[SILENT_COMMIT] Update of POT and PO files for the installation-guide

2 files changed, 253 insertions, 217 deletions

diff --git a/po/da/hardware.po b/po/da/hardware.po
index 610b05158..f16d59507 100644
--- a/po/da/hardware.po
+++ b/po/da/hardware.po
@@ -16,7 +16,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual_hardware\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2021-08-12 18:27+0000\n"
+"POT-Creation-Date: 2021-08-15 23:02+0000\n"
 "PO-Revision-Date: 2021-06-07 19:32+0000\n"
 "Last-Translator: Joe Hansen <joedalton2@yahoo.dk>\n"
 "Language-Team: Danish <debian-l10n-danish@lists.debian.org>\n"
@@ -2490,7 +2490,16 @@ msgstr "Understøttelse af grafikudstyr"
 
 #. Tag: para
 #: hardware.xml:1627
-#, no-c-format
+#, fuzzy, no-c-format
+#| msgid ""
+#| "&debian;'s support for graphical interfaces is determined by the "
+#| "underlying support found in X.Org's X11 system, and the kernel. Basic "
+#| "framebuffer graphics is provided by the kernel, whilst desktop "
+#| "environments use X11. Whether advanced graphics card features such as 3D-"
+#| "hardware acceleration or hardware-accelerated video are available, "
+#| "depends on the actual graphics hardware used in the system and in some "
+#| "cases on the installation of additional <quote>firmware</quote> images "
+#| "(see <xref linkend=\"hardware-firmware\"/>)."
 msgid ""
 "&debian;'s support for graphical interfaces is determined by the underlying "
 "support found in X.Org's X11 system, and the kernel. Basic framebuffer "
@@ -2498,7 +2507,7 @@ msgid ""
 "Whether advanced graphics card features such as 3D-hardware acceleration or "
 "hardware-accelerated video are available, depends on the actual graphics "
 "hardware used in the system and in some cases on the installation of "
-"additional <quote>firmware</quote> images (see <xref linkend=\"hardware-"
+"additional <quote>firmware</quote> blobs (see <xref linkend=\"hardware-"
 "firmware\"/>)."
 msgstr ""
 "&debian;s understøttelse for grafiske grænseflader bestemmes af den "
@@ -2514,22 +2523,16 @@ msgstr ""
 #: hardware.xml:1639
 #, no-c-format
 msgid ""
-"On modern PCs, having a graphical display usually works out of the box. In "
-"very few cases there have been reports about hardware on which installation "
+"On modern PCs, having a graphical display usually works out of the box. For "
+"quite a lot of hardware, 3D acceleration also works well out of the box, but "
+"there is still some hardware that needs binary firmware blobs to work well. "
+"In some cases there have been reports about hardware on which installation "
 "of additional graphics card firmware was required even for basic graphics "
-"support, but these have been rare exceptions. For quite a lot of hardware, "
-"3D acceleration also works well out of the box, but there is still some "
-"hardware that needs binary blobs to work well."
+"support."
 msgstr ""
-"På moderne pc'er fungerer en grafisk skærm normalt uden videre. I nogle "
-"meget sjældne tilfælde har der været rapporter om udstyr hvor installation "
-"af yderligere grafikkortfirmware var krævet for selv grundlæggende "
-"grafikunderstøttelse, men det er sjældne undtagelser. For det meste udstyr "
-"fungerer også 3D-acceleration uden videre, men der er stadig noget udstyr "
-"som kræver binære blob'er for at fungere godt."
 
 #. Tag: para
-#: hardware.xml:1650
+#: hardware.xml:1649
 #, no-c-format
 msgid ""
 "Nearly all ARM machines have the graphics hardware built-in, rather than "
@@ -2554,7 +2557,7 @@ msgstr ""
 "udgivelsen. Andet udstyr kræver proprietære drivere fra tredjeparter."
 
 #. Tag: para
-#: hardware.xml:1664
+#: hardware.xml:1663
 #, no-c-format
 msgid ""
 "Details on supported graphics hardware and pointing devices can be found at "
@@ -2566,7 +2569,7 @@ msgstr ""
 "&x11ver;."
 
 #. Tag: para
-#: hardware.xml:1669
+#: hardware.xml:1668
 #, no-c-format
 msgid ""
 "Most graphics options commonly found on Sparc-based machines are supported. "
@@ -2586,7 +2589,7 @@ msgstr ""
 "dokumentationen inkluderet med den om hvordan kortet aktiveres."
 
 #. Tag: para
-#: hardware.xml:1679
+#: hardware.xml:1678
 #, no-c-format
 msgid ""
 "It is not uncommon for a Sparc machine to have two graphics cards in a "
@@ -2613,13 +2616,13 @@ msgstr ""
 "automatisk ved at frakoble tastaturet før opstart af systemet."
 
 #. Tag: title
-#: hardware.xml:1701
+#: hardware.xml:1700
 #, no-c-format
 msgid "Network Connectivity Hardware"
 msgstr "Udstry for netværksforbindelse"
 
 #. Tag: para
-#: hardware.xml:1702
+#: hardware.xml:1701
 #, no-c-format
 msgid ""
 "Almost any network interface card (NIC) supported by the &arch-kernel; "
@@ -2635,7 +2638,7 @@ msgstr ""
 "arch=\"i386\">Mange ældre ISA-kort er også understøttet.</phrase>"
 
 #. Tag: para
-#: hardware.xml:1712
+#: hardware.xml:1711
 #, no-c-format
 msgid ""
 "This includes a lot of generic PCI cards (for systems that have PCI) and the "
@@ -2645,61 +2648,61 @@ msgstr ""
 "de følgende NIC'er fra Sun:"
 
 #. Tag: para
-#: hardware.xml:1718
+#: hardware.xml:1717
 #, no-c-format
 msgid "Sun LANCE"
 msgstr "Sun LANCE"
 
 #. Tag: para
-#: hardware.xml:1723
+#: hardware.xml:1722
 #, no-c-format
 msgid "Sun Happy Meal"
 msgstr "Sun Happy Meal"
 
 #. Tag: para
-#: hardware.xml:1728
+#: hardware.xml:1727
 #, no-c-format
 msgid "Sun BigMAC"
 msgstr "Sun BigMAC"
 
 #. Tag: para
-#: hardware.xml:1733
+#: hardware.xml:1732
 #, no-c-format
 msgid "Sun QuadEthernet"
 msgstr "Sun QuadEthernet"
 
 #. Tag: para
-#: hardware.xml:1738
+#: hardware.xml:1737
 #, no-c-format
 msgid "MyriCOM Gigabit Ethernet"
 msgstr "MyriCOM Gigabit Ethernet"
 
 #. Tag: para
-#: hardware.xml:1745
+#: hardware.xml:1744
 #, no-c-format
 msgid "The list of supported network devices is:"
 msgstr "Listen over understøttede netværksenheder er:"
 
 #. Tag: para
-#: hardware.xml:1750
+#: hardware.xml:1749
 #, no-c-format
 msgid "Channel to Channel (CTC) and ESCON connection (real or emulated)"
 msgstr "Channel to Channel (CTC) og ESCON connection (reel eller emuleret)"
 
 #. Tag: para
-#: hardware.xml:1755
+#: hardware.xml:1754
 #, no-c-format
 msgid "OSA-2 Token Ring/Ethernet and OSA-Express Fast Ethernet (non-QDIO)"
 msgstr "OSA-2 Token Ring/Ethernet og OSA-Express Fast Ethernet (ikke-QDIO)"
 
 #. Tag: para
-#: hardware.xml:1760
+#: hardware.xml:1759
 #, no-c-format
 msgid "OSA-Express in QDIO mode, HiperSockets and Guest-LANs"
 msgstr "OSA-Express i QDIO-tilstand, HiperSockets og Guest-LAN'er"
 
 #. Tag: para
-#: hardware.xml:1769
+#: hardware.xml:1768
 #, no-c-format
 msgid ""
 "On &arch-title;, most built-in Ethernet devices are supported and modules "
@@ -2709,19 +2712,19 @@ msgstr ""
 "moduler for yderligere PCI- og USB-enheder tilbydes."
 
 #. Tag: para
-#: hardware.xml:1774
+#: hardware.xml:1773
 #, no-c-format
 msgid "ISDN is supported, but not during the installation."
 msgstr "ISDN er understøttet, men ikke under installationen."
 
 #. Tag: title
-#: hardware.xml:1781
+#: hardware.xml:1780
 #, no-c-format
 msgid "Wireless Network Cards"
 msgstr "Trådløse netværkskort"
 
 #. Tag: para
-#: hardware.xml:1782
+#: hardware.xml:1781
 #, no-c-format
 msgid ""
 "Wireless networking is in general supported as well and a growing number of "
@@ -2733,7 +2736,7 @@ msgstr ""
 "af dem ikke kræver firmware for at blive indlæst."
 
 #. Tag: para
-#: hardware.xml:1789
+#: hardware.xml:1788
 #, no-c-format
 msgid ""
 "If firmware is needed, the installer will prompt you to load firmware. See "
@@ -2745,7 +2748,7 @@ msgstr ""
 "information om hvordan firmware skal indlæses under installationen."
 
 #. Tag: para
-#: hardware.xml:1794
+#: hardware.xml:1793
 #, no-c-format
 msgid ""
 "Wireless NICs that are not supported by the official &arch-kernel; kernel "
@@ -2757,7 +2760,7 @@ msgstr ""
 "understøttet under installationen."
 
 #. Tag: para
-#: hardware.xml:1799
+#: hardware.xml:1798
 #, no-c-format
 msgid ""
 "If there is a problem with wireless and there is no other NIC you can use "
@@ -2776,7 +2779,7 @@ msgstr ""
 "manuelt."
 
 #. Tag: para
-#: hardware.xml:1809
+#: hardware.xml:1808
 #, no-c-format
 msgid ""
 "In some cases the driver you need may not be available as a &debian; "
@@ -2794,13 +2797,13 @@ msgstr ""
 "classname>, hvor du kan bruge en Windows-driver.</phrase>"
 
 #. Tag: title
-#: hardware.xml:1823
+#: hardware.xml:1822
 #, no-c-format
 msgid "Known Issues for &arch-title;"
 msgstr "Kendte problemstillinger for &arch-title;"
 
 #. Tag: para
-#: hardware.xml:1824
+#: hardware.xml:1823
 #, no-c-format
 msgid ""
 "There are a couple of issues with specific network cards that are worth "
@@ -2810,13 +2813,13 @@ msgstr ""
 "at nævne her."
 
 #. Tag: title
-#: hardware.xml:1831
+#: hardware.xml:1830
 #, no-c-format
 msgid "Conflict between tulip and dfme drivers"
 msgstr "Konflikt mellem tulip- og dfme-drivere"
 
 #. Tag: para
-#: hardware.xml:1833
+#: hardware.xml:1832
 #, no-c-format
 msgid ""
 "There are various PCI network cards that have the same PCI identification, "
@@ -2834,7 +2837,7 @@ msgstr ""
 "forkerte, fungerer NIC'en måske ikke, eller også fungerer den meget dårligt."
 
 #. Tag: para
-#: hardware.xml:1843
+#: hardware.xml:1842
 #, no-c-format
 msgid ""
 "This is a common problem on Netra systems with a Davicom (DEC-Tulip "
@@ -2849,7 +2852,7 @@ msgstr ""
 "blacklist\"/>."
 
 #. Tag: para
-#: hardware.xml:1851
+#: hardware.xml:1850
 #, no-c-format
 msgid ""
 "An alternative solution during the installation is to switch to a shell and "
@@ -2867,13 +2870,13 @@ msgstr ""
 "stadig kan indlæses når systemet genstartes."
 
 #. Tag: title
-#: hardware.xml:1864
+#: hardware.xml:1863
 #, no-c-format
 msgid "Sun B100 blade"
 msgstr "Sun B100 blade"
 
 #. Tag: para
-#: hardware.xml:1866
+#: hardware.xml:1865
 #, no-c-format
 msgid ""
 "The <literal>cassini</literal> network driver does not work with Sun B100 "
@@ -2883,13 +2886,13 @@ msgstr ""
 "systemer."
 
 #. Tag: title
-#: hardware.xml:1881
+#: hardware.xml:1880
 #, no-c-format
 msgid "Braille Displays"
 msgstr "Braille-skærme"
 
 #. Tag: para
-#: hardware.xml:1882
+#: hardware.xml:1881
 #, no-c-format
 msgid ""
 "Support for braille displays is determined by the underlying support found "
@@ -2908,13 +2911,13 @@ msgstr ""
 "classname> version &brlttyver;."
 
 #. Tag: title
-#: hardware.xml:1896
+#: hardware.xml:1895
 #, no-c-format
 msgid "Hardware Speech Synthesis"
 msgstr "Udstyr med talesyntese"
 
 #. Tag: para
-#: hardware.xml:1897
+#: hardware.xml:1896
 #, no-c-format
 msgid ""
 "Support for hardware speech synthesis devices is determined by the "
@@ -2936,13 +2939,13 @@ msgstr ""
 "<classname>speakup</classname> version &speakupver;."
 
 #. Tag: title
-#: hardware.xml:1917
+#: hardware.xml:1916
 #, no-c-format
 msgid "Peripherals and Other Hardware"
 msgstr "Ekstraudstyr"
 
 #. Tag: para
-#: hardware.xml:1918
+#: hardware.xml:1917
 #, no-c-format
 msgid ""
 "&arch-kernel; supports a large variety of hardware devices such as mice, "
@@ -2954,7 +2957,7 @@ msgstr ""
 "udstyr er dog ikke krævet under installation af systemet."
 
 #. Tag: para
-#: hardware.xml:1924
+#: hardware.xml:1923
 #, no-c-format
 msgid ""
 "USB hardware generally works fine. On some very old PC systems some USB "
@@ -2968,7 +2971,7 @@ msgstr ""
 "specfik konfiguration."
 
 #. Tag: para
-#: hardware.xml:1933
+#: hardware.xml:1932
 #, no-c-format
 msgid ""
 "Package installations from XPRAM and tape are not supported by this system. "
@@ -2980,13 +2983,13 @@ msgstr ""
 "eller over netværket via NFS, HTTP eller FTP."
 
 #. Tag: title
-#: hardware.xml:1946
+#: hardware.xml:1945
 #, no-c-format
 msgid "Devices Requiring Firmware"
 msgstr "Enheder som kræver firmware"
 
 #. Tag: para
-#: hardware.xml:1947
+#: hardware.xml:1946
 #, fuzzy, no-c-format
 #| msgid ""
 #| "Besides the availability of a device driver, some hardware also requires "
@@ -3016,7 +3019,7 @@ msgstr ""
 "firmware-fil installeres på systemet."
 
 #. Tag: para
-#: hardware.xml:1955
+#: hardware.xml:1954
 #, no-c-format
 msgid ""
 "With many graphics cards, basic functionality is available without "
@@ -3029,7 +3032,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:1966
+#: hardware.xml:1965
 #, no-c-format
 msgid ""
 "On many older devices which require firmware to work, the firmware file was "
@@ -3045,7 +3048,7 @@ msgstr ""
 "hver gang systemet starter op."
 
 #. Tag: para
-#: hardware.xml:1974
+#: hardware.xml:1973
 #, no-c-format
 msgid ""
 "In most cases firmware is non-free according to the criteria used by the "
@@ -3063,7 +3066,7 @@ msgstr ""
 "del af arkivet."
 
 #. Tag: para
-#: hardware.xml:1983
+#: hardware.xml:1982
 #, no-c-format
 msgid ""
 "However, this does not mean that such hardware cannot be used during an "
@@ -3081,7 +3084,7 @@ msgstr ""
 "installationen."
 
 #. Tag: para
-#: hardware.xml:1992
+#: hardware.xml:1991
 #, no-c-format
 msgid ""
 "If the &d-i; prompts for a firmware file and you do not have this firmware "
@@ -3101,13 +3104,13 @@ msgstr ""
 "driveren)."
 
 #. Tag: title
-#: hardware.xml:2009
+#: hardware.xml:2008
 #, no-c-format
 msgid "Purchasing Hardware Specifically for GNU/&arch-kernel;"
 msgstr "Køb af udstyr specifikt for GNU/&arch-kernel;"
 
 #. Tag: para
-#: hardware.xml:2011
+#: hardware.xml:2010
 #, no-c-format
 msgid ""
 "There are several vendors, who ship systems with &debian; or other "
@@ -3123,7 +3126,7 @@ msgstr ""
 "understøttet af GNU/Linux."
 
 #. Tag: para
-#: hardware.xml:2019
+#: hardware.xml:2018
 #, no-c-format
 msgid ""
 "If you do have to buy a machine with Windows bundled, carefully read the "
@@ -3139,7 +3142,7 @@ msgstr ""
 "at hjælpe med det."
 
 #. Tag: para
-#: hardware.xml:2027
+#: hardware.xml:2026
 #, no-c-format
 msgid ""
 "Whether or not you are purchasing a system with &arch-kernel; bundled, or "
@@ -3157,13 +3160,13 @@ msgstr ""
 "udstyrsleverandører."
 
 #. Tag: title
-#: hardware.xml:2038
+#: hardware.xml:2037
 #, no-c-format
 msgid "Avoid Proprietary or Closed Hardware"
 msgstr "Undgå proprietær eller lukket udstyr"
 
 #. Tag: para
-#: hardware.xml:2039
+#: hardware.xml:2038
 #, no-c-format
 msgid ""
 "Some hardware manufacturers simply won't tell us how to write drivers for "
@@ -3181,7 +3184,7 @@ msgstr ""
 "vil de ikke fungere under &arch-kernel;."
 
 #. Tag: para
-#: hardware.xml:2049
+#: hardware.xml:2048
 #, no-c-format
 msgid ""
 "In many cases there are standards (or at least some de-facto standards) "
@@ -3204,7 +3207,7 @@ msgstr ""
 "praktisk talt alle enheder solgt på markedet overholder standarderne."
 
 #. Tag: para
-#: hardware.xml:2061
+#: hardware.xml:2060
 #, no-c-format
 msgid ""
 "In other fields, among them e.g. printers, this is unfortunately not the "
@@ -3225,7 +3228,7 @@ msgstr ""
 "eller kun kan bruges med en leverandørdriver i lukket kildekode."
 
 #. Tag: para
-#: hardware.xml:2072
+#: hardware.xml:2071
 #, no-c-format
 msgid ""
 "Even if there is a vendor-provided closed-source driver for such hardware "
@@ -3252,7 +3255,7 @@ msgstr ""
 "det."
 
 #. Tag: para
-#: hardware.xml:2085
+#: hardware.xml:2084
 #, no-c-format
 msgid ""
 "You can help improve this situation by encouraging manufacturers of closed "
@@ -3264,13 +3267,13 @@ msgstr ""
 "for at vi kan tilbyde frie drivere til deres udstyr."
 
 #. Tag: title
-#: hardware.xml:2100
+#: hardware.xml:2099
 #, no-c-format
 msgid "Installation Media"
 msgstr "Installationsmedie"
 
 #. Tag: para
-#: hardware.xml:2102
+#: hardware.xml:2101
 #, no-c-format
 msgid ""
 "This section will help you determine which different media types you can use "
@@ -3286,13 +3289,13 @@ msgstr ""
 "det afsnit."
 
 #. Tag: title
-#: hardware.xml:2112
+#: hardware.xml:2111
 #, no-c-format
 msgid "CD-ROM/DVD-ROM/BD-ROM"
 msgstr "Cd-rom/dvd-rom/bd-rom"
 
 #. Tag: para
-#: hardware.xml:2114
+#: hardware.xml:2113
 #, fuzzy, no-c-format
 #| msgid "CD-ROM based installation is supported for most architectures."
 msgid "Installation from optical disc is supported for most architectures."
@@ -3300,7 +3303,7 @@ msgstr ""
 "Cd-rom-baseret installation er understøttet for de fleste arkitekturer."
 
 #. Tag: para
-#: hardware.xml:2118
+#: hardware.xml:2117
 #, fuzzy, no-c-format
 #| msgid ""
 #| "On PCs SATA, IDE/ATAPI, USB and SCSI CD-ROMs are supported, as are "
@@ -3313,13 +3316,13 @@ msgstr ""
 "FireWire-enheder som er understøttet af ohci1394- og sbp2-drivere."
 
 #. Tag: title
-#: hardware.xml:2135
+#: hardware.xml:2134
 #, no-c-format
 msgid "USB Memory Stick"
 msgstr "USB-hukommelsesdrev"
 
 #. Tag: para
-#: hardware.xml:2137
+#: hardware.xml:2136
 #, fuzzy, no-c-format
 #| msgid ""
 #| "USB flash disks a.k.a. USB memory sticks have become a commonly used and "
@@ -3343,13 +3346,13 @@ msgstr ""
 "standardmåden at installere et nyt operativsystem."
 
 #. Tag: title
-#: hardware.xml:2149
+#: hardware.xml:2148
 #, no-c-format
 msgid "Network"
 msgstr "Netværk"
 
 #. Tag: para
-#: hardware.xml:2151
+#: hardware.xml:2150
 #, no-c-format
 msgid ""
 "The network can be used during the installation to retrieve files needed for "
@@ -3369,7 +3372,7 @@ msgstr ""
 "konfigurere dit system til at bruge ISDN og PPP."
 
 #. Tag: para
-#: hardware.xml:2161
+#: hardware.xml:2160
 #, no-c-format
 msgid ""
 "You can also <emphasis>boot</emphasis> the installation system over the "
@@ -3391,7 +3394,7 @@ msgstr ""
 "foretrukne installationsteknik for &arch-title;.</phrase>"
 
 #. Tag: para
-#: hardware.xml:2174
+#: hardware.xml:2173
 #, no-c-format
 msgid ""
 "Diskless installation, using network booting from a local area network and "
@@ -3401,13 +3404,13 @@ msgstr ""
 "montering af alle lokale filsystemer, er en anden mulighed."
 
 #. Tag: title
-#: hardware.xml:2183
+#: hardware.xml:2182
 #, no-c-format
 msgid "Hard Disk"
 msgstr "Harddisk"
 
 #. Tag: para
-#: hardware.xml:2185
+#: hardware.xml:2184
 #, no-c-format
 msgid ""
 "Booting the installation system directly from a hard disk is another option "
@@ -3421,7 +3424,7 @@ msgstr ""
 "specielle tilfælde, hvor ingen anden installationsmetode er tilgængelig."
 
 #. Tag: para
-#: hardware.xml:2192
+#: hardware.xml:2191
 #, no-c-format
 msgid ""
 "Although the &arch-title; does not allow booting from SunOS (Solaris), you "
@@ -3431,13 +3434,13 @@ msgstr ""
 "installere fra en SunOS-partition (UFS-dias)."
 
 #. Tag: title
-#: hardware.xml:2201
+#: hardware.xml:2200
 #, no-c-format
 msgid "Un*x or GNU system"
 msgstr "Un*x eller GNU-system"
 
 #. Tag: para
-#: hardware.xml:2203
+#: hardware.xml:2202
 #, no-c-format
 msgid ""
 "If you are running another Unix-like system, you could use it to install "
@@ -3457,13 +3460,13 @@ msgstr ""
 "andre installationsmetoder er tilgængelige."
 
 #. Tag: title
-#: hardware.xml:2216
+#: hardware.xml:2215
 #, no-c-format
 msgid "Supported Storage Systems"
 msgstr "Understøttede lagersystemer"
 
 #. Tag: para
-#: hardware.xml:2218
+#: hardware.xml:2217
 #, no-c-format
 msgid ""
 "The &debian; installer contains a kernel which is built to maximize the "
@@ -3473,7 +3476,7 @@ msgstr ""
 "maksimere antallet af systemer det kan køre på."
 
 #. Tag: para
-#: hardware.xml:2222
+#: hardware.xml:2221
 #, no-c-format
 msgid ""
 "Generally, the &debian; installation system includes support for IDE (also "
@@ -3487,7 +3490,7 @@ msgstr ""
 "(VFAT) og NTFS."
 
 #. Tag: para
-#: hardware.xml:2239
+#: hardware.xml:2238
 #, no-c-format
 msgid ""
 "Any storage system supported by the Linux kernel is also supported by the "
@@ -3511,7 +3514,7 @@ msgstr ""
 "understøttet af Linux-kernen."
 
 #. Tag: para
-#: hardware.xml:2284
+#: hardware.xml:2283
 #, no-c-format
 msgid ""
 "Any storage system supported by the Linux kernel is also supported by the "
@@ -3521,7 +3524,7 @@ msgstr ""
 "opstartssystemet."
 
 #. Tag: para
-#: hardware.xml:2289
+#: hardware.xml:2288
 #, no-c-format
 msgid ""
 "Any storage system supported by the Linux kernel is also supported by the "
@@ -3533,13 +3536,13 @@ msgstr ""
 "det gamle Linux-disklayout (ldl) og det nye fælles S/390-disklayout (cdl)."
 
 #. Tag: title
-#: hardware.xml:2306
+#: hardware.xml:2305
 #, no-c-format
 msgid "Memory and Disk Space Requirements"
 msgstr "Hukommelses- og diskpladskrav"
 
 #. Tag: para
-#: hardware.xml:2308
+#: hardware.xml:2307
 #, no-c-format
 msgid ""
 "You must have at least &minimum-memory; of memory and &minimum-fs-size; of "
@@ -3553,7 +3556,7 @@ msgstr ""
 "\"minimum-hardware-reqts\"/>."
 
 #. Tag: para
-#: hardware.xml:2315
+#: hardware.xml:2314
 #, no-c-format
 msgid ""
 "The installer normally automatically enables memory-saving tricks to be able "
@@ -3565,7 +3568,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:2324
+#: hardware.xml:2323
 #, no-c-format
 msgid ""
 "On &architecture; the lowmem levels have not been tested, so automatic "
@@ -3574,7 +3577,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: hardware.xml:2330
+#: hardware.xml:2329
 #, no-c-format
 msgid ""
 "Installation on systems with less memory<footnote condition=\"gtk\"> <para> "
@@ -3594,6 +3597,21 @@ msgstr ""
 "vælges. </para> </footnote> eller diskplads kan lade sig gøre, men tilrådes "
 "kun for erfarne brugere."
 
+#~ msgid ""
+#~ "On modern PCs, having a graphical display usually works out of the box. "
+#~ "In very few cases there have been reports about hardware on which "
+#~ "installation of additional graphics card firmware was required even for "
+#~ "basic graphics support, but these have been rare exceptions. For quite a "
+#~ "lot of hardware, 3D acceleration also works well out of the box, but "
+#~ "there is still some hardware that needs binary blobs to work well."
+#~ msgstr ""
+#~ "På moderne pc'er fungerer en grafisk skærm normalt uden videre. I nogle "
+#~ "meget sjældne tilfælde har der været rapporter om udstyr hvor "
+#~ "installation af yderligere grafikkortfirmware var krævet for selv "
+#~ "grundlæggende grafikunderstøttelse, men det er sjældne undtagelser. For "
+#~ "det meste udstyr fungerer også 3D-acceleration uden videre, men der er "
+#~ "stadig noget udstyr som kræver binære blob'er for at fungere godt."
+
 #~ msgid "Platforms no longer supported by Debian/armhf"
 #~ msgstr "Platforme der ikke længere understøttes af Debian/armhf"
 
diff --git a/po/da/using-d-i.po b/po/da/using-d-i.po
index 8e6e8cc9a..e13d24dd1 100644
--- a/po/da/using-d-i.po
+++ b/po/da/using-d-i.po
@@ -17,7 +17,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: installation-guide using d-i\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2021-07-30 23:02+0000\n"
+"POT-Creation-Date: 2021-08-15 23:02+0000\n"
 "PO-Revision-Date: 2021-06-07 19:32+0000\n"
 "Last-Translator: Joe Hansen <joedalton2@yahoo.dk>\n"
 "Language-Team: Danish <debian-l10n-danish@lists.debian.org>\n"
@@ -4392,13 +4392,27 @@ msgstr ""
 
 #. Tag: para
 #: using-d-i.xml:2538
-#, no-c-format
+#, fuzzy, no-c-format
+#| msgid ""
+#| "These tasks loosely represent a number of different jobs or things you "
+#| "want to do with your computer, such as <quote>Desktop environment</"
+#| "quote>, <quote>Web server</quote>, or <quote>Print server</"
+#| "quote><footnote> <para> You should know that to present this list, the "
+#| "installer is merely invoking the <command>tasksel</command> program. It "
+#| "can be run at any time after installation to install more packages (or "
+#| "remove them), or you can use a more fine-grained tool such as "
+#| "<command>aptitude</command>. If you are looking for a specific single "
+#| "package, after installation is complete, simply run <userinput>aptitude "
+#| "install <replaceable>package</replaceable></userinput>, where "
+#| "<replaceable>package</replaceable> is the name of the package you are "
+#| "looking for. </para> </footnote>. <xref linkend=\"tasksel-size-list\"/> "
+#| "lists the space requirements for the available tasks."
 msgid ""
 "These tasks loosely represent a number of different jobs or things you want "
 "to do with your computer, such as <quote>Desktop environment</quote>, "
-"<quote>Web server</quote>, or <quote>Print server</quote><footnote> <para> "
-"You should know that to present this list, the installer is merely invoking "
-"the <command>tasksel</command> program. It can be run at any time after "
+"<quote>Web server</quote>, or <quote>SSH server</quote><footnote> <para> You "
+"should know that to present this list, the installer is merely invoking the "
+"<command>tasksel</command> program. It can be run at any time after "
 "installation to install more packages (or remove them), or you can use a "
 "more fine-grained tool such as <command>aptitude</command>. If you are "
 "looking for a specific single package, after installation is complete, "
@@ -4500,18 +4514,22 @@ msgstr ""
 
 #. Tag: para
 #: using-d-i.xml:2600
-#, no-c-format
+#, fuzzy, no-c-format
+#| msgid ""
+#| "The various server tasks will install software roughly as follows. Web "
+#| "server: <classname>apache2</classname>; Print server: <classname>cups</"
+#| "classname>; SSH server: <classname>openssh</classname>."
 msgid ""
 "The various server tasks will install software roughly as follows. Web "
-"server: <classname>apache2</classname>; Print server: <classname>cups</"
-"classname>; SSH server: <classname>openssh</classname>."
+"server: <classname>apache2</classname>; SSH server: <classname>openssh</"
+"classname>."
 msgstr ""
 "De forskellige serveropgaver vil installere programmer omtrentlig således. "
 "netserver: <classname>apache2</classname>; printerserver: <classname>cups</"
 "classname>; SSH-server: <classname>openssh</classname>."
 
 #. Tag: para
-#: using-d-i.xml:2607
+#: using-d-i.xml:2606
 #, no-c-format
 msgid ""
 "The <quote>Standard system</quote> task will install any package that has a "
@@ -4527,7 +4545,7 @@ msgstr ""
 "et virkeligt minimalt system."
 
 #. Tag: para
-#: using-d-i.xml:2615
+#: using-d-i.xml:2614
 #, no-c-format
 msgid ""
 "If during language selection a default locale other than the <quote>C</"
@@ -4547,7 +4565,7 @@ msgstr ""
 "også blive installeret (hvis tilgængelige)."
 
 #. Tag: para
-#: using-d-i.xml:2625
+#: using-d-i.xml:2624
 #, no-c-format
 msgid ""
 "Once you've selected your tasks, select &BTN-CONT;. At this point, "
@@ -4561,7 +4579,7 @@ msgstr ""
 "vil programmet spørge brugeren under denne proces."
 
 #. Tag: para
-#: using-d-i.xml:2632
+#: using-d-i.xml:2631
 #, no-c-format
 msgid ""
 "You should be aware that especially the Desktop task is very large. "
@@ -4579,7 +4597,7 @@ msgstr ""
 "afbryde installationen af pakker, når først den er startet."
 
 #. Tag: para
-#: using-d-i.xml:2641
+#: using-d-i.xml:2640
 #, no-c-format
 msgid ""
 "Even when packages are included on the CD-ROM, the installer may still "
@@ -4597,13 +4615,13 @@ msgstr ""
 "vil dette ske hvis du bruger et ældre aftryk."
 
 #. Tag: title
-#: using-d-i.xml:2656
+#: using-d-i.xml:2655
 #, no-c-format
 msgid "Making Your System Bootable"
 msgstr "Sikring af at dit system kan startes op"
 
 #. Tag: para
-#: using-d-i.xml:2658
+#: using-d-i.xml:2657
 #, no-c-format
 msgid ""
 "If you are installing a diskless workstation, obviously, booting off the "
@@ -4618,13 +4636,13 @@ msgstr ""
 "sun\"/>.</phrase>"
 
 #. Tag: title
-#: using-d-i.xml:2673
+#: using-d-i.xml:2672
 #, no-c-format
 msgid "Detecting other operating systems"
 msgstr "Detektering af andre operativsystemer"
 
 #. Tag: para
-#: using-d-i.xml:2675
+#: using-d-i.xml:2674
 #, no-c-format
 msgid ""
 "Before a boot loader is installed, the installer will attempt to probe for "
@@ -4640,7 +4658,7 @@ msgstr ""
 "konfigureret til at starte disse andre operativsystmer udover &debian;."
 
 #. Tag: para
-#: using-d-i.xml:2683
+#: using-d-i.xml:2682
 #, no-c-format
 msgid ""
 "Note that multiple operating systems booting on a single machine is still "
@@ -4657,13 +4675,13 @@ msgstr ""
 "information."
 
 #. Tag: title
-#: using-d-i.xml:2701
+#: using-d-i.xml:2700
 #, no-c-format
 msgid "<command>palo</command>-installer"
 msgstr "<command>palo</command>-installationsprogrammet"
 
 #. Tag: para
-#: using-d-i.xml:2702
+#: using-d-i.xml:2701
 #, no-c-format
 msgid ""
 "The bootloader on PA-RISC is <quote>palo</quote>. <command>PALO</command> is "
@@ -4679,20 +4697,20 @@ msgstr ""
 "Dette skyldes at <command>PALO</command> kan læse Linuxpartitioner."
 
 #. Tag: para
-#: using-d-i.xml:2711
+#: using-d-i.xml:2710
 #, no-c-format
 msgid "hppa FIXME ( need more info )"
 msgstr "hppa FIXME ( need more info )"
 
 #. Tag: title
-#: using-d-i.xml:2723
+#: using-d-i.xml:2722
 #, fuzzy, no-c-format
 #| msgid "Install the <command>Grub</command> Boot Loader on a Hard Disk"
 msgid "Install the <command>Grub</command> Boot Loader on the drive"
 msgstr "Installer opstartsindlæseren <command>Grub</command> på en harddisk"
 
 #. Tag: para
-#: using-d-i.xml:2725
+#: using-d-i.xml:2724
 #, fuzzy, no-c-format
 #| msgid ""
 #| "The main &architecture; boot loader is called <quote>grub</quote>. Grub "
@@ -4708,7 +4726,7 @@ msgstr ""
 "nye brugere og selvfølgelig også gamle brugere."
 
 #. Tag: para
-#: using-d-i.xml:2731
+#: using-d-i.xml:2730
 #, fuzzy, no-c-format
 #| msgid ""
 #| "By default, grub will be installed into the Master Boot Record (MBR), "
@@ -4726,7 +4744,7 @@ msgstr ""
 "du installere grub et andet sted. Se grubs manual for information."
 
 #. Tag: para
-#: using-d-i.xml:2738
+#: using-d-i.xml:2737
 #, no-c-format
 msgid ""
 "If you do not want to install grub, use the &BTN-GOBACK; button to get to "
@@ -4737,13 +4755,13 @@ msgstr ""
 "gå til hovedmenuen, og derfra vælges den opstartsindlæser du ønsker at bruge."
 
 #. Tag: title
-#: using-d-i.xml:2751
+#: using-d-i.xml:2750
 #, no-c-format
 msgid "Install the <command>ELILO</command> Boot Loader on a Hard Disk"
 msgstr "Installer opstartsindlæseren <command>ELILO</command> på harddisken"
 
 #. Tag: para
-#: using-d-i.xml:2753
+#: using-d-i.xml:2752
 #, no-c-format
 msgid ""
 "The &architecture; boot loader is called <quote>elilo</quote>. It is modeled "
@@ -4771,7 +4789,7 @@ msgstr ""
 "det faktiske arbejde med at indlæse og starte Linux-kernen."
 
 #. Tag: para
-#: using-d-i.xml:2769
+#: using-d-i.xml:2768
 #, no-c-format
 msgid ""
 "The <quote>elilo</quote> configuration and installation is done as the last "
@@ -4789,13 +4807,13 @@ msgstr ""
 "<emphasis>root</emphasis>-filsystem."
 
 #. Tag: title
-#: using-d-i.xml:2781
+#: using-d-i.xml:2780
 #, no-c-format
 msgid "Choose the correct partition!"
 msgstr "Vælg den korrekte partition!"
 
 #. Tag: para
-#: using-d-i.xml:2783
+#: using-d-i.xml:2782
 #, no-c-format
 msgid ""
 "The criterion for selecting a partition is that it must be a FAT format "
@@ -4813,13 +4831,13 @@ msgstr ""
 "partitionen under installationen, hvormed alt tidligere indhold slettes!"
 
 #. Tag: title
-#: using-d-i.xml:2798
+#: using-d-i.xml:2797
 #, no-c-format
 msgid "EFI Partition Contents"
 msgstr "EFI-partitionsindhold"
 
 #. Tag: para
-#: using-d-i.xml:2800
+#: using-d-i.xml:2799
 #, no-c-format
 msgid ""
 "The EFI partition is a FAT filesystem format partition on one of the hard "
@@ -4848,13 +4866,13 @@ msgstr ""
 "efterhånden som systemet opdateres eller konfigureres om."
 
 #. Tag: filename
-#: using-d-i.xml:2822
+#: using-d-i.xml:2821
 #, no-c-format
 msgid "elilo.conf"
 msgstr "elilo.conf"
 
 #. Tag: para
-#: using-d-i.xml:2823
+#: using-d-i.xml:2822
 #, no-c-format
 msgid ""
 "This is the configuration file read by the boot loader when it starts. It is "
@@ -4866,13 +4884,13 @@ msgstr ""
 "til at referere til filer i EFI-partitionen."
 
 #. Tag: filename
-#: using-d-i.xml:2832
+#: using-d-i.xml:2831
 #, no-c-format
 msgid "elilo.efi"
 msgstr "elilo.efi"
 
 #. Tag: para
-#: using-d-i.xml:2833
+#: using-d-i.xml:2832
 #, no-c-format
 msgid ""
 "This is the boot loader program that the <quote>EFI Boot Manager</quote> "
@@ -4885,13 +4903,13 @@ msgstr ""
 "GNU/Linux</guimenuitem> for kommandomenuen <quote>EFI Boot Manager</quote>."
 
 #. Tag: filename
-#: using-d-i.xml:2843
+#: using-d-i.xml:2842
 #, no-c-format
 msgid "initrd.img"
 msgstr "initrd.img"
 
 #. Tag: para
-#: using-d-i.xml:2844
+#: using-d-i.xml:2843
 #, no-c-format
 msgid ""
 "This is the initial root filesystem used to boot the kernel. It is a copy of "
@@ -4906,13 +4924,13 @@ msgstr ""
 "filename>."
 
 #. Tag: filename
-#: using-d-i.xml:2856
+#: using-d-i.xml:2855
 #, no-c-format
 msgid "readme.txt"
 msgstr "readme.txt"
 
 #. Tag: para
-#: using-d-i.xml:2857
+#: using-d-i.xml:2856
 #, no-c-format
 msgid ""
 "This is a small text file warning you that the contents of the directory are "
@@ -4924,13 +4942,13 @@ msgstr ""
 "tabt næste gang <filename>/usr/sbin/elilo</filename> køres."
 
 #. Tag: filename
-#: using-d-i.xml:2867
+#: using-d-i.xml:2866
 #, no-c-format
 msgid "vmlinuz"
 msgstr "vmlinuz"
 
 #. Tag: para
-#: using-d-i.xml:2868
+#: using-d-i.xml:2867
 #, no-c-format
 msgid ""
 "This is the compressed kernel itself. It is a copy of the file referenced in "
@@ -4944,13 +4962,13 @@ msgstr ""
 "henvisning <filename>/vmlinuz</filename>."
 
 #. Tag: title
-#: using-d-i.xml:2892
+#: using-d-i.xml:2891
 #, no-c-format
 msgid "Install <command>Yaboot</command> on a Hard Disk"
 msgstr "Installer <command>Yaboot</command> på en harddisk"
 
 #. Tag: para
-#: using-d-i.xml:2893
+#: using-d-i.xml:2892
 #, no-c-format
 msgid ""
 "Newer (mid 1998 and on) PowerMacs use <command>yaboot</command> as their "
@@ -4971,13 +4989,13 @@ msgstr ""
 "&debian-gnu; op."
 
 #. Tag: title
-#: using-d-i.xml:2911
+#: using-d-i.xml:2910
 #, no-c-format
 msgid "Install <command>Quik</command> on a Hard Disk"
 msgstr "Installer <command>Quik</command> på en harddisk"
 
 #. Tag: para
-#: using-d-i.xml:2912
+#: using-d-i.xml:2911
 #, no-c-format
 msgid ""
 "The boot loader for OldWorld Power Macintosh machines is <command>quik</"
@@ -4991,13 +5009,13 @@ msgstr ""
 "på 7200, 7300 og 7600 Powermacs, og på nogle Power Computing-kloner."
 
 #. Tag: title
-#: using-d-i.xml:2928
+#: using-d-i.xml:2927
 #, no-c-format
 msgid "Install the <command>Grub</command> Boot Loader on a Hard Disk"
 msgstr "Installer opstartsindlæseren <command>Grub</command> på en harddisk"
 
 #. Tag: para
-#: using-d-i.xml:2930
+#: using-d-i.xml:2929
 #, no-c-format
 msgid ""
 "The main &architecture; boot loader is called <quote>grub</quote>. Grub is a "
@@ -5009,7 +5027,7 @@ msgstr ""
 "nye brugere og selvfølgelig også gamle brugere."
 
 #. Tag: para
-#: using-d-i.xml:2936
+#: using-d-i.xml:2935
 #, no-c-format
 msgid ""
 "By default, Grub will be installed into the PReP partition, where it will "
@@ -5019,13 +5037,13 @@ msgstr ""
 "tage fuld kontrol over opstartsprocessen."
 
 #. Tag: title
-#: using-d-i.xml:2949
+#: using-d-i.xml:2948
 #, no-c-format
 msgid "<command>zipl</command>-installer"
 msgstr "<command>zipl</command>-installationsprogram"
 
 #. Tag: para
-#: using-d-i.xml:2950
+#: using-d-i.xml:2949
 #, no-c-format
 msgid ""
 "The boot loader on &arch-title; is <quote>zipl</quote>. <command>ZIPL</"
@@ -5042,13 +5060,13 @@ msgstr ""
 "command>."
 
 #. Tag: title
-#: using-d-i.xml:2967
+#: using-d-i.xml:2966
 #, no-c-format
 msgid "Install the <command>SILO</command> Boot Loader on a Hard Disk"
 msgstr "Installer opstartsindlæseren <command>SILO</command> på harddisken"
 
 #. Tag: para
-#: using-d-i.xml:2969
+#: using-d-i.xml:2968
 #, no-c-format
 msgid ""
 "The standard &architecture; boot loader is called <quote>silo</quote>. It is "
@@ -5079,13 +5097,13 @@ msgstr ""
 "installere GNU/Linux sammen med en eksisterende SunOS/Solaris-installation."
 
 #. Tag: title
-#: using-d-i.xml:2994
+#: using-d-i.xml:2993
 #, no-c-format
 msgid "Making the system bootable with flash-kernel"
 msgstr "Gør systemet opstartsbart med flash-kernel"
 
 #. Tag: para
-#: using-d-i.xml:2995
+#: using-d-i.xml:2994
 #, no-c-format
 msgid ""
 "As there is no common firmware interface on all ARM platforms, the steps "
@@ -5105,7 +5123,7 @@ msgstr ""
 "understøttet, og hvis ja, udføres de nødvendige operationer."
 
 #. Tag: para
-#: using-d-i.xml:3006
+#: using-d-i.xml:3005
 #, no-c-format
 msgid ""
 "On devices which boot from internal NOR- or NAND-flash memory, flash-kernel "
@@ -5123,7 +5141,7 @@ msgstr ""
 "overskriver normalt det tidligere indhold af flashhukommelsen!"
 
 #. Tag: para
-#: using-d-i.xml:3016
+#: using-d-i.xml:3015
 #, no-c-format
 msgid ""
 "For ARM systems that use U-Boot as their system firmware and boot the kernel "
@@ -5138,13 +5156,13 @@ msgstr ""
 "brugerinteraktion."
 
 #. Tag: title
-#: using-d-i.xml:3032
+#: using-d-i.xml:3031
 #, no-c-format
 msgid "Continue Without Boot Loader"
 msgstr "Fortsæt uden opstartsindlæser"
 
 #. Tag: para
-#: using-d-i.xml:3034
+#: using-d-i.xml:3033
 #, no-c-format
 msgid ""
 "This option can be used to complete the installation even when no boot "
@@ -5157,7 +5175,7 @@ msgstr ""
 "du vil bruge en eksisterende opstartsindlæser)."
 
 #. Tag: para
-#: using-d-i.xml:3041
+#: using-d-i.xml:3040
 #, no-c-format
 msgid ""
 "If you plan to manually configure your bootloader, you should check the name "
@@ -5180,13 +5198,13 @@ msgstr ""
 "filsystem."
 
 #. Tag: title
-#: using-d-i.xml:3058
+#: using-d-i.xml:3057
 #, no-c-format
 msgid "Finishing the Installation"
 msgstr "Afslutning af installationen"
 
 #. Tag: para
-#: using-d-i.xml:3059
+#: using-d-i.xml:3058
 #, no-c-format
 msgid ""
 "This is the last step in the &debian; installation process during which the "
@@ -5198,13 +5216,13 @@ msgstr ""
 "at rydde op efter &d-i;."
 
 #. Tag: title
-#: using-d-i.xml:3072
+#: using-d-i.xml:3071
 #, no-c-format
 msgid "Setting the System Clock"
 msgstr "Indstilling af systemuret"
 
 #. Tag: para
-#: using-d-i.xml:3074
+#: using-d-i.xml:3073
 #, no-c-format
 msgid ""
 "The installer may ask you if the computer's clock is set to UTC. Normally "
@@ -5218,7 +5236,7 @@ msgstr ""
 "operativsystemer som er installeret."
 
 #. Tag: para
-#: using-d-i.xml:3081
+#: using-d-i.xml:3080
 #, no-c-format
 msgid ""
 "In expert mode you will always be able to choose whether or not the clock is "
@@ -5236,7 +5254,7 @@ msgstr ""
 "lokal tid i stedet for UTC.</phrase>"
 
 #. Tag: para
-#: using-d-i.xml:3092
+#: using-d-i.xml:3091
 #, no-c-format
 msgid ""
 "At this point &d-i; will also attempt to save the current time to the "
@@ -5248,13 +5266,13 @@ msgstr ""
 "afhængig af valget du lige har foretaget."
 
 #. Tag: title
-#: using-d-i.xml:3107
+#: using-d-i.xml:3106
 #, no-c-format
 msgid "Reboot the System"
 msgstr "Genstart systemet"
 
 #. Tag: para
-#: using-d-i.xml:3109
+#: using-d-i.xml:3108
 #, fuzzy, no-c-format
 #| msgid ""
 #| "You will be prompted to remove the boot media (CD, floppy, etc) that you "
@@ -5270,7 +5288,7 @@ msgstr ""
 "systemet blive genstartet i dit nye &debian;-system."
 
 #. Tag: para
-#: using-d-i.xml:3115
+#: using-d-i.xml:3114
 #, no-c-format
 msgid ""
 "After a final prompt the system will be halted because rebooting is not "
@@ -5283,13 +5301,13 @@ msgstr ""
 "valgte for rodfilsystemet under de første trin af installationen."
 
 #. Tag: title
-#: using-d-i.xml:3128
+#: using-d-i.xml:3127
 #, no-c-format
 msgid "Troubleshooting"
 msgstr "Problemløsning"
 
 #. Tag: para
-#: using-d-i.xml:3129
+#: using-d-i.xml:3128
 #, no-c-format
 msgid ""
 "The components listed in this section are usually not involved in the "
@@ -5301,13 +5319,13 @@ msgstr ""
 "tilfælde af at noget går galt."
 
 #. Tag: title
-#: using-d-i.xml:3142
+#: using-d-i.xml:3141
 #, no-c-format
 msgid "Saving the installation logs"
 msgstr "Gemme installationsloggene"
 
 #. Tag: para
-#: using-d-i.xml:3144
+#: using-d-i.xml:3143
 #, no-c-format
 msgid ""
 "If the installation is successful, the logfiles created during the "
@@ -5319,7 +5337,7 @@ msgstr ""
 "nye &debian;-system."
 
 #. Tag: para
-#: using-d-i.xml:3151
+#: using-d-i.xml:3150
 #, fuzzy, no-c-format
 #| msgid ""
 #| "Choosing <guimenuitem>Save debug logs</guimenuitem> from the main menu "
@@ -5341,13 +5359,13 @@ msgstr ""
 "system eller vedhæfte dem til en installationsrapport."
 
 #. Tag: title
-#: using-d-i.xml:3171
+#: using-d-i.xml:3170
 #, no-c-format
 msgid "Using the Shell and Viewing the Logs"
 msgstr "Brug af skallen og visning af loggene"
 
 #. Tag: para
-#: using-d-i.xml:3173
+#: using-d-i.xml:3172
 #, no-c-format
 msgid ""
 "There are several methods you can use to get a shell while running an "
@@ -5373,14 +5391,14 @@ msgstr ""
 "keycombo> for at skifte tilbage til selve installationsprogrammet."
 
 #. Tag: para
-#: using-d-i.xml:3191
+#: using-d-i.xml:3190
 #, no-c-format
 msgid "For the graphical installer see also <xref linkend=\"gtk-using\"/>."
 msgstr ""
 "For det grafiske installationsprogram, se også <xref linkend=\"gtk-using\"/>."
 
 #. Tag: para
-#: using-d-i.xml:3195
+#: using-d-i.xml:3194
 #, no-c-format
 msgid ""
 "If you cannot switch consoles, there is also an <guimenuitem>Execute a "
@@ -5396,7 +5414,7 @@ msgstr ""
 "skallen og returnere til installationsprogrammet."
 
 #. Tag: para
-#: using-d-i.xml:3203
+#: using-d-i.xml:3202
 #, no-c-format
 msgid ""
 "At this point you are booted from the RAM disk, and there is a limited set "
@@ -5414,7 +5432,7 @@ msgstr ""
 "automatisk fuldførelse og historik."
 
 #. Tag: para
-#: using-d-i.xml:3212
+#: using-d-i.xml:3211
 #, no-c-format
 msgid ""
 "To edit and view files, use the text editor <command>nano</command>. Log "
@@ -5426,7 +5444,7 @@ msgstr ""
 "mappen <filename>/var/log</filename>."
 
 #. Tag: para
-#: using-d-i.xml:3219
+#: using-d-i.xml:3218
 #, no-c-format
 msgid ""
 "Although you can do basically anything in a shell that the available "
@@ -5439,7 +5457,7 @@ msgstr ""
 
 # engelsk fejl!!
 #. Tag: para
-#: using-d-i.xml:3225
+#: using-d-i.xml:3224
 #, no-c-format
 msgid ""
 "Doing things manually from the shell may interfere with the installation "
@@ -5453,13 +5471,13 @@ msgstr ""
 "din swappartition og ikke selv gøre dette fra en skal."
 
 #. Tag: title
-#: using-d-i.xml:3241
+#: using-d-i.xml:3240
 #, no-c-format
 msgid "Installation Over the Network"
 msgstr "Installation over netværket"
 
 #. Tag: para
-#: using-d-i.xml:3243
+#: using-d-i.xml:3242
 #, no-c-format
 msgid ""
 "One of the more interesting components is <firstterm>network-console</"
@@ -5477,7 +5495,7 @@ msgstr ""
 "\"automatic-install\"/>.)"
 
 #. Tag: para
-#: using-d-i.xml:3253
+#: using-d-i.xml:3252
 #, fuzzy, no-c-format
 #| msgid ""
 #| "This component is not loaded into the main installation menu by default, "
@@ -5508,7 +5526,7 @@ msgstr ""
 "<guimenuitem>Fortsæt installation eksternt med brug af SSH</guimenuitem>."
 
 #. Tag: para
-#: using-d-i.xml:3266
+#: using-d-i.xml:3265
 #, no-c-format
 msgid ""
 "For installations on &arch-title;, this is the default method after setting "
@@ -5518,7 +5536,7 @@ msgstr ""
 "opsætning af netværket."
 
 #. Tag: para
-#: using-d-i.xml:3271
+#: using-d-i.xml:3270
 #, no-c-format
 msgid ""
 "<phrase arch=\"not-s390\">After selecting this new entry, you</phrase> "
@@ -5540,7 +5558,7 @@ msgstr ""
 "fortsætte installationen eksternt."
 
 #. Tag: para
-#: using-d-i.xml:3283
+#: using-d-i.xml:3282
 #, no-c-format
 msgid ""
 "Should you decide to continue with the installation locally, you can always "
@@ -5552,7 +5570,7 @@ msgstr ""
 "vælge en anden komponent."
 
 #. Tag: para
-#: using-d-i.xml:3289
+#: using-d-i.xml:3288
 #, no-c-format
 msgid ""
 "Now let's switch to the other side of the wire. As a prerequisite, you need "
@@ -5584,7 +5602,7 @@ msgstr ""
 "du skal bekræfte, at det er korrekt."
 
 #. Tag: para
-#: using-d-i.xml:3306
+#: using-d-i.xml:3305
 #, no-c-format
 msgid ""
 "The <command>ssh</command> server in the installer uses a default "
@@ -5609,7 +5627,7 @@ msgstr ""
 "genoptage installationen efter ny tilslutning."
 
 #. Tag: para
-#: using-d-i.xml:3319
+#: using-d-i.xml:3318
 #, no-c-format
 msgid ""
 "You may be able to avoid the connection being dropped by adding the option "
@@ -5632,7 +5650,7 @@ msgstr ""
 "bruges når krævet."
 
 #. Tag: para
-#: using-d-i.xml:3332
+#: using-d-i.xml:3331
 #, no-c-format
 msgid ""
 "If you install several computers in turn and they happen to have the same IP "
@@ -5656,7 +5674,7 @@ msgstr ""
 "replaceable>&gt;</command>. </para> </footnote> og prøv igen."
 
 #. Tag: para
-#: using-d-i.xml:3348
+#: using-d-i.xml:3347
 #, no-c-format
 msgid ""
 "After the login you will be presented with an initial screen where you have "
@@ -5677,7 +5695,7 @@ msgstr ""
 "session for installationsmenuen, men kan starte flere sessioner for skaller."
 
 #. Tag: para
-#: using-d-i.xml:3358
+#: using-d-i.xml:3357
 #, no-c-format
 msgid ""
 "After you have started the installation remotely over SSH, you should not go "
@@ -5693,13 +5711,13 @@ msgstr ""
 "installerede system."
 
 #. Tag: title
-#: using-d-i.xml:3377
+#: using-d-i.xml:3376
 #, no-c-format
 msgid "Loading Missing Firmware"
 msgstr "Indlæsning af manglende firmware"
 
 #. Tag: para
-#: using-d-i.xml:3378
+#: using-d-i.xml:3377
 #, no-c-format
 msgid ""
 "As described in <xref linkend=\"hardware-firmware\"/>, some devices require "
@@ -5714,7 +5732,7 @@ msgstr ""
 "kun krævet for at aktivere yderligere funktioner."
 
 #. Tag: para
-#: using-d-i.xml:3386
+#: using-d-i.xml:3385
 #, no-c-format
 msgid ""
 "If a device driver requests firmware that is not available, &d-i; will "
@@ -5732,7 +5750,7 @@ msgstr ""
 "firmware</filename>) og drivermodulet vil blive genindlæst."
 
 #. Tag: para
-#: using-d-i.xml:3396
+#: using-d-i.xml:3395
 #, fuzzy, no-c-format
 #| msgid ""
 #| "Which devices are scanned and which file systems are supported depends on "
@@ -5757,7 +5775,7 @@ msgstr ""
 "kan firmware også indlæses fra et MMC- eller SD-kort.</phrase>"
 
 #. Tag: para
-#: using-d-i.xml:3406
+#: using-d-i.xml:3405
 #, no-c-format
 msgid ""
 "Note that it is possible to skip loading the firmware if you know the device "
@@ -5769,7 +5787,7 @@ msgstr ""
 "installationen."
 
 #. Tag: para
-#: using-d-i.xml:3412
+#: using-d-i.xml:3411
 #, no-c-format
 msgid ""
 "&d-i; only prompts for firmware needed by kernel modules loaded during the "
@@ -5792,13 +5810,13 @@ msgstr ""
 "quote>."
 
 #. Tag: title
-#: using-d-i.xml:3426
+#: using-d-i.xml:3425
 #, no-c-format
 msgid "Preparing a medium"
 msgstr "Forberedelse af et medie"
 
 #. Tag: para
-#: using-d-i.xml:3427
+#: using-d-i.xml:3426
 #, fuzzy, no-c-format
 #| msgid ""
 #| "Official CD images do not include non-free firmware. The most common "
@@ -5833,7 +5851,7 @@ msgstr ""
 "sandsynligt, at det understøttes i de tidlige stadier af installationen."
 
 #. Tag: para
-#: using-d-i.xml:3440
+#: using-d-i.xml:3439
 #, no-c-format
 msgid ""
 "Tarballs and zip files containing current packages for the most common "
@@ -5849,7 +5867,7 @@ msgstr ""
 "filsystemet på mediet."
 
 #. Tag: para
-#: using-d-i.xml:3454
+#: using-d-i.xml:3453
 #, no-c-format
 msgid ""
 "If the firmware you need is not included in the tarball, you can also "
@@ -5865,7 +5883,7 @@ msgstr ""
 "firmwarepakker:"
 
 #. Tag: para
-#: using-d-i.xml:3468
+#: using-d-i.xml:3467
 #, no-c-format
 msgid ""
 "It is also possible to copy individual firmware files to the medium. Loose "
@@ -5877,13 +5895,13 @@ msgstr ""
 "eller fra en udstyrsleverandør."
 
 #. Tag: title
-#: using-d-i.xml:3477
+#: using-d-i.xml:3476
 #, no-c-format
 msgid "Firmware and the Installed System"
 msgstr "Firmware og det installerede system"
 
 #. Tag: para
-#: using-d-i.xml:3478
+#: using-d-i.xml:3477
 #, no-c-format
 msgid ""
 "Any firmware loaded during the installation will be copied automatically to "
@@ -5901,7 +5919,7 @@ msgstr ""
 "firmwaren ikke kan indlæses på grund af forskellene i versionerne."
 
 #. Tag: para
-#: using-d-i.xml:3487
+#: using-d-i.xml:3486
 #, no-c-format
 msgid ""
 "If the firmware was loaded from a firmware package, &d-i; will also install "
@@ -5917,7 +5935,7 @@ msgstr ""
 "version bliver tilgængelig."
 
 #. Tag: para
-#: using-d-i.xml:3495
+#: using-d-i.xml:3494
 #, no-c-format
 msgid ""
 "If loading the firmware was skipped during the installation, the relevant "
@@ -5929,7 +5947,7 @@ msgstr ""
 "firmwaren (pakke) er installeret manuelt."
 
 #. Tag: para
-#: using-d-i.xml:3502
+#: using-d-i.xml:3501
 #, no-c-format
 msgid ""
 "If the firmware was loaded from loose firmware files, the firmware copied to "
@@ -5943,14 +5961,14 @@ msgstr ""
 "installeres efter installationen er færdig."
 
 #. Tag: title
-#: using-d-i.xml:3512
+#: using-d-i.xml:3511
 #, fuzzy, no-c-format
 #| msgid "Firmware and the Installed System"
 msgid "Completing the Installed System"
 msgstr "Firmware og det installerede system"
 
 #. Tag: para
-#: using-d-i.xml:3513
+#: using-d-i.xml:3512
 #, no-c-format
 msgid ""
 "Depending on how the installation was performed, it might be that the need "
@@ -5962,7 +5980,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3527
+#: using-d-i.xml:3526
 #, no-c-format
 msgid ""
 "Pass the <code>nomodeset</code> option on the kernel command line. This "
@@ -5970,7 +5988,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3531
+#: using-d-i.xml:3530
 #, no-c-format
 msgid ""
 "Use the <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F2</"
@@ -5979,7 +5997,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3537
+#: using-d-i.xml:3536
 #, no-c-format
 msgid ""
 "Once logged in into the installed system, it is possible to automate the "
@@ -5988,13 +6006,13 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3544
+#: using-d-i.xml:3543
 #, no-c-format
 msgid "Install the <classname>isenkram-cli</classname> package."
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3547
+#: using-d-i.xml:3546
 #, no-c-format
 msgid ""
 "Run the <command>isenkram-autoinstall-firmware</command> command as the "
@@ -6002,7 +6020,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3550
+#: using-d-i.xml:3549
 #, no-c-format
 msgid ""
 "Usually, rebooting is the simplest way to make sure all kernel modules are "
@@ -6011,7 +6029,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3557
+#: using-d-i.xml:3556
 #, no-c-format
 msgid ""
 "Installing firmware packages is very likely to require enabling the non-free "