Remove db2latex ('NextGeneration') build infratructure from trunk as it is not being developed further and not maintained; keep README.ng for reference

1 files changed, 0 insertions, 567 deletions

diff --git a/build/buildone_ng.sh b/build/buildone_ng.sh
deleted file mode 100755
index f45f6faa2..000000000
--- a/build/buildone_ng.sh
+++ /dev/null
@@ -1,567 +0,0 @@
-#!/bin/sh
-
-# Uncomment to debugging
-#set -x
-
-usage() {
-
-
-	sed 's/\ \ /\ /g' <<END
-
-Generate the Debian Installer Manual in several different formats
-
-Usage: $0 [params]
-
-[params] can be any combination of the following:
-
-- 'debug' to make debug output appear and skip removing old files
-- '--help' or 'help' to print this usage help
-- a language name (see below)
-- an architecture name (see below)
-- a file format (see below)
-- '-d <dir>' to produce output in the <dir>-directory
-- 'official' to build the official version of the manual
-
-Example: $0 ru en i386 sparc pdf
-
-Defaults: $default_language $default_format $default_arch
-
-Available languages: 		$LANGUAGES
-Available architectures: 	$ARCHS
-Available formats:		$FORMATS
-
-END
-
-exit 0
-
-
-}
-
-create_ProfiledXML () {
-
-	[ -x /usr/bin/xsltproc ] || return 9
-	
-	[ -f $tempdir/install.$cur_lang.profiled.xml ] && return
-	
-	entities_path="$build_path/entities"
-	source_path="$manual_path/$cur_lang"
-
-	if [ ! "$official_build" ]; then
-		unofficial_build="FIXME;unofficial-build"
-	else
-		unofficial_build=""
-	fi
-
-	. arch-options/$cur_arch
-
-# Join all architecture options into one big variable
-	condition="$fdisk;$network;$boot;$smp;$other;$goodies;$unofficial_build;$status"
-
-# Write dynamic non-profilable entities into the file
-	echo "<!-- arch- and lang-specific non-profilable entities -->" > $dynamic
-	echo "<!ENTITY langext \".$cur_lang\">" >> $dynamic
-	echo "<!ENTITY architecture \"$cur_arch\">" >> $dynamic
-	echo "<!ENTITY kernelversion \"${kernelversion}\">" >> $dynamic
-	echo "<!ENTITY altkernelversion \"${altkernelversion}\">" >> $dynamic
-	echo "<!ENTITY smp-config-section \"${smp_config_section}\">" >> $dynamic
-	echo "<!ENTITY smp-config-option \"${smp_config_option}\">" >> $dynamic
-	sed "s:##SRCPATH##:$source_path:" templates/docstruct.ent >> $dynamic
-
-	sed "s:##LANG##:$cur_lang:g" templates/install.xml.template | \
-		sed "s:##TEMPDIR##:$tempdir:g" | \
-		sed "s:##ENTPATH##:$entities_path:g" | \
-		sed "s:##SRCPATH##:$source_path:" > $tempdir/install.$cur_lang.xml
-
-# Create the profiled xml file
-	/usr/bin/xsltproc \
-		--xinclude \
-		--stringparam profile.arch "$archspec" \
-		--stringparam profile.condition "$condition" \
-		--output $tempdir/install.$cur_lang.profiled.xml \
-		$stylesheet_profile \
-		$tempdir/install.$cur_lang.xml > /dev/null 2>&1
-	RET=$?; [ $RET -ne 0 ] && return $RET
-
-	return 0
-}
-
-create_HTML () {
-
-	/usr/bin/xsltproc --xinclude \
-		--stringparam base.dir	"$tempdir/$cur_lang.$cur_arch.html/" \
-		$stylesheet_html \
-		"$tempdir/install.$cur_lang.profiled.xml" > /dev/null 2>&1
-
-	RET=$?; [ $RET -ne 0 ] && return $RET
-
-	output_files="$output_files $tempdir/$cur_lang.$cur_arch.html/"
-
-	return 0
-}
-
-create_SingleHTML () {
-
-	if [ ! -f  $tempdir/install.$cur_lang.html ]; then
-	
-	/usr/bin/xsltproc \
-		--xinclude \
-		--output $tempdir/install.$cur_lang.html \
-		$stylesheet_html_single \
-		$tempdir/install.${cur_lang}.profiled.xml
-
-	RET=$?; [ $RET -ne 0 ] && return $RET
-
-	mv $tempdir/install.$cur_lang.html $tempdir/install.$cur_lang.uncorr.html
-
-	# Replace some unprintable characters
-	
-	sed "s:–:-:g        # n-dash
-		 s:—:--:g       # m-dash
-		 s:“:\&quot;:g  # different types of quotes
-		 s:”:\&quot;:g
-		 s:„:\&quot;:g
-		 s:…:...:g      # ellipsis
-		 s:™: (tm):g    # trademark" \
-		$tempdir/install.$cur_lang.uncorr.html >$tempdir/install.$cur_lang.html
-
-	rm $tempdir/install.$cur_lang.uncorr.html
-
-	fi
-
-	output_files="$output_files $tempdir/install.$cur_lang.html"
-
-}
-
-create_Text () {
-
-    [ -x /usr/bin/w3m ] || return 9
-
-    # Set encoding for output file
-    case "$cur_lang" in
-        cs)
-            CHARSET=ISO-8859-2
-            ;;
-        ja)
-            CHARSET=EUC-JP
-            ;;
-        ru)
-            CHARSET=KOI8-R
-            ;;
-        *)
-            CHARSET=UTF-8
-            ;;
-    esac
-    
-    echo /usr/bin/w3m -dump $tempdir/install.$cur_lang.html \
-        -o display_charset=$CHARSET \
-        >$tempdir/install.$cur_lang.txt
-
-    /usr/bin/w3m -dump $tempdir/install.$cur_lang.html \
-        -o display_charset=$CHARSET \
-        >$tempdir/install.$cur_lang.txt
-
-    RET=$?; [ $RET -ne 0 ] && return $RET
-
-    output_files="$output_files $tempdir/install.${cur_lang}.txt"
-
-    return 0
-}
-
-create_JadeTeX () {
-	
-	[ -f  $tempdir/install.$cur_lang.tex ] && return
-	
-	
-    [ -x /usr/bin/openjade ] || return 9
-	
-    # And use openjade to generate a .tex file
-    export SP_ENCODING="utf-8"
-    /usr/bin/openjade -t tex \
-        -b utf-8 \
-        -o $tempdir/install.${cur_lang}.tex \
-        -d $stylesheet_dsssl \
-        -V tex-backend \
-        $tempdir/install.${cur_lang}.profiled.xml > /dev/null 2>&1
-    RET=$?
-    return $RET
-
-}
-
-create_JadeDVI () {
-    
-    [ -x /usr/bin/jadetex ] || return 9
-
-    # Next we use jadetext to generate a .dvi file
-    # This needs three passes to properly generate the index (page numbering)
-    cd $tempdir
-	echo -n "("
-    for PASS in 1 2 3 ; do
-		echo -n "$PASS"
-        /usr/bin/jadetex -interaction=batchmode install.${cur_lang}.tex >/dev/null
-#		RET=$?; [ $RET -ne 0 ] && break
-		[ "$PASS" -lt 3 ] && echo -n "-"
-    done
-	echo -n ") "
-    cd ..
-    return $RET
-}
-
-create_LaTeX () {
-
-	[ -f  $tempdir/install.$cur_lang.new.tex ] && return
-	
-    sed "s:##LANG##:$cur_lang:g" templates/driver.xsl.template > $tempdir/driver.xsl
-
-	xsltproc \
-		-o $tempdir/install.${cur_lang}.new.tex \
-		$tempdir/driver.xsl \
-		$tempdir/install.${cur_lang}.profiled.xml &> xsltproc.log
-	
-	RET=$?
-
-#	Japanese is different :(
-
-	if [ "$cur_lang" == "ja" ]; then
-		cat $tempdir/install.${cur_lang}.new.tex | \
-			sed 's/\\begin{document}/\\begin{document}\\begin{CJK*}\[dnp\]{JIS}{min}/g' | \
-			sed 's/\\end{document}/\\end{CJK*}\\end{document}/g' \
-			> $tempdir/install.${cur_lang}.new.tex.tmp
-		mv $tempdir/install.${cur_lang}.new.tex.tmp $tempdir/install.${cur_lang}.new.tex
-		recode -f UTF-8..EUC-JP $tempdir/install.${cur_lang}.new.tex
-	fi
-	
-    output_files="$output_files $tempdir/install.${cur_lang}.new.tex"
-
-	return $RET
-	
-
-}
-
-create_DVI () {
-
-	cd $tempdir
-	echo -n "("
-	for PASS in 1 2 3 ; do
-		echo -n "$PASS"
-		/usr/bin/latex -interaction=batchmode install.${cur_lang}.new.tex > /dev/null
-#		RET=$?; [ $RET -ne 0 ] && break
-		[ "$PASS" -lt 3 ] && echo -n "-"
-	done
-	echo -n ") "
-	cd ..
-
-}
-
-create_newPDF () {
-
-    cd $tempdir
-	echo -n "("
-    for PASS in 1 2 3 ; do
-		echo -n "$PASS"
-		/usr/bin/pdflatex -interaction=batchmode install.${cur_lang}.new.tex > /dev/null
-#        RET=$?; [ $RET -ne 0 ] && break
-		[ "$PASS" -lt 3 ] && echo -n "-"
-    done
-	echo -n ") "
-    cd ..
-	output_files="$output_files $tempdir/install.$cur_lang.new.pdf"
-    return $RET
-
-}
-
-create_newPS () {
-
-
-    /usr/bin/dvips -q $tempdir/install.${cur_lang}.new.dvi -o $tempdir/install.${cur_lang}.new.ps
-
-    RET=$?; [ $RET -ne 0 ] && return $RET
-    
-	output_files="$output_files $tempdir/install.${cur_lang}.new.ps"
-
-}
-
-create_PDF() {
-	
-    cd $tempdir
-	echo -n "("
-    for PASS in 1 2 3 ; do
-		echo -n "$PASS"
-		/usr/bin/pdfjadetex -interaction=batchmode install.${cur_lang}.tex > /dev/null
-        RET=$?; [ $RET -ne 0 ] && break
-		[ "$PASS" -lt 3 ] && echo -n "-"
-    done
-	echo -n ") "
-    cd ..
-	output_files="$output_files $tempdir/install.${cur_lang}.pdf"
-    return $RET
-}
-
-create_PS () {
-    
-    [ -x /usr/bin/dvips ] || return 9
-
-    /usr/bin/dvips -q $tempdir/install.${cur_lang}.dvi -o $tempdir/install.${cur_lang}.ps
-    RET=$?; [ $RET -ne 0 ] && return $RET
-	
-	output_files="$output_files $tempdir/install.${cur_lang}.ps"
-
-    return 0
-}
-
-debug_echo () {
-	if [ ! -z "$debug" ]; then
-		echo "DEBUG: $1"
-	fi
-}
-
-create_toolchain () {
-
-	echo -n "$((($BUILD_NO-1)*100/$TOTAL_BUILDS))	$cur_lang	$cur_arch	$cur_format	Docbook "
-	for i in $1; do
-		echo -n "-> $i "
-		create_$i;
-    	RET=$?; [ $RET -ne 0 ] && break
-	done
-	
-}
-
-create_file () {
-
-	case $cur_format in
-		htmlone) create_toolchain "ProfiledXML SingleHTML" ;;
-		html) create_toolchain "ProfiledXML HTML" ;;
-		ps) create_toolchain "ProfiledXML JadeTeX JadeDVI PS" ;;
-		pdf)  create_toolchain "ProfiledXML JadeTeX PDF" ;;
-#		dvi)  create_toolchain "ProfiledXML JadeTeX JadeDVI" ;;
-		text)  create_toolchain "ProfiledXML SingleHTML Text" ;;
-		newps) create_toolchain "ProfiledXML LaTeX DVI newPS" ;;
-		newpdf) create_toolchain "ProfiledXML LaTeX newPDF" ;;
-		latex) create_toolchain "ProfiledXML LaTeX" ;;
-#		dvinew) create_toolchain "ProfiledXML LaTeX DVI"  ;;
-	esac
-
-	return $RET
-}
-
-handle_errors () {
-
-	RET=$?
-	case $RET in
-		0)
-			BUILD_OK="$BUILD_OK $cur_lang/$cur_arch/$cur_format"
-			;;
-		1)
-			BUILD_FAIL="$BUILD_FAIL $cur_lang/$cur_arch/$cur_format"
-			ERROR="execution error"
-			;;
-		9)
-			BUILD_FAIL="$BUILD_FAIL $cur_lang/$cur_arch/$cur_format"
-			ERROR="missing build dependencies"
-			;;
-		*)
-			BUILD_FAIL="$BUILD_FAIL $cur_lang/$cur_arch/$cur_format"
-			ERROR="unknown, code $RET"
-			;;
-	esac
-	if [ $RET -ne 0 ]; then
-		echo "-- failed ($ERROR)!"
-		return 1
-	else
-		echo "-- OK!"
-		return 0
-	fi
-}
-
-cleanup() {
-	
-if [ -z "$debug" ]; then
-	rm -rf $tempdir
-fi
-	
-}
-
-#################
-# CONFIGURATION #
-#################
-
-basedir="$(cd "$(dirname $0)"; pwd)"
-manual_path="$(echo $basedir | sed "s:/build$::")"
-build_path="$manual_path/build"
-
-# Define all possible languages, formats and archs.
-
-# Warning: it is necessary to keep spaces around each arch, language and
-# format to make sure we don't get an arch 'ps' just because it's a
-# substring of 'mipsel'
-
-LANGUAGES=`find $basedir/.. -type d -maxdepth 1 -printf " %f \n" | grep -v "^\ \." | grep -v "build"  | grep -v "scripts" | grep -v "po" | sort | tr -d "\n"`
-ARCHS=`find arch-options -type f -maxdepth 1 -printf " %f "`
-FORMATS=" html text pdf ps newpdf newps  htmlone latex "
-
-# Defaults 
-
-language=""
-arch=""
-format=""
-default_language="en"
-default_format="html"
-default_arch="i386"
-debug=""
-
-# Paths
-
-tempdir="build.tmp"
-dynamic="${tempdir}/dynamic.ent"
-
-stylesheet_dir="$build_path/stylesheets"
-stylesheet_profile="$stylesheet_dir/style-profile.xsl"
-stylesheet_html="$stylesheet_dir/style-html.xsl"
-stylesheet_html_single="$stylesheet_dir/style-html-single.xsl"
-stylesheet_fo="$stylesheet_dir/style-fo.xsl"
-stylesheet_dsssl="$stylesheet_dir/style-print.dsl"
-
-
-######################
-# Parse command line #
-######################
-
-while [ "$1" != "" ]; do
-	found=""
-	comp=" $1 "
-	case $LANGUAGES in
-	*$comp*) language="$1 $language"
-		found="y"
-		;;
-	*);;
-	esac
-	
-	case $ARCHS in
-	*$comp*) arch="$1 $arch"
-		found="y"
-		;;
-	*);;
-	esac
-	
-	case $FORMATS in
-	*$comp*) format="$1 $format"
-		found="y"
-		;;
-	*);;
-	esac
-	
-	if [ "$comp" == " --help " -o "$comp" == " help " ]; then
-		usage
-		found="y"
-	fi
-
-	if [ "$comp" == " debug " ]; then
-		debug="yes"
-		found="y"
-	fi
-	
-	if [ "$comp" == " -d " ]; then
-		shift
-		destdir="$1"
-		found="y"
-	fi
-	
-	if [ "$comp" == " official " ]; then
-		official_build="yes"	
-		found="y"
-	fi
-	
-	if [ -z "$found" ]; then
-		echo "Option '$1' unknown or unsupported. Ignoring."
-	fi
-	
-	shift
-	
-done
-
-if [ -z "$language" ]; then
-	language="$default_language"
-fi
-
-if [ -z "$format" ]; then
-	format="$default_format"
-fi
-
-if [ -z "$arch" ]; then
-	arch="$default_arch"
-fi
-
-debug_echo "Languages '$language'"
-debug_echo "Formats '$format'"
-debug_echo "Archs '$arch'"
-	
-# End parsing
-
-cd $build_path
-
-if [ -z "$destdir" ]; then
-    destdir="build.out"
-fi
-
-
-debug_echo "Output directory '$destdir'"
-
-
-
-############
-# MAINLINE #
-############
-
-# Clean old builds
-
-#cleanup
-
-#mkdir -p $tempdir
-
-if [ ! -d "$destdir" ]; then 
-	mkdir -p $destdir
-fi
-
-BUILD_OK=""
-BUILD_FAIL=""
-BUILD_NO="0"
-
-output_files=""
-
-TOTAL_BUILDS="$((`echo $language | wc -w`*`echo $arch | wc -w`*`echo $format | wc -w`))"
-
-debug_echo "$TOTAL_BUILDS builds"
-
-echo "------	----	----	------	------"
-echo "% Done	Lang	Arch	Format	Status"
-echo "------	----	----	------	------"
-
-for cur_lang in $language; do
-	for cur_arch in $arch; do
-		cleanup && mkdir -p $tempdir
-		for cur_format in $format ; do
-			BUILD_NO=$(($BUILD_NO+1))
-			create_file
-			handle_errors 
-			debug_echo "Output files '$output_files'"
-			for i in $output_files; do
-				output="$i"
-			done
-			mv "$output" "$destdir"
-			output_files=""
-		done
-	done
-done
-
-echo "100% done."
-
-cleanup
-
-# Evaluate the overall results
-[ -z "$BUILD_FAIL" ] && exit 0            # Build successful for all formats
-echo "Warning: The following formats failed to build:$BUILD_FAIL"
-[ -n "$BUILD_OK" ] && exit 2              # Build failed for some formats
-exit 1                                    # Build failed for all formats
-
-#######
-# END #
-#######