| Age | Commit message (Collapse) | Author |
|---|
|
Switch to using the new config_file_walk() helper in config_save() and
update existing configuration variables instead of blindly overwriting
the existing configuration file.
Note: This breaks configuration setting storage if one or more settings
are missing in the configuration file. We need to refactor our parser
and serialization routines another time before this can be implemented
properly, though.
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
Add config_serialize_conf() which can be used to serialize the value of
a configuration setting (counterpart to config_parse_conf()).
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
This can be used if we care about junk, such as empty lines and
comments. Currently unused since we skip these when parsing
configuration settings. This makes sense if we want to make slight
modifications to the configuration file without losing formatting and
comments, though.
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
This adds one level of abstraction to config_load() by splitting out the
actual reading routine and the variable setter into two separate
functions. config_file_walk() can be used to read the configuration
file, strip comments and pass every key/value pair to a callback.
config_load_cb() is the new callback used in config_load().
Rationale: It makes sense to reuse the key/value parser to allow for a
much saner config_save() routine that changes single values only instead
of rewriting (and overwriting) the whole configuration file every time.
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
Make sure we don't return bogus list elements if negative indexes are
used in llist_{,find_}nth(). Bail out early and return NULL instead.
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
We added count prefix support to motion commands in commit
59e006e56d9f893506af56a4ca114fe53b537e49 but obviously forgot to check
whether the range checks in calendar_move() still work correctly.
Refactor out range checks and replace them by a single check that is
performed *after* the new date is computed, but before we assign the new
value to the actual selected date. This ensures we won't have to bother
about these again when changing/adding functionality in/to
calendar_move(), while keeping performance (date_change() is pretty
cheap and range violations are corner cases anyway).
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
We currently use this in one place only but might reuse this a couple of
times later (when migrating to libical).
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
Extract iCal and pcal import/export routines into separate files. This
reduces complexity of the super huge "io.c" source file and makes it
easier to follow changes that affect the iCal and pcal routines only
(commits affecting both formats are very uncommon).
Before:
$ wc -l src/io.c
2938 src/io.c
After:
$ wc -l src/{io,ical,pcal}.c
1445 src/io.c
1263 src/ical.c
317 src/pcal.c
3025 total
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
Signed-off-by: Baptiste Jonglez <baptiste@jonglez.org>
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
Commit 4ff3bb9d introduced a new format for parsing durations, thus
allowing a larger string to be retrieved from user input.
However, the string used is still declared with the old length,
leading to crashes when compiling with stack-smashing protection
features (the default on Archlinux). Inputting a duration string of
more than 8 characters (such as "+1d11h11m") would crash calcurse with
a *** stack smashing detected *** message.
Using a larger string from the start fixes the bug.
Signed-off-by: Baptiste Jonglez <baptiste@jonglez.org>
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
Conflicts:
src/io.c
|
|
Use days/hours/minutes/seconds instead of seconds in the DURATION field.
It fixes interaction with other softwares like phpicalendar.
Lukas: Remove use of dur-week. RFC 5545 states that you cannot use this
in conjunction with dur-day. Also, fix formatting and use proper
constants.
Signed-off-by: Jerome Pinot <ngc891@gmail.com>
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
We used different naming schemes in versions prior to 1.8. Given that
calcurse 1.8 has been released more than 4.5 years ago, remove the
legacy code that still handles these. Users upgrading from <1.8 to 3.0.0
might need to convert the appropriate config file variable manually.
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
This patch kind of reverts what we did in commit
6377582841118688aee13aff98c9216403582e45. We were a tad off-base there
since using a map doesn't improve maintainability, really. Using
strcmp() at a central location seems perfectly fine and doesn't have the
overhead of the map scanning algorithm.
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
We used custom_load_conf() to load the configuration file and
io_save_conf() to save configuration. Move these functions, including
all helpers, to a central location.
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
We support all simple escape sequences listed in the ANSI C standard,
plus "\0" to allow for printing null characters.
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
|
|
This allows using "%%" to print the '%' character.
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
This is superseded by custom format strings.
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
Following long command line options can be used to override the default
format strings:
* --format-apt
* --format-recur-apt
* --format-event
* --format-recur-event
* --format-todo
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
* Move print_notefile() from "src/args.c" to "src/utils.c".
* Add a "%N" format specifier to print_*(). This invokes
print_notefile() and prints the content of an item's note file.
* src/args.c: Use the new format specifier instead of print_notefile()
everywhere.
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
This goes in line with the other commits adding print_*() support.
Following format specifiers are allowed:
* p: Print the priority of the item
* m: Print the description of the item
* n: Print the name of the note file belonging to the item
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
This one is hackish, obsolete and no longer used by any other function.
Drop it!
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
Add print_recur_apoint() and print_recur_event() helper functions to
print recurrent items to stdout and use them everywhere. Currently,
these are only wrapper functions to print_apoint() and print_event()
that create temporary, non-recurrent items.
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
Add a flexible helper function print_event() and use it whenever we
print events to stdout. This reduces the number of copy-pasted code and
eventually allows for specifying custom format strings.
Following format specifiers are supported:
* m: Print the description of the item
* n: Print the name of the note file belonging to the item
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
Add a flexible helper function print_apoint() and use it whenever we
print appointments to stdout. This reduces the number of copy-pasted
code and eventually allows for specifying custom format strings.
Following format specifiers are supported:
* s: Print the start time of the appointment as UNIX time stamp
* S: Print the start time of the appointment using the "hh:mm" format
* d: Print the duration of the appointment in seconds
* e: Print the end time of the appointment as UNIX time stamp
* E: Print the end time of the appointment using the "hh:mm" format
* m: Print the description of the item
* n: Print the name of the note file belonging to the item
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
This is no longer needed as of commit 2d89d336.
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
This is one of the few valid use cases for a global variable. No need to
make it pseudo-local and pass it from one function to another.
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
Conflicts:
src/calcurse.h
src/io.c
|
|
Use strncpy() and a proper limit, which ensures we never read more
characters than the buffer can hold. Also, ensure we always
null-terminate strings here.
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
Ensure we always return with a null-terminated buffer, even if we read
more than BUFSIZ characters.
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
No reason to use "return (x);" here. Refer to the GNU coding guidelines
for details. Created using following semantic patch:
@@
expression expr;
@@
- return (expr);
+ return expr;
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
Use this constant everywhere when referring to a null pointer instead of
casting 0 to various types of pointers. Created using following semantic
patch:
@@
type type;
@@
- (type *)0
+ NULL
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
A small style fix that removes all remaining "(void)" casts. Using these
isn't encouraged in GNU coding guidelines and doesn't serve a certain
purpose, except for satisfying a few static code analysis tools. We
already nuked some of these in previous patches, but this semantic patch
should fix what's left:
@@
identifier func;
@@
- (void)func (
+ func (
...);
Long lines were re-formatted manually.
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
Use one of the following functions where appropriate:
* puts() (whenever we print hard coded strings to stdout)
* fputs() (whenever we print hard coded strings to a stream)
* putchar() (whenever we print a single character to stdout)
* fputc() (whenever we print a single character to a stream)
* strncpy() (whenever we copy hard coded strings to a buffer)
This removes the overhead introduced by the format string parser and
reduces the number of false positive C-format strings spotted by
xgettext(1)'s heuristics.
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
Bail out early if we check for a date beyond the item's repetition end
date.
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
Rename recur_*_inday() to recur_*_find_occurrence() and use the new
functions whenever we actually care about the start time of an
occurrence.
Reintroduce recur_*_inday() as wrappers to recur_*_find_occurrence() and
pass NULL as start time buffer (which means "skip start time
calculation"). Keep using these when we only want to know if a recurrent
item belongs to a specific day but do not care about the actual start
time.
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
We have the option to enter either an end time or a duration when
creating an item - the same choice should be available when editing an
item.
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
Once the user picked any property to edit, we didn't give him any chance
to cancel editing. Abort if the user presses the escape key or enters an
empty string.
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
After our recur_item_inday() rewrite, this function is no longer used.
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
Completely rewrite our inday algorithm in recur_item_inday() and be more
fine-grained. This version can deal with recurrent multi-day
appointments unless they overlap.
In case of overlapping appointments, only the last appointment that
starts before the current day is shown. We will need to rewrite the
whole recur_item_inday() interface in order to fix this - this
relatively trivial patch is only the first step.
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
Enable "..:.." formatting for recurrent appointments that last beyond
midnight. Apart from our recurrent item handler being a tad broken,
there is no reason not to do the same thing we already do with regular
appointments here.
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
Having item's durations eventually allows for better parsing of
recurrent appointments as we might be interested in how many days are
covered by a multi-day appointment.
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
There is absolutely no reason to make events start on noon, 12:00.
Switching to 00:00 seems totally reasonable here, and makes event
handling a bit easier, also.
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
Nasty off-by-one error here. An event should be associated with a day if
it starts at 12:00 a.m. and shouldn't be associated if it enters the
next day.
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
|
Fix help texts to vaguely match the new duration string formats.
Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
|
