path: root/setup-disk.in

#!/bin/sh

PREFIX=
. "$PREFIX/lib/libalpine.sh"

MBR=${MBR:-"/usr/share/syslinux/mbr.bin"}
ROOTFS=${ROOTFS:-ext4}
BOOTFS=${BOOTFS:-ext4}

in_list() {
	local i="$1"
	shift
	while [ $# -gt 0 ]; do
		[ "$i" = "$1" ] && return 0
		shift
	done
	return 1
}

all_in_list() {
	local needle="$1"
	local i
	[ -z "$needle" ] && return 1
	shift
	for i in $needle; do
		in_list "$i" $@ || return 1
	done
	return 0
}

# wrapper to only show given device
_blkid() {
	blkid | grep "^$1:"
}

# if given device have an UUID display it, otherwise return the device
uuid_or_device() {
	local i=
	case "$1" in
		/dev/md*) echo "$1" && return 0;;
	esac
	for i in $(_blkid "$1"); do
		case "$i" in
			UUID=*) eval $i;;
		esac
	done
	if [ -n "$UUID" ]; then
		echo "UUID=$UUID"
	else
		echo "$1"
	fi
}

# generate an fstab from a given mountpoint. Convert to UUID if possible
enumerate_fstab() {
	local mnt="$1"
	local fs_spec= fs_file= fs_vfstype= fs_mntops= fs_freq= fs_passno=
	[ -z "$mnt" ] && return
	local escaped_mnt=$(echo $mnt | sed 's:/:\\/:g')
	awk "\$2 ~ /^$escaped_mnt/ {print \$0}" /proc/mounts | \
		sed "s:$mnt:/:g; s: :\t:g" | sed 's:/\+:/:g' | \
		while read fs_spec fs_file fs_vfstype fs_mntops fs_freq fs_passno; do
			echo -e "$(uuid_or_device $fs_spec)\t${fs_file}\t${fs_vfstype}\t${fs_mntops} ${fs_freq} ${fs_passno}"
		done
}

is_vmware() {
	grep -q VMware /proc/scsi/scsi 2>/dev/null \
		|| grep -q VMware /proc/ide/hd*/model 2>/dev/null
}

is_xen() {
	[ -d /proc/xen ]
}

# return true (0) if given device is lvm
is_lvm() {
	lvs "$1" >/dev/null 2>&1
}

# Find the disk device from given partition
disk_from_part() {
	# we need convert cciss/c0d0* cciss!c0d0*...
	local i= part=$(echo ${1#/dev/} | sed 's:/:!:g')
	for i in /sys/block/*/$part; do
		i=${i%/*}
		# ...and back from cciss!c0d0 to cciss/c0d0
		if [ -b "/dev/${i##*/}" ]; then
			echo "/dev/${i##*/}" | sed 's:!:/:g'
			return 0
		fi
	done
	return 1
}

unpack_apkovl() {
	local ovl="$1"
	local dest="$2"
	local suffix=${ovl##*.}
	local i
	ovlfiles=/tmp/ovlfiles
	if [ "$suffix" = "gz" ]; then
		if ! tar -C "$dest" --numeric-owner -zxvf "$ovl" > $ovlfiles; then
			echo -n "Continue anyway? [Y/n]: "
			read i
			case "$i" in
				n*|N*) return 1;;
			esac
		fi
		return 0 
	fi

	apk add -q openssl

	if ! openssl list-cipher-commands | grep "^$suffix$" > /dev/null; then
		errstr="Cipher $suffix is not supported"
		return 1
	fi
	local count=0
	# beep
	echo -e "\007"
	while [ $count -lt 3 ]; do
		openssl enc -d -$suffix -in "$ovl" | tar --numeric-owner \
			-C "$dest" -zxv >$ovlfiles 2>/dev/null && return 0
		count=$(( $count + 1 ))
	done
	ovlfiles=
	return 1
}

# find filesystem of given mounted dir
find_mount_fs() {
	local mount_point="$1"
	awk "\$2 == \"$mount_point\" {print \$3}" /proc/mounts | tail -n 1
}

# find device for given mounted dir
find_mount_dev() {
	local mnt="$1"
	awk "\$2 == \"$mnt\" { print \$1 }" /proc/mounts | tail -n 1
}

supported_boot_fs() {
	local supported="ext2 ext3 ext4 btrfs"
	local fs=
	for fs in $supported; do
		[ "$fs" = "$1" ] && return 0
	done
	echo "$1 is not supported. Only supported are: $supported" >&2
	return 1
}

find_volume_group() {
	local lv=${1##*/}
	lvs --noheadings "$1" | awk "\$1 == \"$lv\" {print \$2}"
}

find_pvs_in_vg() {
	local vg="$1"
	pvs --noheadings | awk "\$2 == \"$vg\" {print \$1}"
}

install_mounted_root() {
	local mnt="$1" mnt_boot="$1" boot_fs= root_fs=
	local initfs_features="ata base ide scsi usb virtio"
	local pvs= dev= rootdev= bootdev= raidopt=

	rootdev=$(find_mount_dev "$mnt")
	if [ -z "$rootdev" ]; then
		echo "$mnt does not seem to be a mount point" >&2
		return 1
	fi
	root_fs=$(find_mount_fs "$mnt")
	initfs_features="$initfs_features $root_fs"

	if is_lvm "$rootdev"; then
		initfs_features="$initfs_features lvm"
		local vg=$(find_volume_group "$rootdev")
		pvs=$(find_pvs_in_vg $vg)
	fi


	bootdev=$(find_mount_dev "$mnt"/boot)
	if [ -z "$bootdev" ]; then
		bootdev=$rootdev
	else
		mnt_boot="$mnt"/boot
		bootdev=$(find_mount_dev "$mnt_boot")
	fi
	boot_fs=$(find_mount_fs "$mnt_boot")
	supported_boot_fs "$boot_fs" || return 1

	if [ -e "/sys/block/${bootdev#/dev/}/md" ]; then
		raidopt="--raid"
	fi

	for dev in $rootdev $pvs; do
		[ -e "/sys/block/${dev#/dev/}/md" ] || continue

		local md=${dev#/dev/}
		initfs_features="$(echo $initfs_features | sed 's/raid//') raid"
		local level=$(cat /sys/block/$md/md/level)
		case "$level" in
			raid1) raidmod="$raidmod,$level";;
			raid[456]) raidmod="$raidmod,raid456";;
		esac
	done
	if [ -n "$VERBOSE" ]; then
		echo "Root device:     $rootdev"
		echo "Root filesystem: $root_fs"
		echo "Boot device:     $bootdev"
		echo "Boot filesystem: $boot_fs"
	fi

	if [ -z "$APKOVL" ]; then
		ovlfiles=/tmp/ovlfiles
		lbu package - | tar -C "$mnt" -zxv > "$ovlfiles"
	else
		echo "Restoring backup from $APKOVL to $rootdev..."
		unpack_apkovl "$APKOVL" "$mnt" || return 1
	fi

	# generate mkinitfs.conf
	mkdir -p "$mnt"/etc/mkinitfs/files.d
	echo "features=\"$initfs_features\"" > "$mnt"/etc/mkinitfs/mkinitfs.conf
	if [ -n "$raidmod" ]; then
		echo "/sbin/mdadm" > "$mnt"/etc/mkinitfs/files.d/raid
		echo "/etc/mdadm.conf" >> "$mnt"/etc/mkinitfs/files.d/raid
	fi

	# generate the fstab
	if [ -f "$mnt"/etc/fstab ]; then
		mv "$mnt"/etc/fstab "$mnt"/etc/fstab.old
	fi
	enumerate_fstab "$mnt" >> "$mnt"/etc/fstab
	cat >>"$mnt"/etc/fstab <<EOF
/dev/cdrom	/media/cdrom	iso9660	noauto,ro 0 0
/dev/fd0	/media/floppy	vfat	noauto	0 0
/dev/usbdisk	/media/usb	vfat	noauto	0 0
EOF

	# remove the installed db in case its there so we force re-install
	rm -f "$mnt"/var/lib/apk/installed "$mnt"/lib/apk/db/installed
	echo "Installing system on $rootdev:"
	# apk reads config from target root so we need to copy the config
	mkdir -p "$mnt"/etc/apk/keys/
	cp /etc/apk/keys/* "$mnt"/etc/apk/keys/


	local apkflags="--initdb --quiet --progress --update-cache --clean-protected"
	local pkgs=$(cat "$mnt"/etc/apk/world "$mnt"/var/lib/apk/world 2>/dev/null)
	pkgs="$pkgs acct linux-$KERNEL_FLAVOR alpine-base"
	local repos=$(sed -e 's/\#.*//' /etc/apk/repositories)
	local repoflags=
	for i in $repos; do
		repoflags="$repoflags --repository $i"
	done
	
	apk add --root "$mnt" $apkflags --overlay-from-stdin \
		$repoflags $pkgs <$ovlfiles>/dev/null || return 1
	echo ""

	# make things bootable
	if is_vmware; then
		pax_nouderef="pax_nouderef "
	else
		pax_nouderef=
	fi

	if is_xen; then
		# create a menu.lst
		mkdir -p "$mnt"/boot/grub
		cat >"$mnt"/boot/grub/menu.lst <<EOF
default 0
title $KERNEL_FLAVOR
root (hd0,0)
kernel /boot/$KERNEL_FLAVOR root=$(uuid_or_device $rootdev) modules=${root_fs}${raidmod} quiet xen BOOT_IMAGE=/boot/$KERNEL_FLAVOR
initrd=/boot/initramfs-$KERNEL_FLAVOR
EOF
	else
		# create an extlinux.conf
		cat >"$mnt"/boot/extlinux.conf <<EOF
timeout 20
prompt 1
default $KERNEL_FLAVOR
label $KERNEL_FLAVOR
	kernel /boot/vmlinuz-$KERNEL_FLAVOR
	append initrd=/boot/initramfs-$KERNEL_FLAVOR root=$(uuid_or_device $rootdev) modules=sd-mod,usb-storage,${root_fs}${raidmod} ${pax_nouderef}quiet
EOF
	fi

	is_xen || extlinux $raidopt --install "$mnt"/boot
}

unmount_partitions() {
	local mnt="$1"

	# unmount the partitions
	umount $(awk '{print $2}' /proc/mounts | grep ^"$mnt" | sort -r)
}

# figure out decent default swap size in mega bytes
find_swap_size() {
	if [ -n "$SWAP_SIZE" ]; then
		return
	fi
	local memtotal_kb=$(awk '$1 == "MemTotal:" {print $2}' /proc/meminfo)
	# use 2 * avaiable ram
	echo $(( $memtotal_kb * 2 / 1024 ))
}

has_mounted_part() {
	local p
	# parse /proc/mounts for mounted devices
	for p in $(awk '$1 ~ /^\/dev\// {gsub("/dev/", "", $1); print $1}' \
			/proc/mounts); do
		[ "$p" = "$1" ] && return 0
		[ -e /sys/block/$1/$p ] && return 0
	done
	return 1
}

has_holders() {
	local i
	# check if device is used by any md devices
	for i in $1/holders/* $1/*/holders/*; do
		[ -e "$i" ] && return 0
	done
	return 1
}

is_available_disk() {
	local dev=$1
	local b=$(echo $p | sed 's:/:!:g')

	# check if its a "root" block device and not a partition
	[ -e /sys/block/$b ] || return 1
	
	# check so it does not have mounted partitions
	has_mounted_part $dev && return 1

	# check so its not part of an md setup
	if has_holders /sys/block/$b; then
		[ -n "$USE_RAID" ] && echo "Warning: $dev is part of a running raid" >&2
		return 1
	fi

	# check so its not an md device
	[ -e /sys/block/$b/md ] && return 1

	return 0
}

find_disks() {
	local p=
	for p in $(awk '$1 ~ /[0-9]+/ {print $4}' /proc/partitions); do
		is_available_disk $p && echo -n " $p"
	done
}

stop_all_raid() {
	local rd
	for rd in /dev/md*; do
		[ -b $rd ] && mdadm --stop $rd
	done
}

# install needed programs
init_progs() {
	local raidpkg=
	[ -n "$USE_RAID" ] && raidpkg="mdadm"
	apk add -q sfdisk e2fsprogs lvm2 $raidpkg syslinux $@
}

show_disk_info() {
	local disk= vendor= model= d= size=
	for disk in $@; do
		d=${disk##*/}
		vendor=$(cat /sys/block/$d/device/vendor 2>/dev/null)
		model=$(cat /sys/block/$d/device/model 2>/dev/null)
		size=$(awk '{gb = ($1 * 512)/1000000000; printf "%.1f GB\n", gb}' /sys/block/$d/size 2>/dev/null)
		echo "  $d	($size $vendor $model)"
	done
}

confirm_erase() {
	local answer=
	echo "WARNING: The following disk(s) will be erased:"
	show_disk_info $@
	echo -n "WARNING: Erase the above disk(s) and continue? [y/N]: "
	
	read answer
	case "$answer" in
		y*|Y*) return 0;;
	esac
	return 1
}

# setup disk dev in $1 for LVM usage.
# usage: setup_partitions <diskdev> size1,type1 [size2,type2 ...] 
setup_partitions() {
	local diskdev="$1"
	shift

	echo "Initializing partitions on $diskdev..."

	# new disks does not have an DOS signature in sector 0
	# this makes sfdisk complain. We can workaround this by letting
	# fdisk create that DOS signature, by just do a "w", a write.
	# http://bugs.alpinelinux.org/issues/show/145
	echo "w" | fdisk $diskdev >/dev/null

	# fix the MBR while here so extlinux can boot
	cat "$MBR" > $diskdev

	local start=0
	local line=
	# create new partitions
	(
		for line in "$@"; do
			echo "$start,$line"
			start=
		done
	) | sfdisk -q -L -uM $diskdev >>/tmp/sfdisk.out || return 1

	# create device nodes if not exist
	mdev -s
}

# find the bootable partition on given disk
find_boot_partition() {
	sfdisk -d $1 | awk '/bootable/ {print $1}'
}

# find the partition(s) for LVM
# this is not marked as bootable and is type 8e
find_lvm_partition() {
	local type=8e
	sfdisk -d $1 | grep -v bootable | awk "/Id=$type/ {print \$1}"
}

# set up boot device. We only use raid1 for boot devices if any raid
setup_boot_dev() {
	local disk= bootdev=
	local part=$(for disk in $@; do find_boot_partition $disk; done)
	set -- $part
	bootdev=$1
	[ -z "$bootdev" ] && return 1
	echo "Creating file systems..."
	if [ -n "$USE_RAID" ]; then
		local missing=
		local num=$#
		if [ $# -eq 1 ]; then
			missing="missing"
			num=2
		fi
		mdadm --create /dev/md0 --level=1 --raid-devices=$num \
			--metadata=0.90 --quiet --run $@ $missing || return 1
		bootdev=/dev/md0
	fi
	mkfs.$BOOTFS -q $bootdev
	BOOT_DEV="$bootdev"
}

# $1 = index
# $2 = partition type
# $3... = disk devices
find_nth_non_boot_parts() {
	local idx=$1
	local id=$2
	local disk=
	shift
	shift
	for disk in $@; do
		sfdisk -d $disk | grep -v bootable \
			| awk "/Id=$id/ { i++; if (i==$idx) print \$1 }"
	done
}

setup_non_boot_raid_dev() {
	local md_dev=$1
	local idx=${md_dev#/dev/md}
	shift
	local level=1
	local numdevs=$#
	local missing=
	local raid_parts=$(find_nth_non_boot_parts $idx "fd" $@)
	set -- $raid_parts
	# how many disks do we have?
	case $# in
		0) echo "No Raid partitions found" >&2; return 1;;
		1) level=1; missing="missing"; num=2;;
		2) level=1; missing=  ; num=2;;
		*) level=5; missing=  ; num=$#;;
	esac
	mdadm --create /dev/md$idx --level=$level --raid-devices=$num \
		--quiet --run $@ $missing || return 1
}

# setup device for lvm, create raid array if needed
setup_lvm_volume_group() {
	local vgname="$1"
	shift
	local lvmdev=

	if [ -n "$USE_RAID" ]; then
		setup_non_boot_raid_dev /dev/md1 $@ || return 1
		lvmdev=/dev/md1
	else	
		lvmdev=$(find_lvm_partition $1)
	fi

	# be quiet on success
	local errmsg=$(dd if=/dev/zero of=$lvmdev bs=1k count=1 2>&1) \
		|| echo "$errmsg"
	pvcreate --quiet $lvmdev \
		&& vgcreate --quiet $vgname $lvmdev >/dev/null
}

# set up swap on given device(s)
setup_swap_dev() {
	local swap_dev=
	sed -i -e '/swap/d' /etc/fstab
	for swap_dev in "$@"; do
		mkswap $swap_dev >/dev/null
		echo -e "$swap_dev\tswap\t\tswap\tdefaults 0 0" >> /etc/fstab
	done
	swapon -a
	rc-update --quiet add swap boot
}

# setup and enable swap on given volumegroup if needed
setup_lvm_swap() {
	local vgname="$1"
	local swapname=lv_swap
	if [ -z "$SWAP_SIZE" ] || [ "$SWAP_SIZE" -eq 0 ]; then
		return
	fi
	lvcreate --quiet -n $swapname -L ${SWAP_SIZE}MB $vgname
	setup_swap_dev /dev/$vgname/$swapname
}

# if /var is mounted, move out data and umount it
reset_var() {
	[ -z "$(find_mount_dev /var)" ] && return 0
	mkdir /.var
	mv /var/* /.var/ 2>/dev/null
	umount /var && 	rm -rf /var && mv /.var /var && rm -rf /var/lost+found
}

# set up /var on given device
setup_var() {
	local var_dev="$1"
	local varfs=ext4
	echo "Creating file systems..."
	mkfs.$varfs -q $var_dev >/dev/null || return 1
	sed -i -e '/[[:space:]]\/var[[:space:]]/d' /etc/fstab
	echo -e "${var_dev}\t/var\t\t${varfs}\tdefaults 1 2" >> /etc/fstab

	mv /var /.var
	mkdir /var
	mount /var
	mv /.var/* /var/
	rmdir /.var

	/etc/init.d/syslog --quiet restart
	setup_mdadm_conf
}

setup_mdadm_conf() {
	local mods= mod=
	if [ -n "$USE_RAID" ]; then
		mdadm --detail --scan > /etc/mdadm.conf
		rc-update --quiet add mdadm-raid boot
		mods=$(awk '/^raid/ {print $1}' /proc/modules)
		for mod in $mods; do
			if ! grep -q "^$mod" /etc/modules; then
				echo $mod >> /etc/modules
			fi
		done
	fi
}

data_only_disk_install_lvm() {
	local diskdev=
	local vgname=vg0
	local var_dev=/dev/$vgname/lv_var
	local lvm_part_type="8e"
	local raid_part_type="fd"
	local part_type=$lvm_part_type
	local size=

	init_progs || return 1
	confirm_erase $@ || return 1

	if [ "$USE_RAID" ]; then
		part_type=$raid_part_type
		stop_all_raid
	fi

	for diskdev in "$@"; do
		setup_partitions $diskdev "$size,$part_type" || return 1
	done
	
	setup_lvm_volume_group $vgname $@ || return 1
	setup_lvm_swap $vgname
	lvcreate --quiet -n ${var_dev##*/} -l 100%FREE $vgname
	setup_mdadm_conf
	rc-update add lvm boot
	setup_var $var_dev
}

data_only_disk_install() {
	local diskdev=
	local var_dev=/dev/$vgname/lv_var
	local var_part_type="8e"
	local swap_part_type=82
	local size=
	local swap_dev= var_dev=

	init_progs || return 1
	confirm_erase $@ || return 1

	if [ "$USE_RAID" ]; then
		var_part_type="fd"
		swap_part_type="fd"
		stop_all_raid
	fi

	for diskdev in "$@"; do
		setup_partitions $diskdev \
			"$SWAP_SIZE,$swap_part_type" \
			"$size,$var_part_type" || return 1
	done

	if [ "$USE_RAID" ]; then
		[ $SWAP_SIZE -gt 0 ] && setup_non_boot_raid_dev /dev/md1 $@
		setup_non_boot_raid_dev /dev/md2 $@ || return 1
		swap_dev=/dev/md1
		var_dev=/dev/md2
	else
		swap_dev=$(find_nth_non_boot_parts 1 82 $@)
		var_dev=$(find_nth_non_boot_parts 1 83 $@)
	fi
	[ $SWAP_SIZE -gt 0 ] && setup_swap_dev $swap_dev
	setup_var $var_dev
}

# setup 
setup_root() {
	local root_dev="$1" boot_dev="$2"
	mkfs.$ROOTFS -q "$root_dev"
	mkdir -p /mnt
	mount -t $ROOTFS $root_dev /mnt || return 1
	if [ -n "$boot_dev" ]; then
		mkdir -p /mnt/boot
		mount -t $BOOTFS $boot_dev /mnt/boot || return 1
	fi

	setup_mdadm_conf
	install_mounted_root /mnt || return 1
	unmount_partitions /mnt
	swapoff -a

	echo ""
	echo "Installation is complete. Please reboot."
}

native_disk_install_lvm() {
	local diskdev= vgname=vg0
	local lvm_part_type="8e"
	local raid_part_type="fd"
	local boot_part_type="83"
	local boot_size=${BOOT_SIZE:-100}
	local lvm_size=
	local root_dev=/dev/$vgname/lv_root

	init_progs syslinux || return 1
	confirm_erase $@ || return 1

	if [ -n "$USE_RAID" ]; then
		boot_part_type="fd"
		lvm_part_type="fd"
		stop_all_raid
	fi
	for diskdev in "$@"; do
		setup_partitions $diskdev \
			"$boot_size,$boot_part_type,*" \
			"$lvm_size,$lvm_part_type" || return 1
	done

	# will find BOOT_DEV for us
	setup_boot_dev $@

	setup_lvm_volume_group $vgname $@ || return 1
	setup_lvm_swap $vgname
	lvcreate --quiet -n ${root_dev##*/} -l 100%FREE $vgname
	rc-update add lvm boot
	setup_root $root_dev $BOOT_DEV
}

native_disk_install() {
	local root_part_type="83" swap_part_type="82" boot_part_type="83"
	local boot_size=${BOOT_SIZE:-100}
	local swap_size=${SWAP_SIZE}
	local root_size=
	local root_dev= boot_dev= swap_dev=

	init_progs syslinux || return 1
	confirm_erase $@ || return 1

	if [ -n "$USE_RAID" ]; then
		boot_part_type="fd"
		root_part_type="fd"
		swap_part_type="fd"
		stop_all_raid
	fi
	for diskdev in "$@"; do
		setup_partitions $diskdev \
			"$boot_size,$boot_part_type,*" \
			"$swap_size,$swap_part_type" \
			"$root_size,$root_part_type" \
			|| return 1
	done

	# will find BOOT_DEV for us
	setup_boot_dev $@
	
	if [ "$USE_RAID" ]; then
		[ $SWAP_SIZE -gt 0 ] && setup_non_boot_raid_dev /dev/md1 $@
		setup_non_boot_raid_dev /dev/md2 $@ || return 1
		swap_dev=/dev/md1
		root_dev=/dev/md2
	else
		swap_dev=$(find_nth_non_boot_parts 1 82 $@)
		root_dev=$(find_nth_non_boot_parts 1 83 $@)
	fi
	[ $SWAP_SIZE -gt 0 ] && setup_swap_dev $swap_dev
	setup_root $root_dev $BOOT_DEV
}

diskselect_help() {
	cat <<__EOF__

The disk you select can be used for a traditional disk install or for a
data-only install.

The disk will be erased.

Enter 'none' if you want to run diskless.

__EOF__
}

diskmode_help() {
	cat <<__EOF__

You can select between 'sys' or 'data'.

sys:
  This mode is a traditional disk install. The following partitions will be
  created on the disk: /boot, / (filesystem root) and swap.
    
  This mode may be used for development boxes, desktops, virtual servers, etc.

data:
  This mode uses your disk(s) for data storage, not for the operating system.
  The system itself will run from tmpfs (RAM).

  Use this mode if you only want to use the disk(s) for a mailspool, databases,
  logs, etc.

__EOF__
}

# ask for a root or data disk
# returns answer in global variable $answer
ask_disk() {
	local prompt="$1"
	local help_func="$2"
	local i=
	shift 2
	answer=
	local default_disk=${DEFAULT_DISK:-$1}

	while ! all_in_list "$answer" $@ "none" "abort"; do
		echo "Available disks are:"
		show_disk_info "$@"
		echon "$prompt [$default_disk] "
		default_read answer $default_disk
		case "$answer" in
			'abort') exit 0;;
			'none') return 0;;
			'?') $help_func;;
			*) for i in $answer; do
				if ! [ -b "/dev/$i" ]; then
					echo "/dev/$i is not a block device" >&2
					answer=
				   fi
			done;;
		esac
	done
}

usage() {
	cat <<__EOF__
usage: setup-disk [-hqr] [-k kernelflavor] [-m MODE] [-o apkovl] [-s SWAPSIZE]
		  [MOUNTPOINT | DISKDEV...]

Install alpine on harddisk.

If MOUNTPOINT is specified, then do a traditional disk install with MOUNTPOINT
as root.

If DISKDEV is specified, then use the specified disk(s) without asking. If
multiple disks are specified then set them up in a RAID array. If there are
mode than 2 disks, then use raid level 5 instead of raid level 1.

options:
 -h  Show this help
 -m  Use disk for MODE without asking, where MODE is either 'data' or 'root'
 -o  Restore system from given apkovl file
 -k  Use kernelflavor instead of $KERNEL_FLAVOR
 -L  Use LVM to manage partitions
 -q  Exit quietly if no disks are found
 -r  Enable software raid1 with single disk
 -s  Use SWAPSIZE MB instead of $SWAP_SIZE MB for swap (Use 0 to disable swap)
 -v  Be more verbose about what is happening
__EOF__
	exit 1
}

KERNEL_FLAVOR=grsec
case "$(uname -r)" in
	*-vs[0-9]*) KERNEL_FLAVOR=vserver;;
	*-pae) KERNEL_FLAVOR=pae;;
esac

DISK_MODE=
USE_LVM=
SWAP_SIZE=$(find_swap_size)
# Parse args
while getopts "hk:Lm:o:qrs:v" opt; do
	case $opt in
		m) DISK_MODE="$OPTARG";;
		k) KERNEL_FLAVOR="$OPTARG";;
		L) USE_LVM="_lvm";;
		o) APKOVL="$OPTARG";;
		q) QUIET=1;;
		r) USE_RAID=1;;
		s) SWAP_SIZE="$OPTARG";;
		v) VERBOSE=1;;
		*) usage;;
	esac
done
shift $(( $OPTIND - 1))

if [ -d "$1" ]; then
	# install to given mounted root
	apk add -q syslinux
	install_mounted_root "${1%/}"
	exit $?
fi

reset_var
swapoff -a

# stop all volume groups in use
vgchange --ignorelockingfailure -a n >/dev/null 2>&1

if [ -n "$USE_RAID" ]; then
	stop_all_raid
fi

disks=$(find_disks)
diskdevs=

# no disks so lets exit quietly.
if [ -z "$disks" ]; then
	[ -z "$QUIET" ] && echo "No disks found." >&2
	exit 0
fi

if [ $# -gt 0 ]; then
	# check that they are 
	for i in "$@"; do
		j=$(readlink -f "$i" | sed 's:^/dev/::; s:/:!:g')
		if ! [ -e "/sys/block/$j/device" ]; then
			echo "$i is not a suitable for partitioning"
			exit 1
		fi
		diskdevs="$diskdevs /dev/$j"
	done
else
	ask_disk "Which disk(s) would you like to use? (or '?' for help or 'none')" \
		diskselect_help $disks
	if [ "$answer" != none ]; then
		for i in $answer; do
			diskdevs="$diskdevs /dev/$i"
		done
	else
		DISK_MODE="none"
	fi
fi

if [ -n "$diskdevs" ] && [ -z "$DISK_MODE" ]; then
	answer=
	disk_is_or_disks_are="disk is"
	it_them="it"
	set -- $diskdevs
	if [ $# -gt 1 ]; then
		disk_is_or_disks_are="disks are"
		it_them="them"
	fi
		
	while true; do
		echo "The following $disk_is_or_disks_are selected:"
		show_disk_info $diskdevs
		echon "How would you like to use $it_them? ('sys', 'data' or '?' for help) [?] "
		default_read answer '?'
		case "$answer" in
		'?') diskmode_help;;
		sys|data) break;;
		esac
	done
	DISK_MODE="$answer"
fi

set -- $diskdevs
if [ $# -gt 1 ]; then
	USE_RAID=1
fi

dmesg -n1

# native disk install
case "$DISK_MODE" in
sys) native_disk_install$USE_LVM $diskdevs;;
data) data_only_disk_install$USE_LVM $diskdevs;;
none) exit 0;;
*) echo "Not a valid install mode: $DISK_MODE" >&2; exit 1;;
esac