This file documents some of the problems you may encounter when upgrading your ports. We try our best to minimize these disruptions, but sometimes they are unavoidable. You should get into the habit of checking this file for changes each time you update your ports collection, before attempting any port upgrades. 20231229: AFFECTS: users of databases/tarantool AUTHOR: arrowd@FreeBSD.org A new major version of the tarantool has been released. databases/tarantool renamed to databases/tarantool2. 2.11 is an LTS version and will be supported for a while. 20231125: AFFECTS: users of lang/php81 AUTHOR: bofh@FreeBSD.org The default version of PHP has been switched from 8.1 to 8.2. If you use binary packages you should make a list of php packages before running 'pkg upgrade': # pkg info \*php81\* > ~/installed-php-ports-list After the upgrade, check with such list if all your php extensions are still installed, and reinstall them if needed. If you use mod_php81 you need to deinstall it and install mod_php82. 20231104: AFFECTS: users of security/libressl AUTHOR: brnrd@FreeBSD.org The port has been updated to the latest stable version 3.8 of LibreSSL. The shared library versions of the libraries have been bumped. After upgrading, manually update all packages that depend on any of the libraries provided by LibreSSL (libssl, libcrypto and libtls) since the versions of these libraries have changed. Normally, you can obtain the list of dependent software by running the following command: # pkg info -r libressl Then you should rebuild all ports depending on libressl to avoid dangling shared library dependencies. 20231031: AFFECTS: users of devel/subversion-lts AUTHOR: michaelo@FreeBSD.org devel/subversion-lts has been updated from 1.10.x to the latest LTS version, 1.14.x. Some changes between these releases may require attention from administrators or users. Refer to https://subversion.apache.org/docs/release-notes/1.14.html#compat-misc for details. 20231028: AFFECTS: users of net-mgmt/nfdump nfdump-1.7.x is compatible to nfdump-1.6.18, which means it can read files created with nfdump-1.6.18 or newer. Flow files created with earlier nfdump versions may not contain all flow elements. If you have older files, it is recommended to use nfdump-1.6.17 to update the records. nfdump 1.7.x provides the same set of programs as 1.6.x and can be used almost as a drop-in replacement. This may change in future and older legacy programs may be removed. You can convert any old files from nfdump-1.6 to nfdump-1.7 format by reading/writing files: ./nfdump -r old-flowfile -y -w new-flowfile Please note, that only nfdump may read older flow files. All other programs relay on the new file format. 20231027: AFFECTS: users of net-mgmt/librenms AUTHOR: dvl@FreeBSD.org When updating to >= 23.10.0, a broken crontab is fixed. This breakage caused the validation error: Scheduler is not running After updating, If that error does not clear for you, run: sudo lnms config:cache 20231027: AFFECTS: users of print/ghostscript9* AUTHOR: michaelo@FreeBSD.org The default ghostscript version has been updated from 9 to 10. If you compile your own ports you may keep 9 as the default version by adding the following lines to your /etc/make.conf file: # # Keep ghostscript 9 as default version # DEFAULT_VERSIONS+=ghostscript=9 Please note that print/ghostcript9* will be removed in the future since it is not supported by upstream anymore. 20231026: AFFECTS: users of lang/chicken AUTHOR: gahr@FreeBSD.org The chicken binaries csc and csi, together with their manual pages, have been renamed to chicken-csc and chicken-csi, to avoid conflicts with lang/mono. This is in line with what several Linux distros do. See PR 274736. 20231023: AFFECTS: users of mail/mailman3 AUTHOR: einar@isnic.is logging.http section has now been split into two parts, logging.http is for the Mailman internal code and logging.gunicorn is for Gunicorn specifically since they have different logging formats. This should fix spurious errors with KeyError: t that was often confusing for users. Python 3.9 is now the minimum supported version of Python. 20231017: AFFECTS: users of lang/perl5* AUTHOR: delphij@FreeBSD.org The default Perl version has been switched to Perl 5.36. If you are using binary packages to upgrade your system, you do not have anything to do, pkg upgrade will do the right thing. 20231014: AFFECTS: users of security/openssl and security/openssl30 AUTHOR: brnrd@FreeBSD.org The openssl port was renamed to openssl111 and subsequently the openssl30 port was renamed to openssl. The shared library version of OpenSSL has been bumped. Users of DEFAULT_VERSIONS= ssl=openssl30 must update this to ssl=openssl. Users of DEFAULT_VERSIONS= ssl=openssl should not change this unless they use ports that require the deprecated OpenSSL 1.1.1 version. You must rebuild all ports that depend on OpenSSL if you use OpenSSL from ports. 20231011: AFFECTS: users of www/caddy AUTHOR: adamw@FreeBSD.org The default admin endpoint has changed from localhost:2019 to /var/run/caddy/caddy.sock. Using a Unix socket is more secure, allowing it to be secured by filesystem permissions rather than requiring a firewall. If you only control caddy from the rc(8) script (service caddy ...), you don't need to do anything. If you access the API yourself, you will want to update your scripts to use the new socket. To use the old endpoint, add the following to /etc/rc.conf: caddy_admin="localhost:2019" 20231009: AFFECTS: users of net/ntpd-rs AUTHOR: mikael@freebsd.org In 1.0.0 the configuration has been completely reworked, please check the documentation for details. Configuration will not automatically migrate. 20231004: AFFECTS: www/gitlab-ce AUTHOR: mfechner@FreeBSD.org Before you upgrade to version 16.4.x or higher, make sure you did the upgrade to 16.3.x! The database migration for 16.4.1 can fail due to unexpected name of a foreign key. So it is recommended to have a database backup available in case the solution described in the update manual does not work for you. The upgrade manual can be found as usual here: https://gitlab.fechner.net/mfechner/Gitlab-docu/-/blob/master/update/16.3-16.4-freebsd.md 20230930: AFFECTS: users of Transmission (net-p2p/transmission@*) AUTHOR: mondo.debater_0q@icloud.com Fixes Bug 274065 by reorganizing the port as a metaport (net-p2p/transmission) and components port (net-p2p/transmission-components). Each component may be installed through the flavors of transmission-componenents (@cli, @daemon, @docs, @gtk, @qt, @utils). Alternatively, one or more component may be installed by running make config on the metaport net-p2p/transmission. AFFECTS: users of devel/php-composer2 AUTHOR: madpilot@FreeBSD.org The composer2 ports has been moved over the old devel/php-composer port, which was still providing the old EOLed version 1 of the software. Please use `pkg install php81-composer` (substitute 81 with the PHP version you're using) to properly upgrade. 20230924: AFFECTS: users of XFCE desktop (x11-wm/xfce4) AUTHOR: madpilot@FreeBSD.org XFCE 4.18 is incompatible with the latest version of the adwaita icon theme (version 42.0 and newer), which was used as the default one. Due to this the default icon theme has been changed to x11-themes/xfce-icons-elementary. Users that have XFCE already installed and are using the adwaita icon theme will notice missing icons. To fix this you can install any other icon theme (like x11-themes/xfce-icons-elementary) and configure XFCE to use that via the "appearance" settings application, under the "icons" tab. 20230919: AFFECTS: users of net-p2p/transmission AUTHOR: mondo.debater_0q@icloud.com The 4.0 port haphazardly consolidated prior slave ports into flavors of a single port. The flavors have now been revised to better match releases prior to 4.0. The -full flavor included in the 4.0 port has been replaced with -default, which restores the compile-time options of prior release's metaport. Other flavors allow for more piecemeal installs. The prior -web slave port can be installed through the -default flavor or the -daemon flavor. See Bug 273841 for more details. 20230915: AFFECTS: users of print/ghostscript10 AUTHOR: michael.osipov@siemens.com The port flavors have been replaced with a default port option of X11. The flavors approach creates conflicting dependencies with other ports which cannot be solved this time with the ports framework. See PRs 270989 and 272541 for details. 20230910: AFFECTS: users of dns/powerdns AUTHOR: tremere@cainites.net In Authoritative Server 4.8, the LMDB backend gains a new Lightning Stream-compatible schema, which requires a data migration (this is automatic, and there is no migration back to the old schema). LMDB backend users should pay extra attention to the Upgrade Notes (https://doc.powerdns.com/authoritative/upgrading.html). 20230910: AFFECTS: users of net-mgmt/netbox AUTHOR: kai@FreeBSD.org 1. Please make sure that the PostgreSQL server for the NetBox instance is running version 12 or higher. This is because Django 4.2 requires PostgreSQL 12 as a minimum. 2. Please also check the pkg-message and the changelogs for further info. 20230908: AFFECTS: users of databases/postgresql* and other software using PostgreSQL to run AUTHOR: kbowling@FreeBSD.org The default version of PostgreSQL has been switched from 13 to 15. The upgrade procedure can use up twice the space the databases currently needs. If you have a big amount of stored data take a closer look at the manpage of pg_upgrade for avoidance and/or speedup of the upgrade. The upgrade instructions consider a basic usage and do not match complex scenarios like replication, sharding, or similar. Upgrade instructions: First stop your PostgreSQL, create PostgreSQL-binaries and backup your data. If you have another Version of PostgreSQL installed, for example 13, your files are named according to this. # service postgresql stop # pkg create postgresql13-server postgresql13-contrib # mkdir /tmp/pg-upgrade # tar xf postgresql13-server-13.12.pkg -C /tmp/pg-upgrade # tar xf postgresql13-contrib-13.12.pkg -C /tmp/pg-upgrade # pkg delete -f databases/postgresql13-server databases/postgresql13-contrib databases/postgresql13-client Now update PostgreSQL: pkg user: # pkg install databases/postgresql15-server databases/postgresql15-contrib # pkg upgrade Portmaster users: # portmaster databases/postgresql15-server databases/postgresql15-contrib # portmaster -a Portupgrade users: # portinstall databases/postgresql15-server databases/postgresql15-contrib # portupgrade -a After installing the new PostgreSQL version you need to convert all your databases to new version: # su -l postgres -c "/usr/local/bin/initdb --encoding=utf-8 --lc-collate=C -D /var/db/postgres/data15 -U postgres" # su -l postgres -c "pg_upgrade -b /tmp/pg-upgrade/usr/local/bin/ -d /var/db/postgres/data13/ -B /usr/local/bin/ -D /var/db/postgres/data15/ -U postgres " Now the migration is finished. You can start PostgreSQL again with: # service postgresql start ATTENTION: 1) The default user changed from "pgsql" to "postgres" in 11. The migration steps above now assume the "postgres" database user and FreeBSD user. 2) See the updating entry 20190829 if you are updating from a release prior to 11. 3) If you use non-default initdb options, you have to adjust the initdb-command accordingly 20230906: AUTHOR: jrm@FreeBSD.org AFFECTS: users of sysutils/devcpu-data* The CPU microcode ports have been reorganized. The new ports are: sysutils/cpu-microcode, sysutils/cpu-microcode-amd, sysutils/cpu-microcode-intel, and cpu-microcode-rc. To install all CPU microcode packages: pkg install cpu-microcode To install only packages for a specific CPU vendor: pkg install cpu-microcode-amd or pkg install cpu-microcode-intel To give users time to adjust to these changes, sysutils/devcpu-data will remain in the tree until the end of 2023. The port has been converted to a metaport and now provides the same functionality as sysutils/cpu-microcode. Refer to the commit log in bc7829212d153aeff69b439d08e2e3001ef88ba3 for an explanation as to why these changes were made. 20230904: AUTHOR: netchild@FreeBSD.org AFFECTS: users of misc/openhab The rc.d script of 4.0.2 had an error which didn't take the user to run openhab into account. After installing the update and stopping openhab run (for the default settings) chown -R openhab:openhab /var/db/openhab/userdata /var/log/openhab If you use other directories for the userdata and logs, you need to adapt accordingly. 20230822: AUTHOR: arrowd@FreeBSD.org AFFECTS: users of sysutils/polkit together with sysutils/consolekit2 ConsoleKit2 has grown some logind1 compatibility which resulted in breaking changes in its API. One of its consumers, Polkit, is patched to handle it, so make sure to update both ports simultaneously. 20230822: AUTHOR: leres@FreeBSD.org AFFECTS: users of security/zeek Zeek has been upgraded to 6.0.0 and the NETMAP option was removed; it was too difficult to build it without zeek being installed in %%PREFIX%%. The consensus was that this was a rarely used feature, please reach out to me if need this (I've done some work on a new security/zeek-netmap port that is probably the right way forward). When I upgraded zeek on my systems I found some cruft left over from previous versions. The way I recommend upgrading from 5.0.9 to 6.0.0 is: service zeek stop pkg delete -fy zeek py311-zkg [clean up leftover files in /usr/local/lib/zeek] pkg install -y zeek service zeek deploy 20230817: AFFECTS: users of databases/redis AUTHOR: yasu@FreeBSD.org The databases/redis port has been updated to 7.2. Users wanting to stay on 7.0 can replace databases/redis with databases/redis70 with one of the following commands. If you use pkg with binary packages: # pkg set -o databases/redis:databases/redis70 # pkg upgrade If you use portmaster: # portmaster -o databases/redis70 databases/redis If you use portupgrade: # portupgrade -o databases/redis70 databases/redis 20230814: AFFECTS: usrs of www/kdsoap AUTHOR: kde@FreeBSD.org The port www/kdsoap has been flavorized to support both Qt5 and Qt6. For symmetry, the Qt5 package has been renamed to kdsoap-qt5. 20230811: AFFECTS: users of www/p5-AnyEvent-WebSocket-Client AUTHOR: rodrigo@FreeBSD.org The update to AnyEvent-WebSocket-Client 0.55 introduce a change in behavior: close() default return code is now 1000 instead of 1005 20230730: AFFECTS: users of lang/perl5* AUTHOR: delphij@FreeBSD.org The default Perl version has been switched to Perl 5.34. If you are using binary packages to upgrade your system, you do not have anything to do, pkg upgrade will do the right thing. 20230726: AFFECTS: users of misc/openhab AUTHOR: netchild@FreeBSD.org The update to openhab 4.0.0 may require changes to the running 3.x setup. Read the release notes at https://github.com/openhab/openhab-distro/releases/tag/4.0.0 and the blog entry at https://www.openhab.org/blog/2023-07-23-openhab-4-0-release.html for manual changes which are required before updating the port. After the update the pkg-message provides some more info about manual changes which are required to perform before the first start of 4.0.0. Note, this includes a switch from java 11 to java 17. You can deinstall openjdk11 afterwards, if it is not needed for something else. 20230723: AFFECTS: users of security/py-cryptography AUTHOR: tcberner@FreeBSD.org Modern py-cryptography uses rust. In order to still support the Tier-2 architectures without rust support, a new default-version was added: PYCRYPTOGRAPHY it allows for the values 'rust' and 'legacy'. The default is 'rust' on all platforms supporting this. Note: users that are relying on the 'legacy' version will also take care of using a non-base OpenSSL in the future. 20230620: AFFECTS: users of lang/elixir-devel AUTHOR: dch@FreeBSD.org Note that Elixir now *requires* OTP25+ or better at runtime. For the -devel flavour you are still free to choose OTP25 or OTP26, but the default OTP24 from lang/erlang will *not* work. 20230618: AFFECTS: users of devel/soft-serve AUTHOR: ashish@FreeBSD.org soft-serve no longer uses config repository for configuration. To migrate configuration from 0.4.x to 0.5.x, please review the upgrade documentation at: https://github.com/charmbracelet/soft-serve/releases/tag/v0.5.0 The migration process has been incorporated in rc.d script's migrate command, and can be performed using following instructions: 0. Please make sure to backup repository data 1. Stop existing process: # /usr/local/etc/rc.d/soft-serve stop 2. Run the rc.d script to migrate, e.g. # /usr/local/etc/rc.d/soft-serve migrate INFO Setting SSH listen address... INFO Copying SSH host key... INFO Reading config repository... INFO Setting server settings... INFO Copying repos... INFO Copying repo ports INFO Copying readme from "config" to ".soft-serve" INFO Setting repos metadata & collabs... INFO Creating users & collabs... INFO Creating user "ashish" INFO Writing config... INFO Done! Another variable is introduced in rc.d script, soft_serve_data_path, indicating the path to data directory used by soft-serve. 20230618: AFFECTS: textproc/apache-solr* AUTHOR: mfechner@FreeBSD.org Apache solr is upgraded to version 9. Data migration is required, examples for dovecot data can be found here: https://dovecot.org/pipermail/dovecot/2022-May/124701.html https://dovecot.org/pipermail/dovecot/2022-May/124711.html If you like to stay on version8: # pkg delete apache-solr # pkg install apache-solr8 20230609: AFFECTS: users of security/sequoia AUTHOR: vishwin@FreeBSD.org sq has been split to security/sequoia-sq; security/sequoia becomes a meta-port, where security/sequoia-sq is currently the only dependency. As other programs are individually ported over, they will become OPTIONS in the meta-port. Per upstream, FFI is deprecated in favour of point solutions. 20230602: AFFECTS: users of net-mgmt/netbox AUTHOR: kai@FreeBSD.org 1. If the plugin security/py-netbox-secretstore is used, which is no longer maintained by upstream, the following steps must be done before upgrading to NetBox 3.5: * Migrate from security/py-netbox-secretstore (= 1.4.2_2) to security/py-netbox-secrets (= 1.7.6) with a NetBox 3.4.x instance. It is very important that the versions of py-netbox-secretstore and py-netbox-secrets match as specified otherwise the migration will not be successful. The reason for this is that py-netbox-secrets 1.8.x is not backwards compatible with Netbox 3.4. For further details please see the updating instructions of py-netbox-secretstore or the UPDATING entry of 2023-05-11. 2. Please also check the pkg-message and the changelogs for further info. 20230531: AFFECTS: users of net-mgmt/netdisco AUTHOR: dgeo@centrale-marseille.fr The netdisco user now needs a HOME and a shell. For existing installs you will need to set HOME to /usr/local/etc/netdisco and shell to /bin/sh. For example in one shell line: pw user mod netdisco -d /usr/local/etc/netdisco -s /bin/sh 20230526: AFFECTS: users of mail/exim AUTHOR: pi@FreeBSD.org The port changes from USE_DB to USE_NDBM. Any existing configuration like ${lookup{$needle}dbm{haystack.db}} will need to change to ${lookup{$needle}dbm{haystack}}. Please also rename your old DBM files while the exim daemon is stopped: find /var/spool/exim/db/* -not -name \*.lockfile -exec mv -i {} {}.db \; 20230513: AFFECTS: users of www/tt-rss AUTHOR: dereks@lifeofadishwasher.com www/tt-rss now expects the user to install the database drivers by hand allowing the port to be database independent however it would be best if you mark the php driver packages as a non-automatic package such that pkg-autoremove doesn't uninstall them. Change 80 to your corresponding php version (80, 81, 82) mysql: pkg set -yA 0 php80-mysqli php80-pdo_mysql; pgsql: pkg set -yA 0 php80-pgsql php80-pdo_pgsql; 20230511: AFFECTS: users of net-mgmt/py-netbox-secretstore AUTHOR: kai@FreeBSD.org Upstream no longer maintains py-netbox-secretstore which it is not compatible with NetBox 3.5 or newer. To ensure compatibility with newer releases of NetBox, the py-netbox-secrets plugin should be used instead. To migrate from security/py-netbox-secretstore to security/py-netbox-secrets please do following steps: 1. Make a backup. 2. Install security/py-netbox-secrets 3. Enable both plugins by updating the following line in the netbox configuration (e.g. /usr/local/share/netbox/netbox/configuration.py): PLUGINS = ['netbox_secretstore', 'netbox_secrets'] 4. Run NetBox migrations: # cd /usr/local/share/netbox # python3.9 manage.py migrate 5. Re-adjust the indices for the netbox-secrets plugin: # python3.9 manage.py sqlsequencereset netbox_secrets > output.sql 6. Run the output of the previous command in the database, e.g.: # psql -d NETBOXDB < output.sql 7. You can now remove netbox-secretstore from the application by removing it from the PLUGINS line in the netbox configuration: PLUGINS = ['netbox_secrets'] 8. Collect static files of the netbox-secrets plugin: # python3.9 manage.py collectstatic --no-input 9. Restart WSGI/httpd environment (supervisord/apache/nginx/etc.). 10. You may have clean up your database of the old tables manually, e.g.: DROP TABLE netbox_secretstore_secret; DROP TABLE netbox_secretstore_secretrole; DROP TABLE netbox_secretstore_sessionkey; DROP TABLE netbox_secretstore_userkey; 11. Uninstall security/py-netbox-secretstore. 20230505: AFFECTS: users of mail/mutt AUTHOR: dereks@lifeofadishwasher.com The patches included in the mail/mutt port will be removed in approximately a month making the port more inline with upstream. If you require any of these features most are available in mail/neomutt or it's possible to use EXTRA_PATCH_TREE to patch a port when building locally. 20230504: AFFECTS: users of sysutils/py-mqttwarn AUTHOR: dvl@FreeBSD.org The redis option REISPUB has been renamed to REDISPUB You should update any make.conf setting etc which refer to this. e.g. change sysutils_py-mqttwarn_REISPUB to sysutils_py-mqttwarn_REDISPUB 20230416: AFFECTS: users of databases/mongodb50, databases/mongodb44 and databases/mongodb60 AUTHOR: ronald@FreeBSD.org MongoDB removed the settings 'fork' and 'pidFilePath' from the default etc/mongodb.conf file. This does not affect mongod started by etc/rc.d/mongod as the settings are passed as arguments. Please verify custom uses of mongod. 20230414: AFFECTS: users of www/gitea AUTHOR: fernape@FreeBSD.org Gitea 1.19.1 contains a breaking change. actions unit has ben renamed to to repo.actions. 20230407: AFFECTS: users of devel/sonarqube-community AUTHOR: netchild@FreeBSD.org You need to make sure to update missing and changed values in PREFIX/libexec/sonarqube/conf/sonar.properties from PREFIX/libexec/sonarqube/conf/sonar.properties.sample 20230318: AFFECTS: users of security/libressl AUTHOR: brnrd@FreeBSD.org The port has been updated to the latest stable version 3.6 of LibreSSL. The shared library versions of the libraries have been bumped. After upgrading, manually update all packages that depend on any of the libraries provided by LibreSSL (libssl, libcrypto and libtls) since the versions of these libraries have changed. Normally, you can obtain the list of dependent software by running the following command: # pkg info -r libressl Then you should rebuild all ports depending on libressl to avoid dangling shared library dependencies. 20230315: AFFECTS: users of lang/ruby30 AUTHOR: yasu@FreeBSD.org The default ruby version has been updated from 3.0 to 3.1. If you compile your own ports you may keep 3.0 as the default version by adding the following lines to your /etc/make.conf file: # # Keep ruby 3.0 as default version # DEFAULT_VERSIONS+=ruby=3.0 If you wish to update to the new default version, you need to first stop any software that uses ruby. Then, you will need to follow these steps, depending upon how you manage your system. If you use pkg, simply upgrade: # pkg upgrade If you do not use pkg, please check entry 20190420. The description there should also work for this version. 20230314: AFFECTS: users of security/openssl-devel AUTHOR: brnrd@FreeBSD.org Users using DEFAULT_VERSIONS=ssl=openssl-devel must update their configuration to DEFAULT_VERSIONS=ssl=openssl30 or openssl31. 20230313: AFFECTS: users of databases/sqlite3 AUTHOR: fuz@FreeBSD.org Due to various ports not being prepared for this change (see 20230227 entry), the DQS option of databases/sqlite3 has been reenabled as a stop gap measure. It is scheduled to be disabled again for good no earlier than 20240101, giving downstream software authors more time to fix their queries. See also: https://sqlite.org/quirks.html#dblquote 20230311: AFFECTS: users of net/dshell AUTHOR: nobutaka@FreeBSD.org net/dshell now depends on net/py-pcapy-ng instead of net/py-pcapy. Because net/py-pcapy-ng conflicts with net/py-pcapy, please uninstall py39-pcapy with the following command before upgrading: # pkg delete -f py39-pcapy 20230310: AFFECTS: users of net-mgmt/unifi7 AUTHOR: otis@FreeBSD.org The mongodb dependency has been changed from 36 to 44, as MongoDB 3.6 is long out out support and end of life. The upgrade path should be as following: 1. Take a backup from within the unifi7 application PRIOR to updating! 2. Stop the unifi7 service (if running) 3. Copy the "backup" directory from LOCALBASE/share/java/unifi/data to a safe location. Also copy keystore and system.properties if you have made any modifications to those files 4. Remove files and directories under LOCALBASE/share/java/unifi/data 5. Upgrade the package 6. Copy the "backup" directory from a safe location back to LOCALBASE/share/java/unifi/data 7. Start the service 8. Restore the configuration from backup As an optional step, review system.properties and keystore to merge any manual modifications you have made (this has to be done with the application stopped) 20230310: AFFECTS: user of benchmarks/ddosify AUTHOR: fernape@FreeBSD.org keep-alive is removed from config file. In default mode, the engine will use keep-alive for all requests. If you want to disable keep-alive for a step, you can add Connection: close header to the step. 20230306: AFFECTS: users of www/qt5-webengine AUTHOR: kai@FreeBSD.org Users that upgrade www/qt5-webengine without using pkg/poudriere might experience failures due to conflicts with the installed version of 5.15.2. In that case, pkg delete -f the qt5-webengine package before building the updated version. 20230304: AFFECTS: users of accessibility/atk and accessibilty/at-spi2-atk AUTHOR: tcberner@FreeBSD.org The packages accessibility/atk and accessibility/at-spi2-atk have been integrated upstream into at-spi2-core. Users of these packages can manually remove them prior to updating accessibility/at-spi2-core using pkg delete -f atk at-spi2-atk if the pkg update process fails due to conflicting files. 20230227: AFFECTS: users of databases/sqlite3 AUTHOR: fuz@FreeBSD.org Option DQS is now disabled by default. This option controls the "double quoted string literals are accepted" quirk, permitting the use of double quotes around string literals if enabled. Users who rely on this quirk need to manually build databases/sqlite3 with the DQS option enabled. See also: https://sqlite.org/quirks.html#dblquote 20230227: AFFECTS: users of mail/py-spf-engine AUTHOR: yasu@FreeBSD.org Default configuration file path of pyspf-milter has changed. Since it looks for ${PREFIX}/etc/etc/pyspf-milter/pyspf-milter.conf now, you should edit the file if you run pyspf-milter. Alternatively you can specify other configuration file path by setting pyspf_milter_conffile variable in /etc/rc.conf. 20230222: AFFECTS: users of net-mgmt/netbox AUTHOR: kai@FreeBSD.org 1. Please make sure that the PostgreSQL server for the NetBox instance is running version 11 or higher. This is because PostgreSQL 10 is End-of-Life since November 2022 and Django 4.1 requires PostgreSQL 11 as a minimum. 2. Please also check the pkg-message and the changelogs for further info. 20230218: AFFECTS: users of databases/mysql57-(server|client) AUTHOR: joneum@FreeBSD.org The default MySQL version has been updated from 5.7 to 8.0. If you compile your own ports you may keep 5.7 as the default version by adding the following lines to your /etc/make.conf file: # # Keep MySQL 5.7 as default version # DEFAULT_VERSIONS+=mysql=5.7 If you wish to update to the new default version, you need to first stop any running server instance. Then, you will need to follow these steps, depending on installed packages. # pkg set -o databases/mysql57-client:databases/mysql80-client # pkg set -o databases/mysql57-server:databases/mysql80-server # pkg upgrade 20230213: Affects: users of sysutils/nut* AUTHOR: cy@FreeBSD.org The nut file ownership fixups due to the UID/GID change from uucp/uucp to nut/nut may not be desireable for all users. Some users with custom file ownership may wish ownership to remain untouched. This revision to the nut family of ports/packages allows users to optionally disable automatic fixup of nut file ownership. 20230213: AFFECTS: users of security/logcheck AUTHOR: yasu@FreeBSD.org Since 1.4.1 ${PREFIX}/etc/logcheck/logcheck.logfiles is empty and files to be checked by logcheck are specified in ${PREFIX}/etc/logcheck/logcheck.logfiles.d/syslog.logfiles. So if you previously edited the former, then you should edit the latter now. 20230210: AFFECTS: users of mail/fetchmail AUTHOR: fernape@FreeBSD.org Fetchmail now warns about OpenSSL before 1.1.1s or 3.0.7, and rejects wolfSSL older than 5.5.1. 20230209: AFFECTS: users of audio/jack AUTHOR: fernape@FreeBSD.org audio/jack 1.9.22 fixes an issue with latency correction on FreeBSD. Latency correction parameters have to be measured again after update. 20230130: AFFECTS: users of USES=nodejs, www/node*, www/npm* and www/yarn* AUTHOR: sunpoet@FreeBSD.org The current USES=nodejs has the following issues: - www/node is not the default version while www/node16 is. - It also means inconsistent naming of node ports. - www/npm duplicates with www/npm-node16. - www/yarn duplicates with www/yarn-node16. The notable changes are introduced to fix the above issues: - Rewrite Mk/Uses/nodejs.mk. - Add new LTS version of nodejs (www/node18). - Add new current version of nodejs (www/node19). - Change default nodejs version from 16 to 18 (latest LTS), - Use consistent naming for all supported node versions. - Convert www/node, www/npm and www/yarn to meta ports. After these changes: - All supported node versions are named as node{14,16,18,19}. - www/node is a meta port which depends on the default version (e.g. www/node18) - www/npm is a meta port which depends on the default version (e.g. www/npm-node18) - www/yarn is a meta port which depends on the default version (e.g. www/yarn-node18) 20230129: AFFECTS: users of benchmarks/ddosify AUTHOR: fernape@freebsd.org In 0.13.0 some configuration keys have been renamed for consistency. Have a look at https://github.com/ddosify/ddosify/releases/tag/v0.13.0 for details. 20230127: AFFECTS: users of security/openvpn AUTHOR: mandree@freebsd.org OpenVPN has been updated to the new upstream release v2.6.0, which is quite compatible with v2.5 versions. A copy of the latest v2.5.8 port is being kept as security/openvpn25 (or openvpn25 package) until end of March 2023. 20230116: AFFECTS: users of sysutils/nut and sysutils/nut-devel AUTHOR: cy@freebsd.org As of PR/268960 Network UPS Tools will now run under its own UID and GID instead of uucp. Users who wish to continue using the uucp user and group may add NUT_USER=uucp and NUT_GROUP=uucp to their make.conf. After upgrading sysutils/nut or sysutils/nut-devel with this patch, restart devd. Then restart nut. This will fix up the permissions of UPS USB devices and allow nut to start normally. 20230111: AFFECTS: users of sysutils/graylog AUTHOR: dch@freebsd.org Graylog 5.x and higher effectively constrains ElasticSearch dependencies, and in most cases will force a migration to OpenSearch 2.x, now available in ports. Plan accordingly. 20230104: AFFECTS: users of mail/spamassassin AUTHOR: cy@freebsd.org As of spamassassin 4.0.0 (3fdfceb36029) the deprecated HashCash plug-in was finally removed. Users using the HashCash plug-in will need to remove references to it. 20221226: AFFECTS: users of sysutils/zrepl AUTHOR: driesm@FreeBSD.org The Prometheus metric zrepl_version_daemon has been converted to the zrepl_start_time metric. The metric still reports the zrepl verison in a label. But the metric value is now the Unix timestamp at the time the daemon was started. The Grafana dashboard in dist/grafana has been updated. The RPC protocol version has also been bumped; all zrepl daemons in a setup must be updated and restarted before replication can resume. 20221220: AFFECTS: users of net-mgmt/unbound_exporter AUTHOR: thomas@beingboiled.info The config defaults for the log file and certificates have been changed. See /usr/local/etc/rc.d/unbound_exporter for possible options and adjust your rc.conf accordingly. 20221215: AFFECTS: users of security/clamav AUTHOR: yasu@FreeBSD.org Many users report that after updating ClamAV to 1.0.0 clamd and freshclam fails to start with integrity check error of databases. According to the result of investigation it happens with following conditions. 1. ClamAV is built on non-cleanroom environment (that is, neither FreeBSD official ClamAV package is used nor the package is built by user with poudriere). 2. math/tomsfastmath is installed in the system that ClamAV is built. So if the errror happens on you system, uninstall TomsFastMath first and then rebuild and reinstall ClamAV. The problem should disappear. 20221128: AFFECTS: devel/py-proxmoxer AUTHOR: einar@isnic.is AuthenticationError Moved proxmoxer.backends.https.AuthenticationError was moved to proxmoxer.AuthenticationError (the class itself is the same). Any imports or references to proxmoxer.backends.https.AuthenticationError should be changed to proxmoxer.AuthenticationError. ProxmoxResourceBase Removed While this should be a fully internal change, the ProxmoxResourceBase class was removed. Use ProxmoxResource instead. Removed ProxmoxHTTPTicketAuth The auth_token and csrf_token arguments are no longer supported. If an existing (still valid) token needs to be used, you can pass the token as password and proxmoxer will attempt to renew the ticket and retrieve a new token and CSRF token. 20221126: AFFECTS: textproc/kibana8 AUTHOR: otis@FreeBSD.org kibana8 now installs kibana-specific utilities into LOCALBASE/bin as symbolic links. Please check whether it will overwrite your local files with names same as these utilities and if so, please rename them or move out of the way in a different manner. 20221126: AFFECTS: textproc/elasticsearch8 AUTHOR: otis@FreeBSD.org elasticsearch8 now installs elasticsearch-specific utilities into LOCALBASE/bin as symbolic links (i.e. elasticsearch-cli and similar). Please check whether it will overwrite your local files with names same as these utilities and if so, please rename them or move out of the way in a different manner. 20221126: AFFECTS: users of lang/php80 AUTHOR: bofh@FreeBSD.org The default version of PHP has been switched from 8.0 to 8.1. If you use binary packages you should make a list of php packages before running 'pkg upgrade': # pkg info \*php80\* > ~/installed-php-ports-list After the upgrade, check with such list if all your php extensions are still installed, and reinstall them if needed. If you use mod_php80 you need to deinstall it and install mod_php81. 20221123: AFFECTS: x11-wm/jwm AUTHOR: fernape@FreeBSD.org jwm 2.4 introduces changes in the configuration. To convert an existing v2.3 configuration file using xsltproc, run: cp ~/.jwmrc ~/.jwmrc.old xsltproc jwm-2.4.xslt ~/.jwmrc.old > ~/.jwmrc If you have multiple configuration files, it may be necessary to apply the XSLT to some or all of them depending on what configuration options are stored in the file. 20221017: AFFECTS: archivers/star AUTHOR: fernape@FreeBSD.org With the update of devel/schilybase to 2022-10-16 a new port archivers/tartest has been splitted off from archivers/star. 20221016: AFFECTS: textproc/apache-solr AUTHOR: mfechner@FreeBSD.org Apache solr version 9 is released and made available as extra port textproc/apache-solr9. Version 9 cannot start directly with data from version 8. Additional steps for data migration is required. If you like to use the new version, deinstall the old version and install the new version: # pkg delete apache-solr # pkg install apache-solr9 After this you need to migrate data and migration, for this check the solr documentation. 20221015: AFFECTS: users of gstreamer1-* when upgrading via port builds on the host AUTHOR: riggs@FreeBSD.org The update of the gstreamer1-* ports to 1.20.3 requires a clean install of gstreamer1-* ports. In particular, when trying to update ports in-place using portupgrade or portmaster, the builds are likely to fail due to dependency mismatches. If this is your preferred update path, you need to deinstall (pkg delete -f) gstreamer1 and the plugins before reinstalling them from the ports tree. Note that pkg upgrade will do the right thing: If you use official FreeBSD packages or build your own set of packages using poudriere, nothing special is needed. 20221012: AFFECTS: devel/websvn AUTHOR: michael.osipov@siemens.com WebSVN 2.8.0 includes full PHP 8.x support which requires a change from PEAR to Composer 2. You must manually install dependencies through it, the ports system will not handle it anymore for you since */horde* (PR 266552) has been marked as incompatible with PHP 8.x for the time being. See pkg-message for detailed instructions. 20221011: AFFECTS: users of security/acme.sh AUTHOR: dvl@FreeBSD.org This update may break your install if you were using a symlink to %%EXAMPLESDIR%%/acme.sh.conf - that file is no longer installed. Instead, a log rotation configuration is now installed to etc/cron.d/acme.sh.sample you should modify etc/cron.d/acme.sh to needs. The port now installs a log rotation file to etc/newsyslog.d/acme.sh.sample and you you should update etc/newsyslog.d/acme.sh to suit your needs. This file has long been part of the port, but was never installed. Neither the log rotation nor the crontab are active until you remove the comments. 20221002: AFFECTS: users of shells/bash AUTHOR: ehaupt@FreeBSD.org Bash has been updated to version 5.2. In previous versions, the default port option-set used to link against libreadline from ports. However, the current version of devel/readline is too old for bash 5.2. For now, the default option has been switched to use the bundled version of libreadline and the other option is marked broken. Once devel/readline is updated this can be reverted. If you're updating bash from source and you've previously explicitly set to use use PORTS_READLINE, you'll have to disable the PORTS_READLINE option before updating: # cd /usr/ports/shells/bash # make config or flush it entirely: # cd /usr/ports/shells/bash # make rmconfig 20220929: AFFECTS: users of graphics/bmeps AUTHOR: takefu@airport.fm The executable name has been changed from this edition from bmpp to bitmap2pp 20220925: AFFECTS: users of security/libressl AUTHOR: brnrd@FreeBSD.org The port has been updated to the latest stable version 3.5 of LibreSSL. The shared library versions of the libraries have been bumped. After upgrading, manually update all packages that depend on any of the libraries provided by LibreSSL (libssl, libcrypto and libtls) since the versions of these libraries have changed. Normally, you can obtain the list of dependent software by running the following command: # pkg info -r libressl Then you should rebuild all ports depending on libressl to avoid dangling shared library dependencies. 20220919: AFFECTS: users of audio/strawberry AUTHOR: mandree@FreeBSD.org strawberry now uses FLAVORs based on the qt version, offering -qt5 and -qt6, with -qt5 the default. You may need to explicitly install either of the new flavors. 20220919: AFFECTS: users of sysutils/schilyutils AUTHOR: fuz@fuz.su Schilyutils has been split up into two ports. If you want the bosh shell, the new port is shells/bosh, which can be installed with: # pkg install bosh or # portmaster -o shells/bosh 20220918: AFFECTS: users of mail/roundcube AUTHOR: brnrd@FreeBSD.org Roundcube has been upgraded to 1.6.0 and introduces breaking changes to configuration options of remote services (imap, smtp, ldap, sieve). Check https://roundcube.net/news/2022/07/28/roundcube-1.6.0-released for details. Version 1.6 no longer includes the Classic and Larry skins, which are now available as separate mail/roundcube-classic and mail/roundcube-larry ports. 20220910: AFFECTS: users of devel/cmake AUTHOR: diizzy@FreeBSD.org CMake has been converted to a meta-port and new CMake packages created causes conflicts with old binary packages prior to this change. If CMake was installed using binary packages via pkg it needs to be uninstalled using pkg delete before installing CMake and related packages after this change. pkg delete cmake pkg install cmake-core If you're using portmaster you also need to delete the old CMake package before upgrading. 20220909: AFFECTS: users of emulators/qemu AUTHOR: bofh@FreeBSD.org emulators/qemu has been updated to 7.1.0. Previous 7.0.X branch has been repocopied to emulators/qemu70. If someone wants to stick with 7.0.X branch please use one of the following command: # pkg install qemu70/qemu70-nox11(based on flavor used) or # portmaster -o emulators/qemu70 emulators/qemu or # portupgrade -o emulators/qemu70 emulators/qemu 20220903: AFFECTS: users of editors/vim AUTHOR: adamw@FreeBSD.org The Vim port no longer installs a system-wide vimrc. It drastically affected config loading order, and led to various settings being clobbered, duplicated, or ignored. Vim's provided defaults.vim (/usr/local/share/vim/vim90/defaults.vim) continues to be read just as before, but its settings are no longer clobbered. Take a look in there for any settings you may want to change, and do ':h initialization' to see where Vim looks for config files. 20220903: AFFECTS: users of archivers/py-borgbackup AUTHOR: mandree@FreeBSD.org Borgbackup has been upgraded to version 1.2. For users who you wish to continue using version 1.1, use either of these commands for upgrading: With binary packages through pkg: pkg set -o archivers/py-borgbackup:archivers/py-borgbackup11 pkg upgrade With portmaster or portupgrade (replace the command accordingly): portmaster -o archivers/py-borgbackup11 archivers/py-borgbackup 20220901: AFFECTS: users of mail/rainloop-community AUTHOR: yasu@FreeBSD.org Since 1.17.0 upstream distributes only one "legacy" edition under MIT license and mail/rainloop-community is removed as a result. So please uninstall mail/rainloop-community (rainloop-community-phpXY) and install mail/rainloop (rainloop-phpXY) instead. 20220831: AFFECTS: users of x11/xscreensaver on 13.1-RELEASE AUTHOR: zirias@FreeBSD.org With the update to 6.04, xscreensaver now uses security/unix-selfauth-helper for PAM authentication. This relies on pam_exec.so, which had a bug causing a segfault on authentication attempts prior to 13.1-RELEASE-p1. For details, please see https://www.freebsd.org/security/advisories/FreeBSD-EN-22:19.pam_exec.asc Make sure your system is fully upgraded, otherwise you might be unable to unlock your screen. 20220825: AFFECTS: users of net/xrdp or net/xrdp-devel AUTHOR: meta@FreeBSD.org After xorg upgrade to 21.1.4, xorgxrdp session doesn't start as before This is because bin/Xorg has been replaced with X server binary wrapper. You must manually edit the Xorg section in etc/xrdp/sesman.ini to get it working again. The following is a short example of where, how to modify sesman.ini. Make sure to replace LOCALBASE with your actual path. [Xorg] ; Specify the path of non-suid Xorg executable. It might differ depending ; on your distribution and version. Find out the appropreate path for your ; environment. The typical path is known as follows: ; ; Fedora 26 or later : param=/usr/libexec/Xorg ; Debian 9 or later : param=/usr/lib/xorg/Xorg ; Ubuntu 16.04 or later : param=/usr/lib/xorg/Xorg ; Arch Linux : param=/usr/lib/Xorg ; CentOS 7 : param=/usr/bin/Xorg or param=Xorg ; CentOS 8 : param=/usr/libexec/Xorg ; -param=Xorg +param=LOCALBASE/libexec/Xorg 20220815: AFFECTS: users of net/keycloak AUTHOR: fernape@FreeBSD.org The flavors -mysql and -postgres were removed, the necessary configuration for those database backends was rolled into the base release by upstream. The configuration files changed completely, so they need to be rebuilt from scratch. 20220807: AFFECTS: users of news/inn AUTHOR: kbowling@FreeBSD.org The inn port has been updated to 2.7 release. Users upgrading from prior versions should read through the announcement for any manual upgrading steps that apply to your environment. https://lists.isc.org/pipermail/inn-announce/2022-July/000015.html 20220711: AFFECTS: users of security/stunnel AUTHOR: zi@FreeBSD.org The stunnel port has been updated to drop privileges to the stunnel user by default. As a result of this change, the pid file location has changed. If you have a running copy of stunnel, you should stop the process before performing the upgrade. Alternatively, you will need to # pkill stunnel;service stunnel start after the upgrade has been completed. 202207XYZ: AFFECTS: users of devel/maven-wrapper and devel/maven AUTHOR: michaelo@apache.org The environment variable M2_HOME has been replaced with more common MAVEN_HOME which can be used to pass a custom Maven home directory. 20220629: AFFECTS: updating x11-servers/xorg-server from a port AUTHOR: se@FreeBSD.org The xorg-server port now has a library dependency on x11/libxcvt, which cannot be installed when the previous version of xorg-server is present. To be able to update xorg-server from a port, the previous version needs to be manually deinstalled to allow libxcvt to be installed. 20220628: AFFECTS: users of Erlang and Elixir AUTHOR: dch@FreeBSD.org For more than a decade, the Elixir Mix tool and the Erlang rebar or erlang.mk build tools have been the de facto way of installing and managing packages for specific applications. All main-stream applications, from Riak, CouchDB, RabbitMQ, Phoenix, and Elixir, expect that packages are fetched and compiled into an OTP Release, with in-built version locking, external package management. There is no point in maintaining a large number of libraries, that are used neither for development, nor operations. Users are directed to https://rebar3.org/ https://erlang.mk/ or https://elixir-lang.org/getting-started/mix-otp/introduction-to-mix.html to fetch custom packages. https://www.freebsd.org/status/report-2021-07-2021-09/#_freebsd_erlang_ecosystem_ports_update 20220626: AFFECTS: users of python AUTHOR: thierry@FreeBSD.org The default version of python3 and python was switched to 3.9. For ports users wanting to keep version 3.8 as default, add DEFAULT_VERSIONS+= python=3.8 python3=3.8 to make.conf Following procedures may ease the upgrade: For users of pre-build packages: # sh # for i in $(pkg query -g %n 'py38-*'); do pkg set -yn ${i}:py39-${i#py38-}; done # pkg upgrade For portmaster users: # sh # portmaster -o lang/python39 python38 # REINSTALL="$(pkg info -o "*py38*" | awk '{printf "%s ", $2}')" # pkg delete -f "*py38*" # portmaster $REINSTALL # REBUILD=$(pkg query -g "%n:%dn" '*' | grep py3 | grep -v py39 | cut -d : -f 1 | sort -u) # portmaster $REBUILD # REBUILD2=$(pkg list | grep python-38 | xargs pkg which | awk '{print $6}' | sort -u) # portmaster $REBUILD2 Final steps (for pre-built packages & portmaster): If no longer required, Python 3.8 can be removed via "pkg remove python38" and the directory /usr/local/lib/python3.8 can then be deleted afterwards, if not empty. 20220625: AFFECTS: users of sysutils/fusefs-bindfs AUTHOR: doralitze@chaotikum.org Bindfs defaults to use direct I/O since version 1.16. While this results in major performance improvements as well as several bug fixes, this also breaks direct legacy calls to mmap. If your application still uses them consider these two options: 1. Mount using `--no-direct-io` 2. Upgrade your application in order to query mapping guards 20220623: AFFECTS: users of science/gramps AUTHOR: fernape@FreeBSD.org databases/py-bsddb3 is deprecated and will be removed in the future. With that gramps will lose the ability to load family trees using Berkeley DB. It is suggested to migrate all family trees using Berkeley DB by exporting them to gramps xml and import that gramps xml into a family tree using sqlite as database. 20220620: AFFECTS: users of www/selenium AUTHOR: fernape@FreeBSD.org The port has changed startup args so if you are using selenium_args= in rc.conf you need to add the parameter "standalone" manually. 20220616: AFFECTS: users of net-mgmt/netbox AUTHOR: kai@FreeBSD.org /!\ WARNING /!\ The NetBox 3.2 release contains major changes, so at least items 1.), 2.) and 3.) must be checked before proceeding with the upgrade! /!\ WARNING /!\ 1. This release includes a database migration that will remove the "asn", "contact_name", "contact_phone", and "contact_email" fields from the site model. (These fields have been superseded by the ASN and contact models introduced in NetBox v3.1.) To protect against the accidental destruction of data, the upgrade process will fail if any sites still have data in any of these fields. To bypass this safeguard, set the NETBOX_DELETE_LEGACY_DATA environment variable when running the upgrade script, which will permit the destruction of legacy data. A set of migration scripts is available to assist with the migration of legacy site data: https://github.com/netbox-community/migration-scripts 2. NetBox v3.2 requires Python 3.8 or later. 3. If the NetBox Plugin "net-mgmt/py-netbox-plugin-extension" is used, please disable it before the migrations are applied. This can be done by removing the entry "netbox_plugin_extensions" from the "PLUGINS" section in the NetBox configuration. Once the upgrade is done, this port/package can be safely removed as it's no longer required. 4. Please also check the pkg-message and the changelogs for further info. 20220608: AFFECTS: devel/autoconf-wrapper, devel/autoconf213 AUTHOR: tijl@FreeBSD.org These ports have been renamed to devel/autoconf-switch and devel/autoconf2.13 respectively. If your favourite port updating tool cannot handle that then just remove the packages with "pkg delete" and then install the new port. 20220607: AFFECTS: security/openssh-portable AUTHOR: bdrewery@FreeBSD.org OpenSSH has been updated to 9.0p1 with incompatible changes. See https://www.openssh.com/txt/release-9.0 for details. 20220602: AFFECTS: sysutils/graylog AUTHOR: dch@FreeBSD.org Graylog 4.3.0+ fails to start if graylog's internal collector for system statistics is enabled. This will eventually be addressed upstream. Add disable_native_system_stats_collector=true to your graylog.conf. 20220513: AFFECTS: devel/nexus2-oss AUTHOR: michael.osipov@siemens.com Nexus 2.15.x introduces incompatible configuration changes. You must review changes in ETCDIR/wrapper.conf and ETCDIR/jetty*.xml with updated samples as well as NEXUS_WORKDIR/conf/logback-nexus.xml with its origin from DATADIR/nexus/WEB-INF/lib/nexus-core-VERSION.jar!/META-INF/log/logback-nexus.xml, grant write access to files in ETCDIR since Nexus itself might update files in place otherwise your instance will not properly work after the update. 20220510 AFFECTS: sysutils/zrepl AUTHOR: monwarez@gmail.com The zrepl update to 0.5.0.8 includes the following breaking changes: - The Prometheus metric zrepl_version_daemon was converted to zrepl_start_time The metric still reports the zrepl version in a label. But the metric *value* is now the Unix timestamp at the time the daemon was started. The Grafana dashboard in zrepl examples directory has been updated. 20220502: AFFECTS: mail/mutt AUTHOR: dereks@lifeofadishwasher.com Default header cache option has been changed to the new option LMDB using databases/lmdb. The BDB option still exists but now uses databases/db18 due to the EOL of databases/db5. 20220501: AFFECTS: users of drm-current-kmod and drm-devel-kmod AUTHOR: manu@FreeBSD.org Both ports where removed. If you were using either one of them directly (i.e. without using graphics/drm-kmod metaport) use graphics/drm-510-kmod. If you have some problems with this one try drm-54-kmod and report a bug on https://github.com/freebsd/drm-kmod. 20220428: AFFECTS: users of databases/redis AUTHOR: yasu@FreeBSD.org The databases/redis port has been updated to 7.0. Users wanting to stay on 6.2 can replace databases/redis with databases/redis62 with one of the following commands. If you use pkg with binary packages: # pkg set -o databases/redis:databases/redis62 # pkg upgrade If you use portmaster: # portmaster -o databases/redis62 databases/redis If you use portupgrade: # portupgrade -o databases/redis62 databases/redis 20220426: AFFECTS: users of deskutils/grantleetheme AUTHOR: kde@FreeBSD.org The pkg update of deskutils/grantleetheme to 22.04 can fail due to a filesystem location having changed from being a file to being a directory. This leads to pkg's temporary file creation throwing an error. To update to KDE Gear 22.04 please run # pkg delete -f grantleetheme prior to the update. 20220424: AFFECTS: users of emulators/qemu AUTHOR: bofh@FreeBSD.org emulators/qemu has been updated to 7.0.0. Previous 6.2.X branch has been repocopied to emulators/qemu6. If someone wants to stick with 6.2.X branch please use one of the following command: # pkg install qemu6/qemu6-nox11(based on flavor used) or # portmaster -o emulators/qemu6 emulators/qemu or # portupgrade -o emulators/qemu6 emulators/qemu 20220421: AFFECTS: users of lang/ruby27 AUTHOR: yasu@FreeBSD.org The default ruby version has been updated from 2.7 to 3.0. If you compile your own ports you may keep 2.7 as the default version by adding the following lines to your /etc/make.conf file: # # Keep ruby 2.7 as default version # DEFAULT_VERSIONS+=ruby=2.7 If you wish to update to the new default version, you need to first stop any software that uses ruby. Then, you will need to follow these steps, depending upon how you manage your system. If you use pkg, simply upgrade: # pkg upgrade If you do not use pkg, please check entry 20190420. The description there should also work for this version. 20220413: AFFECTS: users of net-im/py-matrix-synapse AUTHOR: ports@skyforge.at Synapse will now refuse to start up if open registration is enabled, in order to help mitigate abuse across the federation. If you would like to provide registration to anyone, consider adding email, recaptcha or token-based verification in order to prevent automated registration from bad actors. This check can be disabled by setting the enable_registration_without_verification option in your homeserver configuration file to true. More details are available in the upgrade notes[0]. Synapse will additionally now refuse to start when using PostgreSQL with a non-C values for COLLATE and CTYPE, unless the config flag allow_unsafe_locale, found in the database section of the configuration file, is set to true. See the upgrade notes[1] for details. [0] https://matrix-org.github.io/synapse/v1.56/upgrade.html#open-registration-without-verification-is-now-disabled-by-default [1] https://matrix-org.github.io/synapse/v1.56/upgrade#change-in-behaviour-for-postgresql-databases-with-unsafe-locale 20220410: AFFECTS: users of sysutils/screen AUTHOR: cy@FreeBSD.org As of sysutils/screen-4.9.0_5, the MULTUSER option is default, reverting to the traditional setuid-root behavior. People who wish to secure their screen install must terminate all screen sessions, then install screen without the MULTIUSER option. The option was reversed because it caused too much astonishment among users of screen. 20220401: AFFECTS: security/sshguard AUTHOR: kevinz5000@gmail.com Blacklisting is now disabled by default to avoid overriding the setting in sshguard.conf. To enable blacklisting, uncomment the BLACKLIST_FILE line in sshguard.conf. 20220329: AFFECTS: users of sysutils/screen AUTHOR: cy@FreeBSD.org As of sysutils/screen-4.9.0_3, the multiuser feature is not supported by default. The multiuser feature requires setuid root to function. This creates a security risk. Some Linux distributions have had non-setuuid root screen for a dozen or more years. FreeBSD is following suit. A new MULTIUSER option has been added to enable users to install setuid root screen. The MULTIUSER option default is OFF. Users who wish to use the multiuser feature may, - Build screen using the MULTIUSER option, or - Poudriere users can use poudriere-options to enable the MULTIUSER option, or - Users can chmod the setuid bit for ${LOCALBASE}/bin/screen-4.9.0, making screen setuid root to enable the multiuser feature. 20220326: AFFECTS: users of misc/freebsd-doc-* AUTHOR: blackend@FreeBSD.org A change to the doc toolchain prevents the build of individual localized HTML versions of the documentation without building the en_US version. HTML option is currently disabled until a good solution is found. PDF version, the default option, is now the only available option. Please re-run "make config" to pick up this new default. 20220313: AFFECTS: users of net/unison AUTHOR: madpilot@FreeBSD.org unison has been updated to version 2.52. The new version introduces a new wire protocol and on disk archive format. This new version is compatible with 2.51 clients for communication, so it's now possible to upgrade one side and then the other. The archive files are automatically converted to the new version, but once they are converted the y are incompatible with the previous version. In case you need version 2.51, the previous version of the port is preserved in net/unison251. 20220311: AFFECTS: users of multimedia/get_iplayer AUTHOR: jamie@catflap.org get_iplayer has a number of changes to quality settings that may break existing configurations. Please see the release notes for further information: https://github.com/get-iplayer/get_iplayer/wiki/release320to329#release329 20220311: AFFECTS: users of emulators/virtualbox-ose AUTHOR: grembo@FreeBSD.org In order to comply to hier(7), VirtualBox's configuration of non-default IP ranges to be used in host-only mode moved from /etc/vbox/networks.conf to ${LOCALBASE}/etc/vbox/networks.conf. 20220311: AFFECTS: users of net/nats-server AUTHOR: olgeni@FreeBSD.org A dedicated 'nats' user was added, replacing 'nobody' in the startup script. You should check your configuration and assign updated ownership to your data files. 20220227: AFFECTS: users of graphics/bmeps AUTHOR: takefu@airport.fm The binary and man page have been renamed from bmpp{.1.gz} to bitmap2pp{.1.gz} 20220225: AFFECTS: users of x11-toolkits/py-wxPython40 AUTHOR: lbartoletti@FreeBSD.org x11-toolkits/py-wxPython40 has been removed to be replaced by the 4.1 version. However the new wxPython ports is now named x11-toolkits/py-wxPython4. Depending on the tools you use, you may have to remove the port before ports upgrade. 20220224: AFFECTS: users of net-im/openfire AUTHOR: nikita@druba.su The port version have been updated from 4.6.x to 4.7.x. It is recommended to do database and configs backup before updating. 20220219: AFFECTS: users of sysutils/intel-pcm-devel AUTHOR: egypcio@FreeBSD.org sysutils/intel-pcm-devel became quite obsolete once sysutils/intel-pcm is now pretty much following a constant and stable update cycle, so users of the -devel version are encouraged to switch to it. If you still have sysutils/intel-pcm-devel installed, please delete it from your system and install sysutils/intel-pcm instead: # pkg delete sysutils/intel-pcm-devel # pkg install sysutils/intel-pcm 20220219: AFFECTS: users of math/qhull* AUTHOR: stephen@FreeBSD.org Because of entries in MOVED, portupgrade can get confused updating qhull. It is recommended that you delete qhull and ports depending upon it, and then reinstalling all the dependent ports. 20220218: AFFECTS: users of TeX* AUTHOR: bofh@FreeBSD.org TeX system has been updated to 2021 from 2015. Normal pkg upgrade or portmaster -a should handle all the upgrade properly. In case not please create a ticket or send a mail to tex@FreeBSD.org print/tex-aleph has been removed as per upstream. This package should be removed manually. Additionally users have reported to delete texlive-texmf prior to starting update, or pkg-static will indicate there is a conflict during the upgrade of texlive-base : # pkg remove tex-aleph texlive-texmf 20220218: AFFECTS: users of net-mgmt/librenms AUTHOR: dvl@FreeBSD.org The storage directory has moved from WWWDIR to /var/db/librenms/storage to comply with man 7 hier. When upgrading, you may need to manually create this symlink. 20220212: AFFECTS: users of lang/php8[01][-extensions]? AUTHOR: bofh@FreeBSD.org Non-Default OPTION MYSQL80 has been removed in lieu of making php8[01]-openssl as part of DEFAULT php8[01] installation. Although for php74 it is not the case. Ports that depends on security/php8[01]-openssl will no longer be installed as these have been removed. There is no side effect of this for ports which have USE_PHP=openssl. In case for php74 as the default php74-openssl will be installed otherwise it will be used from php installation. If you are using pkg, you have to remove php8[01]-openssl manually after the upgrade : # pkg info \*php8\* > ~/installed-php-ports-list # pkg upgrade -y # pkg delete -f php8[01]-openssl # service -R While rebuilding from ports users old php.conf is not overwritten. So have to manually remove the ports. For portmaster users: # sh # REINSTALL="$(pkg info -o "*php80*" | grep -v openssl | awk '{printf "%s ", $2}')" # pkg delete -f "*php80*" # portmaster $REINSTALL # portmaster -a 20220207: AFFECTS: users of security/amavisd-new AUTHOR: flo@FreeBSD.org Amavis does now depend on archivers/7-zip (7zz) you might need to update your amavisd.conf and replace all ocurances of p7zip (7zr) accordingly. 20220129: AFFECTS: users of editors/neovim AUTHOR: adamw@FreeBSD.org Neovim now uses luajit-openresty as the Lua provider. Many neovim plugins compile some of their code (Packer does this, as do many LSP plugins). Neovim will produce errors and fail to load the plugins. Deleting and reinstalling any plugins that produce errors should fix the startup. If you use Packer, you also want to delete the startup cache: # rm -rf ~/.config/nvim/plugin/packer_compiled.lua 20220128: AFFECTS: users of x11-fonts/source-sans-ttf AUTHOR: fernape@FreeBSD.org The font name has changed its prefix from SourceSansPro* to SourceSans*. Users of this font might need to change their configurations to pick up the new names. 20220128: AFFECTS: users of net-im/dendrite AUTHOR: ashish@FreeBSD.org The configuration needs to be updated to version 2 following upgrade to Dendrite v0.6. Please refer to /usr/local/etc/dendrite/dendrite.yaml.sample for a sample configuration. 20220127: AFFECTS: users of PyQt AUTHOR: kde@FreeBSD.org Most of the PyQt ports have been merged into single port devel/py-qt5-pyqt. `pkg upgrade` will handle update automatically . 20220126: AFFECTS: users of mail/bogofilter, mail/bogofilter-lmdb AUTHOR: mandree@FreeBSD.org The default version of mail/bogofilter now uses LMDB instead of Berkeley DB. It is not compatible and cannot read databases. Your options are: 1. use bogoutil on each wordlist for each of your users first, ONLY THEN reinstall bogofilter, THEN reload the databases with bogoutil, OR 2. install the matching bogofilter version and If you had been using bogofilter-lmdb so far, install bogofilter. If you had been using bogofilter so far, install bogofilter-bdb. 20220125: AFFECTS: users of lang/php74 AUTHOR: tz@FreeBSD.org The default version of PHP has been switched from 7.4 to 8.0. If you use binary packages you should make a list of php packages before running 'pkg upgrade': # pkg info \*php7\* > ~/installed-php-ports-list After the upgrade, check with such list if all your php extensions are still installed, and reinstall them if needed. If you use mod_php74 you need to deinstall it and install mod_php80. 20220120: AFFECTS: users of x11-wm/dwm AUTHOR: 0mp@FreeBSD.org dwm has been updated to 6.3. The option RUGAPS is no longer available because it depends on a patch only available for version 6.2. RUGAPS can be reintroduced if desired once it is ported to 6.3 by the interested party. 20220118: AFFECTS: users of net-mgmt/netbox AUTHOR: kai@FreeBSD.org 1. Please make sure that the PostgreSQL server for the NetBox instance is running version 10 or higher. This is because PostgreSQL 9.6 is End-of-Life since November 2021 and NetBox 3.1 makes use of the "macaddr8" field which was introduced with PostgreSQL 10. 2. Please also check the pkg-message and the changelogs for further info. 20220110: AFFECTS: users of security/bastillion AUTHOR: netchild@FreeBSD.org If you already performed the actions of the next entry, the following action in this entry needs to be performed regardless. If you did not already perform the actions of the next entry, only the action of this entry needs to be performed. The datastore of bastillion needs to be upgraded (if you do not see users / can not login, you forgot to upgrade it): java -jar %%PREFIX%%/jetty_bastillion/upgrade/bastillion-upgrade-4.00.01.jar %%PREFIX%%/jetty_bastillion/bastillion/WEB-INF/classes/BastillionConfig.properties 20220104: AFFECTS: users of security/bastillion AUTHOR: netchild@FreeBSD.org The datastore of bastillion needs to be upgraded (if you do not see users / can not login, you forgot to upgrade it): java -jar %%PREFIX%%/jetty_bastillion/upgrade/bastillion-upgrade-4.00.00.jar %%PREFIX%%/jetty_bastillion/bastillion/WEB-INF/classes/BastillionConfig.properties 20220102: AFFECTS: users of sysutils/py-azure-cli AUTHOR: dbaio@FreeBSD.org When upgrading to Azure CLI v2.31.0, you will need to re-authenticate on Azure services. $ az login --use-device-code Starting in version 2.30.0, Azure CLI uses MSAL as the underlying authentication library. MSAL uses AAD v2.0 authentication flow to provide more functionality and increases security for token cache. More info: https://docs.microsoft.com/en-us/cli/azure/msal-based-azure-cli 20211220: AFFECTS: users of devel/notcurses AUTHOR: nickblack@linux.com Notcurses 3 introduces a new SONAME and significant API/ABI changes. Dependent applications must be recompiled at a minimum. A complete guide to updating for the new API is available under "Porting API2 Applications to API3" at https://github.com/dankamongmen/notcurses/releases/tag/v3.0.0 20211220: AFFECTS: users of net-im/openfire AUTHOR: nikita@druba.su The port options have been renamed to be more readable. When not using the default options, they have to be regenerated. # cd /usr/ports/net-im/openfire # make config 20211213: AFFECTS: users of emulators/qemu-utils AUTHOR: bofh@FreeBSD.org New port emulators/qemu@tools has been introduced which is similar to emulators/qemu-utils. qemu-utils has also been DEPRECATED in favor for this as it's MASTER port has also been marked DEPRECATED and set to expire on 2022-01-09. For updating to qemu-tools please use one of the following command: # pkg install qemu-tools or # portmaster -o emulators/qemu-utils emulators/qemu@tools 20211116: AFFECTS: users of emulators/qemu50 AUTHOR: bofh@FreeBSD.org emulators/qemu50 has been moved to emulators/qemu5 and updated to 5.2.0 which is the last version from 5.X.X branch. This is done in preparation of updating emulators/qemu into latest 6.X branch. If someone wants to stick with 5.X.X branch please use one of the following command: # pkg install qemu5 or # portmaster -o emulators/qemu50 emulators/qemu5 This version also introduces a stripped nox11 version which can be installed with: # pkg install qemu5-nox11 or # portmaster emulators/qemu5@nox11 20211115: AFFECTS: AFFECTS: users of *-emacs2x-* packages AUTHOR: jrm@FreeBSD.org To avoid problems when editors/emacs or editors/emacs-devel are updated, the emacs major version has been removed from these package names. For example, the old and new package names of devel/magit are ----------------------------------------------------------- | Old Package Name | New Package Name | |-------------------------- |-----------------------------| | magit-emacs27 | magit | | magit-emacs27_nox | magit-emacs_nox | | magit-emacs27_canna | magit-emacs_canna | | | | | magit-emacs29_nox | magit-emacs_devel_nox | | magit-emacs29 | magit-emacs_devel | ----------------------------------------------------------- To handle these final package name changes, follow a similar procedure as the one described in the 20200811 entry. That is, simply running `pkg upgrade` will not upgrade, e.g., foo-emacs27_nox to foo-emacs_nox. Binary package users: To update these packages, run these commands under /bin/sh with superuser privileges before upgrading. # default flavor of editors/emacs installed for i in $(pkg query -g %n '*-emacs27'); do if [ "$i" != "notmuch-emacs27" ]; then nn=$(echo "$i" | sed -e 's/-emacs27//') else nn=$(echo "$i" | sed -e 's/-emacs27/-emacs/') fi pkg set -yn "$i":"$nn" done # canna or nox flavor of editors/emacs installed for i in $(pkg query -g %n '*-emacs27*'); do nn=$(echo "$i" | sed -e 's/emacs27/emacs/') pkg set -yn "$i":"$nn" done # editors/emacs-devel installed for i in $(pkg query -g %n '*-emacs29*'); do nn=$(echo "$i" | sed -e 's/emacs29/emacs_devel/') pkg set -yn "$i":"$nn" done portmaster users: portmaster -r emacs 20211110: AFFECTS: users of www/node*, www/npm*, www/yarn* AUTHOR: mfechner@FreeBSD.org The port framework was updated to use a default version for nodejs. The default version is pointing to the latest LTS version which is currently version 16. You can overwrite this by defining in /etc/make.conf, e.g. version 17: DEFAULT_VERSIONS=nodejs=17 Or if you would like to stick always to the current version use: DEFAULT_VERSIONS=nodejs=current If you would like to use yarn or npm together with nodejs version 17, just install the package that is pulling the wanted dependency to nodejs: # pkg install yarn-node17 # pkg install npm-node17 20211109: AFFECTS: users of security/libressl AUTHOR: brnrd@FreeBSD.org The port has been updated to the latest stable version 3.4 of LibreSSL. The shared library versions of the libraries have been bumped. After upgrading, manually update all packages that depend on any of the libraries provided by LibreSSL (libssl, libcrypto and libtls) since the versions of these libraries have changed. Normally, you can obtain the list of dependent software by running the following command: # pkg info -r libressl Then you should rebuild all ports depending on libressl to avoid dangling shared library dependencies. 20211107: AFFECTS: users of sysutils/devcpu-data AUTHOR: jrm@FreeBSD.org The RC variable name microcode_cpus is now deprecated. Users should instead use the variable microcode_update_cpus. Two new ports were branched from sysutils/devcpu-data, sysustils/devcpu-data-amd and sysustils/devcpu-data-intel. The two new ports contain only the CPU microcode updates for each vendor and sysutils/devcpu-data now only contains an RC script. Both new ports are on-by-default, optional dependencies of sysutils/devcpu-data. 20211101: AFFECTS: users of textproc/redisearch AUTHOR: osa@FreeBSD.org The textproc/redisearch port has been updated to the recent stable release - v2.2. Users wanting to stay on v2.0 can replace textproc/redisearch with textproc/redisearch20 with one of the following commands: # pkg install textproc/redisearch20 or # portmaster -o textproc/redisearch20 textproc/redisearch or # portupgrade -o textproc/redisearch20 textproc/redisearch NOTE: The textproc/redisearch20 brings a new name for the module, i.e. redisearch20.so, so be careful. 20211024: AFFECTS: sysutils/beats7 AUTHOR: otis@FreeBSD.org The following breaking changes apply to beats 7.15.0 and newer: - All beats: Loading Kibana assets (dashboards, index templates) rely on Saved Object API. So to provide a reliable service, Beats can only import and export dashboards using at least Kibana 7.15. - Filebeat: - Remove all alias fields pointing to ECS fields from modules. This affects the Suricata and Traefik modules. - Fix Crowdstrike ingest pipeline that was creating flattened process fields. - Rename log.path to log.file.path in filestream to be consistent with log input and ECS. - Heartbeat: - Remove long deprecated watch_poll functionality. - Fix inconsistency in event.dataset values between heartbeat and fleet by always setting this value to the monitor type / fleet dataset. - Metricbeat: - Fix Elasticsearch jvm.gc.collectors.old being exposed as young Full changelog: https://www.elastic.co/guide/en/beats/libbeat/current/release-notes-7.15.0.html https://www.elastic.co/guide/en/beats/libbeat/current/release-notes-7.15.1.html 20211024: AFFECTS: users of databases/postgresql* and other software using PostgreSQL to run AUTHOR: kbowling@FreeBSD.org The default version of PostgreSQL has been switched from 12 to 13. The upgrade procedure can use up twice the space the databases currently needs. If you have a big amount of stored data take a closer look at the manpage of pg_upgrade for avoidance and/or speedup of the upgrade. The upgrade instructions consider a basic usage and do not match complex scenarios like replication, sharding, or similar. Upgrade instructions: First stop your PostgreSQL, create PostgreSQL-binaries and backup your data. If you have another Version of PostgreSQL installed, for example 12.8, your files are named according to this. # service postgresql stop # pkg create postgresql12-server postgresql12-contrib # mkdir /tmp/pg-upgrade # tar xf postgresql12-server-12.8.pkg -C /tmp/pg-upgrade # tar xf postgresql12-contrib-12.8.pkg -C /tmp/pg-upgrade # pkg delete -f databases/postgresql12-server databases/postgresql12-contrib databases/postgresql12-client Now update PostgreSQL: pkg user: # pkg install databases/postgresql13-server databases/postgresql13-contrib # pkg upgrade Portmaster users: # portmaster databases/postgresql13-server databases/postgresql13-contrib # portmaster -a Portupgrade users: # portinstall databases/postgresql13-server databases/postgresql13-contrib # portupgrade -a After installing the new PostgreSQL version you need to convert all your databases to new version: # su -l postgres -c "/usr/local/bin/initdb --encoding=utf-8 --lc-collate=C -D /var/db/postgres/data13 -U postgres" # su -l postgres -c "pg_upgrade -b /tmp/pg-upgrade/usr/local/bin/ -d /var/db/postgres/data12/ -B /usr/local/bin/ -D /var/db/postgres/data13/ -U postgres " Now the migration is finished. You can start PostgreSQL again with: # service postgresql start ATTENTION: 1) The default user changed from "pgsql" to "postgres" in 11. The migration steps above now assume the "postgres" database user and FreeBSD user. 2) See the updating entry 20190829 if you are updating from a release prior to 11. 3) If you use non-default initdb options, you have to adjust the initdb-command accordingly 20211023: AFFECTS: users of www/node AUTHOR: bhughes@FreeBSD.org The www/node port has been updated to Node.js v17.0.0, the latest upstream release. A new port, www/node16, has been created for the upcoming v16.x LTS branch. Users wanting to stay on v16.x can replace www/node with www/node16 with one of the following commands: # pkg install www/node16 or # portmaster -o www/node16 www/node or # portupgrade -o www/node16 www/node 20211012: AFFECTS: users of devel/git AUTHOR: garga@FreeBSD.org devel/git port was split into multiple sub-ports that depend on devel/git and install additional files: - devel/git-cvs - CVS related scripts and man pages - devel/git-gui - GUI related scripts and man pages - devel/git-p4 - Perforce related scripts and man pages - devel/git-svn - Subversion related scripts and man pages Due to these changes, CVS, GUI, PERFORCE, and SUBVERSION options as well as gui and svn flavors were removed from the port. 20211010: AFFECTS: users of gtk2 flavored devel/geany* AUTHOR: madpilot@FreeBSD.org Upstream dropped support for gtk2. Due to this the ports are now unflavored, installing only with gtk3 support. If you are already using the default gtk3 flavor will get the new version with a simple "pkg upgrade". To upgrade when using the gtk2 flavors you need to use "pkg install" to install the new unflavored gtk3 packages, pkg will automatically uninstall the old gtk2 flavors. If using ports, you will need to uninstall all geany packages and its plugins and reinstall from an updated ports tree. The "geany-plugin-multiterm" plugin was only available as a gtk2 flavor when installing the gtk2 flavor of geany and has not been ported to gtk3, so has been removed from the tree, so the geany-plugin-multiterm-gtk2 package should be removed from the system. 20211007: AFFECTS: user of security/clamav AUTHOR: yasu@FreeBSD.org Upstream changed end-of-life policy and introduced long time support (LTS) feature release. * LTS feature release will be identified approximately every two years and supported for at least three years from the initial publication date of that LTS feature version. * Regular (non-LTS) feature releases will be supported for at least four months from the initial publication date of the next feature release or until the feature release after that is published. According to it new port security/clamav-lts is added for users who want to use LTS version of ClamAV. Users wanting to switch to LTS version can replace security/clamav with security/clamav-lts with one of following commands. If you use pkg with binary packages: # pkg set -o security/clamav:security/clamav-lts # pkg upgrade If you use portmaster: # portmaster -o security/clamav-lts security/clamav If you use portupgrade: # portupgrade -o security/clamav-lts security/clamav 20211006: AFFECTS: users of misc/freebsd-doc-* AUTHOR: blackend@FreeBSD.org The misc/freebsd-doc-* ports have been updated to the new doc toolchain, and use a somewhat different arrangement of directories and symlinks, which pkg 1.17 does not handle well. Users are encouraged to delete the misc/freebsd-doc-* ports, then reinstall the new ones without using the pkg upgrade facility. 20211006: AFFECTS: users of net/kafkacat AUTHOR: sergey@akhmatov.ru kafkacat has been renamed to kcat upstream. So switch to net/kcat instead. 20211004: AFFECTS: users of net-mgmt/netbox AUTHOR: kai@FreeBSD.org /!\ WARNING /!\ The NetBox 3.0 release contains major changes, so at least items 1.), 2.) and 3.) must be checked before proceeding with the upgrade! /!\ WARNING /!\ 1. Please ensure that your local installation of net-mgmt/netbox is at the 2.11 release before attempting to upgrade to NetBox 3.0 or later. 2. Please also note that the previously deprecated secrets functionality has been removed with NetBox 3.0. This means, all of the secrets still remain in the database once upgraded, only the secrets functionality on the part of NetBox is no longer given. In order to continue to be able to access the stored secrets as usual (and then possibly migrate them to another solution, e.g. security/vault), please install the security/py-netbox-secretstore port once NetBox has been upgraded to 3.x and follow its installation instructions how to enable the plugin. 3. If plugins are used, they should be temporarily deactivated to avoid disruptions during the upgrade process. 4. Please also check the pkg-message and the changelogs for further info. 20211004: AFFECTS: users of www/py-pyjwt AUTHOR: rhurlin@FreeBSD.org To make it possible to easily import py-pyjwt v2.x the current port was moved to a versioned directory. If you use portmaster: portmaster -o www/py-pyjwt1 www/py-pyjwt If you use portupgrade: portupgrade -fo www/py-pyjwt1 www/py-pyjwt If you use pkg with binary packages: pkg set -o www/py-pyjwt:www/py-pyjwt1 20210912: AFFECTS: x11-wm/cage, x11-wm/hikari, x11-wm/labwc, x11-wm/sway, x11-wm/wayfire AUTHOR: jbeich@FreeBSD.org SUID option has been removed in favor of seatd-launch(1) which doesn't require special handling in every consumer and doesn't bypass group permissions. If you've already enabled seatd service or use consolekit2 then nothing changes. Otherwise, $ sway 00:00:00.001 [ERROR] [wlr] [libseat] [libseat/libseat.c:83] No backend was able to open a seat 00:00:00.001 [ERROR] [wlr] [backend/session/session.c:84] Unable to create seat: Function not implemented 00:00:00.001 [ERROR] [wlr] [backend/session/session.c:218] Failed to load session backend 00:00:00.001 [ERROR] [wlr] [backend/backend.c:353] Failed to start a DRM session 00:00:00.001 [ERROR] [sway/server.c:53] Unable to create backend can be fixed by $ ck-launch-session sway or $ seatd-launch sway or # sysrc seatd_enable=YES # service seatd start $ sway Replace "sway" with your compositor e.g., "cage", "hikari", "labwc", "wayfire". 20210907: AFFECTS: consumers of math/eigen[23] AUTHOR: adridg@FreeBSD.org math/eigen2 has been marked deprecated. There do not seem to be any consumers in FreeBSD ports. math/eigen3 has had its options re-vamped. The default options previously pulled in multiple useless library dependencies. The options also forced a specific BLAS implementation. The new options depend only on the default BLAS (whatever USES=blaslapack picks), but this can be turned off. The previous multiple useless libraries -- which are not useless when running the tests in Eigen -- are now hidden behind the default-off TEST option. Users of a carefully-tuned Eigen build should re-evaluate the options available. 20210902: AFFECTS: users of editors/vim AUTHOR: adamw@FreeBSD.org The vim ports have been completely reworked to take advantage of flavors. The biggest change is that the `vim' package is now console-only. If you want the GTk3 GUI, you'll need to install the `vim-gtk3' package instead. All the GUI toolkits have their own package now: vim-gtk3, vim-gtk2, -athena, -motif, and -x11. The vim-tiny package still exists. Also: only python3 bindings are included now. There are very few plugins written in Perl or Ruby, so there really wasn't a need to bundle those languages with Vim. They still exist as OPTIONS, so you can still enable them if you'd like. Also, support for py27 has been dropped. 20210901: AFFECTS: users of audio/ampache AUTHOR: crees@FreeBSD.org With the upgrade to Ampache 5.0.0, the root Ampache folder has changed to %%WWWDIR%%/ampache/public. Please update your web server aliases, for example if you use Apache, then in httpd.conf make sure the lines look like this: Alias /ampache /usr/local/www/ampache/public If you have customised your .htaccess files to allow for a different alias, you'll need to move them to the new location after upgrading: # sh -c 'cd /usr/local/www/ampache && for f in */.htaccess; do mv $f public/$f; done' More upgrade notes can be found on Github: https://github.com/ampache/ampache/releases/tag/5.0.0 20210823: AFFECTS: users of mail/mu AUTHOR: hrs@FreeBSD.org mail/mu now uses XDG Base Directory Specification for the default locations for various files. The mu database now lives under ~/.cache/mu rather than ~/.mu by default. After upgrading, move the contents under ~/.mu to ~/.cache/mu. 20210823: AFFECTS: users of mail/postfixadmin AUTHOR: ports.maintainer@evilphi.com The 3.2->3.3 upgrade requires generating a new setup password hash. The normal post-upgrade visit to setup.php will walk you through the steps. For more information, see the "Version 3.3" section of the change log: https://github.com/postfixadmin/postfixadmin/blob/postfixadmin-3.3.9/CHANGELOG.TXT 20210818: AFFECTS: users of databases/redis AUTHOR: osa@FreeBSD.org The databases/redis port has been updated to the recent stable release. Users wanting to stay on v6.0 can replace databases/redis with databases/redis6 with one of the following commands: # pkg install databases/redis6 or # portmaster -o databases/redis6 databases/redis or # portupgrade -o databases/redis6 databases/redis 20210805: AFFECTS: users of sysutils/beats7 AUTHOR: otis@FreeBSD.org Beats may not be sending data to some distributions of Elasticsearch In this release, Elastic is enabling a licensing change that was broadly communicated earlier in 2021. This change would imply that 7.13 instances of Beats would fail to connect to 7.10 or earlier open source distributions of Elasticsearch and Kibana. The most visible effect is that sysutils/beats7 users can expect difficulties to send data to Elastic instances hosted in AWS. For more information, see: https://www.elastic.co/guide/en/beats/libbeat/current/breaking-changes-7.13.html 20210801: AFFECTS: users of OpenLDAP AUTHOR: delphij@FreeBSD.org SASL is now always enabled for OpenLDAP. If you use portmaster: portmaster -o net/openldap24-client openldap-sasl-client If you use portupgrade: portupgrade -fo net/openldap24-client openldap-sasl-client If you use pkg with binary packages: pkg set -o net/openldap24-sasl-client:net/openldap24-client 20210730: AFFECTS: users of multimedia/mlt, multimedia/mlt-qt and multimedia/py-mlt AUTHOR: kde@FreeBSD.org multimedia/{py-,}mlt{-qt5,} has been moved to multimedia/{py-,}mlt6{-qt5,} to make room for importin the next major version of the mlt framework. 20210721: AFFECTS: users of x11/rxvt-unicode AUTHOR: thierry@FreeBSD.org Since 9.26, there is a regression in resource parsing, which no longer accepts a prefix of the form "URxvt*keysym" ("*." is equivalent to "*"). Changing "*." to "." should make your bindings work again. 20210704: AFFECTS: users of misc/qtchooser AUTHOR: kde@FreeBSD.org QtChooser allows you to select your version of Qt among those installed. However, this tool is no longer supported upstream and will not be available for Qt6. By default, our Qt installations are done in: ${LOCALBASE}/lib/qt${QT_VERSION} as recommended. We have added symbolic linking for the main binaries to ${LOCALBASE}/bin with the suffix -qt5. 20210628: AFFECTS: users of misc/openhab AUTHOR: netchild@FreeBSD.org You need to run sed -i -e 's:^karaf.framework.equinox=.*:karaf.framework.equinox=mvn\:org.eclipse.platform/org.eclipse.osgi/3.16.200: ; s:^karaf.framework.felix=.*:karaf.framework.felix=mvn\:org.apache.felix/org.apache.felix.framework/6.0.4:' /var/db/openhab/userdata/etc/config.properties to update the version numbers of some components in a config file. 20210621: AFFECTS: users of www/gitlab-ce AUTHOR: mfechner@FreeBSD.org The upgrade of Gitlab 14.0.0 is in preparation. You must upgrade first to 13.12. For more information see here: https://about.gitlab.com/blog/2021/06/04/gitlab-moving-to-14-breaking-changes/ To do the upgrade, make sure you follow the upgrade manuals: https://gitlab.fechner.net/mfechner/Gitlab-docu/-/tree/master/update I will merge the 14.0.0 upgrade later to quarterly branch to give you some time for the upgrade to 13.12. 20210620: AFFECTS: users of misc/openhab2 AUTHOR: netchild@FreeBSD.org The openhab v3 port has been committed. Upstream has removed the version from the name, as such the FreeBSD port follows in all places (start script name, directory names, ...). Users are encouraged to migrate from misc/openhab2 to misc/openhab. No automatic config migration is available Both versions can be installed in parallel, but an users has to take care to not run both at the same time on the same port. 20210617: AFFECTS: users of graphics/mesa-libs and x11/nvidia-driver AUTHOR: kbowling@FreeBSD.org Some libraries from mesa-libs are now provided by libglvnd while others were renamed. nvidia-driver already used libglvnd but bundled a copy which is now provided as a separate package. When building outside poudriere make sure to remove mesa-libs and nvidia-driver first in order to avoid conflict with libglvnd. For portmaster users: # pkg delete -f mesa-libs nvidia-driver # portmaster -a For portupgrade users: # pkg delete -f mesa-libs nvidia-driver # portupgrade -a 20210523: AFFECTS: users of www/tt-rss AUTHOR: dereks@lifeofadishwasher.com tt-rss config.php syntax has changed. You can find detailed changes here https://tt-rss.org/wiki/GlobalConfig or look at config.php.sample. Expect your config.php to not work with newer www/tt-rss releases. Due to changes in ttrssd before updating you should stop ttrssd or otherwise kill the php process running update_daemon2.php. 20210516: AFFECTS: users of security/bitwarden_rs AUTHOR: mr@FreeBSD.org bitwarden_rs has been renamed to vaultwarden upstream. So switch to security/vaultwarden instead. 20210515: AFFECTS: users of databases/postgresql??-server AUTHOR: girgen@FreeBSD.org The rc.conf parameter for the login class of the postgresql daemon has changed name from postgresql_class to postgresql_login_class. rc.subr(8) states that the parameter should be named ${name}_login_class. 20210512: AFFECTS: users of sysutils/ansible* AUTHOR: 0mp@FreeBSD.org Ansible has been updated to 3.3.0. Please follow the porting guide to update the rulesets: https://docs.ansible.com/ansible/devel/porting_guides/porting_guide_3.html 20210508: AFFECTS: users of devel/pycharm-ce AUTHOR: bsam@FreeBSD.org Pycharm-ce has switched to the supported java version 11. 20210506: AFFECTS: users of mail/postfix AUTHOR: ohauer@FreeBSD.org Postfix 3.6 and higher requires minimum OpenSSL 1.1.1 FreeBSD 11 users using base OpenSSL can switch to mail/postfix35 If you wish to use postfix35 until FreeBSD 11 EoL you might run the following command: # pkg set -o mail/postfix:mail/postfix35 # pkg upgrade 20210505: AFFECTS: users of sysutils/terraform AUTHOR: 0mp@FreeBSD.org Terraform has been updated from 0.13 to 0.15, which introduces several incompatible changes. Please follow upgrading guide when updating the package. https://www.terraform.io/upgrade-guides/0-14.html https://www.terraform.io/upgrade-guides/0-15.html 20210426: AFFECTS: users of x11-fonts/iosevka AUTHOR: 0mp@FreeBSD.org The selection of options for Iosevka has become less granular as the port has switched from TTF-based distfiles to super-TTC-based distfiles. Now all the spacing variants are contained within one file for each Iosevka style. 20210425: AFFECTS: users of python AUTHOR: kai@FreeBSD.org The default version of python3 and python was switched to 3.8. For ports users wanting to keep version 3.7 as default, add DEFAULT_VERSIONS+= python=3.7 python3=3.7 to make.conf Following procedures may ease the upgrade: For users of pre-build packages: # sh # for i in $(pkg query -g %n 'py37-*'); do pkg set -yn ${i}:py38-${i#py37-}; done # pkg upgrade For portmaster users: # sh # portmaster -o lang/python38 python37 # REINSTALL="$(pkg info -o "*py37*" | awk '{printf "%s ", $2}')" # pkg delete -f "*py37*" # portmaster $REINSTALL # REBUILD=$(pkg query -g "%n:%dn" '*' | grep py3 | grep -v py38 | cut -d : -f 1 | sort -u) # portmaster $REBUILD # REBUILD2=$(pkg list | grep python-37 | xargs pkg which | awk '{print $6}' | sort -u) # portmaster $REBUILD2 20210420: AFFECTS: users of www/node AUTHOR: bhughes@FreeBSD.org The www/node port has been updated to Node.js v16.0.0, the latest upstream release. This is a major release, including many significant changes. Users are encouraged to read the release announcements before upgrading: https://nodejs.org/en/blog/release/v16.0.0/ 20210416: AFFECTS: Users of shells/bash, shells/bash-static with PORTS_READLINE=off AUTHOR: olce.freebsd@certner.fr Bundled readline now will use LOCALBASE/etc/inputrc as its ultimate default inputrc file (instead of /etc/inputrc). This puts these ports in line with what devel/readline has been doing recently (since 20210103). 20210414: AFFECTS: users of graphics/OpenEXR or graphics/ilmbase AUTHOR: mandree@FreeBSD.org graphics/ilmbase was removed in favor of math/Imath 3.0.1, and graphics/OpenEXR was updated to 3.0.1. Ports that depend on OpenEXR and/or ilmbase according to INDEX were patched, for ports where OpenEXR is an option that defaults to off, these typical items needs to be changed - file bug reports in that case, preferably with tested patches: - The IlmBase parts Imath and half are now repackaged as Imath - The IlmThread and Iex libraries are now part of OpenEXR - Some header files were rearranged accordingly, into ${LOCALBASE}/include/OpenEXR vs. ${LOCALBASE}/include/Imath - Some code needs a few #include statements added, often #include or #include - Some classes were removed, and the C++11 standard library features need to be used, f. i. std::numeric_limits. - Some code used Int64 or SInt64 should use uint64_t or int64_t. Detailed porting hints are available here: https://github.com/AcademySoftwareFoundation/Imath/blob/v3.0.1/docs/PortingGuide2-3.md 20210411: AFFECTS: users or devel/py-RPyC AUTHOR: skozlov@FreeBSD.org devel/py-RPyC has been updated to version 5.0.1, which have some incompatibilities with 4.x branch. Be sure to check them out before upgrading: https://rpyc.readthedocs.io/en/latest/changelog.html#backwards-incompatible 20210414: AFFECTS: users of x11-fonts/oldschool-pc-fonts AUTHOR: evgeniy@khramtsov.org x11-fonts/oldschool-pc-fonts has been upgraded to 2.2. This version changed names of many fonts. If you have configuration files with specific font names set, you need to update your configurations after upgrade. 20210406: AFFECTS: users of www/phpvirtualbox AUTHOR: dereks@lifeofadishwasher.com www/phpvirtualbox has been updated to version 6.1. This new version only supports version 6.1 of VirtualBox. Version 5.x of phpvirtualbox has been preserved as www/phpvirtualbox-legacy. If you require support for VirtualBox 5.x please install this version. Remember to copy your configuration file in the new legacy installation. 20210328: AFFECTS: users of www/caddy AUTHOR: adamw@FreeBSD.org The default locations for caddy runtime files have changed. - Caddy's runtime log is now /var/log/caddy/caddy.log (was /var/log/caddy.log) - Automatic SSL certs are now stored in /var/db/caddy/data/caddy (was /root/.local/share/caddy) - Configuration autosaves are now stored in /var/db/caddy/config/caddy (was /root/.config/caddy) You can change these defaults. See /usr/local/etc/rc.d/caddy for the list of settings. 20210322: AFFECTS: users of net/wireguard AUTHOR: decke@FreeBSD.org A wireguard kernel implementation supporting FreeBSD 12.1 and newer was added as net/wireguard-kmod recently. The new default for users of net/wireguard is the kernel module. If you experience problems with it you can switch back to wireguard-go by removing net/wireguard-kmod and making sure net/wireguard-go is installed. The userland tools wg-quick(8) and wg(8) try to use kernel support if the kernel module is available and otherwise fall back to wireguard-go automatically. Config files are fully compatible. 20210317: AFFECTS: users of security/strongswan AUTHOR: driesm@FreeBSD.org The stroke starter interface has been deprecated by upstream for some time now. The default interface for controlling the charon daemon has switched from stroke to vici. Users still using the legacy config files such as ipsec.conf and ipsec.secret (stroke, starter) can easily revert to the old behavior by: # sysrc strongswan_interface="stroke" It is recommended to use the vici interface which is configured by swanctl.conf. Check : https://wiki.strongswan.org/projects/strongswan/wiki/Fromipsecconf to ease the transition from ipsec.* to swanctl.conf 20210313: AFFECTS: users of net-mgmt/phpipam AUTHOR: marko.cupac@mimar.rs ipaddresses table in phpipam database is likely to contain incorrect datetime values which prevent successful upgrade. Make sure to create backup of phpipam database. Before starting upgrade wizard in web interface run the following SQL query on phpipam database: UPDATE ipaddresses SET lastSeen='1970-01-01 00:00:01' WHERE lastSeen < '0000-01-01 00:00:00'; 20210310: AFFECTS: users of textproc/redisearch AUTHOR: osa@FreeBSD.org The textproc/redisearch port has been updated to the recent stable release - v2.0. Users wanting to stay on v1.6 can replace textproc/redisearch with textproc/redisearch16 with one of the following commands: # pkg install textproc/redisearch16 or # portmaster -o textproc/redisearch16 textproc/redisearch or # portupgrade -o textproc/redisearch16 textproc/redisearch NOTE: The textproc/redisearch16 brings a new name for the module, i.e. redisearch16.so, so be careful. 20210309: AFFECTS: users of emulators/virtualbox-ose AUTHOR: madpilot@FreeBSD.org emulators/virtualbox-ose has been updated to 6.1.18. This new version only works on amd64 hardware. Previous version 5.x of the virtualbox ports have been preserved as emulators/virtualbox-ose-legacy and similarly named ports for the other parts. If you can't run the latest version or wish to stay with the old version, please install the legacy ports. Also the additions at present build successfully only for amd64. If you need i386 additions you can fallback to the old legacy ones. NOTE: There is no support for moving saved running machine states across major updates of virtualbox. It is recommended to properly shutdown all virtual machines before upgrading. Otherwise the saved state can simply be discarded after the upgrade, if it's not important to preserve it. It should also be possible to downgrade to the legacy ports and shutdown the machine properly from the saved state and then upgrade back again. 20210302: AFFECTS: users of editors/emacs-devel AUTHOR: jrm@FreeBSD.org If you get the error "Symbol's value as variable is void: minor-modes", rebuild the offending Emacs packages. See https://lists.gnu.org/archive/html/emacs-devel/2021-02/msg01164.html for details. 20210220: AFFECTS: users of math/py-mathics AUTHOR: thierry@FreeBSD.org math/py-mathics has been split into several ports, and Mathics Core only provides a rudimentary command-line shell called mathics. To get the same functionality as in 1.x, you need to install either mathicsscript or Mathics-Django. 20210219: AFFECTS: users of games/mangband AUTHOR: adridg@FreeBSD.org The client has updated from 1.1.3 (which has a single public server left) to the current 1.5.3 (which has more public servers). If you update, you can NOT connect to the old server any more. Remember to finish your game before updating. 20210210: AFFECTS: users of audio/spotifyd AUTHOR: rodrigo@FreeBSD.org The configuration format for audio/spotifyd is now TOML, make sure to update your configuration file after upgrading the port. Look at the sample configuration file for a working example. https://github.com/Spotifyd/spotifyd/blob/master/docs/src/config/File.md 20210208: AFFECTS: users of mail/mailscanner AUTHOR: crees@FreeBSD.org The clamavmodule has finally been removed after a long deprecation period. Please remove all references to it in your mailscanner.conf as it will now count as a syntax error and may stop MailScanner starting! 20210204: AFFECTS: users of www/unit AUTHOR: osa@FreeBSD.org The default location for NGINX Unit's state directory has changed. It was moved from /usr/local/libexec/unit to /var/db/unit in order to avoid write operations on /usr/local filesystem. 20210130: AFFECTS: users of graphics/opencv-core AUTHOR: tcberner@FreeBSD.org graphics/opencv-core has been reintegrated into graphics/opencv. So there is no longer a circular dependency opencv-core -> ffmpeg -> opencv If you experience problems updating the packages, try pkg delete -f opencv-core 20210124: AFFECTS: users of net-mgmt/netbox AUTHOR: kai@FreeBSD.org The Django templating language (DTL) is no longer supported for export templates. Please ensure that all export templates use Jinja2 before upgrading. Also the support for embedded graphs was completely removed and several changes to the REST API were made. Please check the changelogs for further details. 20210114: AFFECTS: users of net-im/matterircd AUTHOR: norrland@nullbyte.se Commandline switches Switched to viper for cmdline parsing, which does not support "short" flags. You'll need to use --flag instead of -flag. Eg ./matterircd --debug Bridge specific configuration is now only in configuration file. This means the following flags have been removed: -restrict,-mmteam,-mmserver, -mminsecure,-mmskiptlsverify. You can set those in matterircd.toml, see the example file. Config changes BlacklistUser feature for slack has been renamed to DenyUsers. JoinMpImOnTalk feature has been renamed to JoinDM and is available for slack/mattermost JoinInclude, JoinExclude now support regexp (see matterircd.toml.example) 20210113: AFFECTS: users of databases/redis[-devel] AUTHOR: osa@FreeBSD.org The databases/redis port has been updated to the recent stable release. Users wanting to stay on v5.x can replace databases/redis with databases/redis5 with one of the following commands: # pkg install databases/redis5 or # portmaster -o databases/redis5 databases/redis or # portupgrade -o databases/redis5 databases/redis