Clean-up - sync translations, where possible

1 files changed, 466 insertions, 531 deletions

diff --git a/po/da/install-methods.po b/po/da/install-methods.po
index bb51bf753..a674fb212 100644
--- a/po/da/install-methods.po
+++ b/po/da/install-methods.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual_install-methods\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2021-10-27 23:02+0000\n"
+"POT-Creation-Date: 2022-05-19 22:02+0000\n"
 "PO-Revision-Date: 2021-06-07 19:32+0000\n"
 "Last-Translator: Joe Hansen <joedalton2@yahoo.dk>\n"
 "Language-Team: Danish <debian-l10n-danish@lists.debian.org>\n"
@@ -654,9 +654,7 @@ msgstr ""
 msgid ""
 "There is an all-in-one file &hdmedia-boot-img; which contains all the "
 "installer files (including the kernel)<phrase arch=\"x86\"> as well as "
-"<classname>syslinux</classname> and its configuration file</phrase><phrase "
-"arch=\"powerpc\"> as well as <classname>yaboot</classname> and its "
-"configuration file</phrase>."
+"<classname>syslinux</classname> and its configuration file</phrase>."
 msgstr ""
 "Der er en alt i en-fil &hdmedia-boot-img; som indeholder alle "
 "installationsprogrammets filre (inklusive the kernen) <phrase arch="
@@ -665,7 +663,7 @@ msgstr ""
 "konfigurationsfil</phrase>."
 
 #. Tag: para
-#: install-methods.xml:371
+#: install-methods.xml:369
 #, no-c-format
 msgid ""
 "Note that, although convenient, this method does have one major "
@@ -681,38 +679,20 @@ msgstr ""
 "ønsker at bruge den til andre formål."
 
 #. Tag: para
-#: install-methods.xml:379
+#: install-methods.xml:377
 #, fuzzy, no-c-format
 #| msgid "To use this image simply extract it directly to your USB stick:"
 msgid "Simply extract this image directly to your USB stick:"
 msgstr "For at bruge dette aftryk udtrækkes det direkte til dit USB-drev:"
 
 #. Tag: screen
-#: install-methods.xml:383
+#: install-methods.xml:381
 #, no-c-format
 msgid "# zcat boot.img.gz &gt; /dev/<replaceable>sdX</replaceable>"
 msgstr "# zcat boot.img.gz &gt; /dev/<replaceable>sdX</replaceable>"
 
 #. Tag: para
-#: install-methods.xml:385
-#, no-c-format
-msgid ""
-"Create a partition of type \"Apple_Bootstrap\" on your USB stick using "
-"<command>mac-fdisk</command>'s <userinput>C</userinput> command and extract "
-"the image directly to that:"
-msgstr ""
-"Opret en partition af typen »Apple_Bootstrap« på dit USB-drev via "
-"<command>mac-fdisk</command>s <userinput>C</userinput>-kommando og udtræk "
-"aftrykket direkte til denne:"
-
-#. Tag: screen
-#: install-methods.xml:391
-#, no-c-format
-msgid "# zcat boot.img.gz &gt; /dev/<replaceable>sdX2</replaceable>"
-msgstr "# zcat boot.img.gz &gt; /dev/<replaceable>sdX2</replaceable>"
-
-#. Tag: para
-#: install-methods.xml:393
+#: install-methods.xml:397
 #, fuzzy, no-c-format
 #| msgid ""
 #| "After that, mount the USB memory stick <phrase arch="
@@ -743,13 +723,13 @@ msgstr ""
 "og du er færdig."
 
 #. Tag: title
-#: install-methods.xml:411
+#: install-methods.xml:415
 #, no-c-format
 msgid "Manually copying files to the USB stick &mdash; the flexible way"
 msgstr "Manuelt kopiere filer til USB-drevet &mdash; den fleksible måde"
 
 #. Tag: para
-#: install-methods.xml:412
+#: install-methods.xml:416
 #, no-c-format
 msgid ""
 "If you like more flexibility or just want to know what's going on, you "
@@ -765,13 +745,13 @@ msgstr ""
 "endda et dvd-aftryk til drevet."
 
 #. Tag: title
-#: install-methods.xml:427
+#: install-methods.xml:431
 #, no-c-format
 msgid "Partitioning and adding a boot loader"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:428
+#: install-methods.xml:432
 #, no-c-format
 msgid ""
 "We will show how to set up the memory stick to use the first partition, "
@@ -781,7 +761,7 @@ msgstr ""
 "partition, i stedet for hele enheden."
 
 #. Tag: para
-#: install-methods.xml:433
+#: install-methods.xml:437
 #, fuzzy, no-c-format
 #| msgid ""
 #| "In order to start the kernel after booting from the USB stick, we will "
@@ -808,7 +788,7 @@ msgstr ""
 "konfigurationen af opstartsindlæseren."
 
 #. Tag: para
-#: install-methods.xml:443
+#: install-methods.xml:447
 #, no-c-format
 msgid ""
 "First, you need to install the <classname>syslinux</classname> and "
@@ -816,7 +796,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:448
+#: install-methods.xml:452
 #, fuzzy, no-c-format
 #| msgid ""
 #| "Since most USB sticks come pre-configured with a single FAT16 partition, "
@@ -864,7 +844,7 @@ msgstr ""
 "indeholdt i &debian;-pakken <classname>dosfstools</classname>."
 
 #. Tag: para
-#: install-methods.xml:471
+#: install-methods.xml:475
 #, fuzzy, no-c-format
 #| msgid ""
 #| "To put <classname>syslinux</classname> on the FAT16 partition on your USB "
@@ -899,14 +879,14 @@ msgstr ""
 "filename>, som indeholder koden for opstartsindlæseren."
 
 #. Tag: title
-#: install-methods.xml:487
+#: install-methods.xml:491
 #, fuzzy, no-c-format
 #| msgid "Adding the installer image"
 msgid "Adding the installer files"
 msgstr "Tilføjelse af installationsprogrammets aftryk"
 
 #. Tag: para
-#: install-methods.xml:488
+#: install-methods.xml:492
 #, no-c-format
 msgid ""
 "There are two different installation variants to choose here: The hd-media "
@@ -916,7 +896,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:495
+#: install-methods.xml:499
 #, fuzzy, no-c-format
 #| msgid ""
 #| "Mount the partition (<userinput>mount /dev/<replaceable>sdX1</"
@@ -953,7 +933,7 @@ msgstr ""
 "filnavne (8.3)."
 
 #. Tag: para
-#: install-methods.xml:519
+#: install-methods.xml:523
 #, fuzzy, no-c-format
 #| msgid ""
 #| "Mount the partition (<userinput>mount /dev/<replaceable>sdX2</"
@@ -968,7 +948,7 @@ msgstr ""
 "mnt</userinput>) og kopier de følgende installationsaftryksfiler til drevet:"
 
 #. Tag: para
-#: install-methods.xml:525
+#: install-methods.xml:529
 #, fuzzy, no-c-format
 #| msgid ""
 #| "Next you should create a <filename>syslinux.cfg</filename> configuration "
@@ -1000,7 +980,7 @@ msgstr ""
 "kan tilføjes som ønsket."
 
 #. Tag: para
-#: install-methods.xml:536
+#: install-methods.xml:540
 #, no-c-format
 msgid ""
 "For the graphical installer (from <filename>gtk</filename>) you should add "
@@ -1009,7 +989,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:542
+#: install-methods.xml:546
 #, no-c-format
 msgid ""
 "To enable the boot prompt to permit further parameter appending, add a "
@@ -1019,7 +999,7 @@ msgstr ""
 "parametertilføjelse, tilføjes en linje <userinput>prompt 1</userinput>."
 
 #. Tag: para
-#: install-methods.xml:547
+#: install-methods.xml:551
 #, no-c-format
 msgid ""
 "If you used files from <filename>hd-media</filename>, you should now copy "
@@ -1028,7 +1008,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:553
+#: install-methods.xml:557
 #, fuzzy, no-c-format
 #| msgid ""
 #| "If you used an <filename>hd-media</filename> image, you should now copy "
@@ -1053,7 +1033,7 @@ msgstr ""
 "(<userinput>umount /mnt</userinput>)."
 
 #. Tag: para
-#: install-methods.xml:560
+#: install-methods.xml:564
 #, no-c-format
 msgid ""
 "When you are done, unmount the USB memory stick (<userinput>umount /mnt</"
@@ -1061,195 +1041,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:573
-#, no-c-format
-msgid "Partitioning the USB stick"
-msgstr "Partitionering af USB-drevet"
-
-#. Tag: para
-#: install-methods.xml:574
-#, no-c-format
-msgid ""
-"Most USB sticks do not come pre-configured in such a way that Open Firmware "
-"can boot from them, so you will need to repartition the stick. On Mac "
-"systems, run <userinput>mac-fdisk /dev/<replaceable>sdX</replaceable></"
-"userinput>, initialise a new partition map using the <userinput>i</"
-"userinput> command, and create a new partition of type Apple_Bootstrap using "
-"the <userinput>C</userinput> command. (Note that the first \"partition\" "
-"will always be the partition map itself.) Then type "
-"<informalexample><screen>\n"
-"$ hformat /dev/<replaceable>sdX2</replaceable>\n"
-"</screen></informalexample> Take care that you use the correct device name "
-"for your USB stick. The <command>hformat</command> command is contained in "
-"the <classname>hfsutils</classname> &debian; package."
-msgstr ""
-"De fleste USB-drev er ikke prækonfigurerede på en sådan måde at Open "
-"Firmware kan starte op fra dem, så du skal partitionere drevet om. På Mac-"
-"systemer, kør <userinput>mac-fdisk /dev/<replaceable>sdX</replaceable></"
-"userinput>, initialiser et nyt partitionskort via kommandoen <userinput>i</"
-"userinput>, og opret en ny partition af typen Apple_Bootstrap via kommandoen "
-"<userinput>C</userinput>. (Bemærk at den første »partition« altid vil være "
-"selve partitionskortet). Tast så <informalexample><screen>\n"
-"$ hformat /dev/<replaceable>sdX2</replaceable>\n"
-"</screen></informalexample> Sikr dig, at du bruger det korrekte enhedsnavn "
-"på dit USB-drev. Kommandoen <command>hformat</command> er indeholdt i "
-"&debian;-pakken <classname>hfsutils</classname>."
-
-#. Tag: para
-#: install-methods.xml:591
-#, no-c-format
-msgid ""
-"In order to start the kernel after booting from the USB stick, we will put a "
-"boot loader on the stick. The <command>yaboot</command> boot loader can be "
-"installed on an HFS filesystem and can be reconfigured by just editing a "
-"text file. Any operating system which supports the HFS file system can be "
-"used to make changes to the configuration of the boot loader."
-msgstr ""
-"For at starte kernen efter opstart fra USB-drevet, vil vi placere en "
-"opstartsindlæser på drevet. Opstartsindlæseren <command>yaboot</command> kan "
-"installeres på et HFS-filsystem og kan konfigureres om ved bare at redigere "
-"en tekstfil. Alle operativsystemer som understøtter HFS-filsystemet kan "
-"bruges til at udføre ændringer til konfigurationen af opstartsindlæseren."
-
-#. Tag: para
-#: install-methods.xml:600
-#, no-c-format
-msgid ""
-"The normal <command>ybin</command> tool that comes with <command>yaboot</"
-"command> does not yet understand USB storage devices, so you will have to "
-"install <command>yaboot</command> by hand using the <classname>hfsutils</"
-"classname> tools. Type <informalexample><screen>\n"
-"$ hmount /dev/<replaceable>sdX2</replaceable>\n"
-"$ hcopy -r /usr/lib/yaboot/yaboot :\n"
-"$ hattrib -c UNIX -t tbxi :yaboot\n"
-"$ hattrib -b :\n"
-"$ humount\n"
-"</screen></informalexample> Again, take care that you use the correct device "
-"name. The partition must not be otherwise mounted during this procedure. "
-"This procedure writes the boot loader to the partition, and uses the HFS "
-"utilities to mark it in such a way that Open Firmware will boot it. Having "
-"done this, the rest of the USB stick may be prepared using the normal Unix "
-"utilities."
-msgstr ""
-"Det normale værktøj <command>ybin</command>, som følger med <command>yaboot</"
-"command> forstår endnu ikke USB-lagerenheder, så du skal installere "
-"<command>yaboot</command> manuelt via <classname>hfsutils</classname>-"
-"værktøjerne. Tast <informalexample><screen>\n"
-"$ hmount /dev/<replaceable>sdX2</replaceable>\n"
-"$ hcopy -r /usr/lib/yaboot/yaboot :\n"
-"$ hattrib -c UNIX -t tbxi :yaboot\n"
-"$ hattrib -b :\n"
-"$ humount\n"
-"</screen></informalexample> Sikr dig, at du bruger det korrekte enhedsnavn. "
-"Partitionen må ikke på anden vis monteres under denne procedure. Denne "
-"procedure skriver opstartsindlæseren til partitionen, og bruger HFS-"
-"redskaberne til at markere den på en måde så at Open Firmware vil starte den "
-"op. Når dette er gjort kan resten af USB-drevet forberedes med normale UNIX-"
-"redskaber."
-
-#. Tag: title
-#: install-methods.xml:620
-#, no-c-format
-msgid "Adding the installer image"
-msgstr "Tilføjelse af installationsprogrammets aftryk"
-
-#. Tag: para
-#: install-methods.xml:621
-#, no-c-format
-msgid ""
-"Mount the partition (<userinput>mount /dev/<replaceable>sdX2</replaceable> /"
-"mnt</userinput>) and copy the following installer image files to the stick:"
-msgstr ""
-"Monter partitionen (<userinput>mount /dev/<replaceable>sdX2</replaceable> /"
-"mnt</userinput>) og kopier de følgende installationsaftryksfiler til drevet:"
-
-#. Tag: para
-#: install-methods.xml:628
-#, no-c-format
-msgid "<filename>vmlinux</filename> (kernel binary)"
-msgstr "<filename>vmlinux</filename> (kernens binære fil)"
-
-#. Tag: para
-#: install-methods.xml:633
-#, no-c-format
-msgid "<filename>initrd.gz</filename> (initial ramdisk image)"
-msgstr "<filename>initrd.gz</filename> (oprindelig ramdisk-aftryk)"
-
-#. Tag: para
-#: install-methods.xml:638
-#, no-c-format
-msgid "<filename>yaboot.conf</filename> (yaboot configuration file)"
-msgstr "<filename>yaboot.conf</filename> (yaboot-konfigurationsfil)"
-
-#. Tag: para
-#: install-methods.xml:643
-#, no-c-format
-msgid "<filename>boot.msg</filename> (optional boot message)"
-msgstr "<filename>boot.msg</filename> (valgfri opstartsbesked)"
-
-#. Tag: para
-#: install-methods.xml:650
-#, no-c-format
-msgid ""
-"The <filename>yaboot.conf</filename> configuration file should contain the "
-"following lines: <informalexample><screen>\n"
-"default=install\n"
-"root=/dev/ram\n"
-"\n"
-"message=/boot.msg\n"
-"\n"
-"image=/vmlinux\n"
-"        label=install\n"
-"        initrd=/initrd.gz\n"
-"        initrd-size=10000\n"
-"        read-only\n"
-"</screen></informalexample> Please note that the <userinput>initrd-size</"
-"userinput> parameter may need to be increased, depending on the image you "
-"are booting."
-msgstr ""
-"Konfigurationsfilen <filename>yaboot.conf</filename> bør indeholder de "
-"følgende linjer: <informalexample><screen>\n"
-"default=install\n"
-"root=/dev/ram\n"
-"\n"
-"message=/boot.msg\n"
-"\n"
-"image=/vmlinux\n"
-"        label=install\n"
-"        initrd=/initrd.gz\n"
-"        initrd-size=10000\n"
-"        read-only\n"
-"</screen></informalexample> Bemærk venligst at parameteren <userinput>initrd-"
-"size</userinput> måske skal øges, afhængig af aftrykket du indlæser."
-
-#. Tag: para
-#: install-methods.xml:660
-#, no-c-format
-msgid ""
-"If you used an <filename>hd-media</filename> image, you should now copy the "
-"ISO file of a &debian; ISO image<footnote> <para> You can use either a "
-"netinst or a full CD image (see <xref linkend=\"official-cdrom\"/>). Be sure "
-"to select one that fits. Note that the <quote>netboot <filename>mini.iso</"
-"filename></quote> image is not usable for this purpose. </para> </footnote> "
-"onto the stick. When you are done, unmount the USB memory stick "
-"(<userinput>umount /mnt</userinput>)."
-msgstr ""
-"Hvis du anvendte et <filename>hd-media</filename>-aftryk, så bør du kopiere "
-"ISO-filen for et &debian;-ISO-aftryk<footnote> <para> Du kan bruge enten en "
-"netinst eller et fuld cd-aftryk (se <xref linkend=\"official-cdrom\"/>). Vær "
-"sikker på at vælge et som passer. Bemærk at <quote>netboot <filename>mini."
-"iso</filename></quote>-aftrykket ikke er brugbar til dette formål. </para> </"
-"footnote> ned på drevet. Når du er færdig, afmonter USB-drevet "
-"(<userinput>umount /mnt</userinput>)."
-
-#. Tag: title
-#: install-methods.xml:688
+#: install-methods.xml:694
 #, no-c-format
 msgid "Preparing Files for Hard Disk Booting"
 msgstr "Forberedelse af filer for harddiskopstart"
 
 #. Tag: para
-#: install-methods.xml:689
+#: install-methods.xml:695
 #, fuzzy, no-c-format
 #| msgid ""
 #| "The installer may be booted using boot files placed on an existing hard "
@@ -1267,7 +1065,7 @@ msgstr ""
 "eller ved at igangsætte en opstartsindlæser direkte fra BIOS'en."
 
 #. Tag: para
-#: install-methods.xml:697
+#: install-methods.xml:703
 #, fuzzy, no-c-format
 #| msgid ""
 #| "A full, <quote>pure network</quote> installation can be achieved using "
@@ -1283,42 +1081,8 @@ msgstr ""
 "Dette undgår alle problemerne forbundet med eksterne medier, såsom af finde "
 "og brænde cd-aftryk eller kæmpe med for mange og utroværdige disketter."
 
-#. Tag: para
-#: install-methods.xml:703
-#, no-c-format
-msgid ""
-"The installer cannot boot from files on an HFS+ file system. MacOS System "
-"8.1 and above may use HFS+ file systems; NewWorld PowerMacs all use HFS+. To "
-"determine whether your existing file system is HFS+, select <userinput>Get "
-"Info</userinput> for the volume in question. HFS file systems appear as "
-"<userinput>Mac OS Standard</userinput>, while HFS+ file systems say "
-"<userinput>Mac OS Extended</userinput>. You must have an HFS partition in "
-"order to exchange files between MacOS and Linux, in particular the "
-"installation files you download."
-msgstr ""
-"Installationsprogrammet kan ikke starte op fra filer på et HFS+-filsystem. "
-"MacOS System 8.1 og senere kan bruge HFS+-filsystemer; NewWorld PowerMacs "
-"bruger alle HFS+. For at bestemme om dit eksisterende filsystem er HFS+, "
-"vælges <userinput>Hent information</userinput> for diskenheden. HFS-"
-"filsystemet fremstår som <userinput>Mac OS Standard</userinput>, mens HFS+-"
-"filsystemet er <userinput>Mac OS Extended</userinput>. Du skal have en HFS-"
-"partition for at udtrække filer mellem MacOS og Linux, specielt "
-"installationsfilerne du hentede."
-
-#. Tag: para
-#: install-methods.xml:714
-#, no-c-format
-msgid ""
-"Different programs are used for hard disk installation system booting, "
-"depending on whether the system is a <quote>NewWorld</quote> or an "
-"<quote>OldWorld</quote> model."
-msgstr ""
-"Forskellige programmer bruges til systemopstart af installationen fra "
-"harddisk afhængig af om systemet er <quote>NewWorld</quote> eller "
-"<quote>OldWorld</quote>."
-
 #. Tag: title
-#: install-methods.xml:723
+#: install-methods.xml:733
 #, fuzzy, no-c-format
 #| msgid ""
 #| "Hard disk installer booting from DOS using <command>loadlin</command>"
@@ -1327,7 +1091,7 @@ msgstr ""
 "Harddiskinstallationen starter op fra DOS med <command>loadlin</command>"
 
 #. Tag: para
-#: install-methods.xml:725
+#: install-methods.xml:735
 #, fuzzy, no-c-format
 #| msgid ""
 #| "This section explains how to add to or even replace an existing linux "
@@ -1342,7 +1106,7 @@ msgstr ""
 "command>."
 
 #. Tag: para
-#: install-methods.xml:731
+#: install-methods.xml:741
 #, fuzzy, no-c-format
 #| msgid ""
 #| "At boot time, both bootloaders support loading in memory not only the "
@@ -1358,7 +1122,7 @@ msgstr ""
 "rodfilsystem af kernen."
 
 #. Tag: para
-#: install-methods.xml:737
+#: install-methods.xml:747
 #, fuzzy, no-c-format
 #| msgid ""
 #| "Copy the following files from the &debian; archives to a convenient "
@@ -1373,19 +1137,19 @@ msgstr ""
 "filsystem), for eksempel <filename>/boot/newinstall/</filename>."
 
 #. Tag: para
-#: install-methods.xml:744
+#: install-methods.xml:754
 #, no-c-format
 msgid "<filename>vmlinuz</filename> (kernel binary)"
 msgstr "<filename>vmlinuz</filename> (kernens binære fil)"
 
 #. Tag: para
-#: install-methods.xml:749
+#: install-methods.xml:759
 #, no-c-format
 msgid "<filename>initrd.gz</filename> (ramdisk image)"
 msgstr "<filename>initrd.gz</filename> (ramdisk-aftryk)"
 
 #. Tag: para
-#: install-methods.xml:756
+#: install-methods.xml:766
 #, no-c-format
 msgid ""
 "If you intend to use the hard drive only for booting and then download "
@@ -1401,7 +1165,7 @@ msgstr ""
 "selvom du bør gøre dette med forsigtighed."
 
 #. Tag: para
-#: install-methods.xml:765
+#: install-methods.xml:775
 #, fuzzy, no-c-format
 msgid ""
 "Alternatively, if you intend to keep an existing partition on the hard drive "
@@ -1419,7 +1183,7 @@ msgstr ""
 "aftrykket, uden at kræve netværket."
 
 #. Tag: para
-#: install-methods.xml:773
+#: install-methods.xml:783
 #, no-c-format
 msgid ""
 "Finally, to configure the bootloader proceed to <xref linkend=\"boot-initrd"
@@ -1429,14 +1193,14 @@ msgstr ""
 "\"boot-initrd\"/>."
 
 #. Tag: title
-#: install-methods.xml:783
+#: install-methods.xml:793
 #, no-c-format
 msgid "Hard disk installer booting from DOS using <command>loadlin</command>"
 msgstr ""
 "Harddiskinstallationen starter op fra DOS med <command>loadlin</command>"
 
 #. Tag: para
-#: install-methods.xml:784
+#: install-methods.xml:794
 #, no-c-format
 msgid ""
 "This section explains how to prepare your hard drive for booting the "
@@ -1446,7 +1210,7 @@ msgstr ""
 "installationsprogrammet op fra DOS med <command>loadlin</command>."
 
 #. Tag: para
-#: install-methods.xml:789
+#: install-methods.xml:799
 #, fuzzy, no-c-format
 #| msgid ""
 #| "Copy the following directories from a &debian; CD image to <filename>c:"
@@ -1459,7 +1223,7 @@ msgstr ""
 "filename>."
 
 #. Tag: para
-#: install-methods.xml:794
+#: install-methods.xml:804
 #, no-c-format
 msgid ""
 "<filename>/&x86-install-dir;</filename> (kernel binary and ramdisk image)"
@@ -1467,19 +1231,19 @@ msgstr ""
 "<filename>/&x86-install-dir;</filename> (kernens binære fil og ramdiskaftryk)"
 
 #. Tag: para
-#: install-methods.xml:799
+#: install-methods.xml:809
 #, no-c-format
 msgid "<filename>/tools</filename> (loadlin tool)"
 msgstr "<filename>/tools</filename> (loadlin-værktøj)"
 
 #. Tag: title
-#: install-methods.xml:911
+#: install-methods.xml:827
 #, no-c-format
 msgid "Preparing Files for TFTP Net Booting"
 msgstr "Forberedelse af filer for TFTP-netopstart"
 
 #. Tag: para
-#: install-methods.xml:912
+#: install-methods.xml:828
 #, no-c-format
 msgid ""
 "If your machine is connected to a local area network, you may be able to "
@@ -1496,7 +1260,7 @@ msgstr ""
 "maskine."
 
 #. Tag: para
-#: install-methods.xml:920
+#: install-methods.xml:836
 #, no-c-format
 msgid ""
 "You need to set up a TFTP server, and for many machines a DHCP server<phrase "
@@ -1508,7 +1272,7 @@ msgstr ""
 "\"supports-bootp\">, eller BOOTP-server</phrase>."
 
 #. Tag: para
-#: install-methods.xml:927
+#: install-methods.xml:843
 #, no-c-format
 msgid ""
 "<phrase condition=\"supports-rarp\">The Reverse Address Resolution Protocol "
@@ -1529,29 +1293,7 @@ msgstr ""
 "konfigureres via DHCP."
 
 #. Tag: para
-#: install-methods.xml:941
-#, no-c-format
-msgid ""
-"For PowerPC, if you have a NewWorld Power Macintosh machine, it is a good "
-"idea to use DHCP instead of BOOTP. Some of the latest machines are unable to "
-"boot using BOOTP."
-msgstr ""
-"For PowerPC, hvis du har en NewWorld Power Macintosh-maskine, er det en god "
-"ide at bruge DHCP i stedet for BOOTP. Nogle af de seneste maskiner kan ikke "
-"starte op via BOOTP."
-
-#. Tag: para
-#: install-methods.xml:947
-#, no-c-format
-msgid ""
-"Some older HPPA machines (e.g. 715/75) use RBOOTD rather than BOOTP. There "
-"is an <classname>rbootd</classname> package available in &debian;."
-msgstr ""
-"Nogle ældre HPPA-maskiner (f.eks. 715/75) bruger RBOOTD frem for BOOTP. Der "
-"er en <classname>rbootd</classname>-pakke tilgængelig i &debian;."
-
-#. Tag: para
-#: install-methods.xml:952
+#: install-methods.xml:869
 #, no-c-format
 msgid ""
 "The Trivial File Transfer Protocol (TFTP) is used to serve the boot image to "
@@ -1565,7 +1307,7 @@ msgstr ""
 "angiver vi kommandoer for SunOS 4.x, SunOS 5.x (a.k.a. Solaris) og GNU/Linux."
 
 #. Tag: para
-#: install-methods.xml:960
+#: install-methods.xml:877
 #, no-c-format
 msgid ""
 "For a &debian-gnu; server we recommend <classname>tftpd-hpa</classname>. "
@@ -1579,13 +1321,13 @@ msgstr ""
 "til problemstillinger. Et godt alternativ er <classname>atftpd</classname>."
 
 #. Tag: title
-#: install-methods.xml:976
+#: install-methods.xml:893
 #, no-c-format
 msgid "Setting up RARP server"
 msgstr "Opsætning af en RARP-server"
 
 #. Tag: para
-#: install-methods.xml:977
+#: install-methods.xml:894
 #, fuzzy, no-c-format
 #| msgid ""
 #| "To set up RARP, you need to know the Ethernet address (a.k.a. the MAC "
@@ -1598,9 +1340,7 @@ msgstr "Opsætning af en RARP-server"
 msgid ""
 "To set up RARP, you need to know the Ethernet address (a.k.a. the MAC "
 "address) of the client computers to be installed. If you don't know this "
-"information, you can <phrase arch=\"sparc\"> pick it off the initial "
-"OpenPROM boot messages, use the OpenBoot <userinput>.enet-addr</userinput> "
-"command, or </phrase> boot into <quote>Rescue</quote> mode and use the "
+"information, you can boot into <quote>Rescue</quote> mode and use the "
 "command <userinput>ip addr show dev eth0</userinput>."
 msgstr ""
 "For at opsætte RARP, så skal ud kende Ethernet-adressen (a.k.a. MAC-"
@@ -1612,7 +1352,7 @@ msgstr ""
 "show dev eth0</userinput>."
 
 #. Tag: para
-#: install-methods.xml:989
+#: install-methods.xml:903
 #, no-c-format
 msgid ""
 "On a RARP server system using a Linux kernel or Solaris/SunOS, you use the "
@@ -1636,13 +1376,13 @@ msgstr ""
 "-a</userinput> i SunOS 4 (Solaris 1)."
 
 #. Tag: title
-#: install-methods.xml:1010
+#: install-methods.xml:924
 #, no-c-format
 msgid "Setting up a DHCP server"
 msgstr "Opsætning af en DHCP-server"
 
 #. Tag: para
-#: install-methods.xml:1011
+#: install-methods.xml:925
 #, no-c-format
 msgid ""
 "One free software DHCP server is ISC <command>dhcpd</command>. For &debian-"
@@ -1656,7 +1396,7 @@ msgstr ""
 "filename>):"
 
 #. Tag: screen
-#: install-methods.xml:1018
+#: install-methods.xml:932
 #, no-c-format
 msgid ""
 "option domain-name \"example.com\";\n"
@@ -1700,7 +1440,7 @@ msgstr ""
 "}"
 
 #. Tag: para
-#: install-methods.xml:1020
+#: install-methods.xml:934
 #, no-c-format
 msgid ""
 "In this example, there is one server <replaceable>servername</replaceable> "
@@ -1718,7 +1458,7 @@ msgstr ""
 "navnet på filen, som hentes via TFTP."
 
 #. Tag: para
-#: install-methods.xml:1030
+#: install-methods.xml:944
 #, no-c-format
 msgid ""
 "After you have edited the <command>dhcpd</command> configuration file, "
@@ -1728,13 +1468,13 @@ msgstr ""
 "genstart den med <userinput>/etc/init.d/isc-dhcp-server restart</userinput>."
 
 #. Tag: title
-#: install-methods.xml:1038
+#: install-methods.xml:952
 #, no-c-format
 msgid "Enabling PXE Booting in the DHCP configuration"
 msgstr "Aktivering af PXE-opstart i DHCP-konfigurationen"
 
 #. Tag: para
-#: install-methods.xml:1039
+#: install-methods.xml:953
 #, no-c-format
 msgid ""
 "Here is another example for a <filename>dhcp.conf</filename> using the Pre-"
@@ -1805,7 +1545,7 @@ msgstr ""
 "<xref linkend=\"tftp-images\"/> below)."
 
 #. Tag: para
-#: install-methods.xml:1049
+#: install-methods.xml:963
 #, no-c-format
 msgid ""
 "If your machine uses UEFI to boot, you will have to specify a boot loader "
@@ -1815,7 +1555,7 @@ msgstr ""
 "opstartsindlæser passende for UEFI-maskiner, for eksempel"
 
 #. Tag: screen
-#: install-methods.xml:1053
+#: install-methods.xml:967
 #, no-c-format
 msgid ""
 "group {\n"
@@ -1837,13 +1577,13 @@ msgstr ""
 "}"
 
 #. Tag: title
-#: install-methods.xml:1066
+#: install-methods.xml:980
 #, no-c-format
 msgid "Setting up a BOOTP server"
 msgstr "Opsætning af en BOOTP-server"
 
 #. Tag: para
-#: install-methods.xml:1067
+#: install-methods.xml:981
 #, no-c-format
 msgid ""
 "There are two BOOTP servers available for GNU/Linux. The first is CMU "
@@ -1859,7 +1599,7 @@ msgstr ""
 "respektivt."
 
 #. Tag: para
-#: install-methods.xml:1075
+#: install-methods.xml:989
 #, no-c-format
 msgid ""
 "To use CMU <command>bootpd</command>, you must first uncomment (or add) the "
@@ -1887,10 +1627,7 @@ msgid ""
 "</screen></informalexample> You will need to change at least the <quote>ha</"
 "quote> option, which specifies the hardware address of the client. The "
 "<quote>bf</quote> option specifies the file a client should retrieve via "
-"TFTP; see <xref linkend=\"tftp-images\"/> for more details. <phrase arch="
-"\"mips\"> On SGI machines you can just enter the command monitor and type "
-"<userinput>printenv</userinput>. The value of the <userinput>eaddr</"
-"userinput> variable is the machine's MAC address. </phrase>"
+"TFTP; see <xref linkend=\"tftp-images\"/> for more details."
 msgstr ""
 "For at bruge CMU <command>bootpd</command>, skal du først aktivere (eller "
 "tilføje) de relevante linjer i <filename>/etc/inetd.conf</filename>. På "
@@ -1916,13 +1653,10 @@ msgstr ""
 "</screen></informalexample> Du skal mindst ændre <quote>ha</quote>-"
 "tilvalget, som angiver udstyrsadressen for klienten. Tilvalget <quote>bf</"
 "quote> specificerer filen en klient skal hente via TFTP; se <xref linkend="
-"\"tftp-images\"/> for yderligere detaljer. <phrase arch=\"mips\"> På SGI-"
-"maskiner kan du bare gå i kommandoskærmen og indtaste <userinput>printenv</"
-"userinput>. Værdien for variablen <userinput>eaddr</userinput> er maskinens "
-"MAC-adresse. </phrase>"
+"\"tftp-images\"/> for yderligere detaljer."
 
 #. Tag: para
-#: install-methods.xml:1108
+#: install-methods.xml:1016
 #, no-c-format
 msgid ""
 "By contrast, setting up BOOTP with ISC <command>dhcpd</command> is really "
@@ -1946,13 +1680,13 @@ msgstr ""
 "isc-dhcp-server restart</userinput>."
 
 #. Tag: title
-#: install-methods.xml:1127
+#: install-methods.xml:1035
 #, no-c-format
 msgid "Enabling the TFTP Server"
 msgstr "Aktivering af TFTP-serveren"
 
 #. Tag: para
-#: install-methods.xml:1128
+#: install-methods.xml:1036
 #, no-c-format
 msgid ""
 "To get the TFTP server ready to go, you should first make sure that "
@@ -1962,7 +1696,7 @@ msgstr ""
 "command> er aktiveret."
 
 #. Tag: para
-#: install-methods.xml:1133
+#: install-methods.xml:1041
 #, no-c-format
 msgid ""
 "In the case of <classname>tftpd-hpa</classname> there are two ways the "
@@ -1978,7 +1712,7 @@ msgstr ""
 "ændres ved at rekonfigurere pakken."
 
 #. Tag: para
-#: install-methods.xml:1142
+#: install-methods.xml:1050
 #, no-c-format
 msgid ""
 "Historically, TFTP servers used <filename>/tftpboot</filename> as directory "
@@ -1996,7 +1730,7 @@ msgstr ""
 "konfigurationseksemplerne i dette afsnit jævnfør dette."
 
 #. Tag: para
-#: install-methods.xml:1152
+#: install-methods.xml:1060
 #, no-c-format
 msgid ""
 "All <command>in.tftpd</command> alternatives available in &debian; should "
@@ -2012,46 +1746,14 @@ msgstr ""
 "opstartsproblemer, da de er et godt udgangspunkt for diagnosticering af "
 "fejltilfælde."
 
-#. Tag: para
-#: install-methods.xml:1160
-#, no-c-format
-msgid ""
-"If you intend to install &debian; on an SGI machine and your TFTP server is "
-"a GNU/Linux box running Linux 2.4, you'll need to set the following on your "
-"server: <informalexample><screen>\n"
-"# echo 1 &gt; /proc/sys/net/ipv4/ip_no_pmtu_disc\n"
-"</screen></informalexample> to turn off Path MTU discovery, otherwise the "
-"SGI's PROM can't download the kernel. Furthermore, make sure TFTP packets "
-"are sent from a source port no greater than 32767, or the download will "
-"stall after the first packet. Again, it's Linux 2.4.X tripping this bug in "
-"the PROM, and you can avoid it by setting <informalexample><screen>\n"
-"# echo \"2048 32767\" &gt; /proc/sys/net/ipv4/ip_local_port_range\n"
-"</screen></informalexample> to adjust the range of source ports the Linux "
-"TFTP server uses."
-msgstr ""
-"Hvis du planlægger at installere &debian; på en SGI-maskine og din TFTP-"
-"server er en GNU/Linux-boks, der kører Linux 2.4, så skal du angive det "
-"følgende på din server: nux box running Linux 2.4, you'll need to set the "
-"following on your server: <informalexample><screen>\n"
-"# echo 1 &gt; /proc/sys/net/ipv4/ip_no_pmtu_disc\n"
-"</screen></informalexample> for at deaktivere Path MTU-registrering, ellers "
-"kan SGI's PROM ikke hente kernen. Derudover skal du sikre dig, at TFTP-"
-"pakker sendes fra en kildeport, der ikke er højere end 32767, ellers vil "
-"overførslen stoppe efter den første pakke. Igen det er Linux 2.4.x der "
-"udløser denne fejl i PROM'en, og du kan undgå den ved at angive "
-"<informalexample><screen>\n"
-"# echo \"2048 32767\" &gt; /proc/sys/net/ipv4/ip_local_port_range\n"
-"</screen></informalexample> for at justere intervallet af kildeporte som "
-"Linux TFTP-serveren bruger."
-
 #. Tag: title
-#: install-methods.xml:1182
+#: install-methods.xml:1072
 #, no-c-format
 msgid "Move TFTP Images Into Place"
 msgstr "Flyt TFTP-aftryk på plads"
 
 #. Tag: para
-#: install-methods.xml:1183
+#: install-methods.xml:1073
 #, no-c-format
 msgid ""
 "Next, place the TFTP boot image you need, as found in <xref linkend=\"where-"
@@ -2067,52 +1769,7 @@ msgstr ""
 "TFTP-klienten, og der er ingen udbredte standarder."
 
 #. Tag: para
-#: install-methods.xml:1192
-#, no-c-format
-msgid ""
-"On NewWorld Power Macintosh machines, you will need to set up the "
-"<command>yaboot</command> boot loader as the TFTP boot image. "
-"<command>Yaboot</command> will then retrieve the kernel and RAMdisk images "
-"via TFTP itself. You will need to download the following files from the "
-"<filename>netboot/</filename> directory:"
-msgstr ""
-"På NewWorld Power Macintosh-maskiner skal du opsætte opstartsindlæseren "
-"<command>yaboot</command> som TFTP-opstartsaftryk. <command>Yaboot</command> "
-"vil selv hente kernen og RAMdisk-aftryk via TFTP. Du skal hente de følgende "
-"filer fra mappen <filename>netboot/</filename>:"
-
-#. Tag: filename
-#: install-methods.xml:1203
-#, no-c-format
-msgid "vmlinux"
-msgstr "vmlinux"
-
-#. Tag: filename
-#: install-methods.xml:1208
-#, no-c-format
-msgid "initrd.gz"
-msgstr "initrd.gz"
-
-#. Tag: filename
-#: install-methods.xml:1213
-#, no-c-format
-msgid "yaboot"
-msgstr "yaboot"
-
-#. Tag: filename
-#: install-methods.xml:1218
-#, no-c-format
-msgid "yaboot.conf"
-msgstr "yaboot.conf"
-
-#. Tag: filename
-#: install-methods.xml:1223
-#, no-c-format
-msgid "boot.msg"
-msgstr "boot.msg"
-
-#. Tag: para
-#: install-methods.xml:1228
+#: install-methods.xml:1124
 #, no-c-format
 msgid ""
 "For PXE booting, everything you should need is set up in the "
@@ -2131,115 +1788,14 @@ msgstr ""
 "du sende et passende EFI-opstartsaftryksnavn (såsom <filename>/debian-"
 "installer/amd64/bootnetx64.efi</filename>)."
 
-#. Tag: para
-#: install-methods.xml:1238
-#, no-c-format
-msgid ""
-"For PXE booting, everything you should need is set up in the "
-"<filename>netboot/netboot.tar.gz</filename> tarball. Simply extract this "
-"tarball into the <command>tftpd</command> boot image directory. Make sure "
-"your dhcp server is configured to pass <filename>/debian-installer/ia64/"
-"elilo.efi</filename> to <command>tftpd</command> as the filename to boot."
-msgstr ""
-"For PXE-opstart befinder alt du bør sætte op sig i tarball'en "
-"<filename>netboot/netboot.tar.gz</filename>. Udpak denne tarbal i mappen for "
-"opstartsaftrykket <command>tftpd</command>. Sikr dig at din dhcp-server er "
-"konfigureret til at sende <filename>/debian-installer/ia64/elilo.efi</"
-"filename> til <command>tftpd</command> som filnavnet at starte op."
-
 #. Tag: title
-#: install-methods.xml:1250
-#, no-c-format
-msgid "SPARC TFTP Booting"
-msgstr "SPARC TFTP-opstart"
-
-#. Tag: para
-#: install-methods.xml:1251
-#, no-c-format
-msgid ""
-"Some SPARC architectures add the subarchitecture names, such as "
-"<quote>SUN4M</quote> or <quote>SUN4C</quote>, to the filename. Thus, if your "
-"system's subarchitecture is a SUN4C, and its IP is 192.168.1.3, the filename "
-"would be <filename>C0A80103.SUN4C</filename>. However, there are also "
-"subarchitectures where the file the client looks for is just "
-"<filename>client-ip-in-hex</filename>. An easy way to determine the "
-"hexadecimal code for the IP address is to enter the following command in a "
-"shell (assuming the machine's intended IP is 10.0.0.4). "
-"<informalexample><screen>\n"
-"$ printf '%.2x%.2x%.2x%.2x\\n' 10 0 0 4\n"
-"</screen></informalexample> To get to the correct filename, you will need to "
-"change all letters to uppercase and if necessary append the subarchitecture "
-"name."
-msgstr ""
-"Nogle SPARC-arkitekturer tilføjer underarkitekturnavne, såsom <quote>SUN4M</"
-"quote> eller <quote>SUN4C</quote>, til filnavnet. Hvis dit systems "
-"underarkitektur er en SUN4c, og dets IP er 192.168.1.3, vil filnavnet være "
-"<filename>C0A80103.SUN4C</filename>. Men der er også underarkitekturer hvor "
-"filen klienten kigger efter kun er <filename>client-ip-in-hex</filename>. En "
-"nem måde at bestemme den hexadecimale kode for IP-adressen er at indtaste "
-"den følgende kommando i en skal (under antagelse af at maskinens forventede "
-"IP er 10.0.0.4). <informalexample><screen>\n"
-"$ printf '%.2x%.2x%.2x%.2x\\n' 10 0 0 4\n"
-"</screen></informalexample> For at hente det korrekte filnavn, så skal du "
-"ændre alle bogstaverne til store bogstaver og om nødvendigt tilføje "
-"underarkitekturnavnet."
-
-#. Tag: para
-#: install-methods.xml:1267
-#, no-c-format
-msgid ""
-"If you've done all this correctly, giving the command <userinput>boot net</"
-"userinput> from the OpenPROM should load the image. If the image cannot be "
-"found, try checking the logs on your tftp server to see which image name is "
-"being requested."
-msgstr ""
-"Hvis du har gjort alt dette korrekt, vil kommandoen <userinput>boot net</"
-"userinput> fra OpenPROM indlæse aftrykket. Hvis aftrykket ikke kan findes, "
-"så prøv at kontrollere loggene på din tftp-server for at se hvilket "
-"aftryksnavn der anmodes om."
-
-#. Tag: para
-#: install-methods.xml:1274
-#, no-c-format
-msgid ""
-"You can also force some sparc systems to look for a specific file name by "
-"adding it to the end of the OpenPROM boot command, such as <userinput>boot "
-"net my-sparc.image</userinput>. This must still reside in the directory that "
-"the TFTP server looks in."
-msgstr ""
-"Du kan også fremtvinge nogle sparc-systemer til at kigge efter et specifikt "
-"filnavn ved at tilføjet det til slutningen af OpenPROM-opstartskommandoen, "
-"såsom <userinput>boot net my-sparc.image</userinput>. Dette skal stadig "
-"befinde sig i mappen som TFTP-serveren kigger i."
-
-#. Tag: title
-#: install-methods.xml:1285
-#, no-c-format
-msgid "SGI TFTP Booting"
-msgstr "SGI TFTP-opstart"
-
-#. Tag: para
-#: install-methods.xml:1286
-#, no-c-format
-msgid ""
-"On SGI machines you can rely on the <command>bootpd</command> to supply the "
-"name of the TFTP file. It is given either as the <userinput>bf=</userinput> "
-"in <filename>/etc/bootptab</filename> or as the <userinput>filename=</"
-"userinput> option in <filename>/etc/dhcpd.conf</filename>."
-msgstr ""
-"På SGI-maskiner kan du stole på <command>bootpd</command> for at levere "
-"navnet på TFTP-filen. Den angives enten som <userinput>bf=</userinput> i "
-"<filename>/etc/bootptab</filename> eller som <userinput>filename=</"
-"userinput>-tlvalget i <filename>/etc/dhcpd.conf</filename>."
-
-#. Tag: title
-#: install-methods.xml:1394
+#: install-methods.xml:1143
 #, no-c-format
 msgid "Automatic Installation"
 msgstr "Automatisk installation"
 
 #. Tag: para
-#: install-methods.xml:1395
+#: install-methods.xml:1144
 #, no-c-format
 msgid ""
 "For installing on multiple computers it's possible to do fully automatic "
@@ -2255,13 +1811,13 @@ msgstr ""
 "\">FAI's hjemmeside</ulink> for detaljeret information."
 
 #. Tag: title
-#: install-methods.xml:1407
+#: install-methods.xml:1156
 #, no-c-format
 msgid "Automatic Installation Using the &debian; Installer"
 msgstr "Automatisk installation med &debian;-installationsprogrammet"
 
 #. Tag: para
-#: install-methods.xml:1408
+#: install-methods.xml:1157
 #, no-c-format
 msgid ""
 "The &debian; Installer supports automating installs via preconfiguration "
@@ -2275,7 +1831,7 @@ msgstr ""
 "stillet under installationsprocessen."
 
 #. Tag: para
-#: install-methods.xml:1415
+#: install-methods.xml:1164
 #, no-c-format
 msgid ""
 "Full documentation on preseeding including a working example that you can "
@@ -2285,13 +1841,13 @@ msgstr ""
 "kan redigere er i <xref linkend=\"appendix-preseed\"/>."
 
 #. Tag: title
-#: install-methods.xml:1429
+#: install-methods.xml:1178
 #, no-c-format
 msgid "Verifying the integrity of installation files"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1431
+#: install-methods.xml:1180
 #, no-c-format
 msgid ""
 "You can verify the integrity of downloaded files against checksums provided "
@@ -2301,7 +1857,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1442
+#: install-methods.xml:1191
 #, no-c-format
 msgid ""
 "<ulink url=\"https://cdimage.debian.org/debian-cd/current/&architecture;/iso-"
@@ -2309,7 +1865,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1448
+#: install-methods.xml:1197
 #, no-c-format
 msgid ""
 "<ulink url=\"https://cdimage.debian.org/debian-cd/current/&architecture;/iso-"
@@ -2317,7 +1873,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1454
+#: install-methods.xml:1203
 #, no-c-format
 msgid ""
 "<ulink url=\"https://cdimage.debian.org/debian-cd/current/&architecture;/iso-"
@@ -2325,7 +1881,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1460
+#: install-methods.xml:1209
 #, no-c-format
 msgid ""
 "<ulink url=\"http://http.us.debian.org/debian/dists/&releasename;/main/"
@@ -2334,7 +1890,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1468
+#: install-methods.xml:1217
 #, no-c-format
 msgid ""
 "To compute the checksum of a downloaded installation file, use "
@@ -2348,7 +1904,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1481
+#: install-methods.xml:1230
 #, no-c-format
 msgid ""
 "The <ulink url=\"&url-debian-cd-faq;\">Debian CD FAQ</ulink> has <ulink url="
@@ -2359,6 +1915,385 @@ msgid ""
 "files themselves."
 msgstr ""
 
+#, no-c-format
+#~ msgid ""
+#~ "Create a partition of type \"Apple_Bootstrap\" on your USB stick using "
+#~ "<command>mac-fdisk</command>'s <userinput>C</userinput> command and "
+#~ "extract the image directly to that:"
+#~ msgstr ""
+#~ "Opret en partition af typen »Apple_Bootstrap« på dit USB-drev via "
+#~ "<command>mac-fdisk</command>s <userinput>C</userinput>-kommando og udtræk "
+#~ "aftrykket direkte til denne:"
+
+#, no-c-format
+#~ msgid "# zcat boot.img.gz &gt; /dev/<replaceable>sdX2</replaceable>"
+#~ msgstr "# zcat boot.img.gz &gt; /dev/<replaceable>sdX2</replaceable>"
+
+#, no-c-format
+#~ msgid "Partitioning the USB stick"
+#~ msgstr "Partitionering af USB-drevet"
+
+#, no-c-format
+#~ msgid ""
+#~ "Most USB sticks do not come pre-configured in such a way that Open "
+#~ "Firmware can boot from them, so you will need to repartition the stick. "
+#~ "On Mac systems, run <userinput>mac-fdisk /dev/<replaceable>sdX</"
+#~ "replaceable></userinput>, initialise a new partition map using the "
+#~ "<userinput>i</userinput> command, and create a new partition of type "
+#~ "Apple_Bootstrap using the <userinput>C</userinput> command. (Note that "
+#~ "the first \"partition\" will always be the partition map itself.) Then "
+#~ "type <informalexample><screen>\n"
+#~ "$ hformat /dev/<replaceable>sdX2</replaceable>\n"
+#~ "</screen></informalexample> Take care that you use the correct device "
+#~ "name for your USB stick. The <command>hformat</command> command is "
+#~ "contained in the <classname>hfsutils</classname> &debian; package."
+#~ msgstr ""
+#~ "De fleste USB-drev er ikke prækonfigurerede på en sådan måde at Open "
+#~ "Firmware kan starte op fra dem, så du skal partitionere drevet om. På Mac-"
+#~ "systemer, kør <userinput>mac-fdisk /dev/<replaceable>sdX</replaceable></"
+#~ "userinput>, initialiser et nyt partitionskort via kommandoen "
+#~ "<userinput>i</userinput>, og opret en ny partition af typen "
+#~ "Apple_Bootstrap via kommandoen <userinput>C</userinput>. (Bemærk at den "
+#~ "første »partition« altid vil være selve partitionskortet). Tast så "
+#~ "<informalexample><screen>\n"
+#~ "$ hformat /dev/<replaceable>sdX2</replaceable>\n"
+#~ "</screen></informalexample> Sikr dig, at du bruger det korrekte "
+#~ "enhedsnavn på dit USB-drev. Kommandoen <command>hformat</command> er "
+#~ "indeholdt i &debian;-pakken <classname>hfsutils</classname>."
+
+#, no-c-format
+#~ msgid ""
+#~ "In order to start the kernel after booting from the USB stick, we will "
+#~ "put a boot loader on the stick. The <command>yaboot</command> boot loader "
+#~ "can be installed on an HFS filesystem and can be reconfigured by just "
+#~ "editing a text file. Any operating system which supports the HFS file "
+#~ "system can be used to make changes to the configuration of the boot "
+#~ "loader."
+#~ msgstr ""
+#~ "For at starte kernen efter opstart fra USB-drevet, vil vi placere en "
+#~ "opstartsindlæser på drevet. Opstartsindlæseren <command>yaboot</command> "
+#~ "kan installeres på et HFS-filsystem og kan konfigureres om ved bare at "
+#~ "redigere en tekstfil. Alle operativsystemer som understøtter HFS-"
+#~ "filsystemet kan bruges til at udføre ændringer til konfigurationen af "
+#~ "opstartsindlæseren."
+
+#, no-c-format
+#~ msgid ""
+#~ "The normal <command>ybin</command> tool that comes with <command>yaboot</"
+#~ "command> does not yet understand USB storage devices, so you will have to "
+#~ "install <command>yaboot</command> by hand using the <classname>hfsutils</"
+#~ "classname> tools. Type <informalexample><screen>\n"
+#~ "$ hmount /dev/<replaceable>sdX2</replaceable>\n"
+#~ "$ hcopy -r /usr/lib/yaboot/yaboot :\n"
+#~ "$ hattrib -c UNIX -t tbxi :yaboot\n"
+#~ "$ hattrib -b :\n"
+#~ "$ humount\n"
+#~ "</screen></informalexample> Again, take care that you use the correct "
+#~ "device name. The partition must not be otherwise mounted during this "
+#~ "procedure. This procedure writes the boot loader to the partition, and "
+#~ "uses the HFS utilities to mark it in such a way that Open Firmware will "
+#~ "boot it. Having done this, the rest of the USB stick may be prepared "
+#~ "using the normal Unix utilities."
+#~ msgstr ""
+#~ "Det normale værktøj <command>ybin</command>, som følger med "
+#~ "<command>yaboot</command> forstår endnu ikke USB-lagerenheder, så du skal "
+#~ "installere <command>yaboot</command> manuelt via <classname>hfsutils</"
+#~ "classname>-værktøjerne. Tast <informalexample><screen>\n"
+#~ "$ hmount /dev/<replaceable>sdX2</replaceable>\n"
+#~ "$ hcopy -r /usr/lib/yaboot/yaboot :\n"
+#~ "$ hattrib -c UNIX -t tbxi :yaboot\n"
+#~ "$ hattrib -b :\n"
+#~ "$ humount\n"
+#~ "</screen></informalexample> Sikr dig, at du bruger det korrekte "
+#~ "enhedsnavn. Partitionen må ikke på anden vis monteres under denne "
+#~ "procedure. Denne procedure skriver opstartsindlæseren til partitionen, og "
+#~ "bruger HFS-redskaberne til at markere den på en måde så at Open Firmware "
+#~ "vil starte den op. Når dette er gjort kan resten af USB-drevet forberedes "
+#~ "med normale UNIX-redskaber."
+
+#, no-c-format
+#~ msgid "Adding the installer image"
+#~ msgstr "Tilføjelse af installationsprogrammets aftryk"
+
+#, no-c-format
+#~ msgid ""
+#~ "Mount the partition (<userinput>mount /dev/<replaceable>sdX2</"
+#~ "replaceable> /mnt</userinput>) and copy the following installer image "
+#~ "files to the stick:"
+#~ msgstr ""
+#~ "Monter partitionen (<userinput>mount /dev/<replaceable>sdX2</"
+#~ "replaceable> /mnt</userinput>) og kopier de følgende "
+#~ "installationsaftryksfiler til drevet:"
+
+#, no-c-format
+#~ msgid "<filename>vmlinux</filename> (kernel binary)"
+#~ msgstr "<filename>vmlinux</filename> (kernens binære fil)"
+
+#, no-c-format
+#~ msgid "<filename>initrd.gz</filename> (initial ramdisk image)"
+#~ msgstr "<filename>initrd.gz</filename> (oprindelig ramdisk-aftryk)"
+
+#, no-c-format
+#~ msgid "<filename>yaboot.conf</filename> (yaboot configuration file)"
+#~ msgstr "<filename>yaboot.conf</filename> (yaboot-konfigurationsfil)"
+
+#, no-c-format
+#~ msgid "<filename>boot.msg</filename> (optional boot message)"
+#~ msgstr "<filename>boot.msg</filename> (valgfri opstartsbesked)"
+
+#, no-c-format
+#~ msgid ""
+#~ "The <filename>yaboot.conf</filename> configuration file should contain "
+#~ "the following lines: <informalexample><screen>\n"
+#~ "default=install\n"
+#~ "root=/dev/ram\n"
+#~ "\n"
+#~ "message=/boot.msg\n"
+#~ "\n"
+#~ "image=/vmlinux\n"
+#~ "        label=install\n"
+#~ "        initrd=/initrd.gz\n"
+#~ "        initrd-size=10000\n"
+#~ "        read-only\n"
+#~ "</screen></informalexample> Please note that the <userinput>initrd-size</"
+#~ "userinput> parameter may need to be increased, depending on the image you "
+#~ "are booting."
+#~ msgstr ""
+#~ "Konfigurationsfilen <filename>yaboot.conf</filename> bør indeholder de "
+#~ "følgende linjer: <informalexample><screen>\n"
+#~ "default=install\n"
+#~ "root=/dev/ram\n"
+#~ "\n"
+#~ "message=/boot.msg\n"
+#~ "\n"
+#~ "image=/vmlinux\n"
+#~ "        label=install\n"
+#~ "        initrd=/initrd.gz\n"
+#~ "        initrd-size=10000\n"
+#~ "        read-only\n"
+#~ "</screen></informalexample> Bemærk venligst at parameteren "
+#~ "<userinput>initrd-size</userinput> måske skal øges, afhængig af aftrykket "
+#~ "du indlæser."
+
+#, no-c-format
+#~ msgid ""
+#~ "If you used an <filename>hd-media</filename> image, you should now copy "
+#~ "the ISO file of a &debian; ISO image<footnote> <para> You can use either "
+#~ "a netinst or a full CD image (see <xref linkend=\"official-cdrom\"/>). Be "
+#~ "sure to select one that fits. Note that the <quote>netboot <filename>mini."
+#~ "iso</filename></quote> image is not usable for this purpose. </para> </"
+#~ "footnote> onto the stick. When you are done, unmount the USB memory stick "
+#~ "(<userinput>umount /mnt</userinput>)."
+#~ msgstr ""
+#~ "Hvis du anvendte et <filename>hd-media</filename>-aftryk, så bør du "
+#~ "kopiere ISO-filen for et &debian;-ISO-aftryk<footnote> <para> Du kan "
+#~ "bruge enten en netinst eller et fuld cd-aftryk (se <xref linkend="
+#~ "\"official-cdrom\"/>). Vær sikker på at vælge et som passer. Bemærk at "
+#~ "<quote>netboot <filename>mini.iso</filename></quote>-aftrykket ikke er "
+#~ "brugbar til dette formål. </para> </footnote> ned på drevet. Når du er "
+#~ "færdig, afmonter USB-drevet (<userinput>umount /mnt</userinput>)."
+
+#, no-c-format
+#~ msgid ""
+#~ "The installer cannot boot from files on an HFS+ file system. MacOS System "
+#~ "8.1 and above may use HFS+ file systems; NewWorld PowerMacs all use HFS+. "
+#~ "To determine whether your existing file system is HFS+, select "
+#~ "<userinput>Get Info</userinput> for the volume in question. HFS file "
+#~ "systems appear as <userinput>Mac OS Standard</userinput>, while HFS+ file "
+#~ "systems say <userinput>Mac OS Extended</userinput>. You must have an HFS "
+#~ "partition in order to exchange files between MacOS and Linux, in "
+#~ "particular the installation files you download."
+#~ msgstr ""
+#~ "Installationsprogrammet kan ikke starte op fra filer på et HFS+-"
+#~ "filsystem. MacOS System 8.1 og senere kan bruge HFS+-filsystemer; "
+#~ "NewWorld PowerMacs bruger alle HFS+. For at bestemme om dit eksisterende "
+#~ "filsystem er HFS+, vælges <userinput>Hent information</userinput> for "
+#~ "diskenheden. HFS-filsystemet fremstår som <userinput>Mac OS Standard</"
+#~ "userinput>, mens HFS+-filsystemet er <userinput>Mac OS Extended</"
+#~ "userinput>. Du skal have en HFS-partition for at udtrække filer mellem "
+#~ "MacOS og Linux, specielt installationsfilerne du hentede."
+
+#, no-c-format
+#~ msgid ""
+#~ "Different programs are used for hard disk installation system booting, "
+#~ "depending on whether the system is a <quote>NewWorld</quote> or an "
+#~ "<quote>OldWorld</quote> model."
+#~ msgstr ""
+#~ "Forskellige programmer bruges til systemopstart af installationen fra "
+#~ "harddisk afhængig af om systemet er <quote>NewWorld</quote> eller "
+#~ "<quote>OldWorld</quote>."
+
+#, no-c-format
+#~ msgid ""
+#~ "For PowerPC, if you have a NewWorld Power Macintosh machine, it is a good "
+#~ "idea to use DHCP instead of BOOTP. Some of the latest machines are unable "
+#~ "to boot using BOOTP."
+#~ msgstr ""
+#~ "For PowerPC, hvis du har en NewWorld Power Macintosh-maskine, er det en "
+#~ "god ide at bruge DHCP i stedet for BOOTP. Nogle af de seneste maskiner "
+#~ "kan ikke starte op via BOOTP."
+
+#, no-c-format
+#~ msgid ""
+#~ "Some older HPPA machines (e.g. 715/75) use RBOOTD rather than BOOTP. "
+#~ "There is an <classname>rbootd</classname> package available in &debian;."
+#~ msgstr ""
+#~ "Nogle ældre HPPA-maskiner (f.eks. 715/75) bruger RBOOTD frem for BOOTP. "
+#~ "Der er en <classname>rbootd</classname>-pakke tilgængelig i &debian;."
+
+#, no-c-format
+#~ msgid ""
+#~ "If you intend to install &debian; on an SGI machine and your TFTP server "
+#~ "is a GNU/Linux box running Linux 2.4, you'll need to set the following on "
+#~ "your server: <informalexample><screen>\n"
+#~ "# echo 1 &gt; /proc/sys/net/ipv4/ip_no_pmtu_disc\n"
+#~ "</screen></informalexample> to turn off Path MTU discovery, otherwise the "
+#~ "SGI's PROM can't download the kernel. Furthermore, make sure TFTP packets "
+#~ "are sent from a source port no greater than 32767, or the download will "
+#~ "stall after the first packet. Again, it's Linux 2.4.X tripping this bug "
+#~ "in the PROM, and you can avoid it by setting <informalexample><screen>\n"
+#~ "# echo \"2048 32767\" &gt; /proc/sys/net/ipv4/ip_local_port_range\n"
+#~ "</screen></informalexample> to adjust the range of source ports the Linux "
+#~ "TFTP server uses."
+#~ msgstr ""
+#~ "Hvis du planlægger at installere &debian; på en SGI-maskine og din TFTP-"
+#~ "server er en GNU/Linux-boks, der kører Linux 2.4, så skal du angive det "
+#~ "følgende på din server: nux box running Linux 2.4, you'll need to set the "
+#~ "following on your server: <informalexample><screen>\n"
+#~ "# echo 1 &gt; /proc/sys/net/ipv4/ip_no_pmtu_disc\n"
+#~ "</screen></informalexample> for at deaktivere Path MTU-registrering, "
+#~ "ellers kan SGI's PROM ikke hente kernen. Derudover skal du sikre dig, at "
+#~ "TFTP-pakker sendes fra en kildeport, der ikke er højere end 32767, ellers "
+#~ "vil overførslen stoppe efter den første pakke. Igen det er Linux 2.4.x "
+#~ "der udløser denne fejl i PROM'en, og du kan undgå den ved at angive "
+#~ "<informalexample><screen>\n"
+#~ "# echo \"2048 32767\" &gt; /proc/sys/net/ipv4/ip_local_port_range\n"
+#~ "</screen></informalexample> for at justere intervallet af kildeporte som "
+#~ "Linux TFTP-serveren bruger."
+
+#, no-c-format
+#~ msgid ""
+#~ "On NewWorld Power Macintosh machines, you will need to set up the "
+#~ "<command>yaboot</command> boot loader as the TFTP boot image. "
+#~ "<command>Yaboot</command> will then retrieve the kernel and RAMdisk "
+#~ "images via TFTP itself. You will need to download the following files "
+#~ "from the <filename>netboot/</filename> directory:"
+#~ msgstr ""
+#~ "På NewWorld Power Macintosh-maskiner skal du opsætte opstartsindlæseren "
+#~ "<command>yaboot</command> som TFTP-opstartsaftryk. <command>Yaboot</"
+#~ "command> vil selv hente kernen og RAMdisk-aftryk via TFTP. Du skal hente "
+#~ "de følgende filer fra mappen <filename>netboot/</filename>:"
+
+#, no-c-format
+#~ msgid "vmlinux"
+#~ msgstr "vmlinux"
+
+#, no-c-format
+#~ msgid "initrd.gz"
+#~ msgstr "initrd.gz"
+
+#, no-c-format
+#~ msgid "yaboot"
+#~ msgstr "yaboot"
+
+#, no-c-format
+#~ msgid "yaboot.conf"
+#~ msgstr "yaboot.conf"
+
+#, no-c-format
+#~ msgid "boot.msg"
+#~ msgstr "boot.msg"
+
+#, no-c-format
+#~ msgid ""
+#~ "For PXE booting, everything you should need is set up in the "
+#~ "<filename>netboot/netboot.tar.gz</filename> tarball. Simply extract this "
+#~ "tarball into the <command>tftpd</command> boot image directory. Make sure "
+#~ "your dhcp server is configured to pass <filename>/debian-installer/ia64/"
+#~ "elilo.efi</filename> to <command>tftpd</command> as the filename to boot."
+#~ msgstr ""
+#~ "For PXE-opstart befinder alt du bør sætte op sig i tarball'en "
+#~ "<filename>netboot/netboot.tar.gz</filename>. Udpak denne tarbal i mappen "
+#~ "for opstartsaftrykket <command>tftpd</command>. Sikr dig at din dhcp-"
+#~ "server er konfigureret til at sende <filename>/debian-installer/ia64/"
+#~ "elilo.efi</filename> til <command>tftpd</command> som filnavnet at starte "
+#~ "op."
+
+#, no-c-format
+#~ msgid "SPARC TFTP Booting"
+#~ msgstr "SPARC TFTP-opstart"
+
+#, no-c-format
+#~ msgid ""
+#~ "Some SPARC architectures add the subarchitecture names, such as "
+#~ "<quote>SUN4M</quote> or <quote>SUN4C</quote>, to the filename. Thus, if "
+#~ "your system's subarchitecture is a SUN4C, and its IP is 192.168.1.3, the "
+#~ "filename would be <filename>C0A80103.SUN4C</filename>. However, there are "
+#~ "also subarchitectures where the file the client looks for is just "
+#~ "<filename>client-ip-in-hex</filename>. An easy way to determine the "
+#~ "hexadecimal code for the IP address is to enter the following command in "
+#~ "a shell (assuming the machine's intended IP is 10.0.0.4). "
+#~ "<informalexample><screen>\n"
+#~ "$ printf '%.2x%.2x%.2x%.2x\\n' 10 0 0 4\n"
+#~ "</screen></informalexample> To get to the correct filename, you will need "
+#~ "to change all letters to uppercase and if necessary append the "
+#~ "subarchitecture name."
+#~ msgstr ""
+#~ "Nogle SPARC-arkitekturer tilføjer underarkitekturnavne, såsom "
+#~ "<quote>SUN4M</quote> eller <quote>SUN4C</quote>, til filnavnet. Hvis dit "
+#~ "systems underarkitektur er en SUN4c, og dets IP er 192.168.1.3, vil "
+#~ "filnavnet være <filename>C0A80103.SUN4C</filename>. Men der er også "
+#~ "underarkitekturer hvor filen klienten kigger efter kun er "
+#~ "<filename>client-ip-in-hex</filename>. En nem måde at bestemme den "
+#~ "hexadecimale kode for IP-adressen er at indtaste den følgende kommando i "
+#~ "en skal (under antagelse af at maskinens forventede IP er 10.0.0.4). "
+#~ "<informalexample><screen>\n"
+#~ "$ printf '%.2x%.2x%.2x%.2x\\n' 10 0 0 4\n"
+#~ "</screen></informalexample> For at hente det korrekte filnavn, så skal du "
+#~ "ændre alle bogstaverne til store bogstaver og om nødvendigt tilføje "
+#~ "underarkitekturnavnet."
+
+#, no-c-format
+#~ msgid ""
+#~ "If you've done all this correctly, giving the command <userinput>boot "
+#~ "net</userinput> from the OpenPROM should load the image. If the image "
+#~ "cannot be found, try checking the logs on your tftp server to see which "
+#~ "image name is being requested."
+#~ msgstr ""
+#~ "Hvis du har gjort alt dette korrekt, vil kommandoen <userinput>boot net</"
+#~ "userinput> fra OpenPROM indlæse aftrykket. Hvis aftrykket ikke kan "
+#~ "findes, så prøv at kontrollere loggene på din tftp-server for at se "
+#~ "hvilket aftryksnavn der anmodes om."
+
+#, no-c-format
+#~ msgid ""
+#~ "You can also force some sparc systems to look for a specific file name by "
+#~ "adding it to the end of the OpenPROM boot command, such as "
+#~ "<userinput>boot net my-sparc.image</userinput>. This must still reside in "
+#~ "the directory that the TFTP server looks in."
+#~ msgstr ""
+#~ "Du kan også fremtvinge nogle sparc-systemer til at kigge efter et "
+#~ "specifikt filnavn ved at tilføjet det til slutningen af OpenPROM-"
+#~ "opstartskommandoen, såsom <userinput>boot net my-sparc.image</userinput>. "
+#~ "Dette skal stadig befinde sig i mappen som TFTP-serveren kigger i."
+
+#, no-c-format
+#~ msgid "SGI TFTP Booting"
+#~ msgstr "SGI TFTP-opstart"
+
+#, no-c-format
+#~ msgid ""
+#~ "On SGI machines you can rely on the <command>bootpd</command> to supply "
+#~ "the name of the TFTP file. It is given either as the <userinput>bf=</"
+#~ "userinput> in <filename>/etc/bootptab</filename> or as the "
+#~ "<userinput>filename=</userinput> option in <filename>/etc/dhcpd.conf</"
+#~ "filename>."
+#~ msgstr ""
+#~ "På SGI-maskiner kan du stole på <command>bootpd</command> for at levere "
+#~ "navnet på TFTP-filen. Den angives enten som <userinput>bf=</userinput> i "
+#~ "<filename>/etc/bootptab</filename> eller som <userinput>filename=</"
+#~ "userinput>-tlvalget i <filename>/etc/dhcpd.conf</filename>."
+
 #~ msgid ""
 #~ "Create a second, FAT partition on the stick, mount the partition and copy "
 #~ "or unpack the firmware onto it. For example:"