Remove untranslated and obsolete files for the Basque translation

1 files changed, 0 insertions, 198 deletions

diff --git a/eu/preparing/non-debian-partitioning.xml b/eu/preparing/non-debian-partitioning.xml
deleted file mode 100644
index f57b02847..000000000
--- a/eu/preparing/non-debian-partitioning.xml
+++ /dev/null
@@ -1,198 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 12756 untranslated -->
-
- <sect1 id="non-debian-partitioning">
- <title>Pre-Partitioning for Multi-Boot Systems</title>
-<para>
-
-Partitioning your disk simply refers to the act of breaking up your
-disk into sections. Each section is then independent of the others.
-It's roughly equivalent to putting up walls inside a house; if you add
-furniture to one room it doesn't affect any other room.
-
-</para><para arch="s390">
-
-Whenever this section talks about ``disks'' you should translate this
-into a DASD or VM minidisk in the &arch-title; world. Also a machine means
-an LPAR or VM guest in this case.
-
-</para><para>
-
-If you already have an operating system on your system
-
-<phrase arch="x86">
-(Windows 9x, Windows NT/2000/XP, OS/2, MacOS, Solaris, FreeBSD, &hellip;)
-</phrase>
-
-<phrase arch="alpha">
-(Tru64 (Digital UNIX), OpenVMS, Windows NT, FreeBSD, &hellip;)
-</phrase>
-
-<phrase arch="s390">
-(VM, z/OS, OS/390, &hellip;)
-</phrase>
-
-and want to stick Linux on the same disk, you will need to repartition
-the disk. Debian requires its own hard disk partitions. It cannot be
-installed on Windows or MacOS partitions. It may be able to share some
-partitions with other Linux systems, but that's not covered here. At
-the very least you will need a dedicated partition for the Debian
-root.
-
-</para><para>
-
-You can find information about your current partition setup by using
-a partitioning tool for your current operating system
-
-<phrase arch="x86">, such as fdisk or PartitionMagic</phrase>
-
-<phrase arch="powerpc">, such as Drive Setup, HD Toolkit, or MacTools</phrase>
-
-<phrase arch="m68k">, such as HD SC Setup, HDToolBox, or SCSITool</phrase>
-
-<phrase arch="s390">, such as the VM diskmap</phrase>
-
-. Partitioning tools always provide a way to show existing partitions
-without making changes.
-
-</para><para>
-
-In general, changing a partition with a file system already on
-it will destroy any information there. Thus you should always make
-backups before doing any repartitioning.  Using the analogy of the
-house, you would probably want to move all the furniture out of the
-way before moving a wall or you risk destroying it.
-
-<phrase arch="x86"> Luckily, there is an alternative for some users; see 
-<xref linkend="lossless"/>. </phrase>
-</para>
-
-<para arch="hppa" condition="FIXME">
-
-<emphasis>FIXME: write about HP-UX disks?</emphasis>
-
-</para><para>
-
-If your computer has more than one hard disk, you may want to dedicate
-one of the hard disks completely to Debian. If so, you don't need to
-partition that disk before booting the installation system; the
-installer's included partitioning program can handle the job nicely.
-
-</para><para>
-
-If your machine has only one hard disk, and you would like to
-completely replace the current operating system with &debian;,
-you also can wait to partition as part of the installation process
-(<xref linkend="partman"/>), after you have booted the
-installation system.  However this only works if you plan to boot the
-installer system from tapes, CD-ROM or files on a connected machine.
-Consider: if you boot from files placed on the hard disk, and then
-partition that same hard disk within the installation system, thus
-erasing the boot files, you'd better hope the installation is
-successful the first time around.  At the least in this case, you
-should have some alternate means of reviving your machine like the
-original system's installation tapes or CDs.
-
-</para><para>
-
-If your machine already has multiple partitions, and enough space can
-be provided by deleting and replacing one or more of them, then you
-too can wait and use the Debian installer's partitioning program. You
-should still read through the material below, because there may be
-special circumstances like the order of the existing partitions within
-the partition map, that force you to partition before installing
-anyway.
-
-</para><para>
-
-In all other cases, you'll need to partition your hard disk before
-starting the installation to create partitionable space for
-Debian. If some of the partitions will be owned by other operating
-systems, you should create those partitions using native operating
-system partitioning programs. We recommend that you do
-<emphasis>not</emphasis> attempt to create Debian Linux partitions
-using another operating system's tools. Instead, you should just
-create the native operating system's partitions you will want to
-retain.
-
-</para><para>
-
-If you are going to install more than one operating system on the same
-machine, you should install all other system(s) before proceeding with
-Linux installation. Windows and other OS installations may destroy
-your ability to start Linux, or encourage you to reformat non-native
-partitions.
-
-</para><para>
-
-You can recover from these actions or avoid them, but installing
-the native system first saves you trouble.
-
-</para><para arch="powerpc">
-
-In order for OpenFirmware to automatically boot &debian; the Linux
-partitions should appear before all other partitions on the disk,
-especially MacOS boot partitions. This should be kept in mind when
-pre-partitioning; you should create a Linux placeholder partition to
-come <emphasis>before</emphasis> the other bootable partitions on the
-disk. (The small partitions dedicated to Apple disk drivers are not
-bootable.) You can delete the placeholder with the Linux partition
-tools later during the actual install, and replace it with Linux
-partitions.
-
-</para><para>
-
-If you currently have one hard disk with one partition (a common setup
-for desktop computers), and you want to multi-boot the native
-operating system and Debian, you will need to:
-
-  <orderedlist>
-<listitem><para>
-
-Back up everything on the computer.
-
-</para></listitem>
-<listitem><para>
-
-Boot from the native operating system installer media such as CD-ROM
-or tapes.
-
-<phrase arch="powerpc">When booting from a MacOS CD, hold the
-<keycap>c</keycap> key while 
-booting to force the CD to become the active MacOS system.</phrase>
-
-</para></listitem>
-<listitem><para>
-
-Use the native partitioning tools to create native system
-partition(s). Leave either a place holder partition or free space for
-&debian;.
-
-</para></listitem>
-<listitem><para>
-
-Install the native operating system on its new partition.
-
-</para></listitem>
-<listitem><para>
-
-Boot back into the native system to verify everything's OK,
-    and to download the Debian installer boot files.
-
-</para></listitem>
-<listitem><para>
-
-Boot the Debian installer to continue installing Debian.
-
-</para></listitem>
-</orderedlist>
-
-</para>
-
-&nondeb-part-alpha.xml; 
-&nondeb-part-x86.xml; 
-&nondeb-part-m68k.xml; 
-&nondeb-part-sparc.xml; 
-&nondeb-part-powerpc.xml;
-
- </sect1>