xml:2041
 #, no-c-format
 msgid "Generally, the &debian; installation system includes support for IDE (also known as PATA) drives, SATA and SCSI controllers and drives, USB, and FireWire. The supported file systems include FAT, Win-32 FAT extensions (VFAT) and NTFS."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:2062
+#: hardware.xml:2058
 #, no-c-format
 msgid "Any storage system supported by the Linux kernel is also supported by the boot system. The following SCSI drivers are supported in the default kernel: <itemizedlist> <listitem><para> Sparc ESP </para></listitem> <listitem><para> PTI Qlogic,ISP </para></listitem> <listitem><para> Adaptec AIC7xxx </para></listitem> <listitem><para> NCR and Symbios 53C8XX </para></listitem> </itemizedlist> IDE systems (such as the UltraSPARC 5) are also supported. See <ulink url=\"&url-sparc-linux-faq;\">Linux for SPARC Processors FAQ</ulink> for more information on SPARC hardware supported by the Linux kernel."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:2095
+#: hardware.xml:2091
 #, no-c-format
 msgid "Any storage system supported by the Linux kernel is also supported by the boot system. Note that the current Linux kernel does not support floppies on CHRP systems at all."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:2101
+#: hardware.xml:2097
 #, no-c-format
 msgid "Any storage system supported by the Linux kernel is also supported by the boot system. Note that the current Linux kernel does not support the floppy drive."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:2107
+#: hardware.xml:2103
 #, no-c-format
 msgid "Any storage system supported by the Linux kernel is also supported by the boot system."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:2112
+#: hardware.xml:2108
 #, no-c-format
 msgid "Any storage system supported by the Linux kernel is also supported by the boot system. This means that FBA and ECKD DASDs are supported with the old Linux disk layout (ldl) and the new common S/390 disk layout (cdl)."
 msgstr ""
 
 #. Tag: title
-#: hardware.xml:2129
+#: hardware.xml:2125
 #, no-c-format
 msgid "Memory and Disk Space Requirements"
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:2131
+#: hardware.xml:2127
 #, no-c-format
 msgid "You must have at least &minimum-memory; of memory and &minimum-fs-size; of hard disk space to perform a normal installation. Note that these are fairly minimal numbers. For more realistic figures, see <xref linkend=\"minimum-hardware-reqts\"/>."
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:2138
+#: hardware.xml:2134
 #, no-c-format
 msgid "Installation on systems with less memory<footnote condition=\"gtk\"> <para> Installation images that support the graphical installer require more memory than images that support only the textual installer and should not be used on systems with less than &minimum-memory; of memory. If there is a choice between booting the regular and the graphical installer, the former should be selected. </para> </footnote> or disk space available may be possible but is only advised for experienced users."
 msgstr ""