diff options
author | Joey Hess <joeyh@debian.org> | 2005-10-07 19:51:38 +0000 |
---|---|---|
committer | Joey Hess <joeyh@debian.org> | 2005-10-07 19:51:38 +0000 |
commit | 1ea73eea5ecc6a8ed901316049259aee737ee554 (patch) | |
tree | 03a077f0b1b1548f3c806bd1c5795964fba0fb52 /ja/install-methods/boot-usb-files.xml | |
download | installation-guide-1ea73eea5ecc6a8ed901316049259aee737ee554.zip |
move manual to top-level directory, split out of debian-installer package
Diffstat (limited to 'ja/install-methods/boot-usb-files.xml')
-rw-r--r-- | ja/install-methods/boot-usb-files.xml | 208 |
1 files changed, 208 insertions, 0 deletions
diff --git a/ja/install-methods/boot-usb-files.xml b/ja/install-methods/boot-usb-files.xml new file mode 100644 index 000000000..1df22b250 --- /dev/null +++ b/ja/install-methods/boot-usb-files.xml @@ -0,0 +1,208 @@ +<?xml version="1.0" encoding="EUC-JP"?> +<!-- retain these comments for translator revision tracking --> +<!-- original version: 25496 --> + + <sect1 condition="bootable-usb" id="boot-usb-files"> + <title>USB メモリスティックでの起動用ファイルの準備</title> + +<para> + +<!-- +For preparing the USB stick you will need a system where GNU/Linux is +already running and where USB is supported. You should ensure that the +usb-storage kernel module is loaded (<userinput>modprobe +usb-storage</userinput>) and try to find out which SCSI device the USB +stick has been mapped to (in this example +<filename>/dev/sda</filename> is used). To write to your stick, you +will probably have to turn off its write protection switch. +--> +USB スティックの準備のため、 +GNU/Linux が既に動いていて、USB をサポートしているシステムが必要になります。 +usb-storage カーネルモジュールをロードするのを保証し +(<userinput>modprobe usb-storage</userinput>)、 +USB スティックをマッピングしているのがどの SCSI デバイスかを検出してみるべきです。 +(この例では <filename>/dev/sda</filename> を使用します) +おそらく USB スティックに書き込むために、 +ライトプロテクトスイッチを切らなければなりません。 + +</para><para> + +<!-- +Note, that the USB stick should be at least 128 MB in size (smaller +setups are possible if you follow <xref linkend="usb-copy-flexible"/>). +--> +USB スティックは少なくとも 128 MB のサイズがなければなりません +(<xref linkend="usb-copy-flexible"/> のようにすれば、 +より小さなセットアップが可能です)。 + +</para> + + <sect2 id="usb-copy-easy"> + <title>ファイルのコピー — 簡単な方法</title> +<para arch="i386"> + +<!-- +There is an all-in-one file <filename>hd-media/boot.img.gz</filename> +which contains all the installer files (including the kernel) as well +as <command>SYSLINUX</command> and its configuration file. You only +have to extract it directly to to your USB stick: +--> +<command>SYSLINUX</command> や その設定ファイルと同様に、 +(カーネルを含む) インストーラの全ファイルが入った +<filename>hd-media/boot.img.gz</filename> という +オールインワンファイルがあります。 +以下のように USB スティックに直接展開してください。 + +<informalexample><screen> +# gzip -dc boot.img.gz > /dev/<replaceable>sda</replaceable> +</screen></informalexample> + +<!-- +Of course this will destroy anything already on the device, so take +care that you use the correct device name for your USB stick. +--> +もちろんこれはデバイス上の既存データを破壊しますので、 +正しい USB スティックのデバイス名を使用するよう注意してください。 + +</para><para arch="powerpc"> + +<!-- +There is an all-in-one file <filename>hd-media/boot.img.gz</filename> +which contains all the installer files (including the kernel) as well +as <command>yaboot</command> and its configuration file. Create a +partition of type "Apple_Bootstrap" on your USB stick using +<command>mac-fdisk</command>'s <userinput>C</userinput> command and +extract the image directly to that: +--> +<command>yaboot</command> や その設定ファイルと同様に、 +(カーネルを含む) インストーラの全ファイルが入った +<filename>hd-media/boot.img.gz</filename> という +オールインワンファイルがあります。 +<command>mac-fdisk</command> の <userinput>C</userinput> コマンドで +USB スティックに "Apple_Bootstrap" タイプパーティションを作成し、 +以下のように USB スティックに直接展開してください。 + +<informalexample><screen> +# gzip -dc boot.img.gz > /dev/<replaceable>sda2</replaceable> +</screen></informalexample> + +<!-- +Of course this will destroy anything already on the device, so take +care that you use the correct device name for your USB stick. +--> +もちろんこれはデバイス上の既存データを破壊しますので、 +正しい USB スティックのデバイス名を使用するよう注意してください。 + +</para><para> + +<!-- +After that, mount the USB memory stick (<userinput>mount +<replaceable arch="i386">/dev/sda</replaceable> +<replaceable arch="powerpc">/dev/sda2</replaceable> +/mnt</userinput>), which will now have +<phrase arch="i386">a FAT filesystem</phrase> +<phrase arch="powerpc">an HFS filesystem</phrase> +on it, and copy a Debian netinst or businesscard ISO image to it. +Please note that the file name must end in <filename>.iso</filename>. +Unmount the stick (<userinput>umount /mnt</userinput>) and you are done. +--> +その後、USB メモリスティック +(<phrase arch="i386">FAT ファイルシステム</phrase> +<phrase arch="powerpc">HFS ファイルシステム</phrase>になっている) をマウントし +(<userinput>mount <replaceable arch="i386">/dev/sda</replaceable> +<replaceable arch="powerpc">/dev/sda2</replaceable> +/mnt</userinput>)、 +そこに Debian netinst か、名刺型 ISO イメージをコピーしてください。 +ファイル名は <filename>.iso</filename> で終わっていなければならないことに +注意してください。 +終わったら、USB スティックをアンマウントしてください +(<userinput>umount /mnt</userinput>)。 + +</para> + </sect2> + + <sect2 id="usb-copy-flexible"> + <title>ファイルのコピー — 柔軟な方法</title> +<para> + +<!-- +If you like more flexibility or just want to know what's going on, you +should use the following method to put the files on your stick. +--> +もっと柔軟なものがよかったり、何が起きているか知りたいのなら、 +以下に説明する USB スティックにファイルを置く方法を使用すべきです。 + +</para> + +&usb-setup-i386.xml; +&usb-setup-powerpc.xml; + + <sect3> + <title>ISO イメージの追加</title> +<para> + +<!-- +Now you should put any Debian ISO image (businesscard, netinst or even +a full one) onto your stick (if it fits). The file name of such an +image must end in <filename>.iso</filename>. +--> +今度は、Debian ISO イメージ (名刺、netinst、完全版) を、 +USB スティックに (入るならば) 入れましょう。 +ISO イメージのファイル名は <filename>.iso</filename> +で終わっていなければなりません。 + +</para><para> + +<!-- +If you want to install over the network, without using an ISO image, +you will of course skip the previous step. Moreover you will have to +use the initial ramdisk from the <filename>netboot</filename> +directory instead of the one from <filename>hd-media</filename>, +because <filename>hd-media/initrd.gz</filename> does not have network +support. +--> +ISO イメージを使わずネットワーク越しにインストールしたければ、 +もちろん前の手順をスキップしてください。 +さらに、<filename>hd-media/initrd.gz</filename> +はネットワークをサポートしないので、 +<filename>hd-media</filename> のものの代わりに、 +<filename>netboot</filename> ディレクトリにある +初期 RAM ディスクを使わなければならないでしょう。 + +</para><para> + +<!-- +When you are done, unmount the USB memory stick (<userinput>umount +/mnt</userinput>) and activate its write protection switch. +--> +終わったら、USB メモリスティックをアンマウントし +(<userinput>umount /mnt</userinput>)、 +ライトプロテクトスイッチを有効にしてください。 + +</para> + </sect3> + + <!-- TODO: doesn't this section belong later? --> + <sect3 arch="i386"> + <title>USB スティックからの起動</title> +<warning><para> + +<!-- +If your system refuses to boot from the memory stick, the stick may +contain an invalid master boot record (MBR). To fix this, use the +<command>install-mbr</command> command from the package +<classname>mbr</classname>: +--> +システムがメモリスティックから起動できなければ、 +このスティックには無効なマスターブートレコード (MBR) があります。 +これを修正するために、<classname>mbr</classname> パッケージの +<command>install-mbr</command> コマンドを次のように使用してください。 + +<informalexample><screen> +# install-mbr /dev/<replaceable>sda</replaceable> +</screen></informalexample> + +</para></warning> + </sect3> + </sect2> + </sect1> |