[SILENT_COMMIT] Update of POT and PO files for the installation-guide

6 files changed, 365 insertions, 222 deletions

diff --git a/po/it/boot-installer.po b/po/it/boot-installer.po
index 774322f41..ea9a676c3 100644
--- a/po/it/boot-installer.po
+++ b/po/it/boot-installer.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual_boot-installer\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2020-05-20 19:14+0000\n"
+"POT-Creation-Date: 2020-07-26 23:02+0000\n"
 "PO-Revision-Date: 2020-04-18 11:35+0200\n"
 "Last-Translator: Luca Monducci <luca.mo@tiscali.it>\n"
 "Language-Team: Italian <debian-l10n-italian@lists.debian.org>\n"
@@ -700,10 +700,18 @@ msgstr ""
 
 #. Tag: para
 #: boot-installer.xml:339
-#, no-c-format
+#, fuzzy, no-c-format
+#| msgid ""
+#| "The autoboot framework in modern U-Boot versions works similar to the "
+#| "boot ordering options in a PC BIOS, i.e. it checks a list of possible "
+#| "boot devices for a valid boot image and starts the first one it finds. If "
+#| "there is no operating system installed, plugging in the USB stick and "
+#| "powering up the system should result in starting the installer. You can "
+#| "also initiate the USB-boot process any time from the U-Boot prompt by "
+#| "entering the <quote>run bootcmd_usb0</quote> command."
 msgid ""
 "The autoboot framework in modern U-Boot versions works similar to the boot "
-"ordering options in a PC BIOS, i.e. it checks a list of possible boot "
+"ordering options in a PC BIOS/UEFI, i.e. it checks a list of possible boot "
 "devices for a valid boot image and starts the first one it finds. If there "
 "is no operating system installed, plugging in the USB stick and powering up "
 "the system should result in starting the installer. You can also initiate "
@@ -1132,12 +1140,17 @@ msgstr "Schede di rete (NIC) o schede madri con supporto PXE"
 
 #. Tag: para
 #: boot-installer.xml:755
-#, no-c-format
+#, fuzzy, no-c-format
+#| msgid ""
+#| "It could be that your Network Interface Card or Motherboard provides PXE "
+#| "boot functionality. This is a <trademark class=\"trade\">Intel</"
+#| "trademark> re-implementation of TFTP boot. If so, you may be able to "
+#| "configure your BIOS to boot from the network."
 msgid ""
 "It could be that your Network Interface Card or Motherboard provides PXE "
 "boot functionality. This is a <trademark class=\"trade\">Intel</trademark> "
 "re-implementation of TFTP boot. If so, you may be able to configure your "
-"BIOS to boot from the network."
+"BIOS/UEFI to boot from the network."
 msgstr ""
 "È possibile che la scheda di rete o la scheda madre supporti la funzione "
 "d'avvio PXE (PXE è una reimplementazione fatta da <trademark class=\"trade"
@@ -4058,11 +4071,15 @@ msgstr ""
 
 #. Tag: para
 #: boot-installer.xml:2936
-#, no-c-format
-msgid ""
-"Check that your BIOS actually supports booting from optical disc (only an "
-"issue for very old systems) and that booting from such media is enabled in "
-"the BIOS."
+#, fuzzy, no-c-format
+#| msgid ""
+#| "Check that your BIOS actually supports booting from optical disc (only an "
+#| "issue for very old systems) and that booting from such media is enabled "
+#| "in the BIOS."
+msgid ""
+"Check that your BIOS/UEFI actually supports booting from optical disc (only "
+"an issue for very old systems) and that booting from such media is enabled "
+"in the BIOS/UEFI."
 msgstr ""
 "Verificare che il BIOS supporti l'avvio da disco ottico (problema che "
 "riguarda solo i sistemi molto vecchi) e che l'avvio da questo supporto sia "
diff --git a/po/it/hardware.po b/po/it/hardware.po
index 2d54c0abd..170aad735 100644
--- a/po/it/hardware.po
+++ b/po/it/hardware.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual_hardware\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2019-09-22 23:04+0000\n"
+"POT-Creation-Date: 2020-07-26 23:02+0000\n"
 "PO-Revision-Date: 2019-09-28 16:47+0200\n"
 "Last-Translator: Luca Monducci <luca.mo@tiscali.it>\n"
 "Language-Team: Italian <debian-l10n-italian@lists.debian.org>\n"
@@ -485,7 +485,16 @@ msgstr ""
 
 #. Tag: para
 #: hardware.xml:285
-#, no-c-format
+#, fuzzy, no-c-format
+#| msgid ""
+#| "The ARM architecture is used mainly in so-called <quote>system-on-chip</"
+#| "quote> (SoC) designs. These SoCs are designed by many different companies "
+#| "with vastly varying hardware components even for the very basic "
+#| "functionality required to bring the system up. System firmware interfaces "
+#| "have been increasingly standardised over time, but especially on older "
+#| "hardware firmware/boot interfaces vary a great deal, so on these systems "
+#| "the Linux kernel has to take care of many system-specific low-level "
+#| "issues which would be handled by the mainboard's BIOS in the PC world."
 msgid ""
 "The ARM architecture is used mainly in so-called <quote>system-on-chip</"
 "quote> (SoC) designs. These SoCs are designed by many different companies "
@@ -494,7 +503,7 @@ msgid ""
 "have been increasingly standardised over time, but especially on older "
 "hardware firmware/boot interfaces vary a great deal, so on these systems the "
 "Linux kernel has to take care of many system-specific low-level issues which "
-"would be handled by the mainboard's BIOS in the PC world."
+"would be handled by the mainboard's BIOS/UEFI in the PC world."
 msgstr ""
 "L'architettura ARM è principalmente usata per i SoC (<quote>system-on-chip</"
 "quote>). I SoC sono progettati da diverse aziende e usano una gran varietà "
diff --git a/po/it/install-methods.po b/po/it/install-methods.po
index bc4fcb603..8ff95ce9c 100644
--- a/po/it/install-methods.po
+++ b/po/it/install-methods.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual_install-methods\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2020-05-29 21:04+0000\n"
+"POT-Creation-Date: 2020-07-26 23:02+0000\n"
 "PO-Revision-Date: 2020-04-18 11:20+0200\n"
 "Last-Translator: Luca Monducci <luca.mo@tiscali.it>\n"
 "Language-Team: Italian <debian-l10n-italian@lists.debian.org>\n"
@@ -1024,18 +1024,24 @@ msgstr "Preparazione dei file per l'avvio da disco fisso"
 
 #. Tag: para
 #: install-methods.xml:644
-#, no-c-format
+#, fuzzy, no-c-format
+#| msgid ""
+#| "The installer may be booted using boot files placed on an existing hard "
+#| "drive partition, either launched from another operating system or by "
+#| "invoking a boot loader directly from the BIOS."
 msgid ""
 "The installer may be booted using boot files placed on an existing hard "
 "drive partition, either launched from another operating system or by "
-"invoking a boot loader directly from the BIOS."
+"invoking a boot loader directly from the BIOS. On modern UEFI systems, the "
+"kernel may be booted directly from the UEFI partition without the need of a "
+"boot loader."
 msgstr ""
 "L'installatore può essere fatto partire usando i file d'avvio scritti su una "
 "partizione già esistente del disco fisso, lanciandoli da un altro sistema "
 "operativo o richiamando un bootloader direttamente dal BIOS."
 
 #. Tag: para
-#: install-methods.xml:650
+#: install-methods.xml:652
 #, no-c-format
 msgid ""
 "A full, <quote>pure network</quote> installation can be achieved using this "
@@ -1047,7 +1053,7 @@ msgstr ""
 "ricerca e la masterizzazione delle immagini dei CD/DVD."
 
 #. Tag: para
-#: install-methods.xml:656
+#: install-methods.xml:658
 #, no-c-format
 msgid ""
 "The installer cannot boot from files on an HFS+ file system. MacOS System "
@@ -1069,7 +1075,7 @@ msgstr ""
 "fra MacOS e Linux, in particolare per i file d'installazione."
 
 #. Tag: para
-#: install-methods.xml:667
+#: install-methods.xml:669
 #, no-c-format
 msgid ""
 "Different programs are used for hard disk installation system booting, "
@@ -1081,14 +1087,14 @@ msgstr ""
 "<quote>OldWorld</quote>."
 
 #. Tag: title
-#: install-methods.xml:676
+#: install-methods.xml:678
 #, no-c-format
 msgid "Hard disk installer booting from Linux using <command>GRUB</command>"
 msgstr ""
 "Avvio da Linux dell'installatore da disco fisso con <command>GRUB</command>"
 
 #. Tag: para
-#: install-methods.xml:678
+#: install-methods.xml:680
 #, no-c-format
 msgid ""
 "This section explains how to add to or even replace an existing linux "
@@ -1098,7 +1104,7 @@ msgstr ""
 "linux esistente usando <command>GRUB</command>."
 
 #. Tag: para
-#: install-methods.xml:684
+#: install-methods.xml:686
 #, no-c-format
 msgid ""
 "At boot time, <command>GRUB</command> supports loading in memory not only "
@@ -1110,7 +1116,7 @@ msgstr ""
 "essere usato come filesystem di root dal kernel."
 
 #. Tag: para
-#: install-methods.xml:690
+#: install-methods.xml:692
 #, no-c-format
 msgid ""
 "Copy the following files from the &debian; archives to a convenient location "
@@ -1120,19 +1126,19 @@ msgstr ""
 "disco fisso, per esempio <filename>/boot/newinstall/</filename>."
 
 #. Tag: para
-#: install-methods.xml:697
+#: install-methods.xml:699
 #, no-c-format
 msgid "<filename>vmlinuz</filename> (kernel binary)"
 msgstr "<filename>vmlinuz</filename> (kernel)"
 
 #. Tag: para
-#: install-methods.xml:702
+#: install-methods.xml:704
 #, no-c-format
 msgid "<filename>initrd.gz</filename> (ramdisk image)"
 msgstr "<filename>initrd.gz</filename> (immagine del ramdisk)"
 
 #. Tag: para
-#: install-methods.xml:709
+#: install-methods.xml:711
 #, no-c-format
 msgid ""
 "If you intend to use the hard drive only for booting and then download "
@@ -1148,7 +1154,7 @@ msgstr ""
 "operazione deve essere fatta con molta attenzione."
 
 #. Tag: para
-#: install-methods.xml:718
+#: install-methods.xml:720
 #, fuzzy, no-c-format
 msgid ""
 "Alternatively, if you intend to keep an existing partition on the hard drive "
@@ -1166,7 +1172,7 @@ msgstr ""
 "l'immagine, senza la necessità della rete."
 
 #. Tag: para
-#: install-methods.xml:726
+#: install-methods.xml:728
 #, no-c-format
 msgid ""
 "Finally, to configure the bootloader proceed to <xref linkend=\"boot-initrd"
@@ -1176,14 +1182,14 @@ msgstr ""
 "initrd\"/>."
 
 #. Tag: title
-#: install-methods.xml:736
+#: install-methods.xml:738
 #, no-c-format
 msgid "Hard disk installer booting from DOS using <command>loadlin</command>"
 msgstr ""
 "Avvio da DOS dell'installatore da disco fisso con <command>loadlin</command>"
 
 #. Tag: para
-#: install-methods.xml:737
+#: install-methods.xml:739
 #, no-c-format
 msgid ""
 "This section explains how to prepare your hard drive for booting the "
@@ -1193,7 +1199,7 @@ msgstr ""
 "avviare l'installatore da DOS usando <command>loadlin</command>."
 
 #. Tag: para
-#: install-methods.xml:742
+#: install-methods.xml:744
 #, no-c-format
 msgid ""
 "Copy the following directories from a &debian; installation image to "
@@ -1203,7 +1209,7 @@ msgstr ""
 "<filename>c:\\</filename>."
 
 #. Tag: para
-#: install-methods.xml:747
+#: install-methods.xml:749
 #, no-c-format
 msgid ""
 "<filename>/&x86-install-dir;</filename> (kernel binary and ramdisk image)"
@@ -1212,19 +1218,19 @@ msgstr ""
 "ramdisk)"
 
 #. Tag: para
-#: install-methods.xml:752
+#: install-methods.xml:754
 #, no-c-format
 msgid "<filename>/tools</filename> (loadlin tool)"
 msgstr "<filename>/tools</filename> (programma loadlin)"
 
 #. Tag: title
-#: install-methods.xml:864
+#: install-methods.xml:866
 #, no-c-format
 msgid "Preparing Files for TFTP Net Booting"
 msgstr "Preparazione dei file per l'avvio TFTP da rete"
 
 #. Tag: para
-#: install-methods.xml:865
+#: install-methods.xml:867
 #, no-c-format
 msgid ""
 "If your machine is connected to a local area network, you may be able to "
@@ -1240,7 +1246,7 @@ msgstr ""
 "per gestire l'avvio della propria macchina."
 
 #. Tag: para
-#: install-methods.xml:873
+#: install-methods.xml:875
 #, no-c-format
 msgid ""
 "You need to set up a TFTP server, and for many machines a DHCP server<phrase "
@@ -1252,7 +1258,7 @@ msgstr ""
 "condition=\"supports-bootp\"> o un server BOOTP</phrase>."
 
 #. Tag: para
-#: install-methods.xml:880
+#: install-methods.xml:882
 #, no-c-format
 msgid ""
 "<phrase condition=\"supports-rarp\">The Reverse Address Resolution Protocol "
@@ -1273,7 +1279,7 @@ msgstr ""
 "BOOTP. Alcuni sistemi possono essere configurati solo tramite DHCP."
 
 #. Tag: para
-#: install-methods.xml:894
+#: install-methods.xml:896
 #, no-c-format
 msgid ""
 "For PowerPC, if you have a NewWorld Power Macintosh machine, it is a good "
@@ -1285,7 +1291,7 @@ msgstr ""
 "non sono capaci di fare l'avvio usando BOOTP."
 
 #. Tag: para
-#: install-methods.xml:900
+#: install-methods.xml:902
 #, no-c-format
 msgid ""
 "Some older HPPA machines (e.g. 715/75) use RBOOTD rather than BOOTP. There "
@@ -1295,7 +1301,7 @@ msgstr ""
 "BOOTP, in &debian; è disponibile il pacchetto <classname>rbootd</classname>."
 
 #. Tag: para
-#: install-methods.xml:905
+#: install-methods.xml:907
 #, no-c-format
 msgid ""
 "The Trivial File Transfer Protocol (TFTP) is used to serve the boot image to "
@@ -1310,7 +1316,7 @@ msgstr ""
 "Solaris) e GNU/Linux."
 
 #. Tag: para
-#: install-methods.xml:913
+#: install-methods.xml:915
 #, no-c-format
 msgid ""
 "For a &debian-gnu; server we recommend <classname>tftpd-hpa</classname>. "
@@ -1324,13 +1330,13 @@ msgstr ""
 "<classname>atftpd</classname>."
 
 #. Tag: title
-#: install-methods.xml:929
+#: install-methods.xml:931
 #, no-c-format
 msgid "Setting up RARP server"
 msgstr "Attivazione di un server RARP"
 
 #. Tag: para
-#: install-methods.xml:930
+#: install-methods.xml:932
 #, no-c-format
 msgid ""
 "To set up RARP, you need to know the Ethernet address (a.k.a. the MAC "
@@ -1349,7 +1355,7 @@ msgstr ""
 "eth0</userinput>."
 
 #. Tag: para
-#: install-methods.xml:942
+#: install-methods.xml:944
 #, no-c-format
 msgid ""
 "On a RARP server system using a Linux kernel or Solaris/SunOS, you use the "
@@ -1373,13 +1379,13 @@ msgstr ""
 "(Solaris 1)."
 
 #. Tag: title
-#: install-methods.xml:963
+#: install-methods.xml:965
 #, no-c-format
 msgid "Setting up a DHCP server"
 msgstr "Attivazione di un server DHCP"
 
 #. Tag: para
-#: install-methods.xml:964
+#: install-methods.xml:966
 #, no-c-format
 msgid ""
 "One free software DHCP server is ISC <command>dhcpd</command>. For &debian-"
@@ -1393,7 +1399,7 @@ msgstr ""
 "etc/dhcp/dhcpd.conf</filename>):"
 
 #. Tag: screen
-#: install-methods.xml:971
+#: install-methods.xml:973
 #, no-c-format
 msgid ""
 "option domain-name \"example.com\";\n"
@@ -1437,7 +1443,7 @@ msgstr ""
 "}"
 
 #. Tag: para
-#: install-methods.xml:973
+#: install-methods.xml:975
 #, no-c-format
 msgid ""
 "In this example, there is one server <replaceable>servername</replaceable> "
@@ -1455,7 +1461,7 @@ msgstr ""
 "recuperato tramite TFTP."
 
 #. Tag: para
-#: install-methods.xml:983
+#: install-methods.xml:985
 #, no-c-format
 msgid ""
 "After you have edited the <command>dhcpd</command> configuration file, "
@@ -1465,13 +1471,13 @@ msgstr ""
 "riavviarlo con <userinput>/etc/init.d/isc-dhcp-server restart</userinput>."
 
 #. Tag: title
-#: install-methods.xml:991
+#: install-methods.xml:993
 #, no-c-format
 msgid "Enabling PXE Booting in the DHCP configuration"
 msgstr "Abilitare l'avvio PXE nella configurazione di DHCP"
 
 #. Tag: para
-#: install-methods.xml:992
+#: install-methods.xml:994
 #, no-c-format
 msgid ""
 "Here is another example for a <filename>dhcp.conf</filename> using the Pre-"
@@ -1542,7 +1548,7 @@ msgstr ""
 "kernel (si consulti <xref linkend=\"tftp-images\"/>)."
 
 #. Tag: para
-#: install-methods.xml:1002
+#: install-methods.xml:1004
 #, no-c-format
 msgid ""
 "If your machine uses UEFI to boot, you will have to specify a boot loader "
@@ -1552,7 +1558,7 @@ msgstr ""
 "idoneo, per esempio"
 
 #. Tag: screen
-#: install-methods.xml:1006
+#: install-methods.xml:1008
 #, no-c-format
 msgid ""
 "group {\n"
@@ -1574,13 +1580,13 @@ msgstr ""
 "}"
 
 #. Tag: title
-#: install-methods.xml:1019
+#: install-methods.xml:1021
 #, no-c-format
 msgid "Setting up a BOOTP server"
 msgstr "Attivazione di un server BOOTP"
 
 #. Tag: para
-#: install-methods.xml:1020
+#: install-methods.xml:1022
 #, no-c-format
 msgid ""
 "There are two BOOTP servers available for GNU/Linux. The first is CMU "
@@ -1595,7 +1601,7 @@ msgstr ""
 "<classname>bootp</classname> e <classname>isc-dhcp-server</classname>."
 
 #. Tag: para
-#: install-methods.xml:1028
+#: install-methods.xml:1030
 #, no-c-format
 msgid ""
 "To use CMU <command>bootpd</command>, you must first uncomment (or add) the "
@@ -1661,7 +1667,7 @@ msgstr ""
 "phrase>"
 
 #. Tag: para
-#: install-methods.xml:1061
+#: install-methods.xml:1063
 #, no-c-format
 msgid ""
 "By contrast, setting up BOOTP with ISC <command>dhcpd</command> is really "
@@ -1686,13 +1692,13 @@ msgstr ""
 "restart</userinput>."
 
 #. Tag: title
-#: install-methods.xml:1080
+#: install-methods.xml:1082
 #, no-c-format
 msgid "Enabling the TFTP Server"
 msgstr "Attivazione di un server TFTP"
 
 #. Tag: para
-#: install-methods.xml:1081
+#: install-methods.xml:1083
 #, no-c-format
 msgid ""
 "To get the TFTP server ready to go, you should first make sure that "
@@ -1702,7 +1708,7 @@ msgstr ""
 "<command>tftpd</command> sia attivo."
 
 #. Tag: para
-#: install-methods.xml:1086
+#: install-methods.xml:1088
 #, no-c-format
 msgid ""
 "In the case of <classname>tftpd-hpa</classname> there are two ways the "
@@ -1718,7 +1724,7 @@ msgstr ""
 "modificata riconfigurando il pacchetto."
 
 #. Tag: para
-#: install-methods.xml:1095
+#: install-methods.xml:1097
 #, no-c-format
 msgid ""
 "Historically, TFTP servers used <filename>/tftpboot</filename> as directory "
@@ -1737,7 +1743,7 @@ msgstr ""
 "in base alla propria configurazione."
 
 #. Tag: para
-#: install-methods.xml:1105
+#: install-methods.xml:1107
 #, no-c-format
 msgid ""
 "All <command>in.tftpd</command> alternatives available in &debian; should "
@@ -1753,7 +1759,7 @@ msgstr ""
 "un ottimo punto di partenza per la diagnosi della causa degli errori."
 
 #. Tag: para
-#: install-methods.xml:1113
+#: install-methods.xml:1115
 #, no-c-format
 msgid ""
 "If you intend to install &debian; on an SGI machine and your TFTP server is "
@@ -1784,13 +1790,13 @@ msgstr ""
 "usate sul server TFTP Linux."
 
 #. Tag: title
-#: install-methods.xml:1135
+#: install-methods.xml:1137
 #, no-c-format
 msgid "Move TFTP Images Into Place"
 msgstr "Posizionamento delle immagini TFTP"
 
 #. Tag: para
-#: install-methods.xml:1136
+#: install-methods.xml:1138
 #, no-c-format
 msgid ""
 "Next, place the TFTP boot image you need, as found in <xref linkend=\"where-"
@@ -1807,7 +1813,7 @@ msgstr ""
 "esiste uno standard."
 
 #. Tag: para
-#: install-methods.xml:1145
+#: install-methods.xml:1147
 #, no-c-format
 msgid ""
 "On NewWorld Power Macintosh machines, you will need to set up the "
@@ -1823,37 +1829,37 @@ msgstr ""
 "<filename>netboot/</filename>:"
 
 #. Tag: filename
-#: install-methods.xml:1156
+#: install-methods.xml:1158
 #, no-c-format
 msgid "vmlinux"
 msgstr "vmlinux"
 
 #. Tag: filename
-#: install-methods.xml:1161
+#: install-methods.xml:1163
 #, no-c-format
 msgid "initrd.gz"
 msgstr "initrd.gz"
 
 #. Tag: filename
-#: install-methods.xml:1166
+#: install-methods.xml:1168
 #, no-c-format
 msgid "yaboot"
 msgstr "yaboot"
 
 #. Tag: filename
-#: install-methods.xml:1171
+#: install-methods.xml:1173
 #, no-c-format
 msgid "yaboot.conf"
 msgstr "yaboot.conf"
 
 #. Tag: filename
-#: install-methods.xml:1176
+#: install-methods.xml:1178
 #, no-c-format
 msgid "boot.msg"
 msgstr "boot.msg"
 
 #. Tag: para
-#: install-methods.xml:1181
+#: install-methods.xml:1183
 #, no-c-format
 msgid ""
 "For PXE booting, everything you should need is set up in the "
@@ -1874,7 +1880,7 @@ msgstr ""
 "efi</filename>)."
 
 #. Tag: para
-#: install-methods.xml:1191
+#: install-methods.xml:1193
 #, no-c-format
 msgid ""
 "For PXE booting, everything you should need is set up in the "
@@ -1890,13 +1896,13 @@ msgstr ""
 "ia64/elilo.efi</filename> come file da avviare a <command>tftpd</command>."
 
 #. Tag: title
-#: install-methods.xml:1203
+#: install-methods.xml:1205
 #, no-c-format
 msgid "SPARC TFTP Booting"
 msgstr "Avvio di macchine SPARC con TFTP"
 
 #. Tag: para
-#: install-methods.xml:1204
+#: install-methods.xml:1206
 #, no-c-format
 msgid ""
 "Some SPARC architectures add the subarchitecture names, such as "
@@ -1928,7 +1934,7 @@ msgstr ""
 "aggiungere il nome della sottoarchitettura."
 
 #. Tag: para
-#: install-methods.xml:1220
+#: install-methods.xml:1222
 #, no-c-format
 msgid ""
 "If you've done all this correctly, giving the command <userinput>boot net</"
@@ -1942,7 +1948,7 @@ msgstr ""
 "del server tftp quale nome è stato usato per richiederla."
 
 #. Tag: para
-#: install-methods.xml:1227
+#: install-methods.xml:1229
 #, no-c-format
 msgid ""
 "You can also force some sparc systems to look for a specific file name by "
@@ -1956,13 +1962,13 @@ msgstr ""
 "nella directory in cui il server TFTP ricerca i file."
 
 #. Tag: title
-#: install-methods.xml:1238
+#: install-methods.xml:1240
 #, no-c-format
 msgid "SGI TFTP Booting"
 msgstr "Avvio di macchine SGI con TFTP"
 
 #. Tag: para
-#: install-methods.xml:1239
+#: install-methods.xml:1241
 #, no-c-format
 msgid ""
 "On SGI machines you can rely on the <command>bootpd</command> to supply the "
@@ -1977,13 +1983,13 @@ msgstr ""
 "filename>."
 
 #. Tag: title
-#: install-methods.xml:1347
+#: install-methods.xml:1349
 #, no-c-format
 msgid "Automatic Installation"
 msgstr "Installazione automatizzata"
 
 #. Tag: para
-#: install-methods.xml:1348
+#: install-methods.xml:1350
 #, no-c-format
 msgid ""
 "For installing on multiple computers it's possible to do fully automatic "
@@ -2000,13 +2006,13 @@ msgstr ""
 "dettagliate."
 
 #. Tag: title
-#: install-methods.xml:1360
+#: install-methods.xml:1362
 #, no-c-format
 msgid "Automatic Installation Using the &debian; Installer"
 msgstr "Installazione automatizzata usando l'Installatore &debian;"
 
 #. Tag: para
-#: install-methods.xml:1361
+#: install-methods.xml:1363
 #, no-c-format
 msgid ""
 "The &debian; Installer supports automating installs via preconfiguration "
@@ -2020,7 +2026,7 @@ msgstr ""
 "domande che sarebbero normalmente poste durante il processo d'installazione."
 
 #. Tag: para
-#: install-methods.xml:1368
+#: install-methods.xml:1370
 #, no-c-format
 msgid ""
 "Full documentation on preseeding including a working example that you can "
diff --git a/po/it/installation-howto.po b/po/it/installation-howto.po
index 3a88d968e..a0f1661b9 100644
--- a/po/it/installation-howto.po
+++ b/po/it/installation-howto.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual_installation-howto\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2020-04-02 09:22+0000\n"
+"POT-Creation-Date: 2020-07-26 23:02+0000\n"
 "PO-Revision-Date: 2020-04-18 11:30+0200\n"
 "Last-Translator: Luca Monducci <luca.mo@tiscali.it>\n"
 "Language-Team: Italian <debian-l10n-italian@lists.debian.org>\n"
@@ -145,10 +145,17 @@ msgstr ""
 
 #. Tag: para
 #: installation-howto.xml:77
-#, no-c-format
+#, fuzzy, no-c-format
+#| msgid ""
+#| "Download whichever type you prefer and burn it to an optical disc. "
+#| "<phrase arch=\"any-x86\">To boot the disc, you may need to change your "
+#| "BIOS configuration, as explained in <xref linkend=\"bios-setup\"/>.</"
+#| "phrase> <phrase arch=\"powerpc\"> To boot a PowerMac from CD, press the "
+#| "<keycap>c</keycap> key while booting. See <xref linkend=\"boot-cd\"/> for "
+#| "other ways to boot from CD. </phrase>"
 msgid ""
 "Download whichever type you prefer and burn it to an optical disc. <phrase "
-"arch=\"any-x86\">To boot the disc, you may need to change your BIOS "
+"arch=\"any-x86\">To boot the disc, you may need to change your BIOS/UEFI "
 "configuration, as explained in <xref linkend=\"bios-setup\"/>.</phrase> "
 "<phrase arch=\"powerpc\"> To boot a PowerMac from CD, press the <keycap>c</"
 "keycap> key while booting. See <xref linkend=\"boot-cd\"/> for other ways to "
@@ -235,11 +242,19 @@ msgstr ""
 
 #. Tag: para
 #: installation-howto.xml:123
-#, no-c-format
-msgid ""
-"Some BIOSes can boot USB storage directly, and some cannot. You may need to "
-"configure your BIOS to enable <quote>USB legacy support</quote>. The boot "
-"device selection menu should show <quote>removable drive</quote> or "
+#, fuzzy, no-c-format
+#| msgid ""
+#| "Some BIOSes can boot USB storage directly, and some cannot. You may need "
+#| "to configure your BIOS to enable <quote>USB legacy support</quote>. The "
+#| "boot device selection menu should show <quote>removable drive</quote> or "
+#| "<quote>USB-HDD</quote> to get it to boot from the USB device. For helpful "
+#| "hints and details, see <xref linkend=\"usb-boot-x86\"/>."
+msgid ""
+"While booting from USB storage is quite common on UEFI systems, this is "
+"somewhat different in the older BIOS world. Some BIOSes can boot USB storage "
+"directly, and some cannot. You may need to configure your BIOS/UEFI to "
+"enable <quote>USB legacy support</quote> or <quote>Legacy support</quote>. "
+"The boot device selection menu should show <quote>removable drive</quote> or "
 "<quote>USB-HDD</quote> to get it to boot from the USB device. For helpful "
 "hints and details, see <xref linkend=\"usb-boot-x86\"/>."
 msgstr ""
@@ -251,7 +266,7 @@ msgstr ""
 "\"usb-boot-x86\"/>."
 
 #. Tag: para
-#: installation-howto.xml:131
+#: installation-howto.xml:134
 #, no-c-format
 msgid ""
 "Booting Macintosh systems from USB storage devices involves manual use of "
@@ -262,13 +277,13 @@ msgstr ""
 "\"usb-boot-powerpc\"/>."
 
 #. Tag: title
-#: installation-howto.xml:140
+#: installation-howto.xml:143
 #, no-c-format
 msgid "Booting from network"
 msgstr "Avvio da rete"
 
 #. Tag: para
-#: installation-howto.xml:141
+#: installation-howto.xml:144
 #, no-c-format
 msgid ""
 "It's also possible to boot &d-i; completely from the net. The various "
@@ -281,7 +296,7 @@ msgstr ""
 "del &d-i;."
 
 #. Tag: para
-#: installation-howto.xml:147
+#: installation-howto.xml:150
 #, no-c-format
 msgid ""
 "The easiest thing to set up is probably PXE netbooting. Untar the file "
@@ -300,13 +315,13 @@ msgstr ""
 "\"install-tftp\"/>."
 
 #. Tag: title
-#: installation-howto.xml:161
+#: installation-howto.xml:164
 #, no-c-format
 msgid "Booting from hard disk"
 msgstr "Avvio da disco fisso"
 
 #. Tag: para
-#: installation-howto.xml:162
+#: installation-howto.xml:165
 #, no-c-format
 msgid ""
 "It's possible to boot the installer using no removable media, but just an "
@@ -328,13 +343,13 @@ msgstr ""
 "spiegato come farlo. </phrase>"
 
 #. Tag: title
-#: installation-howto.xml:179
+#: installation-howto.xml:182
 #, no-c-format
 msgid "Installation"
 msgstr "Installazione"
 
 #. Tag: para
-#: installation-howto.xml:180
+#: installation-howto.xml:183
 #, no-c-format
 msgid ""
 "Once the installer starts, you will be greeted with an initial screen. Press "
@@ -347,7 +362,7 @@ msgstr ""
 "linkend=\"boot-parms\"/>)."
 
 #. Tag: para
-#: installation-howto.xml:186
+#: installation-howto.xml:189
 #, no-c-format
 msgid ""
 "After a while you will be asked to select your language. Use the arrow keys "
@@ -363,7 +378,7 @@ msgstr ""
 "propria nazione, è disponibile anche un elenco con tutti i paesi del mondo."
 
 #. Tag: para
-#: installation-howto.xml:194
+#: installation-howto.xml:197
 #, no-c-format
 msgid ""
 "You may be asked to confirm your keyboard layout. Choose the default unless "
@@ -373,7 +388,7 @@ msgstr ""
 "non si sa cosa scegliere accettare il valore predefinito."
 
 #. Tag: para
-#: installation-howto.xml:199
+#: installation-howto.xml:202
 #, no-c-format
 msgid ""
 "Now sit back while debian-installer detects some of your hardware, and loads "
@@ -383,7 +398,7 @@ msgstr ""
 "carichi i componenti e se stesso dall'immagine per l'installazione."
 
 #. Tag: para
-#: installation-howto.xml:204
+#: installation-howto.xml:207
 #, no-c-format
 msgid ""
 "Next the installer will try to detect your network hardware and set up "
@@ -395,7 +410,7 @@ msgstr ""
 "si ha DHCP, è possibile configurare la rete manualmente."
 
 #. Tag: para
-#: installation-howto.xml:210
+#: installation-howto.xml:213
 #, no-c-format
 msgid ""
 "Setting up the network is followed by the creation of user accounts. By "
@@ -418,7 +433,7 @@ msgstr ""
 "per impersonare root."
 
 #. Tag: para
-#: installation-howto.xml:221
+#: installation-howto.xml:224
 #, no-c-format
 msgid ""
 "The next step is setting up your clock and time zone. The installer will try "
@@ -433,7 +448,7 @@ msgstr ""
 "di sceglierne uno solo se nella nazione ci sono più fusi orari."
 
 #. Tag: para
-#: installation-howto.xml:228
+#: installation-howto.xml:231
 #, no-c-format
 msgid ""
 "Now it is time to partition your disks. First you will be given the "
@@ -450,7 +465,7 @@ msgstr ""
 "<guimenuitem>manuale</guimenuitem> dal menu."
 
 #. Tag: para
-#: installation-howto.xml:236
+#: installation-howto.xml:239
 #, no-c-format
 msgid ""
 "If you have an existing DOS or Windows partition that you want to preserve, "
@@ -467,7 +482,7 @@ msgstr ""
 "specificarne la nuova dimensione."
 
 #. Tag: para
-#: installation-howto.xml:243
+#: installation-howto.xml:246
 #, no-c-format
 msgid ""
 "On the next screen you will see your partition table, how the partitions "
@@ -493,7 +508,7 @@ msgstr ""
 "relative al partizionamento."
 
 #. Tag: para
-#: installation-howto.xml:256
+#: installation-howto.xml:259
 #, no-c-format
 msgid ""
 "Now &d-i; formats your partitions and starts to install the base system, "
@@ -504,7 +519,7 @@ msgstr ""
 "installato il kernel."
 
 #. Tag: para
-#: installation-howto.xml:261
+#: installation-howto.xml:264
 #, no-c-format
 msgid ""
 "The base system that was installed earlier is a working, but very minimal "
@@ -528,7 +543,7 @@ msgstr ""
 "linkend=\"pkgsel\"/> per altri dettagli su questa fase."
 
 #. Tag: para
-#: installation-howto.xml:273
+#: installation-howto.xml:276
 #, no-c-format
 msgid ""
 "The last step is to install a boot loader. If the installer detects other "
@@ -546,7 +561,7 @@ msgstr ""
 "modo da installarlo da qualche altra parte. </phrase>"
 
 #. Tag: para
-#: installation-howto.xml:283
+#: installation-howto.xml:286
 #, no-c-format
 msgid ""
 "&d-i; will now tell you that the installation has finished. Remove the cdrom "
@@ -561,7 +576,7 @@ msgstr ""
 "new\"/>."
 
 #. Tag: para
-#: installation-howto.xml:290
+#: installation-howto.xml:293
 #, no-c-format
 msgid ""
 "If you need more information on the install process, see <xref linkend=\"d-i-"
@@ -571,13 +586,13 @@ msgstr ""
 "consulti <xref linkend=\"d-i-intro\"/>."
 
 #. Tag: title
-#: installation-howto.xml:299
+#: installation-howto.xml:302
 #, no-c-format
 msgid "Send us an installation report"
 msgstr "Invio di un resoconto d'installazione"
 
 #. Tag: para
-#: installation-howto.xml:300
+#: installation-howto.xml:303
 #, no-c-format
 msgid ""
 "If you successfully managed an installation with &d-i;, please take time to "
@@ -594,7 +609,7 @@ msgstr ""
 "il comando <command>reportbug installation-reports</command>."
 
 #. Tag: para
-#: installation-howto.xml:310
+#: installation-howto.xml:313
 #, no-c-format
 msgid ""
 "If you did not complete the install, you probably found a bug in debian-"
@@ -611,13 +626,13 @@ msgstr ""
 "completamente fallita si consulti <xref linkend=\"problem-report\"/>."
 
 #. Tag: title
-#: installation-howto.xml:322
+#: installation-howto.xml:325
 #, no-c-format
 msgid "And finally&hellip;"
 msgstr "E per finire&hellip;"
 
 #. Tag: para
-#: installation-howto.xml:323
+#: installation-howto.xml:326
 #, no-c-format
 msgid ""
 "We hope that your &debian; installation is pleasant and that you find "
diff --git a/po/it/partitioning.po b/po/it/partitioning.po
index f66bb149e..cbf82c986 100644
--- a/po/it/partitioning.po
+++ b/po/it/partitioning.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual_partitioning\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2020-04-02 09:22+0000\n"
+"POT-Creation-Date: 2020-07-26 23:02+0000\n"
 "PO-Revision-Date: 2020-04-18 11:24+0200\n"
 "Last-Translator: Luca Monducci <luca.mo@tiscali.it>\n"
 "Language-Team: Italian <debian-l10n-italian@lists.debian.org>\n"
@@ -930,8 +930,8 @@ msgstr ""
 "il disco con MacOS."
 
 #. Tag: title
-#: partitioning.xml:532 partitioning.xml:556 partitioning.xml:652
-#: partitioning.xml:766 partitioning.xml:843
+#: partitioning.xml:532 partitioning.xml:556 partitioning.xml:653
+#: partitioning.xml:767 partitioning.xml:844
 #, no-c-format
 msgid "Partitioning for &arch-title;"
 msgstr "Partizionare per &arch-title;"
@@ -989,9 +989,18 @@ msgstr ""
 
 #. Tag: para
 #: partitioning.xml:567
-#, no-c-format
-msgid ""
-"The PC BIOS generally adds additional constraints for disk partitioning. "
+#, fuzzy, no-c-format
+#| msgid ""
+#| "The PC BIOS generally adds additional constraints for disk partitioning. "
+#| "There is a limit to how many <quote>primary</quote> and <quote>logical</"
+#| "quote> partitions a drive can contain. Additionally, with pre "
+#| "1994&ndash;98 BIOSes, there are limits to where on the drive the BIOS can "
+#| "boot from. More information can be found in the <ulink url=\"&url-"
+#| "partition-howto;\">Linux Partition HOWTO</ulink>, but this section will "
+#| "include a brief overview to help you plan most situations."
+msgid ""
+"While modern UEFI systems don't have such limitations as listed below, the "
+"old PC BIOS generally adds additional constraints for disk partitioning. "
 "There is a limit to how many <quote>primary</quote> and <quote>logical</"
 "quote> partitions a drive can contain. Additionally, with pre 1994&ndash;98 "
 "BIOSes, there are limits to where on the drive the BIOS can boot from. More "
@@ -1009,7 +1018,7 @@ msgstr ""
 "panoramica utile nella maggior parte delle situazioni."
 
 #. Tag: para
-#: partitioning.xml:577
+#: partitioning.xml:578
 #, no-c-format
 msgid ""
 "<quote>Primary</quote> partitions are the original partitioning scheme for "
@@ -1031,7 +1040,7 @@ msgstr ""
 "disco."
 
 #. Tag: para
-#: partitioning.xml:588
+#: partitioning.xml:589
 #, no-c-format
 msgid ""
 "Linux limits the partitions per drive to 255 partitions for SCSI disks (3 "
@@ -1050,7 +1059,7 @@ msgstr ""
 "partizioni."
 
 #. Tag: para
-#: partitioning.xml:598
+#: partitioning.xml:599
 #, no-c-format
 msgid ""
 "If you have a large IDE disk, and are using neither LBA addressing, nor "
@@ -1066,7 +1075,7 @@ msgstr ""
 "524&nbsp;MB, senza traduzione da parte del BIOS)."
 
 #. Tag: para
-#: partitioning.xml:606
+#: partitioning.xml:607
 #, no-c-format
 msgid ""
 "This restriction doesn't apply if you have a BIOS newer than around "
@@ -1093,7 +1102,7 @@ msgstr ""
 "&arch-kernel; non usa il BIOS per accedere al disco."
 
 #. Tag: para
-#: partitioning.xml:620
+#: partitioning.xml:621
 #, no-c-format
 msgid ""
 "If you have a large disk, you might have to use cylinder translation "
@@ -1116,7 +1125,7 @@ msgstr ""
 "rappresentazione <emphasis>tradotta</emphasis>."
 
 #. Tag: para
-#: partitioning.xml:632
+#: partitioning.xml:633
 #, no-c-format
 msgid ""
 "The recommended way of accomplishing this is to create a small "
@@ -1140,7 +1149,7 @@ msgstr ""
 "estensioni per l'accesso ai dischi grandi."
 
 #. Tag: para
-#: partitioning.xml:653
+#: partitioning.xml:654
 #, no-c-format
 msgid ""
 "The <command>partman</command> disk partitioner is the default partitioning "
@@ -1157,13 +1166,13 @@ msgstr ""
 "command>."
 
 #. Tag: title
-#: partitioning.xml:665
+#: partitioning.xml:666
 #, no-c-format
 msgid "EFI Recognized Formats"
 msgstr "Formati EFI riconosciuti"
 
 #. Tag: para
-#: partitioning.xml:666
+#: partitioning.xml:667
 #, no-c-format
 msgid ""
 "The IA-64 EFI firmware supports two partition table (or disk label) formats, "
@@ -1181,7 +1190,7 @@ msgstr ""
 "quest'ultimo può gestire correttamente sia tabelle GPT che tabelle MS-DOS."
 
 #. Tag: para
-#: partitioning.xml:678
+#: partitioning.xml:679
 #, no-c-format
 msgid ""
 "The automatic partitioning recipes for <command>partman</command> allocate "
@@ -1197,7 +1206,7 @@ msgstr ""
 "utilizzabile anche per creare una partizione di <emphasis>swap</emphasis>."
 
 #. Tag: para
-#: partitioning.xml:686
+#: partitioning.xml:687
 #, no-c-format
 msgid ""
 "The <command>partman</command> partitioner will handle most disk layouts. "
@@ -1249,13 +1258,13 @@ msgstr ""
 "visto che vengono controllati eventuali blocchi danneggiati sulla partizione."
 
 #. Tag: title
-#: partitioning.xml:711
+#: partitioning.xml:712
 #, no-c-format
 msgid "Boot Loader Partition Requirements"
 msgstr "Requisiti per la partizione del boot loader"
 
 #. Tag: para
-#: partitioning.xml:712
+#: partitioning.xml:713
 #, no-c-format
 msgid ""
 "ELILO, the IA-64 boot loader, requires a partition containing a FAT file "
@@ -1272,7 +1281,7 @@ msgstr ""
 "un valore più adeguato può essere 128MB."
 
 #. Tag: para
-#: partitioning.xml:721
+#: partitioning.xml:722
 #, no-c-format
 msgid ""
 "The EFI Boot Manager and the EFI Shell fully support the GPT table so the "
@@ -1300,7 +1309,7 @@ msgstr ""
 "aggiungere una partizione EFI."
 
 #. Tag: para
-#: partitioning.xml:736
+#: partitioning.xml:737
 #, no-c-format
 msgid ""
 "It is strongly recommended that you allocate the EFI boot partition on the "
@@ -1310,13 +1319,13 @@ msgstr ""
 "disco che ospita il file system <emphasis>root</emphasis>."
 
 #. Tag: title
-#: partitioning.xml:744
+#: partitioning.xml:745
 #, no-c-format
 msgid "EFI Diagnostic Partitions"
 msgstr "Partizioni diagnostiche EFI"
 
 #. Tag: para
-#: partitioning.xml:745
+#: partitioning.xml:746
 #, no-c-format
 msgid ""
 "The EFI firmware is significantly more sophisticated than the usual BIOS "
@@ -1338,7 +1347,7 @@ msgstr ""
 "aver creato una partizione di avvio EFI."
 
 #. Tag: para
-#: partitioning.xml:767
+#: partitioning.xml:768
 #, no-c-format
 msgid ""
 "SGI machines require an SGI disk label in order to make the system bootable "
@@ -1356,13 +1365,13 @@ msgstr ""
 "la partizione deve iniziare al settore 0."
 
 #. Tag: title
-#: partitioning.xml:784
+#: partitioning.xml:785
 #, no-c-format
 msgid "Partitioning Newer PowerMacs"
 msgstr "Partizionare i nuovi PowerMac"
 
 #. Tag: para
-#: partitioning.xml:785
+#: partitioning.xml:786
 #, no-c-format
 msgid ""
 "If you are installing onto a NewWorld PowerMac you must create a special "
@@ -1386,7 +1395,7 @@ msgstr ""
 "command> usando il comando <userinput>b</userinput>."
 
 #. Tag: para
-#: partitioning.xml:798
+#: partitioning.xml:799
 #, no-c-format
 msgid ""
 "The special partition type Apple_Bootstrap is required to prevent MacOS from "
@@ -1399,7 +1408,7 @@ msgstr ""
 "automaticamente."
 
 #. Tag: para
-#: partitioning.xml:805
+#: partitioning.xml:806
 #, no-c-format
 msgid ""
 "Note that the bootstrap partition is only meant to hold 3 very small files: "
@@ -1417,7 +1426,7 @@ msgstr ""
 "usano le utilità <command>ybin</command> e <command>mkofboot</command>."
 
 #. Tag: para
-#: partitioning.xml:815
+#: partitioning.xml:816
 #, no-c-format
 msgid ""
 "In order for OpenFirmware to automatically boot &debian-gnu; the bootstrap "
@@ -1441,7 +1450,7 @@ msgstr ""
 "sul disco."
 
 #. Tag: para
-#: partitioning.xml:827
+#: partitioning.xml:828
 #, no-c-format
 msgid ""
 "Apple disks normally have several small driver partitions. If you intend to "
@@ -1458,7 +1467,7 @@ msgstr ""
 "attive né partizioni driver."
 
 #. Tag: para
-#: partitioning.xml:844
+#: partitioning.xml:845
 #, no-c-format
 msgid ""
 "Make sure you create a <quote>Sun disk label</quote> on your boot disk. This "
@@ -1472,7 +1481,7 @@ msgstr ""
 "utilizzato in <command>fdisk</command> per creare disk label Sun."
 
 #. Tag: para
-#: partitioning.xml:852
+#: partitioning.xml:853
 #, no-c-format
 msgid ""
 "Furthermore, on &arch-title; disks, make sure your first partition on your "
@@ -1494,7 +1503,7 @@ msgstr ""
 "la tabella delle partizioni e il blocco di avvio."
 
 #. Tag: para
-#: partitioning.xml:863
+#: partitioning.xml:864
 #, no-c-format
 msgid ""
 "It is also advised that the third partition should be of type <quote>Whole "
diff --git a/po/it/preparing.po b/po/it/preparing.po
index 0f35d2923..cb70af715 100644
--- a/po/it/preparing.po
+++ b/po/it/preparing.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual_preparing\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2020-07-24 23:02+0000\n"
+"POT-Creation-Date: 2020-07-26 23:02+0000\n"
 "PO-Revision-Date: 2019-09-28 16:33+0200\n"
 "Last-Translator: Luca Monducci <luca.mo@tiscali.it>\n"
 "Language-Team: Italian <debian-l10n-italian@lists.debian.org>\n"
@@ -563,14 +563,21 @@ msgstr "Manuali che sono venduti insieme a ciascun componente hardware."
 
 #. Tag: para
 #: preparing.xml:391
-#, no-c-format
-msgid ""
-"The BIOS setup screens of your computer. You can view these screens when you "
-"start your computer by pressing a combination of keys. Check your manual for "
-"the combination. Often, it is the <keycap>Delete</keycap> or the <keycap>F2</"
-"keycap> key, but some manufacturers use other keys or key combinations. "
-"Usually upon starting the computer there will be a message stating which key "
-"to press to enter the setup screen."
+#, fuzzy, no-c-format
+#| msgid ""
+#| "The BIOS setup screens of your computer. You can view these screens when "
+#| "you start your computer by pressing a combination of keys. Check your "
+#| "manual for the combination. Often, it is the <keycap>Delete</keycap> or "
+#| "the <keycap>F2</keycap> key, but some manufacturers use other keys or key "
+#| "combinations. Usually upon starting the computer there will be a message "
+#| "stating which key to press to enter the setup screen."
+msgid ""
+"The BIOS/UEFI setup screens of your computer. You can view these screens "
+"when you start your computer by pressing a combination of keys. Check your "
+"manual for the combination. Often, it is the <keycap>Delete</keycap> or the "
+"<keycap>F2</keycap> key, but some manufacturers use other keys or key "
+"combinations. Usually upon starting the computer there will be a message "
+"stating which key to press to enter the setup screen."
 msgstr ""
 "Menu di configurazione del BIOS del computer. Per accedere a questo menu "
 "premere all'accensione del computer una certa combinazione di tasti, vedere "
@@ -832,12 +839,18 @@ msgstr ""
 
 #. Tag: para
 #: preparing.xml:553
-#, no-c-format
+#, fuzzy, no-c-format
+#| msgid ""
+#| "On Linux systems, these IDs can be read with the <command>lsusb</command> "
+#| "command for USB devices and with the <command>lspci -nn</command> command "
+#| "for PCI/PCI-Express/ExpressCard devices. The vendor and product IDs are "
+#| "usually given in the form of two hexadecimal numbers, seperated by a "
+#| "colon, such as <quote>1d6b:0001</quote>."
 msgid ""
 "On Linux systems, these IDs can be read with the <command>lsusb</command> "
 "command for USB devices and with the <command>lspci -nn</command> command "
 "for PCI/PCI-Express/ExpressCard devices. The vendor and product IDs are "
-"usually given in the form of two hexadecimal numbers, seperated by a colon, "
+"usually given in the form of two hexadecimal numbers, separated by a colon, "
 "such as <quote>1d6b:0001</quote>."
 msgstr ""
 "Sui sistemi Linux, questi ID possono essere trovati con il comando "
@@ -1698,14 +1711,21 @@ msgstr ""
 
 #. Tag: para
 #: preparing.xml:1117
-#, no-c-format
+#, fuzzy, no-c-format
+#| msgid ""
+#| "This section will walk you through pre-installation hardware setup, if "
+#| "any, that you will need to do prior to installing &debian;. Generally, "
+#| "this involves checking and possibly changing BIOS/system firmware "
+#| "settings for your system. The <quote>BIOS</quote> or <quote>system "
+#| "firmware</quote> is the core software used by the hardware; it is most "
+#| "critically invoked during the bootstrap process (after power-up)."
 msgid ""
 "This section will walk you through pre-installation hardware setup, if any, "
 "that you will need to do prior to installing &debian;. Generally, this "
-"involves checking and possibly changing BIOS/system firmware settings for "
-"your system. The <quote>BIOS</quote> or <quote>system firmware</quote> is "
-"the core software used by the hardware; it is most critically invoked during "
-"the bootstrap process (after power-up)."
+"involves checking and possibly changing BIOS/UEFI/system firmware settings "
+"for your system. The <quote>BIOS/UEFI</quote> or <quote>system firmware</"
+"quote> is the core software used by the hardware; it is most critically "
+"invoked during the bootstrap process (after power-up)."
 msgstr ""
 "In alcuni casi, prima di installare &debian;, potrebbe essere necessario "
 "riconfigurare dell'hardware, in questa sezione è descritto cosa fare. "
@@ -1717,22 +1737,32 @@ msgstr ""
 
 #. Tag: title
 #: preparing.xml:1132
-#, no-c-format
-msgid "Invoking the BIOS Set-Up Menu"
+#, fuzzy, no-c-format
+#| msgid "Invoking the BIOS Set-Up Menu"
+msgid "Invoking the BIOS/UEFI Set-Up Menu"
 msgstr "Invocare il menu di configurazione del BIOS"
 
 #. Tag: para
 #: preparing.xml:1134
-#, no-c-format
-msgid ""
-"The BIOS provides the basic functions needed to boot your machine and to "
-"allow your operating system to access your hardware. Your system provides a "
-"BIOS setup menu, which is used to configure the BIOS. To enter the BIOS "
-"setup menu you have to press a key or key combination after turning on the "
-"computer. Often it is the <keycap>Delete</keycap> or the <keycap>F2</keycap> "
-"key, but some manufacturers use other keys. Usually upon starting the "
-"computer there will be a message stating which key to press to enter the "
-"setup screen."
+#, fuzzy, no-c-format
+#| msgid ""
+#| "The BIOS provides the basic functions needed to boot your machine and to "
+#| "allow your operating system to access your hardware. Your system provides "
+#| "a BIOS setup menu, which is used to configure the BIOS. To enter the BIOS "
+#| "setup menu you have to press a key or key combination after turning on "
+#| "the computer. Often it is the <keycap>Delete</keycap> or the <keycap>F2</"
+#| "keycap> key, but some manufacturers use other keys. Usually upon starting "
+#| "the computer there will be a message stating which key to press to enter "
+#| "the setup screen."
+msgid ""
+"The BIOS/UEFI provides the basic functions needed to boot your machine and "
+"to allow your operating system to access your hardware. Your system provides "
+"a BIOS/UEFI setup menu, which is used to configure the BIOS/UEFI. To enter "
+"the BIOS/UEFI setup menu you have to press a key or key combination after "
+"turning on the computer. Often it is the <keycap>Delete</keycap> or the "
+"<keycap>F2</keycap> key, but some manufacturers use other keys. Usually upon "
+"starting the computer there will be a message stating which key to press to "
+"enter the setup screen."
 msgstr ""
 "Il BIOS fornisce le funzioni di base necessarie all'avvio della macchina e "
 "permette al sistema operativo di accedere all'hardware. Il proprio sistema è "
@@ -1751,13 +1781,20 @@ msgstr "Selezione del dispositivo di avvio"
 
 #. Tag: para
 #: preparing.xml:1150
-#, no-c-format
-msgid ""
-"Within the BIOS setup menu, you can select which devices shall be checked in "
-"which sequence for a bootable operating system. Possible choices usually "
-"include the internal harddisks, the CD/DVD-ROM drive and USB mass storage "
-"devices such as USB sticks or external USB harddisks. On modern systems "
-"there is also often a possibility to enable network booting via PXE."
+#, fuzzy, no-c-format
+#| msgid ""
+#| "Within the BIOS setup menu, you can select which devices shall be checked "
+#| "in which sequence for a bootable operating system. Possible choices "
+#| "usually include the internal harddisks, the CD/DVD-ROM drive and USB mass "
+#| "storage devices such as USB sticks or external USB harddisks. On modern "
+#| "systems there is also often a possibility to enable network booting via "
+#| "PXE."
+msgid ""
+"Within the BIOS/UEFI setup menu, you can select which devices shall be "
+"checked in which sequence for a bootable operating system. Possible choices "
+"usually include the internal harddisks, the CD/DVD-ROM drive and USB mass "
+"storage devices such as USB sticks or external USB harddisks. On modern "
+"systems there is also often a possibility to enable network booting via PXE."
 msgstr ""
 "All'interno del menu di configurazione del BIOS è possibile di scegliere da "
 "quali dispositivi e in che sequenza verrà fatto il bootstrap del sistema "
@@ -1780,18 +1817,29 @@ msgstr ""
 
 #. Tag: para
 #: preparing.xml:1164
-#, no-c-format
-msgid ""
-"Most BIOS versions allow you to call up a boot menu on system startup in "
-"which you select from which device the computer should start for the current "
-"session. If this option is available, the BIOS usually displays a short "
-"message like <quote>press <keycap>F12</keycap> for boot menu</quote> on "
-"system startup. The actual key used to select this menu varies from system "
-"to system; commonly used keys are <keycap>F12</keycap>, <keycap>F11</keycap> "
-"and <keycap>F8</keycap>. Choosing a device from this menu does not change "
-"the default boot order of the BIOS, i.e. you can start once from a USB stick "
-"while having configured the internal harddisk as the normal primary boot "
-"device."
+#, fuzzy, no-c-format
+#| msgid ""
+#| "Most BIOS versions allow you to call up a boot menu on system startup in "
+#| "which you select from which device the computer should start for the "
+#| "current session. If this option is available, the BIOS usually displays a "
+#| "short message like <quote>press <keycap>F12</keycap> for boot menu</"
+#| "quote> on system startup. The actual key used to select this menu varies "
+#| "from system to system; commonly used keys are <keycap>F12</keycap>, "
+#| "<keycap>F11</keycap> and <keycap>F8</keycap>. Choosing a device from this "
+#| "menu does not change the default boot order of the BIOS, i.e. you can "
+#| "start once from a USB stick while having configured the internal harddisk "
+#| "as the normal primary boot device."
+msgid ""
+"Most BIOS/UEFI versions allow you to call up a boot menu on system startup "
+"in which you select from which device the computer should start for the "
+"current session. If this option is available, the BIOS/UEFI usually displays "
+"a short message like <quote>press <keycap>F12</keycap> for boot menu</quote> "
+"on system startup. The actual key used to select this menu varies from "
+"system to system; commonly used keys are <keycap>F12</keycap>, <keycap>F11</"
+"keycap> and <keycap>F8</keycap>. Choosing a device from this menu does not "
+"change the default boot order of the BIOS/UEFI, i.e. you can start once from "
+"a USB stick while having configured the internal harddisk as the normal "
+"primary boot device."
 msgstr ""
 "La maggior parte delle versioni di BIOS permettono di richiamare un menu "
 "d'avvio da cui è possibile scegliere il dispositivo da cui il computer deve "
@@ -1806,11 +1854,16 @@ msgstr ""
 
 #. Tag: para
 #: preparing.xml:1178
-#, no-c-format
+#, fuzzy, no-c-format
+#| msgid ""
+#| "If your BIOS does not provide you with a boot menu to do ad-hoc choices "
+#| "of the current boot device, you will have to change your BIOS setup to "
+#| "make the device from which the &d-i; shall be booted the primary boot "
+#| "device."
 msgid ""
-"If your BIOS does not provide you with a boot menu to do ad-hoc choices of "
-"the current boot device, you will have to change your BIOS setup to make the "
-"device from which the &d-i; shall be booted the primary boot device."
+"If your BIOS/UEFI does not provide you with a boot menu to do ad-hoc choices "
+"of the current boot device, you will have to change your BIOS/UEFI setup to "
+"make the device from which the &d-i; shall be booted the primary boot device."
 msgstr ""
 "Se il proprio BIOS non fornisce il menu di avvio per modificare l'attuale "
 "dispositivo di avvio, è necessario cambiare la configurazione del BIOS per "
@@ -1819,21 +1872,35 @@ msgstr ""
 
 #. Tag: para
 #: preparing.xml:1184
-#, no-c-format
-msgid ""
-"Unfortunately some computers contain buggy BIOS versions. Booting &d-i; from "
-"a USB stick might not work even if there is an appropriate option in the "
-"BIOS setup menu and the stick is selected as the primary boot device. On "
-"some of these systems using a USB stick as boot medium is impossible; others "
-"can be tricked into booting from the stick by changing the device type in "
-"the BIOS setup from the default <quote>USB harddisk</quote> or <quote>USB "
-"stick</quote> to <quote>USB ZIP</quote> or <quote>USB CDROM</quote>. <phrase "
-"condition=\"isohybrid-supported\"> In particular if you use an isohybrid "
-"installation image on a USB stick (see <xref linkend=\"usb-copy-isohybrid\"/"
-">), changing the device type to <quote>USB CDROM</quote> helps on some "
-"BIOSes which will not boot from a USB stick in USB harddisk mode.</phrase> "
-"You may need to configure your BIOS to enable <quote>USB legacy support</"
-"quote>."
+#, fuzzy, no-c-format
+#| msgid ""
+#| "Unfortunately some computers contain buggy BIOS versions. Booting &d-i; "
+#| "from a USB stick might not work even if there is an appropriate option in "
+#| "the BIOS setup menu and the stick is selected as the primary boot device. "
+#| "On some of these systems using a USB stick as boot medium is impossible; "
+#| "others can be tricked into booting from the stick by changing the device "
+#| "type in the BIOS setup from the default <quote>USB harddisk</quote> or "
+#| "<quote>USB stick</quote> to <quote>USB ZIP</quote> or <quote>USB CDROM</"
+#| "quote>. <phrase condition=\"isohybrid-supported\"> In particular if you "
+#| "use an isohybrid installation image on a USB stick (see <xref linkend="
+#| "\"usb-copy-isohybrid\"/>), changing the device type to <quote>USB CDROM</"
+#| "quote> helps on some BIOSes which will not boot from a USB stick in USB "
+#| "harddisk mode.</phrase> You may need to configure your BIOS to enable "
+#| "<quote>USB legacy support</quote>."
+msgid ""
+"Unfortunately some computers may contain buggy BIOS/UEFI versions. Booting "
+"&d-i; from a USB stick might not work even if there is an appropriate option "
+"in the BIOS/UEFI setup menu and the stick is selected as the primary boot "
+"device. On some of these systems using a USB stick as boot medium is "
+"impossible; others can be tricked into booting from the stick by changing "
+"the device type in the BIOS/UEFI setup from the default <quote>USB harddisk</"
+"quote> or <quote>USB stick</quote> to <quote>USB ZIP</quote> or <quote>USB "
+"CDROM</quote>. <phrase condition=\"isohybrid-supported\"> In particular if "
+"you use an isohybrid installation image on a USB stick (see <xref linkend="
+"\"usb-copy-isohybrid\"/>), changing the device type to <quote>USB CDROM</"
+"quote> helps on some BIOSes which will not boot from a USB stick in USB "
+"harddisk mode.</phrase> You may need to configure your BIOS/UEFI to enable "
+"<quote>USB legacy support</quote>."
 msgstr ""
 "Sfortunatamente alcuni computer contengono dei BIOS con problemi. L'avvio di "
 "&d-i; da una chiavetta USB potrebbe non funzionare anche quando esiste "
@@ -1852,9 +1919,15 @@ msgstr ""
 
 #. Tag: para
 #: preparing.xml:1200
-#, no-c-format
+#, fuzzy, no-c-format
+#| msgid ""
+#| "If you cannot manipulate the BIOS to boot directly from a USB stick you "
+#| "still have the option of using an ISO copied to the stick. Boot &d-i; "
+#| "using <xref linkend=\"boot-drive-files\"/> and, after scanning the hard "
+#| "drives for an installer ISO image, select the USB device and choose an "
+#| "installation image."
 msgid ""
-"If you cannot manipulate the BIOS to boot directly from a USB stick you "
+"If you cannot manipulate the BIOS/UEFI to boot directly from a USB stick you "
 "still have the option of using an ISO copied to the stick. Boot &d-i; using "
 "<xref linkend=\"boot-drive-files\"/> and, after scanning the hard drives for "
 "an installer ISO image, select the USB device and choose an installation "
@@ -2957,7 +3030,21 @@ msgstr ""
 
 #. Tag: para
 #: preparing.xml:1837
-#, no-c-format
+#, fuzzy, no-c-format
+#| msgid ""
+#| "The latter becomes important when booting &d-i; on a UEFI system with CSM "
+#| "because &d-i; checks whether it was started on a BIOS- or on a native "
+#| "UEFI system and installs the corresponding bootloader. Normally this "
+#| "simply works but there can be a problem in multi-boot environments. On "
+#| "some UEFI systems with CSM the default boot mode for removable devices "
+#| "can be different from what is actually used when booting from hard disk, "
+#| "so when booting the installer from a USB stick in a different mode from "
+#| "what is used when booting another already installed operating system from "
+#| "the hard disk, the wrong bootloader might be installed and the system "
+#| "might be unbootable after finishing the installation. When choosing the "
+#| "boot device from a firmware boot menu, some systems offer two seperate "
+#| "choices for each device, so that the user can select whether booting "
+#| "shall happen in CSM or in native UEFI mode."
 msgid ""
 "The latter becomes important when booting &d-i; on a UEFI system with CSM "
 "because &d-i; checks whether it was started on a BIOS- or on a native UEFI "
@@ -2969,7 +3056,7 @@ msgid ""
 "booting another already installed operating system from the hard disk, the "
 "wrong bootloader might be installed and the system might be unbootable after "
 "finishing the installation. When choosing the boot device from a firmware "
-"boot menu, some systems offer two seperate choices for each device, so that "
+"boot menu, some systems offer two separate choices for each device, so that "
 "the user can select whether booting shall happen in CSM or in native UEFI "
 "mode."
 msgstr ""