[SILENT_COMMIT] Update of POT and PO files for the installation-guide

1 files changed, 423 insertions, 223 deletions

diff --git a/po/it/install-methods.po b/po/it/install-methods.po
index aa220f155..22e318b4e 100644
--- a/po/it/install-methods.po
+++ b/po/it/install-methods.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual_install-methods\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2020-12-02 23:02+0000\n"
+"POT-Creation-Date: 2021-10-27 23:02+0000\n"
 "PO-Revision-Date: 2021-01-16 15:52+0100\n"
 "Last-Translator: Luca Monducci <luca.mo@tiscali.it>\n"
 "Language-Team: Italian <debian-l10n-italian@lists.debian.org>\n"
@@ -341,7 +341,18 @@ msgstr "Preparazione dei file per l'avvio da chiavetta USB"
 
 #. Tag: para
 #: install-methods.xml:240
-#, no-c-format
+#, fuzzy, no-c-format
+#| msgid ""
+#| "To prepare the USB stick, we recommend to use a system where GNU/Linux is "
+#| "already running and where USB is supported. With current GNU/Linux "
+#| "systems the USB stick should be automatically recognized when you insert "
+#| "it. If it is not you should check that the usb-storage kernel module is "
+#| "loaded. When the USB stick is inserted, it will be mapped to a device "
+#| "named <filename>/dev/sdX</filename>, where the <quote>X</quote> is a "
+#| "letter in the range a-z. You should be able to see to which device the "
+#| "USB stick was mapped by running the command <command>dmesg</command> "
+#| "after inserting it. To write to your stick, you may have to turn off its "
+#| "write protection switch."
 msgid ""
 "To prepare the USB stick, we recommend to use a system where GNU/Linux is "
 "already running and where USB is supported. With current GNU/Linux systems "
@@ -350,8 +361,10 @@ msgid ""
 "the USB stick is inserted, it will be mapped to a device named <filename>/"
 "dev/sdX</filename>, where the <quote>X</quote> is a letter in the range a-z. "
 "You should be able to see to which device the USB stick was mapped by "
-"running the command <command>dmesg</command> after inserting it. To write to "
-"your stick, you may have to turn off its write protection switch."
+"running the command <command>lsblk</command> before and after inserting it. "
+"(The output of <command>dmesg</command> (as root) is another possible method "
+"for that.) To write to your stick, you may have to turn off its write "
+"protection switch."
 msgstr ""
 "Per preparare la chiavetta USB, si raccomanda di utilizzare un sistema GNU/"
 "Linux con supporto USB già funzionante. Con gli attuali sistemi GNU/Linux la "
@@ -365,13 +378,18 @@ msgstr ""
 "disattivare la protezione dalla scrittura."
 
 #. Tag: para
-#: install-methods.xml:253
-#, no-c-format
+#: install-methods.xml:255
+#, fuzzy, no-c-format
+#| msgid ""
+#| "The procedures described in this section will destroy anything already on "
+#| "the device! Make very sure that you use the correct device name for your "
+#| "USB stick. If you use the wrong device the result could be that all "
+#| "information on for example a hard disk could be lost."
 msgid ""
 "The procedures described in this section will destroy anything already on "
 "the device! Make very sure that you use the correct device name for your USB "
 "stick. If you use the wrong device the result could be that all information "
-"on for example a hard disk could be lost."
+"on, for example, a hard disk is lost."
 msgstr ""
 "La procedura descritta in questa sezione distrugge qualunque cosa sia "
 "presente sul device, fare attenzione a usare il nome corretto per il device "
@@ -379,19 +397,27 @@ msgstr ""
 "esempio, di perdere tutte le informazioni su un disco fisso."
 
 #. Tag: title
-#: install-methods.xml:263
+#: install-methods.xml:265
 #, no-c-format
 msgid "Preparing a USB stick using a hybrid CD/DVD image"
 msgstr "Preparazione di una chiavetta USB con un'immagine CD/DVD ibrida"
 
 #. Tag: para
-#: install-methods.xml:264
-#, no-c-format
+#: install-methods.xml:266
+#, fuzzy, no-c-format
+#| msgid ""
+#| "Debian installation images can now be written directly to a USB stick, "
+#| "which is a very easy way to make a bootable USB stick. Simply choose an "
+#| "image (such as the netinst, CD, DVD-1, or netboot) that will fit on your "
+#| "USB stick. See <xref linkend=\"official-cdrom\"/> to get an installation "
+#| "image."
 msgid ""
-"Debian installation images can now be written directly to a USB stick, which "
-"is a very easy way to make a bootable USB stick. Simply choose an image "
-"(such as the netinst, CD, DVD-1, or netboot) that will fit on your USB "
-"stick. See <xref linkend=\"official-cdrom\"/> to get an installation image."
+"Debian installation images for this architecture are created using the "
+"<command>isohybrid</command> technology; that means they can be written "
+"directly to a USB stick, which is a very easy way to make an installation "
+"media. Simply choose an image (such as the netinst, CD or DVD-1) that will "
+"fit on your USB stick. See <xref linkend=\"official-cdrom\"/> to get an "
+"installation image."
 msgstr ""
 "Adesso è possibile scrivere le immagini per l'installazione Debian "
 "direttamente sulla chiavetta USB, questo è un metodo estremamente semplice "
@@ -401,7 +427,7 @@ msgstr ""
 "\"official-cdrom\"/> per procurarsi l'immagine di un CD o DVD."
 
 #. Tag: para
-#: install-methods.xml:272
+#: install-methods.xml:276
 #, no-c-format
 msgid ""
 "Alternatively, for very small USB sticks, only a few megabytes in size, you "
@@ -415,7 +441,7 @@ msgstr ""
 "linkend=\"where-files\"/>)."
 
 #. Tag: para
-#: install-methods.xml:279
+#: install-methods.xml:283
 #, no-c-format
 msgid ""
 "The installation image you choose should be written directly to the USB "
@@ -443,7 +469,7 @@ msgstr ""
 "cd-faq-write-usb;\">FAQ di Debian CD</ulink>."
 
 #. Tag: para
-#: install-methods.xml:291
+#: install-methods.xml:295
 #, no-c-format
 msgid ""
 "The image must be written to the whole-disk device and not a partition, e."
@@ -455,7 +481,7 @@ msgstr ""
 "<command>unetbootin</command> poiché modificano l'immagine."
 
 #. Tag: para
-#: install-methods.xml:297
+#: install-methods.xml:301
 #, no-c-format
 msgid ""
 "Simply writing the installation image to USB like this should work fine for "
@@ -468,7 +494,7 @@ msgstr ""
 "a chi ha necessità particolari."
 
 #. Tag: para
-#: install-methods.xml:305
+#: install-methods.xml:309
 #, no-c-format
 msgid ""
 "The hybrid image on the stick does not occupy all the storage space, so it "
@@ -483,39 +509,37 @@ msgstr ""
 "che serve in un solo dispositivo."
 
 #. Tag: para
-#: install-methods.xml:313
+#: install-methods.xml:317
 #, no-c-format
 msgid ""
-"Create a second, FAT partition on the stick, mount the partition and copy or "
-"unpack the firmware onto it. For example:"
-msgstr ""
-"Creare sulla chiavetta una seconda partizione FAT, montare la partizione e "
-"copiare o spacchettare il firmware al suo interno. Per esempio:"
-
-#. Tag: screen
-#: install-methods.xml:318
-#, no-c-format
-msgid ""
-"# mount /dev/<replaceable>sdX2</replaceable> /mnt\n"
+"To do so, use cfdisk or any other partitioning tool to create an additional "
+"partition on the stick. Then create a (FAT) filesystem on the partition, "
+"mount it and copy or unpack the firmware onto it, for example with: "
+"<informalexample><screen>\n"
+"# mkdosfs -n FIRMWARE /dev/sdX3\n"
+"# mount /dev/<replaceable>sdX3</replaceable> /mnt\n"
 "# cd /mnt\n"
 "# tar zxvf <replaceable>/path/to/</replaceable>firmware.tar.gz\n"
 "# cd /\n"
-"# umount /mnt"
+"# umount /mnt\n"
+"</screen></informalexample> Take care that you use the correct device name "
+"for your USB stick. The <command>mkdosfs</command> command is contained in "
+"the <classname>dosfstools</classname> &debian; package."
 msgstr ""
-"# mount /dev/<replaceable>sdX2</replaceable> /mnt\n"
-"# cd /mnt\n"
-"# tar zxvf <replaceable>/percorso/di/</replaceable>firmware.tar.gz\n"
-"# cd /\n"
-"# umount /mnt"
 
 #. Tag: para
-#: install-methods.xml:320
-#, no-c-format
+#: install-methods.xml:329
+#, fuzzy, no-c-format
+#| msgid ""
+#| "You might have written the <filename>mini.iso</filename> to the USB "
+#| "stick. In this case the second partition doesn't have to be created as, "
+#| "very nicely, it will already be present. Unplugging and replugging the "
+#| "USB stick should make the two partitions visible."
 msgid ""
-"You might have written the <filename>mini.iso</filename> to the USB stick. "
-"In this case the second partition doesn't have to be created as, very "
-"nicely, it will already be present. Unplugging and replugging the USB stick "
-"should make the two partitions visible."
+"If you have chosen the <filename>mini.iso</filename> to be written to the "
+"USB stick, the second partition doesn't have to be created, as - very nicely "
+"- it will already be present. Unplugging and replugging the USB stick should "
+"make the two partitions visible."
 msgstr ""
 "Se fosse stato necessario scrivere <filename>mini.iso</filename> sulla "
 "chiavetta USB, la seconda partizione non deve essere creata perché, molto "
@@ -523,19 +547,36 @@ msgstr ""
 "per rendere visibili le due partizioni."
 
 #. Tag: title
-#: install-methods.xml:334
+#: install-methods.xml:343
 #, no-c-format
 msgid "Manually copying files to the USB stick"
 msgstr "Copia manuale dei file sulla chiavetta USB"
 
 #. Tag: para
-#: install-methods.xml:335
+#: install-methods.xml:344
 #, no-c-format
 msgid ""
-"An alternative way to set up your USB stick is to manually copy the "
-"installer files, and also an installation image to it. Note that the USB "
-"stick should be at least 1 GB in size (smaller setups are possible if you "
-"follow <xref linkend=\"usb-copy-flexible\"/>)."
+"Prior to isohybrid technology being used for &debian; installation images, "
+"the methods documented in the chapters below were used to prepare media for "
+"booting from USB devices. These have been superseded by the technique in "
+"<xref linkend=\"usb-copy-isohybrid\"/>, but have been left here for "
+"educational and historical purposes and in case they are useful to some user."
+msgstr ""
+
+#. Tag: para
+#: install-methods.xml:353
+#, fuzzy, no-c-format
+#| msgid ""
+#| "An alternative way to set up your USB stick is to manually copy the "
+#| "installer files, and also an installation image to it. Note that the USB "
+#| "stick should be at least 1 GB in size (smaller setups are possible if you "
+#| "follow <xref linkend=\"usb-copy-flexible\"/>)."
+msgid ""
+"An alternative to the method described in <xref linkend=\"usb-copy-isohybrid"
+"\"/> is to manually copy the installer files, and also an installation image "
+"to the stick. Note that the USB stick should be at least 1 GB in size "
+"(smaller setups are possible using the files from netboot, following <xref "
+"linkend=\"usb-copy-flexible\"/>)."
 msgstr ""
 "Un metodo alternativo per preparare la chiavetta USB è copiare manualmente i "
 "file dell'installatore e l'immagine per l'installazione sulla chiavetta. "
@@ -544,13 +585,19 @@ msgstr ""
 "flexible\"/>)."
 
 #. Tag: para
-#: install-methods.xml:342
-#, no-c-format
+#: install-methods.xml:362
+#, fuzzy, no-c-format
+#| msgid ""
+#| "There is an all-in-one file &hdmedia-boot-img; which contains all the "
+#| "installer files (including the kernel) <phrase arch=\"x86\">as well as "
+#| "<classname>syslinux</classname> and its configuration file</phrase> "
+#| "<phrase arch=\"powerpc\">as well as <classname>yaboot</classname> and its "
+#| "configuration file</phrase>."
 msgid ""
 "There is an all-in-one file &hdmedia-boot-img; which contains all the "
-"installer files (including the kernel) <phrase arch=\"x86\">as well as "
-"<classname>syslinux</classname> and its configuration file</phrase> <phrase "
-"arch=\"powerpc\">as well as <classname>yaboot</classname> and its "
+"installer files (including the kernel)<phrase arch=\"x86\"> as well as "
+"<classname>syslinux</classname> and its configuration file</phrase><phrase "
+"arch=\"powerpc\"> as well as <classname>yaboot</classname> and its "
 "configuration file</phrase>."
 msgstr ""
 "C'è un file all-in-one &hdmedia-boot-img; che contiene non solo tutti i file "
@@ -560,7 +607,7 @@ msgstr ""
 "file di configurazione.</phrase>"
 
 #. Tag: para
-#: install-methods.xml:351
+#: install-methods.xml:371
 #, no-c-format
 msgid ""
 "Note that, although convenient, this method does have one major "
@@ -576,21 +623,22 @@ msgstr ""
 "nuovi filesystem."
 
 #. Tag: para
-#: install-methods.xml:359
-#, no-c-format
-msgid "To use this image simply extract it directly to your USB stick:"
+#: install-methods.xml:379
+#, fuzzy, no-c-format
+#| msgid "To use this image simply extract it directly to your USB stick:"
+msgid "Simply extract this image directly to your USB stick:"
 msgstr ""
 "Per utilizzare questa immagine è sufficiente estrarla direttamente sulla "
 "chiavetta USB:"
 
 #. Tag: screen
-#: install-methods.xml:363
+#: install-methods.xml:383
 #, no-c-format
 msgid "# zcat boot.img.gz &gt; /dev/<replaceable>sdX</replaceable>"
 msgstr "# zcat boot.img.gz &gt; /dev/<replaceable>sdX</replaceable>"
 
 #. Tag: para
-#: install-methods.xml:365
+#: install-methods.xml:385
 #, no-c-format
 msgid ""
 "Create a partition of type \"Apple_Bootstrap\" on your USB stick using "
@@ -602,14 +650,23 @@ msgstr ""
 "command> ed estrarre l'immagine direttamente sulla chiavetta USB:"
 
 #. Tag: screen
-#: install-methods.xml:371
+#: install-methods.xml:391
 #, no-c-format
 msgid "# zcat boot.img.gz &gt; /dev/<replaceable>sdX2</replaceable>"
 msgstr "# zcat boot.img.gz &gt; /dev/<replaceable>sdX2</replaceable>"
 
 #. Tag: para
-#: install-methods.xml:373
-#, no-c-format
+#: install-methods.xml:393
+#, fuzzy, no-c-format
+#| msgid ""
+#| "After that, mount the USB memory stick <phrase arch="
+#| "\"x86\">(<userinput>mount /dev/<replaceable>sdX</replaceable> /mnt</"
+#| "userinput>),</phrase> <phrase arch=\"powerpc\">(<userinput>mount /dev/"
+#| "<replaceable>sdX2</replaceable> /mnt</userinput>),</phrase> which will "
+#| "now have <phrase arch=\"x86\">a FAT filesystem</phrase> <phrase arch="
+#| "\"powerpc\">an HFS filesystem</phrase> on it, and copy a &debian; ISO "
+#| "image (netinst or full CD/DVD) to it. Unmount the stick "
+#| "(<userinput>umount /mnt</userinput>) and you are done."
 msgid ""
 "After that, mount the USB memory stick <phrase arch="
 "\"x86\">(<userinput>mount /dev/<replaceable>sdX</replaceable> /mnt</"
@@ -617,8 +674,8 @@ msgid ""
 "<replaceable>sdX2</replaceable> /mnt</userinput>),</phrase> which will now "
 "have <phrase arch=\"x86\">a FAT filesystem</phrase> <phrase arch=\"powerpc"
 "\">an HFS filesystem</phrase> on it, and copy a &debian; ISO image (netinst "
-"or full CD/DVD) to it. Unmount the stick (<userinput>umount /mnt</"
-"userinput>) and you are done."
+"or full CD; see <xref linkend=\"official-cdrom\"/>) to it. Unmount the stick "
+"(<userinput>umount /mnt</userinput>) and you are done."
 msgstr ""
 "Poi montare la chiavetta USB <phrase arch=\"x86\">(<userinput>mount /dev/"
 "<replaceable>sdX</replaceable> /mnt</userinput>),</phrase> <phrase arch="
@@ -629,13 +686,13 @@ msgstr ""
 "la chiavetta (<userinput>umount /mnt</userinput>)."
 
 #. Tag: title
-#: install-methods.xml:390
+#: install-methods.xml:411
 #, no-c-format
 msgid "Manually copying files to the USB stick &mdash; the flexible way"
 msgstr "Copia manuale dei file sulla chiavetta USB &mdash; il modo flessibile"
 
 #. Tag: para
-#: install-methods.xml:391
+#: install-methods.xml:412
 #, no-c-format
 msgid ""
 "If you like more flexibility or just want to know what's going on, you "
@@ -651,13 +708,13 @@ msgstr ""
 "persino quella di un DVD."
 
 #. Tag: title
-#: install-methods.xml:406 install-methods.xml:528
+#: install-methods.xml:427
 #, no-c-format
-msgid "Partitioning the USB stick"
-msgstr "Partizionamento della chiavetta USB"
+msgid "Partitioning and adding a boot loader"
+msgstr ""
 
 #. Tag: para
-#: install-methods.xml:407
+#: install-methods.xml:428
 #, no-c-format
 msgid ""
 "We will show how to set up the memory stick to use the first partition, "
@@ -667,19 +724,60 @@ msgstr ""
 "partizione anziché l'intero dispositivo."
 
 #. Tag: para
-#: install-methods.xml:412
+#: install-methods.xml:433
 #, no-c-format
 msgid ""
+"In order to start the kernel after booting from the USB stick, we will put a "
+"boot loader on the stick. Although any boot loader should work, it's "
+"convenient to use <classname>syslinux</classname>, since it uses a FAT16 "
+"partition and can be reconfigured by just editing a text file. Any operating "
+"system which supports the FAT file system can be used to make changes to the "
+"configuration of the boot loader."
+msgstr ""
+"Per far partire il kernel dopo aver avviato da un chiavetta USB è necessario "
+"mettere un bootloader sulla chiavetta. Nonostante il fatto che qualsiasi "
+"bootloader dovrebbe funzionare è più comodo usare <classname>syslinux</"
+"classname> dato che utilizza una partizione FAT16 e può essere riconfigurato "
+"semplicemente modificando un file di testo. Qualsiasi sistema operativo con "
+"supporto per il filesystem FAT può essere usato per fare delle modifiche "
+"alla configurazione del bootloader."
+
+#. Tag: para
+#: install-methods.xml:443
+#, no-c-format
+msgid ""
+"First, you need to install the <classname>syslinux</classname> and "
+"<classname>mtools</classname> packages on your system."
+msgstr ""
+
+#. Tag: para
+#: install-methods.xml:448
+#, fuzzy, no-c-format
+#| msgid ""
+#| "Since most USB sticks come pre-configured with a single FAT16 partition, "
+#| "you probably won't have to repartition or reformat the stick. If you have "
+#| "to do that anyway, use <command>cfdisk</command> or any other "
+#| "partitioning tool to create a FAT16 partition<footnote> <para> Don't "
+#| "forget to set the <quote>bootable</quote> bootable flag. </para> </"
+#| "footnote>, install an MBR using: <informalexample><screen>\n"
+#| "# install-mbr /dev/<replaceable>sdX</replaceable>\n"
+#| "</screen></informalexample> The <command>install-mbr</command> command is "
+#| "contained in the <classname>mbr</classname> &debian; package. Then create "
+#| "the filesystem using: <informalexample><screen>\n"
+#| "# mkdosfs /dev/<replaceable>sdX1</replaceable>\n"
+#| "</screen></informalexample> Take care that you use the correct device "
+#| "name for your USB stick. The <command>mkdosfs</command> command is "
+#| "contained in the <classname>dosfstools</classname> &debian; package."
+msgid ""
 "Since most USB sticks come pre-configured with a single FAT16 partition, you "
 "probably won't have to repartition or reformat the stick. If you have to do "
 "that anyway, use <command>cfdisk</command> or any other partitioning tool to "
-"create a FAT16 partition<footnote> <para> Don't forget to set the "
-"<quote>bootable</quote> bootable flag. </para> </footnote>, install an MBR "
+"create a FAT16 partition now<footnote> <para> Don't forget to activate the "
+"<quote>bootable</quote> flag. </para> </footnote>, and then install an MBR "
 "using: <informalexample><screen>\n"
-"# install-mbr /dev/<replaceable>sdX</replaceable>\n"
-"</screen></informalexample> The <command>install-mbr</command> command is "
-"contained in the <classname>mbr</classname> &debian; package. Then create "
-"the filesystem using: <informalexample><screen>\n"
+"# cat /usr/lib/syslinux/mbr/mbr.bin >/dev/<replaceable>sdX</replaceable>\n"
+"</screen></informalexample> Now create the filesystem using: "
+"<informalexample><screen>\n"
 "# mkdosfs /dev/<replaceable>sdX1</replaceable>\n"
 "</screen></informalexample> Take care that you use the correct device name "
 "for your USB stick. The <command>mkdosfs</command> command is contained in "
@@ -702,31 +800,22 @@ msgstr ""
 "pacchetto &debian; <classname>dosfstools</classname>."
 
 #. Tag: para
-#: install-methods.xml:436
-#, no-c-format
-msgid ""
-"In order to start the kernel after booting from the USB stick, we will put a "
-"boot loader on the stick. Although any boot loader should work, it's "
-"convenient to use <classname>syslinux</classname>, since it uses a FAT16 "
-"partition and can be reconfigured by just editing a text file. Any operating "
-"system which supports the FAT file system can be used to make changes to the "
-"configuration of the boot loader."
-msgstr ""
-"Per far partire il kernel dopo aver avviato da un chiavetta USB è necessario "
-"mettere un bootloader sulla chiavetta. Nonostante il fatto che qualsiasi "
-"bootloader dovrebbe funzionare è più comodo usare <classname>syslinux</"
-"classname> dato che utilizza una partizione FAT16 e può essere riconfigurato "
-"semplicemente modificando un file di testo. Qualsiasi sistema operativo con "
-"supporto per il filesystem FAT può essere usato per fare delle modifiche "
-"alla configurazione del bootloader."
-
-#. Tag: para
-#: install-methods.xml:446
-#, no-c-format
-msgid ""
-"To put <classname>syslinux</classname> on the FAT16 partition on your USB "
-"stick, install the <classname>syslinux</classname> and <classname>mtools</"
-"classname> packages on your system, and do: <informalexample><screen>\n"
+#: install-methods.xml:471
+#, fuzzy, no-c-format
+#| msgid ""
+#| "To put <classname>syslinux</classname> on the FAT16 partition on your USB "
+#| "stick, install the <classname>syslinux</classname> and <classname>mtools</"
+#| "classname> packages on your system, and do: <informalexample><screen>\n"
+#| "# syslinux /dev/<replaceable>sdX1</replaceable>\n"
+#| "</screen></informalexample> Again, take care that you use the correct "
+#| "device name. The partition must not be mounted when starting "
+#| "<command>syslinux</command>. This procedure writes a boot sector to the "
+#| "partition and creates the file <filename>ldlinux.sys</filename> which "
+#| "contains the boot loader code."
+msgid ""
+"Having a correctly partitioned USB stick (now), you need to put "
+"<classname>syslinux</classname> on the FAT16 partition with: "
+"<informalexample><screen>\n"
 "# syslinux /dev/<replaceable>sdX1</replaceable>\n"
 "</screen></informalexample> Again, take care that you use the correct device "
 "name. The partition must not be mounted when starting <command>syslinux</"
@@ -745,25 +834,47 @@ msgstr ""
 "codice del bootloader."
 
 #. Tag: title
-#: install-methods.xml:463 install-methods.xml:575
-#, no-c-format
-msgid "Adding the installer image"
+#: install-methods.xml:487
+#, fuzzy, no-c-format
+#| msgid "Adding the installer image"
+msgid "Adding the installer files"
 msgstr "Aggiunta dell'immagine dell'installatore"
 
 #. Tag: para
-#: install-methods.xml:464
+#: install-methods.xml:488
 #, no-c-format
 msgid ""
-"Mount the partition (<userinput>mount /dev/<replaceable>sdX1</replaceable> /"
-"mnt</userinput>) and copy the following installer image files to the stick: "
-"<itemizedlist> <listitem><para> <filename>vmlinuz</filename> or "
-"<filename>linux</filename> (kernel binary) </para></listitem> "
-"<listitem><para> <filename>initrd.gz</filename> (initial ramdisk image) </"
-"para></listitem> </itemizedlist> You can choose between either the text-"
-"based or the graphical version of the installer. The latter can be found in "
-"the <filename>gtk</filename> subdirectory. If you want to rename the files, "
-"please note that <classname>syslinux</classname> can only process DOS (8.3) "
-"file names."
+"There are two different installation variants to choose here: The hd-media "
+"variant needs an installation ISO file on the stick, to load installer "
+"modules and the base system from. The netboot installer however will load "
+"all that from a &debian; mirror."
+msgstr ""
+
+#. Tag: para
+#: install-methods.xml:495
+#, fuzzy, no-c-format
+#| msgid ""
+#| "Mount the partition (<userinput>mount /dev/<replaceable>sdX1</"
+#| "replaceable> /mnt</userinput>) and copy the following installer image "
+#| "files to the stick: <itemizedlist> <listitem><para> <filename>vmlinuz</"
+#| "filename> or <filename>linux</filename> (kernel binary) </para></"
+#| "listitem> <listitem><para> <filename>initrd.gz</filename> (initial "
+#| "ramdisk image) </para></listitem> </itemizedlist> You can choose between "
+#| "either the text-based or the graphical version of the installer. The "
+#| "latter can be found in the <filename>gtk</filename> subdirectory. If you "
+#| "want to rename the files, please note that <classname>syslinux</"
+#| "classname> can only process DOS (8.3) file names."
+msgid ""
+"According to your choice, you have to download some installer files from the "
+"hd-media or netboot subdirectory of <ulink url=\"&url-debian-installer;images"
+"\">debian/dists/&releasename;/main/installer-&architecture;/current/images/</"
+"ulink> on any &debian; mirror: <itemizedlist> <listitem><para> "
+"<filename>vmlinuz</filename> or <filename>linux</filename> (kernel binary) </"
+"para></listitem> <listitem><para> <filename>initrd.gz</filename> (initial "
+"ramdisk image) </para></listitem> </itemizedlist> You can choose between "
+"either the text-based version of the installer (the files can be found "
+"directly in hd-media or netboot) or the graphical version (look in the "
+"respective <filename>gtk</filename> subdirectories)."
 msgstr ""
 "Montare la partizione (<userinput>mount /dev/<replaceable>sdX1</"
 "replaceable> /mnt</userinput>) e copiare i seguenti file con l'immagine "
@@ -777,17 +888,43 @@ msgstr ""
 "gestire solo nomi di file in formato DOS (8.3)."
 
 #. Tag: para
-#: install-methods.xml:488
-#, no-c-format
+#: install-methods.xml:519
+#, fuzzy, no-c-format
+#| msgid ""
+#| "Mount the partition (<userinput>mount /dev/<replaceable>sdX2</"
+#| "replaceable> /mnt</userinput>) and copy the following installer image "
+#| "files to the stick:"
 msgid ""
-"Next you should create a <filename>syslinux.cfg</filename> configuration "
-"file, which at a bare minimum should contain the following line (change the "
-"name of the kernel binary to <quote><filename>linux</filename></quote> if "
-"you used a <filename>netboot</filename> image): <informalexample><screen>\n"
+"Then mount the partition (<userinput>mount /dev/<replaceable>sdX1</"
+"replaceable> /mnt</userinput>) and copy the downloaded files to the root "
+"directory of the stick."
+msgstr ""
+"Montare la partizione (<userinput>mount /dev/<replaceable>sdX2</"
+"replaceable> /mnt</userinput>) e copiare i seguenti file dall'archivio "
+"Debian sulla chiavetta:"
+
+#. Tag: para
+#: install-methods.xml:525
+#, fuzzy, no-c-format
+#| msgid ""
+#| "Next you should create a <filename>syslinux.cfg</filename> configuration "
+#| "file, which at a bare minimum should contain the following line (change "
+#| "the name of the kernel binary to <quote><filename>linux</filename></"
+#| "quote> if you used a <filename>netboot</filename> image): "
+#| "<informalexample><screen>\n"
+#| "default vmlinuz initrd=initrd.gz\n"
+#| "</screen></informalexample> For the graphical installer you should add "
+#| "<userinput>vga=788</userinput> to the line. Other parameters can be "
+#| "appended as desired."
+msgid ""
+"Next you should create a text file named <filename>syslinux.cfg</filename> "
+"in the root directory of the stick as configuration file for syslinux, which "
+"at a bare minimum should contain the following line: "
+"<informalexample><screen>\n"
 "default vmlinuz initrd=initrd.gz\n"
-"</screen></informalexample> For the graphical installer you should add "
-"<userinput>vga=788</userinput> to the line. Other parameters can be appended "
-"as desired."
+"</screen></informalexample> Change the name of the kernel binary to "
+"<quote><filename>linux</filename></quote> if you used files from "
+"<filename>netboot</filename>."
 msgstr ""
 "Poi è necessario creare il file di configurazione <filename>syslinux.cfg</"
 "filename>, deve contenere almeno la riga seguente (modificare il nome del "
@@ -799,7 +936,16 @@ msgstr ""
 "aggiungere anche altri parametri."
 
 #. Tag: para
-#: install-methods.xml:500
+#: install-methods.xml:536
+#, no-c-format
+msgid ""
+"For the graphical installer (from <filename>gtk</filename>) you should add "
+"<userinput>vga=788</userinput> at the end of the line. Other parameters can "
+"be appended as desired."
+msgstr ""
+
+#. Tag: para
+#: install-methods.xml:542
 #, no-c-format
 msgid ""
 "To enable the boot prompt to permit further parameter appending, add a "
@@ -809,16 +955,30 @@ msgstr ""
 "parametri aggiungere una riga con <userinput>prompt 1</userinput>."
 
 #. Tag: para
-#: install-methods.xml:505
+#: install-methods.xml:547
 #, no-c-format
 msgid ""
-"If you used an <filename>hd-media</filename> image, you should now copy the "
-"ISO file of a &debian; ISO image<footnote> <para> You can use either a "
-"netinst or a full CD/DVD image (see <xref linkend=\"official-cdrom\"/>). Be "
-"sure to select one that fits. Note that the <quote>netboot <filename>mini."
-"iso</filename></quote> image is not usable for this purpose. </para> </"
-"footnote> onto the stick. When you are done, unmount the USB memory stick "
-"(<userinput>umount /mnt</userinput>)."
+"If you used files from <filename>hd-media</filename>, you should now copy "
+"the ISO file of a &debian; installation image onto the stick. (For the "
+"<filename>netboot</filename> variant this is not needed.)"
+msgstr ""
+
+#. Tag: para
+#: install-methods.xml:553
+#, fuzzy, no-c-format
+#| msgid ""
+#| "If you used an <filename>hd-media</filename> image, you should now copy "
+#| "the ISO file of a &debian; ISO image<footnote> <para> You can use either "
+#| "a netinst or a full CD/DVD image (see <xref linkend=\"official-cdrom\"/"
+#| ">). Be sure to select one that fits. Note that the <quote>netboot "
+#| "<filename>mini.iso</filename></quote> image is not usable for this "
+#| "purpose. </para> </footnote> onto the stick. When you are done, unmount "
+#| "the USB memory stick (<userinput>umount /mnt</userinput>)."
+msgid ""
+"You can use either a netinst or a full CD/DVD image (see <xref linkend="
+"\"official-cdrom\"/>). Be sure to select one that fits on your stick. Note "
+"that the <quote>netboot <filename>mini.iso</filename></quote> image is not "
+"usable for this purpose."
 msgstr ""
 "Se si è utilizzato un'immagine <filename>hd-media</filename>, adesso si deve "
 "copiare il file ISO di un'immagine &debian;<footnote> <para> È possibile "
@@ -830,7 +990,21 @@ msgstr ""
 "(<userinput>umount /mnt</userinput>)."
 
 #. Tag: para
-#: install-methods.xml:529
+#: install-methods.xml:560
+#, no-c-format
+msgid ""
+"When you are done, unmount the USB memory stick (<userinput>umount /mnt</"
+"userinput>)."
+msgstr ""
+
+#. Tag: title
+#: install-methods.xml:573
+#, no-c-format
+msgid "Partitioning the USB stick"
+msgstr "Partizionamento della chiavetta USB"
+
+#. Tag: para
+#: install-methods.xml:574
 #, no-c-format
 msgid ""
 "Most USB sticks do not come pre-configured in such a way that Open Firmware "
@@ -860,7 +1034,7 @@ msgstr ""
 "pacchetto &debian; <classname>hfsutils</classname>."
 
 #. Tag: para
-#: install-methods.xml:546
+#: install-methods.xml:591
 #, no-c-format
 msgid ""
 "In order to start the kernel after booting from the USB stick, we will put a "
@@ -877,7 +1051,7 @@ msgstr ""
 "fare delle modifiche alla configurazione del bootloader."
 
 #. Tag: para
-#: install-methods.xml:555
+#: install-methods.xml:600
 #, no-c-format
 msgid ""
 "The normal <command>ybin</command> tool that comes with <command>yaboot</"
@@ -913,8 +1087,14 @@ msgstr ""
 "Firmware. Finita questa fase, il resto della preparazione della chiavetta "
 "USB può essere completata usando le comuni utilità Unix."
 
+#. Tag: title
+#: install-methods.xml:620
+#, no-c-format
+msgid "Adding the installer image"
+msgstr "Aggiunta dell'immagine dell'installatore"
+
 #. Tag: para
-#: install-methods.xml:576
+#: install-methods.xml:621
 #, no-c-format
 msgid ""
 "Mount the partition (<userinput>mount /dev/<replaceable>sdX2</replaceable> /"
@@ -925,31 +1105,31 @@ msgstr ""
 "Debian sulla chiavetta:"
 
 #. Tag: para
-#: install-methods.xml:583
+#: install-methods.xml:628
 #, no-c-format
 msgid "<filename>vmlinux</filename> (kernel binary)"
 msgstr "<filename>vmlinux</filename> (kernel)"
 
 #. Tag: para
-#: install-methods.xml:588
+#: install-methods.xml:633
 #, no-c-format
 msgid "<filename>initrd.gz</filename> (initial ramdisk image)"
 msgstr "<filename>initrd.gz</filename> (immagine del ramdisk iniziale)"
 
 #. Tag: para
-#: install-methods.xml:593
+#: install-methods.xml:638
 #, no-c-format
 msgid "<filename>yaboot.conf</filename> (yaboot configuration file)"
 msgstr "<filename>yaboot.conf</filename> (file di configurazione di yaboot)"
 
 #. Tag: para
-#: install-methods.xml:598
+#: install-methods.xml:643
 #, no-c-format
 msgid "<filename>boot.msg</filename> (optional boot message)"
 msgstr "<filename>boot.msg</filename> (messaggio opzionale di avvio)"
 
 #. Tag: para
-#: install-methods.xml:605
+#: install-methods.xml:650
 #, no-c-format
 msgid ""
 "The <filename>yaboot.conf</filename> configuration file should contain the "
@@ -985,7 +1165,7 @@ msgstr ""
 "dell'immagine che si vuole avviare."
 
 #. Tag: para
-#: install-methods.xml:615
+#: install-methods.xml:660
 #, no-c-format
 msgid ""
 "If you used an <filename>hd-media</filename> image, you should now copy the "
@@ -1006,13 +1186,13 @@ msgstr ""
 "(<userinput>umount /mnt</userinput>)."
 
 #. Tag: title
-#: install-methods.xml:643
+#: install-methods.xml:688
 #, no-c-format
 msgid "Preparing Files for Hard Disk Booting"
 msgstr "Preparazione dei file per l'avvio da disco fisso"
 
 #. Tag: para
-#: install-methods.xml:644
+#: install-methods.xml:689
 #, no-c-format
 msgid ""
 "The installer may be booted using boot files placed on an existing hard "
@@ -1028,7 +1208,7 @@ msgstr ""
 "senza la necessità di un bootloader."
 
 #. Tag: para
-#: install-methods.xml:652
+#: install-methods.xml:697
 #, no-c-format
 msgid ""
 "A full, <quote>pure network</quote> installation can be achieved using this "
@@ -1040,7 +1220,7 @@ msgstr ""
 "ricerca e la masterizzazione delle immagini dei CD/DVD."
 
 #. Tag: para
-#: install-methods.xml:658
+#: install-methods.xml:703
 #, no-c-format
 msgid ""
 "The installer cannot boot from files on an HFS+ file system. MacOS System "
@@ -1062,7 +1242,7 @@ msgstr ""
 "fra MacOS e Linux, in particolare per i file d'installazione."
 
 #. Tag: para
-#: install-methods.xml:669
+#: install-methods.xml:714
 #, no-c-format
 msgid ""
 "Different programs are used for hard disk installation system booting, "
@@ -1074,14 +1254,14 @@ msgstr ""
 "<quote>OldWorld</quote>."
 
 #. Tag: title
-#: install-methods.xml:678
+#: install-methods.xml:723
 #, no-c-format
 msgid "Hard disk installer booting from Linux using <command>GRUB</command>"
 msgstr ""
 "Avvio da Linux dell'installatore da disco fisso con <command>GRUB</command>"
 
 #. Tag: para
-#: install-methods.xml:680
+#: install-methods.xml:725
 #, no-c-format
 msgid ""
 "This section explains how to add to or even replace an existing linux "
@@ -1091,7 +1271,7 @@ msgstr ""
 "linux esistente usando <command>GRUB</command>."
 
 #. Tag: para
-#: install-methods.xml:686
+#: install-methods.xml:731
 #, no-c-format
 msgid ""
 "At boot time, <command>GRUB</command> supports loading in memory not only "
@@ -1103,7 +1283,7 @@ msgstr ""
 "essere usato come filesystem di root dal kernel."
 
 #. Tag: para
-#: install-methods.xml:692
+#: install-methods.xml:737
 #, no-c-format
 msgid ""
 "Copy the following files from the &debian; archives to a convenient location "
@@ -1113,19 +1293,19 @@ msgstr ""
 "disco fisso, per esempio <filename>/boot/newinstall/</filename>."
 
 #. Tag: para
-#: install-methods.xml:699
+#: install-methods.xml:744
 #, no-c-format
 msgid "<filename>vmlinuz</filename> (kernel binary)"
 msgstr "<filename>vmlinuz</filename> (kernel)"
 
 #. Tag: para
-#: install-methods.xml:704
+#: install-methods.xml:749
 #, no-c-format
 msgid "<filename>initrd.gz</filename> (ramdisk image)"
 msgstr "<filename>initrd.gz</filename> (immagine del ramdisk)"
 
 #. Tag: para
-#: install-methods.xml:711
+#: install-methods.xml:756
 #, no-c-format
 msgid ""
 "If you intend to use the hard drive only for booting and then download "
@@ -1141,7 +1321,7 @@ msgstr ""
 "operazione deve essere fatta con molta attenzione."
 
 #. Tag: para
-#: install-methods.xml:720
+#: install-methods.xml:765
 #, no-c-format
 msgid ""
 "Alternatively, if you intend to keep an existing partition on the hard drive "
@@ -1159,7 +1339,7 @@ msgstr ""
 "usando l'immagine, senza la necessità della rete."
 
 #. Tag: para
-#: install-methods.xml:728
+#: install-methods.xml:773
 #, no-c-format
 msgid ""
 "Finally, to configure the bootloader proceed to <xref linkend=\"boot-initrd"
@@ -1169,14 +1349,14 @@ msgstr ""
 "initrd\"/>."
 
 #. Tag: title
-#: install-methods.xml:738
+#: install-methods.xml:783
 #, no-c-format
 msgid "Hard disk installer booting from DOS using <command>loadlin</command>"
 msgstr ""
 "Avvio da DOS dell'installatore da disco fisso con <command>loadlin</command>"
 
 #. Tag: para
-#: install-methods.xml:739
+#: install-methods.xml:784
 #, no-c-format
 msgid ""
 "This section explains how to prepare your hard drive for booting the "
@@ -1186,7 +1366,7 @@ msgstr ""
 "avviare l'installatore da DOS usando <command>loadlin</command>."
 
 #. Tag: para
-#: install-methods.xml:744
+#: install-methods.xml:789
 #, no-c-format
 msgid ""
 "Copy the following directories from a &debian; installation image to "
@@ -1196,7 +1376,7 @@ msgstr ""
 "<filename>c:\\</filename>."
 
 #. Tag: para
-#: install-methods.xml:749
+#: install-methods.xml:794
 #, no-c-format
 msgid ""
 "<filename>/&x86-install-dir;</filename> (kernel binary and ramdisk image)"
@@ -1205,19 +1385,19 @@ msgstr ""
 "ramdisk)"
 
 #. Tag: para
-#: install-methods.xml:754
+#: install-methods.xml:799
 #, no-c-format
 msgid "<filename>/tools</filename> (loadlin tool)"
 msgstr "<filename>/tools</filename> (programma loadlin)"
 
 #. Tag: title
-#: install-methods.xml:866
+#: install-methods.xml:911
 #, no-c-format
 msgid "Preparing Files for TFTP Net Booting"
 msgstr "Preparazione dei file per l'avvio TFTP da rete"
 
 #. Tag: para
-#: install-methods.xml:867
+#: install-methods.xml:912
 #, no-c-format
 msgid ""
 "If your machine is connected to a local area network, you may be able to "
@@ -1233,7 +1413,7 @@ msgstr ""
 "per gestire l'avvio della propria macchina."
 
 #. Tag: para
-#: install-methods.xml:875
+#: install-methods.xml:920
 #, no-c-format
 msgid ""
 "You need to set up a TFTP server, and for many machines a DHCP server<phrase "
@@ -1245,7 +1425,7 @@ msgstr ""
 "condition=\"supports-bootp\"> o un server BOOTP</phrase>."
 
 #. Tag: para
-#: install-methods.xml:882
+#: install-methods.xml:927
 #, no-c-format
 msgid ""
 "<phrase condition=\"supports-rarp\">The Reverse Address Resolution Protocol "
@@ -1266,7 +1446,7 @@ msgstr ""
 "BOOTP. Alcuni sistemi possono essere configurati solo tramite DHCP."
 
 #. Tag: para
-#: install-methods.xml:896
+#: install-methods.xml:941
 #, no-c-format
 msgid ""
 "For PowerPC, if you have a NewWorld Power Macintosh machine, it is a good "
@@ -1278,7 +1458,7 @@ msgstr ""
 "non sono capaci di fare l'avvio usando BOOTP."
 
 #. Tag: para
-#: install-methods.xml:902
+#: install-methods.xml:947
 #, no-c-format
 msgid ""
 "Some older HPPA machines (e.g. 715/75) use RBOOTD rather than BOOTP. There "
@@ -1288,7 +1468,7 @@ msgstr ""
 "BOOTP, in &debian; è disponibile il pacchetto <classname>rbootd</classname>."
 
 #. Tag: para
-#: install-methods.xml:907
+#: install-methods.xml:952
 #, no-c-format
 msgid ""
 "The Trivial File Transfer Protocol (TFTP) is used to serve the boot image to "
@@ -1303,7 +1483,7 @@ msgstr ""
 "Solaris) e GNU/Linux."
 
 #. Tag: para
-#: install-methods.xml:915
+#: install-methods.xml:960
 #, no-c-format
 msgid ""
 "For a &debian-gnu; server we recommend <classname>tftpd-hpa</classname>. "
@@ -1317,13 +1497,13 @@ msgstr ""
 "<classname>atftpd</classname>."
 
 #. Tag: title
-#: install-methods.xml:931
+#: install-methods.xml:976
 #, no-c-format
 msgid "Setting up RARP server"
 msgstr "Attivazione di un server RARP"
 
 #. Tag: para
-#: install-methods.xml:932
+#: install-methods.xml:977
 #, no-c-format
 msgid ""
 "To set up RARP, you need to know the Ethernet address (a.k.a. the MAC "
@@ -1342,7 +1522,7 @@ msgstr ""
 "eth0</userinput>."
 
 #. Tag: para
-#: install-methods.xml:944
+#: install-methods.xml:989
 #, no-c-format
 msgid ""
 "On a RARP server system using a Linux kernel or Solaris/SunOS, you use the "
@@ -1366,13 +1546,13 @@ msgstr ""
 "(Solaris 1)."
 
 #. Tag: title
-#: install-methods.xml:965
+#: install-methods.xml:1010
 #, no-c-format
 msgid "Setting up a DHCP server"
 msgstr "Attivazione di un server DHCP"
 
 #. Tag: para
-#: install-methods.xml:966
+#: install-methods.xml:1011
 #, no-c-format
 msgid ""
 "One free software DHCP server is ISC <command>dhcpd</command>. For &debian-"
@@ -1386,7 +1566,7 @@ msgstr ""
 "etc/dhcp/dhcpd.conf</filename>):"
 
 #. Tag: screen
-#: install-methods.xml:973
+#: install-methods.xml:1018
 #, no-c-format
 msgid ""
 "option domain-name \"example.com\";\n"
@@ -1430,7 +1610,7 @@ msgstr ""
 "}"
 
 #. Tag: para
-#: install-methods.xml:975
+#: install-methods.xml:1020
 #, no-c-format
 msgid ""
 "In this example, there is one server <replaceable>servername</replaceable> "
@@ -1448,7 +1628,7 @@ msgstr ""
 "recuperato tramite TFTP."
 
 #. Tag: para
-#: install-methods.xml:985
+#: install-methods.xml:1030
 #, no-c-format
 msgid ""
 "After you have edited the <command>dhcpd</command> configuration file, "
@@ -1458,13 +1638,13 @@ msgstr ""
 "riavviarlo con <userinput>/etc/init.d/isc-dhcp-server restart</userinput>."
 
 #. Tag: title
-#: install-methods.xml:993
+#: install-methods.xml:1038
 #, no-c-format
 msgid "Enabling PXE Booting in the DHCP configuration"
 msgstr "Abilitare l'avvio PXE nella configurazione di DHCP"
 
 #. Tag: para
-#: install-methods.xml:994
+#: install-methods.xml:1039
 #, no-c-format
 msgid ""
 "Here is another example for a <filename>dhcp.conf</filename> using the Pre-"
@@ -1535,7 +1715,7 @@ msgstr ""
 "kernel (si consulti <xref linkend=\"tftp-images\"/>)."
 
 #. Tag: para
-#: install-methods.xml:1004
+#: install-methods.xml:1049
 #, no-c-format
 msgid ""
 "If your machine uses UEFI to boot, you will have to specify a boot loader "
@@ -1545,7 +1725,7 @@ msgstr ""
 "idoneo, per esempio"
 
 #. Tag: screen
-#: install-methods.xml:1008
+#: install-methods.xml:1053
 #, no-c-format
 msgid ""
 "group {\n"
@@ -1567,13 +1747,13 @@ msgstr ""
 "}"
 
 #. Tag: title
-#: install-methods.xml:1021
+#: install-methods.xml:1066
 #, no-c-format
 msgid "Setting up a BOOTP server"
 msgstr "Attivazione di un server BOOTP"
 
 #. Tag: para
-#: install-methods.xml:1022
+#: install-methods.xml:1067
 #, no-c-format
 msgid ""
 "There are two BOOTP servers available for GNU/Linux. The first is CMU "
@@ -1588,7 +1768,7 @@ msgstr ""
 "<classname>bootp</classname> e <classname>isc-dhcp-server</classname>."
 
 #. Tag: para
-#: install-methods.xml:1030
+#: install-methods.xml:1075
 #, no-c-format
 msgid ""
 "To use CMU <command>bootpd</command>, you must first uncomment (or add) the "
@@ -1654,7 +1834,7 @@ msgstr ""
 "phrase>"
 
 #. Tag: para
-#: install-methods.xml:1063
+#: install-methods.xml:1108
 #, no-c-format
 msgid ""
 "By contrast, setting up BOOTP with ISC <command>dhcpd</command> is really "
@@ -1679,13 +1859,13 @@ msgstr ""
 "restart</userinput>."
 
 #. Tag: title
-#: install-methods.xml:1082
+#: install-methods.xml:1127
 #, no-c-format
 msgid "Enabling the TFTP Server"
 msgstr "Attivazione di un server TFTP"
 
 #. Tag: para
-#: install-methods.xml:1083
+#: install-methods.xml:1128
 #, no-c-format
 msgid ""
 "To get the TFTP server ready to go, you should first make sure that "
@@ -1695,7 +1875,7 @@ msgstr ""
 "<command>tftpd</command> sia attivo."
 
 #. Tag: para
-#: install-methods.xml:1088
+#: install-methods.xml:1133
 #, no-c-format
 msgid ""
 "In the case of <classname>tftpd-hpa</classname> there are two ways the "
@@ -1711,7 +1891,7 @@ msgstr ""
 "modificata riconfigurando il pacchetto."
 
 #. Tag: para
-#: install-methods.xml:1097
+#: install-methods.xml:1142
 #, no-c-format
 msgid ""
 "Historically, TFTP servers used <filename>/tftpboot</filename> as directory "
@@ -1730,7 +1910,7 @@ msgstr ""
 "in base alla propria configurazione."
 
 #. Tag: para
-#: install-methods.xml:1107
+#: install-methods.xml:1152
 #, no-c-format
 msgid ""
 "All <command>in.tftpd</command> alternatives available in &debian; should "
@@ -1746,7 +1926,7 @@ msgstr ""
 "un ottimo punto di partenza per la diagnosi della causa degli errori."
 
 #. Tag: para
-#: install-methods.xml:1115
+#: install-methods.xml:1160
 #, no-c-format
 msgid ""
 "If you intend to install &debian; on an SGI machine and your TFTP server is "
@@ -1777,13 +1957,13 @@ msgstr ""
 "usate sul server TFTP Linux."
 
 #. Tag: title
-#: install-methods.xml:1137
+#: install-methods.xml:1182
 #, no-c-format
 msgid "Move TFTP Images Into Place"
 msgstr "Posizionamento delle immagini TFTP"
 
 #. Tag: para
-#: install-methods.xml:1138
+#: install-methods.xml:1183
 #, no-c-format
 msgid ""
 "Next, place the TFTP boot image you need, as found in <xref linkend=\"where-"
@@ -1800,7 +1980,7 @@ msgstr ""
 "esiste uno standard."
 
 #. Tag: para
-#: install-methods.xml:1147
+#: install-methods.xml:1192
 #, no-c-format
 msgid ""
 "On NewWorld Power Macintosh machines, you will need to set up the "
@@ -1816,37 +1996,37 @@ msgstr ""
 "<filename>netboot/</filename>:"
 
 #. Tag: filename
-#: install-methods.xml:1158
+#: install-methods.xml:1203
 #, no-c-format
 msgid "vmlinux"
 msgstr "vmlinux"
 
 #. Tag: filename
-#: install-methods.xml:1163
+#: install-methods.xml:1208
 #, no-c-format
 msgid "initrd.gz"
 msgstr "initrd.gz"
 
 #. Tag: filename
-#: install-methods.xml:1168
+#: install-methods.xml:1213
 #, no-c-format
 msgid "yaboot"
 msgstr "yaboot"
 
 #. Tag: filename
-#: install-methods.xml:1173
+#: install-methods.xml:1218
 #, no-c-format
 msgid "yaboot.conf"
 msgstr "yaboot.conf"
 
 #. Tag: filename
-#: install-methods.xml:1178
+#: install-methods.xml:1223
 #, no-c-format
 msgid "boot.msg"
 msgstr "boot.msg"
 
 #. Tag: para
-#: install-methods.xml:1183
+#: install-methods.xml:1228
 #, no-c-format
 msgid ""
 "For PXE booting, everything you should need is set up in the "
@@ -1867,7 +2047,7 @@ msgstr ""
 "efi</filename>)."
 
 #. Tag: para
-#: install-methods.xml:1193
+#: install-methods.xml:1238
 #, no-c-format
 msgid ""
 "For PXE booting, everything you should need is set up in the "
@@ -1883,13 +2063,13 @@ msgstr ""
 "ia64/elilo.efi</filename> come file da avviare a <command>tftpd</command>."
 
 #. Tag: title
-#: install-methods.xml:1205
+#: install-methods.xml:1250
 #, no-c-format
 msgid "SPARC TFTP Booting"
 msgstr "Avvio di macchine SPARC con TFTP"
 
 #. Tag: para
-#: install-methods.xml:1206
+#: install-methods.xml:1251
 #, no-c-format
 msgid ""
 "Some SPARC architectures add the subarchitecture names, such as "
@@ -1921,7 +2101,7 @@ msgstr ""
 "aggiungere il nome della sottoarchitettura."
 
 #. Tag: para
-#: install-methods.xml:1222
+#: install-methods.xml:1267
 #, no-c-format
 msgid ""
 "If you've done all this correctly, giving the command <userinput>boot net</"
@@ -1935,7 +2115,7 @@ msgstr ""
 "del server tftp quale nome è stato usato per richiederla."
 
 #. Tag: para
-#: install-methods.xml:1229
+#: install-methods.xml:1274
 #, no-c-format
 msgid ""
 "You can also force some sparc systems to look for a specific file name by "
@@ -1949,13 +2129,13 @@ msgstr ""
 "nella directory in cui il server TFTP ricerca i file."
 
 #. Tag: title
-#: install-methods.xml:1240
+#: install-methods.xml:1285
 #, no-c-format
 msgid "SGI TFTP Booting"
 msgstr "Avvio di macchine SGI con TFTP"
 
 #. Tag: para
-#: install-methods.xml:1241
+#: install-methods.xml:1286
 #, no-c-format
 msgid ""
 "On SGI machines you can rely on the <command>bootpd</command> to supply the "
@@ -1970,13 +2150,13 @@ msgstr ""
 "filename>."
 
 #. Tag: title
-#: install-methods.xml:1349
+#: install-methods.xml:1394
 #, no-c-format
 msgid "Automatic Installation"
 msgstr "Installazione automatizzata"
 
 #. Tag: para
-#: install-methods.xml:1350
+#: install-methods.xml:1395
 #, no-c-format
 msgid ""
 "For installing on multiple computers it's possible to do fully automatic "
@@ -1993,13 +2173,13 @@ msgstr ""
 "dettagliate."
 
 #. Tag: title
-#: install-methods.xml:1362
+#: install-methods.xml:1407
 #, no-c-format
 msgid "Automatic Installation Using the &debian; Installer"
 msgstr "Installazione automatizzata usando l'Installatore &debian;"
 
 #. Tag: para
-#: install-methods.xml:1363
+#: install-methods.xml:1408
 #, no-c-format
 msgid ""
 "The &debian; Installer supports automating installs via preconfiguration "
@@ -2013,7 +2193,7 @@ msgstr ""
 "domande che sarebbero normalmente poste durante il processo d'installazione."
 
 #. Tag: para
-#: install-methods.xml:1370
+#: install-methods.xml:1415
 #, no-c-format
 msgid ""
 "Full documentation on preseeding including a working example that you can "
@@ -2024,13 +2204,13 @@ msgstr ""
 "\"appendix-preseed\"/>."
 
 #. Tag: title
-#: install-methods.xml:1384
+#: install-methods.xml:1429
 #, no-c-format
 msgid "Verifying the integrity of installation files"
 msgstr "Verificare l'integrità dei file per l'installazione"
 
 #. Tag: para
-#: install-methods.xml:1386
+#: install-methods.xml:1431
 #, no-c-format
 msgid ""
 "You can verify the integrity of downloaded files against checksums provided "
@@ -2045,7 +2225,7 @@ msgstr ""
 "seguenti directory:"
 
 #. Tag: para
-#: install-methods.xml:1397
+#: install-methods.xml:1442
 #, no-c-format
 msgid ""
 "<ulink url=\"https://cdimage.debian.org/debian-cd/current/&architecture;/iso-"
@@ -2055,7 +2235,7 @@ msgstr ""
 "cd/\">file con i codici di controllo delle immagini dei CD</ulink>,"
 
 #. Tag: para
-#: install-methods.xml:1403
+#: install-methods.xml:1448
 #, no-c-format
 msgid ""
 "<ulink url=\"https://cdimage.debian.org/debian-cd/current/&architecture;/iso-"
@@ -2065,7 +2245,7 @@ msgstr ""
 "dvd/\">file con i codici di controllo delle immagini dei DVD</ulink>,"
 
 #. Tag: para
-#: install-methods.xml:1409
+#: install-methods.xml:1454
 #, no-c-format
 msgid ""
 "<ulink url=\"https://cdimage.debian.org/debian-cd/current/&architecture;/iso-"
@@ -2075,7 +2255,7 @@ msgstr ""
 "bd/\">file con i codici di controllo delle immagini dei BD</ulink>,"
 
 #. Tag: para
-#: install-methods.xml:1415
+#: install-methods.xml:1460
 #, no-c-format
 msgid ""
 "<ulink url=\"http://http.us.debian.org/debian/dists/&releasename;/main/"
@@ -2087,7 +2267,7 @@ msgstr ""
 "degli altri file per l'installazione</ulink>."
 
 #. Tag: para
-#: install-methods.xml:1423
+#: install-methods.xml:1468
 #, no-c-format
 msgid ""
 "To compute the checksum of a downloaded installation file, use "
@@ -2109,7 +2289,7 @@ msgstr ""
 "<filename>SHA512SUMS</filename>."
 
 #. Tag: para
-#: install-methods.xml:1436
+#: install-methods.xml:1481
 #, no-c-format
 msgid ""
 "The <ulink url=\"&url-debian-cd-faq;\">Debian CD FAQ</ulink> has <ulink url="
@@ -2127,6 +2307,26 @@ msgstr ""
 "file con i codici di controllo."
 
 #~ msgid ""
+#~ "Create a second, FAT partition on the stick, mount the partition and copy "
+#~ "or unpack the firmware onto it. For example:"
+#~ msgstr ""
+#~ "Creare sulla chiavetta una seconda partizione FAT, montare la partizione "
+#~ "e copiare o spacchettare il firmware al suo interno. Per esempio:"
+
+#~ msgid ""
+#~ "# mount /dev/<replaceable>sdX2</replaceable> /mnt\n"
+#~ "# cd /mnt\n"
+#~ "# tar zxvf <replaceable>/path/to/</replaceable>firmware.tar.gz\n"
+#~ "# cd /\n"
+#~ "# umount /mnt"
+#~ msgstr ""
+#~ "# mount /dev/<replaceable>sdX2</replaceable> /mnt\n"
+#~ "# cd /mnt\n"
+#~ "# tar zxvf <replaceable>/percorso/di/</replaceable>firmware.tar.gz\n"
+#~ "# cd /\n"
+#~ "# umount /mnt"
+
+#~ msgid ""
 #~ "Hard disk installer booting from Linux using <command>LILO</command> or "
 #~ "<command>GRUB</command>"
 #~ msgstr ""