diff options
author | Frans Pop <elendil@planet.nl> | 2009-08-22 15:52:14 +0000 |
---|---|---|
committer | Frans Pop <elendil@planet.nl> | 2009-08-22 15:52:14 +0000 |
commit | 325e7229b079ce8367df7a7571aad8bfc8e1e5a9 (patch) | |
tree | ef067b19e0513da5d71136e123a5ee504ccc9f58 /da/boot-installer/x86.xml | |
parent | e5895f1749ea5e3dbad24341018333d101e53685 (diff) | |
download | installation-guide-325e7229b079ce8367df7a7571aad8bfc8e1e5a9.zip |
Remove all untranslated documents for Danish
Diffstat (limited to 'da/boot-installer/x86.xml')
-rw-r--r-- | da/boot-installer/x86.xml | 426 |
1 files changed, 0 insertions, 426 deletions
diff --git a/da/boot-installer/x86.xml b/da/boot-installer/x86.xml deleted file mode 100644 index 4aafec5c2..000000000 --- a/da/boot-installer/x86.xml +++ /dev/null @@ -1,426 +0,0 @@ -<!-- retain these comments for translator revision tracking --> -<!-- original version: 22664 untranslated --> - - <sect2 arch="x86"><title>Booting from a CD-ROM</title> - -&boot-installer-intro-cd.xml; - -<!-- We'll comment the following section until we know exact layout --> -<!-- -CD #1 of official Debian CD-ROM sets for &arch-title; will present a -<prompt>boot:</prompt> prompt on most hardware. Press -<keycap>F3</keycap> to see the list of kernel options available -from which to boot. Just type your chosen flavor name (idepci, -vanilla, compact, bf24) at the <prompt>boot:</prompt> prompt -followed by &enterkey;. - -</para><para> - -If your hardware doesn't support booting of multiple images, put one -of the other CDs in the drive. It appears that most SCSI CD-ROM drives -do not support <command>isolinux</command> multiple image booting, so users -with SCSI CD-ROMs should try either CD2 (vanilla) or CD3 (compact), -or CD5 (bf2.4). - -</para><para> - -CD's 2 through 5 will each boot a -different ``flavor'' depending on which CD-ROM is -inserted. See <xref linkend="kernel-choice"/> for a discussion of the -different flavors. Here's how the flavors are laid out on the -different CD-ROMs: - -<variablelist> -<varlistentry> -<term>CD 1</term><listitem><para> - -Allows a selection of kernel images to boot from (the idepci flavor is -the default if no selection is made). - -</para></listitem></varlistentry> -<varlistentry> -<term>CD 2</term><listitem><para> - -Boots the `vanilla' flavor. - -</para></listitem></varlistentry> -<varlistentry> -<term>CD 3</term><listitem><para> - -Boots the `compact' flavor. - -</para></listitem></varlistentry> -<varlistentry> -<term>CD 4</term><listitem><para> - -Boots the `idepci' flavor. - -</para></listitem></varlistentry> -<varlistentry> -<term>CD 5</term><listitem><para> - -Boots the `bf2.4' flavor. - -</para></listitem></varlistentry> - - </variablelist> - -</para><para> - ---> - - </sect2> - -<!-- FIXME the documented procedure does not exactly work, commented out - until fixes - - <sect2 arch="x86" id="install-from-dos"> - <title>Booting from a DOS partition</title> - -&boot-installer-intro-hd.xml; - -<para> - -Boot into DOS (not Windows) without any drivers being loaded. To do -this, you have to press <keycap>F8</keycap> at exactly the right -moment (and optionally select the `safe mode command prompt only' -option). Enter the subdirectory for the flavor you chose, e.g., - -<informalexample><screen> - -cd c:\install - -</screen></informalexample>. - -Next, execute <command>install.bat</command>. -The kernel will load and launch the installer system. - -</para><para> - -Please note, there is currently a loadlin problem (#142421) which -precludes <filename>install.bat</filename> from being used with the -bf2.4 flavor. The symptom of the problem is an -<computeroutput>invalid compressed format</computeroutput> error. - -</para> - </sect2> - -END FIXME --> - - <sect2 arch="x86" id="boot-initrd"> - <title>Booting from linux using <command>LILO</command> or - <command>GRUB</command></title> - -<para> -To boot the installer from hard disk, you must first download -and place the needed files as described in <xref linkend="boot-drive-files"/>. -</para> - -<para> -If you intend to use the hard drive only for booting and then -download everything over the network, you should download the -<filename>netboot/debian-installer/i386/initrd.gz</filename> file and its corresponding kernel. -This will allow you -to repartition the hard disk from which you boot the installer, although -you should do so with care. -</para> - -<para> -Alternatively, if you intend to keep an existing partition on the hard -drive unchanged during the install, you can download the -<filename>hd-media/initrd.gz</filename> -file and its kernel, as well as copy a CD iso to the drive (make sure the -file is named ending in ".iso". The installer can then boot from the drive -and install from the CD image, without needing the network. -</para> - -<para> -For <command>LILO</command>, you will need to configure two -essential things in <filename>/etc/lilo.conf</filename>: -<itemizedlist> -<listitem><para> - -to load the <filename>initrd.gz</filename> installer at boot time; - -</para></listitem> -<listitem><para> - -have the <filename>vmlinuz</filename> kernel use a RAM disk as -its root partition. - -</para></listitem> -</itemizedlist> - -Here is a <filename>/etc/lilo.conf</filename> example: - -</para><para> - -<informalexample><screen> - -image=/boot/newinstall/vmlinuz - label=newinstall - initrd=/boot/newinstall/initrd.gz - root=/dev/ram - append="devfs=mount,dall ramdisk_size=17000 - -</screen></informalexample> - -For more details, refer to the -<citerefentry><refentrytitle>initrd</refentrytitle> -<manvolnum>4</manvolnum></citerefentry> and -<citerefentry><refentrytitle>lilo.conf</refentrytitle> -<manvolnum>5</manvolnum></citerefentry> man pages. Now run -<userinput>lilo</userinput> and reboot. - -</para><para> - -The procedure for <command>GRUB</command> is quite similar. Locate your -<filename>menu.lst</filename> in the <filename>/boot/grub/</filename> -directory (sometimes in the <filename>/boot/boot/grub/</filename>), -add the following lines: - -<informalexample><screen> - -title New Install -kernel (hd0,0)/boot/newinstall/vmlinuz root=/dev/ram devfs=mount,dall ramdisk_size=17000 -initrd (hd0,0)/boot/newinstall/initrd.gz - -</screen></informalexample> - -and reboot. Note that the value of the <userinput>ramdisksize</userinput> -may need to be adjusted for the size of the initrd image. -From now on, there should be no difference between <command>GRUB</command> -or <command>LILO</command>. - -</para> - </sect2> - - <sect2 arch="x86" id="usb-boot"> - <title>Booting from USB memory stick</title> -<para> - -Lets assume you have prepared everything from <xref -linkend="boot-dev-select"/> and <xref linkend="boot-usb-files"/>. Now -just plug your USB stick into some free USB connector and reboot the -computer. The system should boot up, and you should be presented with -the <prompt>boot:</prompt> prompt. Here you can enter optional boot -arguments, or just hit &enterkey;. - -</para><para> - -In case your computer doesn't support booting from USB memory devices, -you can still use a single floppy to do the initial boot and then -switch to USB. Boot your system as described in <xref linkend="floppy-boot"/>; -the kernel on the boot floppy should detect your USB stick automatically. -When it asks for the root floppy, simply press &enterkey;. You should see -&d-i; starting. - -</para> - </sect2> - - <sect2 arch="x86" id="floppy-boot"> - <title>Booting from Floppies</title> -<para> - -You will have already downloaded the floppy images you needed and -created floppies from the images in <xref linkend="create-floppy"/>. -<!-- missing-doc FIXME If you need to, you can also modify the boot floppy; see -<xref linkend="rescue-replace-kernel"/>. --> - -</para><para> - -To boot from the installer boot floppy, place it in the primary floppy -drive, shut down the system as you normally would, then turn it back -on. - -</para><para> - -For installing from a LS-120 drive (ATAPI version) with a set of -floppies, you need to specify the virtual location for the floppy -device. This is done with the <emphasis>root=</emphasis> boot -argument, giving the device that the ide-floppy driver maps the device -to. For example, if your LS-120 drive is connected as the first IDE -device (master) on the second cable, you enter -<userinput>linux root=/dev/hdc</userinput> at the boot prompt. -Installation from LS-120 is only supported by 2.4 and later kernels. - -</para><para> - -Note that on some machines, <keycombo><keycap>Control</keycap> -<keycap>Alt</keycap> <keycap>Delete</keycap></keycombo> does not -properly reset the machine, so a ``hard'' reboot is recommended. If -you are installing from an existing operating system (e.g., from a DOS -box) you don't have a choice. Otherwise, please do a hard reboot when -booting. - -</para><para> - -The floppy disk will be accessed, and you should then see a screen -that introduces the boot floppy and ends with the <prompt>boot:</prompt> -prompt. - -</para><para> - -Once you press &enterkey;, you should see the message -<computeroutput>Loading...</computeroutput>, followed by -<computeroutput>Uncompressing Linux...</computeroutput>, and -then a screenful or so of information about the hardware in your -system. More information on this phase of the boot process can be -found below in <xref linkend="kernel-msgs"/>. - -</para><para> - -After booting from the boot floppy, the root floppy is -requested. Insert the root floppy and press &enterkey;, and the -contents are loaded into memory. The installer program -<command>debian-installer</command> is automatically launched. - -</para> - </sect2> - - <sect2 arch="x86" id="boot-tftp"><title>Booting with TFTP</title> - -&boot-installer-intro-net.xml; - -<para> - -There are various ways to do a TFTP boot on i386. - -</para> - - <sect3><title>NIC or Motherboard that support PXE</title> -<para> - -It could be that your Network Interface Card or Motherboard provides -PXE boot functionality. -This is a <trademark class="trade">Intel</trademark> re-implemention -of TFTP boot. If so you may be able to configure your BIOS to boot from the -network. - -</para> - </sect3> - - <sect3><title>NIC with network bootROM</title> -<para> - -It could be that your Network Interface Card provides -TFTP boot functionality. - -</para><para condition="FIXME"> - -Let us (<email>&email-debian-boot-list;</email>) know how did you manage it. -Please refer to this document. - -</para> - </sect3> - - <sect3><title>Etherboot</title> -<para> - -The <ulink url="http://www.etherboot.org">etherboot project</ulink> -provides bootdiskettes and even bootroms that do a TFTPboot. - -</para> - </sect3> - </sect2> - - <sect2 arch="x86"><title>i386 Boot Parameters</title> -<para> - -When the installer boots, you will be presented with the boot prompt, -<prompt>boot:</prompt>. You can do two things at the <prompt>boot:</prompt> -prompt. You can press the function keys <keycap>F1</keycap> through -<keycap>F10</keycap> to view a few pages of helpful information, or -you can press <keycap>Enter</keycap> to boot the system. - -</para><para> - -Information on boot parameters which might be useful can be found by -pressing <keycap>F3</keycap> through <keycap>F7</keycap>. If you add any -parameters to -the boot command line, be sure to type the boot method (the default is -<userinput>linux</userinput>) and a space before the first parameter (e.g., -<userinput>linux floppy=thinkpad</userinput>). If you simply press &enterkey;, -that's the same as typing <userinput>linux</userinput> without any special -parameters. - -</para><para> - -Some systems have floppies with ``inverted DCLs''. If you receive -errors reading from the floppy, even when you know the floppy is good, -try the parameter <userinput>floppy=thinkpad</userinput>. - -</para><para> - -On some systems, such as the IBM PS/1 or ValuePoint (which have ST-506 -disk drivers), the IDE drive may not be properly recognized. Again, -try it first without the parameters and see if the IDE drive is -recognized properly. If not, determine your drive geometry -(cylinders, heads, and sectors), and use the parameter -<userinput>hd=<replaceable>cylinders</replaceable>,<replaceable>heads</replaceable>,<replaceable>sectors</replaceable></userinput>. - -</para><para> - -If you have a very old machine, and the kernel hangs after saying -<computeroutput>Checking 'hlt' instruction...</computeroutput>, then -you should try the <userinput>no-hlt</userinput> boot argument, which -disables this test. - -</para><para> - -If your screen begins to show a weird picture while the kernel boots, -eg. pure white, pure black or colored pixel garbage, your system may -contain a problematic video card which does not switch to the -framebuffer mode properly. Then you can use the boot parameter -<userinput>debian-installer/framebuffer=false</userinput> or -<userinput>video=vga16:off</userinput> to disable the framebuffer -console. Only the english -language will be available during the installation due to limited -console features. See <xref linkend="boot-parms"/> for details. - -</para> - </sect2> - - - <sect2 arch="x86"> - <title>System freeze during the PCMCIA configuration phase</title> - -<para> - -Some laptop models produced by Dell are known to crash when PCMCIA device -detection tries to access some hardware addresses. Other laptops may display -similar problems. If you experience such a problem and you don't need PCMCIA -support during the installation, you can disable PCMCIA using the -<userinput>hw-detect/start_pcmcia=false</userinput> boot parameter. You can -then configure PCMCIA after the installation is completed and exclude the -resource range causing the problems. - -</para><para> - -Alternatively, you can boot the installer in expert mode. You will -then be asked to enter the resource range options your hardware -needs. For example, if you have one of the Dell laptops mentioned -above, you should enter <userinput>exclude port -0x800-0x8ff</userinput> here. There is also a list of some common -resource range options in the <ulink -url="http://pcmcia-cs.sourceforge.net/ftp/doc/PCMCIA-HOWTO-2.html#ss2.5">System -resource settings section of the PCMCIA HOWTO</ulink>. Note that you -have to omit the commas, if any, when you enter this value in the -installer. - -</para> - </sect2> - - <sect2 arch="x86"> - <title>System freeze while loading the USB modules</title> -<para> - -The kernel normally tries to install USB modules and the USB keyboard driver -in order to support some non-standard USB keyboards. However, there are some -broken USB systems where the driver hangs on loading. A possible workaround -may be disabling the USB controller in your mainboard BIOS setup. Another option -is passing the <userinput>debian-installer/probe/usb=false</userinput> parameter -at the boot prompt, which will prevent the modules from being loaded. - -</para> - </sect2> |