Clean-up - sync translations, where possible

1 files changed, 214 insertions, 454 deletions

diff --git a/po/hu/install-methods.po b/po/hu/install-methods.po
index a3b9c962f..cd922d1ff 100644
--- a/po/hu/install-methods.po
+++ b/po/hu/install-methods.po
@@ -5,7 +5,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2021-10-27 23:02+0000\n"
+"POT-Creation-Date: 2022-05-19 22:02+0000\n"
 "PO-Revision-Date: 2007-03-18 18:13+0100\n"
 "Last-Translator: SZERVÁC Attila <sas@321.hu>\n"
 "Language-Team: Hungarian <debian-l10n-hungarian@lists.debian>\n"
@@ -511,16 +511,14 @@ msgstr ""
 msgid ""
 "There is an all-in-one file &hdmedia-boot-img; which contains all the "
 "installer files (including the kernel)<phrase arch=\"x86\"> as well as "
-"<classname>syslinux</classname> and its configuration file</phrase><phrase "
-"arch=\"powerpc\"> as well as <classname>yaboot</classname> and its "
-"configuration file</phrase>."
+"<classname>syslinux</classname> and its configuration file</phrase>."
 msgstr ""
 "Van egy minden-egyben &hdmedia-boot-img; fájl, benne az összes telepítő fájl "
 "(a kernel is), a <command>SYSLINUX</command> és beállító fájlja. Csak ki "
 "kell bontani az USB tárra:"
 
 #. Tag: para
-#: install-methods.xml:371
+#: install-methods.xml:369
 #, no-c-format
 msgid ""
 "Note that, although convenient, this method does have one major "
@@ -531,46 +529,19 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:379
+#: install-methods.xml:377
 #, no-c-format
 msgid "Simply extract this image directly to your USB stick:"
 msgstr ""
 
 #. Tag: screen
-#: install-methods.xml:383
+#: install-methods.xml:381
 #, no-c-format
 msgid "# zcat boot.img.gz &gt; /dev/<replaceable>sdX</replaceable>"
 msgstr "# zcat boot.img.gz &gt; /dev/<replaceable>sdX</replaceable>"
 
 #. Tag: para
-#: install-methods.xml:385
-#, fuzzy, no-c-format
-#| msgid ""
-#| "There is an all-in-one file <filename>hd-media/boot.img.gz</filename> "
-#| "which contains all the installer files (including the kernel) as well as "
-#| "<command>yaboot</command> and its configuration file. Create a partition "
-#| "of type \"Apple_Bootstrap\" on your USB stick using <command>mac-fdisk</"
-#| "command>'s <userinput>C</userinput> command and extract the image "
-#| "directly to that:"
-msgid ""
-"Create a partition of type \"Apple_Bootstrap\" on your USB stick using "
-"<command>mac-fdisk</command>'s <userinput>C</userinput> command and extract "
-"the image directly to that:"
-msgstr ""
-"Van egy minden-egyben <filename>hd-media/boot.img.gz</filename> fájl, benne "
-"az összes telepítő fájl (a kernel is), a <command>yaboot</command> és "
-"beállító fájlja. Készíts egy \"Apple_Bootstrap\" partíciót az USB táron a "
-"<command>mac-fdisk</command> <userinput>C</userinput> parancsával és bontsd "
-"ki rá a képet így:"
-
-#. Tag: screen
-#: install-methods.xml:391
-#, no-c-format
-msgid "# zcat boot.img.gz &gt; /dev/<replaceable>sdX2</replaceable>"
-msgstr "# zcat boot.img.gz &gt; /dev/<replaceable>sdX2</replaceable>"
-
-#. Tag: para
-#: install-methods.xml:393
+#: install-methods.xml:397
 #, fuzzy, no-c-format
 #| msgid ""
 #| "After that, mount the USB memory stick (<userinput>mount <replaceable "
@@ -598,14 +569,14 @@ msgstr ""
 "le (<userinput>umount /mnt</userinput>) és kész."
 
 #. Tag: title
-#: install-methods.xml:411
+#: install-methods.xml:415
 #, fuzzy, no-c-format
 #| msgid "Copying the files &mdash; the flexible way"
 msgid "Manually copying files to the USB stick &mdash; the flexible way"
 msgstr "Fájlok másolása &mdash; a rugalmas mód"
 
 #. Tag: para
-#: install-methods.xml:412
+#: install-methods.xml:416
 #, fuzzy, no-c-format
 #| msgid ""
 #| "If you like more flexibility or just want to know what's going on, you "
@@ -621,13 +592,13 @@ msgstr ""
 "alábbi módszer is használható."
 
 #. Tag: title
-#: install-methods.xml:427
+#: install-methods.xml:431
 #, no-c-format
 msgid "Partitioning and adding a boot loader"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:428
+#: install-methods.xml:432
 #, no-c-format
 msgid ""
 "We will show how to set up the memory stick to use the first partition, "
@@ -637,7 +608,7 @@ msgstr ""
 "helyett."
 
 #. Tag: para
-#: install-methods.xml:433
+#: install-methods.xml:437
 #, fuzzy, no-c-format
 #| msgid ""
 #| "In order to start the kernel after booting from the USB stick, we will "
@@ -663,7 +634,7 @@ msgstr ""
 "beállításainak módosítására."
 
 #. Tag: para
-#: install-methods.xml:443
+#: install-methods.xml:447
 #, no-c-format
 msgid ""
 "First, you need to install the <classname>syslinux</classname> and "
@@ -671,7 +642,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:448
+#: install-methods.xml:452
 #, fuzzy, no-c-format
 #| msgid ""
 #| "Since most USB sticks come pre-configured with a single FAT16 partition, "
@@ -709,7 +680,7 @@ msgstr ""
 "csomagban van."
 
 #. Tag: para
-#: install-methods.xml:471
+#: install-methods.xml:475
 #, fuzzy, no-c-format
 #| msgid ""
 #| "To put <classname>syslinux</classname> on the FAT16 partition on your USB "
@@ -742,14 +713,14 @@ msgstr ""
 "tartalmazó <filename>ldlinux.sys</filename> fájlt."
 
 #. Tag: title
-#: install-methods.xml:487
+#: install-methods.xml:491
 #, fuzzy, no-c-format
 #| msgid "Adding an ISO image"
 msgid "Adding the installer files"
 msgstr "ISO kép hozzáadása"
 
 #. Tag: para
-#: install-methods.xml:488
+#: install-methods.xml:492
 #, no-c-format
 msgid ""
 "There are two different installation variants to choose here: The hd-media "
@@ -759,7 +730,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:495
+#: install-methods.xml:499
 #, fuzzy, no-c-format
 #| msgid ""
 #| "Mount the partition (<userinput>mount /dev/sda1 /mnt</userinput>) and "
@@ -793,7 +764,7 @@ msgstr ""
 "feledd, hogy a <command>SYSLINUX</command> csak DOS (8.3) neveket dolgoz fel."
 
 #. Tag: para
-#: install-methods.xml:519
+#: install-methods.xml:523
 #, no-c-format
 msgid ""
 "Then mount the partition (<userinput>mount /dev/<replaceable>sdX1</"
@@ -802,7 +773,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:525
+#: install-methods.xml:529
 #, fuzzy, no-c-format
 #| msgid ""
 #| "The <filename>syslinux.cfg</filename> configuration file should contain "
@@ -829,7 +800,7 @@ msgstr ""
 "userinput> paraméter növelése szükséges lehet, az indító képnek megfelelően."
 
 #. Tag: para
-#: install-methods.xml:536
+#: install-methods.xml:540
 #, no-c-format
 msgid ""
 "For the graphical installer (from <filename>gtk</filename>) you should add "
@@ -838,7 +809,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:542
+#: install-methods.xml:546
 #, no-c-format
 msgid ""
 "To enable the boot prompt to permit further parameter appending, add a "
@@ -846,7 +817,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:547
+#: install-methods.xml:551
 #, no-c-format
 msgid ""
 "If you used files from <filename>hd-media</filename>, you should now copy "
@@ -855,7 +826,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:553
+#: install-methods.xml:557
 #, no-c-format
 msgid ""
 "You can use either a netinst or a full CD/DVD image (see <xref linkend="
@@ -865,7 +836,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:560
+#: install-methods.xml:564
 #, fuzzy, no-c-format
 #| msgid ""
 #| "When you are done, unmount the USB memory stick (<userinput>umount /mnt</"
@@ -878,162 +849,13 @@ msgstr ""
 "userinput>) és esetleg tedd írásvédetté."
 
 #. Tag: title
-#: install-methods.xml:573
-#, fuzzy, no-c-format
-#| msgid "Booting the USB stick"
-msgid "Partitioning the USB stick"
-msgstr "Az USB tár indítása"
-
-#. Tag: para
-#: install-methods.xml:574
-#, fuzzy, no-c-format
-#| msgid ""
-#| "Since most USB sticks come pre-configured with a single FAT16 partition, "
-#| "you probably won't have to repartition or reformat the stick. If you have "
-#| "to do that anyway, use <command>cfdisk</command> or any other "
-#| "partitioning tool to create a FAT16 partition, and then create the "
-#| "filesystem using: <informalexample><screen>\n"
-#| "# mkdosfs /dev/<replaceable>sda1</replaceable>\n"
-#| "</screen></informalexample> Take care that you use the correct device "
-#| "name for your USB stick. The <command>mkdosfs</command> command is "
-#| "contained in the <classname>dosfstools</classname> Debian package."
-msgid ""
-"Most USB sticks do not come pre-configured in such a way that Open Firmware "
-"can boot from them, so you will need to repartition the stick. On Mac "
-"systems, run <userinput>mac-fdisk /dev/<replaceable>sdX</replaceable></"
-"userinput>, initialise a new partition map using the <userinput>i</"
-"userinput> command, and create a new partition of type Apple_Bootstrap using "
-"the <userinput>C</userinput> command. (Note that the first \"partition\" "
-"will always be the partition map itself.) Then type "
-"<informalexample><screen>\n"
-"$ hformat /dev/<replaceable>sdX2</replaceable>\n"
-"</screen></informalexample> Take care that you use the correct device name "
-"for your USB stick. The <command>hformat</command> command is contained in "
-"the <classname>hfsutils</classname> &debian; package."
-msgstr ""
-"Mivel bármilyen furcsa a legtöbb USB memórián eleve egy FAT16 partíció van, "
-"így nem biztos, hogy újra kell particionálnod, vagy formázni azt. Ha viszont "
-"ezt szeretnéd, használd a <command>cfdisk</command> vagy bármely más "
-"particionáló eszközt FAT16 partíció létrehozásához, majd hozd létre a "
-"fájlrendszert így: <informalexample><screen>\n"
-"# mkdosfs /dev/<replaceable>sda1</replaceable>\n"
-"</screen></informalexample> Figyelj, hogy helyesen add meg az eszköz nevét. "
-"Az <command>mkdosfs</command> a <classname>dosfstools</classname> &debian; "
-"csomagban van."
-
-#. Tag: para
-#: install-methods.xml:591
-#, no-c-format
-msgid ""
-"In order to start the kernel after booting from the USB stick, we will put a "
-"boot loader on the stick. The <command>yaboot</command> boot loader can be "
-"installed on an HFS filesystem and can be reconfigured by just editing a "
-"text file. Any operating system which supports the HFS file system can be "
-"used to make changes to the configuration of the boot loader."
-msgstr ""
-
-#. Tag: para
-#: install-methods.xml:600
-#, no-c-format
-msgid ""
-"The normal <command>ybin</command> tool that comes with <command>yaboot</"
-"command> does not yet understand USB storage devices, so you will have to "
-"install <command>yaboot</command> by hand using the <classname>hfsutils</"
-"classname> tools. Type <informalexample><screen>\n"
-"$ hmount /dev/<replaceable>sdX2</replaceable>\n"
-"$ hcopy -r /usr/lib/yaboot/yaboot :\n"
-"$ hattrib -c UNIX -t tbxi :yaboot\n"
-"$ hattrib -b :\n"
-"$ humount\n"
-"</screen></informalexample> Again, take care that you use the correct device "
-"name. The partition must not be otherwise mounted during this procedure. "
-"This procedure writes the boot loader to the partition, and uses the HFS "
-"utilities to mark it in such a way that Open Firmware will boot it. Having "
-"done this, the rest of the USB stick may be prepared using the normal Unix "
-"utilities."
-msgstr ""
-
-#. Tag: title
-#: install-methods.xml:620
-#, fuzzy, no-c-format
-#| msgid "Adding an ISO image"
-msgid "Adding the installer image"
-msgstr "ISO kép hozzáadása"
-
-#. Tag: para
-#: install-methods.xml:621
-#, no-c-format
-msgid ""
-"Mount the partition (<userinput>mount /dev/<replaceable>sdX2</replaceable> /"
-"mnt</userinput>) and copy the following installer image files to the stick:"
-msgstr ""
-
-#. Tag: para
-#: install-methods.xml:628
-#, no-c-format
-msgid "<filename>vmlinux</filename> (kernel binary)"
-msgstr ""
-
-#. Tag: para
-#: install-methods.xml:633
-#, no-c-format
-msgid "<filename>initrd.gz</filename> (initial ramdisk image)"
-msgstr ""
-
-#. Tag: para
-#: install-methods.xml:638
-#, no-c-format
-msgid "<filename>yaboot.conf</filename> (yaboot configuration file)"
-msgstr ""
-
-#. Tag: para
-#: install-methods.xml:643
-#, no-c-format
-msgid "<filename>boot.msg</filename> (optional boot message)"
-msgstr ""
-
-#. Tag: para
-#: install-methods.xml:650
-#, no-c-format
-msgid ""
-"The <filename>yaboot.conf</filename> configuration file should contain the "
-"following lines: <informalexample><screen>\n"
-"default=install\n"
-"root=/dev/ram\n"
-"\n"
-"message=/boot.msg\n"
-"\n"
-"image=/vmlinux\n"
-"        label=install\n"
-"        initrd=/initrd.gz\n"
-"        initrd-size=10000\n"
-"        read-only\n"
-"</screen></informalexample> Please note that the <userinput>initrd-size</"
-"userinput> parameter may need to be increased, depending on the image you "
-"are booting."
-msgstr ""
-
-#. Tag: para
-#: install-methods.xml:660
-#, no-c-format
-msgid ""
-"If you used an <filename>hd-media</filename> image, you should now copy the "
-"ISO file of a &debian; ISO image<footnote> <para> You can use either a "
-"netinst or a full CD image (see <xref linkend=\"official-cdrom\"/>). Be sure "
-"to select one that fits. Note that the <quote>netboot <filename>mini.iso</"
-"filename></quote> image is not usable for this purpose. </para> </footnote> "
-"onto the stick. When you are done, unmount the USB memory stick "
-"(<userinput>umount /mnt</userinput>)."
-msgstr ""
-
-#. Tag: title
-#: install-methods.xml:688
+#: install-methods.xml:694
 #, no-c-format
 msgid "Preparing Files for Hard Disk Booting"
 msgstr "Fájlok előkészítése merevlemez indításhoz"
 
 #. Tag: para
-#: install-methods.xml:689
+#: install-methods.xml:695
 #, fuzzy, no-c-format
 #| msgid ""
 #| "The installer may be booted using boot files placed on an existing hard "
@@ -1051,7 +873,7 @@ msgstr ""
 "általi közvetlen meghívásával."
 
 #. Tag: para
-#: install-methods.xml:697
+#: install-methods.xml:703
 #, fuzzy, no-c-format
 #| msgid ""
 #| "A full, <quote>pure network</quote> installation can be achieved using "
@@ -1067,31 +889,8 @@ msgstr ""
 "elkerüli a mozgó média bonyodalmait, mint CD találás és írás vagy több, "
 "megbízhatatlan flopi lemezzel küzdés."
 
-#. Tag: para
-#: install-methods.xml:703
-#, no-c-format
-msgid ""
-"The installer cannot boot from files on an HFS+ file system. MacOS System "
-"8.1 and above may use HFS+ file systems; NewWorld PowerMacs all use HFS+. To "
-"determine whether your existing file system is HFS+, select <userinput>Get "
-"Info</userinput> for the volume in question. HFS file systems appear as "
-"<userinput>Mac OS Standard</userinput>, while HFS+ file systems say "
-"<userinput>Mac OS Extended</userinput>. You must have an HFS partition in "
-"order to exchange files between MacOS and Linux, in particular the "
-"installation files you download."
-msgstr ""
-
-#. Tag: para
-#: install-methods.xml:714
-#, no-c-format
-msgid ""
-"Different programs are used for hard disk installation system booting, "
-"depending on whether the system is a <quote>NewWorld</quote> or an "
-"<quote>OldWorld</quote> model."
-msgstr ""
-
 #. Tag: title
-#: install-methods.xml:723
+#: install-methods.xml:733
 #, fuzzy, no-c-format
 #| msgid ""
 #| "Hard disk installer booting using <command>LILO</command> or "
@@ -1102,7 +901,7 @@ msgstr ""
 "command> használatával"
 
 #. Tag: para
-#: install-methods.xml:725
+#: install-methods.xml:735
 #, fuzzy, no-c-format
 #| msgid ""
 #| "This section explains how to add to or even replace an existing linux "
@@ -1117,7 +916,7 @@ msgstr ""
 "használatával."
 
 #. Tag: para
-#: install-methods.xml:731
+#: install-methods.xml:741
 #, fuzzy, no-c-format
 #| msgid ""
 #| "At boot time, both bootloaders support loading in memory not only the "
@@ -1133,7 +932,7 @@ msgstr ""
 "rendszerként használható."
 
 #. Tag: para
-#: install-methods.xml:737
+#: install-methods.xml:747
 #, fuzzy, no-c-format
 #| msgid ""
 #| "Copy the following files from the Debian archives to a convenient "
@@ -1147,19 +946,19 @@ msgstr ""
 "merevlemezre, például ide: <filename>/boot/newinstall/</filename>."
 
 #. Tag: para
-#: install-methods.xml:744
+#: install-methods.xml:754
 #, no-c-format
 msgid "<filename>vmlinuz</filename> (kernel binary)"
 msgstr "<filename>vmlinuz</filename> (kernel bináris)"
 
 #. Tag: para
-#: install-methods.xml:749
+#: install-methods.xml:759
 #, no-c-format
 msgid "<filename>initrd.gz</filename> (ramdisk image)"
 msgstr "<filename>initrd.gz</filename> (ramlemez kép)"
 
 #. Tag: para
-#: install-methods.xml:756
+#: install-methods.xml:766
 #, no-c-format
 msgid ""
 "If you intend to use the hard drive only for booting and then download "
@@ -1174,7 +973,7 @@ msgstr ""
 "merevlemez, körültekintően."
 
 #. Tag: para
-#: install-methods.xml:765
+#: install-methods.xml:775
 #, fuzzy, no-c-format
 msgid ""
 "Alternatively, if you intend to keep an existing partition on the hard drive "
@@ -1191,7 +990,7 @@ msgstr ""
 "nélkül."
 
 #. Tag: para
-#: install-methods.xml:773
+#: install-methods.xml:783
 #, no-c-format
 msgid ""
 "Finally, to configure the bootloader proceed to <xref linkend=\"boot-initrd"
@@ -1201,7 +1000,7 @@ msgstr ""
 "\"/>."
 
 #. Tag: title
-#: install-methods.xml:783
+#: install-methods.xml:793
 #, fuzzy, no-c-format
 #| msgid ""
 #| "Hard disk installer booting using <command>LILO</command> or "
@@ -1212,7 +1011,7 @@ msgstr ""
 "command> használatával"
 
 #. Tag: para
-#: install-methods.xml:784
+#: install-methods.xml:794
 #, fuzzy, no-c-format
 #| msgid ""
 #| "This section explains how to add to or even replace an existing linux "
@@ -1227,7 +1026,7 @@ msgstr ""
 "használatával."
 
 #. Tag: para
-#: install-methods.xml:789
+#: install-methods.xml:799
 #, fuzzy, no-c-format
 #| msgid ""
 #| "Copy the following files from the Debian archives to a convenient "
@@ -1241,7 +1040,7 @@ msgstr ""
 "merevlemezre, például ide: <filename>/boot/newinstall/</filename>."
 
 #. Tag: para
-#: install-methods.xml:794
+#: install-methods.xml:804
 #, fuzzy, no-c-format
 #| msgid "<filename>initrd.gz</filename> (ramdisk image)"
 msgid ""
@@ -1249,20 +1048,20 @@ msgid ""
 msgstr "<filename>initrd.gz</filename> (ramlemez kép)"
 
 #. Tag: para
-#: install-methods.xml:799
+#: install-methods.xml:809
 #, fuzzy, no-c-format
 #| msgid "<filename>initrd.gz</filename> (ramdisk image)"
 msgid "<filename>/tools</filename> (loadlin tool)"
 msgstr "<filename>initrd.gz</filename> (ramlemez kép)"
 
 #. Tag: title
-#: install-methods.xml:911
+#: install-methods.xml:827
 #, no-c-format
 msgid "Preparing Files for TFTP Net Booting"
 msgstr "Fájlok előkészítése TFTP hálózati indításhoz"
 
 #. Tag: para
-#: install-methods.xml:912
+#: install-methods.xml:828
 #, no-c-format
 msgid ""
 "If your machine is connected to a local area network, you may be able to "
@@ -1277,7 +1076,7 @@ msgstr ""
 "állítani rajta, hogy támogassa az adott géped indítását."
 
 #. Tag: para
-#: install-methods.xml:920
+#: install-methods.xml:836
 #, no-c-format
 msgid ""
 "You need to set up a TFTP server, and for many machines a DHCP server<phrase "
@@ -1289,7 +1088,7 @@ msgstr ""
 "condition=\"supports-dhcp\">, vagy BOOTP kiszolgálót</phrase>."
 
 #. Tag: para
-#: install-methods.xml:927
+#: install-methods.xml:843
 #, no-c-format
 msgid ""
 "<phrase condition=\"supports-rarp\">The Reverse Address Resolution Protocol "
@@ -1309,26 +1108,7 @@ msgstr ""
 "rendszerek csak DHCP módon állíthatók be."
 
 #. Tag: para
-#: install-methods.xml:941
-#, no-c-format
-msgid ""
-"For PowerPC, if you have a NewWorld Power Macintosh machine, it is a good "
-"idea to use DHCP instead of BOOTP. Some of the latest machines are unable to "
-"boot using BOOTP."
-msgstr ""
-
-#. Tag: para
-#: install-methods.xml:947
-#, no-c-format
-msgid ""
-"Some older HPPA machines (e.g. 715/75) use RBOOTD rather than BOOTP. There "
-"is an <classname>rbootd</classname> package available in &debian;."
-msgstr ""
-"Pár régibb HPPA gép (például a 715/75) RBOOTD-t használ BOOTP helyett. A "
-"&debian; tartalmaz <classname>rbootd</classname> csomagot."
-
-#. Tag: para
-#: install-methods.xml:952
+#: install-methods.xml:869
 #, no-c-format
 msgid ""
 "The Trivial File Transfer Protocol (TFTP) is used to serve the boot image to "
@@ -1342,7 +1122,7 @@ msgstr ""
 "(más nevén Solaris), és GNU/Linux parancsokat adunk."
 
 #. Tag: para
-#: install-methods.xml:960
+#: install-methods.xml:877
 #, no-c-format
 msgid ""
 "For a &debian-gnu; server we recommend <classname>tftpd-hpa</classname>. "
@@ -1352,13 +1132,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:976
+#: install-methods.xml:893
 #, no-c-format
 msgid "Setting up RARP server"
 msgstr "RARP szerver beállítása"
 
 #. Tag: para
-#: install-methods.xml:977
+#: install-methods.xml:894
 #, fuzzy, no-c-format
 #| msgid ""
 #| "To set up RARP, you need to know the Ethernet address (a.k.a. the MAC "
@@ -1371,9 +1151,7 @@ msgstr "RARP szerver beállítása"
 msgid ""
 "To set up RARP, you need to know the Ethernet address (a.k.a. the MAC "
 "address) of the client computers to be installed. If you don't know this "
-"information, you can <phrase arch=\"sparc\"> pick it off the initial "
-"OpenPROM boot messages, use the OpenBoot <userinput>.enet-addr</userinput> "
-"command, or </phrase> boot into <quote>Rescue</quote> mode and use the "
+"information, you can boot into <quote>Rescue</quote> mode and use the "
 "command <userinput>ip addr show dev eth0</userinput>."
 msgstr ""
 "A RARP beállításához tudnod kell a telepíteni kívánt kliens Ethernet címét "
@@ -1384,7 +1162,7 @@ msgstr ""
 "használhatod a <userinput>ip addr show dev eth0</userinput> parancsot."
 
 #. Tag: para
-#: install-methods.xml:989
+#: install-methods.xml:903
 #, no-c-format
 msgid ""
 "On a RARP server system using a Linux kernel or Solaris/SunOS, you use the "
@@ -1408,13 +1186,13 @@ msgstr ""
 "userinput> a SunOS 4 rendszeren (Solaris 1)."
 
 #. Tag: title
-#: install-methods.xml:1010
+#: install-methods.xml:924
 #, no-c-format
 msgid "Setting up a DHCP server"
 msgstr "Egy DHCP kiszolgáló beállítása"
 
 #. Tag: para
-#: install-methods.xml:1011
+#: install-methods.xml:925
 #, no-c-format
 msgid ""
 "One free software DHCP server is ISC <command>dhcpd</command>. For &debian-"
@@ -1427,7 +1205,7 @@ msgstr ""
 "példa beállító fájl (lásd: <filename>/etc/dhcp/dhcpd.conf</filename>):"
 
 #. Tag: screen
-#: install-methods.xml:1018
+#: install-methods.xml:932
 #, no-c-format
 msgid ""
 "option domain-name \"example.com\";\n"
@@ -1471,7 +1249,7 @@ msgstr ""
 "}"
 
 #. Tag: para
-#: install-methods.xml:1020
+#: install-methods.xml:934
 #, no-c-format
 msgid ""
 "In this example, there is one server <replaceable>servername</replaceable> "
@@ -1488,7 +1266,7 @@ msgstr ""
 "neve."
 
 #. Tag: para
-#: install-methods.xml:1030
+#: install-methods.xml:944
 #, no-c-format
 msgid ""
 "After you have edited the <command>dhcpd</command> configuration file, "
@@ -1498,13 +1276,13 @@ msgstr ""
 "így: <userinput>/etc/init.d/isc-dhcp-server restart</userinput>."
 
 #. Tag: title
-#: install-methods.xml:1038
+#: install-methods.xml:952
 #, no-c-format
 msgid "Enabling PXE Booting in the DHCP configuration"
 msgstr "PXE indítás bekapcsolása a DHCP beállításban"
 
 #. Tag: para
-#: install-methods.xml:1039
+#: install-methods.xml:953
 #, no-c-format
 msgid ""
 "Here is another example for a <filename>dhcp.conf</filename> using the Pre-"
@@ -1574,7 +1352,7 @@ msgstr ""
 "alábbi <xref linkend=\"tftp-images\"/> részt)."
 
 #. Tag: para
-#: install-methods.xml:1049
+#: install-methods.xml:963
 #, no-c-format
 msgid ""
 "If your machine uses UEFI to boot, you will have to specify a boot loader "
@@ -1582,7 +1360,7 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: install-methods.xml:1053
+#: install-methods.xml:967
 #, no-c-format
 msgid ""
 "group {\n"
@@ -1596,13 +1374,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:1066
+#: install-methods.xml:980
 #, no-c-format
 msgid "Setting up a BOOTP server"
 msgstr "BOOTP kiszolgáló beállítása"
 
 #. Tag: para
-#: install-methods.xml:1067
+#: install-methods.xml:981
 #, no-c-format
 msgid ""
 "There are two BOOTP servers available for GNU/Linux. The first is CMU "
@@ -1617,7 +1395,7 @@ msgstr ""
 "<classname>isc-dhcp-server</classname> csomagokban vannak."
 
 #. Tag: para
-#: install-methods.xml:1075
+#: install-methods.xml:989
 #, no-c-format
 msgid ""
 "To use CMU <command>bootpd</command>, you must first uncomment (or add) the "
@@ -1645,10 +1423,7 @@ msgid ""
 "</screen></informalexample> You will need to change at least the <quote>ha</"
 "quote> option, which specifies the hardware address of the client. The "
 "<quote>bf</quote> option specifies the file a client should retrieve via "
-"TFTP; see <xref linkend=\"tftp-images\"/> for more details. <phrase arch="
-"\"mips\"> On SGI machines you can just enter the command monitor and type "
-"<userinput>printenv</userinput>. The value of the <userinput>eaddr</"
-"userinput> variable is the machine's MAC address. </phrase>"
+"TFTP; see <xref linkend=\"tftp-images\"/> for more details."
 msgstr ""
 "A CMU <command>bootpd</command> használatához a <filename>/etc/inetd.conf</"
 "filename> megfelelő sora kell. A &debian-gnu; rendszeren így érdemes: "
@@ -1674,12 +1449,10 @@ msgstr ""
 "</screen></informalexample> Legalább a <quote>ha</quote> opciót cserélni "
 "kell, mely megadja az ügyfél hardver címét. A <quote>bf</quote> lehetőség "
 "megadja az ügyfél által a TFTP-n elérendő fájlt; lásd ezt: <xref linkend="
-"\"tftp-images\"/> több részletért. <phrase arch=\"mips\"> SGI gépeken lépj "
-"be a parancs monitorba és írd be ezt: <userinput>printenv</userinput>. Az "
-"<userinput>eaddr</userinput> változó értéke a gép MAC címe. </phrase>"
+"\"tftp-images\"/> több részletért."
 
 #. Tag: para
-#: install-methods.xml:1108
+#: install-methods.xml:1016
 #, fuzzy, no-c-format
 #| msgid ""
 #| "By contrast, setting up BOOTP with ISC <command>dhcpd</command> is really "
@@ -1712,13 +1485,13 @@ msgstr ""
 "etc/init.d/isc-dhcp-server restart</userinput>."
 
 #. Tag: title
-#: install-methods.xml:1127
+#: install-methods.xml:1035
 #, no-c-format
 msgid "Enabling the TFTP Server"
 msgstr "TFTP kiszolgáló bekapcsolása"
 
 #. Tag: para
-#: install-methods.xml:1128
+#: install-methods.xml:1036
 #, no-c-format
 msgid ""
 "To get the TFTP server ready to go, you should first make sure that "
@@ -1726,7 +1499,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1133
+#: install-methods.xml:1041
 #, no-c-format
 msgid ""
 "In the case of <classname>tftpd-hpa</classname> there are two ways the "
@@ -1737,7 +1510,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1142
+#: install-methods.xml:1050
 #, no-c-format
 msgid ""
 "Historically, TFTP servers used <filename>/tftpboot</filename> as directory "
@@ -1755,7 +1528,7 @@ msgstr ""
 "szakaszban adott beállító példákat így."
 
 #. Tag: para
-#: install-methods.xml:1152
+#: install-methods.xml:1060
 #, no-c-format
 msgid ""
 "All <command>in.tftpd</command> alternatives available in &debian; should "
@@ -1765,32 +1538,14 @@ msgid ""
 "starting point for diagnosing the cause of errors."
 msgstr ""
 
-#. Tag: para
-#: install-methods.xml:1160
-#, no-c-format
-msgid ""
-"If you intend to install &debian; on an SGI machine and your TFTP server is "
-"a GNU/Linux box running Linux 2.4, you'll need to set the following on your "
-"server: <informalexample><screen>\n"
-"# echo 1 &gt; /proc/sys/net/ipv4/ip_no_pmtu_disc\n"
-"</screen></informalexample> to turn off Path MTU discovery, otherwise the "
-"SGI's PROM can't download the kernel. Furthermore, make sure TFTP packets "
-"are sent from a source port no greater than 32767, or the download will "
-"stall after the first packet. Again, it's Linux 2.4.X tripping this bug in "
-"the PROM, and you can avoid it by setting <informalexample><screen>\n"
-"# echo \"2048 32767\" &gt; /proc/sys/net/ipv4/ip_local_port_range\n"
-"</screen></informalexample> to adjust the range of source ports the Linux "
-"TFTP server uses."
-msgstr ""
-
 #. Tag: title
-#: install-methods.xml:1182
+#: install-methods.xml:1072
 #, no-c-format
 msgid "Move TFTP Images Into Place"
 msgstr "TFTP képek helyükre tétele"
 
 #. Tag: para
-#: install-methods.xml:1183
+#: install-methods.xml:1073
 #, no-c-format
 msgid ""
 "Next, place the TFTP boot image you need, as found in <xref linkend=\"where-"
@@ -1806,48 +1561,7 @@ msgstr ""
 "erre nincs erős szabvány."
 
 #. Tag: para
-#: install-methods.xml:1192
-#, no-c-format
-msgid ""
-"On NewWorld Power Macintosh machines, you will need to set up the "
-"<command>yaboot</command> boot loader as the TFTP boot image. "
-"<command>Yaboot</command> will then retrieve the kernel and RAMdisk images "
-"via TFTP itself. You will need to download the following files from the "
-"<filename>netboot/</filename> directory:"
-msgstr ""
-
-#. Tag: filename
-#: install-methods.xml:1203
-#, no-c-format
-msgid "vmlinux"
-msgstr "vmlinux"
-
-#. Tag: filename
-#: install-methods.xml:1208
-#, no-c-format
-msgid "initrd.gz"
-msgstr "initrd.gz"
-
-#. Tag: filename
-#: install-methods.xml:1213
-#, no-c-format
-msgid "yaboot"
-msgstr "yaboot"
-
-#. Tag: filename
-#: install-methods.xml:1218
-#, no-c-format
-msgid "yaboot.conf"
-msgstr "yaboot.conf"
-
-#. Tag: filename
-#: install-methods.xml:1223
-#, no-c-format
-msgid "boot.msg"
-msgstr "boot.msg"
-
-#. Tag: para
-#: install-methods.xml:1228
+#: install-methods.xml:1124
 #, fuzzy, no-c-format
 #| msgid ""
 #| "For PXE booting, everything you should need is set up in the "
@@ -1870,95 +1584,14 @@ msgstr ""
 "filename>-t adja át a <command>tftpd</command> számára, mint az indító fájl "
 "neve."
 
-#. Tag: para
-#: install-methods.xml:1238
-#, no-c-format
-msgid ""
-"For PXE booting, everything you should need is set up in the "
-"<filename>netboot/netboot.tar.gz</filename> tarball. Simply extract this "
-"tarball into the <command>tftpd</command> boot image directory. Make sure "
-"your dhcp server is configured to pass <filename>/debian-installer/ia64/"
-"elilo.efi</filename> to <command>tftpd</command> as the filename to boot."
-msgstr ""
-"A PXE indításhoz az egyetlen tennivaló a <filename>netboot/netboot.tar.gz</"
-"filename> beállítása. Egyszerűen bontsd ki a <command>tftpd</command> indító "
-"kép könyvtárba. Ellenőrizd, hogy a dhcp kiszolgáló a <filename>/debian-"
-"installer/ia64/elilo.efi</filename>-t adja át a <command>tftpd</command> "
-"számára, mint az indító fájl neve."
-
-#. Tag: title
-#: install-methods.xml:1250
-#, no-c-format
-msgid "SPARC TFTP Booting"
-msgstr ""
-
-#. Tag: para
-#: install-methods.xml:1251
-#, no-c-format
-msgid ""
-"Some SPARC architectures add the subarchitecture names, such as "
-"<quote>SUN4M</quote> or <quote>SUN4C</quote>, to the filename. Thus, if your "
-"system's subarchitecture is a SUN4C, and its IP is 192.168.1.3, the filename "
-"would be <filename>C0A80103.SUN4C</filename>. However, there are also "
-"subarchitectures where the file the client looks for is just "
-"<filename>client-ip-in-hex</filename>. An easy way to determine the "
-"hexadecimal code for the IP address is to enter the following command in a "
-"shell (assuming the machine's intended IP is 10.0.0.4). "
-"<informalexample><screen>\n"
-"$ printf '%.2x%.2x%.2x%.2x\\n' 10 0 0 4\n"
-"</screen></informalexample> To get to the correct filename, you will need to "
-"change all letters to uppercase and if necessary append the subarchitecture "
-"name."
-msgstr ""
-
-#. Tag: para
-#: install-methods.xml:1267
-#, no-c-format
-msgid ""
-"If you've done all this correctly, giving the command <userinput>boot net</"
-"userinput> from the OpenPROM should load the image. If the image cannot be "
-"found, try checking the logs on your tftp server to see which image name is "
-"being requested."
-msgstr ""
-
-#. Tag: para
-#: install-methods.xml:1274
-#, no-c-format
-msgid ""
-"You can also force some sparc systems to look for a specific file name by "
-"adding it to the end of the OpenPROM boot command, such as <userinput>boot "
-"net my-sparc.image</userinput>. This must still reside in the directory that "
-"the TFTP server looks in."
-msgstr ""
-
-#. Tag: title
-#: install-methods.xml:1285
-#, no-c-format
-msgid "SGI TFTP Booting"
-msgstr "SGI TFTP indítás"
-
-#. Tag: para
-#: install-methods.xml:1286
-#, no-c-format
-msgid ""
-"On SGI machines you can rely on the <command>bootpd</command> to supply the "
-"name of the TFTP file. It is given either as the <userinput>bf=</userinput> "
-"in <filename>/etc/bootptab</filename> or as the <userinput>filename=</"
-"userinput> option in <filename>/etc/dhcpd.conf</filename>."
-msgstr ""
-"SGI gépeken a <command>bootpd</command> nyújtja majd a TFTP fájl nevét. Ez "
-"megadható a <userinput>bf=</userinput> opcióval a <filename>/etc/bootptab</"
-"filename> vagy a <userinput>filename=</userinput> opcióval a <filename>/etc/"
-"dhcpd.conf</filename> fájlban."
-
 #. Tag: title
-#: install-methods.xml:1394
+#: install-methods.xml:1143
 #, no-c-format
 msgid "Automatic Installation"
 msgstr "Automata telepítés"
 
 #. Tag: para
-#: install-methods.xml:1395
+#: install-methods.xml:1144
 #, fuzzy, no-c-format
 #| msgid ""
 #| "For installing on multiple computers it's possible to do fully automatic "
@@ -1980,13 +1613,13 @@ msgstr ""
 "a &debian; Telepítő maga."
 
 #. Tag: title
-#: install-methods.xml:1407
+#: install-methods.xml:1156
 #, no-c-format
 msgid "Automatic Installation Using the &debian; Installer"
 msgstr "Automata telepítés a &debian; Telepítő használatával"
 
 #. Tag: para
-#: install-methods.xml:1408
+#: install-methods.xml:1157
 #, no-c-format
 msgid ""
 "The &debian; Installer supports automating installs via preconfiguration "
@@ -1999,7 +1632,7 @@ msgstr ""
 "tölthető le és a telepítő folyamat kérdéseinek megválaszolására használható."
 
 #. Tag: para
-#: install-methods.xml:1415
+#: install-methods.xml:1164
 #, no-c-format
 msgid ""
 "Full documentation on preseeding including a working example that you can "
@@ -2009,13 +1642,13 @@ msgstr ""
 "részben található."
 
 #. Tag: title
-#: install-methods.xml:1429
+#: install-methods.xml:1178
 #, no-c-format
 msgid "Verifying the integrity of installation files"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1431
+#: install-methods.xml:1180
 #, no-c-format
 msgid ""
 "You can verify the integrity of downloaded files against checksums provided "
@@ -2025,7 +1658,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1442
+#: install-methods.xml:1191
 #, no-c-format
 msgid ""
 "<ulink url=\"https://cdimage.debian.org/debian-cd/current/&architecture;/iso-"
@@ -2033,7 +1666,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1448
+#: install-methods.xml:1197
 #, no-c-format
 msgid ""
 "<ulink url=\"https://cdimage.debian.org/debian-cd/current/&architecture;/iso-"
@@ -2041,7 +1674,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1454
+#: install-methods.xml:1203
 #, no-c-format
 msgid ""
 "<ulink url=\"https://cdimage.debian.org/debian-cd/current/&architecture;/iso-"
@@ -2049,7 +1682,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1460
+#: install-methods.xml:1209
 #, no-c-format
 msgid ""
 "<ulink url=\"http://http.us.debian.org/debian/dists/&releasename;/main/"
@@ -2058,7 +1691,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1468
+#: install-methods.xml:1217
 #, no-c-format
 msgid ""
 "To compute the checksum of a downloaded installation file, use "
@@ -2072,7 +1705,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1481
+#: install-methods.xml:1230
 #, no-c-format
 msgid ""
 "The <ulink url=\"&url-debian-cd-faq;\">Debian CD FAQ</ulink> has <ulink url="
@@ -2083,6 +1716,133 @@ msgid ""
 "files themselves."
 msgstr ""
 
+#, fuzzy, no-c-format
+#~| msgid ""
+#~| "There is an all-in-one file <filename>hd-media/boot.img.gz</filename> "
+#~| "which contains all the installer files (including the kernel) as well as "
+#~| "<command>yaboot</command> and its configuration file. Create a partition "
+#~| "of type \"Apple_Bootstrap\" on your USB stick using <command>mac-fdisk</"
+#~| "command>'s <userinput>C</userinput> command and extract the image "
+#~| "directly to that:"
+#~ msgid ""
+#~ "Create a partition of type \"Apple_Bootstrap\" on your USB stick using "
+#~ "<command>mac-fdisk</command>'s <userinput>C</userinput> command and "
+#~ "extract the image directly to that:"
+#~ msgstr ""
+#~ "Van egy minden-egyben <filename>hd-media/boot.img.gz</filename> fájl, "
+#~ "benne az összes telepítő fájl (a kernel is), a <command>yaboot</command> "
+#~ "és beállító fájlja. Készíts egy \"Apple_Bootstrap\" partíciót az USB "
+#~ "táron a <command>mac-fdisk</command> <userinput>C</userinput> parancsával "
+#~ "és bontsd ki rá a képet így:"
+
+#, no-c-format
+#~ msgid "# zcat boot.img.gz &gt; /dev/<replaceable>sdX2</replaceable>"
+#~ msgstr "# zcat boot.img.gz &gt; /dev/<replaceable>sdX2</replaceable>"
+
+#, fuzzy, no-c-format
+#~| msgid "Booting the USB stick"
+#~ msgid "Partitioning the USB stick"
+#~ msgstr "Az USB tár indítása"
+
+#, fuzzy, no-c-format
+#~| msgid ""
+#~| "Since most USB sticks come pre-configured with a single FAT16 partition, "
+#~| "you probably won't have to repartition or reformat the stick. If you "
+#~| "have to do that anyway, use <command>cfdisk</command> or any other "
+#~| "partitioning tool to create a FAT16 partition, and then create the "
+#~| "filesystem using: <informalexample><screen>\n"
+#~| "# mkdosfs /dev/<replaceable>sda1</replaceable>\n"
+#~| "</screen></informalexample> Take care that you use the correct device "
+#~| "name for your USB stick. The <command>mkdosfs</command> command is "
+#~| "contained in the <classname>dosfstools</classname> Debian package."
+#~ msgid ""
+#~ "Most USB sticks do not come pre-configured in such a way that Open "
+#~ "Firmware can boot from them, so you will need to repartition the stick. "
+#~ "On Mac systems, run <userinput>mac-fdisk /dev/<replaceable>sdX</"
+#~ "replaceable></userinput>, initialise a new partition map using the "
+#~ "<userinput>i</userinput> command, and create a new partition of type "
+#~ "Apple_Bootstrap using the <userinput>C</userinput> command. (Note that "
+#~ "the first \"partition\" will always be the partition map itself.) Then "
+#~ "type <informalexample><screen>\n"
+#~ "$ hformat /dev/<replaceable>sdX2</replaceable>\n"
+#~ "</screen></informalexample> Take care that you use the correct device "
+#~ "name for your USB stick. The <command>hformat</command> command is "
+#~ "contained in the <classname>hfsutils</classname> &debian; package."
+#~ msgstr ""
+#~ "Mivel bármilyen furcsa a legtöbb USB memórián eleve egy FAT16 partíció "
+#~ "van, így nem biztos, hogy újra kell particionálnod, vagy formázni azt. Ha "
+#~ "viszont ezt szeretnéd, használd a <command>cfdisk</command> vagy bármely "
+#~ "más particionáló eszközt FAT16 partíció létrehozásához, majd hozd létre a "
+#~ "fájlrendszert így: <informalexample><screen>\n"
+#~ "# mkdosfs /dev/<replaceable>sda1</replaceable>\n"
+#~ "</screen></informalexample> Figyelj, hogy helyesen add meg az eszköz "
+#~ "nevét. Az <command>mkdosfs</command> a <classname>dosfstools</classname> "
+#~ "&debian; csomagban van."
+
+#, fuzzy, no-c-format
+#~| msgid "Adding an ISO image"
+#~ msgid "Adding the installer image"
+#~ msgstr "ISO kép hozzáadása"
+
+#, no-c-format
+#~ msgid ""
+#~ "Some older HPPA machines (e.g. 715/75) use RBOOTD rather than BOOTP. "
+#~ "There is an <classname>rbootd</classname> package available in &debian;."
+#~ msgstr ""
+#~ "Pár régibb HPPA gép (például a 715/75) RBOOTD-t használ BOOTP helyett. A "
+#~ "&debian; tartalmaz <classname>rbootd</classname> csomagot."
+
+#, no-c-format
+#~ msgid "vmlinux"
+#~ msgstr "vmlinux"
+
+#, no-c-format
+#~ msgid "initrd.gz"
+#~ msgstr "initrd.gz"
+
+#, no-c-format
+#~ msgid "yaboot"
+#~ msgstr "yaboot"
+
+#, no-c-format
+#~ msgid "yaboot.conf"
+#~ msgstr "yaboot.conf"
+
+#, no-c-format
+#~ msgid "boot.msg"
+#~ msgstr "boot.msg"
+
+#, no-c-format
+#~ msgid ""
+#~ "For PXE booting, everything you should need is set up in the "
+#~ "<filename>netboot/netboot.tar.gz</filename> tarball. Simply extract this "
+#~ "tarball into the <command>tftpd</command> boot image directory. Make sure "
+#~ "your dhcp server is configured to pass <filename>/debian-installer/ia64/"
+#~ "elilo.efi</filename> to <command>tftpd</command> as the filename to boot."
+#~ msgstr ""
+#~ "A PXE indításhoz az egyetlen tennivaló a <filename>netboot/netboot.tar."
+#~ "gz</filename> beállítása. Egyszerűen bontsd ki a <command>tftpd</command> "
+#~ "indító kép könyvtárba. Ellenőrizd, hogy a dhcp kiszolgáló a <filename>/"
+#~ "debian-installer/ia64/elilo.efi</filename>-t adja át a <command>tftpd</"
+#~ "command> számára, mint az indító fájl neve."
+
+#, no-c-format
+#~ msgid "SGI TFTP Booting"
+#~ msgstr "SGI TFTP indítás"
+
+#, no-c-format
+#~ msgid ""
+#~ "On SGI machines you can rely on the <command>bootpd</command> to supply "
+#~ "the name of the TFTP file. It is given either as the <userinput>bf=</"
+#~ "userinput> in <filename>/etc/bootptab</filename> or as the "
+#~ "<userinput>filename=</userinput> option in <filename>/etc/dhcpd.conf</"
+#~ "filename>."
+#~ msgstr ""
+#~ "SGI gépeken a <command>bootpd</command> nyújtja majd a TFTP fájl nevét. "
+#~ "Ez megadható a <userinput>bf=</userinput> opcióval a <filename>/etc/"
+#~ "bootptab</filename> vagy a <userinput>filename=</userinput> opcióval a "
+#~ "<filename>/etc/dhcpd.conf</filename> fájlban."
+
 #~ msgid ""
 #~ "# mount /dev/<replaceable>sdX2</replaceable> /mnt\n"
 #~ "# cd /mnt\n"