diff options
author | Joey Hess <joeyh@debian.org> | 2005-10-07 19:51:38 +0000 |
---|---|---|
committer | Joey Hess <joeyh@debian.org> | 2005-10-07 19:51:38 +0000 |
commit | 1ea73eea5ecc6a8ed901316049259aee737ee554 (patch) | |
tree | 03a077f0b1b1548f3c806bd1c5795964fba0fb52 /eu/boot-installer/arm.xml | |
download | installation-guide-1ea73eea5ecc6a8ed901316049259aee737ee554.zip |
move manual to top-level directory, split out of debian-installer package
Diffstat (limited to 'eu/boot-installer/arm.xml')
-rw-r--r-- | eu/boot-installer/arm.xml | 109 |
1 files changed, 109 insertions, 0 deletions
diff --git a/eu/boot-installer/arm.xml b/eu/boot-installer/arm.xml new file mode 100644 index 000000000..fadc600e3 --- /dev/null +++ b/eu/boot-installer/arm.xml @@ -0,0 +1,109 @@ +<!-- retain these comments for translator revision tracking --> +<!-- original version: 11648 untranslated --> + + <sect2 arch="arm" id="boot-tftp"><title>Booting from TFTP</title> + +&boot-installer-intro-net.xml; + + <sect3 arch="arm"><title>Booting from TFTP on NetWinder</title> + +<para> + +NetWinders have two network interfaces: The 10Mbps NE2000-compatible +card is <filename>eth0</filename> and the 100Mbps Tulip card is +<filename>eth1</filename>. + +</para><note><para> + +You need NeTTrom 2.2.1 or later to boot the +installation system. NeTTrom 2.3.3 is recommended: get these files +from +<ulink url="ftp://ftp.netwinder.org/pub/netwinder/firmware/"></ulink>: +<itemizedlist> +<listitem><para> + +<filename>nettrom-2.3-3.armv4l.rpm</filename> + +</para></listitem> +<listitem><para> + +<filename>nettrom-2.3.3.bin</filename> + +</para></listitem> +<listitem><para> + +<filename>nettrom-2.3.3.bin.md5sum</filename> + +</para></listitem> +</itemizedlist> + +</para></note><para> + +After rebooting and interrupting the boot process during the countdown, you +must first configure the network either with a static address: +<informalexample><screen> + + NeTTrom command-> setenv eth0_ip 192.168.0.10/24 + +</screen></informalexample> +where 24 is the number of set bits in the netmask, or a dynamic address: +<informalexample><screen> + + NeTTrom command-> boot diskless + +</screen></informalexample> + +</para><para> + +You may also need to configure the <userinput>route1</userinput> +settings if the TFTP +server is not on the local subnet. The rest of the config is pretty +standard (the save-all step is optional): +<informalexample><screen> + + NeTTrom command-> setenv kerntftpserver 192.168.0.1 + NeTTrom command-> setenv kerntftpfile tftpboot.img + NeTTrom command-> save-all + NeTTrom command-> setenv netconfig_eth0 flash + NeTTrom command-> setenv kernconfig tftp + +</screen></informalexample> + +</para><para> + +Only the last two of these interfere with normal disk booting, so it is +safe to <command>save-all</command> right before it, which will +store the network settings in case you need to boot from the network +again. Use the <command>printenv</command> command to review your +environment settings. Finally, if your <envar>cmdappend</envar> +NeTTrom variable has the <option>noinitrd</option> option (which is +necessary to boot 2.4 kernels), you must remove it so the downloaded +kernel can boot with its attached ramdisk. + +</para> + </sect3> + + <sect3 arch="arm"><title>Booting from TFTP on CATS</title> + +<para> + +On CATS machines, use <command>boot de0:</command> or similar at the +Cyclone prompt. + +</para> + </sect3> + </sect2> + + + + <sect2 arch="arm"><title>Booting from CD-ROM</title> + +&boot-installer-intro-cd.xml; + +<para> + +To boot a CD-ROM from the Cyclone console prompt, use the command +<command>boot cd0:cats.bin</command> + +</para> + </sect2> |