diff options
author | Joey Hess <joeyh@debian.org> | 2005-10-07 19:51:38 +0000 |
---|---|---|
committer | Joey Hess <joeyh@debian.org> | 2005-10-07 19:51:38 +0000 |
commit | 1ea73eea5ecc6a8ed901316049259aee737ee554 (patch) | |
tree | 03a077f0b1b1548f3c806bd1c5795964fba0fb52 /ja/boot-installer/mips.xml | |
download | installation-guide-1ea73eea5ecc6a8ed901316049259aee737ee554.zip |
move manual to top-level directory, split out of debian-installer package
Diffstat (limited to 'ja/boot-installer/mips.xml')
-rw-r--r-- | ja/boot-installer/mips.xml | 147 |
1 files changed, 147 insertions, 0 deletions
diff --git a/ja/boot-installer/mips.xml b/ja/boot-installer/mips.xml new file mode 100644 index 000000000..8bc99a65f --- /dev/null +++ b/ja/boot-installer/mips.xml @@ -0,0 +1,147 @@ +<?xml version="1.0" encoding="EUC-JP"?> +<!-- retain these comments for translator revision tracking --> +<!-- original version: 24663 --> + + + <sect2 arch="mips" id="boot-tftp"><title>TFTP での起動</title> + + <sect3> + <title>SGI Indy の TFTP での起動</title> +<para> + +<!-- +After entering the command monitor use +--> +SGI Indy では、コマンドモニタに入ったところで + +<informalexample><screen> +bootp(): +</screen></informalexample> + +<!-- +on SGI Indys to boot linux and to begin installation of the Debian +Software. In order to make this +work you may have to unset the <envar>netaddr</envar> environment +variable. Type +--> +と入力すれば、linux が起動して Debian ソフトウェアのインストールが始まります。 +インストーラを正しく動作させるには、 +環境変数 <envar>netaddr</envar> の設定を解除しなければならないこともあります。 +これにはコマンドモニタから + +<informalexample><screen> +unsetenv netaddr +</screen></informalexample> + +<!-- +in the command monitor to do this. +--> +とします。 + +</para> + </sect3> + + <sect3> + <title>Broadcom BCM91250A の TFTP での起動</title> +<para> + +<!-- +On the Broadcom BCM91250A evaluation board, you have to load the SiByl boot +loader via TFTP which will then load and start the Debian installer. In +most cases, you will first obtain an IP address via DHCP but it is also +possible to configure a static address. In order to use DHCP, you can +enter the following command on the CFE prompt: +--> +Broadcom BCM91250A 評価ボードでは、Debian インストーラをロードし起動するのに、 +SiByl ブートローダを TFTP 経由でロードしなければなりません。 +ほとんどの場合、始めに IP アドレスを DHCP 経由で取得しますが、 +静的アドレスを設定することも可能です。 +DHCP を使用するためには、CFE プロンプトで以下のコマンドを入力します。 + +<informalexample><screen> +ifconfig eth0 -auto +</screen></informalexample> + +<!-- +Once you have obtained an IP address, you can load SiByl with the following +command: +--> +いったん IP アドレスを取得したら、以下のコマンドで SiByl をロードできます。 + +<informalexample><screen> +boot 192.168.1.1:/boot/sibyl +</screen></informalexample> + +<!-- +You need to substitute the IP address listed in this example with either +the name or the IP address of your TFTP server. Once you issue this +command, the installer will be loaded automatically. +--> +この例の IP アドレスを、使用する TFTP サーバの名前や IP アドレスで +置き換える必要があります。 +いったんこのコマンドを発行すると、インストーラは自動でロードされます。 + +</para> +</sect3> + </sect2> + + <sect2 arch="mips"><title>ブートパラメータ</title> + + <sect3> + <title>SGI Indy の TFTP での起動</title> +<para> + +<!-- +On SGI Indys you can append boot parameters to the +<command>bootp():</command> command in the command monitor. +--> +SGI Indy では、コマンドモニタの +<command>bootp():</command> コマンドにブートパラメータを追加します。 + +</para><para> + +<!-- +Following the <command>bootp():</command> command you can give the +path and name of the file to boot if you did not give an explicit name +via your bootp/dhcp server. Example: +--> +bootp/dhcp サーバの方から名前を与えていない場合は、 +<command>bootp():</command> の後に +起動させるファイルのパスと名前を与えることが可能です。 +例: + +<informalexample><screen> +bootp():/boot/tftpboot.img +</screen></informalexample> + +<!-- +Further kernel parameters can be passed via <command>append</command>: +--> +さらにカーネルパラメータは <command>append</command> を通して渡せます: + +<informalexample><screen> +bootp(): append="root=/dev/sda1" +</screen></informalexample> + +</para> + </sect3> + + <sect3> + <title>Broadcom BCM91250A の TFTP での起動</title> +<para> + +<!-- +You cannot pass any boot parameters directly from the CFE prompt. Instead, +you have to edit the <filename>/boot/sibyl.conf</filename> file on the TFTP +server and add your parameters to the <replaceable>extra_args</replaceable> +variable. +--> +CFE プロンプトからは、どんなブートパラメータも直接渡せません。 +その代わり、 +TFTP サーバの <filename>/boot/sibyl.conf</filename> ファイルを編集し、 +パラメータを <replaceable>extra_args</replaceable> に追加する必要があります。 + +</para> + </sect3> + + </sect2> |