From 3e4bead32161604c08e2dcae1acea695db851f34 Mon Sep 17 00:00:00 2001
From: Dario Nieuwenhuis <dirbaio@dirbaio.net>
Date: Mon, 30 May 2022 00:36:30 +0200
Subject: stm32: add USB driver.

---
 examples/stm32f3/src/bin/usb_serial.rs | 116 +++++++++++++++++++++++++++++++++
 1 file changed, 116 insertions(+)
 create mode 100644 examples/stm32f3/src/bin/usb_serial.rs

(limited to 'examples/stm32f3/src/bin')

diff --git a/examples/stm32f3/src/bin/usb_serial.rs b/examples/stm32f3/src/bin/usb_serial.rs
new file mode 100644
index 00000000..fc33d0bc
--- /dev/null
+++ b/examples/stm32f3/src/bin/usb_serial.rs
@@ -0,0 +1,116 @@
+#![no_std]
+#![no_main]
+#![feature(type_alias_impl_trait)]
+
+use defmt::panic;
+use defmt::*;
+use defmt_rtt as _; // global logger
+use embassy::executor::Spawner;
+use embassy::time::Duration;
+use embassy::time::Timer;
+use embassy_stm32::gpio::Level;
+use embassy_stm32::gpio::Output;
+use embassy_stm32::gpio::Speed;
+use embassy_stm32::interrupt;
+use embassy_stm32::time::U32Ext;
+use embassy_stm32::usb::{Driver, Instance};
+use embassy_stm32::{Config, Peripherals};
+use embassy_usb::driver::EndpointError;
+use embassy_usb::Builder;
+use embassy_usb_serial::{CdcAcmClass, State};
+use futures::future::join;
+use panic_probe as _;
+
+fn config() -> Config {
+    let mut config = Config::default();
+
+    config.rcc.hse = Some(8.mhz().into());
+    config.rcc.sysclk = Some(48.mhz().into());
+    config.rcc.pclk1 = Some(24.mhz().into());
+    config.rcc.pclk2 = Some(24.mhz().into());
+    config.rcc.pll48 = true;
+
+    config
+}
+
+#[embassy::main(config = "config()")]
+async fn main(_spawner: Spawner, p: Peripherals) {
+    info!("Hello World!");
+
+    // Needed for nucleo-stm32f303ze
+    let mut dp_pullup = Output::new(p.PG6, Level::Low, Speed::Medium);
+    Timer::after(Duration::from_millis(10)).await;
+    dp_pullup.set_high();
+
+    // Create the driver, from the HAL.
+    let irq = interrupt::take!(USB_LP_CAN_RX0);
+    let driver = Driver::new(p.USB, irq, p.PA12, p.PA11);
+
+    // Create embassy-usb Config
+    let config = embassy_usb::Config::new(0xc0de, 0xcafe);
+
+    // Create embassy-usb DeviceBuilder using the driver and config.
+    // It needs some buffers for building the descriptors.
+    let mut device_descriptor = [0; 256];
+    let mut config_descriptor = [0; 256];
+    let mut bos_descriptor = [0; 256];
+    let mut control_buf = [0; 7];
+
+    let mut state = State::new();
+
+    let mut builder = Builder::new(
+        driver,
+        config,
+        &mut device_descriptor,
+        &mut config_descriptor,
+        &mut bos_descriptor,
+        &mut control_buf,
+        None,
+    );
+
+    // Create classes on the builder.
+    let mut class = CdcAcmClass::new(&mut builder, &mut state, 64);
+
+    // Build the builder.
+    let mut usb = builder.build();
+
+    // Run the USB device.
+    let usb_fut = usb.run();
+
+    // Do stuff with the class!
+    let echo_fut = async {
+        loop {
+            class.wait_connection().await;
+            info!("Connected");
+            let _ = echo(&mut class).await;
+            info!("Disconnected");
+        }
+    };
+
+    // Run everything concurrently.
+    // If we had made everything `'static` above instead, we could do this using separate tasks instead.
+    join(usb_fut, echo_fut).await;
+}
+
+struct Disconnected {}
+
+impl From<EndpointError> for Disconnected {
+    fn from(val: EndpointError) -> Self {
+        match val {
+            EndpointError::BufferOverflow => panic!("Buffer overflow"),
+            EndpointError::Disabled => Disconnected {},
+        }
+    }
+}
+
+async fn echo<'d, T: Instance + 'd>(
+    class: &mut CdcAcmClass<'d, Driver<'d, T>>,
+) -> Result<(), Disconnected> {
+    let mut buf = [0; 64];
+    loop {
+        let n = class.read_packet(&mut buf).await?;
+        let data = &buf[..n];
+        info!("data: {:x}", data);
+        class.write_packet(data).await?;
+    }
+}
-- 
cgit v1.2.3